summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-23regulator: change stubbed devm_regulator_get_enable to return OkMatti Vaittinen
The devm_regulator_get_enable() should be a 'call and forget' API, meaning, when it is used to enable the regulators, the API does not provide a handle to do any further control of the regulators. It gives no real benefit to return an error from the stub if CONFIG_REGULATOR is not set. On the contrary, returning and error is causing problems to drivers when hardware is such it works out just fine with no regulator control. Returning an error forces drivers to specifically handle the case where CONFIG_REGULATOR is not set, making the mere existence of the stub questionalble. Furthermore, the stub of the regulator_enable() seems to be returning Ok. Change the stub implementation for the devm_regulator_get_enable() to return Ok so drivers do not separately handle the case where the CONFIG_REGULATOR is not set. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reported-by: Aleksander Mazur <deweloper@wp.pl> Suggested-by: Guenter Roeck <linux@roeck-us.net> Fixes: da279e6965b3 ("regulator: Add devm helpers for get and enable") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/ZiYF6d1V1vSPcsJS@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-22Merge tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: "Five ksmbd server fixes, most also for stable: - rename fix - two fixes for potential out of bounds - fix for connections from MacOS (padding in close response) - fix for when to enable persistent handles" * tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: add continuous availability share parameter ksmbd: common: use struct_group_attr instead of struct_group for network_open_info ksmbd: clear RENAME_NOREPLACE before calling vfs_rename ksmbd: validate request buffer size in smb2_allocate_rsp_buf() ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
2024-04-23kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICEMiguel Ojeda
When KUnit tests are enabled, under very big kernel configurations (e.g. `allyesconfig`), we can trigger a `rustdoc` ICE [1]: RUSTDOC TK rust/kernel/lib.rs error: the compiler unexpectedly panicked. this is a bug. The reason is that this build step has a duplicated `@rustc_cfg` argument, which contains the kernel configuration, and thus a lot of arguments. The factor 2 happens to be enough to reach the ICE. Thus remove the unneeded `@rustc_cfg`. By doing so, we clean up the command and workaround the ICE. The ICE has been fixed in the upcoming Rust 1.79 [2]. Cc: stable@vger.kernel.org Fixes: a66d733da801 ("rust: support running Rust documentation tests as KUnit ones") Link: https://github.com/rust-lang/rust/issues/122722 [1] Link: https://github.com/rust-lang/rust/pull/122840 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240422091215.526688-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-04-23rust: kernel: require `Send` for `Module` implementationsWedson Almeida Filho
The thread that calls the module initialisation code when a module is loaded is not guaranteed [in fact, it is unlikely] to be the same one that calls the module cleanup code on module unload, therefore, `Module` implementations must be `Send` to account for them moving from one thread to another implicitly. Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Cc: stable@vger.kernel.org # 6.8.x: df70d04d5697: rust: phy: implement `Send` for `Registration` Cc: stable@vger.kernel.org Fixes: 247b365dc8dc ("rust: add `kernel` crate") Link: https://lore.kernel.org/r/20240328195457.225001-3-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-04-23rust: phy: implement `Send` for `Registration`Wedson Almeida Filho
In preparation for requiring `Send` for `Module` implementations in the next patch. Cc: FUJITA Tomonori <fujita.tomonori@gmail.com> Cc: Trevor Gross <tmgross@umich.edu> Cc: netdev@vger.kernel.org Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240328195457.225001-2-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-04-22NFC: trf7970a: disable all regulators on removalPaul Geurts
During module probe, regulator 'vin' and 'vdd-io' are used and enabled, but the vdd-io regulator overwrites the 'vin' regulator pointer. During remove, only the vdd-io is disabled, as the vin regulator pointer is not available anymore. When regulator_put() is called during resource cleanup a kernel warning is given, as the regulator is still enabled. Store the two regulators in separate pointers and disable both the regulators on module remove. Fixes: 49d22c70aaf0 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage") Signed-off-by: Paul Geurts <paul_geurts@live.nl> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22MAINTAINERS: eth: mark IBM eHEA as an OrphanDavid Christensen
