summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-23drm/i915: Fix enabled_planes bitmaskVille Syrjälä
The enabled_planes bitmask was supposed to track logically enabled planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting even disabled planes into the bitmask since intel_plane_atomic_check_with_state() only takes the early exit if the plane was disabled and stays disabled. I think I misread the early said codepath to exit whenever the plane is logically disabled, which is not true. So let's fix this up properly and set the bit only when the plane actually is logically enabled. Cc: Manasi Navare <manasi.d.navare@intel.com> Fixes: ee42ec19ca2e ("drm/i915: Track logically enabled planes for hw state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> (cherry picked from commit 97bc7ffa1b1e9a8672e0a8e9a96680b0c3717427) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915: Disable LTTPR support when the LTTPR rev < 1.4Imre Deak
By the specification the 0xF0000 - 0xF02FF range is only valid if the LTTPR revision at 0xF0000 is at least 1.4. Disable the LTTPR support otherwise. Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-4-imre.deak@intel.com (cherry picked from commit 1663ad4936e0679443a315fe342f99636a2420dd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915: Disable LTTPR support when the DPCD rev < 1.4Imre Deak
By the specification the 0xF0000-0xF02FF range is only valid when the DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so. Trying to detect LTTPRs returned corrupted values for the above DPCD range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD revision 1.2 connected. v2: Add the actual version check. v3: Fix s/DRPX/DPRX/ typo. Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317190149.4032966-1-imre.deak@intel.com (cherry picked from commit 264613b406eb0d74cd9ca582c717c5e2c5a975ea) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23drm/i915/ilk-glk: Fix link training on links with LTTPRsImre Deak
The spec requires to use at least 3.2ms for the AUX timeout period if there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming spec update makes this more specific, by requiring a 3.2ms minimum timeout period for the LTTPR detection reading the 0xF0000-0xF0007 range (3.6.5.1). Accordingly disable LTTPR detection until GLK, where the maximum timeout we can set is only 1.6ms. Link training in the non-transparent mode is known to fail at least on some SKL systems with a WD19 dock on the link, which exposes an LTTPR (see the References below). While this could have different reasons besides the too short AUX timeout used, not detecting LTTPRs (and so not using the non-transparent LT mode) fixes link training on these systems. While at it add a code comment about the platform specific maximum timeout values. v2: Add a comment about the g4x maximum timeout as well. (Ville) Reported-by: Takashi Iwai <tiwai@suse.de> Reported-and-tested-by: Santiago Zarate <santiago.zarate@suse.com> Reported-and-tested-by: Bodo Graumann <mail@bodograumann.de> References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166 Fixes: b30edfd8d0b4 ("drm/i915: Switch to LTTPR non-transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Takashi Iwai <tiwai@suse.de> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com (cherry picked from commit 984982f3ef7b240cd24c2feb2762d81d9d8da3c2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-23USB: cdc-acm: downgrade message to debugOliver Neukum
This failure is so common that logging an error here amounts to spamming log files. Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: cdc-acm: untangle a circular dependency between callback and softintOliver Neukum
We have a cycle of callbacks scheduling works which submit URBs with thos callbacks. This needs to be blocked, stopped and unblocked to untangle the circle. The issue leads to faults like: [ 55.068392] Unable to handle kernel paging request at virtual address 6b6b6c03 [ 55.075624] pgd = be866494 [ 55.078335] [6b6b6c03] *pgd=00000000 [ 55.081924] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 55.087238] Modules linked in: ppp_async crc_ccitt ppp_generic slhc xt_TCPMSS xt_tcpmss xt_hl nf_log_ipv6 nf_log_ipv4 nf_log_common xt_policy xt_limit xt_conntrack xt_tcpudp xt_pkttype ip6table_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables des_generic md5 sch_fq_codel cdc_mbim cdc_wdm cdc_ncm usbnet mii cdc_acm usb_storage ip_tunnel xfrm_user xfrm6_tunnel tunnel6 xfrm4_tunnel tunnel4 esp6 esp4 ah6 ah4 xfrm_algo xt_LOG xt_LED xt_comment