| Age | Commit message (Collapse) | Author |
|---|
|
When at least two interfaces are bonded and a bridge is enabled on the
bond, an error can occur when the bridge is removed and re-added. The
reason for the error is because promiscuous mode was not fully cleared from
the VLAN VSI in the hardware. With this change, promiscuous mode is
properly removed when the bridge disconnects from bonding.
[ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it
[ 1033.676366] bond1: making interface enp175s0f0 the new active one
[ 1033.676369] device enp95s0f0 left promiscuous mode
[ 1033.676522] device enp175s0f0 entered promiscuous mode
[ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it
[ 1041.944874] device enp175s0f0 left promiscuous mode
[ 1041.944918] bond1: now running without any active interface!
Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations")
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.
Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Avoid enabling or disabling VLAN 0 when trying to set promiscuous
VLAN mode if double VLAN mode is enabled. This fix is needed
because the driver tries to add the VLAN 0 filter twice (once for
inner and once for outer) when double VLAN mode is enabled. The
filter program is rejected by the firmware when double VLAN is
enabled, because the promiscuous filter only needs to be set once.
This issue was missed in the initial implementation of double VLAN
mode.
Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixes headset microphone detection on Clevo NS50PU and NS70PU.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220817135144.34103-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull virtio fixes from Michael Tsirkin:
"Most notably this drops the commits that trip up google cloud (turns
out, any legacy device).
Plus a kerneldoc patch"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: kerneldocs fixes and enhancements
virtio: Revert "virtio: find_vqs() add arg sizes"
virtio_vdpa: Revert "virtio_vdpa: support the arg sizes of find_vqs()"
virtio_pci: Revert "virtio_pci: support the arg sizes of find_vqs()"
virtio-mmio: Revert "virtio_mmio: support the arg sizes of find_vqs()"
virtio: Revert "virtio: add helper virtio_find_vqs_ctx_size()"
virtio_net: Revert "virtio_net: set the default max ring size by find_vqs()"
|
|
We're seeing a weird problem in production where we have overlapping
extent items in the extent tree. It's unclear where these are coming
from, and in debugging we realized there's no check in the tree checker
for this sort of problem. Add a check to the tree-checker to make sure
that the extents do not overlap each other.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During log replay, at add_link(), we may increment the link count of
another inode that has a reference that conflicts with a new reference
for the inode currently being processed.
During log replay, at add_link(), we may drop (unlink) a reference from
some inode in the subvolume tree if that reference conflicts with a new
reference found in the log for the inode we are currently processing.
After the unlink, If the link count has decreased from 1 to 0, then we
increment the link count to prevent the inode from being deleted if it's
evicted by an iput() call, because we may have references to add to that
inode later on (and we will fixup its link count later during log replay).
However incrementing the link count from 0 to 1 triggers a warning:
$ cat fs/inode.c
(...)
void inc_nlink(struct inode *inode)
{
if (unlikely(inode->i_nlink == 0)) {
WARN_ON(!(inode->i_state & I_LINKABLE));
atomic_long_dec(&inode->i_sb->s_remove_count);
}
(...)
The I_LINKABLE flag is only set when creating an O_TMPFILE file, so it's
never set during log replay.
Most of the time, the warning isn't triggered even if we dropped the last
reference of the conflicting inode, and this is because:
1) The conflicting inode was previously marked for fixup, through a call
to link_to_fixup_dir(), which increments the inode's link count;
2) And the last iput() on the inode has not triggered eviction of the
inode, nor was eviction triggered after the iput(). So at add_link(),
even if we unlink the last reference of the inode, its link count ends
up being 1 and not 0.
So this means that if eviction is triggered after link_to_fixup_dir() is
called, at add_link() we will read the inode back from the subvolume tree
and have it with a correct link count, matching the number of references
it has on the subvolume tree. So if when we are at add_link() the inode
has exactly one reference only, its link count is 1, and after the unlink
its link count becomes 0.
So fix this by using set_nlink() instead of inc_nlink(), as the former
accepts a transition from 0 to 1 and it's what we use in other similar
contexts (like at link_to_fixup_dir().
