summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-11tcp: Avoid TCP syncookie rejected by SO_REUSEPORT socketMartin KaFai Lau
Although the actual cookie check "__cookie_v[46]_check()" does not involve sk specific info, it checks whether the sk has recent synq overflow event in "tcp_synq_no_recent_overflow()". The tcp_sk(sk)->rx_opt.ts_recent_stamp is updated every second when it has sent out a syncookie (through "tcp_synq_overflow()"). The above per sk "recent synq overflow event timestamp" works well for non SO_REUSEPORT use case. However, it may cause random connection request reject/discard when SO_REUSEPORT is used with syncookie because it fails the "tcp_synq_no_recent_overflow()" test. When SO_REUSEPORT is used, it usually has multiple listening socks serving TCP connection requests destinated to the same local IP:PORT. There are cases that the TCP-ACK-COOKIE may not be received by the same sk that sent out the syncookie. For example, if reuse->socks[] began with {sk0, sk1}, 1) sk1 sent out syncookies and tcp_sk(sk1)->rx_opt.ts_recent_stamp was updated. 2) the reuse->socks[] became {sk1, sk2} later. e.g. sk0 was first closed and then sk2 was added. Here, sk2 does not have ts_recent_stamp set. There are other ordering that will trigger the similar situation below but the idea is the same. 3) When the TCP-ACK-COOKIE comes back, sk2 was selected. "tcp_synq_no_recent_overflow(sk2)" returns true. In this case, all syncookies sent by sk1 will be handled (and rejected) by sk2 while sk1 is still alive. The userspace may create and remove listening SO_REUSEPORT sockets as it sees fit. E.g. Adding new thread (and SO_REUSEPORT sock) to handle incoming requests, old process stopping and new process starting...etc. With or without SO_ATTACH_REUSEPORT_[CB]BPF, the sockets leaving and joining a reuseport group makes picking the same sk to check the syncookie very difficult (if not impossible). The later patches will allow bpf prog more flexibility in deciding where a sk should be located in a bpf map and selecting a particular SO_REUSEPORT sock as it sees fit. e.g. Without closing any sock, replace the whole bpf reuseport_array in one map_update() by using map-in-map. Getting the syncookie check working smoothly across socks in the same "reuse->socks[]" is important. A partial solution is to set the newly added sk's ts_recent_stamp to the max ts_recent_stamp of a reuseport group but that will require to iterate through reuse->socks[] OR pessimistically set it to "now - TCP_SYNCOOKIE_VALID" when a sk is joining a reuseport group. However, neither of them will solve the existing sk getting moved around the reuse->socks[] and that sk may not have ts_recent_stamp updated, unlikely under continuous synflood but not impossible. This patch opts to treat the reuseport group as a whole when considering the last synq overflow timestamp since they are serving the same IP:PORT from the userspace (and BPF program) perspective. "synq_overflow_ts" is added to "struct sock_reuseport". The tcp_synq_overflow() and tcp_synq_no_recent_overflow() will update/check reuse->synq_overflow_ts if the sk is in a reuseport group. Similar to the reuseport decision in __inet_lookup_listener(), both sk->sk_reuseport and sk->sk_reuseport_cb are tested for SO_REUSEPORT usage. Update on "synq_overflow_ts" happens at roughly once every second. A synflood test was done with a 16 rx-queues and 16 reuseport sockets. No meaningful performance change is observed. Before and after the change is ~9Mpps in IPv4. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-10smb3: create smb3 equivalent alias for cifs pseudo-xattrsSteve French
We really, really don't want to be encouraging people to use cifs (the dialect) since it is insecure, so to avoid confusion we want to move them to names which include 'smb3' instead of 'cifs' - so this simply creates an alias for the pseudo-xattrs e.g. can now do: getfattr -n user.smb3.creationtime /mnt1/file and getfattr -n user.smb3.dosattrib /mnt1/file and getfattr -n system.smb3_acl /mnt1/file instead of forcing you to use the string 'cifs' in these (e.g. getfattr -n system.cifs_acl /mnt1/file) Signed-off-by: Steve French <stfrench@microsoft.com>
2018-08-10f2fs: fix to reset i_gc_failures correctlyChao Yu
Let's reset i_gc_failures to zero when we unset pinned state for file. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-10f2fs: fix invalid memory accessChao Yu
syzbot found the following crash on: HEAD commit: d9bd94c0bcaa Add linux-next specific files for 20180801 git tree: linux-next console output: https://syzkaller.appspot.com/x/log.txt?x=1001189c400000 kernel config: https://syzkaller.appspot.com/x/.config?x=cc8964ea4d04518c dashboard link: https://syzkaller.appspot.com/bug?extid=c966a82db0b14aa37e81 compiler: gcc (GCC) 8.0.1 20180413 (experimental) Unfortunately, I don't have any reproducer for this crash yet. IMPORTANT: if you fix the bug, please add the following tag to the commit: Reported-by: syzbot+c966a82db0b14aa37e81@syzkaller.appspotmail.com loop7: rw=12288, want=8200, limit=20 netlink: 65342 bytes leftover after parsing attributes in process `syz-executor4'. openvswitch: netlink: Message has 8 unknown bytes. