| Age | Commit message (Collapse) | Author |
|---|
|
tracepoint_synchronize_unregister()
Now that some trace events can be protected by srcu_read_lock(tracepoint_srcu),
we need to make sure all locations that depend on this are also protected.
There were many places that did a synchronize_sched() thinking that it was
enough to protect againts access to trace events. This use to be the case,
but now that we use SRCU for _rcuidle() trace events, they may not be
protected by synchronize_sched(), as they may be called in paths that RCU is
not watching for preempt disable.
Fixes: e6753f23d961d ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pointer ftrace_swapper_pid is defined but is never used hence it is
redundant and can be removed. The use of this variable was removed
in commit 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap
like events do").
Cleans up clang warning:
warning: 'ftrace_swapper_pid' defined but not used [-Wunused-const-variable=]
Link: http://lkml.kernel.org/r/20180809125609.13142-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
unify their usage"
Joel Fernandes created a nice patch that cleaned up the duplicate hooks used
by lockdep and irqsoff latency tracer. It made both use tracepoints. But the
latency tracer is triggering warnings when using tracepoints to call into
the latency tracer's routines. Mainly, they can be called from NMI context.
If that happens, then the SRCU may not work properly because on some
architectures, SRCU is not safe to be called in both NMI and non-NMI
context.
This is a partial revert of the clean up patch c3bc8fd637a9 ("tracing:
Centralize preemptirq tracepoints and unify their usage") that adds back the
direct calls into the latency tracer. It also only calls the trace events
when not in NMI.
Link: http://lkml.kernel.org/r/20180809210654.622445925@goodmis.org
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Fixes: c3bc8fd637a9 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
I was hitting the following warning:
WARNING: CPU: 0 PID: 1 at kernel/trace/trace_irqsoff.c:631 tracer_hardirqs_off+0x15/0x2a
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc6-test+ #13
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tracer_hardirqs_off+0x15/0x2a
Code: ff 85 c0 74 0e 8b 45 00 8b 50 04 8b 45 04 e8 35 ff ff ff 5d c3 55 64 a1 cc 37 51 c1 a9 ff ff ff 7f 89 e5 53 89 d3 89 ca 75 02 <0f> 0b e8 90 fc ff ff 85 c0 74 07 89 d8 e8 0c ff ff ff 5b 5d c3 55
EAX: 80000000 EBX: c04337f0 ECX: c04338e3 EDX: c04338e3
ESI: c04337f0 EDI: c04338e3 EBP: f2aa1d68 ESP: f2aa1d64
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210046
CR0: 80050033 CR2: 00000000 CR3: 01668000 CR4: 001406f0
Call Trace:
trace_irq_disable_rcuidle+0x63/0x6c
trace_hardirqs_off+0x26/0x30
default_send_IPI_mask_allbutself_logical+0x31/0x93
default_send_IPI_allbutself+0x37/0x48
native_send_call_func_ipi+0x4d/0x6a
smp_call_function_many+0x165/0x19d
? add_nops+0x34/0x34
? trace_hardirqs_on_caller+0x2d/0x2d
? add_nops+0x34/0x34
smp_call_function+0x1f/0x23
on_each_cpu+0x15/0x43
? trace_hardirqs_on_caller+0x2d/0x2d
? trace_hardirqs_on_caller+0x2d/0x2d
? trace_irq_disable_rcuidle+0x1/0x6c
text_poke_bp+0xa0/0xc2
? trace_hardirqs_on_caller+0x2d/0x2d
arch_jump_label_transform+0xa7/0xcb
? trace_irq_disable_rcuidle+0x5/0x6c
__jump_label_update+0x3e/0x6d
jump_label_update+0x7d/0x81
static_key_slow_inc_cpuslocked+0x58/0x6d
static_key_slow_inc+0x19/0x20
tracepoint_probe_register_prio+0x19e/0x1d1
? start_critical_timings+0x1c/0x1c
tracepoint_probe_register+0xf/0x11
irqsoff_tracer_init+0x21/0xf2
tracer_init+0x16/0x1a
trace_selftest_startup_irqsoff+0x25/0xc4
run_tracer_selftest+0xca/0x131
register_tracer+0xd5/0x172
? trace_event_define_fields_preemptirq_template+0x45/0x45
init_irqsoff_tracer+0xd/0x11
do_one_initcall+0xab/0x1e8
? rcu_read_lock_sched_held+0x3d/0x44
? trace_initcall_level+0x52/0x86
kernel_init_freeable+0x195/0x21a
? rest_init+0xb4/0xb4
kernel_init+0xd/0xe4
ret_from_fork+0x2e/0x38
It is due to running a CONFIG_PREEMPT_VOLUNTARY kernel, which would trigger
this warning every time:
WARN_ON_ONCE(preempt_count());
Because on CONFIG_PREEMPT_VOLUNTARY, preempt_count() is always zero.
