| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes again are devicetree fixes, but there are also
five trivial build fixes for issues I found when test building with
gcc-11 or when running 'make W=1', and some OMAP platform specific
code fixups.
Broadcom:
- One revert for a Raspberry pi interrupt controller change that
caused a regression.
TI OMAP:
- Remove unused duplicate sha2md5_fck clock node that can race with
the OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks
- Add aliases for omap4/5 mmc to put the slots back into the right
order again
- Fix typo for bionic voltage controllers that accidentally use mpu
for all instances instead of mpu, core and iva
- Fix random hangs for droid4 caused by missing fix from TI Android
kernel tree to do a dummy smc call on cpuidle wakeup path
NXP i.MX:
- Fix a system failure on imx6qdl-phytec-pfla02 board when booting
from SD, by adding missing vmmc supply for SD interfaces.
- Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2
definition.
Marvell mvebu:
- Fix storm interrupt on Turris Omnia
- Enable hardware buffer management as it should be
... and build fixes for PXA, Freescale, Marvell, OMAP1 and Keystone"
* tag 'arm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
ARM: dts: turris-omnia: fix hardware buffer management
Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"
ARM: mvebu: avoid clang -Wtautological-constant warning
ARM: pxa: mainstone: avoid -Woverride-init warning
ARM: omap1: fix building with clang IAS
soc/fsl: qbman: fix conflicting alignment attributes
ARM: keystone: fix integer overflow warning
ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0
ARM: OMAP4: PM: update ROM return address for OSWR and OFF
ARM: OMAP4: Fix PMIC voltage domains for bionic
ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"One link error fix found by the kernel test robot, one sparse warning
fix, remove a duplicate declaration and some spelling fixes"
* 'parisc-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: math-emu: Few spelling fixes in the file fpu.h
parisc: avoid a warning on u8 cast for cmpxchg on u8 pointers
parisc: parisc-agp requires SBA IOMMU driver
parisc: Remove duplicate struct task_struct declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Hans de Goede:
"A single bugfix to fix spurious wakeups from suspend caused by recent
intel-hid driver changes"
* tag 'platform-drivers-x86-v5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel-hid: Fix spurious wakeups caused by tablet-mode events during suspend
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"bd9571mwv regulator fixes for v5.12.
A set of driver specific fixes here, the main one is a fix to not try
to set unsupported voltages on this device. The other two patches
clean up the error handling and eliminate the possibility that we
could overflow the page when writing sysfs output (which AFAICT wasn't
an issue but better to be sure)"
* tag 'regulator-fix-v5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: bd9571mwv: Convert device attribute to sysfs_emit()
regulator: bd9571mwv: Fix regulator name printed on registration failure
regulator: bd9571mwv: Fix AVS and DVFS voltage range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 5.12 (part 1)
2 fixes on on turris-omnia (Armada 38x based:)
- Fix storm interrupt
- Enable hardware buffer management as it should be
Unbreak AHCI on all Marvell Armada 7k8k / CN913x platforms
* tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
ARM: dts: turris-omnia: fix hardware buffer management
Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"
Link: https://lore.kernel.org/r/87a6qgctit.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
during suspend
Some devices send (duplicate) tablet-mode events when moved around even
though the mode has not changed; and they do this even when suspended.
Change the tablet-mode event handling when priv->wakeup_mode is set to
update the switch state in case it changed and then return immediately
(without calling pm_wakeup_hard_event()) to avoid spurious wakeups.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212537
Fixes: 537b0dd4729e ("platform/x86: intel-hid: Add support for SW_TABLET_MODE")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Elia Devito <eliadevito@gmail.com>
Link: https://lore.kernel.org/r/20210404143831.25173-1-hdegoede@redhat.com
|
|
Pull fs fixes from Al Viro:
"Fairly old hostfs bug (in setups that are not used by anyone,
apparently) + fix for this cycle regression: extra dput/mntput in
LOOKUP_CACHED failure handling"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Make sure nd->path.mnt and nd->path.dentry are always valid pointers
hostfs: fix memory handling in follow_link()
|
|
Initialize them in set_nameidata() and make sure that terminate_walk() clears them
once the pointers become potentially invalid (i.e. we leave RCU mode or drop them
in non-RCU one). Currently we have "path_init() always initializes them and nobody
accesses them outside of path_init()/terminate_walk() segments", which is asking
for trouble.