Current maintainer Douglas Miller has left IBM and no replacement has been assigned for the driver. The eHEA hardware was last used on IBM POWER7 systems, the last of which reached end-of-support at the end of 2020. Signed-off-by: David Christensen <drc@linux.ibm.com> Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lore.kernel.org/r/20240418195517.528577-1-drc@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22vDPA: code clean for vhost_vdpa uapiZhu Lingshan
This commit cleans up the uapi for vhost_vdpa by better naming some of the enums which report blk information to user space, and they are not in any official releases yet. Fixes: 1ac61ddfee93 ("vDPA: report virtio-blk flush info to user space") Fixes: ae1374b7f72c ("vDPA: report virtio-block read-only info to user space") Fixes: 330b8aea6924 ("vDPA: report virtio-block max segment size to user space") Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Message-Id: <20240415111047.1047774-1-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-04-22Merge tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: "Nothing too crazy in this one, and it looks like (fingers crossed) the recovery and repair issues are settling down - although there's going to be a long tail there, as we've still yet to really ramp up on error injection or syzbot. - fix a few more deadlocks in recovery - fix u32/u64 issues in mi_btree_bitmap - btree key cache shrinker now actually frees, with more instrumentation coming so we can verify that it's working correctly more easily in the future" * tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefs: bcachefs: If we run merges at a lower watermark, they must be nonblocking bcachefs: Fix inode early destruction path bcachefs: Fix deadlock in journal write path bcachefs: Tweak btree key cache shrinker so it actually frees bcachefs: bkey_cached.btree_trans_barrier_seq needs to be a ulong bcachefs: Fix missing call to bch2_fs_allocator_background_exit() bcachefs: Check for journal entries overruning end of sb clean section bcachefs: Fix bio alloc in check_extent_checksum() bcachefs: fix leak in bch2_gc_write_reflink_key bcachefs: KEY_TYPE_error is allowed for reflink bcachefs: Fix bch2_dev_btree_bitmap_marked_sectors() shift bcachefs: make sure to release last journal pin in replay bcachefs: node scan: ignore multiple nodes with same seq if interior bcachefs: Fix format specifier in validate_bset_keys() bcachefs: Fix null ptr deref in twf from BCH_IOCTL_FSCK_OFFLINE
2024-04-22net: dsa: mv88e6xx: fix supported_interfaces setup in ↵Matthias Schiffer
mv88e6250_phylink_get_caps() With the recent PHYLINK changes requiring supported_interfaces to be set, MV88E6250 family switches like the 88E6020 fail to probe - cmode is never initialized on these devices, so mv88e6250_phylink_get_caps() does not set any supported_interfaces flags. Instead of a cmode, on 88E6250 we have a read-only port mode value that encodes similar information. There is no reason to bother mapping port mode to the cmodes of other switch models; instead we introduce a mv88e6250_setup_supported_interfaces() that is called directly from mv88e6250_phylink_get_caps(). Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20240417103737.166651-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22Merge tag 'nfsd-6.9-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix an NFS/RDMA performance regression in v6.9-rc * tag 'nfsd-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: Revert "svcrdma: Add Write chunk WRs to the RPC's Send WR chain"
2024-04-22xdp: use flags field to disambiguate broadcast redirectToke Høiland-Jørgensen
When redirecting a packet using XDP, the bpf_redirect_map() helper will set up the redirect destination information in struct bpf_redirect_info (using the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect() function will read this information after the XDP program returns and pass the frame on to the right redirect destination. When using the BPF_F_BROADCAST flag to do multicast redirect to a whole map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct bpf_redirect_info to point to the destination map to be broadcast. And xdp_do_redirect() reacts to the value of this map pointer to decide whether it's dealing with a broadcast or a single-value redirect. However, if the destination map is being destroyed before xdp_do_redirect() is called, the map pointer will be cleared out (by bpf_clear_redirect_map()) without waiting for any XDP programs to stop running. This