| Age | Commit message (Collapse) | Author |
|---|
|
commit 74abd086d2ee ("gpiolib: sanitize the return value of
gpio_chip::get_multiple()") altered the value returned by
gc->get_multiple() in case it is positive (> 0), but failed to return
for other cases (<= 0).
This may result in the "if (gc->get)" block being executed and thus
negates the performance gain that is normally obtained by using
gc->get_multiple().
Fix by returning the result of gc->get_multiple() if it is <= 0.
Also move the "ret" variable to the scope where it is used, which as an
added bonus fixes an indentation error introduced by the aforementioned
commit.
Fixes: 74abd086d2ee ("gpiolib: sanitize the return value of gpio_chip::get_multiple()")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250703191829.2952986-1-hugo@hugovil.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use pr_warn() instead of dev_warn() when 'pdev' is NULL to avoid a
potential NULL pointer dereference.
Cc: stable@vger.kernel.org
Fixes: 20869176d7a7 ("ALSA: ad1816a: Use standard print API")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250703200616.304309-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc5).
No conflicts.
No adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The cs40l50_upload_owt() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails.
Signed-off-by: Yunshui Jiang <jiangyunshui@kylinos.cn>
Fixes: c38fe1bb5d21 ("Input: cs40l50 - Add support for the CS40L50 haptic driver")
Link: https://lore.kernel.org/r/20250704024010.2353841-1-jiangyunshui@kylinos.cn
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently the driver allows the WiFi chip enter power save mode
by checking the transmitting and receiving traffic is very low
per two seconds. But it's hard for some applications to enter
power save mode, like video streaming, which sends burst traffic
regularly for other side to buffer and only send little traffic
at most time. So adjust the criteria to enter power save while
lower than 10Mbps and check it per 100ms. Thus WiFi chip could
reduce power consumption under these applications.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250701073839.31905-1-pkshih@realtek.com
|
|
Enable compilation of the new rtw89_usb and rtw89_8851bu modules.
Tested mostly in station mode, and a little bit in AP mode.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/4968a9d5-02c8-4d35-a5ad-b75ece8f5d36@gmail.com
|
|
This is the entry point for the new rtw89_8851bu module.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/9d40c265-2982-4073-84a3-d3781defdbca@gmail.com
|
|
Add basic USB support. No TX/RX aggregation, no switching to USB 3 mode.
RTL8851BU and RTL8832BU work.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/f9ad1664-2d63-4a8f-88bf-c7b7bececbfe@gmail.com
|
|
Add various register and bit definitions which will be used by the new
USB driver.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/5812bb0c-20d0-48df-916d-25225eee8132@gmail.com
|
|
Clear some bits in some registers in order to allow RTL8851BU to power
on. This is done both when powering on and when powering off because
that's what the vendor driver does.
Also tested with RTL8832BU and RTL8832CU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/a39da939-d640-4486-ad38-f658f220afc8@gmail.com
|
|
There are a few differences in the power on/off functions between PCIE
and USB.
While the RTL8851BU appears to work without these changes, it's
probably best to implement them, in case they are needed in some
situations.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/469f6882-1859-464d-8a84-9ef1b6c8ce3e@gmail.com
|
|
A few unnecessary error messages are printed when the device is
unplugged. "read swsi busy" in particular can appear ~1000 times when
RTL8851BU is unplugged.
Add a new flag RTW89_FLAG_UNPLUGGED and print some error messages only
when this flag is not set. The new USB driver will set the flag when
the device is unplugged.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/cc18b739-6f38-4c1a-a681-1e2a0d4ed60d@gmail.com
|
|
In the case of USB the TX descriptor is transmitted in the same buffer
as the 802.11 frame, so add the required headroom.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/91fb7579-60e5-4a06-8007-3312639beea6@gmail.com
|
|
Disable deep power saving for USB and SDIO because rtw89_mac_send_rpwm()
is called in atomic context and accessing hardware registers results in
"scheduling while atomic" errors.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/0f49eceb-0de0-47e2-ba36-3c6a0dddd17d@gmail.com
|
|
"hfc" means "hci fc" which is "Host Control Interface Flow Control".