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 1 PID: 7615 Comm: syz-executor7 Not tainted 4.18.0-rc7-next-20180801+ #29 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:188 [inline] RIP: 0010:compound_head include/linux/page-flags.h:142 [inline] RIP: 0010:PageLocked include/linux/page-flags.h:272 [inline] RIP: 0010:f2fs_put_page fs/f2fs/f2fs.h:2011 [inline] RIP: 0010:validate_checkpoint+0x66d/0xec0 fs/f2fs/checkpoint.c:835 Code: e8 58 05 7f fe 4c 8d 6b 80 4d 8d 74 24 08 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 c6 04 02 00 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 f4 06 00 00 4c 89 ea 4d 8b 7c 24 08 48 b8 00 00 RSP: 0018:ffff8801937cebe8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8801937cef30 RCX: ffffc90006035000 RDX: 0000000000000000 RSI: ffffffff82fd9658 RDI: 0000000000000005 RBP: ffff8801937cef58 R08: ffff8801ab254700 R09: fffff94000d9e026 R10: fffff94000d9e026 R11: ffffea0006cf0137 R12: fffffffffffffffb R13: ffff8801937ceeb0 R14: 0000000000000003 R15: ffff880193419b40 FS: 00007f36a61d5700(0000) GS:ffff8801db100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc04ff93000 CR3: 00000001d0562000 CR4: 00000000001426e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: f2fs_get_valid_checkpoint+0x436/0x1ec0 fs/f2fs/checkpoint.c:860 f2fs_fill_super+0x2d42/0x8110 fs/f2fs/super.c:2883 mount_bdev+0x314/0x3e0 fs/super.c:1344 f2fs_mount+0x3c/0x50 fs/f2fs/super.c:3133 legacy_get_tree+0x131/0x460 fs/fs_context.c:729 vfs_get_tree+0x1cb/0x5c0 fs/super.c:1743 do_new_mount fs/namespace.c:2603 [inline] do_mount+0x6f2/0x1e20 fs/namespace.c:2927 ksys_mount+0x12d/0x140 fs/namespace.c:3143 __do_sys_mount fs/namespace.c:3157 [inline] __se_sys_mount fs/namespace.c:3154 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3154 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45943a Code: b8 a6 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 bd 8a fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 9a 8a fb ff c3 66 0f 1f 84 00 00 00 00 00 RSP: 002b:00007f36a61d4a88 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f36a61d4b30 RCX: 000000000045943a RDX: 00007f36a61d4ad0 RSI: 0000000020000100 RDI: 00007f36a61d4af0 RBP: 0000000020000100 R08: 00007f36a61d4b30 R09: 00007f36a61d4ad0 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000013 R13: 0000000000000000 R14: 00000000004c8ea0 R15: 0000000000000000 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace bd8550c129352286 ]--- RIP: 0010:__read_once_size include/linux/compiler.h:188 [inline] RIP: 0010:compound_head include/linux/page-flags.h:142 [inline] RIP: 0010:PageLocked include/linux/page-flags.h:272 [inline] RIP: 0010:f2fs_put_page fs/f2fs/f2fs.h:2011 [inline] RIP: 0010:validate_checkpoint+0x66d/0xec0 fs/f2fs/checkpoint.c:835 Code: e8 58 05 7f fe 4c 8d 6b 80 4d 8d 74 24 08 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 c6 04 02 00 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 f4 06 00 00 4c 89 ea 4d 8b 7c 24 08 48 b8 00 00 RSP: 0018:ffff8801937cebe8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8801937cef30 RCX: ffffc90006035000 RDX: 0000000000000000 RSI: ffffffff82fd9658 RDI: 0000000000000005 netlink: 65342 bytes leftover after parsing attributes in process `syz-executor4'. RBP: ffff8801937cef58 R08: ffff8801ab254700 R09: fffff94000d9e026 openvswitch: netlink: Message has 8 unknown bytes. R10: fffff94000d9e026 R11: ffffea0006cf0137 R12: fffffffffffffffb R13: ffff8801937ceeb0 R14: 0000000000000003 R15: ffff880193419b40 FS: 00007f36a61d5700(0000) GS:ffff8801db100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc04ff93000 CR3: 00000001d0562000 CR4: 00000000001426e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 In validate_checkpoint(), if we failed to call get_checkpoint_version(), we will pass returned invalid page pointer into f2fs_put_page, cause accessing invalid memory, this patch tries to handle error path correctly to fix this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-10f2fs: fix to avoid broken of dnode block listChao Yu
f2fs recovery flow is relying on dnode block link list, it means fsynced file recovery depends on previous dnode's persistence in the list, so during fsync() we should wait on all regular inode's dnode writebacked before issuing flush. By this way, we can avoid dnode block list being broken by out-of-order IO submission due to IO scheduler or driver. Sheng Yong helps to do the test with this patch: Target:/data (f2fs, -) 64MB / 32768KB / 4KB / 8 1 / PERSIST / Index Base: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08 2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7 3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48 Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333 After: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 798.81 202.5 41143 40613.87 602.71 838.08 913.83 2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27 3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91 Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333 Patched/Original: 0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189 It looks like atomic write will suffer performance regression. I suspect that the criminal is that we forcing to wait all dnode being in storage cache before we issue PREFLUSH+FUA. BTW, will commit ("f2fs: don't need to wait for node writes for atomic write") cause the problem: we will lose data of last transaction after SPO, even if atomic write return no error: - atomic_open(); - write() P1, P2, P3; - atomic_commit(); - writeback data: P1, P2, P3; - writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing last transaction. - preflush + fua; - power-cut If we don't wait dnode writeback for atomic_write: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85 2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77 3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92 Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18 Patched/Original: 0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294 SQLite's performance recovers. Jaegeuk: "Practically, I don't see db corruption becase of this. We can excuse to lose the last transaction." Finally, we decide to keep original implementation of atomic write interface sematics that we don't wait all dnode writeback before preflush+fua submission. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-10f2fs: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-10f2fs: fix to do sanity check with cp_pack_start_sumChao Yu
