summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-12Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "There's quite a lot of code here, but much of it is due to the addition of a new PMU driver as well as some arm64-specific selftests which is an area where we've traditionally been lagging a bit. In terms of exciting features, this includes support for the Memory Tagging Extension which narrowly missed 5.9, hopefully allowing userspace to run with use-after-free detection in production on CPUs that support it. Work is ongoing to integrate the feature with KASAN for 5.11. Another change that I'm excited about (assuming they get the hardware right) is preparing the ASID allocator for sharing the CPU page-table with the SMMU. Those changes will also come in via Joerg with the IOMMU pull. We do stray outside of our usual directories in a few places, mostly due to core changes required by MTE. Although much of this has been Acked, there were a couple of places where we unfortunately didn't get any review feedback. Other than that, we ran into a handful of minor conflicts in -next, but nothing that should post any issues. Summary: - Userspace support for the Memory Tagging Extension introduced by Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11. - Selftests for MTE, Pointer Authentication and FPSIMD/SVE context switching. - Fix and subsequent rewrite of our Spectre mitigations, including the addition of support for PR_SPEC_DISABLE_NOEXEC. - Support for the Armv8.3 Pointer Authentication enhancements. - Support for ASID pinning, which is required when sharing page-tables with the SMMU. - MM updates, including treating flush_tlb_fix_spurious_fault() as a no-op. - Perf/PMU driver updates, including addition of the ARM CMN PMU driver and also support to handle CPU PMU IRQs as NMIs. - Allow prefetchable PCI BARs to be exposed to userspace using normal non-cacheable mappings. - Implementation of ARCH_STACKWALK for unwinding. - Improve reporting of unexpected kernel traps due to BPF JIT failure. - Improve robustness of user-visible HWCAP strings and their corresponding numerical constants. - Removal of TEXT_OFFSET. - Removal of some unused functions, parameters and prototypes. - Removal of MPIDR-based topology detection in favour of firmware description. - Cleanups to handling of SVE and FPSIMD register state in preparation for potential future optimisation of handling across syscalls. - Cleanups to the SDEI driver in preparation for support in KVM. - Miscellaneous cleanups and refactoring work" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits) Revert "arm64: initialize per-cpu offsets earlier" arm64: random: Remove no longer needed prototypes arm64: initialize per-cpu offsets earlier kselftest/arm64: Check mte tagged user address in kernel kselftest/arm64: Verify KSM page merge for MTE pages kselftest/arm64: Verify all different mmap MTE options kselftest/arm64: Check forked child mte memory accessibility kselftest/arm64: Verify mte tag inclusion via prctl kselftest/arm64: Add utilities and a test to validate mte memory perf: arm-cmn: Fix conversion specifiers for node type perf: arm-cmn: Fix unsigned comparison to less than zero arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option arm64: Pull in task_stack_page() to Spectre-v4 mitigation code KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled arm64: Get rid of arm64_ssbd_state KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state() KVM: arm64: Get rid of kvm_arm_have_ssbd() KVM: arm64: Simplify handling of ARCH_WORKAROUND_2 ...