x_tables ipv6 [ 55.134954] CPU: 0 PID: 82 Comm: kworker/0:2 Tainted: G T 5.8.17 #1 [ 55.142526] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 55.148304] Workqueue: events acm_softint [cdc_acm] [ 55.153196] PC is at kobject_get+0x10/0xa4 [ 55.157302] LR is at usb_get_dev+0x14/0x1c [ 55.161402] pc : [<8047c06c>] lr : [<80560448>] psr: 20000193 [ 55.167671] sp : bca39ea8 ip : 00007374 fp : bf6cbd80 [ 55.172899] r10: 00000000 r9 : bdd92284 r8 : bdd92008 [ 55.178128] r7 : 6b6b6b6b r6 : fffffffe r5 : 60000113 r4 : 6b6b6be3 [ 55.184658] r3 : 6b6b6b6b r2 : 00000111 r1 : 00000000 r0 : 6b6b6be3 [ 55.191191] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 55.198417] Control: 10c5387d Table: bcf0c06a DAC: 00000051 [ 55.204168] Process kworker/0:2 (pid: 82, stack limit = 0x9bdd2a89) [ 55.210439] Stack: (0xbca39ea8 to 0xbca3a000) [ 55.214805] 9ea0: bf6cbd80 80769a50 6b6b6b6b 80560448 bdeb0500 8056bfe8 [ 55.222991] 9ec0: 00000002 b76da000 00000000 bdeb0500 bdd92448 bca38000 bdeb0510 8056d69c [ 55.231177] 9ee0: bca38000 00000000 80c050fc 00000000 bca39f44 09d42015 00000000 00000001 [ 55.239363] 9f00: bdd92448 bdd92438 bdd92000 7f1158c4 bdd92448 bca2ee00 bf6cbd80 bf6cef00 [ 55.247549] 9f20: 00000000 00000000 00000000 801412d8 bf6cbd98 80c03d00 bca2ee00 bf6cbd80 [ 55.255735] 9f40: bca2ee14 bf6cbd98 80c03d00 00000008 bca38000 80141568 00000000 80c446ae [ 55.263921] 9f60: 00000000 bc9ed880 bc9f0700 bca38000 bc117eb4 80141524 bca2ee00 bc9ed8a4 [ 55.272107] 9f80: 00000000 80147cc8 00000000 bc9f0700 80147b84 00000000 00000000 00000000 [ 55.280292] 9fa0: 00000000 00000000 00000000 80100148 00000000 00000000 00000000 00000000 [ 55.288477] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 55.296662] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 55.304860] [<8047c06c>] (kobject_get) from [<80560448>] (usb_get_dev+0x14/0x1c) [ 55.312271] [<80560448>] (usb_get_dev) from [<8056bfe8>] (usb_hcd_unlink_urb+0x50/0xd8) [ 55.320286] [<8056bfe8>] (usb_hcd_unlink_urb) from [<8056d69c>] (usb_kill_urb.part.0+0x44/0xd0) [ 55.329004] [<8056d69c>] (usb_kill_urb.part.0) from [<7f1158c4>] (acm_softint+0x4c/0x10c [cdc_acm]) [ 55.338082] [<7f1158c4>] (acm_softint [cdc_acm]) from [<801412d8>] (process_one_work+0x19c/0x3e8) [ 55.346969] [<801412d8>] (process_one_work) from [<80141568>] (worker_thread+0x44/0x4dc) [ 55.355072] [<80141568>] (worker_thread) from [<80147cc8>] (kthread+0x144/0x180) [ 55.362481] [<80147cc8>] (kthread) from [<80100148>] (ret_from_fork+0x14/0x2c) [ 55.369706] Exception stack(0xbca39fb0 to 0xbca39ff8) Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311130126.15972-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23cdc-acm: fix BREAK rx code path adding necessary callsOliver Neukum
Counting break events is nice but we should actually report them to the tty layer. Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: gadget: udc: amd5536udc_pci fix null-ptr-dereferenceTong Zhang
init_dma_pools() calls dma_pool_create(...dev->dev) to create dma pool. however, dev->dev is actually set after calling init_dma_pools(), which effectively makes dma_pool_create(..NULL) and cause crash. To fix this issue, init dma only after dev->dev is set. [ 1.317993] RIP: 0010:dma_pool_create+0x83/0x290 [ 1.323257] Call Trace: [ 1.323390] ? pci_write_config_word+0x27/0x30 [ 1.323626] init_dma_pools+0x41/0x1a0 [snps_udc_core] [ 1.323899] udc_pci_probe+0x202/0x2b1 [amd5536udc_pci] Fixes: 7c51247a1f62 (usb: gadget: udc: Provide correct arguments for 'dma_pool_create') Cc: stable <stable@vger.kernel.org> Signed-off-by: Tong Zhang <ztong0001@gmail.com> Link: https://lore.kernel.org/r/20210317230400.357756-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel MerrifieldAndy Shevchenko
It seems that on Intel Merrifield platform the USB PHY shouldn't be suspended. Otherwise it can't be enabled by simply change the cable in the connector. Enable corresponding quirk for the platform in question. Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") Suggested-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210322125244.79407-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: gadget: Use max speed if unspecifiedThinh Nguyen
