| Age | Commit message (Collapse) | Author |
|---|
|
In the discard worker, we were failing to validate the bucket state -
meaning a corrupt needs_discard btree could cause us to discard a bucket
that we shouldn't.
If check_alloc_info hasn't run yet we just want to bail out, otherwise
it's a filesystem inconsistent error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Small changes with 3 cppcheck fixes and the firmware version now
visible with debugfs instead of only via dmesg logs.
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset contains important updates for SoundWire support.
We initially implemented support for multiple amplifiers on different
links using a single HDaudio DMA transfer. To align with the other OS,
the 'aggregation' is now supported by the firmware. This change in
directions has kernel impacts, since we now have multiple HDaudio DMAs
to program and start, but since there are no platforms released so far
there's no end-user impact.
In addition, the behavior in case of xruns is improved by clearing the
PCM states and better handling of the hw_free case.
Note that the hw_free support will compile but will only be functional
with the companion patch "soundwire: intel: add intel_free_stream() back"
already applied in the SoundWire tree.
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
The first two patches change snd_soc_card_get_kcontrol() to use the
core snd_ctl_find_id_mixer() functionality instead of open-coding its
own list walk.
The last patch adds a KUnit test for this, which was tested on the
original and modified code.
|
|
Print out the mode as a string, and also print out the btree and
watermark.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Merge series from Zhang Yi <zhangyi@everest-semi.com>:
We solved some issues related to headphone detection.And for using
the same configuration in different power conditions,we modified the
clock table
|
|
Pull documentation fixes from Jonathan Corbet:
"Four small documentation fixes"
* tag 'docs-6.9-fixes' of git://git.lwn.net/linux:
docs: zswap: fix shell command format
tracing: Fix documentation on tp_printk cmdline option
docs: Fix bitfield handling in kernel-doc
Documentation: dev-tools: Add link to RV docs
|
|
Some laptops where the thermal control is handled by the EC may
provide trip points that fail the kernels new validation, but still have
working temperature sensors. An example of this is the Framework 13 AMD.
This patch allows the thermal zone to still be registered without trip
points if the trip points fail validation, allowing the temperature
sensor to be viewed and used by the user.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218586
Fixes: 9c8647224e9f ("ACPI: thermal: Use library functions to obtain trip point temperature values")
Signed-off-by: Stephen Horvath <s.horvath@outlook.com.au>
[ rjw: Subject edits, remove redundant braces ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Convert the fsl-asoc-card binding to YAML.
When testing dtbs_check, found below compatible strings
are not listed in document:
fsl,imx-sgtl5000
fsl,imx53-cpuvo-sgtl5000
fsl,imx51-babbage-sgtl5000
fsl,imx53-m53evk-sgtl5000
fsl,imx53-qsb-sgtl5000
fsl,imx53-voipac-sgtl5000
fsl,imx6-armadeus-sgtl5000
fsl,imx6-rex-sgtl5000
fsl,imx6-sabreauto-cs42888
fsl,imx6-wandboard-sgtl5000
fsl,imx6dl-nit6xlite-sgtl5000
fsl,imx6q-ba16-sgtl5000
fsl,imx6q-nitrogen6_max-sgtl5000
fsl,imx6q-nitrogen6_som2-sgtl5000
fsl,imx6q-nitrogen6x-sgtl5000
fsl,imx6q-sabrelite-sgtl5000
fsl,imx6q-sabresd-wm8962
fsl,imx6q-udoo-ac97
fsl,imx6q-ventana-sgtl5000
fsl,imx6sl-evk-wm8962
fsl,imx6sx-sdb-mqs
fsl,imx6sx-sdb-wm8962
fsl,imx7d-evk-wm8960
karo,tx53-audio-sgtl5000
tq,imx53-mba53-sgtl5000
So add them in yaml file to pass the test.
Also correct the 'dai-format' to 'format' in document.
For 'audio-routing', the items are not listed. Because
this fsl-asoc-card is generic driver, which supports several
codecs, if list all the items, there will be a long list.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/1711976056-19884-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of fixes for situations with extreme filesystem damage.
One fix ("Fix journal pins in btree write buffer") applicable to
normal usage; also a dio performance fix.