2020-10-12net: dsa: microchip: fix race conditionChristian Eggers
Between queuing the delayed work and finishing the setup of the dsa ports, the process may sleep in request_module() (via phy_device_create()) and the queued work may be executed prior to the switch net devices being registered. In ksz_mib_read_work(), a NULL dereference will happen within netof_carrier_ok(dp->slave). Not queuing the delayed work in ksz_init_mib_timer() makes things even worse because the work will now be queued for immediate execution (instead of 2000 ms) in ksz_mac_link_down() via dsa_port_link_register_of(). Call tree: ksz9477_i2c_probe() \--ksz9477_switch_register() \--ksz_switch_register() +--dsa_register_switch() | \--dsa_switch_probe() | \--dsa_tree_setup() | \--dsa_tree_setup_switches() | +--dsa_switch_setup() | | +--ksz9477_setup() | | | \--ksz_init_mib_timer() | | | |--/* Start the timer 2 seconds later. */ | | | \--schedule_delayed_work(&dev->mib_read, msecs_to_jiffies(2000)); | | \--__mdiobus_register() | | \--mdiobus_scan() | | \--get_phy_device() | | +--get_phy_id() | | \--phy_device_create() | | |--/* sleeping, ksz_mib_read_work() can be called meanwhile */ | | \--request_module() | | | \--dsa_port_setup() | +--/* Called for non-CPU ports */ | +--dsa_slave_create() | | +--/* Too late, ksz_mib_read_work() may be called beforehand */ | | \--port->slave = ... | ... | +--Called for CPU port */ | \--dsa_port_link_register_of() | \--ksz_mac_link_down() | +--/* mib_read must be initialized here */ | +--/* work is already scheduled, so it will be executed after 2000 ms */ | \--schedule_delayed_work(&dev->mib_read, 0); \-- /* here port->slave is setup properly, scheduling the delayed work should be safe */ Solution: 1. Do not queue (only initialize) delayed work in ksz_init_mib_timer(). 2. Only queue delayed work in ksz_mac_link_down() if init is completed. 3. Queue work once in ksz_switch_register(), after dsa_register_switch() has completed. Fixes: 7c6ff470aa86 ("net: dsa: microchip: add MIB counter reading support") Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12Merge tag 'tpmdd-next-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: "Support for a new TPM device and fixes and Git URL change (infraded -> korg)" * tag 'tpmdd-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: MAINTAINERS: TPM DEVICE DRIVER: Update GIT tpm_tis: Add a check for invalid status tpm: use %*ph to print small buffer dt-bindings: Add SynQucer TPM MMIO as a trivial device tpm: tis: add support for MMIO TPM on SynQuacer
2020-10-12Merge tag 'linux-can-next-for-5.10-20201012' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== linux-can-next-for-5.10-20201012 Both patches are by Oliver Hartkopp, the first one addresses Jakub's review comments of the ISOTP protocol, the other one removes version strings from various CAN protocols. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12cx82310_eth: use netdev_err instead of dev_errOndrej Zary
Use netdev_err for better device identification in syslog. Signed-off-by: Ondrej Zary <linux@zary.sk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12cx82310_eth: re-enable ethernet mode after router rebootOndrej Zary
When the router is rebooted without a power cycle, the USB device remains connected but its configuration is reset. This results in a non-working ethernet connection with messages like this in syslog: usb 2-2: RX packet too long: 65535 B Re-enable ethernet mode when receiving a packet with invalid size of 0xffff. Signed-off-by: Ondrej Zary <linux@zary.sk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12module: statically initialize init section freeing dataDaniel Jordan
Corentin hit the following workqueue warning when running with CRYPTO_MANAGER_EXTRA_TESTS: WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0 Modules linked in: ghash_generic CPU: 2 PID: 147 Comm: modprobe Not tainted 5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty #545 Hardware name: Pine H64 model A (DT) pc : __queue_work+0x3b8/0x3d0 Call trace: __queue_work+0x3b8/0x3d0 queue_work_on+0x6c/0x90 do_init_module+0x188/0x1f0 load_module+0x1d00/0x22b0 I wasn't able to reproduce on x86 or rpi 3b+. This is WARN_ON(!list_empty(&work->entry)) from __queue_work(), and it happens because the init_free_wq work item isn't initialized in time for a crypto test that requests the gcm module. Some crypto tests were recently moved earlier in boot as explained in commit c4741b230597 ("crypto: run initcalls for generic implementations earlier"), which went into mainline less than two weeks before the Fixes commit. Avoid the warning by statically initializing init_free_wq and the corresponding llist. Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/ Fixes: 1a7b7d922081 ("modules: Use vmalloc special flag") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-on: sun50i-h6-pine-h64 Tested-on: imx8mn-ddr4-evk Tested-on: sun50i-a64-bananapi-m64 Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-10-12scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121Rob Herring
