summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-03regulator: stm32-pwr: Remove unneeded .min_uV and .list_volageAxel Lin
For fixed regulator, setting .n_voltages = 1 and .fixed_uV is enough, no need to set .min_uV and .list_volage. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-03regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_regAxel Lin
Just use rdev->desc instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-03regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulatorsAxel Lin
Slightly better readability by setting fixed_uV instead of min_uV. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-03regulator: ab3100: Constify regulator_ops and ab3100_regulator_descAxel Lin
These regulator_ops variables and ab3100_regulator_desc array never need to be modified, make them const so compiler can put them to .rodata. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-03regulator: pv880x0: Switch to SPDX identifierAxel Lin
Convert Powerventure Semiconductor PV88060/PV88080/PV88090 regulator drivers to SPDX identifier. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-03crypto: ccree - use a proper le32 type for le32 valGilad Ben-Yossef
We build an explicit little endian value from the IDR register values. Use a proper le32 type to mark the var as such to satisfy Sparse. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reported-by: kbuild test robot <lkp@intel.com> Fixes: dcf6285d18ea1 ("crypto: ccree - add CID and PID support") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: ccree - remove set but not used variable 'du_size'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/crypto/ccree/cc_cipher.c: In function cc_setup_key_desc: drivers/crypto/ccree/cc_cipher.c:645:15: warning: variable du_size set but not used [-Wunused-but-set-variable] It is never used since introduction in commit dd8486c75085 ("crypto: ccree - move key load desc. before flow desc.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: ccree - Make cc_sec_disable staticYueHaibing
Fix sparse warning: drivers/crypto/ccree/cc_driver.c:37:6: warning: symbol 'cc_sec_disable' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: ccree - fix spelling mistake "protedcted" -> "protected"Colin Ian King
There is a spelling mistake in a dev_dbg message, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-By: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: caam/qi2 - generate hash keys in-placeHoria Geantă
Commit 307244452d3d ("crypto: caam - generate hash keys in-place") fixed ahash implementation in caam/jr driver such that user-provided key buffer is not DMA mapped, since it's not guaranteed to be DMAable. Apply a similar fix for caam/qi2 driver. Cc: <stable@vger.kernel.org> # v4.20+ Fixes: 3f16f6c9d632 ("crypto: caam/qi2 - add support for ahash algorithms") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: caam/qi2 - fix DMA mapping of stack memoryHoria Geantă
Commits c19650d6ea99 ("crypto: caam - fix DMA mapping of stack memory") and 65055e210884 ("crypto: caam - fix hash context DMA unmap size") fixed the ahash implementation in caam/jr driver such that req->result is not DMA-mapped (since it's not guaranteed to be DMA-able). Apply a similar fix for ahash implementation in caam/qi2 driver. Cc: <stable@vger.kernel.org> # v4.20+ Fixes: 3f16f6c9d632 ("crypto: caam/qi2 - add support for ahash algorithms") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: caam/qi2 - fix zero-length buffer DMA mappingHoria Geantă
Commit 04e6d25c5bb2 ("crypto: caam - fix zero-length buffer DMA mapping") fixed an issue in caam/jr driver where ahash implementation was DMA mapping a zero-length buffer. Current commit applies a similar fix for caam/qi2 driver. Cc: <stable@vger.kernel.org> # v4.20+ Fixes: 3f16f6c9d632 ("crypto: caam/qi2 - add support for ahash algorithms") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: stm32/cryp - update to return iv_outLionel Debieve
The kernel crypto API request output the next IV data to IV buffer for CBC implementation. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: stm32/cryp - remove request mutex protectionLionel Debieve
Mutex is badly used between threaded irq and driver. This mutex must be removed as the framework must ensure that requests must be serialized to avoid issue. Rework req to avoid crash during finalize by fixing the NULL pointer issue. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: stm32/cryp - add weak key check for DESLionel Debieve
Add weak key test for des functions calling the generic des_ekey. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: atmel - remove set but not used variable 'alg_name'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/crypto/atmel-tdes.c: In function 'atmel_tdes_setkey': drivers/crypto/atmel-tdes.c:803:14: warning: variable 'alg_name' set but not used [-Wunused-but-set-variable] It is not used any more since commit 52ea3cd2917b ("crypto: atmel - Forbid 2-key 3DES in FIPS mode") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: picoxcell - Use dev_get_drvdata()Kefeng Wang
