| Age | Commit message (Collapse) | Author |
|---|
|
Add missing break statement in order to prevent the code from falling
through to case CHIP_NAVI10.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: 14328aa58ce5 ("drm/amdkfd: Add navi10 support to amdkfd. (v3)")
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/x86/events/intel/core.c: In function ‘intel_pmu_init’:
arch/x86/events/intel/core.c:4959:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
pmem = true;
~~~~~^~~~~~
arch/x86/events/intel/core.c:4960:2: note: here
case INTEL_FAM6_SKYLAKE_MOBILE:
^~~~
arch/x86/events/intel/core.c:5008:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
pmem = true;
~~~~~^~~~~~
arch/x86/events/intel/core.c:5009:2: note: here
case INTEL_FAM6_ICELAKE_MOBILE:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/mtd/nand/onenand/onenand_base.c: In function ‘onenand_check_features’:
drivers/mtd/nand/onenand/onenand_base.c:3264:17: warning: this statement may fall through [-Wimplicit-fallthrough=]
this->options |= ONENAND_HAS_NOP_1;
drivers/mtd/nand/onenand/onenand_base.c:3265:2: note: here
case ONENAND_DEVICE_DENSITY_4Gb:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Cc: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
Warning level 3 was used: -Wimplicit-fallthrough=3
fs/afs/fsclient.c: In function ‘afs_deliver_fs_fetch_acl’:
fs/afs/fsclient.c:2199:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/fsclient.c:2202:2: note: here
case 1:
^~~~
fs/afs/fsclient.c:2216:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/fsclient.c:2219:2: note: here
case 2:
^~~~
fs/afs/fsclient.c:2225:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/fsclient.c:2228:2: note: here
case 3:
^~~~
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
fs/afs/yfsclient.c: In function ‘yfs_deliver_fs_fetch_opaque_acl’:
fs/afs/yfsclient.c:1984:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/yfsclient.c:1987:2: note: here
case 1:
^~~~
fs/afs/yfsclient.c:2005:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/yfsclient.c:2008:2: note: here
case 2:
^~~~
fs/afs/yfsclient.c:2014:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/yfsclient.c:2017:2: note: here
case 3:
^~~~
fs/afs/yfsclient.c:2035:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/yfsclient.c:2038:2: note: here
case 4:
^~~~
fs/afs/yfsclient.c:2047:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
call->unmarshall++;
~~~~~~~~~~~~~~~~^~
fs/afs/yfsclient.c:2050:2: note: here
case 5:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Also, fix some commenting style issues.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
drivers/net/can/peak_canfd/peak_pciefd_main.c:668:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/spi/mcp251x.c:875:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/at91_can.c:895:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/at91_can.c:953:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/usb/peak_usb/pcan_usb.c: In function ‘pcan_usb_decode_error’:
drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (n & PCAN_USB_ERROR_BUS_LIGHT) {
^
drivers/net/can/usb/peak_usb/pcan_usb.c:428:2: note: here
case CAN_STATE_ERROR_WARNING:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Notice that in some cases spelling mistakes were fixed.
In other cases, the /* fall through */ comment is placed
at the bottom of the case statement, which is what GCC
is expecting to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/firewire/core-device.c: In function ‘set_broadcast_channel’:
drivers/firewire/core-device.c:969:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (data & cpu_to_be32(1 << 31)) {
^
drivers/firewire/core-device.c:974:3: note: here
case RCODE_ADDRESS_ERROR:
^~~~
drivers/firewire/core-iso.c: In function ‘manage_channel’:
drivers/firewire/core-iso.c:308:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((data[0] & bit) == (data[1] & bit))
^
drivers/firewire/core-iso.c:312:3: note: here
default:
^~~~~~~
drivers/firewire/core-topology.c: In function ‘count_ports’:
drivers/firewire/core-topology.c:69:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
(*child_port_count)++;
~~~~~~~~~~~~~~~~~~~^~
drivers/firewire/core-topology.c:70:3: note: here
case SELFID_PORT_PARENT:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that in some cases, the code comment is modified in
accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (reworded a comment)
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
All intel_uc_fw_* functions are taking uc_fw as first param
except intel_uc_fw_fetch() which is taking i915. Fix that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725210314.21188-1-michal.wajdeczko@intel.com
|
|
Currently we use the engine->active.lock to ensure that the request is
not retired as we capture the data. However, we only need to ensure that
the vma are not removed prior to use acquiring their contents, and
since we have already relinquished our stop-machine protection, we
assume that the user will not be overwriting the contents before we are
able to record them.