After fuzzing, cp_pack_start_sum could be corrupted, so current log's summary info should be wrong due to loading incorrect summary block. Then, if segment's type in current log is exceeded NR_CURSEG_TYPE, it can lead accessing invalid dirty_i->dirty_segmap bitmap finally. Add sanity check for cp_pack_start_sum to fix this issue. https://bugzilla.kernel.org/show_bug.cgi?id=200419 - Reproduce - Kernel message (f2fs-dev w/ KASAN) [ 3117.578432] F2FS-fs (loop0): Invalid log blocks per segment (8) [ 3117.578445] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 3117.581364] F2FS-fs (loop0): invalid crc_offset: 30716 [ 3117.583564] WARNING: CPU: 1 PID: 1225 at fs/f2fs/checkpoint.c:90 __get_meta_page+0x448/0x4b0 [ 3117.583570] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.584014] CPU: 1 PID: 1225 Comm: mount Not tainted 4.17.0+ #1 [ 3117.584017] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.584022] RIP: 0010:__get_meta_page+0x448/0x4b0 [ 3117.584023] Code: 00 49 8d bc 24 84 00 00 00 e8 74 54 da ff 41 83 8c 24 84 00 00 00 08 4c 89 f6 4c 89 ef e8 c0 d9 95 00 48 89 ef e8 18 e3 00 00 <0f> 0b f0 80 4d 48 04 e9 0f fe ff ff 0f 0b 48 89 c7 48 89 04 24 e8 [ 3117.584072] RSP: 0018:ffff88018eb678c0 EFLAGS: 00010286 [ 3117.584082] RAX: ffff88018f0a6a78 RBX: ffffea0007a46600 RCX: ffffffff9314d1b2 [ 3117.584085] RDX: ffffffff00000001 RSI: 0000000000000000 RDI: ffff88018f0a6a98 [ 3117.584087] RBP: ffff88018ebe9980 R08: 0000000000000002 R09: 0000000000000001 [ 3117.584090] R10: 0000000000000001 R11: ffffed00326e4450 R12: ffff880193722200 [ 3117.584092] R13: ffff88018ebe9afc R14: 0000000000000206 R15: ffff88018eb67900 [ 3117.584096] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.584098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.584101] CR2: 00000000016f21b8 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.584112] Call Trace: [ 3117.584121] ? f2fs_set_meta_page_dirty+0x150/0x150 [ 3117.584127] ? f2fs_build_segment_manager+0xbf9/0x3190 [ 3117.584133] ? f2fs_npages_for_summary_flush+0x75/0x120 [ 3117.584145] f2fs_build_segment_manager+0xda8/0x3190 [ 3117.584151] ? f2fs_get_valid_checkpoint+0x298/0xa00 [ 3117.584156] ? f2fs_flush_sit_entries+0x10e0/0x10e0 [ 3117.584184] ? map_id_range_down+0x17c/0x1b0 [ 3117.584188] ? __put_user_ns+0x30/0x30 [ 3117.584206] ? find_next_bit+0x53/0x90 [ 3117.584237] ? cpumask_next+0x16/0x20 [ 3117.584249] f2fs_fill_super+0x1948/0x2b40 [ 3117.584258] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584279] ? sget_userns+0x65e/0x690 [ 3117.584296] ? set_blocksize+0x88/0x130 [ 3117.584302] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584305] mount_bdev+0x1c0/0x200 [ 3117.584310] mount_fs+0x5c/0x190 [ 3117.584320] vfs_kern_mount+0x64/0x190 [ 3117.584330] do_mount+0x2e4/0x1450 [ 3117.584343] ? lockref_put_return+0x130/0x130 [ 3117.584347] ? copy_mount_string+0x20/0x20 [ 3117.584357] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.584362] ? kasan_kmalloc+0xa6/0xd0 [ 3117.584373] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.584377] ? __kmalloc_track_caller+0x196/0x210 [ 3117.584383] ? _copy_from_user+0x61/0x90 [ 3117.584396] ? memdup_user+0x3e/0x60 [ 3117.584401] ksys_mount+0x7e/0xd0 [ 3117.584405] __x64_sys_mount+0x62/0x70 [ 3117.584427] do_syscall_64+0x73/0x160 [ 3117.584440] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.584455] RIP: 0033:0x7f5693f14b9a [ 3117.584456] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.584505] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.584510] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.584512] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.584514] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.584516] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.584519] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.584523] ---[ end trace a8e0d899985faf31 ]--- [ 3117.685663] F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. [ 3117.685673] F2FS-fs (loop0): recover_data: ino = 2 (i_size: recover) recovered = 1, err = 0 [ 3117.685707] ================================================================== [ 3117.685955] BUG: KASAN: slab-out-of-bounds in __remove_dirty_segment+0xdd/0x1e0 [ 3117.686175] Read of size 8 at addr ffff88018f0a63d0 by task mount/1225 [ 3117.686477] CPU: 0 PID: 1225 Comm: mount Tainted: G W 4.17.0+ #1 [ 3117.686481] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.686483] Call Trace: [ 3117.686494] dump_stack+0x71/0xab [ 3117.686512] print_address_description+0x6b/0x290 [ 3117.686517] kasan_report+0x28e/0x390 [ 3117.686522] ? __remove_dirty_segment+0xdd/0x1e0 [ 3117.686527] __remove_dirty_segment+0xdd/0x1e0 [ 3117.686532] locate_dirty_segment+0x189/0x190 [ 3117.686538] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.686543] recover_data+0x703/0x2c20 [ 3117.686547] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.686553] ? ksys_mount+0x7e/0xd0 [ 3117.686564] ? policy_nodemask+0x1a/0x90 [ 3117.686567] ? policy_node+0x56/0x70 [ 3117.686571] ? add_fsync_inode+0xf0/0xf0 [ 3117.686592] ? blk_finish_plug+0x44/0x60 [ 3117.686597] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.686602] ? find_inode_fast+0xac/0xc0 [ 3117.686606] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.686618] ? __radix_tree_lookup+0x150/0x150 [ 3117.686633] ? dqget+0x670/0x670 [ 