Also make add_inode_ref() use set_nlink() instead of inc_nlink() to
bump the link count from 0 to 1.
The warning is actually harmless, but it may scare users. Josef also ran
into it recently.
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During log replay, when processing inode references, if we get an error
when looking up for an extended reference at __add_inode_ref(), we ignore
it and proceed, returning success (0) if no other error happens after the
lookup. This is obviously wrong because in case an extended reference
exists and it encodes some name not in the log, we need to unlink it,
otherwise the filesystem state will not match the state it had after the
last fsync.
So just make __add_inode_ref() return an error it gets from the extended
reference lookup.
Fixes: f186373fef005c ("btrfs: extended inode refs")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have been hitting the following lockdep splat with btrfs/187 recently
WARNING: possible circular locking dependency detected
5.19.0-rc8+ #775 Not tainted
------------------------------------------------------
btrfs/752500 is trying to acquire lock:
ffff97e1875a97b8 (btrfs-treloc-02#2){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110
but task is already holding lock:
ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (btrfs-tree-01/1){+.+.}-{3:3}:
down_write_nested+0x41/0x80
__btrfs_tree_lock+0x24/0x110
btrfs_init_new_buffer+0x7d/0x2c0
btrfs_alloc_tree_block+0x120/0x3b0
__btrfs_cow_block+0x136/0x600
btrfs_cow_block+0x10b/0x230
btrfs_search_slot+0x53b/0xb70
btrfs_lookup_inode+0x2a/0xa0
__btrfs_update_delayed_inode+0x5f/0x280
btrfs_async_run_delayed_root+0x24c/0x290
btrfs_work_helper+0xf2/0x3e0
process_one_work+0x271/0x590
worker_thread+0x52/0x3b0
kthread+0xf0/0x120
ret_from_fork+0x1f/0x30
-> #1 (btrfs-tree-01){++++}-{3:3}:
down_write_nested+0x41/0x80
__btrfs_tree_lock+0x24/0x110
btrfs_search_slot+0x3c3/0xb70
do_relocation+0x10c/0x6b0
relocate_tree_blocks+0x317/0x6d0
relocate_block_group+0x1f1/0x560
btrfs_relocate_block_group+0x23e/0x400
btrfs_relocate_chunk+0x4c/0x140
btrfs_balance+0x755/0xe40
btrfs_ioctl+0x1ea2/0x2c90
__x64_sys_ioctl+0x88/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (btrfs-treloc-02#2){+.+.}-{3:3}:
__lock_acquire+0x1122/0x1e10
lock_acquire+0xc2/0x2d0
down_write_nested+0x41/0x80
__btrfs_tree_lock+0x24/0x110
btrfs_lock_root_node+0x31/0x50
btrfs_search_slot+0x1cb/0xb70
replace_path+0x541/0x9f0
merge_reloc_root+0x1d6/0x610
merge_reloc_roots+0xe2/0x260
relocate_block_group+0x2c8/0x560
btrfs_relocate_block_group+0x23e/0x400
btrfs_relocate_chunk+0x4c/0x140
btrfs_balance+0x755/0xe40
btrfs_ioctl+0x1ea2/0x2c90
__x64_sys_ioctl+0x88/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Chain exists of:
btrfs-treloc-02#2 --> btrfs-tree-01 --> btrfs-tree-01/1
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-tree-01/1);
lock(btrfs-tree-01);
lock(btrfs-tree-01/1);
lock(btrfs-treloc-02#2);
*** DEADLOCK ***
7 locks held by btrfs/752500:
#0: ffff97e292fdf460 (sb_writers#12){.+.+}-{0:0}, at: btrfs_ioctl+0x208/0x2c90
#1: ffff97e284c02050 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0x55f/0xe40
#2: ffff97e284c00878 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x236/0x400
#3: ffff97e292fdf650 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xef/0x610
#4: ffff97e284c02378 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0
#5: ffff97e284c023a0 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0
#6: ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110
stack backtrace:
CPU: 1 PID: 752500 Comm: btrfs Not tainted 5.19.0-rc8+ #775
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x56/0x73
check_noncircular+0xd6/0x100
? lock_is_held_type+0xe2/0x140
__lock_acquire+0x1122/0x1e10
lock_acquire+0xc2/0x2d0
? __btrfs_tree_lock+0x24/0x110
down_write_nested+0x41/0x80
? __btrfs_tree_lock+0x24/0x110