Using dev_get_drvdata directly. Cc: Jamie Iles <jamie@jamieiles.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: crypto4xx - get rid of redundant using_sd variableChristian Lamparter
using_sd is used as a stand-in for sa_command_0.bf.scatter that we need to set anyway, so we might as well just prevent double-accounting. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: crypto4xx - use sync skcipher for fallbackChristian Lamparter
This replaces struct crypto_skcipher and the extra request size with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(), which uses a fixed stack size. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issuesChristian Lamparter
Currently, crypto4xx CFB and OFB AES ciphers are failing testmgr's test vectors. |cfb-aes-ppc4xx encryption overran dst buffer on test vector 3, cfg="in-place" |ofb-aes-ppc4xx encryption overran dst buffer on test vector 1, cfg="in-place" This is because of a very subtile "bug" in the hardware that gets indirectly mentioned in 18.1.3.5 Encryption/Decryption of the hardware spec: the OFB and CFB modes for AES are listed there as operation modes for >>> "Block ciphers" <<<. Which kind of makes sense, but we would like them to be considered as stream ciphers just like the CTR mode. To workaround this issue and stop the hardware from causing "overran dst buffer" on crypttexts that are not a multiple of 16 (AES_BLOCK_SIZE), we force the driver to use the scatter buffers as the go-between. As a bonus this patch also kills redundant pd_uinfo->num_gd and pd_uinfo->num_sd setters since the value has already been set before. Cc: stable@vger.kernel.org Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: crypto4xx - fix ctr-aes missing output IVChristian Lamparter
Commit 8efd972ef96a ("crypto: testmgr - support checking skcipher output IV") caused the crypto4xx driver to produce the following error: | ctr-aes-ppc4xx encryption test failed (wrong output IV) | on test vector 0, cfg="in-place" This patch fixes this by reworking the crypto4xx_setkey_aes() function to: - not save the iv for ECB (as per 18.2.38 CRYP0_SA_CMD_0: "This bit mut be cleared for DES ECB mode or AES ECB mode, when no IV is used.") - instruct the hardware to save the generated IV for all other modes of operations that have IV and then supply it back to the callee in pretty much the same way as we do it for cbc-aes already. - make it clear that the DIR_(IN|OUT)BOUND is the important bit that tells the hardware to encrypt or decrypt the data. (this is cosmetic - but it hopefully prevents me from getting confused again). - don't load any bogus hash when we don't use any hash operation to begin with. Cc: stable@vger.kernel.org Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03Merge tag 'perf-urgent-for-mingo-5.1-20190502' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: tools UAPI: Arnaldo Carvalho de Melo: - Sync x86's vmx.h with the kernel. - Copy missing unistd.h headers for arc, hexagon and riscv, fixing a reported build regression on the ARC 32-bit architecture. perf bench numa: Arnaldo Carvalho de Melo: - Add define for RUSAGE_THREAD if not present, fixing the build on the ARC architecture when only zlib and libnuma are present. perf BPF: Arnaldo Carvalho de Melo: - The disassembler-four-args feature test needs -ldl on distros such as Mageia 7. Bo YU: - Fix unlocking on success in perf_env__find_btf(), detected with the coverity tool. libtraceevent: Leo Yan: - Change misleading hard coded 'trace-cmd' string in error messages. ARM hardware tracing: Leo Yan: - Always allocate memory for cs_etm_queue::prev_packet, fixing a segfault when processing CoreSight perf data. perf annotate: Thadeu Lima de Souza Cascardo: - Fix build on 32 bit for BPF. perf report: Thomas Richter: - Report OOM in status line in the GTK UI. core libs: - Remove needless asm/unistd.h that, used with sys/syscall.h ended up redefining the syscalls defines in environments such as the ARC arch when using uClibc. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02swiotlb-xen: ensure we have a single callsite for xen_dma_map_pageChristoph Hellwig
Refactor the code a bit to make further changes easier. Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-05-02swiotlb-xen: simplify the DMA sync method implementationsChristoph Hellwig
Get rid of the grand multiplexer and implement the sync_single_for_cpu and sync_single_for_device methods directly, and then loop over them for the scatterlist based variants. Note that this also loses a few comments related to highlevel DMA API concepts, which have nothing to do with the swiotlb-xen implementation details. Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-05-02swiotlb-xen: use ->map_page to implement ->map_sgChristoph Hellwig
We can simply loop over the segments and map them, removing lots of duplicate code. Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-05-02swiotlb-xen: make instances match their method namesChristoph Hellwig