3117.686648] ? pagecache_get_page+0x29/0x410 [ 3117.686656] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.686660] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.686664] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.686670] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.686674] ? rb_insert_color+0x323/0x3d0 [ 3117.686678] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.686683] ? proc_register+0x153/0x1d0 [ 3117.686686] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.686695] ? f2fs_attr_store+0x50/0x50 [ 3117.686700] ? proc_create_single_data+0x52/0x60 [ 3117.686707] f2fs_fill_super+0x1d06/0x2b40 [ 3117.686728] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686735] ? sget_userns+0x65e/0x690 [ 3117.686740] ? set_blocksize+0x88/0x130 [ 3117.686745] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686748] mount_bdev+0x1c0/0x200 [ 3117.686753] mount_fs+0x5c/0x190 [ 3117.686758] vfs_kern_mount+0x64/0x190 [ 3117.686762] do_mount+0x2e4/0x1450 [ 3117.686769] ? lockref_put_return+0x130/0x130 [ 3117.686773] ? copy_mount_string+0x20/0x20 [ 3117.686777] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.686780] ? kasan_kmalloc+0xa6/0xd0 [ 3117.686786] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.686790] ? __kmalloc_track_caller+0x196/0x210 [ 3117.686795] ? _copy_from_user+0x61/0x90 [ 3117.686801] ? memdup_user+0x3e/0x60 [ 3117.686804] ksys_mount+0x7e/0xd0 [ 3117.686809] __x64_sys_mount+0x62/0x70 [ 3117.686816] do_syscall_64+0x73/0x160 [ 3117.686824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.686829] RIP: 0033:0x7f5693f14b9a [ 3117.686830] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.686887] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.686892] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.686894] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.686896] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.686899] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.686901] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.687005] Allocated by task 1225: [ 3117.687152] kasan_kmalloc+0xa6/0xd0 [ 3117.687157] kmem_cache_alloc_trace+0xfd/0x200 [ 3117.687161] f2fs_build_segment_manager+0x2d09/0x3190 [ 3117.687165] f2fs_fill_super+0x1948/0x2b40 [ 3117.687168] mount_bdev+0x1c0/0x200 [ 3117.687171] mount_fs+0x5c/0x190 [ 3117.687174] vfs_kern_mount+0x64/0x190 [ 3117.687177] do_mount+0x2e4/0x1450 [ 3117.687180] ksys_mount+0x7e/0xd0 [ 3117.687182] __x64_sys_mount+0x62/0x70 [ 3117.687186] do_syscall_64+0x73/0x160 [ 3117.687190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.687285] Freed by task 19: [ 3117.687412] __kasan_slab_free+0x137/0x190 [ 3117.687416] kfree+0x8b/0x1b0 [ 3117.687460] ttm_bo_man_put_node+0x61/0x80 [ttm] [ 3117.687476] ttm_bo_cleanup_refs+0x15f/0x250 [ttm] [ 3117.687492] ttm_bo_delayed_delete+0x2f0/0x300 [ttm] [ 3117.687507] ttm_bo_delayed_workqueue+0x17/0x50 [ttm] [ 3117.687528] process_one_work+0x2f9/0x740 [ 3117.687531] worker_thread+0x78/0x6b0 [ 3117.687541] kthread+0x177/0x1c0 [ 3117.687545] ret_from_fork+0x35/0x40 [ 3117.687638] The buggy address belongs to the object at ffff88018f0a6300 which belongs to the cache kmalloc-192 of size 192 [ 3117.688014] The buggy address is located 16 bytes to the right of 192-byte region [ffff88018f0a6300, ffff88018f0a63c0) [ 3117.688382] The buggy address belongs to the page: [ 3117.688554] page:ffffea00063c2980 count:1 mapcount:0 mapping:ffff8801f3403180 index:0x0 [ 3117.688788] flags: 0x17fff8000000100(slab) [ 3117.688944] raw: 017fff8000000100 ffffea00063c2840 0000000e0000000e ffff8801f3403180 [ 3117.689166] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 3117.689386] page dumped because: kasan: bad access detected [ 3117.689653] Memory state around the buggy address: [ 3117.689816] ffff88018f0a6280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3117.690027] ffff88018f0a6300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690239] >ffff88018f0a6380: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.690448] ^ [ 3117.690644] ffff88018f0a6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690868] ffff88018f0a6480: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.691077] ================================================================== [ 3117.691290] Disabling lock debugging due to kernel taint [ 3117.693893] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 3117.694120] PGD 80000001f01bc067 P4D 80000001f01bc067 PUD 1d9638067 PMD 0 [ 3117.694338] Oops: 0002 [#1] SMP KASAN PTI [ 3117.694490] CPU: 1 PID: 1225 Comm: mount Tainted: G B W 4.17.0+ #1 [ 3117.694703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.695073] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.695246] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.695793] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.695969] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.696182] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.696391] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.696604] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.696813] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.697032] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.697280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.702357] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.707235] Call Trace: [ 3117.712077] locate_dirty_segment+0x189/0x190 [ 3117.716891] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.721617] recover_data+0x703/0x2c20 [ 3117.726316] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.730957] ? ksys_mount+0x7e/0xd0 [ 3117.735573] ? policy_nodemask+0x1a/0x90 [ 3117.740198] ? policy_node+0x56/0x70 [ 3117.744829] ? add_fsync_inode+0xf0/0xf0 [ 3117.749487] ? blk_finish_plug+0x44/0x60 [ 3117.754152] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.758831] ? find_inode_fast+0xac/0xc0 [ 3117.763448] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.768046] ? __radix_tree_lookup+0x150/0x150 [ 3117.772603] ? dqget+0x670/0x670 [ 3117.777159] ? pagecache_get_page+0x29/0x410 [ 3117.781648] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.786067] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.790476] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.794790] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.799086] ? rb_insert_color+0x323/0x3d0 [ 3117.803304] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.807563] ? proc_register+0x153/0x1d0 [ 3117.811766] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.815947] ? f2fs_attr_store+0x50/0x50 [ 3117.820087] ? proc_create_single_data+0x52/0x60 [ 3117.824262] f2fs_fill_super+0x1d06/0x2b40 [ 3117.828367] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.832432] ? sget_userns+0x65e/0x690 [ 3117.836500] ? set_blocksize+0x88/0x130 [ 3117.840501] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.844420] mount_bdev+0x1c0/0x200 [ 3117.848275] mount_fs+0x5c/0x190 [ 3117.852053] vfs_kern_mount+0x64/0x190 [ 3117.855810] do_mount+0x2e4/0x1450 [ 3117.859441] ? lockref_put_return+0x130/0x130 [ 3117.862996] ? copy_mount_string+0x20/0x20 [ 3117.866417] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.869719] ? kasan_kmalloc+0xa6/0xd0 [ 3117.872948] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.876121] ? __kmalloc_track_caller+0x196/0x210 [ 3117.879333] ? _copy_from_user+0x61/0x90 [ 3117.882467] ? memdup_user+0x3e/0x60 [ 3117.885604] ksys_mount+0x7e/0xd0 [ 3117.888700] __x64_sys_mount+0x62/0x70 [ 3117.891742] do_syscall_64+0x73/0x160 [ 3117.894692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.897669] RIP: 0033:0x7f5693f14b9a [ 3117.900563] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.906922] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.910159] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.913469] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.916764] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.920071] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.923393] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.926680] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.949979] CR2: 0000000000000000 [ 3117.954283] ---[ end trace a8e0d899985faf32 ]--- [ 3117.958575] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.962810] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.971789] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.976333] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.980926] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.985497] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.990098] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.994761] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.999392] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3118.004096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3118.008816] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 - Location https://elixir.bootlin.com/linux/v4.18-rc3/source/fs/f2fs/segment.c#L775 if (test_and_clear_bit(segno, dirty_i->dirty_segmap[t])) dirty_i->nr_dirty[t]--; Here dirty_i->dirty_segmap[t] can be NULL which leads to crash in test_and_clear_bit() Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-10f2fs: avoid f2fs_bug_on() in cp_error caseJaegeuk Kim
There is a subtle race condition to invoke f2fs_bug_on() in shutdown tests. I've confirmed that the last checkpoint is preserved in consistent state, so it'd be fine to just return error at this moment. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-10f2fs: fix to clear PG_checked flag in set_page_dirty()Chao Yu
PG_checked flag will be set on data page during GC, later, we can recognize such page by the flag and migrate page to cold segment. But previously, we don't clear this flag when invalidating data page, after page redirtying, we will write it into wrong log. Let's clear PG_checked flag in set_page_dirty() to avoid this. Signed-off-by: Weichao Guo <guoweichao@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-10drm/msm: a6xx: fix spelling mistake: "initalization" -> "initialization"Colin Ian King
Trivial fix to spelling mistake in dev_err message and comment Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-08-10drm/msm/disp/dpu: fix early dereference of physical encoderJeykumar Sankaran
This change validates the physical encoder before it is dereferenced. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-08-10drm/msm: Add A6XX device supportJordan Crouse
Add support for the A6XX family of Adreno GPUs. The biggest addition is the GMU (Graphics Management Unit) which takes over most of the power management of the GPU itself but in a ironic twist of fate needs a goodly amount of management itself. Add support for the A6XX core code, the GMU and the HFI (hardware firmware interface) queue that the CPU uses to communicate with the GMU. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-08-10drm/msm: update generated headersRob Clark
Resync generated headers to pull in a6xx registers. Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-08-10drm/msm/adreno: Load the firmware before bringing up the hardwareJordan Crouse
Failure to load firmware is the primary reason to fail adreno_load_gpu(). Try to load it first before going into the hardware initialization code and unwinding it. This is important for a6xx because the GMU gets loaded from the runtime power code and it is more costly to fail in that path because of missing firmware. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-08-10drm/msm: Add a helper function to parse clock namesJordan Crouse
