summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-17x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0Leonardo Bras
During host/guest switch (like in kvm_arch_vcpu_ioctl_run()), the kernel swaps the fpu between host/guest contexts, by using fpu_swap_kvm_fpstate(). When xsave feature is available, the fpu swap is done by: - xsave(s) instruction, with guest's fpstate->xfeatures as mask, is used to store the current state of the fpu registers to a buffer. - xrstor(s) instruction, with (fpu_kernel_cfg.max_features & XFEATURE_MASK_FPSTATE) as mask, is used to put the buffer into fpu regs. For xsave(s) the mask is used to limit what parts of the fpu regs will be copied to the buffer. Likewise on xrstor(s), the mask is used to limit what parts of the fpu regs will be changed. The mask for xsave(s), the guest's fpstate->xfeatures, is defined on kvm_arch_vcpu_create(), which (in summary) sets it to all features supported by the cpu which are enabled on kernel config. This means that xsave(s) will save to guest buffer all the fpu regs contents the cpu has enabled when the guest is paused, even if they are not used. This would not be an issue, if xrstor(s) would also do that. xrstor(s)'s mask for host/guest swap is basically every valid feature contained in kernel config, except XFEATURE_MASK_PKRU. Accordingto kernel src, it is instead switched in switch_to() and flush_thread(). Then, the following happens with a host supporting PKRU starts a guest that does not support it: 1 - Host has XFEATURE_MASK_PKRU set. 1st switch to guest, 2 - xsave(s) fpu regs to host fpustate (buffer has XFEATURE_MASK_PKRU) 3 - xrstor(s) guest fpustate to fpu regs (fpu regs have XFEATURE_MASK_PKRU) 4 - guest runs, then switch back to host, 5 - xsave(s) fpu regs to guest fpstate (buffer now have XFEATURE_MASK_PKRU) 6 - xrstor(s) host fpstate to fpu regs. 7 - kvm_vcpu_ioctl_x86_get_xsave() copy guest fpstate to userspace (with XFEATURE_MASK_PKRU, which should not be supported by guest vcpu) On 5, even though the guest does not support PKRU, it does have the flag set on guest fpstate, which is transferred to userspace via vcpu ioctl KVM_GET_XSAVE. This becomes a problem when the user decides on migrating the above guest to another machine that does not support PKRU: the new host restores guest's fpu regs to as they were before (xrstor(s)), but since the new host don't support PKRU, a general-protection exception ocurs in xrstor(s) and that crashes the guest. This can be solved by making the guest's fpstate->user_xfeatures hold a copy of guest_supported_xcr0. This way, on 7 the only flags copied to userspace will be the ones compatible to guest requirements, and thus there will be no issue during migration. As a bonus, it will also fail if userspace tries to set fpu features (with the KVM_SET_XSAVE ioctl) that are not compatible to the guest configuration. Such features will never be returned by KVM_GET_XSAVE or KVM_GET_XSAVE2. Also, since kvm_vcpu_after_set_cpuid() now sets fpstate->user_xfeatures, there is not need to set it in kvm_check_cpuid(). So, change fpstate_realloc() so it does not touch fpstate->user_xfeatures if a non-NULL guest_fpu is passed, which is the case when kvm_check_cpuid() calls it. Signed-off-by: Leonardo Bras <leobras@redhat.com> Message-Id: <20220217053028.96432-2-leobras@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-17tps6598x: clear int mask on probe failureJens Axboe
The interrupt mask is enabled before any potential failure points in the driver, which can leave a failure path where we exit with interrupts enabled but the device not live. This causes an infinite stream of interrupts on an Apple M1 Pro laptop on USB-C. Add a failure label that's used post enabling interrupts, where we mask them again before returning an error. Suggested-by: Sven Peter <sven@svenpeter.dev> Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/e6b80669-20f3-06e7-9ed5-8951a9c6db6f@kernel.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17ping: fix the dif and sdif check in ping_lookupXin Long
When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" There is another regression caused when matching sk_bound_dev_if and dif, RAW socket is using inet_iif() while PING socket lookup is using skb->dev->ifindex, the cmd below fails due to this: # ip link add dummy0 type dummy # ip link set dummy0 up # ip addr add 192.168.111.1/24 dev dummy0 # ping -I dummy0 192.168.111.1 -c1 The issue was also reported on: https://github.com/iputils/iputils/issues/104 But fixed in iputils in a wrong way by not binding to device when destination IP is on device, and it will cause some of kselftests to fail, as Jianlin noticed. This patch is to use inet(6)_iif and inet(6)_sdif to get dif and sdif for PING socket, and keep consistent with RAW socket. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17block/wbt: fix negative inflight counter when remove scsi deviceLaibin Qiu
Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in wbt_disable_default() when switch elevator to bfq. And when we remove scsi device, wbt will be enabled by wbt_enable_default. If it become false positive between wbt_wait() and wbt_track() when submit write request. The following is the scenario that triggered the problem. T1 T2 T3 elevator_switch_mq bfq_init_queue wbt_disable_default <= Set rwb->enable_state (OFF) Submit_bio blk_mq_make_request rq_qos_throttle <= rwb->enable_state (OFF) scsi_remove_device sd_remove del_gendisk blk_unregister_queue elv_unregister_queue wbt_enable_default <= Set rwb->enable_state (ON) q_qos_track <= rwb->enable_state (ON) ^^^^^^ this request will mark WBT_TRACKED without inflight add and will lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung. Fix this by move wbt_enable_default() from elv_unregister to bfq_exit_queue(). Only re-enable wbt when bfq exit. Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly") Remove oneline stale comment, and kill one oneshot local variable. Signed-off-by: Ming Lei <ming.lei@rehdat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/linux-block/20211214133103.551813-1-qiulaibin@huawei.com/ Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-17block: fix surprise removal for drivers calling blk_set_queue_dyingChristoph Hellwig
Various block drivers call blk_set_queue_dying to mark a disk as dead due to surprise removal events, but since commit 8e141f9eb803 that doesn't work given that the GD_DEAD flag needs to be set to stop I/O. Replace the driver calls to blk_set_queue_dying with a new (and properly documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the only remaining caller. Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-17block-map: add __GFP_ZERO flag for alloc_page in function bio_copy_kernHaimin Zhang
Add __GFP_ZERO flag for alloc_page in function bio_copy_kern to initialize the buffer of a bio. Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220216084038.15635-1-tcs.kernel@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-17kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup modeAnton Romanov
If vcpu has tsc_always_catchup set each request updates pvclock data. KVM_HC_CLOCK_PAIRING consumers such as ptp_kvm_x86 rely on tsc read on host's side and do hypercall inside pvclock_read_retry loop leading to infinite loop in such situation. v3: Removed warn Changed return code to KVM_EFAULT v2: Added warn Signed-off-by: Anton Romanov <romanton@google.com> Message-Id: <20220216182653.506850-1-romanton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-17KVM: Fix lockdep false negative during host resumeWanpeng Li
I saw the below splatting after the host suspended and resumed. WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm] CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4 RIP: 0010:kvm_resume+0x2c/0x30 [kvm] Call Trace: <TASK> syscore_resume+0x90/0x340 suspend_devices_and_enter+0xaee/0xe90 pm_suspend.cold+0x36b/0x3c2 state_store+0x82/0xf0 kernfs_fop_write_iter+0x1b6/0x260 new_sync_write+0x258/0x370 vfs_write+0x33f/0x510 ksys_write+0xc9/0x160 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae lockdep_is_held() can return -1 when lockdep is disabled which triggers this warning. Let's use lockdep_assert_not_held() which can detect incorrect calls while holding a lock and it also avoids false negatives when lockdep is disabled. Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-17KVM: x86: Add KVM_CAP_ENABLE_CAP to x86Aaron Lewis
Follow the precedent set by other architectures that support the VCPU ioctl, KVM_ENABLE_CAP, and advertise the VM extension, KVM_CAP_ENABLE_CAP. This way, userspace can ensure that KVM_ENABLE_CAP is available on a vcpu before using it. Fixes: 5c919412fe61 ("kvm/x86: Hyper-V synthetic interrupt controller") Signed-off-by: Aaron Lewis <aaronlewis@google.com> Message-Id: <20220214212950.1776943-1-aaronlewis@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-17net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990Daniele Palmas
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990 0x1071 composition in order to avoid bind error. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17drm/i915/lrc: replace include with forward declarationsJani Nikula
Prefer forward declarations over includes if possible. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214173810.2108975-2-jani.nikula@intel.com
2022-02-17drm/i915/lrc: move lrc_get_runtime() to intel_lrc.cJani Nikula
Move the static inline next to the only caller. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214173810.2108975-1-jani.nikula@intel.com
2022-02-17perf bpf: Defer freeing string after possible strlen() on itArnaldo Carvalho de Melo