__btrfs_tree_lock+0x24/0x110
btrfs_lock_root_node+0x31/0x50
btrfs_search_slot+0x1cb/0xb70
? lock_release+0x137/0x2d0
? _raw_spin_unlock+0x29/0x50
? release_extent_buffer+0x128/0x180
replace_path+0x541/0x9f0
merge_reloc_root+0x1d6/0x610
merge_reloc_roots+0xe2/0x260
relocate_block_group+0x2c8/0x560
btrfs_relocate_block_group+0x23e/0x400
btrfs_relocate_chunk+0x4c/0x140
btrfs_balance+0x755/0xe40
btrfs_ioctl+0x1ea2/0x2c90
? lock_is_held_type+0xe2/0x140
? lock_is_held_type+0xe2/0x140
? __x64_sys_ioctl+0x88/0xc0
__x64_sys_ioctl+0x88/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This isn't necessarily new, it's just tricky to hit in practice. There
are two competing things going on here. With relocation we create a
snapshot of every fs tree with a reloc tree. Any extent buffers that
get initialized here are initialized with the reloc root lockdep key.
However since it is a snapshot, any blocks that are currently in cache
that originally belonged to the fs tree will have the normal tree
lockdep key set. This creates the lock dependency of
reloc tree -> normal tree
for the extent buffer locking during the first phase of the relocation
as we walk down the reloc root to relocate blocks.
However this is problematic because the final phase of the relocation is
merging the reloc root into the original fs root. This involves
searching down to any keys that exist in the original fs root and then
swapping the relocated block and the original fs root block. We have to
search down to the fs root first, and then go search the reloc root for
the block we need to replace. This creates the dependency of
normal tree -> reloc tree
which is why lockdep complains.
Additionally even if we were to fix this particular mismatch with a
different nesting for the merge case, we're still slotting in a block
that has a owner of the reloc root objectid into a normal tree, so that
block will have its lockdep key set to the tree reloc root, and create a
lockdep splat later on when we wander into that block from the fs root.
Unfortunately the only solution here is to make sure we do not set the
lockdep key to the reloc tree lockdep key normally, and then reset any
blocks we wander into from the reloc root when we're doing the merged.
This solves the problem of having mixed tree reloc keys intermixed with
normal tree keys, and then allows us to make sure in the merge case we
maintain the lock order of
normal tree -> reloc tree
We handle this by setting a bit on the reloc root when we do the search
for the block we want to relocate, and any block we search into or COW
at that point gets set to the reloc tree key. This works correctly
because we only ever COW down to the parent node, so we aren't resetting
the key for the block we're linking into the fs root.
With this patch we no longer have the lockdep splat in btrfs/187.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These definitions exist in disk-io.c, which is not related to the
locking. Move this over to locking.h/c where it makes more sense.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In btrfs_relocate_block_group(), the rc is allocated. Then
btrfs_relocate_block_group() calls
relocate_block_group()
prepare_to_relocate()
set_reloc_control()
that assigns rc to the variable fs_info->reloc_ctl. When
prepare_to_relocate() returns, it calls
btrfs_commit_transaction()
btrfs_start_dirty_block_groups()
btrfs_alloc_path()
kmem_cache_zalloc()
which may fail for example (or other errors could happen). When the
failure occurs, btrfs_relocate_block_group() detects the error and frees
rc and doesn't set fs_info->reloc_ctl to NULL. After that, in
btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and
then used, which may cause a use-after-free bug.
This possible bug can be triggered by calling btrfs_ioctl_balance()
before calling btrfs_ioctl_defrag().