Add a helper function to parse the clock names and set up the bulk data so we can take advantage of the bulk clock functions instead of rolling our own. This is added as a helper function so the upcoming a6xx GMU code can also take advantage of it. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-08-10Documentation: corrections to console/console.txtRandy Dunlap
Fix typos, line length, grammar, punctuation, and capitalization in console.txt. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Antonino A. Daplas <adaplas@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-08-10Documentation: add ioctl number entry for v4l2-subdev.hRandy Dunlap
Update ioctl-number.txt for ioctl's that are defined in <media/v4l2-subdev.h>. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-08-10Remove gendered language from management style documentationFox Foster
This small commit replaces gendered pronouns for neutral ones. Signed-off-by: Fox Foster <fox@tardis.ed.ac.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-08-10IB/uverbs: Remove the ib_uverbs_attr pointer from each attrJason Gunthorpe
Memory in the bundle is valuable, do not waste it holding an 8 byte pointer for the rare case of writing to a PTR_OUT. We can compute the pointer by storing a small 1 byte array offset and the base address of the uattr memory in the bundle private memory. This also means we can access the kernel's copy of the ib_uverbs_attr, so drop the copy of flags as well. Since the uattr base should be private bundle information this also de-inlines the already too big uverbs_copy_to inline and moves create_udata into uverbs_ioctl.c so they can see the private struct definition. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
2018-08-10IB/uverbs: Provide implementation private memory for the uverbs_attr_bundleJason Gunthorpe
This already existed as the anonymous 'ctx' structure, but this was not really a useful form. Hoist this struct into bundle_priv and rework the internal things to use it instead. Move a bunch of the processing internal state into the priv and reduce the excessive use of function arguments. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
2018-08-10IB/uverbs: Use uverbs_api to manage the object type inside the uobjectJason Gunthorpe
Currently the struct uverbs_obj_type stored in the ib_uobject is part of the .rodata segment of the module that defines the object. This is a problem if drivers define new uapi objects as we will be left with a dangling pointer after device disassociation. Switch the uverbs_obj_type for struct uverbs_api_object, which is allocated memory that is part of the uverbs_api and is guaranteed to always exist. Further this moves the 'type_class' into this memory which means access to the IDR/FD function pointers is also guaranteed. Drivers cannot define new types. This makes it safe to continue to use all uobjects, including driver defined ones, after disassociation. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-10IB/uverbs: Build the specs into a radix tree at runtimeJason Gunthorpe
This radix tree datastructure is intended to replace the 'hash' structure used today for parsing ioctl methods during system calls. This first commit introduces the structure and builds it from the existing .rodata descriptions. The so-called hash arrangement is actually a 5 level open coded radix tree. This new version uses a 3 level radix tree built using the radix tree library. Overall this is much less code and much easier to build as the radix tree API allows for dynamic modification during the building. There is a small memory penalty to pay for this, but since the radix tree is allocated on a per device basis, a few kb of RAM seems immaterial considering the gained simplicity. The radix tree is similar to the existing tree, but also has a 'attr_bkey' concept, which is a small value'd index for each method attribute. This is used to simplify and improve performance of everything in the next patches. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
2018-08-10IB/uverbs: Have the core code create the uverbs_root_specJason Gunthorpe
There is no reason for drivers to do this, the core code should take of everything. The drivers will provide their information from rodata to describe their modifications to the core's base uapi specification. The core uses this to build up the runtime uapi for each device. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
2018-08-10liquidio: copperhead LED identificationRaghu Vatsavayi
Add LED identification support for liquidio TP copperhead cards. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qed/qede: qede_setup_tc() can be statickbuild test robot
Fixes: 5e7baf0fcb2a ("qed/qede: Multi CoS support.") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10mlxsw: core: remove unnecessary function mlxsw_core_driver_putYueHaibing
The function mlxsw_core_driver_put only traverse mlxsw_core_driver_list to find the matched mlxsw_driver,but never used it. So it can be removed safely. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net: mvneta: fix mvneta_config_rss on armada 3700Jisheng Zhang
The mvneta Ethernet driver is used on a few different Marvell SoCs. Some SoCs have per cpu interrupts for Ethernet events, the driver uses a per CPU napi structure for this case. Some SoCs such as armada 3700 have a single interrupt for Ethernet events, the driver uses a global napi structure for this case. Current mvneta_config_rss() always operates the per cpu napi structure. Fix it by operating a global napi for "single interrupt" case, and per cpu napi structure for remaining cases. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net/smc: send response to test link signalUrsula Braun