causes xdp_do_redirect() to think that the redirect was to a single target, but the target pointer is also NULL (since broadcast redirects don't have a single target), so this causes a crash when a NULL pointer is passed to dev_map_enqueue(). To fix this, change xdp_do_redirect() to react directly to the presence of the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info to disambiguate between a single-target and a broadcast redirect. And only read the 'map' pointer if the broadcast flag is set, aborting if that has been cleared out in the meantime. This prevents the crash, while keeping the atomic (cmpxchg-based) clearing of the map pointer itself, and without adding any more checks in the non-broadcast fast path. Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support") Reported-and-tested-by: syzbot+af9492708df9797198d6@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20240418071840.156411-1-toke@redhat.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-04-22ACPI: CPPC: Fix access width used for PCC registersVanshidhar Konda
commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") modified cpc_read()/cpc_write() to use access_width to read CPC registers. However, for PCC registers the access width field in the ACPI register macro specifies the PCC subspace ID. For non-zero PCC subspace ID it is incorrectly treated as access width. This causes errors when reading from PCC registers in the CPPC driver. For PCC registers, base the size of read/write on the bit width field. The debug message in cpc_read()/cpc_write() is updated to print relevant information for the address space type used to read the register. Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com> Tested-by: Jarred White <jarredwhite@linux.microsoft.com> Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-22ACPI: CPPC: Fix bit_offset shift in MASK_VAL() macroJarred White
Commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") neglected to properly wrap the bit_offset shift when it comes to applying the mask. This may cause incorrect values to be read and may cause the cpufreq module not be loaded. [ 11.059751] cpu_capacity: CPU0 missing/invalid highest performance. [ 11.066005] cpu_capacity: partial information: fallback to 1024 for all CPUs Also, corrected the bitmask generation in GENMASK (extra bit being added). Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Reviewed-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-22Merge tag 'docs-6.9-fixes2' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A set of updates from Thorsten to his (new) guide to verifying bugs and tracking down regressions" * tag 'docs-6.9-fixes2' of git://git.lwn.net/linux: docs: verify/bisect: stable regressions: first stable, then mainline docs: verify/bisect: describe how to use a build host docs: verify/bisect: explain testing reverts, patches and newer code docs: verify/bisect: proper headlines and more spacing docs: verify/bisect: add and fetch stable branches ahead of time docs: verify/bisect: use git switch, tag kernel, and various fixes
2024-04-22x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handlerTom Lendacky
The MWAITX and MONITORX instructions generate the same #VC error code as the MWAIT and MONITOR instructions, respectively. Update the #VC handler opcode checking to also support the MWAITX and MONITORX opcodes. Fixes: e3ef461af35a ("x86/sev: Harden #VC instruction emulation somewhat") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/453d5a7cfb4b9fe818b6fb67f93ae25468bc9e23.1713793161.git.thomas.lendacky@amd.com
2024-04-22cxl/core: Fix potential payload size confusion in cxl_mem_get_poison()Dan Williams
A recent change to cxl_mem_get_records_log() [1] highlighted a subtle nuance of looping calls to cxl_internal_send_cmd(), i.e. that cxl_internal_send_cmd() modifies the 'size_out' member of the @mbox_cmd argument. That mechanism is useful for communicating underflow, but it is unwanted when reusing @mbox_cmd for a subsequent submission. It turns out that cxl_xfer_log() avoids this scenario by always redefining @mbox_cmd each iteration. Update cxl_mem_get_records_log() and cxl_mem_get_poison() to follow the same style as cxl_xfer_log(), i.e. re-define @mbox_cmd each iteration. The cxl_mem_get_records_log() change is just a style fixup, but the cxl_mem_get_poison() change is a potential fix, per Alison [2]: Poison list retrieval can hit this case if the MORE flag is set and a follow on read of the list delivers more records than the previous read. ie. device gives one record, sets the _MORE flag, then gives 5. Not an urgent fix since this behavior has not been seen in the wild, but worth tracking as a fix. Cc: Kwangjin Ko <kwangjin.ko@sk.com> Cc: Alison Schofield <alison.schofield@intel.com> Fixes: ed83f7ca398b ("cxl/mbox: Add GET_POISON_LIST mailbox command") Link: http://lore.kernel.org/r/20240402081404.1106-2-kwangjin.ko@sk.com [1] Link: http://lore.kernel.org/r/ZhAhAL/GOaWFrauw@aschofie-mobl2 [2] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Link: https://lore.kernel.org/r/171235441633.2716581.12330082428680958635.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2024-04-22cifs: reinstate original behavior again for forceuid/forcegidTakayuki Nagata