This was detected by the gcc in Fedora Rawhide's gcc: 50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC) inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9: util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free] 1225 | *key_scan_pos += strlen(map_opt); | ^~~~~~~~~~~~~~~ util/bpf-loader.c:1223:9: note: call to 'free' here 1223 | free(map_name); | ^~~~~~~~~~~~~~ cc1: all warnings being treated as errors So do the calculations on the pointer before freeing it. Fixes: 04f9bf2bac72480c ("perf bpf-loader: Add missing '*' for key_scan_pos") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-17Merge tag 'amd-drm-fixes-5.17-2022-02-16' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.17-2022-02-16: amdgpu: - Stable pstate clock fixes for Dimgrey Cavefish and Beige Goby - S0ix SDMA fix - Yellow Carp GPU reset fix radeon: - Backlight fix for iMac 12,1 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217035242.8084-1-alexander.deucher@amd.com
2022-02-17ASoC: intel: skylake: Set max DMA segment sizeTakashi Iwai
The recent code refactoring to use the standard DMA helper requires the max DMA segment size setup for SG list management. Without it, the kernel may spew warnings when a large buffer is allocated. This patch sets up dma_set_max_seg_size() for avoiding spurious warnings. Fixes: 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)") Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> BugLink: https://github.com/thesofproject/linux/issues/3430 Link: https://lore.kernel.org/r/20220215132756.31236-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-02-17ASoC: SOF: hda: Set max DMA segment sizeTakashi Iwai
The recent code refactoring to use the standard DMA helper requires the max DMA segment size setup for SG list management. Without it, the kernel may spew warnings when a large buffer is allocated. This patch sets up dma_set_max_seg_size() for avoiding spurious warnings. Fixes: 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)") Acked-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> BugLink: https://github.com/thesofproject/linux/issues/3430 Link: https://lore.kernel.org/r/20220215132756.31236-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-02-17ALSA: hda: Set max DMA segment sizeTakashi Iwai
The recent code refactoring to use the standard DMA helper requires the max DMA segment size setup for SG list management. Without it, the kernel may spew warnings when a large buffer is allocated. This patch sets up dma_set_max_seg_size() for avoiding spurious warnings. Fixes: 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)") Cc: <stable@vger.kernel.org> BugLink: https://github.com/thesofproject/linux/issues/3430 Link: https://lore.kernel.org/r/20220215132756.31236-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-02-17drm/i915/perf: Skip the i915_perf_init for dg2Ramalingam C
i915_perf is not enabled for dg2 yet, hence skip the feature initialization. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220215053115.6023-1-ramalingam.c@intel.com
2022-02-17drm/i915/fbdev: hide struct intel_fbdev in intel_fbdev.cJani Nikula
As all access to struct intel_fbdev guts is nicely stowed away in intel_fbdev.c, we can hide the struct definition there too. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220215122957.2755529-2-jani.nikula@intel.com
2022-02-17drm/i915/fbdev: add intel_fbdev_framebuffer() helperJani Nikula
Wrap accessing struct intel_fbdev guts in a helper. v2: s/intel_fbdev_to_framebuffer/intel_fbdev_framebuffer/g (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220215122957.2755529-1-jani.nikula@intel.com
2022-02-17drm/i915: fix build issue when using clangTong Zhang
drm/i915 adds some extra cflags, namely -Wall, which causes instances of -Wformat-security to appear when building with clang, even though this warning is turned off kernel-wide in the main Makefile: drivers/gpu/drm/i915/gt/intel_gt.c:983:2: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security] GEM_TRACE("ERROR\n"); ^~~~~~~~~~~~~~~~~~~~ ./drivers/gpu/drm/i915/i915_gem.h:76:24: note: expanded from macro 'GEM_TRACE' #define GEM_TRACE(...) trace_printk(__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/kernel.h:369:3: note: expanded from macro 'trace_printk' do_trace_printk(fmt, ##__VA_ARGS__); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/kernel.h:383:30: note: expanded from macro 'do_trace_printk' __trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \ ^~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_gt.c:983:2: note: treat the string as an argument to avoid this This does not happen with GCC because it does not enable -Wformat-security with -Wall. Disable -Wformat-security within the i915 Makefile so that these warnings do not show up with clang. Signed-off-by: Tong Zhang <ztong0001@gmail.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214195821.29809-1-ztong0001@gmail.com