These are some parameters needed for RTL8851BU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/a0dec631-de05-4302-9ef1-e730eb233f08@gmail.com
|
|
Add rtw8851b_dle_mem_usb2 and rtw8851b_dle_mem_usb3 and their various
quotas and sizes in struct rtw89_mac_size_set.
"dle" could be "Data Link Engine" or "Double Link Engine". These are
some parameters needed for RTL8851BU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/91622304-614e-4e91-bf2f-7688cf44070b@gmail.com
|
|
USB and SDIO will need different sets of values, so make hfc_param_ini
in struct rtw89_chip_info an array.
Also make param_ini a pointer instead of copying the struct.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1356f901-9ebf-451e-827f-50dd3efda534@gmail.com
|
|
USB 2, USB 3, and SDIO will need different sets of values compared to
PCIe.
Add a new dle_type member in struct rtw89_hci_info and make dle_mem in
struct rtw89_chip_info an array to hold the four different sets of
values.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/c9152735-dbc4-4473-ae29-a79625cfbf78@gmail.com
|
|
Make rtw8851b_read_efuse() accept USB devices and load the MAC address
from the correct offset.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/6b2a1382-3be4-4038-8005-cf96922e4332@gmail.com
|
|
Update IQK along with TX/RX clock to 960MHz and 1920MHz to improve
performance.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250627035338.16637-1-pkshih@realtek.com
|
|
Update DPK with TX/RX clock to 960MHz and 1920MHz, which improve
performance on certain chips.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250627035328.16577-1-pkshih@realtek.com
|
|
To support new commands in DPK 0x11, update NCTL to version 0xB.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250627035201.16416-5-pkshih@realtek.com
|
|
To get expected result of RF calibration at runtime, adjust ADC setting
ahead for coming changes of RF calibration.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250627035201.16416-4-pkshih@realtek.com
|
|
To handle hardware characteristic of ADC, calibrate the function and add
a efuse field to record result, which driver uses it to set proper value
accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250627035201.16416-3-pkshih@realtek.com
|
|
Originally the type of path_ok is bool to denote that DPK is ready on
certain path and can be enabled. For RTL8851B, hardware design can support
more than one calibration set, so use type u8 instead to record the
hardware set in current use.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250627035201.16416-2-pkshih@realtek.com
|
|
This silences the following coccinelle warning:
WARNING: sum of probable bitmasks, consider |
Compile tested only.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/c68a8642c325f626ac34ccee71d9d9aa69f0c92c.1750733428.git.xiaopei01@kylinos.cn
|
|
There's one case where ->d_compare() can be called for an in-lookup
dentry; usually that's nothing special from ->d_compare() point of
view, but... proc_sys_compare() is weird.
The thing is, /proc/sys subdirectories can look differently for
different processes. Up to and including having the same name
resolve to different dentries - all of them hashed.
The way it's done is ->d_compare() refusing to admit a match unless
this dentry is supposed to be visible to this caller. The information
needed to discriminate between them is stored in inode; it is set
during proc_sys_lookup() and until it's done d_splice_alias() we really
can't tell who should that dentry be visible for.
Normally there's no negative dentries in /proc/sys; we can run into
a dying dentry in RCU dcache lookup, but those can be safely rejected.
However, ->d_compare() is also called for in-lookup dentries, before
they get positive - or hashed, for that matter. In case of match
we will wait until dentry leaves in-lookup state and repeat ->d_compare()
afterwards. In other words, the right behaviour is to treat the
name match as sufficient for in-lookup dentries; if dentry is not
for us, we'll see that when we recheck once proc_sys_lookup() is
done with it.
While we are at it, fix the misspelled READ_ONCE and WRITE_ONCE there.
