summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-24scsi: aic7xxx: Remove unnecessary NULL checks before kfreeAlex Dewar
There are a number of places in the aic7xxx driver where a NULL check is performed before a kfree(). However, kfree() already performs NULL checks so this is unnecessary. Remove the checks. Issue identified with Coccinelle. Link: https://lore.kernel.org/r/20200403164712.49579-1-alex.dewar@gmx.co.uk Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: aic7xxx: Use kzalloc() instead of kmalloc()+memset()Alex Dewar
There are a couple of places where kzalloc() could be used directly instead of calling kmalloc() then memset(). Replace them. Link: https://lore.kernel.org/r/20200403163611.46756-1-alex.dewar@gmx.co.uk Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: cxgb4i: Remove superfluous null checkXu Wang
In do_abort_rpl_rss, the null check of 'clk' is not needed. Link: https://lore.kernel.org/r/20200402110832.12712-1-vulab@iscas.ac.cn Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: qla2xxx: Fix MPI failure AEN (8200) handlingArun Easi
Today, upon an MPI failure AEN, on top of collecting an MPI dump, a regular firmware dump is also taken and then chip reset. This is disruptive to IOs and not required. Make the firmware dump collection, followed by chip reset, optional (not done by default). Firmware dump buffer and MPI dump buffer are independent of each other with this change and each can have dump that was taken at two different times for two different issues. The MPI dump is saved in a separate buffer and is retrieved differently from firmware dump. To collect full dump on MPI failure AEN, a module parameter is introduced: ql2xfulldump_on_mpifail (default: 0) Link: https://lore.kernel.org/r/20200331104015.24868-2-njavali@marvell.com Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-22scsi: lpfc: remove duplicate unloading checksJames Smart
During code reviews several instances of duplicate module unloading checks were found. Remove the duplicate checks. Link: https://lore.kernel.org/r/20200421203354.49420-1-jsmart2021@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-22scsi: mpt3sas: use true,false for bool variablesJason Yan
Fix the following coccicheck warning: drivers/scsi/mpt3sas/mpt3sas_base.c:416:6-14: WARNING: Assignment of 0/1 to bool variable drivers/scsi/mpt3sas/mpt3sas_base.c:485:2-10: WARNING: Assignment of 0/1 to bool variable Link: https://lore.kernel.org/r/20200421034101.28273-1-yanaijie@huawei.com Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-22scsi: fcoe: remove unneeded semicolon in fcoe.cJason Yan
Fix the following coccicheck warning: drivers/scsi/fcoe/fcoe.c:1918:3-4: Unneeded semicolon drivers/scsi/fcoe/fcoe.c:1930:3-4: Unneeded semicolon Link: https://lore.kernel.org/r/20200421034008.27865-1-yanaijie@huawei.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-22scsi: ufs-qcom: remove unneeded variable 'ret'Jason Yan
Fix the following coccicheck warning: drivers/scsi/ufs/ufs-qcom.c:575:5-8: Unneeded variable: "ret". Return "0" on line 590 Link: https://lore.kernel.org/r/20200418070625.11756-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-22scsi: st: remove unneeded variable 'result' in st_release()Jason Yan
Also remove a strange '^L' after this function. Fix the following coccicheck warning: drivers/scsi/st.c:1460:5-11: Unneeded variable: "result". Return "0" on line 1473 Link: https://lore.kernel.org/r/20200418070605.11450-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Get dev info after updating the paramsSaurav Kashyap
An update to pf params can change the devinfo. Get updated device information. [mkp: updated error message spotted by Sergei Shtylyov] Link: https://lore.kernel.org/r/20200416084314.18851-10-skashyap@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Fix crash when MFW calls for protocol stats while function is ↵Chad Dupuis