Just drop two pointless _attrs prefixes to make the code a little more grep-able. Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-05-03Merge tag 'drm-misc-fixes-2019-05-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - One revert for QXL for a DRI3 breakage Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190502122529.hguztj3kncaixe3d@flea
2019-05-02Merge branch 'nvme-5.2' of git://git.infradead.org/nvme into for-5.2/blockJens Axboe
Pull NVMe updates from Christoph. * 'nvme-5.2' of git://git.infradead.org/nvme: nvmet: protect discovery change log event list iteration nvme: mark nvme_core_init and nvme_core_exit static nvme: move command size checks to the core nvme-fabrics: check more command sizes nvme-pci: check more command sizes nvme-pci: remove an unneeded variable initialization nvme-pci: unquiesce admin queue on shutdown nvme-pci: shutdown on timeout during deletion nvme-pci: fix psdt field for single segment sgls nvme-multipath: don't print ANA group state by default nvme-multipath: split bios with the ns_head bio_set before submitting nvme-tcp: fix possible null deref on a timed out io queue connect
2019-05-02block: fix function name in commentRaul E Rangel
The comment was out of date. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-02of: unittest: Remove error printing on OOMGeert Uytterhoeven
There is no need to print a backtrace or other error message if kzalloc(), kmemdup(), or devm_kzalloc() fails, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-02of: irq: Remove WARN_ON() for kzalloc() failureGeert Uytterhoeven
There is no need to print a backtrace if kzalloc() fails, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-02leds: avoid races with workqueuePavel Machek
There are races between "main" thread and workqueue. They manifest themselves on Thinkpad X60: This should result in LED blinking, but it turns it off instead: root@amd:/data/pavel# cd /sys/class/leds/tpacpi\:\:power root@amd:/sys/class/leds/tpacpi::power# echo timer > trigger root@amd:/sys/class/leds/tpacpi::power# echo timer > trigger It should be possible to transition from blinking to solid on by echo 0 > brightness; echo 1 > brightness... but that does not work, either, if done too quickly. Synchronization of the workqueue fixes both. Fixes: 1afcadfcd184 ("leds: core: Use set_brightness_work for the blocking op") Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-05-02req->error only used for iopollStefan Bühler
No need to set it in io_poll_add; io_poll_complete doesn't use it to set the result in the CQE. Signed-off-by: Stefan Bühler <source@stbuehler.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-02io_uring: add support for eventfd notificationsJens Axboe
Allow registration of an eventfd, which will trigger an event every time a completion event happens for this io_uring instance. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-02io_uring: add support for IORING_OP_SYNC_FILE_RANGEJens Axboe
This behaves just like sync_file_range(2) does. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-02fs: add sync_file_range() helperJens Axboe
This just pulls out the ksys_sync_file_range() code to work on a struct file instead of an fd, so we can use it elsewhere. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-02io_uring: add support for marking commands as drainingJens Axboe
There are no ordering constraints between the submission and completion side of io_uring. But sometimes that would be useful to have. One common example is doing an fsync, for instance, and have it ordered with previous writes. Without support for that, the application must do this tracking itself. This adds a general SQE flag, IOSQE_IO_DRAIN. If a command is marked with this flag, then it will not be issued before previous commands have completed, and subsequent commands submitted after the drain will not be issued before the drain is started.. If there are no pending commands, setting this flag will not change the behavior of the issue of the command. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-02perf tools: Remove needless asm/unistd.h include fixing build in some placesArnaldo Carvalho de Melo
We were including sys/syscall.h and asm/unistd.h, since sys/syscall.h includes asm/unistd.h, sometimes this leads to the redefinition of defines, breaking the build. Noticed on ARC with uCLibc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: https://lkml.kernel.org/n/tip-xjpf80o64i2ko74aj2jih0qg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscvArnaldo Carvalho de Melo
Since those were introduced in: c8ce48f06503 ("asm-generic: Make time32 syscall numbers optional") But when the asm-generic/unistd.h was sync'ed with tools/ in: 1a787fc5ba18 ("tools headers uapi: Sync copy of asm-generic/unistd.h with the kernel sources") I forgot to copy the files for the architectures that define __ARCH_WANT_TIME32_SYSCALLS, so the perf build was breaking there, as reported by Vineet Gupta for the ARC architecture. After updating my ARC container to use the glibc based toolchain + cross building libnuma, zlib and elfutils, I finally managed to reproduce the problem and verify that this now is fixed and will not regress as will be tested before each pull req sent upstream. Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> CC: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/20190426193531.GC28586@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02tools build: Add -ldl to the disassembler-four-args feature testArnaldo Carvalho de Melo