If the gadget driver doesn't specify a max_speed, then use the controller's maximum supported speed as default. For DWC_usb32 IP, the gadget's speed maybe limited to gen2x1 rate only if the driver's max_speed is unknown. This scenario should not occur with the current implementation since the default gadget driver's max_speed should always be specified. However, to make the driver more robust and help with readability, let's cover all the scenarios in __dwc3_gadget_set_speed(). Fixes: 450b9e9fabd8 ("usb: dwc3: gadget: Set speed only up to the max supported") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/55ac7001af73bfe9bc750c6446ef4ac8cf6f9313.1615254129.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: gadget: Set gadget_max_speed when set ssp_rateThinh Nguyen
Set the dwc->gadget_max_speed to SuperSpeed Plus if the user sets the ssp_rate. The udc_set_ssp_rate() is intended for setting the gadget's speed to SuperSpeed Plus at the specified rate. Fixes: 072cab8a0fe2 ("usb: dwc3: gadget: Implement setting of SSP rate") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/0b2732e2f380d9912ee87f39dc82c2139223bad9.1615254129.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: dwc3: qcom: skip interconnect init for ACPI probeShawn Guo
The ACPI probe starts failing since commit bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver"), because there is no interconnect support for ACPI, and of_icc_get() call in dwc3_qcom_interconnect_init() will just return -EINVAL. Fix the problem by skipping interconnect init for ACPI probe, and then the NULL icc_path_ddr will simply just scheild all ICC calls. Fixes: bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311060318.25418-1-shawn.guo@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23locking/mutex: Fix non debug version of mutex_lock_io_nested()Thomas Gleixner
If CONFIG_DEBUG_LOCK_ALLOC=n then mutex_lock_io_nested() maps to mutex_lock() which is clearly wrong because mutex_lock() lacks the io_schedule_prepare()/finish() invocations. Map it to mutex_lock_io(). Fixes: f21860bac05b ("locking/mutex, sched/wait: Fix the mutex_lock_io_nested() define") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/878s6fshii.fsf@nanos.tec.linutronix.de
2021-03-23x86/mem_encrypt: Correct physical address calculation in __set_clr_pte_enc()Isaku Yamahata
The pfn variable contains the page frame number as returned by the pXX_pfn() functions, shifted to the right by PAGE_SHIFT to remove the page bits. After page protection computations are done to it, it gets shifted back to the physical address using page_level_shift(). That is wrong, of course, because that function determines the shift length based on the level of the page in the page table but in all the cases, it was shifted by PAGE_SHIFT before. Therefore, shift it back using PAGE_SHIFT to get the correct physical address. [ bp: Rewrite commit message. ] Fixes: dfaaec9033b8 ("x86: Add support for changing memory encryption attribute in early boot") Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/81abbae1657053eccc535c16151f63cd049dcb97.1616098294.git.isaku.yamahata@intel.com
2021-03-23mfd: intel_quark_i2c_gpio: Revert "Constify static struct resources"Andy Shevchenko
The structures are used as place holders, so they are modified at run-time. Obviously they may not be constants. BUG: unable to handle page fault for address: d0643220 ... CPU: 0 PID: 110 Comm: modprobe Not tainted 5.11.0+ #1 Hardware name: Intel Corp. QUARK/GalileoGen2, BIOS 0x01000200 01/01/2014 EIP: intel_quark_mfd_probe+0x93/0x1c0 [intel_quark_i2c_gpio] This partially reverts the commit c4a164f41554d2899bed94bdcc499263f41787b4. While at it, add a comment to avoid similar changes in the future. Fixes: c4a164f41554 ("mfd: Constify static struct resources") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Tested-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-22drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resumeKalyan Thota
DPU runtime resume will request for a min vote on the AXI bus as it is a necessary step before turning ON the AXI clock. The change does below 1) Move the icc path set before requesting runtime get_sync. 2) remove the dependency of hw catalog for min ib vote as it is initialized at a later point. Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-03-22net: dsa: don't assign an error value to tag_opsGeorge McCollister
Use a temporary variable to hold the return value from dsa_tag_driver_get() instead of assigning it to dst->tag_ops. Leaving an error value in dst->tag_ops can result in deferencing an invalid pointer when a deferred switch configuration happens later. Fixes: 357f203bb3b5 ("net: dsa: keep a copy of the tagging protocol in the DSA switch tree") Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22Merge tag 'mlx5-fixes-2021-03-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-03-22 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22isdn: capi: fix mismatched prototypesArnd Bergmann