forceuid/forcegid should be enabled by default when uid=/gid= options are specified, but commit 24e0a1eff9e2 ("cifs: switch to new mount api") changed the behavior. Due to the change, a mounted share does not show intentional uid/gid for files and directories even though uid=/gid= options are specified since forceuid/forcegid are not enabled. This patch reinstates original behavior that overrides uid/gid with specified uid/gid by the options. Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Signed-off-by: Takayuki Nagata <tnagata@redhat.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-04-22 fs/9p: mitigate inode collisionsEric Van Hensbergen
Detect and mitigate inode collsions that now occur since we fixed 9p generating duplicate inode structures. Underlying cause of these appears to be a race condition between reuse of inode numbers in underlying file system and cleanup of inode numbers in the client. Enabling caching makes this much more likely to happen as it increases cleanup latency due to writebacks. Reported-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
2024-04-22arm32, bpf: Reimplement sign-extension mov instructionPuranjay Mohan
The current implementation of the mov instruction with sign extension has the following problems: 1. It clobbers the source register if it is not stacked because it sign extends the source and then moves it to the destination. 2. If the dst_reg is stacked, the current code doesn't write the value back in case of 64-bit mov. 3. There is room for improvement by emitting fewer instructions. The steps for fixing this and the instructions emitted by the JIT are explained below with examples in all combinations: Case A: offset == 32: ===================== Case A.1: src and dst are stacked registers: -------------------------------------------- 1. Load src_lo into tmp_lo 2. Store tmp_lo into dst_lo 3. Sign extend tmp_lo into tmp_hi 4. Store tmp_hi to dst_hi Example: r3 = (s32)r3 r3 is a stacked register ldr r6, [r11, #-16] // Load r3_lo into tmp_lo // str to dst_lo is not emitted because src_lo == dst_lo asr r7, r6, #31 // Sign extend tmp_lo into tmp_hi str r7, [r11, #-12] // Store tmp_hi into r3_hi Case A.2: src is stacked but dst is not: ---------------------------------------- 1. Load src_lo into dst_lo 2. Sign extend dst_lo into dst_hi Example: r6 = (s32)r3 r6 maps to {ARM_R5, ARM_R4} and r3 is stacked ldr r4, [r11, #-16] // Load r3_lo into r6_lo asr r5, r4, #31 // Sign extend r6_lo into r6_hi Case A.3: src is not stacked but dst is stacked: ------------------------------------------------ 1. Store src_lo into dst_lo 2. Sign extend src_lo into tmp_hi 3. Store tmp_hi to dst_hi Example: r3 = (s32)r6 r3 is stacked and r6 maps to {ARM_R5, ARM_R4} str r4, [r11, #-16] // Store r6_lo to r3_lo asr r7, r4, #31 // Sign extend r6_lo into tmp_hi str r7, [r11, #-12] // Store tmp_hi to dest_hi Case A.4: Both src and dst are not stacked: ------------------------------------------- 1. Mov src_lo into dst_lo 2. Sign extend src_lo into dst_hi Example: (bf) r6 = (s32)r6 r6 maps to {ARM_R5, ARM_R4} // Mov not emitted because dst == src asr r5, r4, #31 // Sign extend r6_lo into r6_hi Case B: offset != 32: ===================== Case B.1: src and dst are stacked registers: -------------------------------------------- 1. Load src_lo into tmp_lo 2. Sign extend tmp_lo according to offset. 3. Store tmp_lo into dst_lo 4. Sign extend tmp_lo into tmp_hi 5. Store tmp_hi to dst_hi Example: r9 = (s8)r3 r9 and r3 are both stacked registers ldr r6, [r11, #-16] // Load r3_lo into tmp_lo lsl r6, r6, #24 // Sign extend tmp_lo asr r6, r6, #24 // .. str r6, [r11, #-56] // Store tmp_lo to r9_lo asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi str r7, [r11, #-52] // Store tmp_hi to r9_hi Case B.2: src is stacked but dst is not: ---------------------------------------- 1. Load src_lo into dst_lo 2. Sign extend dst_lo according to offset. 