This warning is to make sure preempt_count is set because
tracer_hardirqs_on() does a preempt_enable_notrace() to make the
preempt_trace() work properly, as being called by a trace event, the trace
event code disables preemption, and the tracer wants to know what the
preemption was before it was called.
Instead of enabling preemption like this, just record the preempt_count,
subtract PREEMPT_DISABLE_OFFSET from it (which is zero with !CONFIG_PREEMPT
set), and pass that value to the necessary functions, which should use the
passed in parameter instead of calling preempt_count() directly.
Fixes: da5b3ebb45277 ("tracing: irqsoff: Account for additional preempt_disable")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
unify their usage"
Joel Fernandes created a nice patch that cleaned up the duplicate hooks used
by lockdep and irqsoff latency tracer. It made both use tracepoints. But it
caused lockdep to trigger several false positives. We have not figured out
why yet, but removing lockdep from using the trace event hooks and just call
its helper functions directly (like it use to), makes the problem go away.
This is a partial revert of the clean up patch c3bc8fd637a9 ("tracing:
Centralize preemptirq tracepoints and unify their usage") that adds direct
calls for lockdep, but also keeps most of the clean up done to get rid of
the horrible preprocessor if statements.
Link: http://lkml.kernel.org/r/20180806155058.5ee875f4@gandalf.local.home
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Fixes: c3bc8fd637a9 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
0day kernel testing robot got the below dmesg and the first bad commit is
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
commit 3354b54f9f7037a1122d3b6009aa9d39829d6843
[ 248.847809] BUG: unable to handle kernel paging request at ffffc90000393131
[ 248.848015] Call Trace:
[ 248.848015] ? vivid_dev_release+0xc0/0xc0
[ 248.848015] ? acpi_dev_pm_attach+0x27/0xd0
This reverts commit 3354b54f9f7037a1122d3b6009aa9d39829d6843.
|
|
Yonghong Song says:
====================
Commit a26ca7c982cb ("bpf: btf: Add pretty print support to
the basic arraymap") added pretty print support to array map.
This patch adds pretty print for hash and lru_hash maps.
The following example shows the pretty-print result of a pinned
hashmap. Without this patch set, user will get an error instead.
struct map_value {
int count_a;
int count_b;
};
cat /sys/fs/bpf/pinned_hash_map:
87907: {87907,87908}
57354: {37354,57355}
76625: {76625,76626}
...
Patch #1 fixed a bug in bpffs map_seq_next() function so that
all elements in the hash table will be traversed.
Patch #2 implemented map_seq_show_elem() and map_check_btf()
callback functions for hash and lru hash maps.
Patch #3 enhanced tools/testing/selftests/bpf/test_btf.c to
test bpffs hash and lru hash map pretty print.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Pretty print tests for hash/lru_hash maps are added in test_btf.c.
The btf type blob is the same as pretty print array map test.
The test result:
$ mount -t bpf bpf /sys/fs/bpf
$ ./test_btf -p
BTF pretty print array......OK
BTF pretty print hash......OK
BTF pretty print lru hash......OK
PASS:3 SKIP:0 FAIL:0
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit a26ca7c982cb ("bpf: btf: Add pretty print support to
the basic arraymap") added pretty print support to array map.
This patch adds pretty print for hash and lru_hash maps.
The following example shows the pretty-print result of
a pinned hashmap:
struct map_value {
int count_a;
int count_b;
};
cat /sys/fs/bpf/pinned_hash_map:
87907: {87907,87908}
57354: {37354,57355}
76625: {76625,76626}
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
In function map_seq_next() of kernel/bpf/inode.c,
the first key will be the "0" regardless of the map type.
This works for array. But for hash type, if it happens
key "0" is in the map, the bpffs map show will miss
some items if the key "0" is not the first element of
the first bucket.
This patch fixed the issue by guaranteeing to get
the first element, if the seq_show is just started,
by passing NULL pointer key to map_get_next_key() callback.
This way, no missing elements will occur for
bpffs hash table show even if key "0" is in the map.