With SMC-D z/OS sends a test link signal every 10 seconds. Linux is supposed to answer, otherwise the SMC-D connection breaks. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10Merge branch 'r8169-smaller-improvements'David S. Miller
Heiner Kallweit says: ==================== r8169: smaller improvements This series includes smaller improvements, no functional change intended. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10r8169: don't configure max jumbo frame size per chip versionHeiner Kallweit
We don't have to configure the max jumbo frame size per chip (sub-)version. It can be easily determined based on the chip family. And new members of the RTL8168 family (if there are any) should be automatically covered. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10r8169: don't configure csum function per chip versionHeiner Kallweit
We don't have to configure the csum function per chip (sub-)version. The distinction is simple, versions RTL8102e and from RTL8168c onwards support csum_v2. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10r8169: simplify interrupt handlerHeiner Kallweit
Simplify the interrupt handler a little and make it better readable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10r8169: don't include asm headers directlyHeiner Kallweit
The asm headers shouldn't be included directly. asm/irq.h is implicitly included by linux/interrupt.h, and instead of asm/io.h include linux/io.h. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10r8169: remove version infoHeiner Kallweit
The version number hasn't changed for ages and in general I doubt it provides any benefit. The message in rtl_init_one() may even be misleading because it's printed also if something fails in probe. Therefore let's remove the version information. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-08-10 Here's one more (most likely last) bluetooth-next pull request for the 4.19 kernel. - Added support for MediaTek serial Bluetooth devices - Initial skeleton for controller-side address resolution support - Fix BT_HCIUART_RTL related Kconfig dependencies - A few other minor fixes/cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10gpio: it87: Add support for IT8613Leonid Bloch
This was tested on actual hardware and found to work fine, but currently the official specifications of this chip could not be obtained to confirm the numbers. Signed-off-by: Leonid Bloch <lbloch@janustech.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: it87: add support for IT8718F Super I/O.Ivan Podovalov
The DIO connector on the WAFER-945GSE is interfaced to GPIO ports on the ITE IT8718F Super I/O chipset. From the datasheet of ITE IT8718F, the GPIO interface is identical to IT8728, so just add it to the same case as the other chip. Signed-off-by: Ivan Podovalov <ipodovalov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpiolib: Avoid calling chip->request() for unused gpiosBiju Das
Add a check for unused gpios to avoid chip->request() call to client driver for unused gpios. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: tegra: Include the right headerLinus Walleij
This is a GPIO driver so include only <linux/gpio/driver.h>. Drop the use of GPIOF_* flags: these are for consumers, not drivers. Just return 0/1. Cc: Stefan Agner <stefan@agner.ch> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: mmio: Fix up inverted direction registersLinus Walleij
The bgpio_init() takes one of two arguments to specify a register to set the direction of the GPIO line: either dirout that indicates that a 1 in the bit in that register sets the corresponding line to output, or dirin which indicates that a 1 in the bit in that register sets the corresponding line to input. Conversely setting the bit to 0 on these will turn the line into input and output respectively. One of these can be defined but not both. This means that a platform that sets a bit to 1 for output only defines dirout and a platform that sets a bit to 0 for output only defines dirin. In short this defines the polarity of the direction register. Both can also be left as NULL meaning the GPIO chip is either input only or output only. Tomer Maimon discovered that for get/set chips (those where the get and set registers are defined but no separate clear register, and specifying BGPIOF_READ_OUTPUT_REG_SET so that we say we want to read the output value from the SET register) we are unconditionally reading the value from the SET register when the direction bit is 1 and from the DAT register when the direction bit is 0, not taking the direction bit polarity into account. It would be expected that when the direction bit is inverted (dirin is defined but not dirout) we read the current value from the DAT register when the bit is 1 and from the SET register when the bit is 0. Currently only some versions of ATH79, brcmstb, some versions of CLP711x, GE, IOP and Loongson use the dirin mode (a 1 in the register means input). They are unaffected because BGPIOF_READ_OUTPUT_REG_SET is not set on any of them. (They do not read back the SET register to figure out the output value.) So this is no regression with current drivers. However the behaviour is wrong and does not work with Tomer's new driver where he needs to use the BGIOF_READ_OUTPUT_REG_SET. This fixes the above issue by: - Instead of defining separate functions for the inverted case, set up a flag in the gpio_chip that indicates that the direction is inverted. - Remove the special inverted functions for setting input/output and getting the direction, rely on the flag instead. - Respect this flag in bgpio_get_set() and bgpio_get_set_multiple() Reported-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: xilinx: Use the right includeLinus Walleij