With that change we would have nd->path.{mnt,dentry}
1) always valid - NULL or pointing to currently allocated objects.
2) non-NULL while we are successfully walking
3) NULL when we are not walking at all
4) contributing to refcounts whenever non-NULL outside of RCU mode.
Fixes: 6c6ec2b0a3e0 ("fs: add support for LOOKUP_CACHED")
Reported-by: syzbot+c88a7030da47945a3cc3@syzkaller.appspotmail.com
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
with some additional cleanups by Helge.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
commit b344d6a83d01 ("parisc: add support for cmpxchg on u8 pointers")
can generate a sparse warning ("cast truncates bits from constant
value"), which has been reported several times [1] [2] [3].
The original code worked as expected, but anyway, let silence such
sparse warning as what others did [4].
[1] https://lore.kernel.org/r/202104061220.nRMBwCXw-lkp@intel.com
[2] https://lore.kernel.org/r/202012291914.T5Agcn99-lkp@intel.com
[3] https://lore.kernel.org/r/202008210829.KVwn7Xeh%25lkp@intel.com
[4] https://lore.kernel.org/r/20210315131512.133720-2-jacopo+renesas@jmondi.org
Cc: Liam Beguin <liambeguin@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add a dependency to the SBA IOMMU driver to avoid:
ERROR: modpost: "sba_list" [drivers/char/agp/parisc-agp.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
struct task_struct is declared twice. One has been declared
at 154th line. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two workqueue fixes.
One is around debugobj and poses no risk. The other is to prevent the
stall watchdog from firing spuriously in certain conditions. Not as
trivial as debugobj change but is still fairly low risk"
* 'for-5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue/watchdog: Make unbound workqueues aware of touch_softlockup_watchdog() 84;0;0c84;0;0c There are two workqueue-specific watchdog timestamps:
workqueue: Move the position of debug_work_activate() in __queue_work()
|
|
|
|
For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:
1. Open nosy device for the first time and call ioctl with command
NOSY_IOC_START, then a new client A will be malloced and added to
doubly linked list.
2. Open nosy device for the second time and call ioctl with command
NOSY_IOC_START, then a new client B will be malloced and added to
doubly linked list.
3. Call ioctl with command NOSY_IOC_START for client A, then client A
will be readded to the doubly linked list. Now the doubly linked
list is messed up.
4. Close the first nosy device and nosy_release will be called. In
nosy_release, client A will be unlinked and freed.
5. Close the second nosy device, and client A will be referenced,
resulting in UAF.
The root cause of this bug is that the element in the doubly linked list
is reentered into the list.
Fix this bug by adding a check before inserting a client. If a client
is already in the linked list, don't insert it.
