| Age | Commit message (Collapse) | Author |
|---|
|
Like commit f1f047bd7ce0 ("smb: client: Fix -Wstringop-overflow issues"),
adjust the memcpy() destination address to be based off the surrounding
object rather than based off the 4-byte "Protocol" member. This avoids a
build-time warning when compiling under CONFIG_FORTIFY_SOURCE with GCC 15:
In function 'fortify_memcpy_chk',
inlined from 'CIFSSMBSetPathInfo' at ../fs/smb/client/cifssmb.c:5358:2:
../include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
571 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
CIFSSMBCopy() is unused, remove it.
It seems to have been that way pre-git; looking in a historic
archive, I think it landed around May 2004 in Linus'
BKrev: 40ab7591J_OgkpHW-qhzZukvAUAw9g
and was unused back then.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix a NULL pointer deref (Everest K.C.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZzcsMT_FEqBE0cAW@fedora
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.13-2024-11-15:
amdgpu:
- Parition fixes
- GFX 12 fixes
- SR-IOV fixes
- MES fixes
- RAS fixes
- GC queue handling fixes
- VCN fixes
- Add sysfs reset masks
- Better error messages for P2P failurs
- SMU fixes
- Documentation updates
- GFX11 enforce isolation updates
- Display HPD fixes
- PSR fixes
- Panel replay fixes
- DP MST fixes
- USB4 fixes
- Misc display fixes and cleanups
- VRAM handling fix for APUs
- NBIO fix
amdkfd:
- INIT_WORK fix
- Refcount fix
- KFD MES scheduling fixes
drm/fourcc:
- Add missing tiling mode
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241115165012.573465-1-alexander.deucher@amd.com
|
|
Commit 723e8462a4fe ("pinctrl: qcom: spmi-gpio: Fix the GPIO strength
mapping") fixed a long-standing issue in the Qualcomm SPMI PMIC gpio
driver which had the 'low' and 'high' drive strength settings switched
but failed to update the debugfs interface which still gets this wrong.
Fix the debugfs code so that the exported values match the hardware
settings.
Note that this probably means that most devicetrees that try to describe
the firmware settings got this wrong if the settings were derived from
debugfs. Before the above mentioned commit the settings would have
actually matched the firmware settings even if they were described
incorrectly, but now they are inverted.
Fixes: 723e8462a4fe ("pinctrl: qcom: spmi-gpio: Fix the GPIO strength mapping")
Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver")
Cc: Anjelique Melendez <quic_amelende@quicinc.com>
Cc: stable@vger.kernel.org # 3.19
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/20241025121622.1496-1-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure a kdump kernel with CONFIG_IMA_KEXEC enabled and booted on
an AMD SME enabled hardware properly decrypts the ima_kexec buffer
information passed to it from the previous kernel
- Fix building the kernel with Clang where a non-TLS definition of the
stack protector guard cookie leads to bogus code generation
- Clear a wrongly advertised virtualized VMLOAD/VMSAVE feature flag on
some Zen4 client systems as those insns are not supported on client
* tag 'x86_urgent_for_v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix a kdump kernel failure on SME system when CONFIG_IMA_KEXEC=y
x86/stackprotector: Work around strict Clang TLS symbol requirements
x86/CPU/AMD: Clear virtualized VMLOAD/VMSAVE on Zen4 client
|
|
io_create_region() jumps after a vmap failure without setting the return
code, it could be 0 or just uninitialised.
Fixes: dfbbfbf191878 ("io_uring: introduce concept of memory regions")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0abac19dbf81c061cffaa9534a2471ed5460ad3e.1731803848.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Provide information how to reference I2C busses created by the PIIX4
chip driver from the ACPI code.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add support for the I2C controller on the RTL9300 SoC. There are two I2C
controllers in the RTL9300 that are part of the Ethernet switch register
block. Each of these controllers owns a SCL pin (GPIO8 for the fiorst
I2C controller, GPIO17 for the second). There are 8 possible SDA pins
(GPIO9-16) that can be assigned to either I2C controller. This
relationship is represented in the device tree with a child node for
each SDA line in use.