2022-02-17drm/i915/gvt: #include drm_edid.h for drm_edid_block_valid()Jani Nikula
As the excessive #includes from i915_drv.h were axed, kvmgt.c build started failing. Add the necessary #include where needed. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 14da21cc4671 ("drm/i915: axe lots of unnecessary includes from i915_drv.h") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: intel-gvt-dev@lists.freedesktop.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220215122030.2741656-1-jani.nikula@intel.com
2022-02-17drm/tegra: Fix cast to restricted __le32Jon Hunter
Sparse warns about the following cast in the function falcon_copy_firmware_image() ... drivers/gpu/drm/tegra/falcon.c:66:27: warning: cast to restricted __le32 Fix this by casting the firmware data array to __le32 instead of u32. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-02-17Merge tag 'mediatek-drm-fixes-5.17' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.17 1. Avoid EPROBE_DEFER loop with external bridge Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/1645027727-19554-1-git-send-email-chunkuang.hu@kernel.org
2022-02-16net: sched: limit TC_ACT_REPEAT loopsEric Dumazet
We have been living dangerously, at the mercy of malicious users, abusing TC_ACT_REPEAT, as shown by this syzpot report [1]. Add an arbitrary limit (32) to the number of times an action can return TC_ACT_REPEAT. v2: switch the limit to 32 instead of 10. Use net_warn_ratelimited() instead of pr_err_once(). [1] (C repro available on demand) rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0 (t=10502 jiffies g=5305 q=190) rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 rcu: Possible timer handling issue on cpu=0 timer-softirq=3527 rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:29344 pid: 14 ppid: 2 flags:0x00004000 Call Trace: <TASK> context_switch kernel/sched/core.c:4986 [inline] __schedule+0xab2/0x4db0 kernel/sched/core.c:6295 schedule+0xd2/0x260 kernel/sched/core.c:6368 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline] RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline] RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline] RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508 Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c <f3> 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84 RSP: 0018:ffffc9000283f1b0 EFLAGS: 00000206 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 1ffff1100fc0071e RDX: 0000000000000001 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff88807e0038f0 R08: 0000000000000001 R09: ffffffff8ffbf9ff R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000004c1e R13: ffffed100fc0071e R14: 0000000000000001 R15: ffff8880b9c3aa80 FS: 00005555562bf300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdbfef12b8 CR3: 00000000723c2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline] queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline] queued_spin_lock include/asm-generic/qspinlock.h:85 [inline] do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:354 [inline] sch_tree_lock include/net/sch_generic.h:610 [inline] sch_tree_lock include/net/sch_generic.h:605 [inline] prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211 prio_init+0x5c/0x80 net/sched/sch_prio.c:244 qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7ee98aae99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdbfef12d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffdbfef1300 RCX: 00007f7ee98aae99 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 000000000000000d R11: 0000000000000246 R12: 00007ffdbfef12f0 R13: 00000000000f4240 R14: 000000000004ca47 R15: 00007ffdbfef12e4 </TASK> INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs NMI backtrace for cpu 1 CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: mld mld_ifc_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:604 [inline] check_cpu_stall kernel/rcu/tree_stall.h:688 [inline] rcu_pending kernel/rcu/tree.c:3919 [inline] rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286 Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b RSP: 0018:ffffc90002c5eea8 EFLAGS: 00000246 RAX: 0000000000000007 RBX: ffff88801c625800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: ffff8880137d3100 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff874fcd88 R11: 0000000000000000 R12: ffff88801d692dc0 R13: ffff8880137d3104 R14: 0000000000000000 R15: ffff88801d692de8 tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256 tcf_action_exec net/sched/act_api.c:1049 [inline] tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026 tcf_exts_exec include/net/pkt_cls.h:326 [inline] route4_classify+0xef0/0x1400 net/sched/cls_route.c:179 __tcf_classify net/sched/cls_api.c:1549 [inline] tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615 prio_classify