To fix this possible bug, in prepare_to_relocate(), check if
btrfs_commit_transaction() fails. If the failure occurs,
unset_reloc_control() is called to set fs_info->reloc_ctl to NULL.
The error log in our fault-injection testing is shown as follows:
[ 58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs]
...
[ 58.753577] Call Trace:
...
[ 58.755800] kasan_report+0x45/0x60
[ 58.756066] btrfs_init_reloc_root+0x7ca/0x920 [btrfs]
[ 58.757304] record_root_in_trans+0x792/0xa10 [btrfs]
[ 58.757748] btrfs_record_root_in_trans+0x463/0x4f0 [btrfs]
[ 58.758231] start_transaction+0x896/0x2950 [btrfs]
[ 58.758661] btrfs_defrag_root+0x250/0xc00 [btrfs]
[ 58.759083] btrfs_ioctl_defrag+0x467/0xa00 [btrfs]
[ 58.759513] btrfs_ioctl+0x3c95/0x114e0 [btrfs]
...
[ 58.768510] Allocated by task 23683:
[ 58.768777] ____kasan_kmalloc+0xb5/0xf0
[ 58.769069] __kmalloc+0x227/0x3d0
[ 58.769325] alloc_reloc_control+0x10a/0x3d0 [btrfs]
[ 58.769755] btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs]
[ 58.770228] btrfs_relocate_chunk+0xf1/0x760 [btrfs]
[ 58.770655] __btrfs_balance+0x1326/0x1f10 [btrfs]
[ 58.771071] btrfs_balance+0x3150/0x3d30 [btrfs]
[ 58.771472] btrfs_ioctl_balance+0xd84/0x1410 [btrfs]
[ 58.771902] btrfs_ioctl+0x4caa/0x114e0 [btrfs]
...
[ 58.773337] Freed by task 23683:
...
[ 58.774815] kfree+0xda/0x2b0
[ 58.775038] free_reloc_control+0x1d6/0x220 [btrfs]
[ 58.775465] btrfs_relocate_block_group+0x115c/0x1e20 [btrfs]
[ 58.775944] btrfs_relocate_chunk+0xf1/0x760 [btrfs]
[ 58.776369] __btrfs_balance+0x1326/0x1f10 [btrfs]
[ 58.776784] btrfs_balance+0x3150/0x3d30 [btrfs]
[ 58.777185] btrfs_ioctl_balance+0xd84/0x1410 [btrfs]
[ 58.777621] btrfs_ioctl+0x4caa/0x114e0 [btrfs]
...
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When using callback there was a flow of
ret = -EINVAL
if (callback) {
offset = callback();
goto out;
}
...
offset = some other value in case of no callback;
ret = offset;
out:
return ret;
which causes the snd_info_entry_llseek() to return -EINVAL when there is
callback handler. Fix this by setting "ret" directly to callback return
value before jumping to "out".
Fixes: 73029e0ff18d ("ALSA: info - Implement common llseek for binary mode")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220817124924.3974577-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This test fails on current kernel releases because the flotwable path
now calls dst_check from packet path and will then remove the offload.
Test script has two purposes:
1. check that file (random content) can be sent to other netns (and vv)
2. check that the flow is offloaded (rather than handled by classic
forwarding path).
Since dst_check is in place, 2) fails because the nftables ruleset in
router namespace 1 intentionally blocks traffic under the assumption
that packets are not passed via classic path at all.
Rework this: Instead of blocking traffic, create two named counters, one
for original and one for reverse direction.
The first three test cases are handled by classic forwarding path
(path mtu discovery is disabled and packets exceed MTU).
But all other tests enable PMTUD, so the originator and responder are
expected to lower packet size and flowtable is expected to do the packet
forwarding.
For those tests, check that the packet counters (which are only
incremented for packets that are passed up to classic forward path)
are significantly lower than the file size transferred.
I've tested that the counter-checks fail as expected when the 'flow add'
statement is removed from the ruleset.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
ATM on x86 laptops where we want userspace to use the acpi_video backlight
device we often register both the GPU's native backlight device and
acpi_video's firmware acpi_video# backlight device. This relies on
userspace preferring firmware type backlight devices over native ones, but
registering 2 backlight devices for a single display really is undesirable.