This is based on the openwrt implementation[1] but has been
significantly modified
[1] - https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The removal of the supply clock rate check implies a need to remove
some unnecessary left-over data from the driver as well.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add dt-schema for the I2C controller on the RTL9300 Ethernet switch
with integrated SoC.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
While at it, fix an obvious typo in help section of the Kconfig.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Some S32G2/S32G3 SoC I2C particularities exist
such as different <clock divider, register value> pairs.
Those are addressed by adding specific S32G2 and S32G3
compatible strings.
Co-developed-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Signed-off-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
S32G2 and S32G3 SoCs use the same I2C controller as i.MX.
But there are small differences such as specific
<clock divider, register value> pairs.
So add new compatible strings 'nxp,s32g2-i2c'and 'nxp,s32g3-i2c'
for S32G2/S32G3 Socs.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Variable cci_clk_rate is not effectively used, so delete it.
drivers/i2c/busses/i2c-qcom-cci.c:526:16: warning: variable ‘cci_clk_rate’ set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11532
Fixes: 8284750a1829 ("i2c: qcom-cci: Stop complaining about DT set clock rate")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The i2c-amd756-s4882 and i2c-nforce2-s4985 muxing pseudo-drivers were
written at a time when the i2c core did not support muxing. They are
essentially board-specific hacks. If we had to add support for these
boards today, we would implement it in a completely different way.
These Tyan server boards are 19 years old by now, so I very much doubt
any of these is still running today. So let's just drop this clumsy
code. If anyone really still needs this support and complains, I'll
rewrite it in a proper way on top of i2c-mux.
This also fixes the following warnings:
drivers/i2c/busses/i2c-amd756.c:286:20: warning: symbol 'amd756_smbus' was not declared. Should it be static?
drivers/i2c/busses/i2c-nforce2.c:123:20: warning: symbol 'nforce2_smbus' was not declared. Should it be static?
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Andi Shyti <andi.shyti@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
We are experiencing a problem with the i.MX I2C controller when
communicating with SMBus devices. We are seeing devices time-out because
the time between sending/receiving two bytes is too long, and the SMBus
device returns to the idle state. This happens because the i.MX I2C
controller sends and receives byte by byte. When a byte is sent or
received, we get an interrupt and can send or receive the next byte.
The current implementation sends a byte and then waits for an event
generated by the interrupt subroutine. After the event is received, the
next byte is sent and we wait again. This waiting allows the scheduler
to reschedule other tasks, with the disadvantage that we may not send
the next byte for a long time because the send task is not immediately
scheduled. For example, if the rescheduling takes more than 25ms, this
can cause SMBus devices to timeout and communication to fail.
This patch changes the behavior so that we do not reschedule the
send/receive task, but instead send or receive the next byte in the
interrupt subroutine. This prevents rescheduling and drastically reduces
the time between sending/receiving bytes. The cost in the interrupt
subroutine is relatively small, we check what state we are in and then
send/receive the next byte. Before we had to call wake_up, which is even
less expensive. However, we also had to do some scheduling, which
increased the overall cost compared to the new solution. The wake_up
function to wake up the send/receive task is now only called when an
error occurs or when the transfer is complete.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Separate the atomic, dma and non-dma use case as a preparation step for
moving the non-dma use case to the isr to avoid rescheduling while a
transfer is in progress.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
According to the i.MX8M Mini reference manual chapter "16.1.4.2
Generation of Start" it is only necessary to poll for bus busy and
arbitration lost in multi master mode. This helps to avoid rescheduling
while the i2c bus is busy and avoids SMBus devices to timeout. For
backward compatibility, the single-master property needs to be
explicitly set to disable the bus busy polling.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Define a new ACPI HID for HJMC01
Signed-off-by: Hunter Yu <hunter.yu@hj-micro.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The to-be-fixed commit rightfully reduced a race window, but also
removed a comment which is still helpful after the fix. Bring the
comment back.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
PIC64GX i2c is compatible with the microchip corei2c, just add fallback
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
We never modify abort_sources, mark it as const.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/i2c to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
In existing socs, I2C serial engine is sourced from XO (19.2MHz).