gcc-11 complains about a prototype declaration that is different from the function definition: drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=] 724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf) | ~~~~^~~ In file included from drivers/isdn/capi/kcapi.c:13: drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’} 62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]); | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=] 790 | u16 capi20_get_serial(u32 contr, u8 *serial) | ~~~~^~~~~~ In file included from drivers/isdn/capi/kcapi.c:13: drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’} 64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]); | ~~~^~~~~~~~~~~~~~~~~~~~~~~ Change the definition to make them match. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23powerpc/pseries/mobility: handle premature return from H_JOINNathan Lynch
The pseries join/suspend sequence in its current form was written with the assumption that it was the only user of H_PROD and that it needn't handle spurious successful returns from H_JOIN. That's wrong; powerpc's paravirt spinlock code uses H_PROD, and CPUs entering do_join() can be woken prematurely from H_JOIN with a status of H_SUCCESS as a result. This causes all CPUs to exit the sequence early, preventing suspend from occurring at all. Add a 'done' boolean flag to the pseries_suspend_info struct, and have the waking thread set it before waking the other threads. Threads which receive H_SUCCESS from H_JOIN retry if the 'done' flag is still unset. Fixes: 9327dc0aeef3 ("powerpc/pseries/mobility: use stop_machine for join/suspend") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210315080045.460331-3-nathanl@linux.ibm.com
2021-03-23powerpc/pseries/mobility: use struct for shared stateNathan Lynch
The atomic_t counter is the only shared state for the join/suspend sequence so far, but that will change. Contain it in a struct (pseries_suspend_info), and document its intended use. No functional change. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210315080045.460331-2-nathanl@linux.ibm.com
2021-03-22net/mlx5: SF, do not use ecpu bit for vhca state processingParav Pandit
Device firmware doesn't handle ecpu bit for vhca state processing events and commands. Instead device firmware refers to the unique function id to distinguish SF of different PCI functions. When ecpu bit is used, firmware returns a syndrome. mlx5_cmd_check:780:(pid 872): MODIFY_VHCA_STATE(0xb0e) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x263211) mlx5_sf_dev_table_create:248:(pid 872): SF DEV table create err = -22 Hence, avoid using ecpu bit. Fixes: 8f0105418668 ("net/mlx5: SF, Add port add delete functionality") Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net/mlx5e: Fix division by 0 in mlx5e_select_queueMaxim Mikityanskiy
mlx5e_select_queue compares num_tc_x_num_ch to real_num_tx_queues to determine if HTB and/or PTP offloads are active. If they are, it calculates netdev_pick_tx() % num_tc_x_num_ch to prevent it from selecting HTB and PTP queues for regular traffic. However, before the channels are first activated, num_tc_x_num_ch is zero. If ndo_select_queue gets called at this point, the HTB/PTP check will pass, and mlx5e_select_queue will attempt to take a modulo by num_tc_x_num_ch, which equals to zero. This commit fixes the bug by assigning num_tc_x_num_ch to a non-zero value before registering the netdev. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net/mlx5e: Fix error path for ethtool set-priv-flagAya Levin
Expose error value when failing to comply to command: $ ethtool --set-priv-flags eth2 rx_cqe_compress [on/off] Fixes: be7e87f92b58 ("net/mlx5e: Fail safe cqe compressing/moderation mode setting") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net/mlx5e: Offload tuple rewrite for non-CT flowsDima Chumak
Setting connection tracking OVS flows and then setting non-CT flows that use tuple rewrite action (e.g. mod_tp_dst), causes the latter flows not being offloaded. Fix by using a stricter condition in modify_header_match_supported() to check tuple rewrite support only for flows with CT action. The check is factored out into standalone modify_tuple_supported() function to aid readability. Fixes: 7e36feeb0467 ("net/mlx5e: CT: Don't offload tuple rewrites for established tuples") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDPAlaa Hleihel