still probing The MFW may make a call to qed and then to qedf for protocol statistics while the function is still probing. If this happens it's possible that some members of the struct qedf_ctx may not be fully initialized which can result in a NULL pointer dereference or general protection fault. To prevent this, add a new flag call QEDF_PROBING and set it when the __qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data() function we can check if the function is still probing and return immediantely before any uninitialized structures can be touched. Link: https://lore.kernel.org/r/20200416084314.18851-9-skashyap@marvell.com Signed-off-by: Chad Dupuis <cdupuis@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Add schedule recovery handlerChad Dupuis
Implement recovery handler to be used by QED to signal the need for recovery to come out of an error condition like ramrod struck and firmware context reset. Link: https://lore.kernel.org/r/20200416084314.18851-8-skashyap@marvell.com Signed-off-by: Chad Dupuis <cdupuis@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Implement callback for bw_updateSaurav Kashyap
Add support for the common qed bw_update callback to qedf. This function is called whenever there is a reported change in the bandwidth and updates corresponding values in sysfs. Link: https://lore.kernel.org/r/20200416084314.18851-7-skashyap@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qed: Send BW update notifications to the protocol driversSudarsana Reddy Kalluru
Management firmware (MFW) sends a notification whenever there is a change in the bandwidth values. Add driver support for sending this notification to the upper layer drivers (e.g., qedf). Link: https://lore.kernel.org/r/20200416084314.18851-6-skashyap@marvell.com Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Honor status qualifier in FCP_RSP per specJaved Hasan
Handle scope and qualifier on SAM_STAT_TASK_SET_FULL or SAM_STAT_BUSY [mkp: added braces to fix sparse complaint] Link: https://lore.kernel.org/r/20200416084314.18851-5-skashyap@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Acquire rport_lock for resetting the delay_timestampJaved Hasan
Retry delay timestamp is updated in queuecommand as well as in qedf_scsi_completion routine. Protect it using lock. Link: https://lore.kernel.org/r/20200416084314.18851-4-skashyap@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Increase the upper limit of retry delayJaved Hasan
Max time to hold the IO in case of SAM_STAT_TASK_SET_FULL or SAM_STAT_BUSY. Link: https://lore.kernel.org/r/20200416084314.18851-3-skashyap@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Keep track of num of pending flogiSaurav Kashyap
If a port is brought down for an extended period of time, the fipvlan counter gets exhausted and the driver will fall back to default VLAN 1002 and call fcoe_ctlr_link_up to log in. However, the switch will discard the FLOGI attempt because the VLAN is now different. Keep track of the number of FLOGI attempts and if a threshold of QEDF_FLOGI_RETRY_CNT is exceeded, perform a context soft reset. Link: https://lore.kernel.org/r/20200416084314.18851-2-skashyap@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: mvsas: remove unused symbol 'mvs_th'Jason Yan
This symbol has no users so remove it. Link: https://lore.kernel.org/r/20200415085053.7633-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: mvsas: make mvst_host_attrs staticJason Yan
Fix the following sparse warning: drivers/scsi/mvsas/mv_init.c:28:25: warning: symbol 'mvst_host_attrs' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415085044.7460-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedi: make qedi_ll2_buf_size staticJason Yan
Fix the following sparse warning: drivers/scsi/qedi/qedi_main.c:44:6: warning: symbol 'qedi_ll2_buf_size' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415085029.7170-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: ufs: full reinit upon resume if link was offAsutosh Das
During suspend, if the link is put to off, it would require a full initialization during resume. This patch resets and restores both the host and the card during initialization, otherwise host-only reset and restore would fail occasionally. Link: https://lore.kernel.org/r/1586844892-22720-1-git-send-email-cang@codeaurora.org Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Stanley Chu <stanley.chu@mediatek.com> Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: fnic: make vnic_wq_get_ctrl and vnic_wq_alloc_ring staticJason Yan