This adds the following commits from upstream: cbca977ea121 checks: Allow PCI bridge child nodes without an address 73e0f143b73d libfdt: fdt_strerror(): Fix comparison warning 6c2be7d85315 libfdt: fdt_get_string(): Fix sequential write comparison warnings 82525f41d59e libfdt: libfdt_wip: Fix comparison warning fb1f65f15832 libfdt: fdt_create_with_flags(): Fix comparison warning f28aa271000b libfdt: fdt_move(): Fix comparison warnings 3d7c6f44195a libfdt: fdt_add_string_(): Fix comparison warning 10f682788c30 libfdt: fdt_node_offset_by_phandle(): Fix comparison warning 07158f4cf2a2 libfdt: overlay: Fix comparison warning ce9e1f25a7de libfdt: fdt_resize(): Fix comparison warning faa76fc10bc5 libfdt: fdt_splice_(): Fix comparison warning 54dca0985316 libfdt: fdt_get_string(): Fix comparison warnings f8e11e61624e libfdt: fdt_grab_space_(): Fix comparison warning 0c43d4d7bf5a libfdt: fdt_mem_rsv(): Fix comparison warnings 442ea3dd1579 libfdt: fdt_offset_ptr(): Fix comparison warnings ca19c3db2bf6 Makefile: Specify cflags for libyaml 7bb86f1c0956 libfdt: fix fdt_check_node_offset_ w/ VALID_INPUT 3d522abc7571 dtc: Include stdlib.h in util.h 808cdaaf524f dtc: Avoid UB when shifting 3e3138b4a956 libfdt: fix fdt_check_full buffer overrun Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-12netfilter: nftables: extend error reporting for chain updatesPablo Neira Ayuso
The initial support for netlink extended ACK is missing the chain update path, which results in misleading error reporting in case of EEXIST. Fixes 36dd1bcc07e5 ("netfilter: nf_tables: initial support for extended ACK reporting") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-12NFSD: Encode a full READ_PLUS replyAnna Schumaker
Reply to the client with multiple hole and data segments. I use the result of the first vfs_llseek() call for encoding as an optimization so we don't have to immediately repeat the call. This also lets us encode any remaining reply as data if we get an unexpected result while trying to calculate a hole. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-12NFSD: Return both a hole and a data segmentAnna Schumaker
But only one of each right now. We'll expand on this in the next patch. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-12NFSD: Add READ_PLUS hole segment encodingAnna Schumaker
However, we still only reply to the READ_PLUS call with a single segment at this time. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-12NFSD: Add READ_PLUS data supportAnna Schumaker
This patch adds READ_PLUS support for returning a single NFS4_CONTENT_DATA segment to the client. This is basically the same as the READ operation, only with the extra information about data segments. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-12NFSD: Hoist status code encoding into XDR encoder functionsChuck Lever
The original intent was presumably to reduce code duplication. The trade-off was: - No support for an NFSD proc function returning a non-success RPC accept_stat value. - No support for void NFS replies to non-NULL procedures. - Everyone pays for the deduplication with a few extra conditional branches in a hot path. In addition, nfsd_dispatch() leaves *statp uninitialized in the success path, unlike svc_generic_dispatch(). Address all of these problems by moving the logic for encoding the NFS status code into the NFS XDR encoders themselves. Then update the NFS .pc_func methods to return an RPC accept_stat value. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-12dt-bindings: Add running yamllint to dt_binding_checkRob Herring
Add a yamllint config file and support for running yamllint on DT binding schema files. This runs on the whole tree as yamllint is Python and suffers from Python's slow startup times. Users can run on individual files doing: yamllint -c Documentation/devicetree/bindings/.yamllint <binding file> Link: https://lore.kernel.org/r/20201009170557.168785-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-12Merge tag 'asoc-v5.10' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.10 Not a huge amount going on in the core for ASoC this time but quite a lot of driver activity, especially for the Intel platforms: - Replacement of the DSP driver for some older x86 systems with a new one which was written with closer reference to the DSP firmware so should hopefully be more robust and maintainable. - A big batch of static checker and other fixes for the rest of the x86 DSP drivers. - Cleanup of the error unwinding code from Morimoto-san, hopefully making it more robust. - Helpers for parsing auxiluary devices from the device tree from Stephan Gerhold. - New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764