Where as in IPQ5424, I2C serial engine is sourced from GPLL0 (32MHz).
The existing map table is based on 19.2MHz. This patch incorporates
the clock map table to derive the SCL clock from the 32MHz source
clock frequency.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
It is common practice in the downstream and upstream CCI dt to set CCI
clock rates to 19.2 MHz. It appears to be fairly common for initial code to
set the CCI clock rate to 37.5 MHz.
Applying the widely used CCI clock rates from downstream ought not to cause
warning messages in the upstream kernel where our general policy is to
usually copy downstream hardware clock rates across the range of Qualcomm
drivers.
Drop the warning it is pervasive across CAMSS users but doesn't add any
information or warrant any changes to the DT to align the DT clock rate to
the bootloader clock rate.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/linux-arm-msm/20240824115900.40702-1-bryan.odonoghue@linaro.org
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The CCI on the Snapdragon 670 is the interface for controlling camera
hardware over I2C. Add the compatible so it can be added to the SDM670
device tree.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
If not clearing the BB (bus busy) condition in the BER (bus error)
interrupt, the driver causes a timeout and hence the i2c core
doesn't do the i2c transfer retry but returns the driver's return
value to the upper layer instead.
Clear the BB condition in the BER interrupt and a software flag is
used. The driver does an i2c recovery without causing the timeout
if the flag is set.
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Originally the driver uses the XMIT bit in SMBnST register to decide
the upcoming i2c transaction. If XMIT bit is 1, then it will be an i2c
write operation. If it's 0, then a read operation will be executed.
In slave mode the XMIT bit can simply be used directly to set the state.
XMIT bit can be used as an indication to the current state of the state
machine during slave operation. (meaning XMIT = 1 during writing and
XMIT = 0 during reading).
In master operation XMIT is valid only if there are no bus errors.
For example: in a multi master where the same module is switching from
master to slave at runtime, and there are collisions, the XMIT bit
cannot be trusted.
However the maser already "knows" what the bus state is, so this bit
is not needed and the driver can just track what it is currently doing.
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The len variable is not initialized, which may cause the for loop to
behave unexpectedly.
Fixes: 9b25419ad397 ("i2c: amd-asf: Add routine to handle the ASF slave process")
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
|
|
Mark Maddy as a co-maintainer, so that he can get a kernel.org account
and help manage the powerpc tree on kernel.org.
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241115045442.675721-1-mpe@ellerman.id.au
|
|
When in fatal error condition, mark device as detached first
and then complete all pending HWRM commands as firmware is not
going to process them and eventually time out. Move the device
to error only if suspend is called when device is in Fatal state.
Also, remove some outdated comments. Remove the stop_irq call
which is no longer required.
Fixes: cc5b9b48d447 ("RDMA/bnxt_re: Recover the device when FW error is detected")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1731660464-27838-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Instead of driver setting the congestion mode, use
the default values setup by Firmware. Enable the tos_ecn
field in FW.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1731660464-27838-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Adding support for different traffic class passed
to driver. Fix the traffic class setting in modify_qp
by skipping the ECN bits. Pass the service level received
from applications to the firmware.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1731660464-27838-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
A DREQ is sent in 2 situations:
1. When requested by the user.
This DREQ has to wait for a DREP, which will be routed to the user.
2. When the cm_id is destroyed.
This DREQ is generated by the CM to notify the peer that the
connection has been destroyed.
In the latter case, any DREP that is received will be discarded.
There's no need to hold a reference on the cm_id. Today, both
situations are covered by the same function: cm_send_dreq_locked().
When invoked in the cm_id destroy path, the cm_id reference would be
held until the DREQ completes, blocking the destruction. Because it
could take several seconds to minutes before the DREQ receives a DREP,
the destroy call posts a send for the DREQ then immediately cancels the
MAD. However, cancellation is not immediate in the MAD layer. There
could still be a delay before the MAD layer returns the DREQ to the CM.