Fix the following sparse warning: drivers/scsi/fnic/vnic_wq.c:28:5: warning: symbol 'vnic_wq_get_ctrl' was not declared. Should it be static? drivers/scsi/fnic/vnic_wq.c:40:5: warning: symbol 'vnic_wq_alloc_ring' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415093809.9365-3-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: fnic: make fnic_list and fnic_list_lock staticJason Yan
Fix the following sparse warning: drivers/scsi/fnic/fnic_main.c:52:1: warning: symbol 'fnic_list' was not declared. Should it be static? drivers/scsi/fnic/fnic_main.c:53:1: warning: symbol 'fnic_list_lock' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415093809.9365-2-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: fnic: make some symbols staticJason Yan
Fix the following sparse warning: drivers/scsi/fnic/vnic_dev.c:257:5: warning: symbol 'vnic_dev_cmd1' was not declared. Should it be static? drivers/scsi/fnic/vnic_dev.c:319:5: warning: symbol 'vnic_dev_cmd2' was not declared. Should it be static? drivers/scsi/fnic/vnic_dev.c:414:5: warning: symbol 'vnic_dev_init_devcmd1' was not declared. Should it be static? drivers/scsi/fnic/vnic_dev.c:425:5: warning: symbol 'vnic_dev_init_devcmd2' was not declared. Should it be static? drivers/scsi/fnic/vnic_dev.c:495:6: warning: symbol 'vnic_dev_deinit_devcmd2' was not declared. Should it be static? drivers/scsi/fnic/vnic_dev.c:506:5: warning: symbol 'vnic_dev_cmd_no_proxy' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415093809.9365-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: libsas: Add missing annotation for sas_ata_qc_issue()Jules Irenge
Sparse reports a warning at sas_ata_qc_issue() warning: context imbalance in sas_ata_qc_issue() - unexpected unlock The root cause is the missing annotation at sas_ata_qc_issue() Add the missing __must_hold(ap->lock) annotation Link: https://lore.kernel.org/r/20200411001933.10072-7-jbi.octave@gmail.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: ipr: remove unneeded semicolonJason Yan
Fix the following coccicheck warning: drivers/scsi/ipr.c:1167:2-3: Unneeded semicolon Link: https://lore.kernel.org/r/20200413082822.24356-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: qla1280: make qla1280_firmware_mutex and qla1280_fw_tbl staticJason Yan
Fix the following sparse warning: drivers/scsi/qla1280.c:529:1: warning: symbol 'qla1280_firmware_mutex' was not declared. Should it be static? drivers/scsi/qla1280.c:538:15: warning: symbol 'qla1280_fw_tbl' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200409084910.44336-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: megaraid: make two symbols static in megaraid_sas_base.cJason Yan
Fix the following sparse warning: drivers/scsi/megaraid/megaraid_sas_base.c:84:5: warning: symbol 'rdpq_enable' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_base.c:92:14: warning: symbol 'scmd_timeout' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407092827.18074-5-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: megaraid: make some symbols static in megaraid_sas_fusion.cJason Yan
Fix the following sparse warning: drivers/scsi/megaraid/megaraid_sas_fusion.c:180:1: warning: symbol 'megasas_enable_intr_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:202:1: warning: symbol 'megasas_disable_intr_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:4233:6: warning: symbol 'megasas_refire_mgmt_cmd' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407092827.18074-4-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: megaraid: make some symbols static in megaraid_sas_fp.cJason Yan
Fix the following sparse warning: drivers/scsi/megaraid/megaraid_sas_fp.c:88:5: warning: symbol 'mega_div64_32' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fp.c:370:5: warning: symbol 'MR_GetSpanBlock' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fp.c:420:5: warning: symbol 'mr_spanset_get_span_block' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fp.c:645:4: warning: symbol 'get_arm' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fp.c:788:4: warning: symbol 'MR_GetPhyParams' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fp.c:1345:4: warning: symbol 'megasas_get_best_arm_pd' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407092827.18074-3-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: megaraid: make two symbols static in megaraid_mbox.cJason Yan