Currently, we support hardware offload only for MPLS over UDP. However, rules matching on MPLS parameters are now wrongly offloaded for regular MPLS, without actually taking the parameters into consideration when doing the offload. Fix it by rejecting such unsupported rules. Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters") Signed-off-by: Alaa Hleihel <alaa@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net/mlx5: Add back multicast stats for uplink representorHuy Nguyen
The multicast counter got removed from uplink representor due to the cited patch. Fixes: 47c97e6b10a1 ("net/mlx5e: Fix multicast counter not up-to-date in "ip -s"") Signed-off-by: Huy Nguyen <huyn@nvidia.com> Reviewed-by: Daniel Jurgens <danielj@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net: ipconfig: ic_dev can be NULL in ic_close_devsVladimir Oltean
ic_close_dev contains a generalization of the logic to not close a network interface if it's the host port for a DSA switch. This logic is disguised behind an iteration through the lowers of ic_dev in ic_close_dev. When no interface for ipconfig can be found, ic_dev is NULL, and ic_close_dev: - dereferences a NULL pointer when assigning selected_dev - would attempt to search through the lower interfaces of a NULL net_device pointer So we should protect against that case. The "lower_dev" iterator variable was shortened to "lower" in order to keep the 80 character limit. Fixes: f68cbaed67cb ("net: ipconfig: avoid use-after-free in ic_close_devs") Fixes: 46acf7bdbc72 ("Revert "net: ipv4: handle DSA enabled master network devices"") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into oneJonathan Neuschäfer
There ended up being two sections with the same title. Combine the two into one section. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Cc: Manish Chopra <manishc@marvell.com> Cc: Coiby Xu <coiby.xu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22drm/amdgpu: skip kfd suspend/resume for S0ixAlex Deucher
GFX is in gfxoff mode during s0ix so we shouldn't need to actually tear anything down and restore it. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: drop S0ix checks around CG/PG in suspendAlex Deucher
We handle it properly within the CG/PG functions directly now. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: skip CG/PG for gfx during S0ixPratik Vishwakarma
Not needed as the device is in gfxoff state so the CG/PG state is handled just like it would be for gfxoff during runtime gfxoff. This should also prevent delays on resume. Reworked from Pratik's original patch (Alex) Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
2021-03-22drm/amdgpu: update comments about s0ix suspend/resumeAlex Deucher
Provide and explanation as to why we skip GFX and PSP for S0ix. GFX goes into gfxoff, same as runtime, so no need to tear down and re-init. PSP is part of the always on state, so no need to touch it. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspendAlex Deucher
The SMU expects CGPG to be enabled when entering S0ix. with this we can re-enable SMU suspend. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: re-enable suspend phase 2 for S0ixAlex Deucher
This really needs to be done to properly tear down the device. SMC, PSP, and GFX are still problematic, need to dig deeper into what aspect of them that is problematic. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3)Alex Deucher
No functional change. v2: use correct dev v3: rework Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: clean up non-DC suspend/resume handlingAlex Deucher
Move the non-DC specific code into the DCE IP blocks similar to how we handle DC. This cleans up the common suspend and resume pathes. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: don't evict vram on APUs for suspend to ram (v4)Alex Deucher
Vram is system memory, so no need to evict. v2: use PM_EVENT messages v3: use correct dev v4: use driver flags Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: rework S3/S4/S0ix state handlingAlex Deucher
Set flags at the top level pmops callbacks to track state. This cleans up the current set of flags and properly handles S4 on S0ix capable systems. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-22drm/amdgpu: fix the hibernation suspend with s0ixPrike Liang
During system hibernation suspend still need un-gate gfx CG/PG firstly to handle HW status check before HW resource destory. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-22integrity: double check iint_cache was initializedMimi Zohar