3. Sign extend tmp_lo into dst_hi Example: r6 = (s8)r3 r6 maps to {ARM_R5, ARM_R4} and r3 is stacked ldr r4, [r11, #-16] // Load r3_lo to r6_lo lsl r4, r4, #24 // Sign extend r6_lo asr r4, r4, #24 // .. asr r5, r4, #31 // Sign extend r6_lo into r6_hi Case B.3: src is not stacked but dst is stacked: ------------------------------------------------ 1. Sign extend src_lo into tmp_lo according to offset. 2. Store tmp_lo into dst_lo. 3. Sign extend src_lo into tmp_hi. 4. Store tmp_hi to dst_hi. Example: r3 = (s8)r1 r3 is stacked and r1 maps to {ARM_R3, ARM_R2} lsl r6, r2, #24 // Sign extend r1_lo to tmp_lo asr r6, r6, #24 // .. str r6, [r11, #-16] // Store tmp_lo to r3_lo asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi str r7, [r11, #-12] // Store tmp_hi to r3_hi Case B.4: Both src and dst are not stacked: ------------------------------------------- 1. Sign extend src_lo into dst_lo according to offset. 2. Sign extend dst_lo into dst_hi. Example: r6 = (s8)r1 r6 maps to {ARM_R5, ARM_R4} and r1 maps to {ARM_R3, ARM_R2} lsl r4, r2, #24 // Sign extend r1_lo to r6_lo asr r4, r4, #24 // .. asr r5, r4, #31 // Sign extend r6_lo to r6_hi Fixes: fc832653fa0d ("arm32, bpf: add support for sign-extension mov instruction") Reported-by: syzbot+186522670e6722692d86@syzkaller.appspotmail.com Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Closes: https://lore.kernel.org/all/000000000000e9a8d80615163f2a@google.com Link: https://lore.kernel.org/bpf/20240419182832.27707-1-puranjay@kernel.org
2024-04-22Merge branch 'bnxt_en-aer-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: AER fixes This patchset fixes issues in the AER recovery logic. The first patch refactors the code to make a shutdown function available for AER fatal errors. The second patch fixes the AER fatal recovery logic. The third patch fixes the health register logic to fix AER recovery failure for the new P7 chips. ==================== Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
2024-04-22bnxt_en: Fix error recovery for 5760X (P7) chipsMichael Chan
During error recovery, such as AER fatal error slot reset, we call bnxt_try_map_fw_health_reg() to try to get access to the health register to determine the firmware state. Fix bnxt_try_map_fw_health_reg() to recognize the P7 chip correctly and set up the health register. This fixes this type of AER slot reset failure: bnxt_en 0000:04:00.0: AER: PCIe Bus Error: severity=Uncorrectable (Fatal), type=Inaccessible, (Unregistered Agent ID) bnxt_en 0000:04:00.0 enp4s0f0np0: PCI I/O error detected bnxt_en 0000:04:00.0 bnxt_re0: Handle device suspend call bnxt_en 0000:04:00.1 enp4s0f1np1: PCI I/O error detected bnxt_en 0000:04:00.1 bnxt_re1: Handle device suspend call pcieport 0000:00:02.0: AER: Root Port link has been reset (0) bnxt_en 0000:04:00.0 enp4s0f0np0: PCI Slot Reset bnxt_en 0000:04:00.0: enabling device (0000 -> 0002) bnxt_en 0000:04:00.0: Firmware not ready bnxt_en 0000:04:00.1 enp4s0f1np1: PCI Slot Reset bnxt_en 0000:04:00.1: enabling device (0000 -> 0002) bnxt_en 0000:04:00.1: Firmware not ready pcieport 0000:00:02.0: AER: device recovery failed Fixes: a432a45bdba4 ("bnxt_en: Define basic P7 macros") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22bnxt_en: Fix the PCI-AER routinesVikas Gupta
We do not support two simultaneous recoveries so check for reset flag, BNXT_STATE_IN_FW_RESET, and do not proceed with AER further. When the pci channel state is pci_channel_io_frozen, the PCIe link can not be trusted so we disable the traffic immediately and stop BAR access by calling bnxt_fw_fatal_close(). BAR access after AER fatal error can cause an NMI. Fixes: f75d9a0aa967 ("bnxt_en: Re-write PCI BARs after PCI fatal error.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22bnxt_en: refactor reset close codeVikas Gupta
Introduce bnxt_fw_fatal_close() API which can be used to stop data path and disable device when firmware is in fatal state. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()Xuewen Yan
It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen. Closes: https://lore.kernel.org/all/ZhuYyrh3mweP_Kd8@nz.home/ Closes: https://lore.kernel.org/all/CA+9S74ih+45M_2TPUY_mPPVDhNvyYfy1J1ftSix+KjiTVxg8nw@mail.gmail.com/ Closes: https://lore.kernel.org/lkml/202401301012.2ed95df0-oliver.sang@intel.com/ Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight") Reported-by: Sergei Trofimovich <slyich@gmail.com> Reported-by: Igor Raits <igor@gooddata.com> Reported-by: Breno Leitao <leitao@debian.org> Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Yujie Liu <yujie.liu@intel.com> Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com> Reviewed-and-tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20240422082238.5784-1-xuewen.yan@unisoc.com