On x86 laptops where the native GPU backlight device should be used,
the registering of other backlight devices is avoided by their drivers
using acpi_video_get_backlight_type() and only registering their backlight
if the return value matches their type.
acpi_video_get_backlight_type() uses
backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native
driver is available and will never return native if this returns
false. This means that the GPU's native backlight registering code
cannot just call acpi_video_get_backlight_type() to determine if it
should register its backlight, since acpi_video_get_backlight_type() will
never return native until the native backlight has already registered.
To fix this add a new internal native function parameter to
acpi_video_get_backlight_type(), which when set to true will make
acpi_video_get_backlight_type() behave as if a native backlight has
already been registered.
And add a new acpi_video_backlight_use_native() helper, which sets this
to true, for use in native GPU backlight code.
Changes in v2:
- Replace adding a native parameter to acpi_video_get_backlight_type() with
adding a new acpi_video_backlight_use_native() helper.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add 4 new Dolphin Systems, same configuration as older systems.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220816151901.1398007-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
KVM does not support AArch32 EL0 on asymmetric systems. To that end,
prevent userspace from configuring a vCPU in such a state through
setting PSTATE.
It is already ABI that KVM rejects such a write on a system where
AArch32 EL0 is unsupported. Though the kernel's definition of a 32bit
system changed in commit 2122a833316f ("arm64: Allow mismatched
32-bit EL0 support"), KVM's did not.
Fixes: 2122a833316f ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-3-oliver.upton@linux.dev
|
|
KVM does not support AArch32 on asymmetric systems. To that end, enforce
AArch64-only behavior on PMCR_EL1.LC when on an asymmetric system.
Fixes: 2122a833316f ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-2-oliver.upton@linux.dev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
====================
Intel Wired LAN Driver Updates 2022-08-16)
This series contains updates to i40e driver only.
Przemyslaw fixes issue with checksum offload on VXLAN tunnels.
Alan disables VSI for Tx timeout when all recovery methods have failed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even though the normal strparser's init function has a return
value we got away with ignoring errors until now, as it only
validates the parameters and we were passing correct parameters.
tls_strp can fail to init on memory allocation errors, which
syzbot duly induced and reported.
Reported-by: syzbot+abd45eb849b05194b1b6@syzkaller.appspotmail.com
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device CLSA0101 has two instances of CS35L41
connected by I2C.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220727095924.80884-5-tanureal@opensource.cirrus.com
Link: https://lore.kernel.org/r/20220816194639.13870-1-cam@neo-zeon.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
"ns1" is a too generic name, use a random suffix to avoid
errors when such a netns exists. Also allows to run multiple
instances of the script in parallel.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
NF_CONNTRACK_PROCFS was marked obsolete in commit 54b07dca68557b09
("netfilter: provide config option to disable ancient procfs parts") in
v3.3.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Some additional MMIO tuning settings have appeared in the bspec's
performance tuning guide section.
One of the tuning settings here is also documented as formal workaround
Wa_22012654132 for some steppings of DG2. However the tuning setting
applies to all DG2 variants and steppings, making it a superset of the
workaround.
v2:
- Move DRAW_WATERMARK to engine workaround section. It only moves into
the engine context on future platforms. (Lucas)
- CHICKEN_RASTER_2 needs to be handled as a masked register. (Lucas)
Bspec: 68331
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816210601.2041572-2-matthew.d.roper@intel.com
|
|
The bspec performance tuning section gives recommended settings that the
driver should program for various MMIO registers. Although these
settings aren't "workarounds" we use the workaround infrastructure to do
this programming to make sure it is handled at the appropriate places
and doesn't conflict with any real workarounds.
Since more of these are starting to show up on recent platforms, it's a
good time to create a dedicated function to hold them so that there's
less ambiguity about how/where to implement new ones.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816210601.2041572-1-matthew.d.roper@intel.com
|
|
In the gnet_stats_add_queue_cpu function, the qstats->qlen statistics
are incorrectly set to qcpu->backlog.