Fix the following sparse warning: drivers/scsi/megaraid/megaraid_mbox.c:305:5: warning: symbol 'dev_attr_megaraid_mbox_app_hndl' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_mbox.c:315:5: warning: symbol 'dev_attr_megaraid_mbox_ld' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407092827.18074-2-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfad.c: make max_rport_logins staticJason Yan
Fix the following sparse warning: drivers/scsi/bfa/bfad.c:53:17: warning: symbol 'max_rport_logins' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-8-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfad_attr.c: make two funcitons staticJason Yan
Fix the following sparse warning: drivers/scsi/bfa/bfad_attr.c:441:1: warning: symbol 'bfad_im_issue_fc_host_lip' was not declared. Should it be static? drivers/scsi/bfa/bfad_attr.c:566:1: warning: symbol 'bfad_im_vport_set_symbolic_name' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-7-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfa_ioc_ct.c: make two funcitons staticJason Yan
Fix the following sparse warning: drivers/scsi/bfa/bfa_ioc_ct.c:368:1: warning: symbol 'bfa_ioc_ct2_lpu_read_stat' was not declared. Should it be static? drivers/scsi/bfa/bfa_ioc_ct.c:748:1: warning: symbol 'bfa_ioc_ct2_mac_reset' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-6-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfa_fcs_lport.c: make bfa_fcport_get_loop_attr() staticJason Yan
Fix the following sparse warning: drivers/scsi/bfa/bfa_fcs_lport.c:1287:1: warning: symbol 'bfa_fcport_get_loop_attr' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-5-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfa_fcpim.c: make two functions staticJason Yan
Fix the following sparse warning: drivers/scsi/bfa/bfa_fcpim.c:440:1: warning: symbol 'bfa_ioim_profile_comp' was not declared. Should it be static? drivers/scsi/bfa/bfa_fcpim.c:457:1: warning: symbol 'bfa_ioim_profile_start' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-4-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfa_core.c: make bfa_isr_rspq() staticJason Yan
Fix the following sparse warning: drivers/scsi/bfa/bfa_core.c:712:1: warning: symbol 'bfa_isr_rspq' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-3-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfa_svc.c: make two functions staticJason Yan
Fix the following sparse warning: drivers/scsi/bfa/bfa_svc.c:4288:1: warning: symbol 'bfa_fcport_ddportenable' was not declared. Should it be static? drivers/scsi/bfa/bfa_svc.c:4297:1: warning: symbol 'bfa_fcport_ddportdisable' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-2-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: gdth: Make __gdth_execute staticWang Hai
Fix sparse warning: drivers/scsi/gdth.c:332:5: warning: symbol '__gdth_execute' was not declared. Should it be static? Link: https://lore.kernel.org/r/1586276474-34480-1-git-send-email-wanghai38@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: qla2xxx: Use ARRAY_SIZE() instead of open-coding itBart Van Assche
This patch does not change any functionality. Link: https://lore.kernel.org/r/20200413021359.21725-1-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qla2xxx: Split qla2x00_configure_local_loop()Bart Van Assche
The size of the function qla2x00_configure_local_loop() hurts its readability. Hence split that function. This patch does not change any functionality. Link: https://lore.kernel.org/r/20200405225905.17171-1-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Fix termination timeouts in session logoutNilesh Javali
The destroy connection ramrod timed out during session logout. Fix the wait delay for graceful vs abortive termination as per the FW requirements. Link: https://lore.kernel.org/r/20200408064332.19377-7-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Add modules param to enable qed iSCSI debugManish Rangankar
Add module parameter to enable debug messages specific to iSCSI functions. Link: https://lore.kernel.org/r/20200408064332.19377-6-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Do not flush offload work if ARP not resolvedNilesh Javali