2024-04-22sched/eevdf: Fix miscalculation in reweight_entity() when se is not currTianchen Ding
reweight_eevdf() only keeps V unchanged inside itself. When se != cfs_rq->curr, it would be dequeued from rb tree first. So that V is changed and the result is wrong. Pass the original V to reweight_eevdf() to fix this issue. Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight") Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com> [peterz: flip if() condition for clarity] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Abel Wu <wuyun.abel@bytedance.com> Link: https://lkml.kernel.org/r/20240306022133.81008-3-dtcccc@linux.alibaba.com
2024-04-22sched/eevdf: Always update V if se->on_rq when reweightingTianchen Ding
reweight_eevdf() needs the latest V to do accurate calculation for new ve and vd. So update V unconditionally when se is runnable. Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight") Suggested-by: Abel Wu <wuyun.abel@bytedance.com> Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Abel Wu <wuyun.abel@bytedance.com> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Tested-by: Chen Yu <yu.c.chen@intel.com> Link: https://lore.kernel.org/r/20240306022133.81008-2-dtcccc@linux.alibaba.com
2024-04-22bridge/br_netlink.c: no need to return void functionHangbin Liu
br_info_notify is a void function. There is no need to return. Fixes: b6d0425b816e ("bridge: cfm: Netlink Notifications.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22mailmap: add entries for Alex ElderAlex Elder
Define my kernel.org address to be the canonical one, and add mailmap entries for the various addresses (including typos) that have been used over the years. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22icmp: prevent possible NULL dereferences from icmp_build_probe()Eric Dumazet
First problem is a double call to __in_dev_get_rcu(), because the second one could return NULL. if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list) Second problem is a read from dev->ip6_ptr with no NULL check: if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list)) Use the correct RCU API to fix these. v2: add missing include <net/addrconf.h> Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Andreas Roeseler <andreas.a.roeseler@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22net: usb: qmi_wwan: add Telit FN920C04 compositionsDaniele Palmas
Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22pinctrl: renesas: rzg2l: Configure the interrupt type on resumeClaudiu Beznea
Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time") removed the setup of TINT from rzg2l_irqc_irq_enable(). To address the spurious interrupt issue the setup of TINT has been moved in rzg2l_tint_set_edge() through rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are not properly re-configured after a suspend-to-RAM cycle. To address this issue and avoid spurious interrupts while resumming set the interrupt type before enabling it. Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240419063822.3467424-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-22wifi: iwlwifi: mvm: fix link ID managementJohannes Berg
On older (pre-MLD API) devices, we started also calling iwl_mvm_set_link_mapping()/iwl_mvm_unset_link_mapping(), but of course not also iwl_mvm_remove_link(). Since the link ID was only released in iwl_mvm_remove_link() this causes us to run out of FW link IDs very quickly. Fix it by releasing the link ID correctly. Fixes: a8b5d4809b50 ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW") Link: https://msgid.link/20240420154435.dce72db5d5e3.Ic40b454b24f1c7b380a1eedf67455d9cf2f58541@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-22bcachefs: If we run merges at a lower watermark, they must be nonblockingKent Overstreet
Fix another deadlock related to the merge path; previously, we switched to always running merges at a lower watermark (because they are noncritical); but when we run at a lower watermark we also need to run nonblocking or we've introduced a new deadlock. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Reported-and-tested-by: s@m-h.ug
2024-04-22arm64: dts: imx8mp: Fix assigned-clocks for second CSI2Marek Vasut
The first CSI2 pixel clock are supplied from IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT, the second CSI2 pixel clock are supplied from IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT, both clock are supplied from SYS_PLL2 and configured using assigned-clock DT properties. Each CSI2 DT node configures its IMX8MP_CLK_MEDIA_CAMn_PIX_ROOT clock. This used to be the case until likely a copy-paste error in commit f78835d1e616 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF to CLK_24M") which changed the second CSI2 node to configure IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT using its assigned-clocks property. Fix the second CSI2 assigned-clock property back to the original correct IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT . Fixes: f78835d1e616 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF to CLK_24M") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-21Linux 6.9-rc5v6.9-rc5Linus Torvalds