New repair/construction code is in the final stages, should be ready
in about a week. Anyone that lost btree interior nodes (or a variety
of other damage) as a result of the splitbrain bug will be able to
repair then"
* tag 'bcachefs-2024-04-01' of https://evilpiepirate.org/git/bcachefs: (32 commits)
bcachefs: On emergency shutdown, print out current journal sequence number
bcachefs: Fix overlapping extent repair
bcachefs: Fix remove_dirent()
bcachefs: Logged op errors should be ignored
bcachefs: Improve -o norecovery; opts.recovery_pass_limit
bcachefs: bch2_run_explicit_recovery_pass_persistent()
bcachefs: Ensure bch_sb_field_ext always exists
bcachefs: Flush journal immediately after replay if we did early repair
bcachefs: Resume logged ops after fsck
bcachefs: Add error messages to logged ops fns
bcachefs: Split out recovery_passes.c
bcachefs: fix backpointer for missing alloc key msg
bcachefs: Fix bch2_btree_increase_depth()
bcachefs: Kill bch2_bkey_ptr_data_type()
bcachefs: Fix use after free in check_root_trans()
bcachefs: Fix repair path for missing indirect extents
bcachefs: Fix use after free in bch2_check_fix_ptrs()
bcachefs: Fix btree node keys accounting in topology repair path
bcachefs: Check btree ptr min_key in .invalid
bcachefs: add REQ_SYNC and REQ_IDLE in write dio
...
|
|
mean_and_variance_test_2 and mean_and_variance_test_4 always fail.
The input parameters to those tests are identical to the input parameters
to tests 1 and 3, yet the expected result for tests 2 and 4 is different
for the mean and stddev tests. That will always fail.
Expected mean_and_variance_get_mean(mv) == mean[i], but
mean_and_variance_get_mean(mv) == 22 (0x16)
mean[i] == 10 (0xa)
Drop the bad tests.
Fixes: 65bc41090720 ("mean and variance: More tests")
Closes: https://lore.kernel.org/lkml/065b94eb-6a24-4248-b7d7-d3212efb4787@roeck-us.net/
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
HEAD
KVM/riscv fixes for 6.9, take #1
- Fix spelling mistake in arch_timer selftest
- Remove redundant semicolon in num_isa_ext_regs()
- Fix APLIC setipnum_le/be write emulation
- Fix APLIC in_clrip[x] read emulation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.9, part #1
- Ensure perf events programmed to count during guest execution
are actually enabled before entering the guest in the nVHE
configuration.
- Restore out-of-range handler for stage-2 translation faults.
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches.
- Fix early handling of architectural VHE-only systems to ensure E2H is
appropriately set.
- Correct a format specifier warning in the arch_timer selftest.
- Make the KVM banner message correctly handle all of the possible
configurations.
|
|
The node_id for multi-gateway ALH DAI's get overwritten with the
group_id during the DAI copier's ipc_prepare op. So, save the ALH
dai_index during the BE DAI hw_params in the dai_index field of struct
ipc4_copier and use that to set the device ID in the configuration blob.
This will avoid errors during copier init after an xrun.
Note that the dai_index is typically set in topology for DMIC/SSP, but
it's not used for ALH. Reclaiming this dai_index field to store the
node_id does not generate a conflict with topology-defined values.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the delayed stops, the xrun handling is problematic: the
applications expects everything to be reset but the firmware and DMA
are still in a PAUSED state.
This patch makes sure the prepare while pending_stop is set is
special-cased.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a state variable to keep track of delayed stops, in case
pcm_ops->platform_stop_during_hw_free is set.
This patch should be iso-functionality, possibly removing no-op
cases. The main purpose of this new state variable is to prepare a
follow-up patch to reset all PCM and DMAs in case of stop/prepare xrun
sequences.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The same sequence is used twice, use common helper.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For some reason the existing code stops on the first error, which
potentially leaves the DMA and widgets in a weird state.
Change to free-up all resources even in case of errors.
Also add a more consistent error handling and logs, with the first
error code returned to the caller.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When an xrun happens, the BE DAI hw_params doesn't get invoked before
the stream restarts with a prepare. In this case, clearing the node ID
when the DAI widget is freed and unprepared will result in an error when
it is re-initialized. In order to avoid this, move the code to clear the
node ID to the BE DAI hw_free op to keep it balanced with the BE DAI
hw_params.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To allow using widget_to_sdev() in other files, move it as static inline
in shared header file.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The node_id value needs to be handled specifically for ALH.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add intel_alh_id to set the expected gateway node_id in a follow-up
patch.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We've already defined the value for dai_index, let's use it instead of
open-coding the same thing. No functionality change.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need to be able to set the dai config differently for SoundWire.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_ipc4_dma_config_tlv{} is required for ACE2.x. The patch follow the
convention to set the dma_stream_channel_map.mapping device as
"link_id << 8 | pdi_id".