Fixes: 448e163f8b9b ("gen_stats: Add gnet_stats_add_queue()")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220815030848.276746-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
riscv_isa_ext_keys[] is an array of static keys used in the unified
ISA extension framework. The keys added to this array may be used
anywhere, including in modules. Ensure the keys remain writable by
placing them in the data section.
The need to change riscv_isa_ext_keys[]'s section was found when the
kvm module started failing to load. Commit 8eb060e10185 ("arch/riscv:
add Zihintpause support") adds a static branch check for a newly
added isa-ext key to cpu_relax(), which kvm uses.
Fixes: c360cbec3511 ("riscv: introduce unified static key mechanism for ISA extensions")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Cc: stable@vger.kernel.org
Reported-by: Ron Economos <re@w6rz.net>
Reported-by: Anup Patel <apatel@ventanamicro.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220816163058.3004536-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add comments to document gfx_off related members of struct amdgpu_gfx.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add documentation explaining those two new files.
While here, add a note about the value type.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement functions to get and set GFXOFF's entry count and residency
for vangogh.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add debugfs interface to log GFXOFF statistics:
- Read amdgpu_gfxoff_count to get the total GFXOFF entry count at the
time of query since system power-up
- Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop.
Read it to get average GFXOFF residency % multiplied by 100
during the last logging interval.
Both features are designed to be keep the values persistent between
suspends.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes five checkpatch warnings:
CHECK: Please don't use multiple blank lines
+
+
ERROR: Macros with complex values should be enclosed in parentheses
+#define MAX_I64 \
+ (int64_t)((1ULL << 63) - 1)
WARNING: Missing a blank line after declarations
+ struct bw_fixed res;
+ ASSERT(value < BW_FIXED_MAX_I32 && value > BW_FIXED_MIN_I32);
ERROR: that open brace { should be on the previous line
+ do
+ {
ERROR: that open brace { should be on the previous line
+ if (remainder >= arg2_value)
+ {
Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The definition of MIN_I64 in bw_fixed.c can cause gcc to whinge about
integer overflow, because it is treated as a positive value, which is
then negated. The temporary positive value is not necessarily
representable.
This causes the following warning:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/bw_fixed.c:30:19:
warning: integer overflow in expression ‘-9223372036854775808’ of type
‘long long int’ results in ‘-9223372036854775808’ [-Woverflow]
30 | (int64_t)(-(1LL << 63))
| ^
Writing out (-MAX_I64 - 1) works instead.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is no semicolon after '}' in line 510.
Signed-off-by: min tang <tangmin@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The double `aligned' is duplicated in line 1070, remove one.
Signed-off-by: min tang <tangmin@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We have some old code associated with DML, which we had plans to use,
but at some point, we just moved away from it. This commit removes the
dml_wrapper* files since they are not used anymore.
Reported-by: Magali Lemes <magalilemes00@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The second jump table is required on live migration or mulitple VF
configuration on Aldebaran. With this implemented, the first level
jump table(hw used) will be same, mec fw internal will use the
second level jump table jump to the real functionality implementation.
so the different VF can load different version of MEC as long as
they support sjt
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, we are using soc._clock_tmp[] to temporarily store and modify
data from soc.clock_limits[] before copying it back into
soc.clock_limits[] (because modifying data directly in
soc.clock_limits[] causes unintended behavior). However, this approach
has a number of downsides, such as:
1. struct _vcs_dpi_soc_bounding_box_st's creation/destruction
aren't well defined (which could mean more unintended
behavior).
2. Throwing "temp" varibles in structs everywhere doesn't make
for a particularly readable codebase.
For these reasons, we should get rid of soc._clock_tmp[] by defining a
struct scratch within struct dc that, contains within it all of the
temporary variables (including _clock_tmp[]) such that it is obvious how
they are intended to be used.