2024-04-21Merge tag 'char-misc-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small char/misc and other driver fixes for 6.9-rc5. Included in here are the following: - binder driver fix for reported problem - speakup crash fix - mei driver fixes for reported problems - comdei driver fix - interconnect driver fixes - rtsx driver fix - peci.h kernel doc fix All of these have been in linux-next for over a week with no reported problems" * tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: peci: linux/peci.h: fix Excess kernel-doc description warning binder: check offset alignment in binder_get_object() comedi: vmk80xx: fix incomplete endpoint checking mei: vsc: Unregister interrupt handler for system suspend Revert "mei: vsc: Call wake_up() in the threaded IRQ handler" misc: rtsx: Fix rts5264 driver status incorrect when card removed mei: me: disable RPL-S on SPS and IGN firmwares speakup: Avoid crash on very long word interconnect: Don't access req_list while it's being manipulated interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
2024-04-21Merge tag 'driver-core-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull kernfs bugfix and documentation update from Greg KH: "Here are two changes for 6.9-rc5 that deal with "driver core" stuff, that do the following: - sysfs reference leak fix - embargoed-hardware-issues.rst update for Power Both of these have been in linux-next for over a week with no reported issues" * tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: embargoed-hardware-issues.rst: Add myself for Power fs: sysfs: Fix reference leak in sysfs_break_active_protection()
2024-04-21Merge tag 'tty-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.9-rc5 that resolve a bunch of reported problems. Included in here are: - MAINTAINERS and .mailmap update for Richard Genoud - serial core regression fixes from 6.9-rc1 changes - pci id cleanups - serial core crash fix - stm32 driver fixes - 8250 driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: stm32: Reset .throttled state in .startup() serial: stm32: Return IRQ_NONE in the ISR if no handling happend serial: core: Fix missing shutdown and startup for serial base port serial: core: Clearing the circular buffer before NULLifying it MAINTAINERS: mailmap: update Richard Genoud's email address serial/pmac_zilog: Remove flawed mitigation for rx irq flood serial: 8250_pci: Remove redundant PCI IDs serial: core: Fix regression when runtime PM is not enabled serial: mxs-auart: add spinlock around changing cts state serial: 8250_dw: Revert: Do not reclock if already at correct rate serial: 8250_lpc18xx: disable clks on error in probe()
2024-04-21Merge tag 'usb-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for 6.9-rc5. Included in here are: - MAINTAINER file update for invalid email address - usb-serial device id updates - typec driver fixes - thunderbolt / usb4 driver fixes - usb core shutdown fixes - cdc-wdm driver revert for reported problem in -rc1 - usb gadget driver fixes - xhci driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: serial: option: add Telit FN920C04 rmnet compositions usb: dwc3: ep0: Don't reset resource alloc flag Revert "usb: cdc-wdm: close race between read and workqueue" USB: serial: option: add Rolling RW101-GL and RW135-GL support USB: serial: option: add Lonsung U8300/U9300 product USB: serial: option: add support for Fibocom FM650/FG650 USB: serial: option: support Quectel EM060K sub-models USB: serial: option: add Fibocom FM135-GL variants usb: misc: onboard_usb_hub: Disable the USB hub clock on failure thunderbolt: Avoid notify PM core about runtime PM resume thunderbolt: Fix wake configurations after device unplug usb: dwc2: host: Fix dereference issue in DDMA completion flow. usb: typec: mux: it5205: Fix ChipID value typo MAINTAINERS: Drop Li Yang as their email address stopped working usb: gadget: fsl: Initialize udc before using it usb: Disable USB3 LPM at shutdown usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error usb: typec: tcpm: Correct the PDO counting in pd_set usb: gadget: functionfs: Wait for fences before enqueueing DMABUF usb: gadget: functionfs: Fix inverted DMA fence direction ...