2020-10-12libceph: clear con->out_msg on Policy::stateful_server faultsIlya Dryomov
con->out_msg must be cleared on Policy::stateful_server (!CEPH_MSG_CONNECT_LOSSY) faults. Not doing so botches the reconnection attempt, because after writing the banner the messenger moves on to writing the data section of that message (either from where it got interrupted by the connection reset or from the beginning) instead of writing struct ceph_msg_connect. This results in a bizarre error message because the server sends CEPH_MSGR_TAG_BADPROTOVER but we think we wrote struct ceph_msg_connect: libceph: mds0 (1)172.21.15.45:6828 socket error on write ceph: mds0 reconnect start libceph: mds0 (1)172.21.15.45:6829 socket closed (con state OPEN) libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch, my 32 != server's 32 libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch AFAICT this bug goes back to the dawn of the kernel client. The reason it survived for so long is that only MDS sessions are stateful and only two MDS messages have a data section: CEPH_MSG_CLIENT_RECONNECT (always, but reconnecting is rare) and CEPH_MSG_CLIENT_REQUEST (only when xattrs are involved). The connection has to get reset precisely when such message is being sent -- in this case it was the former. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/47723 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-10-12libceph: format ceph_entity_addr nonces as unsignedIlya Dryomov
Match the server side logs. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12libceph: fix ENTITY_NAME format suggestionIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12libceph: move a dout in queue_con_delay()Ilya Dryomov
The queued con->work can start executing (and therefore logging) before we get to this "con->work has been queued" message, making the logs confusing. Move it up, with the meaning of "con->work is about to be queued". Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: comment cleanups and clarificationsJeff Layton
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: break up send_cap_msgJeff Layton
Push the allocation of the msg and the send into the caller. Rename the function to encode_cap_msg and make it void return. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: drop separate mdsc argument from __send_capJeff Layton
We can get it from the session if we need it. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: promote to unsigned long long before shiftingMatthew Wilcox (Oracle)
On 32-bit systems, this shift will overflow for files larger than 4GB. Cc: stable@vger.kernel.org Fixes: 61f68816211e ("ceph: check caps in filemap_fault and page_mkwrite") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: don't SetPageError on readpage errorsJeff Layton
PageError really only has meaning within a particular subsystem. Nothing looks at this bit in the core kernel code, and ceph itself doesn't care about it. Don't bother setting the PageError bit on error. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: mark ceph_fmt_xattr() as printf-like for better type checkingIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: fold ceph_update_writeable_page into ceph_write_beginJeff Layton
...and reorganize the loop for better clarity. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: fold ceph_sync_writepages into writepage_nounlockJeff Layton
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: fold ceph_sync_readpages into ceph_readpageJeff Layton
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: don't call ceph_update_writeable_page from page_mkwriteJeff Layton
page_mkwrite should only be called with Uptodate pages, so we should only need to flush incompatible snap contexts. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: break out writeback of incompatible snap context to separate functionJeff Layton
When dirtying a page, we have to flush incompatible contexts. Move the search for an incompatible context into a separate function, and fix up the caller to wait and retry if there is one. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: add a note explaining session reject error stringIlya Dryomov