In order to capture the vma outside of the spinlock, we acquire a
reference and mark the vma as active to prevent it from being unbound.
However, since it is tricky allocate an entry in the fence tree (doing
so would require taking a mutex) while inside the engine spinlock, we
use an atomic bit and special case the handling for i915_active_wait.
The core benefit is that we can use some non-atomic methods for mapping
the device pages, we can remove the slow compression phase out of atomic
context (i.e. stop antagonising the nmi-watchdog), and no we longer need
large reserves of atomic pages.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111215
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725223843.8971-1-chris@chris-wilson.co.uk
|
|
The combination of KASAN_STACK and GCC_PLUGIN_STRUCTLEAK_BYREF
leads to much larger kernel stack usage, as seen from the warnings
about functions that now exceed the 2048 byte limit:
drivers/media/i2c/tvp5150.c:253:1: error: the frame size of 3936 bytes is larger than 2048 bytes
drivers/media/tuners/r820t.c:1327:1: error: the frame size of 2816 bytes is larger than 2048 bytes
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:16552:1: error: the frame size of 3144 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
fs/ocfs2/aops.c:1892:1: error: the frame size of 2088 bytes is larger than 2048 bytes
fs/ocfs2/dlm/dlmrecovery.c:737:1: error: the frame size of 2088 bytes is larger than 2048 bytes
fs/ocfs2/namei.c:1677:1: error: the frame size of 2584 bytes is larger than 2048 bytes
fs/ocfs2/super.c:1186:1: error: the frame size of 2640 bytes is larger than 2048 bytes
fs/ocfs2/xattr.c:3678:1: error: the frame size of 2176 bytes is larger than 2048 bytes
net/bluetooth/l2cap_core.c:7056:1: error: the frame size of 2144 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
net/bluetooth/l2cap_core.c: In function 'l2cap_recv_frame':
net/bridge/br_netlink.c:1505:1: error: the frame size of 2448 bytes is larger than 2048 bytes
net/ieee802154/nl802154.c:548:1: error: the frame size of 2232 bytes is larger than 2048 bytes
net/wireless/nl80211.c:1726:1: error: the frame size of 2224 bytes is larger than 2048 bytes
net/wireless/nl80211.c:2357:1: error: the frame size of 4584 bytes is larger than 2048 bytes
net/wireless/nl80211.c:5108:1: error: the frame size of 2760 bytes is larger than 2048 bytes
net/wireless/nl80211.c:6472:1: error: the frame size of 2112 bytes is larger than 2048 bytes
The structleak plugin was previously disabled for CONFIG_COMPILE_TEST,
but meant we missed some bugs, so this time we should address them.
The frame size warnings are distracting, and risking a kernel stack
overflow is generally not beneficial to performance, so it may be best
to disallow that particular combination. This can be done by turning
off either one. I picked the dependency in GCC_PLUGIN_STRUCTLEAK_BYREF
and GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, as this option is designed to
make uninitialized stack usage less harmful when enabled on its own,
but it also prevents KASAN from detecting those cases in which it was
in fact needed.
KASAN_STACK is currently implied by KASAN on gcc, but could be made a
user selectable option if we want to allow combining (non-stack) KASAN
with GCC_PLUGIN_STRUCTLEAK_BYREF.