Thomas Backlund reported that the perf build was failing on the Mageia 7 distro, that is because it uses: cat /tmp/build/perf/feature/test-disassembler-four-args.make.output /usr/bin/ld: /usr/lib64/libbfd.a(plugin.o): in function `try_load_plugin': /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:243: undefined reference to `dlopen' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:271: undefined reference to `dlsym' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:256: undefined reference to `dlclose' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:246: undefined reference to `dlerror' as we allow dynamic linking and loading Mageia 7 uses these linker flags: $ rpm --eval %ldflags  -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags So add -ldl to this feature LDFLAGS. Reported-by: Thomas Backlund <tmb@mageia.org> Tested-by: Thomas Backlund <tmb@mageia.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lkml.kernel.org/r/20190501173158.GC21436@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf cs-etm: Always allocate memory for cs_etm_queue::prev_packetLeo Yan
Robert Walker reported a segmentation fault is observed when process CoreSight trace data; this issue can be easily reproduced by the command 'perf report --itrace=i1000i' for decoding tracing data. If neither the 'b' flag (synthesize branches events) nor 'l' flag (synthesize last branch entries) are specified to option '--itrace', cs_etm_queue::prev_packet will not been initialised. After merging the code to support exception packets and sample flags, there introduced a number of uses of cs_etm_queue::prev_packet without checking whether it is valid, for these cases any accessing to uninitialised prev_packet will cause crash. As cs_etm_queue::prev_packet is used more widely now and it's already hard to follow which functions have been called in a context where the validity of cs_etm_queue::prev_packet has been checked, this patch always allocates memory for cs_etm_queue::prev_packet. Reported-by: Robert Walker <robert.walker@arm.com> Suggested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki K Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Fixes: 7100b12cf474 ("perf cs-etm: Generate branch sample for exception packet") Fixes: 24fff5eb2b93 ("perf cs-etm: Avoid stale branch samples when flush packet") Link: http://lkml.kernel.org/r/20190428083228.20246-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf cs-etm: Don't check cs_etm_queue::prev_packet validityLeo Yan
Since cs_etm_queue::prev_packet is allocated for all cases, it will never be NULL pointer; now validity checking prev_packet is pointless, remove all of them. Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki K Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20190428083228.20246-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf report: Report OOM in status line in the GTK UIThomas Richter
An -ENOMEM error is not reported in the GTK GUI. Instead this error message pops up on the screen: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 Processing events... [974K/3M] Error:failed to process sample 0xf4198 [0x8]: failed to process type: 68 However when I use the same perf.data file with --stdio it works: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 --stdio \ | head -12 # Total Lost Samples: 0 # # Samples: 76K of event 'cycles' # Event count (approx.): 99056160000 # # Overhead Command Shared Object Symbol # ........ ............... ................. ......... # 8.81% find [kernel.kallsyms] [k] ftrace_likely_update 8.74% swapper [kernel.kallsyms] [k] ftrace_likely_update 8.34% sshd [kernel.kallsyms] [k] ftrace_likely_update 2.19% kworker/u512:1- [kernel.kallsyms] [k] ftrace_likely_update The sample precentage is a bit low..... The GUI always fails in the FINISHED_ROUND event (68) and does not indicate the reason why. When happened is the following. Perf report calls a lot of functions and down deep when a FINISHED_ROUND event is processed, these functions are called: perf_session__process_event() + perf_session__process_user_event() + process_finished_round() + ordered_events__flush() + __ordered_events__flush() + do_flush() + ordered_events__deliver_event() + perf_session__deliver_event() + machine__deliver_event() + perf_evlist__deliver_event() + process_sample_event() + hist_entry_iter_add() --> only called in GUI case!!! + hist_iter__report__callback() + symbol__inc_addr_sample() Now this functions runs out of memory and returns -ENOMEM. This is reported all the way up until function