net/sched/sch_prio.c:42 [inline] prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668 __dev_xmit_skb net/core/dev.c:3756 [inline] __dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:306 [inline] __ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288 ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0x196/0x310 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126 iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82 geneve_xmit_skb drivers/net/geneve.c:966 [inline] geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one net/core/dev.c:3473 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489 __dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826 mld_send_cr net/ipv6/mcast.c:2127 [inline] mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ---------------- Code disassembly (best guess): 0: 48 89 eb mov %rbp,%rbx 3: c6 45 01 01 movb $0x1,0x1(%rbp) 7: 41 bc 00 80 00 00 mov $0x8000,%r12d d: 48 c1 e9 03 shr $0x3,%rcx 11: 83 e3 07 and $0x7,%ebx 14: 41 be 01 00 00 00 mov $0x1,%r14d 1a: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 21: fc ff df 24: 4c 8d 2c 01 lea (%rcx,%rax,1),%r13 28: eb 0c jmp 0x36 * 2a: f3 90 pause <-- trapping instruction 2c: 41 83 ec 01 sub $0x1,%r12d 30: 0f 84 72 04 00 00 je 0x4a8 36: 41 0f b6 45 00 movzbl 0x0(%r13),%eax 3b: 38 d8 cmp %bl,%al 3d: 7f 08 jg 0x47 3f: 84 .byte 0x84 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220215235305.3272331-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16tipc: fix wrong notification node addressesJon Maloy
The previous bug fix had an unfortunate side effect that broke distribution of binding table entries between nodes. The updated tipc_sock_addr struct is also used further down in the same function, and there the old value is still the correct one. Fixes: 032062f363b4 ("tipc: fix wrong publisher node address in link publications") Signed-off-by: Jon Maloy <jmaloy@redhat.com> Link: https://lore.kernel.org/r/20220216020009.3404578-1-jmaloy@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16net: dsa: lantiq_gswip: fix use after free in gswip_remove()Alexey Khoroshilov
of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 0d120dfb5d67 ("net: dsa: lantiq_gswip: don't use devres for mdiobus") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1644921768-26477-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16ipv6: per-netns exclusive flowlabel checksWillem de Bruijn
Ipv6 flowlabels historically require a reservation before use. Optionally in exclusive mode (e.g., user-private). Commit 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist") introduced a fastpath that avoids this check when no exclusive leases exist in the system, and thus any flowlabel use will be granted. That allows skipping the control operation to reserve a flowlabel entirely. Though with a warning if the fast path fails: This is an optimization. Robust applications still have to revert to requesting leases if the fast path fails due to an exclusive lease. Still, this is subtle. Better isolate network namespaces from each other. Flowlabels are per-netns. Also record per-netns whether exclusive leases are in use. Then behavior does not change based on activity in other netns. Changes v2 - wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled Fixes: 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist") Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/ Reported-by: Congyu Liu <liu3101@purdue.edu> Signed-off-by: Willem de Bruijn <willemb@google.com> Tested-by: Congyu Liu <liu3101@purdue.edu> Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16net: bridge: multicast: notify switchdev driver whenever MC processing gets ↵Oleksandr Mazur
disabled Whenever bridge driver hits the max capacity of MDBs, it disables the MC processing (by setting corresponding bridge option), but never notifies switchdev about such change (the notifiers are called only upon explicit setting of this option, through the registered netlink interface). This could lead to situation when Software MDB processing gets disabled, but this event never gets offloaded to the underlying Hardware. Fix this by adding a notify message in such case. Fixes: 147c1e9b902c ("switchdev: bridge: Offload multicast disabled") Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20220215165303.31908-1-oleksandr.mazur@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16cifs: fix confusing unneeded warning message on smb2.1 and earlierSteve French
When mounting with SMB2.1 or earlier, even with nomultichannel, we log the confusing warning message: "CIFS: VFS: multichannel is not supported on this protocol version, use 3.0 or above" Fix this so that we don't log this unless they really are trying to mount with multichannel. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215608 Reported-by: Kim Scarborough <kim@scarborough.kim> Cc: stable@vger.kernel.org # 5.11+ Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-02-16drm/amdgpu/gfx10: Add GC 10.3.7 SupportPrike Liang