Note that it would be possible to specifically address the files that
print the warning, but presumably the overall stack usage is still
significantly higher than in other configurations, so this would not
address the full problem.
I could not test this with CONFIG_INIT_STACK_ALL, which may or may not
suffer from a similar problem.
Fixes: 81a56f6dcd20 ("gcc-plugins: structleak: Generalize to all variable types")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190722114134.3123901-1-arnd@arndb.de
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Since governor name is defined by DEVFREQ framework internally, use the
macro definition instead of using the name directly.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Jordan Crouse <jcrouse@codeaurora.org> for the msm part.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725035239.1192-1-zbestahu@gmail.com
|
|
Midgard/Bifrost GPUs have a bunch of feature registers providing details
of what the hardware supports. Panfrost already reads these, this patch
exports them all to user space so that the jobs created by the user space
driver can be tuned for the particular hardware implementation.
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724105626.53552-1-steven.price@arm.com
|
|
Implement late_register and early_unregister hooks for MST connectors.
Call drm helpers for MST connector registration, which registers the
AUX devices.
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-10-sunpeng.li@amd.com
|
|
Set the connector's kernel device as the parent for the aux kernel
device. This allows udev rules to access connector attributes when
creating symlinks to aux devices.
For example, the following udev rule:
SUBSYSTEM=="drm_dp_aux_dev", SUBSYSTEMS=="drm", ATTRS{edid}=="*",
SYMLINK+="drm_dp_aux/by-name/$id"
Will create the following symlinks using the connector's name:
$ ls /dev/drm_dp_aux/by-name/
card0-DP-1 card0-DP-2 card0-DP-3
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-6-sunpeng.li@amd.com
|
|
Set the connector's kernel device as the parent for the aux kernel
device. This allows udev rules to access connector attributes when
creating symlinks to aux devices.
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-4-sunpeng.li@amd.com
|
|
All available downstream ports - physical and logical - are exposed for
each MST device. They are listed in /dev/, following the same naming
scheme as SST devices by appending an incremental ID.
Although all downstream ports are exposed, only some will work as
expected. Consider the following topology:
+---------+
| ASIC |
+---------+
Conn-0|
|
+----v----+
+----| MST HUB |----+
| +---------+ |
| |
|Port-1 Port-2|
+-----v-----+ +-----v-----+
| MST | | SST |
| Display | | Display |
+-----------+ +-----------+
|Port-1
x
MST Path | MST Device
----------+----------------------------------
sst:0 | MST Hub
mst:0-1 | MST Display
mst:0-1-1 | MST Display's disconnected DP out
mst:0-1-8 | MST Display's internal sink
mst:0-2 | SST Display
On certain MST displays, the upstream physical port will ACK DPCD reads.
However, reads on the local logical port to the internal sink will
*NAK*. i.e. reading mst:0-1 ACKs, but mst:0-1-8 NAKs.
There may also be duplicates. Some displays will return the same GUID
when reading DPCD from both mst:0-1 and mst:0-1-8.
There are some device-dependent behavior as well. The MST hub used
during testing will actually *ACK* read requests on a disconnected
physical port, whereas the MST displays will NAK.
In light of these discrepancies, it's simpler to expose all downstream
ports - both physical and logical - and let the user decide what to use.
v3 changes:
* Change WARN_ON_ONCE -> DRM_ERROR on dpcd read errors
* Docstring and cosmetic fixes
v2 changes:
Moved remote aux device (un)registration to new mst connector late
register and early unregister helpers. Drivers should call these from
their own mst connector function hooks.
This is to solve an issue during driver unload, where mst connector
devices are unregistered before the remote aux devices are. In a setup
where aux devices are created as children of connector devices, the aux
device would be removed too early, and uncleanly. Doing so in
early_unregister solves this issue, as that is called before connector
unregistration.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-3-sunpeng.li@amd.com
|
|
Generic uc firmware layout definitions are unlikely to change and
are separate to other GuC specific definitions.
v2: reordered
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725141308.24660-3-michal.wajdeczko@intel.com
|
|
Sphinx was rendering firmware layout as html table, but since
we want to add sizes relations switch to plain text graphics.
v2: also update text and do it before move (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725141308.24660-2-michal.wajdeczko@intel.com
|
|
We moved GuC related files to new location but we missed to update
.rst file with links.