Fixes: a26ca7c982cb5 ("bpf: btf: Add pretty print support to the basic arraymap")
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Rebuild the AGI header items with some help from the rmapbt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Repair the AGFL from the rmap data.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Regenerate the AGF from the rmap data.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
the struct pevent to struct tep_handle.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180659.706175783@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit ea8c5356d390 ("bcache: set max writeback rate when I/O request
is idle") changes struct bch_ratelimit member rate from uint32_t to
atomic_long_t and uses atomic_long_set() in drivers/md/bcache/sysfs.c
to set new writeback rate, after the input is converted from memory
buf to long int by sysfs_strtoul_clamp().
The above change has a problem because there is an implicit return
inside sysfs_strtoul_clamp() so the following atomic_long_set()
won't be called. This error is detected by 0day system with following
snipped smatch warnings:
drivers/md/bcache/sysfs.c:271 __cached_dev_store() error: uninitialized
symbol 'v'.
270 sysfs_strtoul_clamp(writeback_rate, v, 1, INT_MAX);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@271 atomic_long_set(&dc->writeback_rate.rate, v);
This patch fixes the above error by using strtoul_safe_clamp() to
convert the input buffer into a long int type result.
Fixes: ea8c5356d390 ("bcache: set max writeback rate when I/O request is idle")
Cc: Kai Krakow <kai@kaishome.de>
Cc: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains netfilter updates for your net-next tree:
1) Expose NFT_OSF_MAXGENRELEN maximum OS name length from the new OS
passive fingerprint matching extension, from Fernando Fernandez.
2) Add extension to support for fine grain conntrack timeout policies
from nf_tables. As preparation works, this patchset moves
nf_ct_untimeout() to nf_conntrack_timeout and it also decouples the
timeout policy from the ctnl_timeout object, most work done by
Harsha Sharma.
3) Enable connection tracking when conntrack helper is in place.
4) Missing enumeration in uapi header when splitting original xt_osf
to nfnetlink_osf, also from Fernando.
5) Fix a sparse warning due to incorrect typing in the nf_osf_find(),
from Wei Yongjun.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When both ends of a PCIe Link are capable of a higher bandwidth than is
currently in use, the Link is said to be "downtrained". A downtrained Link
may indicate hardware or configuration problems in the system, but it's
hard to identify such Links from userspace.
Refactor pcie_print_link_status() so it continues to always print PCIe
bandwidth information, as several NIC drivers desire.
Add a new internal __pcie_print_link_status() to emit a message only when a
device's bandwidth is constrained by the fabric and call it from the PCI
core for all devices, which identifies all downtrained Links. It also
emits messages for a few cases that are technically not downtrained, such
as a x4 device in an open-ended x1 slot.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
[bhelgaas: changelog, move __pcie_print_link_status() declaration to
drivers/pci/, rename pcie_check_upstream_link() to
pcie_report_downtraining()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
display Data Center bridging information in debug
fs.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Array pci_speed is defined but is never used hence it is redundant
and can be removed.
Cleans up clang warning:
warning: 'pci_speed' defined but not used [-Wunused-const-variable=]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Arrays mlxsw_i2c_driver_name and mlxsw_pci_driver_name are defined
but never used hence they are redundant and can be removed.
Cleans up clang warnings:
warning: 'mlxsw_i2c_driver_name' defined but not used
warning: 'mlxsw_pci_driver_name' defined but not used
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Building virtio_net driver without CONFIG_XPS fails with:
drivers/net/virtio_net.c: In function ‘virtnet_set_affinity’:
drivers/net/virtio_net.c:1910:3: error: implicit declaration of function ‘__netif_set_xps_queue’ [-Werror=implicit-function-declaration]
__netif_set_xps_queue(vi->dev, mask, i, false);
^
Fixes: 4d99f6602cb5 ("net: allow to call netif_reset_xps_queues() under cpus_read_lock")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A single driver bugfix for I2C.
The bug was found by systematically stress testing the driver, so I am
confident to merge it that late in the cycle although it is probably
unusually large"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xlp9xx: Fix case where SSIF read transaction completes early
|
|
mounting with the "snapshots=" mount parm allows a read-only
view of a previous version of a file system (see MS-SMB2
and "timewarp" tokens, section 2.2.13.2.6) based on the timestamp
passed in on the snapshots mount parm.
Add processing to optionally send this create context.