The following KASAN report reveals it:
BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
Write of size 8 at addr ffff888102ad7360 by task poc
CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
nosy_release+0x1ea/0x210
__fput+0x1e2/0x840
task_work_run+0xe8/0x180
exit_to_user_mode_prepare+0x114/0x120
syscall_exit_to_user_mode+0x1d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 337:
nosy_open+0x154/0x4d0
misc_open+0x2ec/0x410
chrdev_open+0x20d/0x5a0
do_dentry_open+0x40f/0xe80
path_openat+0x1cf9/0x37b0
do_filp_open+0x16d/0x390
do_sys_openat2+0x11d/0x360
__x64_sys_open+0xfd/0x1a0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 337:
kfree+0x8f/0x210
nosy_release+0x158/0x210
__fput+0x1e2/0x840
task_work_run+0xe8/0x180
exit_to_user_mode_prepare+0x114/0x120
syscall_exit_to_user_mode+0x1d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380)
[ Modified to use 'list_empty()' inside proper lock - Linus ]
Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/
Reported-and-tested-by: 马哲宇 (Zheyu Ma) <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
84;0;0c84;0;0c
There are two workqueue-specific watchdog timestamps:
+ @wq_watchdog_touched_cpu (per-CPU) updated by
touch_softlockup_watchdog()
+ @wq_watchdog_touched (global) updated by
touch_all_softlockup_watchdogs()
watchdog_timer_fn() checks only the global @wq_watchdog_touched for
unbound workqueues. As a result, unbound workqueues are not aware
of touch_softlockup_watchdog(). The watchdog might report a stall
even when the unbound workqueues are blocked by a known slow code.
Solution:
touch_softlockup_watchdog() must touch also the global @wq_watchdog_touched
timestamp.
The global timestamp can no longer be used for bound workqueues because
it is now updated from all CPUs. Instead, bound workqueues have to check
only @wq_watchdog_touched_cpu and these timestamps have to be updated for
all CPUs in touch_all_softlockup_watchdogs().
Beware:
The change might cause the opposite problem. An unbound workqueue
might get blocked on CPU A because of a real softlockup. The workqueue
watchdog would miss it when the timestamp got touched on CPU B.
It is acceptable because softlockups are detected by softlockup
watchdog. The workqueue watchdog is there to detect stalls where
a work never finishes, for example, because of dependencies of works
queued into the same workqueue.
V3:
- Modify the commit message clearly according to Petr's suggestion.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The debug_work_activate() is called on the premise that
the work can be inserted, because if wq be in WQ_DRAINING
status, insert work may be failed.
Fixes: e41e704bc4f4 ("workqueue: improve destroy_workqueue() debuggability")
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull OpenRISC fix from Stafford Horne:
"Fix duplicate header include in Litex SOC driver"
* tag 'for-linus' of git://github.com/openrisc/linux:
soc: litex: Remove duplicated header file inclusion
|
|
POull io_uring fix from Jens Axboe:
"Just fixing a silly braino in a previous patch, where we'd end up
failing to compile if CONFIG_BLOCK isn't enabled.
Not that a lot of people do that, but kernel bot spotted it and it's
probably prudent to just flush this out now before -rc6.
Sorry about that, none of my test compile configs have !CONFIG_BLOCK"
* tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block:
io_uring: fix !CONFIG_BLOCK compilation failure
|
|
The header file <linux/errno.h> is already included above and can be
removed here.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Two more gfs2 fixes"
* tag 'gfs2-v5.12-rc2-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: report "already frozen/thawed" errors
gfs2: Flag a withdraw if init_threads() fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes for 5.12:
- fix a stack tracing regression related to "const register asm"
variables, which have unexpected behavior.
- ensure the value to be written by put_user() is evaluated before
enabling access to userspace memory..
- align the exception vector table correctly, so we don't rely on the
firmware's handling of unaligned accesses.
- build fix to make NUMA depend on MMU, which triggered on some
randconfigs"
* tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Make NUMA depend on MMU
riscv: remove unneeded semicolon
riscv,entry: fix misaligned base for excp_vect_table
riscv: evaluate put_user() arg before enabling user access
riscv: Drop const annotation for sp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix a bug on pseries where spurious wakeups from H_PROD would prevent
partition migration from succeeding.
Fix oopses seen in pcpu_alloc(), caused by parallel faults of the
percpu mapping causing us to corrupt the protection key used for the
mapping, and cause a fatal key fault.
Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, and Nathan Lynch"
* tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECT
powerpc/pseries/mobility: handle premature return from H_JOIN
powerpc/pseries/mobility: use struct for shared state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
"One fix from Lu Yunlong for a double free in hvfb_probe"
* tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
video: hyperv_fb: Fix a double free in hvfb_probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a reported problem with differed
probing. It has been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: clear deferred probe reason on probe retry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small driver char/misc changes for 5.12-rc6.