References: commit 0f261b241d9c ("drm/i915/uc: move GuC and HuC files under gt/uc/")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725141308.24660-1-michal.wajdeczko@intel.com
|
|
In preparation for adding aux devices for DP MST, make the IDR
non-cyclic. That way, hotplug cycling MST devices won't needlessly
increment the minor version index.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-2-sunpeng.li@amd.com
|
|
Currently nouveau_svm_fault expects nouveau_range_fault to never unlock
mmap_sem, but the latter unlocks it for a random selection of error
codes. Fix this up by always unlocking mmap_sem for non-zero return values
in nouveau_range_fault, and only unlocking it in the caller for successful
returns.
Link: https://lore.kernel.org/r/20190724065258.16603-5-hch@lst.de
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The parameter is always false, so remove it as well as the -EAGAIN
handling that can only happen for the non-blocking case.
Link: https://lore.kernel.org/r/20190724065258.16603-4-hch@lst.de
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
These two functions are marked as a legacy APIs to get rid of, but seem to
suit the current nouveau flow. Move it to the only user in preparation
for fixing a locking bug involving caller and callee. All comments
referring to the old API have been removed as this now is a driver private
helper.
Link: https://lore.kernel.org/r/20190724065258.16603-3-hch@lst.de
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
We should not have two different error codes for the same
condition. EAGAIN must be reserved for the FAULT_FLAG_ALLOW_RETRY retry
case and signals to the caller that the mmap_sem has been unlocked.
Use EBUSY for the !valid case so that callers can get the locking right.
Link: https://lore.kernel.org/r/20190724065258.16603-2-hch@lst.de
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
[jgg: elaborated commit message]
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Ice Lake Neural Network Processor for deep learning inference a.k.a.
ICL-NNPI can re-use Ice Lake Mobile regmap to enable Intel PMC Core
driver on it.
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lkml.org/lkml/2019/6/5/1034
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The SPI bus creates a device with the modalias of "xo1.75-ec". This
fixes XO-1.75 EC driver autoloading
Fixes: 0c3d931b3ab9 ("Platform: OLPC: Add XO-1.75 EC driver")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add a description for the context parameter in the struct wmi_device_id.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: a48e23385fcf ("platform/x86: wmi: add context pointer field to struct wmi_device_id")
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Only first MODULE_SOFTDEP statement is handled per module.
Multiple dependencies must be expressed in a single statement.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: "Enrico Weigelt, metux IT consult" <info@metux.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
[andy: massaged commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Pull NVMe fixes from Christoph.
* 'nvme-5.3' of git://git.infradead.org/nvme:
Revert "nvme-pci: don't create a read hctx mapping without read queues"
nvme: fix multipath crash when ANA is deactivated
nvme: fix memory leak caused by incorrect subsystem free
nvme: ignore subnqn for ADATA SX6000LNP
|
|
Daniel reports that when testing an http server that uses io_uring
to poll for incoming connections, sometimes it hard crashes. This is
due to an uninitialized list member for the io_uring request. Normally
this doesn't trigger and none of the test cases caught it.
Reported-by: Daniel Kozak <kozzi11@gmail.com>
Tested-by: Daniel Kozak <kozzi11@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki
"These fix two issues related to the RAPL MMIO interface support added
recently and one cpufreq driver issue.