Co-authored-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, we only attempt to setup DSC at the virtual DPCD port,
however many modern displays come with DSC support and MST hubs can now
support DSC pass-through. So, to more optimally make use of the
available bandwidth, use DSC pass-through when possible by adding DSC
pass-through enablement support into the DSC enable sequence.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a mode validation routine for DSC pass-through. Both the link from
source to hub, and the link from hub to monitor are checked, according
to the current link training result and full pbn returned by enum path
resource sideband message.
Pick up the minimum value as the bandwidth bottleneck for the end to
end link bandwidth constraint, and check if the maximum DSC decompression
bandwidth can fit.
v2: squash in DSC CONFIG_DRM_AMD_DC_DCN compilation fix (Hamza)
Co-authored-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, there is no way to identify if DSC pass-through can be
enabled and what aux DSC pass-through requests ought to be sent to. So,
add a variable to struct drm_dp_mst_port that keeps track of the
aforementioned information.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
AMD GPU display manager (DM) maps DRM pixel blend modes (None,
Pre-multiplied, Coverage) to MPC hw blocks through blend configuration
options. Describe relevant elements and how to set and test them to get
the expected DRM blend mode on DCN hw.
v2:
- add ref tag (Tales)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Describe structs and enums used to set blend mode properties to MPC
blocks. Some pieces of information are already available as code
comments, and were just formatted. Others were collected and summarised
from discussions on AMD issue tracker[1][2].
[1] https://gitlab.freedesktop.org/drm/amd/-/issues/1734
[2] https://gitlab.freedesktop.org/drm/amd/-/issues/1769
v2:
- fix typos (Tales)
- add MPCC to MPC entry in the glossary
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add details about color correction capabilities and explain a bit about
differences between DC hw generations and also how they are mapped
between DRM and DC interface. Two schemas for DCN 2.0 and 3.0 (converted
to svg from the original png) is included to illustrate it. They were
obtained from a discussion[1] in the amd-gfx mailing list.
[1] https://lore.kernel.org/amd-gfx/20220422142811.dm6vtk6v64jcwydk@mail.igalia.com/
v1:
- remove redundant comments (Harry)
- fix typos (Harry)
v2:
- reword introduction of color section
- add co-dev tag for Harry - who provided most of the info
- fix typos (Tales)
- describe missing struct parameters (Tales and Siqueira)
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
AMDGPU DM maps DRM color management properties (degamma, ctm and gamma)
to DC color correction entities. Part of this mapping is already
documented as code comments and can be converted as kernel docs.
v2:
- rebase to amd-staging-drm-next
- fix typos (Tales)
- undo kernel-docs inside functions (Tales)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 4c7631800e6bf0eced08dd7b4f793fcd972f597d.
Triggered GFX hangs with GNOME Wayland on Navi 21.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2117
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If amdgpu_cs_vm_handling returns r != 0, then it will unlock the
bo_list_mutex inside the function amdgpu_cs_vm_handling and again on
amdgpu_cs_parser_fini. This problem results in the following
use-after-free problem:
[ 220.280990] ------------[ cut here ]------------
[ 220.281000] refcount_t: underflow; use-after-free.