And the mapping in sof_ipc4_alh_configuration_blob{} should be the same
as dma_stream_channel_map.mapping in sof_ipc4_dma_config{}.
The purposes of device id is to map DMA tlv.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We always use the lowest N channels of stream. So, set ch_mask to
GENMASK(params_channels(params) - 1, 0).
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Each stream needs a dma_config_tlv. We will handle multi dma_config_tlv
in the follow up commits.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
first CPU DAI"
This reverts commit f8ba62ac863c33fc0d8ac3f1270985c2b77f4377.
The SoundWire aggregated solution was to use one DMA on multiple links.
But, the solution changed to use one DMA for each link. It means that
we should assign HDaudio stream_tag for each cpu_dai.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit 699e146d9ebf42ee2a5d4e4e28f7a49c4aef0105.
Don't reset device_count as we will use the multi-gateway firmware
configuration.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The existing code derives the channel map used to program the HDaudio
link DMA from the hw_params, but that is not quite right in the case
of aggregation. The code in soc-pcm.c splits the hw_params depending
on the codec_ch_map, and we need to reconstruct the channel-map to
insert the data in the right places.
This issue is seen only on amplifier feedback capture where the data
from the second amplifier was replaced by that of the first amplifier.
Note that the loop iterator of the macro for_each_rtd_cpu_dais() is
reused in a following loop. This is different to all existing usages
of that macro, hence the use of a boolean flag to avoid an access to
an uninitialized variable.
Fixes: 2960ee5c4814 ("ASoC: SOF: Intel: hda-dai: add helpers for SoundWire callbacks")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cppcheck reports this:
sound/soc/sof/ipc4-topology.c:569:23: style: Local variable 'sdev'
shadows outer variable [shadowVariable]
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
^
sound/soc/sof/ipc4-topology.c:512:22: note: Shadowed declaration
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
^
sound/soc/sof/ipc4-topology.c:569:23: note: Shadow variable
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
^
Remove shadowed variable.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240402145959.172619-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Somehow instance_id and id were mixed. Align on instance_id for
consistency.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240402145959.172619-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cppcheck reports this issue:
sound/soc/sof/amd/acp-loader.c:299:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = request_firmware(&adata->fw_dbin, fw_filename, sdev->dev);
^
sound/soc/sof/amd/acp-loader.c:289:6: note: ret is assigned
ret = snd_sof_dsp_block_write(sdev, SOF_FW_BLK_TYPE_IRAM, 0,
^
sound/soc/sof/amd/acp-loader.c:299:6: note: ret is overwritten
ret = request_firmware(&adata->fw_dbin, fw_filename, sdev->dev);
^
This behavior is probably unintentional, there's no reason to return
an error for the DRAM but not the IRAM.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240402145959.172619-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To check loaded FW version:
$ hexdump -C /sys/kernel/debug/sof/fw_version
00000000 02 00 07 00 63 00 01 00 00 00 00 00 00 00 00 00 |....c...........|
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402145959.172619-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
nvme_update_zone_info does (admin queue) I/O to the device and can fail.
We fail to abort the queue limits update if that happen, but really
should avoid with the frozen I/O queue as much as possible anyway.
Split the logic into a helper to query the information that can be
called on an unfrozen queue and one to apply it to the queue limits.
Fixes: 9b130d681443 ("nvme: use the atomic queue limits update API")
Reported-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Serialise cifs_construct_tcon() with cifs_mount_mutex to handle
parallel mounts that may end up reusing the session and tcon created
by it.
Cc: stable@vger.kernel.org # 6.4+
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The tcons created by cifs_construct_tcon() on multiuser mounts must
also be able to failover and refresh DFS referrals, so set the
appropriate fields in order to get a full DFS tcon. They could be
shared among different superblocks later, too.
Cc: stable@vger.kernel.org # 6.4+
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404021518.3Xu2VU4s-lkp@intel.com/
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Avoid refreshing DFS referral with refpath_lock acquired as the I/O
could block for a while due to a potentially disconnected or slow DFS
root server and then making other threads - that use same @server and
don't require a DFS root server - unable to make any progress.
Cc: stable@vger.kernel.org # 6.4+
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Avoid potential use-after-free bugs when walking DFS referrals,
mounting and performing DFS failover by ensuring that all children
from parent @tcon->ses are also refcounted. They're all needed across
the entire DFS mount. Get rid of @tcon->dfs_ses_list while we're at
it, too.