Specifics:
- Initialize the power capping subsystem and the RAPL driver earlier
in case the int340X thermal driver is built-in and attempts to
register an MMIO interface for RAPL which must not happen before
the requisite infrastructure is ready (Zhang Rui)
- Fix the int340X thermal driver's RAPL MMIO interface registration
error path (Rafael Wysocki)
- Fix possible use-after-free in the pasemi cpufreq driver (Wen
Yang)"
* tag 'pm-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()
int340X/processor_thermal_device: Fix proc_thermal_rapl_remove()
powercap: Invoke powercap_init() and rapl_init() earlier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Four minor RISC-V-related changes:
- Add support for the new clone3 syscall for RV64, relying on the
generic support
- Add DT data for the gigabit Ethernet controller on the SiFive FU540
and the HiFive Unleashed board
- Update MAINTAINERS to add me to the arch/riscv maintainers' list
- Add support for PCIe message-signaled interrupts by reusing the
generic header file"
* tag 'riscv/for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: Add DT node for SiFive FU540 Ethernet controller driver
riscv: include generic support for MSI irqdomains
MAINTAINERS: Add Paul as a RISC-V maintainer
riscv: enable sys_clone3 syscall for rv64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest fixlets from Steven Rostedt:
"This contains only simple spelling fixes"
* tag 'ktest-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix some typos in config-bisect.pl
|
|
The access() (and faccessat()) credentials change can cause an
unnecessary load on the RCU machinery because every access() call ends
up freeing the temporary access credential using RCU.
This isn't really noticeable on small machines, but if you have hundreds
of cores you can cause huge slowdowns due to RCU storms.
It's easy to avoid: the temporary access crededntials aren't actually
normally accessed using RCU at all, so we can avoid the whole issue by
just marking them as such.
* access-creds:
access: avoid the RCU grace period for the temporary subjective credentials
|
|
Drop use of the deprecated drmP.h header.
While touching the files divide include files in blocks
and sort the files alphabetically.
v2:
- Replace all uses of DRM_WAIT_ON() with VIA_WAIT_ON()
and thus avoiding to pull in drm_os_linux.h
v3:
- DRM_WAIT_ON replacement moved to earlier patch (Emil)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Kevin Brace <kevinbrace@gmx.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723200944.17285-5-sam@ravnborg.org
|
|
Added include of header files to make via_drv.h self-contained.
v3:
- Reworded changelog a little - to reflect that more than one
header files are added
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Kevin Brace <kevinbrace@gmx.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723200944.17285-4-sam@ravnborg.org
|
|
VIA_WAIT_ON() is a direct copy of DRM_WAIT_ON() from
drm_os_linux.h.
The copy is made so we can avoid the dependency on the legacy header.
A more involved approach had been to introduce wait_event_* but for this
legacy driver the simpler and more safe approach with a copy of the
macro was selected.
Added the relevant header files for the functions used in VIA_WAIT_ON.
v3:
- Updated users of DRM_WAIT_ON => VIA_WAIT_ON (Emil)
- Updated $subject (Emil)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Kevin Brace <kevinbrace@gmx.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723200944.17285-3-sam@ravnborg.org
|
|
Commit 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from
atomic to int") changed the type of blocking_writers but forgot to
adjust relevant code in btrfs_tree_unlock by converting the
smp_mb__after_atomic to smp_mb. This opened up the possibility of a
deadlock due to re-ordering of setting blocking_writers and
checking/waking up the waiter. This particular lockup is explained in a
comment above waitqueue_active() function.
Fix it by converting the memory barrier to a full smp_mb, accounting
for the fact that blocking_writers is a simple integer.
Fixes: 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from atomic to int")
Tested-by: Johannes Thumshirn <jthumshirn@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The DRM_READ, DRM_WRITE macros comes from the deprecated drm_os_linux.h
header file. Remove their use to remove this dependency.
Replace the use of the macros with static inline variants.
v4:
- Use a more standard via_write8_mask() function (Emil)
v3:
- Use static inline functions, rather than macros (Emil)
- Use dedicated mask variants for byte access (Emil)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Kevin Brace <kevinbrace@gmx.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723200944.17285-2-sam@ravnborg.org
|
|
The specification for the Toeplitz function doesn't require to set the key
explicitly to be symmetric. In case a symmetric functionality is required
a symmetric key can be simply used.