Needed to properly initialize GC 10.3.7. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdkfd: Replace zero-length array with flexible-array memberFelix Kuehling
Reference: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays CC: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdgpu/sdma5.2: add support for SDMA 5.2.7Prike Liang
Initialize SDMA engine firmware loading. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/pm: Add support for MP1 13.0.8Prike Liang
Set smu sw function and enable swSMU support for MP1. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdgpu/psp: Add support for MP0 13.0.8Prike Liang
Set psp sw funcs callback and firmware loading for MP0. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdgpu/gmc10: add support for GC 10.3.7Prike Liang
Set gfxhub function and configure VM for GC block. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdgpu: update vcn/jpeg PG flags for VCN 3.1.1Sathishkumar S
update vcn and jpeg power gating flags for VCN 3.1.1 Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdgpu: set new revision id for 10.3.7 GCPrike Liang
Add new revision ID for GC 10.3.7 and set cg/pg flags. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdgpu/discovery: set sw common init for GC 10.3.7Prike Liang
Set nv_common_ip_block for GC 10.3.7. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdgpu/discovery: Add 13.0.9 SMUIO blockPrike Liang
Add SMUIO sw function for the new SMUIO block. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd: smu7: downgrade voltage error to infoMario Limonciello
The message `Voltage value looks like a Leakage ID but it's not patched` shows up as an error on Dell Precision 3540. This doesn't cause functional problems and should be downgraded to info. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1162 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdgpu/discovery: add nbio sw func for 7.5.1 nbioPrike Liang
add nbio sw func for the new 7.5.1 nbio block. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdgpu: make cyan skillfish support code more consistentAlex Deucher
Since this is an existing asic, adjust the code to follow the same logic as previously so the driver state is consistent. No functional change intended. Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: For vblank_disable_immediate, check PSR is really usedMichel Dänzer
Even if PSR is allowed for a present GPU, there might be no eDP link which supports PSR. Fixes: 708978487304 ("drm/amdgpu/display: Only set vblank_disable_immediate when PSR is not enabled") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdkfd: add return value check for queue evictionTao Zhou
Otherwise gpu reset will be triggered unconditionally in poison consumption. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdkfd: Replace zero-length array with flexible-array memberChangcheng Deng
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members" for these cases. The older style of one-element or zero-length arrays should no longer be used. Reference: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: Add dsc pre-validation in atomic checkRoman Li
[Why] The previous change: "Add affected crtcs to atomic state for dsc mst unplug" forces modeset on all added crctc regardless whether timing changed or not. Per our implementation of dsc we need modeset only if timing changed. Otherwise dsc can be programmed incorrectly leading to dsc engine hang. [How] During atomic_check pre-compute dsc params. Only set mode_changed if timing is changed. Reviewed-by: Hersen Wu <hersenwu@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amdgpu: Fix wait for RLCG command completionVictor Skvortsov
if (!(tmp & flag)) condition will always evaluate to true when the flag is 0x0 (AMDGPU_RLCG_GC_WRITE). Instead check that address bits are cleared to determine whether the command is complete. Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Tested-by: Bokun Zhang <bokun.zhang@amd.com> Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: add dsc mst stream pbn log for debugHersen Wu
[why] payload and slot number of display on dsc mst hub will be adjusted when there is change on any display on dsc hub. to monitor dsc enable/disable, pbn change, we need add log. [How] add mst_pbn to dc_dsc_config of dc_crtc_timing. add dsc, pbn, display name within dc_core_enable_stream, dc_core_disable_stream, dc_stream_log Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: 3.2.173Aric Cyr
This version brings along the following fixes: -Fixes bugs for dsc mst hub -Enables 29 denial itnerface by default -Fixes dmub outbox notificatoin Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 14:40:08 +0000