[ 220.281019] WARNING: CPU: 1 PID: 3746 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
[ 220.281029] ------------[ cut here ]------------
[ 220.281415] CPU: 1 PID: 3746 Comm: chrome:cs0 Tainted: G W L ------- --- 5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1
[ 220.281421] Hardware name: System manufacturer System Product Name/ROG STRIX X570-I GAMING, BIOS 4403 04/27/2022
[ 220.281426] RIP: 0010:refcount_warn_saturate+0xba/0x110
[ 220.281431] Code: 01 01 e8 79 4a 6f 00 0f 0b e9 42 47 a5 00 80 3d de
7e be 01 00 75 85 48 c7 c7 f8 98 8e 98 c6 05 ce 7e be 01 01 e8 56 4a
6f 00 <0f> 0b e9 1f 47 a5 00 80 3d b9 7e be 01 00 0f 85 5e ff ff ff 48
c7
[ 220.281437] RSP: 0018:ffffb4b0d18d7a80 EFLAGS: 00010282
[ 220.281443] RAX: 0000000000000026 RBX: 0000000000000003 RCX: 0000000000000000
[ 220.281448] RDX: 0000000000000001 RSI: ffffffff988d06dc RDI: 00000000ffffffff
[ 220.281452] RBP: 00000000ffffffff R08: 0000000000000000 R09: ffffb4b0d18d7930
[ 220.281457] R10: 0000000000000003 R11: ffffa0672e2fffe8 R12: ffffa058ca360400
[ 220.281461] R13: ffffa05846c50a18 R14: 00000000fffffe00 R15: 0000000000000003
[ 220.281465] FS: 00007f82683e06c0(0000) GS:ffffa066e2e00000(0000) knlGS:0000000000000000
[ 220.281470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 220.281475] CR2: 00003590005cc000 CR3: 00000001fca46000 CR4: 0000000000350ee0
[ 220.281480] Call Trace:
[ 220.281485] <TASK>
[ 220.281490] amdgpu_cs_ioctl+0x4e2/0x2070 [amdgpu]
[ 220.281806] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu]
[ 220.282028] drm_ioctl_kernel+0xa4/0x150
[ 220.282043] drm_ioctl+0x21f/0x420
[ 220.282053] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu]
[ 220.282275] ? lock_release+0x14f/0x460
[ 220.282282] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 220.282290] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 220.282297] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282305] ? _raw_spin_unlock_irqrestore+0x40/0x60
[ 220.282317] amdgpu_drm_ioctl+0x4a/0x80 [amdgpu]
[ 220.282534] __x64_sys_ioctl+0x90/0xd0
[ 220.282545] do_syscall_64+0x5b/0x80
[ 220.282551] ? futex_wake+0x6c/0x150
[ 220.282568] ? lock_is_held_type+0xe8/0x140
[ 220.282580] ? do_syscall_64+0x67/0x80
[ 220.282585] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282592] ? do_syscall_64+0x67/0x80
[ 220.282597] ? do_syscall_64+0x67/0x80
[ 220.282602] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282609] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 220.282616] RIP: 0033:0x7f8282a4f8bf
[ 220.282639] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10
00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00
0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00
00
[ 220.282644] RSP: 002b:00007f82683df410 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 220.282651] RAX: ffffffffffffffda RBX: 00007f82683df588 RCX: 00007f8282a4f8bf
[ 220.282655] RDX: 00007f82683df4d0 RSI: 00000000c0186444 RDI: 0000000000000018
[ 220.282659] RBP: 00007f82683df4d0 R08: 00007f82683df5e0 R09: 00007f82683df4b0
[ 220.282663] R10: 00001d04000a0600 R11: 0000000000000246 R12: 00000000c0186444
[ 220.282667] R13: 0000000000000018 R14: 00007f82683df588 R15: 0000000000000003
[ 220.282689] </TASK>
[ 220.282693] irq event stamp: 6232311
[ 220.282697] hardirqs last enabled at (6232319): [<ffffffff9718cd7e>] __up_console_sem+0x5e/0x70
[ 220.282704] hardirqs last disabled at (6232326): [<ffffffff9718cd63>] __up_console_sem+0x43/0x70
[ 220.282709] softirqs last enabled at (6232072): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170
[ 220.282716] softirqs last disabled at (6232061): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170
[ 220.282722] ---[ end trace 0000000000000000 ]---
Therefore, remove the mutex_unlock from the amdgpu_cs_vm_handling
function, so that amdgpu_cs_submit and amdgpu_cs_parser_fini can handle
the unlock.
Fixes: 90af0ca047f3 ("drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The timing programming inside DCN is far from trivial, it has multiple
parameters associated with that, and the lack of documentation does not
help comprehend this already complicated topic. This commit tries to
improve this situation by expanding the documentation of dc_crtc_timing
and the VTG program function.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are no backing hardware registers for ih_soft ring.
As a result, don't try to access hardware registers for read
and write pointers when processing interrupts on the IH soft
ring.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the DCN code, we can find some references to three different pipe
split policies but no clear description. This commit adds some
kernel-doc that explains more about these options and a little bit of
their impact.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