This is a GPIO driver so use only <linux/gpio/driver.h>. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10pinctrl: nomadik: silence uninitialized variable warningDan Carpenter
This is harmless, but "val" isn't necessarily initialized if abx500_get_register_interruptible() fails. I've re-arranged the code to just return an error code in that situation. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10pinctrl: axp209: Fix NULL pointer dereference after allocationAnton Vasilyev
There is no check that allocation in axp20x_funcs_groups_from_mask is successful. The patch adds corresponding check and return values. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: timberdale: Include the right headerLinus Walleij
This is a GPIO driver so include only <linux/gpio/driver.h>. Cc: Richard Röjfors <richard.rojfors@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: tb10x: Use the right includeLinus Walleij
This driver includes the legacy <linux/gpio.h> and <linux/of_gpio.h> but all it needs is really <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpiolib: Fix of_node inconsistencyBiju Das
Some platforms are not setting of_node in the driver. On these platforms defining gpio-reserved-ranges on device tree leads to kernel crash. It is due to some parts of the gpio core relying on the driver to set up of_node,while other parts do themselves.This inconsistent behaviour leads to a crash. gpiochip_add_data_with_key() calls gpiochip_init_valid_mask() with of_node as NULL. of_gpiochip_add() fills "of_node" and calls of_gpiochip_init_valid_mask(). The fix is to move the assignment to chip->of_node from of_gpiochip_add() to gpiochip_add_data_with_key(). Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10pinctrl: samsung: Remove duplicated "wakeup" in printkKrzysztof Kozlowski
Double "wakeup" appears in printed message. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10tracepoints: Free early tracepoints after RCU is initializedSteven Rostedt (VMware)
When enabling trace events via the kernel command line, I hit this warning: WARNING: CPU: 0 PID: 13 at kernel/rcu/srcutree.c:236 check_init_srcu_struct+0xe/0x61 Modules linked in: CPU: 0 PID: 13 Comm: watchdog/0 Not tainted 4.18.0-rc6-test+ #6 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 RIP: 0010:check_init_srcu_struct+0xe/0x61 Code: 48 c7 c6 ec 8a 65 b4 e8 ff 79 fe ff 48 89 df 31 f6 e8 f2 fa ff ff 5a 5b 41 5c 5d c3 0f 1f 44 00 00 83 3d 68 94 b8 01 01 75 02 <0f> 0b 48 8b 87 f0 0a 00 00 a8 03 74 45 55 48 89 e5 41 55 41 54 4c RSP: 0000:ffff96eb9ea03e68 EFLAGS: 00010246 RAX: ffff96eb962b5b01 RBX: ffffffffb4a87420 RCX: 0000000000000001 RDX: ffffffffb3107969 RSI: ffff96eb962b5b40 RDI: ffffffffb4a87420 RBP: ffff96eb9ea03eb0 R08: ffffabbd00cd7f48 R09: 0000000000000000 R10: ffff96eb9ea03e68 R11: ffffffffb4a6eec0 R12: ffff96eb962b5b40 R13: ffff96eb9ea03ef8 R14: ffffffffb3107969 R15: ffffffffb3107948 FS: 0000000000000000(0000) GS:ffff96eb9ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff96eb13ab2000 CR3: 0000000192a1e001 CR4: 00000000001606f0 Call Trace: <IRQ> ? __call_srcu+0x2d/0x290 ? rcu_process_callbacks+0x26e/0x448 ? allocate_probes+0x2b/0x2b call_srcu+0x13/0x15 rcu_free_old_probes+0x1f/0x21 rcu_process_callbacks+0x2ed/0x448 __do_softirq+0x172/0x336 irq_exit+0x62/0xb2 smp_apic_timer_interrupt+0x161/0x19e apic_timer_interrupt+0xf/0x20 </IRQ> The problem is that the enabling of trace events before RCU is set up will cause SRCU to give this warning. To avoid this, add a list to store probes that need to be freed till after RCU is initialized, and then free them then. Link: http://lkml.kernel.org/r/20180810113554.1df28050@gandalf.local.home Link: http://lkml.kernel.org/r/20180810123517.5e9714ad@gandalf.local.home Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Fixes: e6753f23d961d ("tracepoint: Make rcuidle tracepoint callers use SRCU") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-10uprobes: Use synchronize_rcu() not synchronize_sched()Steven Rostedt (VMware)
While debugging another bug, I was looking at all the synchronize*() functions being used in kernel/trace, and noticed that trace_uprobes was using synchronize_sched(), with a comment to synchronize with {u,ret}_probe_trace_func(). When looking at those functions, the data is protected with "rcu_read_lock()" and not with "rcu_read_lock_sched()". This is using the wrong synchronize_*() function. Link: http://lkml.kernel.org/r/20180809160553.469e1e32@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 70ed91c6ec7f8 ("tracing/uprobes: Support ftrace_event_file base multibuffer") Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-10x86/mm/pti: Move user W+X check into pti_finalize()Joerg Roedel
The user page-table gets the updated kernel mappings in pti_finalize(), which runs after the RO+X permissions got applied to the kernel page-table in mark_readonly(). But with CONFIG_DEBUG_WX enabled, the user page-table is already checked in mark_readonly() for insecure mappings. This causes false-positive warnings, because the user page-table did not get the updated mappings yet. Move the W+X check for the user page-table into pti_finalize() after it updated all required mappings. [ tglx: Folded !NX supported fix ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1533727000-9172-1-git-send-email-joro@8bytes.org
generated by cgit (git 2.34.1) at 2025-09-16 02:41:00 +0000