Nothing major here, a few fixes for reported issues:
- interconnect fixes for problems found
- fbcon syzbot-found fix
- extcon fixes
- firmware stratix10 bugfix
- MAINTAINERS file update.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
drivers: video: fbcon: fix NULL dereference in fbcon_cursor()
mei: allow map and unmap of client dma buffer only for disconnected client
MAINTAINERS: Add linux-phy list and patchwork
interconnect: Fix kerneldoc warning
firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
extcon: Fix error handling in extcon_dev_register
extcon: Add stubs for extcon_register_notifier_all() functions
interconnect: core: fix error return code of icc_link_destroy()
interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two rtl8192e staging driver fixes for reported problems.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8192e: Change state information from u16 to u8
staging: rtl8192e: Fix incorrect source in memcpy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"Here is a single serial driver fix for 5.12-rc6. Is is a revert of a
change that showed up in 5.9 that has been reported to cause problems.
It has been in linux-next for a while with no reported issues"
* tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
soc: qcom-geni-se: Cleanup the code to remove proxy votes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few small USB driver fixes for 5.12-rc6 to resolve reported
problems.
They include:
- a number of cdc-acm fixes for reported problems. It seems more
people are using this driver lately...
- dwc3 driver fixes for reported problems, and fixes for the fixes :)
- dwc2 driver fixes for reported issues.
- musb driver fix.
- new USB quirk additions.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (23 commits)
usb: dwc2: Prevent core suspend when port connection flag is 0
usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.
usb: musb: Fix suspend with devices connected for a64
usb: xhci-mtk: fix broken streams issue on 0.96 xHCI
usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable
usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()
USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem
USB: cdc-acm: do not log successful probe on later errors
USB: cdc-acm: always claim data interface
USB: cdc-acm: use negation for NULL checks
USB: cdc-acm: clean up probe error labels
USB: cdc-acm: drop redundant driver-data reset
USB: cdc-acm: drop redundant driver-data assignment
USB: cdc-acm: fix use-after-free after probe failure
USB: cdc-acm: fix double free on probe failure
USB: cdc-acm: downgrade message to debug
USB: cdc-acm: untangle a circular dependency between callback and softint
cdc-acm: fix BREAK rx code path adding necessary calls
usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference
usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix to iscsi for a rare race condition which can cause a
kernel panic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix race condition between login and sync thread
|
|
kernel test robot correctly pinpoints a compilation failure if
CONFIG_BLOCK isn't set:
fs/io_uring.c: In function '__io_complete_rw':
>> fs/io_uring.c:2509:48: error: implicit declaration of function 'io_rw_should_reissue'; did you mean 'io_rw_reissue'? [-Werror=implicit-function-declaration]
2509 | if ((res == -EAGAIN || res == -EOPNOTSUPP) && io_rw_should_reissue(req)) {
| ^~~~~~~~~~~~~~~~~~~~
| io_rw_reissue
cc1: some warnings being treated as errors
Ensure that we have a stub declaration of io_rw_should_reissue() for
!CONFIG_BLOCK.
Fixes: 230d50d448ac ("io_uring: move reissue into regular IO path")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- Remove comment that never came to fruition in 22 years of development
(Christoph)
- Remove unused request flag (Christoph)
- Fix for null_blk fake timeout handling (Damien)
- Fix for IOCB_NOWAIT being ignored for O_DIRECT on raw bdevs (Pavel)
- Error propagation fix for multiple split bios (Yufen)
* tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
block: remove the unused RQF_ALLOCED flag
block: update a few comments in uapi/linux/blkpg.h
block: don't ignore REQ_NOWAIT for direct IO
null_blk: fix command timeout completion handling
block: only update parent bi_status when bio fail
|
|
Pull io_uring fixes from Jens Axboe:
"Nothing really major in here, and finally nothing really related to
signals. A few minor fixups related to the threading changes, and some
general fixes, that's it.