Moreover, the only guarantee is that the DREQ will be sent at most once.
Introduce a separate flow for sending a DREQ when destroying the cm_id.
The new flow will not hold a reference on the cm_id, allowing it to be
cleaned up immediately. The cancellation trick is no longer needed.
The MAD layer will send the DREQ exactly once.
Signed-off-by: Sean Hefty <shefty@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/a288a098b8e0550305755fd4a7937431699317f4.1731495873.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Typically, when the CM sends a MAD it bumps a reference count
on the associated cm_id. There are some exceptions, such
as when the MAD is a direct response to a receive MAD. For
example, the CM may generate an MRA in response to a duplicate
REQ. But, in general, if a MAD may be sent as a result of
the user invoking an API call (e.g. ib_send_cm_rep(),
ib_send_cm_rtu(), etc.), a reference is taken on the cm_id.
This reference is necessary if the MAD requires a response.
The reference allows routing a response MAD back to the
cm_id, or, if no response is received, allows updating the
cm_id state to reflect the failure.
For MADs which do not generate a response from the
target, however, there's no need to hold a reference on the cm_id.
Such MADs will not be retried by the MAD layer and their
completions do not change the state of the cm_id.
There are 2 internal calls used to allocate MADs which take
a reference on the cm_id: cm_alloc_msg() and cm_alloc_priv_msg().
The latter calls the former. It turns out that all other places
where cm_alloc_msg() is called are for MADs that do not generate
a response from the target: sending an RTU, DREP, REJ, MRA, or
SIDR REP. In all of these cases, there's no need to hold a
reference on the cm_id.
The benefit of dropping unneeded references is that it allows
destruction of the cm_id to proceed immediately. Currently,
the cm_destroy_id() call blocks as long as there's a reference
held on the cm_id. Worse, is that cm_destroy_id() will send
MADs, which it then needs to complete. Sending the MADs is
beneficial, as they notify the peer that a connection is
being destroyed. However, since the MADs hold a reference
on the cm_id, they block destruction and cannot be retried.
Move cm_id referencing from cm_alloc_msg() to cm_alloc_priv_msg().
The latter should hold a reference on the cm_id in all cases but
one, which will be handled in a separate patch. cm_alloc_priv_msg()
is used when sending a REQ, REP, DREQ, and SIDR REQ, all of which
require a response.
Also, merge common code into cm_alloc_priv_msg() and combine the
freeing of all messages which do not need a response.
Signed-off-by: Sean Hefty <shefty@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/1f0f96acace72790ecf89087fc765dead960189e.1731495873.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In several situations the CM may send a reply to a received MAD
without the reply being directly linked with a cm_id. For
example, it may send a REJ in response to a REQ which does not
match a listener. Or, it may send a DREP in response to a DREQ
if the cm_id has already been destroyed. This can happen if the
original DREP was lost and the DREQ was retried.
When such a response MAD completes, it updates a counter tracking
how many MADs were retried. However, not all response MADs issued
directly by the CM may be retries. The REJ mentioned in the example
above is such a case. To distinguish between responses which were
retries versus those that are not, the send_handler performs the
following check: is a retry if the response is not associated with
a cm_id and the response is not a REJ message.
Replace this indirect method of checking if a response is a retry
with an explicit check. Note that these retries are generated
directly by the CM, rather than retried by the MAD layer.
This change will be needed by later changes which would otherwise
break the indirect check.
Signed-off-by: Sean Hefty <shefty@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/1ee6e2a68f8de1992b9da23aa1d7e3f9f25e0036.1731495873.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When we load SSDT from efi variable (specified with efivar_ssdt=<var>
boot command line argument) a name for the variable is allocated
dynamically because we traverse all EFI variables. Unlike ACPI table
data, which is later used by ACPI engine, the name is no longer needed
once traverse is complete -- don't forget to free this memory.