The kernel may be built with multiple LSMs, but only a subset may be enabled on the boot command line by specifying "lsm=". Not including "integrity" on the ordered LSM list may result in a NULL deref. As reported by Dmitry Vyukov: in qemu: qemu-system-x86_64 -enable-kvm -machine q35,nvdimm -cpu max,migratable=off -smp 4 -m 4G,slots=4,maxmem=16G -hda wheezy.img -kernel arch/x86/boot/bzImage -nographic -vga std -soundhw all -usb -usbdevice tablet -bt hci -bt device:keyboard -net user,host=10.0.2.10,hostfwd=tcp::10022-:22 -net nic,model=virtio-net-pci -object memory-backend-file,id=pmem1,share=off,mem-path=/dev/zero,size=64M -device nvdimm,id=nvdimm1,memdev=pmem1 -append "console=ttyS0 root=/dev/sda earlyprintk=serial rodata=n oops=panic panic_on_warn=1 panic=86400 lsm=smack numa=fake=2 nopcid dummy_hcd.num=8" -pidfile vm_pid -m 2G -cpu host But it crashes on NULL deref in integrity_inode_get during boot: Run /sbin/init as init process BUG: kernel NULL pointer dereference, address: 000000000000001c PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc2+ #97 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-44-g88ab0c15525c-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmem_cache_alloc+0x2b/0x370 mm/slub.c:2920 Code: 57 41 56 41 55 41 54 41 89 f4 55 48 89 fd 53 48 83 ec 10 44 8b 3d d9 1f 90 0b 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 <8b> 5f 1c 4cf RSP: 0000:ffffc9000032f9d8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888017fc4f00 RCX: 0000000000000000 RDX: ffff888040220000 RSI: 0000000000000c40 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff888019263627 R10: ffffffff83937cd1 R11: 0000000000000000 R12: 0000000000000c40 R13: ffff888019263538 R14: 0000000000000000 R15: 0000000000ffffff FS: 0000000000000000(0000) GS:ffff88802d180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 000000000b48e000 CR4: 0000000000750ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: integrity_inode_get+0x47/0x260 security/integrity/iint.c:105 process_measurement+0x33d/0x17e0 security/integrity/ima/ima_main.c:237 ima_bprm_check+0xde/0x210 security/integrity/ima/ima_main.c:474 security_bprm_check+0x7d/0xa0 security/security.c:845 search_binary_handler fs/exec.c:1708 [inline] exec_binprm fs/exec.c:1761 [inline] bprm_execve fs/exec.c:1830 [inline] bprm_execve+0x764/0x19a0 fs/exec.c:1792 kernel_execve+0x370/0x460 fs/exec.c:1973 try_to_run_init_process+0x14/0x4e init/main.c:1366 kernel_init+0x11d/0x1b8 init/main.c:1477 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Modules linked in: CR2: 000000000000001c ---[ end trace 22d601a500de7d79 ]--- Since LSMs and IMA may be configured at build time, but not enabled at run time, panic the system if "integrity" was not initialized before use. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 79f7865d844c ("LSM: Introduce "lsm=" for boottime LSM selection") Cc: stable@vger.kernel.org Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-03-22Merge tag 'selinux-pr-20210322' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fixes from Paul Moore: "Three SELinux patches: - Fix a problem where a local variable is used outside its associated function. Thankfully this can only be triggered by reloading the SELinux policy, which is a restricted operation for other obvious reasons. - Fix some incorrect, and inconsistent, audit and printk messages when loading the SELinux policy. All three patches are relatively minor and have been through our testing with no failures" * tag 'selinux-pr-20210322' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinuxfs: unify policy load error reporting selinux: fix variable scope issue in live sidtab conversion selinux: don't log MAC_POLICY_LOAD record on failed policy load
2021-03-22ACPI: scan: Use unique number for instance_noAndy Shevchenko
The decrementation of acpi_device_bus_id->instance_no in acpi_device_del() is incorrect, because it may cause a duplicate instance number to be allocated next time a device with the same acpi_device_bus_id is added. Replace above mentioned approach by using IDA framework. While at it, define the instance range to be [0, 4096). Fixes: e49bd2dd5a50 ("ACPI: use PNPID:instance_no as bus_id of ACPI device") Fixes: ca9dc8d42b30 ("ACPI / scan: Fix acpi_bus_id_list bookkeeping") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-22dm: don't report "detected capacity change" on device creationMikulas Patocka