Cc: stable@vger.kernel.org # 6.4+
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404021527.ZlRkIxgv-lkp@intel.com/
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Linux 6.9 made the nvme multipath nodes not properly pick up changes when
the LBA size goes smaller after an nvme format. This is because we now
try to inherit the queue settings for the multipath node entirely from
the individual paths. That is the right thing to do for I/O size
limitations, which make up most of the queue limits, but it is wrong for
changes to the namespace configuration, where we do want to pick up the
new format, which will eventually show up on all paths once they are
re-queried.
Fix this by not inheriting the block size and related fields and always
for updating them.
Fixes: 8f03cfa117e0 ("nvme: don't use nvme_update_disk_info for the multipath disk")
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch is modified nau8325_dac_oversampl_enum enumerated.
Use SOC_VALUE_ENUM instead to hide empty (presumably invalid) options.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://msgid.link/r/20240401104753.3432507-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
R-Car Gen1 and Gen4 doesn't have SCU, and current driver checks Gen1
(only) on each devices (A). But these drivers are assuming it might be
not enabled after that (B).
/* This driver doesn't support Gen1 at this point */
(A) if (rsnd_is_gen1(priv))
return 0;
(B) node = rsnd_src_of_node(priv);
if (!node)
return 0; /* not used is not error */
Gen4 DT doesn't have these device settings. (A) check doesn't work for
it, but (B) check handling it.
Gen1 DT doesn't have these device settings either, and (A) is handling
it, but (B) only is very enough. (A) is no longer needed.
This patch removes (A)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87v850a4dl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Renesas Sound driver is using rsnd_is_genX() macro to handling
difference. We can use "grep rsnd_is_gen" to find-out difference for
each SoC today.
In general, driver uses flag to handling SoC difference. But in Renesas
Sound case, the differences are very specific, if you try to make it
general, the code will become be very complicated.
Some of them can use flag to handling, but we can find-out all diffence
by using "grep rsnd_is_gen" today. It is not so good, but not so bad so
far. So we will keep current style for a while.
This patch cares Gen1/Gen2 exception by using negative handling to makes no
more update for this part when we support Gen5 or later.
- if (rsnd_is_gen3() || rsnd_is_gen4() || rsnd_is_gen5() || ...)
+ if (!rsnd_is_gen1() && !rsnd_is_gen2())
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87wmpga4ds.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Renesas Sound driver is using rsnd_is_genX() macro to handling
difference. We can use "grep rsnd_is_gen" to find-out difference for
each SoC except rsnd_is_e3(). Let's put same rule for E3 as well.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87y19wa4dy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All SoC has reg-name, no need to support getting resource from ID
any more. Remove it. To get physical address for DMA settings,
it still need to know the index, but it is no longer fixed.
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87zfuca4e6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
R-Car Sound is using almost same register mapping on each generation,
therefore we can share it. Here indicates some memo/comments.
SSI/SSIU/SCU have multi channels (SSI0 - SSI9 etc), but ADG is single,
so, we don't need to have multi channel settings for it
- rsnd_gen_regmap_init(..., 10, ..ADG, ...);
+ rsnd_gen_regmap_init(..., 1, ..ADG, ...);
Gen4 added new SSI_BUSIF, but it is not used
Gen4 calls rsnd_gen_regmap_init() for SDMC, but the address is calculated
by rsnd_gen4_dma_addr(). It needs physical address, but other info are
not needed. use NULL conf for it.
- rsnd_gen_regmap_init(..., 10, ..SDMC, conf_sdmc);
+ rsnd_gen_regmap_init(..., 1, ..SDMC, conf_null);
Gen4 have only SSI0/SSIU0, we don't need to have multi channel settings.
- rsnd_gen_regmap_init(..., 10, ..SSI, ...);
+ rsnd_gen_regmap_init(..., 1, ..SSI, ...);
SSI_MODE2 address is different between Gen2/3 and Gen4, but it is not
used on Gen4. Thus we can share same regmap table.
Gen2/3 : 0x808
Gen4 : 0xa0c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Khanh Le <khanh.le.xr@renesas.com>
Link: https://msgid.link/r/871q7obiyt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new snd-soc-card KUnit test with a simple test case for
snd_soc_card_get_kcontrol() and snd_soc_card_get_kcontrol_locked().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240401100210.61277-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the snd_ctl_find_id_mixer[_locked]() wrapper in
snd_soc_card_get_kcontrol[_locked]() instead of open-coding a custom
list walk of the card controls list.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240401100210.61277-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds wrapper function snd_ctl_find_id_mixer_locked(). This is
identical to snd_ctl_find_id_mixer() except that it can be called
from code that is already holding controls_rwsem.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240401100210.61277-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Modpost warns about missing module description, add it.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/20240402130640.3310999-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