Example output:
/mnt1 is mounted with "snapshots=..." and will see an earlier
version of the directory, with three fewer files than /mnt2
the current version of the directory.
root@Ubuntu-17-Virtual-Machine:~/cifs-2.6# cat /proc/mounts | grep cifs
//172.22.149.186/public /mnt1 cifs
ro,relatime,vers=default,cache=strict,username=smfrench,uid=0,noforceuid,gid=0,noforcegid,addr=172.22.149.186,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=1048576,wsize=1048576,echo_interval=60,snapshot=131748608570000000,actimeo=1
//172.22.149.186/public /mnt2 cifs
rw,relatime,vers=default,cache=strict,username=smfrench,uid=0,noforceuid,gid=0,noforcegid,addr=172.22.149.186,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=1048576,wsize=1048576,echo_interval=60,actimeo=1
root@Ubuntu-17-Virtual-Machine:~/cifs-2.6# ls /mnt1
EmptyDir newerdir
root@Ubuntu-17-Virtual-Machine:~/cifs-2.6# ls /mnt1/newerdir
root@Ubuntu-17-Virtual-Machine:~/cifs-2.6# ls /mnt2
EmptyDir file newerdir newestdir timestamp-trace.cap
root@Ubuntu-17-Virtual-Machine:~/cifs-2.6# ls /mnt2/newerdir
new-file-not-in-snapshot
Snapshots are extremely useful for comparing previous versions of files or directories,
and recovering from data corruptions or mistakes.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
We were missing the methods for get_acl and friends for the 3.11
dialect.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
|
|
|
|
|
|
|
|
Add the QCOM RPMh regulator driver to manage PMIC regulators
which are controlled via RPMh on some Qualcomm Technologies, Inc.
SoCs. RPMh is a hardware block which contains several
accelerators which are used to manage various hardware resources
that are shared between the processors of the SoC. The final
hardware state of a regulator is determined within RPMh by
performing max aggregation of the requests made by all of the
processors.
Add support for PMIC regulator control via the voltage regulator
manager (VRM) and oscillator buffer (XOB) RPMh accelerators.
VRM supports manipulation of enable state, voltage, and mode.
XOB supports manipulation of enable state.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce bindings for RPMh regulator devices found on some
Qualcomm Technlogies, Inc. SoCs. These devices allow a given
processor within the SoC to make PMIC regulator requests which
are aggregated within the RPMh hardware block along with requests
from other processors in the SoC to determine the final PMIC
regulator hardware state.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into regulator-4.19 for RPMH
Qualcomm ARM Based Driver Updates for v4.19
* Add Qualcomm LLCC driver
* Add Qualcomm RPMH controller
* Fix memleak in Qualcomm RMTFS
* Add dummy qcom_scm_assign_mem()
* Fix check for global partition in SMEM
|
|
Change update device function to return an error pointer if needed,
and report the error to user space.
Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
[groeck: Clarified/updated description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
I2C SMBus sometimes returns error codes.
In the error case, measurement values are updated incorrectly.
The sensor application then generates warning log messages and SNMP traps.
To prevent this, add error handling into the update functions.
Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
[groeck: Update description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Currently the valid variable is of type char, but it is used as boolean.
So let's change it to bool.
Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
[groeck: Update description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The update function reads both measurement and limit values.
Those parts can be split so split them for a maintainability.
Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
[groeck: Clarify description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix grammar, spacing, indentation, and Kconfig menu locations
in fbcon.txt.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
Taking over the console involves allocating mem with GFP_KERNEL, talking
to drm drivers, etc. So this should not be done from an atomic context.
But the console-output trigger deferred console takeover may happen from an
atomic context, which leads to "BUG: sleeping function called from invalid
context" errors.
This commit fixes these errors by doing the deferred takeover from a
workqueue.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[b.zolnierkie: remove unused variable]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
Now that we only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER when
fbdev+fbcon are builtin exporting these is no longer necessary.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
We rely on dummycon's output notifier mechanism to defer the takeover.
If say vgacon is the current console driver then dummycon will never get
used so its output notifier will also never get called and fbcon never
takes over. This commit fixes this by only deferring the console takeover
if the current console driver is the dummycon driver.
This commit also moves the entirety of fbcon_start under the console_lock,
since the conswitchp which fbcon_start now checks is protected by it.
This commit also inlines fbcon_register_output_notifier, since we now
need a #ifdef CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER in fbcon_start
anyways because of the write access to the deferred_takeover variable,
this has the added advantage that it puts the
dummycon_register_output_notifier() call directly after the "conswitchp !=
&dummy_con" comparison making it clear why that check is there.