Fixes: d9171b934526 ("parallel lookups machinery, part 4 (and last)")
Reported-by: NeilBrown <neilb@brown.name>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix chunking the PTE updates and overflowing the maximum number of
dwords with with MI_STORE_DATA_IMM (Jia Yao)
- Move WA BB to the LRC BO to mitigate hangs on context switch (Matthew
Brost)
- Fix frequency/flush WAs for BMG (Vinay / Lucas)
- Fix kconfig prompt title and description (Lucas)
- Do not require kunit (Harry Austen / Lucas)
- Extend 14018094691 WA to BMG (Daniele)
- Fix wedging the device on signal (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/o5662wz6nrlf6xt5sjgxq5oe6qoujefzywuwblm3m626hreifv@foqayqydd6ig
|
|
We've seen customers having shares mounted in paths like /??/C:/ or
/??/UNC/foo.example.com/share in order to get their native SMB
symlinks successfully followed from different mounts.
After commit 12b466eb52d9 ("cifs: Fix creating and resolving absolute NT-style symlinks"),
the client would then convert absolute paths from "/??/C:/" to "/mnt/c/"
by default. The absolute paths would vary depending on the value of
symlinkroot= mount option.
Fix this by restoring old behavior of not trying to convert absolute
paths by default. Only do this if symlinkroot= was _explicitly_ set.
Before patch:
$ mount.cifs //w22-fs0/test2 /mnt/1 -o vers=3.1.1,username=xxx,password=yyy
$ ls -l /mnt/1/symlink2
lrwxr-xr-x 1 root root 15 Jun 20 14:22 /mnt/1/symlink2 -> /mnt/c/testfile
$ mkdir -p /??/C:; echo foo > //??/C:/testfile
$ cat /mnt/1/symlink2
cat: /mnt/1/symlink2: No such file or directory
After patch:
$ mount.cifs //w22-fs0/test2 /mnt/1 -o vers=3.1.1,username=xxx,password=yyy
$ ls -l /mnt/1/symlink2
lrwxr-xr-x 1 root root 15 Jun 20 14:22 /mnt/1/symlink2 -> '/??/C:/testfile'
$ mkdir -p /??/C:; echo foo > //??/C:/testfile
$ cat /mnt/1/symlink2
foo
Cc: linux-cifs@vger.kernel.org
Reported-by: Pierguido Lambri <plambri@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes: 12b466eb52d9 ("cifs: Fix creating and resolving absolute NT-style symlinks")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
timing
When the SMB server reboots and the client immediately accesses the mount
point, a race condition can occur that causes operations to fail with
"Host is down" error.
Reproduction steps:
# Mount SMB share
mount -t cifs //192.168.245.109/TEST /mnt/ -o xxxx
ls /mnt
# Reboot server
ssh root@192.168.245.109 reboot
ssh root@192.168.245.109 /path/to/cifs_server_setup.sh
ssh root@192.168.245.109 systemctl stop firewalld
# Immediate access fails
ls /mnt
ls: cannot access '/mnt': Host is down
# But works if there is a delay
The issue is caused by a race condition between negotiate and reconnect.
The 20-second negotiate timeout mechanism can interfere with the normal
recovery process when both are triggered simultaneously.
ls cifsd
---------------------------------------------------
cifs_getattr
cifs_revalidate_dentry
cifs_get_inode_info
cifs_get_fattr
smb2_query_path_info
smb2_compound_op
SMB2_open_init
smb2_reconnect
cifs_negotiate_protocol
smb2_negotiate
cifs_send_recv
smb_send_rqst
wait_for_response
cifs_demultiplex_thread
cifs_read_from_socket
cifs_readv_from_socket
server_unresponsive
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->mid_state = MID_RETRY_NEEDED
cifs_wake_up_task
cifs_sync_mid_result
// case MID_RETRY_NEEDED
rc = -EAGAIN;
// In smb2_negotiate()
rc = -EHOSTDOWN;
The server_unresponsive() timeout triggers cifs_reconnect(), which aborts
ongoing mid requests and causes the ls command to receive -EAGAIN, leading
to -EHOSTDOWN.