There's the pending gdb-get-confused-about-arch, but that's more of a
cosmetic issue, nothing that hinder use of it. And given that other
archs will likely be affected by that oddity too, better to postpone
any changes there until 5.13 imho"
* tag 'io_uring-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
io_uring: move reissue into regular IO path
io_uring: fix EIOCBQUEUED iter revert
io_uring/io-wq: protect against sprintf overflow
io_uring: don't mark S_ISBLK async work as unbounded
io_uring: drop sqd lock before handling signals for SQPOLL
io_uring: handle setup-failed ctx in kill_timeouts
io_uring: always go for cancellation spin on exec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI tables management issue, an issue related to the
ACPI enumeration of devices and CPU wakeup in the ACPI processor
driver.
Specifics:
- Ensure that the memory occupied by ACPI tables on x86 will always
be reserved to prevent it from being allocated for other purposes
which was possible in some cases (Rafael Wysocki).
- Fix the ACPI device enumeration code to prevent it from attempting
to evaluate the _STA control method for devices with unmet
dependencies which is likely to fail (Hans de Goede).
- Fix the handling of CPU0 wakeup in the ACPI processor driver to
prevent CPU0 online failures from occurring (Vitaly Kuznetsov)"
* tag 'acpi-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()
ACPI: scan: Fix _STA getting called on devices with unmet dependencies
ACPI: tables: x86: Reserve memory occupied by ACPI tables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a race condition and an ordering issue related to using
device links in the runtime PM framework and two kerneldoc comments in
cpufreq.
Specifics:
- Fix race condition related to the handling of supplier devices
during consumer device probe and fix the order of decrementation of
two related reference counters in the runtime PM core code handling
supplier devices (Adrian Hunter).
- Fix kerneldoc comments in cpufreq that have not been updated along
with the functions documented by them (Geert Uytterhoeven)"
* tag 'pm-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix race getting/putting suppliers at probe
PM: runtime: Fix ordering in pm_runtime_get_suppliers()
cpufreq: Fix scaling_{available,boost}_frequencies_show() comments
|
|
Use the `marvell,reg-init` DT property to configure the LED[2]/INTn pin
of the Marvell 88E1514 ethernet PHY on Turris Omnia into interrupt mode.
Without this the pin is by default in LED[2] mode, and the Marvell PHY
driver configures LED[2] into "On - Link, Blink - Activity" mode.
This fixes the issue where the pca9538 GPIO/interrupt controller (which
can't mask interrupts in HW) received too many interrupts and after a
time started ignoring the interrupt with error message:
IRQ 71: nobody cared
There is a work in progress to have the Marvell PHY driver support
parsing PHY LED nodes from OF and registering the LEDs as Linux LED
class devices. Once this is done the PHY driver can also automatically
set the pin into INTn mode if it does not find LED[2] in OF.
Until then, though, we fix this via `marvell,reg-init` DT property.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: <stable@vger.kernel.org>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Hardware buffer management has never worked on the Turris Omnia, as the
required MBus window hadn't been reserved. Fix thusly.
Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management")
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The driver part of this support was not merged which leads to break
AHCI on all Marvell Armada 7k8k / CN913x platforms as it was reported
by Marcin Wojtas.
So for now let's remove it in order to fix the issue waiting for the
driver part really be merged.
This reverts commit 53e950d597e3578da84238b86424bfcc9e101d87.
Fixes: 53e950d597e3 ("arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The big top of the file comment talk about grand plans that never
happened, so remove them to not confuse the readers. Also mark the
devname and volname fields as ignored as they were never used by the
kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix stack trace entry size to stop showing garbage
The macro that creates both the structure and the format displayed to
user space for the stack trace event was changed a while ago to fix
the parsing by user space tooling. But this change also modified the
structure used to store the stack trace event. It changed the caller
array field from [0] to [8].