Note the arch setup code will set conswitchp to either dummy_con or
vga_con, in the cases where it gets set to vga_con even though their is
no vga_con present we rely on vga_con_startup() to set conswitchp to
dummy_con. vga_con_startup() is guaranteed to happen before
fb_console_init() as it gets called as a console_initcall where as
fb_console_init() gets called as a subsys_initcall.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
Having FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER with fbdev+fbcon being build
as a module does not make much sense.
Having FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER only when fbdev+fbcon are
builtin was always the intention, hence the =y checks but they were
checking the wrong option, fbcon is build as part of fb.ko, so we must
check for FB=y.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
Add the definitions for LE address resolution enable HCI commands.
When the LE address resolution enable gets changed via HCI commands
make sure that flag gets updated.
Signed-off-by: Ankit Navik <ankit.p.navik@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Toshiaki Makita says:
====================
This patch set introduces driver XDP for veth.
Basically this is used in conjunction with redirect action of another XDP
program.
NIC -----------> veth===veth
(XDP) (redirect) (XDP)
In this case xdp_frame can be forwarded to the peer veth without
modification, so we can expect far better performance than generic XDP.
Envisioned use-cases
--------------------
* Container managed XDP program
Container host redirects frames to containers by XDP redirect action, and
privileged containers can deploy their own XDP programs.
* XDP program cascading
Two or more XDP programs can be called for each packet by redirecting
xdp frames to veth.
* Internal interface for an XDP bridge
When using XDP redirection to create a virtual bridge, veth can be used
to create an internal interface for the bridge.
Implementation
--------------
This changeset is making use of NAPI to implement ndo_xdp_xmit and
XDP_TX/REDIRECT. This is mainly because XDP heavily relies on NAPI
context.
- patch 1: Export a function needed for veth XDP.
- patch 2-3: Basic implementation of veth XDP.
- patch 4-6: Add ndo_xdp_xmit.
- patch 7-9: Add XDP_TX and XDP_REDIRECT.
- patch 10: Performance optimization for multi-queue env.
Tests and performance numbers
-----------------------------
Tested with a simple XDP program which only redirects packets between
NIC and veth. I used i40e 25G NIC (XXV710) for the physical NIC. The
server has 20 of Xeon Silver 2.20 GHz cores.
pktgen --(wire)--> XXV710 (i40e) <--(XDP redirect)--> veth===veth (XDP)
The rightmost veth loads XDP progs and just does DROP or TX. The number
of packets is measured in the XDP progs. The leftmost pktgen sends
packets at 37.1 Mpps (almost 25G wire speed).
veth XDP action Flows Mpps
================================
DROP 1 10.6
DROP 2 21.2
DROP 100 36.0
TX 1 5.0
TX 2 10.0
TX 100 31.0
I also measured netperf TCP_STREAM but was not so great performance due
to lack of tx/rx checksum offload and TSO, etc.
netperf <--(wire)--> XXV710 (i40e) <--(XDP redirect)--> veth===veth (XDP PASS)
Direction Flows Gbps
==============================
external->veth 1 20.8
external->veth 2 23.5
external->veth 100 23.6
veth->external 1 9.0
veth->external 2 17.8
veth->external 100 22.9
Also tested doing ifup/down or load/unload a XDP program repeatedly
during processing XDP packets in order to check if enabling/disabling
NAPI is working as expected, and found no problems.
v8:
- Don't use xdp_frame pointer address to calculate skb->head, headroom,
and xdp_buff.data_hard_start.
v7:
- Introduce xdp_scrub_frame() to clear kernel pointers in xdp_frame and
use it instead of memset().
v6:
- Check skb->len only if reallocation is needed.
- Add __GFP_NOWARN to alloc_page() since it can be triggered by external
events.
- Fix sparse warning around EXPORT_SYMBOL.
v5:
- Fix broken SOBs.
v4:
- Don't adjust MTU automatically.
- Skip peer IFF_UP check on .ndo_xdp_xmit() because it is unnecessary.
Add comments to explain that.
- Use redirect_info instead of xdp_mem_info for storing no_direct flag
to avoid per packet copy cost.
v3:
- Drop skb bulk xmit patch since it makes little performance
difference. The hotspot in TCP skb xmit at this point is checksum
computation in skb_segment and packet copy on XDP_REDIRECT due to
cloned/nonlinear skb.
- Fix race on closing device.
- Add extack messages in ndo_bpf.
v2:
- Squash NAPI patch with "Add driver XDP" patch.
- Remove conversion from xdp_frame to skb when NAPI is not enabled.