error_string key in the metadata map of MClientSession message is intended for humans, but unfortunately became part of the on-wire format with the introduction of recover_session=clean mode in commit 131d7eb4faa1 ("ceph: auto reconnect after blacklisted"). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12libceph: switch to the new "osd blocklist add" commandIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12libceph, rbd, ceph: "blacklist" -> "blocklist"Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: have ceph_writepages_start call pagevec_lookup_range_tagJeff Layton
Currently it calls pagevec_lookup_range_nr_tag(), but that may be inefficient, as we might end up having to search several times as we get down to looking for fewer pages to fill the array. Thus spake Willy: "I think ceph is misusing pagevec_lookup_range_nr_tag(). Let's suppose you get a range which is AAAAbbbbAAAAbbbbAAAAbbbbbbbb(...)bbbbAAAA and you try to fetch max_pages=13. First loop will get AAAAbbbbAAAAb and have 8 locked_pages. The next call will get bbbAA and now locked_pages=10. Next call gets AAb ... and now you're iterating your way through all the 'b' one page at a time until you find that first A." 'A' here refers to pages that are eligible for writeback and 'b' represents ones that aren't (for whatever reason). Not capping the number of return pages may mean that we sometimes find more pages than are needed, but the extra references will just get put at the end. Ceph is also the only caller of pagevec_lookup_range_nr_tag(), so this change should allow us to eliminate that call as well. That will be done in a follow-on patch. Reported-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: use kill_anon_super helperJeff Layton
ceph open-codes this around some other activity and the rationale for it isn't clear. There is no need to delay free_anon_bdev until the end of kill_sb. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: metrics for opened files, pinned caps and opened inodesXiubo Li
In client for each inode, it may have many opened files and may have been pinned in more than one MDS servers. And some inodes are idle, which have no any opened files. This patch will show these metrics in the debugfs, likes: item total ----------------------------------------- opened files / total inodes 14 / 5 pinned i_caps / total inodes 7 / 5 opened inodes / total inodes 3 / 5 Will send these metrics to ceph, which will be used by the `fs top`, later. [ jlayton: drop unrelated hunk, count hashed inodes instead of allocated ones ] URL: https://tracker.ceph.com/issues/47005 Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: add ceph_sb_to_mdsc helper support to parse the mdscXiubo Li
This will help simplify the code. [ jlayton: fix minor merge conflict in quota.c ] Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: drop special-casing for ITER_PIPE in ceph_sync_readJeff Layton
This special casing was added in 7ce469a53e71 (ceph: fix splice read for no Fc capability case). The confirm callback for ITER_PIPE expects that the page is Uptodate and returns an error otherwise. A simpler workaround is just to use the Uptodate bit, which has no meaning for anonymous pages. Rip out the special casing for ITER_PIPE and just SetPageUptodate before we copy to the iter. Cc: John Hubbard <jhubbard@nvidia.com> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: add column 'mds' to show caps in more user friendlyYanhu Cao
In multi-mds, the 'caps' debugfs file will have duplicate ino, add the 'mds' column to indicate which mds session the cap belongs to. Signed-off-by: Yanhu Cao <gmayyyha@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12libceph: multiple workspaces for CRUSH computationsIlya Dryomov
Replace a global map->crush_workspace (protected by a global mutex) with a list of workspaces, up to the number of CPUs + 1. This is based on a patch from Robin Geuze <robing@nl.team.blue>. Robin and his team have observed a 10-20% increase in IOPS on all queue depths and lower CPU usage as well on a high-end all-NVMe 100GbE cluster. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: remove unnecessary return in switch statementLuis Henriques
Since there's a return immediately after the 'break', there's no need for this extra 'return' in the S_IFDIR case. Signed-off-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: encode inodes' parent/d_name in cap reconnect messageYan, Zheng
Since nautilus, MDS tracks dirfrags whose child inodes have caps in open file table. When MDS recovers, it prefetches all of these dirfrags. This avoids using backtrace to load inodes. But dirfrags prefetch may load lots of useless inodes into cache, and make MDS run out of memory. Recent MDS adds an option that disables dirfrags prefetch. When dirfrags prefetch is disabled. Recovering MDS only prefetches corresponding dir inodes. Including inodes' parent/d_name in cap reconnect message can help MDS to load inodes into its cache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12Merge branch 'efi/urgent' into efi/core, to pick up fixesIngo Molnar