Fix this by introducing a dedicated `neg_start` field to
precisely tracks when the negotiate process begins. The timeout check
now uses this accurate timestamp instead of `lstrp`, ensuring that:
1. Timeout is only triggered after negotiate has actually run for 20s
2. The mechanism doesn't interfere with concurrent recovery processes
3. Uninitialized timestamps (value 0) don't trigger false timeouts
Fixes: 7ccc1465465d ("smb: client: fix hang in wait_for_response() for negproto")
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
- Fixed raw pointer leakage and unsafe behavior in printk()
. Switch from %pK to %p for pointer formatting, as %p is now safer
and prevents issues like raw pointer leakage and acquiring sleeping
locks in atomic contexts.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20250629091742.29956-1-inki.dae@samsung.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Fixups
- Fixed raw pointer leakage and unsafe behavior in printk()
. Switch from %pK to %p for pointer formatting, as %p is now safer
and prevents issues like raw pointer leakage and acquiring sleeping
locks in atomic contexts.
- Fixed kernel panic during boot
. A NULL pointer dereference issue occasionally occurred
when the vblank interrupt handler was called before
the DRM driver was fully initialized during boot.
So this patch fixes the issue by adding a check in the interrupt handler
to ensure the DRM driver is properly initialized.
- Fixed a lockup issue on Samsung Peach-Pit/Pi Chromebooks
. The issue occurred after commit c9b1150a68d9 changed
the call order of CRTC enable/disable and bridge pre_enable/post_disable
methods, causing fimd_dp_clock_enable() to be called
before the FIMD device was activated. To fix this,
runtime PM guards were added to fimd_dp_clock_enable()
to ensure proper operation even when CRTC is not enabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20250629083554.28628-1-inki.dae@samsung.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Make mei interrupt top half irq disabled to fix RT builds
- Fix timeline left held on VMA alloc error
- Fix NULL pointer deref in vlv_dphy_param_init()
- Fix selftest mock_request() to avoid NULL deref
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aGYVPAA4KvsZqDFx@jlahtine-mobl
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc5:
- Replace simple panel lookup hack with proper fix.
- nullpointer deref in vesadrm fix.
- fix dma_resv_wait_timeout.
- fix error handling in ttm_buffer_object_transfer.
- bridge fixes.
- Fix vmwgfx accidentally allocating encrypted memory.
- Fix race in spsc_queue_push()
- Add refcount on backing GEM objects during fb creation.
- Fix v3d irq's being enabled during gpu reset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/a7461418-08dc-4b7c-b2fa-264155f66d5e@linux.intel.com
|
|
In drm::Device::new() we allocate with __drm_dev_alloc() and return an
ARef<drm::Device>.
When the reference count of the drm::Device falls to zero, the C code
automatically calls drm_dev_release(), which eventually frees the memory
allocated in drm::Device::new().
However, due to that, drm::Device::drop() is never called. As a result
the destructor of the user's private data, i.e. drm::Device::data is
never called. Hence, fix this by calling drop_in_place() from the DRM
device's release callback.
Fixes: 1e4b8896c0f3 ("rust: drm: add device abstraction")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250629153747.72536-1-dakr@kernel.org
|
|
soc-button-array hardcodes a debounce value by means of gpio_keys
which uses pinctrl-amd as a backend to program debounce for a GPIO.