For an unreachable target, offload_work is not initialized and the endpoint state is set to OFLDCONN_NONE. This results in a WARN_ON due to the check of the work function field being set to zero. ------------[ cut here ]------------ WARNING: CPU: 24 PID: 18587 at ../kernel/workqueue.c:3037 __flush_work+0x1c1/0x1d0 : Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 02/01/2020 RIP: 0010:__flush_work+0x1c1/0x1d0 Code: ba 6d 00 03 80 c9 f0 eb b6 48 c7 c7 20 ee 6c a4 e8 52 d3 04 00 0f 0b 31 c0 e9 d1 fe ff ff 48 c7 c7 20 ee 6c a4 e8 3d d3 04 00 <0f> 0b 31 c0 e9 bc fe ff ff e8 11 f3 f 00 31 f6 RSP: 0018:ffffac5a8cd47a80 EFLAGS: 00010282 RAX: 0000000000000024 RBX: ffff98d68c1fcaf0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff98ce9fd99898 RDI: ffff98ce9fd99898 RBP: ffff98d68c1fcbc0 R08: 00000000000006fa R09: 0000000000000001 R10: ffffac5a8cd47b50 R11: 0000000000000001 R12: 0000000000000000 R13: 000000000000489b R14: ffff98d68c1fc800 R15: ffff98d692132c00 FS: 00007f65f7f62280(0000) GS:ffff98ce9fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd2435e880 CR3: 0000000809334003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? class_create_release+0x40/0x40 ? klist_put+0x2c/0x80 qedi_ep_disconnect+0xdd/0x400 [qedi] iscsi_if_ep_disconnect.isra.20+0x59/0x70 [scsi_transport_iscsi] iscsi_if_rx+0x129b/0x1670 [scsi_transport_iscsi] ? __netlink_lookup+0xe7/0x160 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x30f/0x430 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1e2/0x240 ? copy_msghdr_from_user+0xd9/0x160 ___sys_sendmsg+0x88/0xd0 ? ___sys_recvmsg+0xa2/0xe0 ? hrtimer_try_to_cancel+0x25/0x100 ? do_nanosleep+0x9c/0x170 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f65f6f16107 Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 aa d2 2b 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 8 0 00 00 00 00 53 48 89 f3 48 RSP: 002b:00007ffd24367ca8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a7aeaaf110 RCX: 00007f65f6f16107 RDX: 0000000000000000 RSI: 00007ffd24367cc0 RDI: 0000000000000003 RBP: 0000000000000070 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000075c R11: 0000000000000246 R12: 00007ffd24367cc0 R13: 000055a7ae560008 R14: 00007ffd24367db0 R15: 0000000000000000 ---[ end trace 54f499c05d41f8bb ]--- Only flush if the connection endpoint state if different from OFLDCONN_NONE. [mkp: clarified commit desc] Link: https://lore.kernel.org/r/20200408064332.19377-5-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Use correct msix count for fastpath vectorsManish Rangankar
Use MSI-X count provided by qed. Link: https://lore.kernel.org/r/20200408064332.19377-4-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Avoid unnecessary endpoint allocation on link downManish Rangankar
No need to allocate and deallocate endpoint memory if the physical link is down. Link: https://lore.kernel.org/r/20200408064332.19377-3-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Remove additional char from boot target iqnnameManish Rangankar
While parsing the iSCSI TLV data to MFW request, a newline was added to the firmware boot target iqnname string. Because of this, we were getting the following error even after the boot target was successfully logged in: "[qedi_get_protocol_tlv_data:1197]:1: Boot target not set" Remove the trailing newline. [mkp: clarified commit desc] Link: https://lore.kernel.org/r/20200408064332.19377-2-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedf: Simplify mutex_unlock() usageDaniel Wagner
The commit 6d1368e8f987 ("scsi: qedf: fixup locking in qedf_restart_rport()") introduced the lock. Though the lock protects only the fc_rport_create() call. Thus, we can move the mutex unlock up before the if statement and drop the else body. Link: https://lore.kernel.org/r/20200403092717.19779-1-dwagner@suse.de Cc: Hannes Reinecke <hare@suse.com> Cc: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: docs: fusion: get rid of a doc build warningMauro Carvalho Chehab
Use a table for the enum list, to avoid this warning: ./drivers/message/fusion/mptbase.c:5058: WARNING: Definition list ends without a blank line; unexpected unindent. Link: https://lore.kernel.org/r/9ca049c2d25689c56448afddf4f0d1e619fa87f7.1586359676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-28 05:46:18 +0000