These fixes missed the v5.9 merge window, pick them up for early v5.10 merge. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-10-12perf/core: Fix race in the perf_mmap_close() functionJiri Olsa
There's a possible race in perf_mmap_close() when checking ring buffer's mmap_count refcount value. The problem is that the mmap_count check is not atomic because we call atomic_dec() and atomic_read() separately. perf_mmap_close: ... atomic_dec(&rb->mmap_count); ... if (atomic_read(&rb->mmap_count)) goto out_put; <ring buffer detach> free_uid out_put: ring_buffer_put(rb); /* could be last */ The race can happen when we have two (or more) events sharing same ring buffer and they go through atomic_dec() and then they both see 0 as refcount value later in atomic_read(). Then both will go on and execute code which is meant to be run just once. The code that detaches ring buffer is probably fine to be executed more than once, but the problem is in calling free_uid(), which will later on demonstrate in related crashes and refcount warnings, like: refcount_t: addition on 0; use-after-free. ... RIP: 0010:refcount_warn_saturate+0x6d/0xf ... Call Trace: prepare_creds+0x190/0x1e0 copy_creds+0x35/0x172 copy_process+0x471/0x1a80 _do_fork+0x83/0x3a0 __do_sys_wait4+0x83/0x90 __do_sys_clone+0x85/0xa0 do_syscall_64+0x5b/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Using atomic decrease and check instead of separated calls. Tested-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Wade Mealing <wmealing@redhat.com> Fixes: 9bb5d40cd93c ("perf: Fix mmap() accounting hole"); Link: https://lore.kernel.org/r/20200916115311.GE2301783@krava
2020-10-12Merge branch 'printk-rework' into for-linusPetr Mladek
2020-10-12ALSA: hda: fix jack detection with Realtek codecs when in D3Kai Vehmanen
In case HDA controller becomes active, but codec is runtime suspended, jack detection is not successful and no interrupt is raised. This has been observed with multiple Realtek codecs and HDA controllers from different vendors. Bug does not occur if both codec and controller are active, or both are in suspend. Bug can be easily hit on desktop systems with no built-in speaker. The problem can be fixed by powering up the codec once after every controller runtime resume. Even if codec goes back to suspend later, the jack detection will continue to work. Add a flag to 'hda_codec' to describe codecs that require this flow from the controller driver. Modify __azx_runtime_resume() to use pm_request_resume() to make the intent clearer. Mark all Realtek codecs with the new forced_resume flag. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209379 Cc: Kailang Yang <kailang@realtek.com> Co-developed-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201012102704.794423-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-10-12tomoyo: Loosen pathname/domainname validation.Tetsuo Handa
Since commit e2dc9bf3f5275ca3 ("umd: Transform fork_usermode_blob into fork_usermode_driver") started calling execve() on a program written in a local mount which is not connected to mount tree, tomoyo_realpath_from_path() started returning a pathname in "$fsname:/$pathname" format which violates TOMOYO's domainname rule that it must start with "<$namespace>" followed by zero or more repetitions of pathnames which start with '/'. Since $fsname must not contain '.' since commit 79c0b2df79eb56fc ("add filesystem subtype support"), tomoyo_correct_path() can recognize a token which appears '/' before '.' appears (e.g. proc:/self/exe ) as a pathname while rejecting a token which appears '.' before '/' appears (e.g. exec.realpath="/bin/bash" ) as a condition parameter. Therefore, accept domainnames which contain pathnames which do not start with '/' but contain '/' before '.' (e.g. <kernel> tmpfs:/bpfilter_umh ). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
2020-10-12cpufreq: stats: Fix string format specifier mismatchViresh Kumar
Fix following warning: drivers/cpufreq/cpufreq_stats.c:63:10: warning: %d in format string (no. 1) requires 'int' but the argument type is 'unsigned int' Fixes: 40c3bd4cfa6f ("cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-12thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp()Jing Xiangfeng
thermal_genl_sampling_temp() misses to call nlmsg_free() in an error path. Jump to out_free to fix it. Fixes: 1ce50e7d408ef2 ("thermal: core: genetlink support for events/cmd/sampling") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200929082652.59876-1-jingxiangfeng@huawei.com
generated by cgit (git 2.34.1) at 2025-09-18 15:23:03 +0000