When a DM device is first created it doesn't yet have an established capacity, therefore the use of set_capacity_and_notify() should be conditional given the potential for needless pr_info "detected capacity change" noise even if capacity is 0. One could argue that the pr_info() in set_capacity_and_notify() is misplaced, but that position is not held uniformly. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: f64d9b2eacb9 ("dm: use set_capacity_and_notify") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-03-22dm table: Fix zoned model check and zone sectors checkShin'ichiro Kawasaki
Commit 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks") triggered dm table load failure when dm-zoned device is set up for zoned block devices and a regular device for cache. The commit inverted logic of two callback functions for iterate_devices: device_is_zoned_model() and device_matches_zone_sectors(). The logic of device_is_zoned_model() was inverted then all destination devices of all targets in dm table are required to have the expected zoned model. This is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices since each target has only one destination device. However, this results in failure for dm-zoned with regular cache device since that target has both regular block device and zoned block devices. As for device_matches_zone_sectors(), the commit inverted the logic to require all zoned block devices in each target have the specified zone_sectors. This check also fails for regular block device which does not have zones. To avoid the check failures, fix the zone model check and the zone sectors check. For zone model check, introduce the new feature flag DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the target has this flag, allow it to have destination devices with any zoned model. For zone sectors check, skip the check if the destination device is not a zoned block device. Also add comments and improve an error message to clarify expectations to the two checks. Fixes: 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-03-22dm verity: fix DM_VERITY_OPTS_MAX valueJeongHyeon Lee
Three optional parameters must be accepted at once in a DM verity table, e.g.: (verity_error_handling_mode) (ignore_zero_block) (check_at_most_once) Fix this to be possible by incrementing DM_VERITY_OPTS_MAX. Signed-off-by: JeongHyeon Lee <jhs2.lee@samsung.com> Fixes: 843f38d382b1 ("dm verity: add 'check_at_most_once' option to only validate hashes once") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-03-22PM: runtime: Defer suspending suppliersRafael J. Wysocki
Because the PM-runtime status of the device is not updated in __rpm_callback(), attempts to suspend the suppliers of the given device triggered by the rpm_put_suppliers() call in there may cause a supplier to be suspended completely before the status of the consumer is updated to RPM_SUSPENDED, which is confusing. To avoid that (1) modify __rpm_callback() to only decrease the PM-runtime usage counter of each supplier and (2) make rpm_suspend() try to suspend the suppliers after changing the consumer's status to RPM_SUSPENDED, in analogy with the device's parent. Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/ Fixes: 21d5c57b3726 ("PM / runtime: Use device links") Reported-by: elaine.zhang <zhangqing@rock-chips.com> Diagnosed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-22io_uring: fix provide_buffers sign extensionPavel Begunkov
io_provide_buffers_prep()'s "p->len * p->nbufs" to sign extension problems. Not a huge problem as it's only used for access_ok() and increases the checked length, but better to keep typing right. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: efe68c1ca8f49 ("io_uring: validate the full range of provided buffers for access") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/562376a39509e260d8532186a06226e56eb1f594.1616149233.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-22io_uring: don't skip file_end_write() on reissuePavel Begunkov
Don't miss to call kiocb_end_write() from __io_complete_rw() on reissue. Shouldn't be much of a problem as the function actually does some work only for ISREG, and NONBLOCK won't be reissued. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/32af9b77c5b874e1bee1a3c46396094bd969e577.1616366969.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-22io_uring: correct io_queue_async_work() tracesPavel Begunkov
Request's io-wq work is hashed in io_prep_async_link(), so as trace_io_uring_queue_async_work() looks at it should follow after prep has been done. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/709c9f872f4d2e198c7aed9c49019ca7095dd24d.1616366969.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-11 20:02:43 +0000