perf_session__process_event() returns to its caller, where -ENOMEM is changed to -EINVAL and processing stops: if ((skip = perf_session__process_event(session, event, head)) < 0) { pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", head, event->header.size, event->header.type); err = -EINVAL; goto out_err; } This occurred in the FINISHED_ROUND event when it has to process some 10000 entries and ran out of memory. This patch indicates the root cause and displays it in the status line of ther perf report GUI. Output before (on GUI status line): 0xf4198 [0x8]: failed to process type: 68 Output after: 0xf4198 [0x8]: failed to process type: 68 [not enough memory] Committer notes: the 'skip' variable needs to be initialized to -EINVAL, so that when the size is less than sizeof(struct perf_event_attr) we avoid this valid compiler warning: util/session.c: In function ‘perf_session__process_events’: util/session.c:1936:7: error: ‘skip’ may be used uninitialized in this function [-Werror=maybe-uninitialized] err = skip; ~~~~^~~~~~ util/session.c:1874:6: note: ‘skip’ was declared here s64 skip; ^~~~ cc1: all warnings being treated as errors Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20190423105303.61683-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf bench numa: Add define for RUSAGE_THREAD if not presentArnaldo Carvalho de Melo
While cross building perf to the ARC architecture on a fedora 30 host, we were failing with: CC /tmp/build/perf/bench/numa.o bench/numa.c: In function ‘worker_thread’: bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’? getrusage(RUSAGE_THREAD, &rusage); ^~~~~~~~~~~~~ SIGEV_THREAD bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in [perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1 arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225 [perfbuilder@60d5802468f6 perf]$ Trying to reproduce a report by Vineet, I noticed that, with just cross-built zlib and numactl libraries, I ended up with the above failure. So, since RUSAGE_THREAD is available as a define, check for that and numactl libraries, I ended up with the above failure. So, since RUSAGE_THREAD is available as a define in the system headers, check if it is defined in the 'perf bench numa' sources and define it if not. Now it builds and I have to figure out if the problem reported by Vineet only takes place if we have libelf or some other library available. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02tools lib traceevent: Change tag string for errorLeo Yan
The traceevent lib is used by the perf tool, and when executing perf test -v 6 it outputs error log on the ARM64 platform: running test 33 '*:*'trace-cmd: No such file or directory [...] trace-cmd: Invalid argument The trace event parsing code originally came from trace-cmd so it keeps the tag string "trace-cmd" for errors, this easily introduces the impression that the perf tool launches trace-cmd command for trace event parsing, but in fact the related parsing is accomplished by the traceevent lib. This patch changes the tag string to "libtraceevent" so that we can avoid confusion and let users to more easily connect the error with traceevent lib. Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20190424013802.27569-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf annotate: Fix build on 32 bit for BPF annotationThadeu Lima de Souza Cascardo
Commit 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") adds support for BPF programs annotations but the new code does not build on 32-bit. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Song Liu <songliubraving@fb.com> Fixes: 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") Link: http://lkml.kernel.org/r/20190403194452.10845-1-cascardo@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02tools uapi x86: Sync vmx.h with the kernelArnaldo Carvalho de Melo
To pick up the changes from: 2b27924bb1d4 ("KVM: nVMX: always use early vmcs check when EPT is disabled") That causes this object in the tools/perf build process to be rebuilt: CC /tmp/build/perf/arch/x86/util/kvm-stat.o But it isn't using VMX_ABORT_ prefixed constants, so no change in behaviour. This silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/n/tip-bjbo3zc0r8i8oa0udpvftya6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf bpf: Return value with unlocking in perf_env__find_btf()Bo YU
In perf_env__find_btf(), we're returning without unlocking "env->bpf_progs.lock". There may be cause lockdep issue. Detected by CoversityScan, CID# 1444762:(program hangs(LOCK)) Signed-off-by: Bo YU <tsu.yubo@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Fixes: 2db7b1e0bd49d: (perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf()) Link: http://lkml.kernel.org/r/20190422080138.10088-1-tsu.yubo@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02dt-bindings: pinctrl: fix bias-pull,up typoChristian Lamparter
This patch fixes a shared typo in several qcom pinctrl dt-bindings. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 14:52:44 +0000