2024-04-21Merge tag 'sched_urgent_for_v6.9_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Add a missing memory barrier in the concurrency ID mm switching * tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Add missing memory barrier in switch_mm_cid
2024-04-21Merge tag 'x86_urgent_for_v6.9_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ - Print the correct error code when FRED reports a bad event type - Add a FRED-specific INT80 handler without the special dances that need to happen in the current one - Enable the using-the-default-return-thunk-but-you-should-not warning only on configs which actually enable those special return thunks - Check the proper feature flags when selecting BHI retpoline mitigation * tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ x86/fred: Fix incorrect error code printout in fred_bad_type() x86/fred: Fix INT80 emulation for FRED x86/retpolines: Enable the default thunk warning only on relevant configs x86/bugs: Fix BHI retpoline check
2024-04-21ARM: dts: microchip: at91-sama7g54_curiosity: Replace ↵Andrei Simion
regulator-suspend-voltage with the valid property By checking the pmic node with microchip,mcp16502.yaml# 'regulator-suspend-voltage' does not match any of the regexes 'pinctrl-[0-9]+' from schema microchip,mcp16502.yaml# which inherits regulator.yaml#. So replace regulator-suspend-voltage with regulator-suspend-microvolt to avoid the inconsitency. Fixes: ebd6591f8ddb ("ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board") Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20240404123824.19182-3-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-04-21ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with ↵Andrei Simion
the valid property By checking the pmic node with microchip,mcp16502.yaml# 'regulator-suspend-voltage' does not match any of the regexes 'pinctrl-[0-9]+' from schema microchip,mcp16502.yaml# which inherits regulator.yaml#. So replace regulator-suspend-voltage with regulator-suspend-microvolt to avoid the inconsitency. Fixes: 85b1304b9daa ("ARM: dts: at91: sama7g5ek: set regulator voltages for standby state") Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20240404123824.19182-2-andrei.simion@microchip.com [claudiu.beznea: added a dot before starting the last sentence in commit description] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-04-20bcachefs: Fix inode early destruction pathKent Overstreet
discard_new_inode() is the wrong interface to use when we need to free an inode that was never inserted into the inode hash table; we can bypass the whole iput() -> evict() path and replace it with __destroy_inode(); kmem_cache_free() - this fixes a WARN_ON() about I_NEW. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-20bcachefs: Fix deadlock in journal write pathKent Overstreet
bch2_journal_write() was incorrectly waiting on earlier journal writes synchronously; this usually worked because most of the time we'd be running in the context of a thread that did a journal_buf_put(), but sometimes we'd be running out of the same workqueue that completes those prior journal writes. Additionally, this makes sure to punt to a workqueue before submitting preflushes - we really don't want to be calling submit_bio() in the main transaction commit path. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-20bcachefs: Tweak btree key cache shrinker so it actually freesKent Overstreet
Freeing key cache items is a multi stage process; we need to wait for an SRCU grace period to elapse, and we handle this ourselves - partially to avoid callback overhead, but primarily so that when allocating we can first allocate from the freed items waiting for an SRCU grace period. Previously, the shrinker was counting the items on the 'waiting for SRCU grace period' lists as items being scanned, but this meant that too many items waiting for an SRCU grace period could prevent it from doing any work at all. After this, we're seeing that items skipped due to the accessed bit are the main cause of the shrinker not making any progress, and we actually want the key cache shrinker to run quite aggressively because reclaimed items will still generally be found (more compactly) in the btree node cache - so we also tweak the shrinker to not count those against nr_to_scan. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-20bcachefs: bkey_cached.btree_trans_barrier_seq needs to be a ulongKent Overstreet
this stores the SRCU sequence number, which we use to check if an SRCU barrier has elapsed; this is a partial fix for the key cache shrinker not actually freeing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-20Merge tag 'block-6.9-20240420' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "Just two minor fixes that should go into the 6.9 kernel release, one fixing a regression with partition scanning errors, and one fixing a WARN_ON() that can get triggered if we race with a timer" * tag 'block-6.9-20240420' of git://git.kernel.dk/linux: blk-iocost: do not WARN if iocg was already offlined block: propagate partition scanning errors to the BLKRRPART ioctl
2024-04-20Merge tag 'email' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull email address update from James Bottomley: "My IBM email has stopped working, so update to a working email address" * tag 'email' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: update to working email address
generated by cgit (git 2.34.1) at 2025-09-12 00:52:49 +0000