This hardcoded value doesn't match what the firmware intended to be
programmed in _AEI. The hardcoded debounce leads to problems waking
from suspend. There isn't appetite to conditionalize the behavior in
soc-button-array or gpio-keys so clear it when the system suspends to
avoid problems with being able to resume.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hans de Goede <hansg@kernel.org>
Fixes: 5c4fa2a6da7fb ("Input: soc_button_array - debounce the buttons")
Link: https://lore.kernel.org/linux-input/mkgtrb5gt7miyg6kvqdlbu4nj3elym6ijudobpdi26gp4xxay5@rsa6ytrjvj2q/
Link: https://lore.kernel.org/linux-input/20250625215813.3477840-1-superm1@kernel.org/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/20250627150155.3311574-1-superm1@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This fixes a bunch of command hangs after runtime suspend/resume.
This fixes a regression caused by code movement in the commit below,
the commit seems to just change timings enough to cause this to happen
now, and adding the sleep seems to avoid it.
I've spent some time trying to root cause it to no great avail,
it seems like a bug on the firmware side, but it could be a bug
in our rpc handling that I can't find.
Either way, we should land the workaround to fix the problem,
while we continue to work out the root cause.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Fixes: c21b039715ce ("drm/nouveau/gsp: add hals for fbsr.suspend/resume()")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250702232707.175679-1-airlied@gmail.com
|
|
If CONFIG_DEBUG_FS is enabled, nouveau_drm_init() returns an error if it
fails to create the "nouveau" directory in debugfs. One case where that
will happen is when debugfs access is restricted by
CONFIG_DEBUG_FS_ALLOW_NONE or by the boot parameter debugfs=off, which
cause the debugfs APIs to return -EPERM.
So just ignore errors from debugfs. Note that nouveau_debugfs_root may
be an error now, but that is a standard pattern for debugfs. From
include/linux/debugfs.h:
"NOTE: it's expected that most callers should _ignore_ the errors
returned by this function. Other debugfs functions handle the fact that
the "dentry" passed to them could be an error and they don't crash in
that case. Drivers should generally work fine even if debugfs fails to
init anyway."
Fixes: 97118a1816d2 ("drm/nouveau: create module debugfs root")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Thompson <dev@aaront.org>
Acked-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250703211949.9916-1-dev@aaront.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- tree-log fixes:
- fixes of log tracking of directories and subvolumes
- fix iteration and error handling of inode references
during log replay
- fix free space tree rebuild (reported by syzbot)
* tag 'for-6.16-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: use btrfs_record_snapshot_destroy() during rmdir
btrfs: propagate last_unlink_trans earlier when doing a rmdir
btrfs: record new subvolume in parent dir earlier to avoid dir logging races
btrfs: fix inode lookup error handling during log replay
btrfs: fix iteration of extrefs during log replay
btrfs: fix missing error handling when searching for inode refs during log replay
btrfs: fix failure to rebuild free space tree using multiple transactions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Driver fixes plus core sd.c fix are all small and obvious.
The larger change to hosts.c is less obvious, but required to avoid
data corruption caused by bio splitting"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix spelling of a sysfs attribute name
scsi: core: Enforce unlimited max_segment_size when virt_boundary_mask is set
scsi: RDMA/srp: Don't set a max_segment_size when virt_boundary_mask is set
scsi: sd: Fix VPD page 0xb7 length check
scsi: qla4xxx: Fix missing DMA mapping error in qla4xxx_alloc_pdu()
scsi: qla2xxx: Fix DMA mapping test in qla24xx_get_port_database()
|
|
Commit 88c02b3f79a6 ("s390/sha3: Support sha3 performance enhancements")
added the field s390_sha_ctx::first_message_part and made it be used by
s390_sha_update() (now s390_sha_update_blocks()). At the time,
s390_sha_update() was used by all the s390 SHA-1, SHA-2, and SHA-3
algorithms. However, only the initialization functions for SHA-3 were
updated, leaving SHA-1 and SHA-2 using first_message_part uninitialized.
This could cause e.g. the function code CPACF_KIMD_SHA_512 |
CPACF_KIMD_NIP to be used instead of just CPACF_KIMD_SHA_512. This
apparently was harmless, as the SHA-1 and SHA-2 function codes ignore
CPACF_KIMD_NIP; it is recognized only by the SHA-3 function codes
(https://lore.kernel.org/r/73477fe9-a1dc-4e38-98a6-eba9921e8afa@linux.ibm.com/).