Same time we silently ignore any errors happened here let's print a
message if something went wrong (but do not exit since this is not a
critical error and the system should continue to boot).
Also while here -- add a note why we keep SSDT table on success.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
When CONFIG_CMDLINE_OVERRIDE or CONFIG_CMDLINE_FORCE are configured, the
command line provided by the boot stack should be ignored, and only the
built-in command line should be taken into account.
Add the required handling of this when dealing with initrd= or dtb=
command line options in the EFI stub.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
CONFIG_CMDLINE, when set, is supposed to serve either as a fallback when
no command line is provided by the bootloader, or to be taken into account
unconditionally, depending on the configured options.
The initrd and dtb loader ignores CONFIG_CMDLINE in either case, and
only takes the EFI firmware provided load options into account. This
means that configuring the kernel with initrd= or dtb= on the built-in
command line does not produce the expected result.
Fix this by doing a separate pass over the built-in command line when
dealing with initrd= or dtb= options.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
<linux/compiler.h> defines __must_be_array() and __must_be_cstr() and
both expand to BUILD_BUG_ON_ZERO(), but <linux/build_bug.h> defines
BUILD_BUG_ON_ZERO(). Including <linux/build_bug.h> in
<linux/compiler.h> would create a cyclic dependency as
<linux/build_bug.h> already includes <linux/compiler.h>.
Fix that by defining __BUILD_BUG_ON_ZERO_MSG() in <linux/compiler.h>
and using that for __must_be_array() and __must_be_cstr().
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Link: https://lore.kernel.org/r/20241115204602.249590-1-philipp.reisner@linbit.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. All singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ocfs2: uncache inode which has failed entering the group
mm: fix NULL pointer dereference in alloc_pages_bulk_noprof
mm, doc: update read_ahead_kb for MADV_HUGEPAGE
fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args()
sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
mm/mremap: fix address wraparound in move_page_tables()
tools/mm: fix compile error
mm, swap: fix allocation and scanning race with swapoff
|
|
Revert d949d1d14fa2 ("mm: shmem: fix data-race in shmem_getattr()") as
suggested by Chuck [1]. It is causing deadlocks when accessing tmpfs over
NFS.
As Hugh commented, "added just to silence a syzbot sanitizer splat: added
where there has never been any practical problem".
Link: https://lkml.kernel.org/r/ZzdxKF39VEmXSSyN@tissot.1015granger.net [1]
Fixes: d949d1d14fa2 ("mm: shmem: fix data-race in shmem_getattr()")
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull ARM fixes from Russell King:
- Fix kernel mapping for XIP kernels
- Fix SMP support for XIP kernels
- Fix complication corner case with CFI
- Fix a typo in nommu code
- Fix cacheflush syscall when PAN is enabled on LPAE platforms
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: fix cacheflush with PAN
ARM: 9435/1: ARM/nommu: Fix typo "absence"
ARM: 9434/1: cfi: Fix compilation corner case
ARM: 9420/1: smp: Fix SMP for xip kernels
ARM: 9419/1: mm: Fix kernel memory mapping for xip kernels
|
|
Pull drm fix from Dave Airlie:
"Alex sent on a last minute revert for a amdgpu/swsmu regression:
- revert patch to fix swsmu regression"
* tag 'drm-fixes-2024-11-17' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/pm: correct the workload setting"
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.12-2024-11-16:
amdgpu:
- Revert a swsmu patch to fix a regression
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241116145320.2507156-1-alexander.deucher@amd.com
|
|
Due to an apparent copy-paste bug, the parisc implementation of
ftrace_disable_ftrace_graph_caller() doesn't actually do anything.
It enables the (already-enabled) static key rather than disabling it.
The result is that after function graph tracing has been "disabled", any
subsequent (non-graph) function tracing will inadvertently also enable
the slow fgraph return address hijacking.
Fixes: 98f2926171ae ("parisc/ftrace: use static key to enable/disable function graph tracer")
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Merge the slab feature branch for 6.13:
- Add new slab_strict_numa parameter for per-object memory policies
(Christoph Lameter)
|