Even though the size in the ring buffer is dynamic and can be
something other than 8 (user space knows how to handle this), the 8
extra words was not accounted for when reserving the event on the ring
buffer, and added 8 more entries, due to the calculation of
"sizeof(*entry) + nr_entries * sizeof(long)", as the sizeof(*entry)
now contains 8 entries.
The size of the caller field needs to be subtracted from the size of
the entry to create the correct allocation size"
* tag 'trace-v5.12-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix stack trace event size
|
|
It's non-obvious how retry is done for block backed files, when it happens
off the kiocb done path. It also makes it tricky to deal with the iov_iter
handling.
Just mark the req as needing a reissue, and handling it from the
submission path instead. This makes it directly obvious that we're not
re-importing the iovec from userspace past the submit point, and it means
that we can just reuse our usual -EAGAIN retry path from the read/write
handling.
At some point in the future, we'll gain the ability to always reliably
return -EAGAIN through the stack. A previous attempt on the block side
didn't pan out and got reverted, hence the need to check for this
information out-of-band right now.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* acpi-tables:
ACPI: tables: x86: Reserve memory occupied by ACPI tables
* acpi-scan:
ACPI: scan: Fix _STA getting called on devices with unmet dependencies
|
|
* pm-cpufreq:
cpufreq: Fix scaling_{available,boost}_frequencies_show() comments
|
|
If IOCB_NOWAIT is set on submission, then that needs to get propagated to
REQ_NOWAIT on the block side. Otherwise we completely lose this
information, and any issuer of IOCB_NOWAIT IO will potentially end up
blocking on eg request allocation on the storage side.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
NUMA is useless when NOMMU, and it leads some build error,
make it depend on MMU.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Eliminate the following coccicheck warning:
./arch/riscv/mm/kasan_init.c:219:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
In RV64, the size of each entry in excp_vect_table is 8 bytes. If the
base of the table is not 8-byte aligned, loading an entry in the table
will raise a misaligned exception. Although such exception will be
handled by opensbi/bbl, this still causes performance degradation.
Signed-off-by: Zihao Yu <yuzihao@ict.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The <asm/uaccess.h> header has a problem with put_user(a, ptr) if
the 'a' is not a simple variable, such as a function. This can lead
to the compiler producing code as so:
1: enable_user_access()
2: evaluate 'a' into register 'r'
3: put 'r' to 'ptr'
4: disable_user_acess()
The issue is that 'a' is now being evaluated with the user memory
protections disabled. So we try and force the evaulation by assigning
'x' to __val at the start, and hoping the compiler barriers in
enable_user_access() do the job of ordering step 2 before step 1.
This has shown up in a bug where 'a' sleeps and thus schedules out
and loses the SR_SUM flag. This isn't sufficient to fully fix, but
should reduce the window of opportunity. The first instance of this
we found is in scheudle_tail() where the code does:
$ less -N kernel/sched/core.c
4263 if (current->set_child_tid)
4264 put_user(task_pid_vnr(current), current->set_child_tid);
Here, the task_pid_vnr(current) is called within the block that has
enabled the user memory access. This can be made worse with KASAN
which makes task_pid_vnr() a rather large call with plenty of
opportunity to sleep.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reported-by: syzbot+e74b94fe601ab9552d69@syzkaller.appspotmail.com
Suggested-by: Arnd Bergman <arnd@arndb.de>
--
Changes since v1:
- fixed formatting and updated the patch description with more info
Changes since v2:
- fixed commenting on __put_user() (schwab@linux-m68k.org)
Change since v3:
- fixed RFC in patch title. Should be ready to merge.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The const annotation should not be used for 'sp', or it will
become read only and lead to bad stack output.
Fixes: dec822771b01 ("riscv: stacktrace: Move register keyword to beginning of declaration")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