Therefore, this bug was found only when first_message_part was later
converted to a boolean and UBSAN detected its uninitialized use.
Regardless, let's fix this by just initializing to zero.
Note: in 6.16, we need to patch SHA-1, SHA-384, and SHA-512. In 6.15
and earlier, we'll also need to patch SHA-224 and SHA-256, as they
hadn't yet been librarified (which incidentally fixed this bug).
Fixes: 88c02b3f79a6 ("s390/sha3: Support sha3 performance enhancements")
Cc: stable@vger.kernel.org
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Closes: https://lore.kernel.org/r/12740696-595c-4604-873e-aefe8b405fbf@linux.ibm.com
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250703172316.7914-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The ssid->ssids[] and sreq->ssids[] arrays have MT7925_RNR_SCAN_MAX_BSSIDS
elements so this >= needs to be > to prevent an out of bounds access.
Fixes: 8284815ca161 ("wifi: mt76: mt7925: add RNR scan support for 6GHz")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVT2tPhG_8T0Qla@stanley.mountain
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Restart the MCU and release the patch semaphore before loading the MCU
patch firmware from the host.
This fixes failures upon error recovery in case the semaphore was
previously taken and never released by the host.
This happens from time to time upon triggering a full-chip error
recovery. Under this circumstance, the hardware restart fails and the
radio is rendered inoperational.
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://patch.msgid.link/20250402004528.1036715-3-mail@david-bauer.net
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The default timeout set in mt76_connac2_mcu_fill_message of 20 seconds
leads to excessive stalling in case messages are lost.
Testing showed that a smaller timeout of 5 seconds is sufficient in
normal operation.
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://patch.msgid.link/20250402004528.1036715-1-mail@david-bauer.net
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Increase the timeout for MCU_EXT_CMD_EFUSE_BUFFER_MODE command.
Regular retries upon hardware-recovery have been observed. Increasing
the timeout slightly remedies this problem.
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://patch.msgid.link/20250402004528.1036715-2-mail@david-bauer.net
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add `tx_timeout_count` to ethtool statistics to provide visibility into
transmit timeout events, bringing igbvf in line with other Intel
ethernet drivers.
Currently `tx_timeout_count` is incremented in igbvf_watchdog_task() and
igbvf_tx_timeout() but is not exposed to userspace nor used elsewhere in
the driver.
Before:
# ethtool -S ens5 | grep tx
tx_packets: 43
tx_bytes: 4408
tx_restart_queue: 0
After:
# ethtool -S ens5 | grep tx
tx_packets: 41
tx_bytes: 4241
tx_restart_queue: 0
tx_timeout_count: 0
Tested-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove `int_counter0` and `int_counter1` from struct igbvf_adapter since
they are only incremented in interrupt handlers igbvf_intr_msix_rx() and
igbvf_msix_other(), but never read or used anywhere in the driver.
Note that igbvf_intr_msix_tx() does not have similar counter increments,
suggesting that these were likely overlooked during development.
Eliminate the fields and their unnecessary accesses in interrupt
handlers.
Tested-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Correct spelling as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Modifying SRRCTL register can generate MDD event.
Turn MDD off during SRRCTL register write to prevent generating MDD.
Fix RCT in ixgbe_set_rx_drop_en().
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add Tx Hang detection due to an unhandled MDD Event.
Previously, a malicious VF could disable the entire port causing
TX to hang on the E610 card.
Those events that caused PF to freeze were not detected
as an MDD event and usually required a Tx Hang watchdog timer
to catch the suspension, and perform a physical function reset.
Implement flows in the affected PF driver in such a way to check
the cause of the hang, detect it as an MDD event and log an
entry of the malicious VF that caused the Hang.
The PF blocks the malicious VF, if it continues to be the source
of several MDD events.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