- Introduce per-queue XDP ring (patch 8).
- Introduce bulk skb xmit when XDP is enabled on the peer (patch 9).
====================
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Move XDP and napi related fields from veth_priv to newly created veth_rq
structure.
When xdp_frames are enqueued from ndo_xdp_xmit and XDP_TX, rxq is
selected by current cpu.
When skbs are enqueued from the peer device, rxq is one to one mapping
of its peer txq. This way we have a restriction that the number of rxqs
must not less than the number of peer txqs, but leave the possibility to
achieve bulk skb xmit in the future because txq lock would make it
possible to remove rxq ptr_ring lock.
v3:
- Add extack messages.
- Fix array overrun in veth_xmit.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This allows further redirection of xdp_frames like
NIC -> veth--veth -> veth--veth
(XDP) (XDP) (XDP)
The intermediate XDP, redirecting packets from NIC to the other veth,
reuses xdp_mem_info from NIC so that page recycling of the NIC works on
the destination veth's XDP.
In this way return_frame is not fully guarded by NAPI, since another
NAPI handler on another cpu may use the same xdp_mem_info concurrently.
Thus disable napi_direct by xdp_set_return_frame_no_direct() during the
NAPI context.
v8:
- Don't use xdp_frame pointer address for data_hard_start of xdp_buff.
v4:
- Use xdp_[set|clear]_return_frame_no_direct() instead of a flag in
xdp_mem_info.
v3:
- Fix double free when veth_xdp_tx() returns a positive value.
- Convert xdp_xmit and xdp_redir variables into flags.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
We need some mechanism to disable napi_direct on calling
xdp_return_frame_rx_napi() from some context.
When veth gets support of XDP_REDIRECT, it will redirects packets which
are redirected from other devices. On redirection veth will reuse
xdp_mem_info of the redirection source device to make return_frame work.
But in this case .ndo_xdp_xmit() called from veth redirection uses
xdp_mem_info which is not guarded by NAPI, because the .ndo_xdp_xmit()
is not called directly from the rxq which owns the xdp_mem_info.
This approach introduces a flag in bpf_redirect_info to indicate that
napi_direct should be disabled even when _rx_napi variant is used as
well as helper functions to use it.
A NAPI handler who wants to use this flag needs to call
xdp_set_return_frame_no_direct() before processing packets, and call
xdp_clear_return_frame_no_direct() after xdp_do_flush_map() before
exiting NAPI.
v4:
- Use bpf_redirect_info for storing the flag instead of xdp_mem_info to
avoid per-frame copy cost.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
We are going to add kern_flags field in redirect_info for kernel
internal use.
In order to avoid function call to access the flags, make redirect_info
accessible from modules. Also as it is now non-static, add prefix bpf_
to redirect_info.
v6:
- Fix sparse warning around EXPORT_SYMBOL.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This allows NIC's XDP to redirect packets to veth. The destination veth
device enqueues redirected packets to the napi ring of its peer, then
they are processed by XDP on its peer veth device.
This can be thought as calling another XDP program by XDP program using
REDIRECT, when the peer enables driver XDP.
Note that when the peer veth device does not set driver xdp, redirected
packets will be dropped because the peer is not ready for NAPI.
v4:
- Don't use xdp_ok_fwd_dev() because checking IFF_UP is not necessary.
Add comments about it and check only MTU.
v2:
- Drop the part converting xdp_frame into skb when XDP is not enabled.
- Implement bulk interface of ndo_xdp_xmit.
- Implement XDP_XMIT_FLUSH bit and drop ndo_xdp_flush.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This is preparation for XDP TX and ndo_xdp_xmit.
This allows napi handler to handle xdp_frames through xdp ring as well
as sk_buff.
v8:
- Don't use xdp_frame pointer address to calculate skb->head and
headroom.
v7:
- Use xdp_scrub_frame() instead of memset().
v3:
- Revert v2 change around rings and use a flag to differentiate skb and
xdp_frame, since bulk skb xmit makes little performance difference
for now.
v2:
- Use another ring instead of using flag to differentiate skb and
xdp_frame. This approach makes bulk skb transmit possible in
veth_xmit later.
- Clear xdp_frame feilds in skb->head.
- Implement adjust_tail.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
xdp_frame has kernel pointers which should not be readable from bpf
programs. When we want to reuse xdp_frame region but it may be read by
bpf programs later, we can use this helper to clear kernel pointers.
This is more efficient than calling memset() for the entire struct.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