Wrongly forcing the algorithm to symmetric causes the wrong packet
distribution and a performance degradation.
Link: https://lore.kernel.org/r/20190723065733.4899-7-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.7
Fixes: 28d6137008b2 ("IB/mlx5: Add RSS QP support")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Alex Vainman <alexv@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Port counter objects should be initialized even if alloc_stats is
unsupported, otherwise QP bind operations in user space can trigger a NULL
pointer deference if they try to bind QP on RDMA device which doesn't
support counters.
Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read")
Link: https://lore.kernel.org/r/20190723065733.4899-11-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
rdma_counter_init() may fail for a device. In such case while calculating
total sum, ignore NULL hstats.
This fixes below observed call trace.
BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 8000001009b30067 P4D 8000001009b30067 PUD 10549c9067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 55 PID: 20887 Comm: cat Kdump: loaded Not tainted 5.2.0-rc6-jdc+ #13
RIP: 0010:rdma_counter_get_hwstat_value+0xf2/0x150 [ib_core]
Call Trace:
show_hw_stats+0x5e/0x130 [ib_core]
dev_attr_show+0x15/0x50
sysfs_kf_seq_show+0xc6/0x1a0
seq_read+0x132/0x370
vfs_read+0x89/0x140
ksys_read+0x5c/0xd0
do_syscall_64+0x5a/0x240
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read")
Link: https://lore.kernel.org/r/20190723065733.4899-10-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The device requires that memory registration work requests that update the
address translation table of a MR will be fenced if posted together. This
scenario can happen when address ranges are invalidated by the mmu in
separate concurrent calls to the invalidation callback.
We prefer to block concurrent address updates for a single MR over fencing
since making the decision if a WQE needs fencing will be more expensive
and fencing all WQEs is a too radical choice.
Further, it isn't clear that this code can even run safely concurrently,
so a lock is a safer choice.
Fixes: b4cfe447d47b ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers")
Link: https://lore.kernel.org/r/20190723065733.4899-8-leon@kernel.org
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/x86/events/intel/core.c: In function ‘intel_pmu_init’:
arch/x86/events/intel/core.c:4959:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/events/intel/core.c:5008:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190624161913.GA32270@embeddedor
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Some hardware PMU drivers will override perf_event.cpu inside their
event_init callback. This causes a lockdep splat when initialized through
the kernel API:
WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208
pc : ctx_sched_out+0x78/0x208
Call trace:
ctx_sched_out+0x78/0x208
__perf_install_in_context+0x160/0x248
remote_function+0x58/0x68
generic_exec_single+0x100/0x180
smp_call_function_single+0x174/0x1b8
perf_install_in_context+0x178/0x188
perf_event_create_kernel_counter+0x118/0x160
Fix this by calling perf_install_in_context with event->cpu, just like
perf_event_open
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
check_msr is used to fix a bug report in guest where KVM doesn't support
LBR MSR and cause #GP.
The msr check is bypassed on real HW to workaround a false failure,
see commit d0e1a507bdc7 ("perf/x86/intel: Disable check_msr for real HW")
When running a guest with CONFIG_HYPERVISOR_GUEST not set or "nopv"
enabled, current check isn't enough and #GP could trigger.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1564022366-18293-1-git-send-email-zhenzhong.duan@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The Intel SDM states that bit 13 of Icelake's MSR_OFFCORE_RSP_x
register is valid, and used for counting hardware generated prefetches
of L3 cache. Update the bitmask to allow bit 13.
Before:
$ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3
Performance counter stats for 'sleep 3':
<not supported> cpu/event=0xb7,umask=0x1,config1=0x1bfff/u
After:
$ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3
Performance counter stats for 'sleep 3':
9,293 cpu/event=0xb7,umask=0x1,config1=0x1bfff/u
Signed-off-by: Yunying Sun <yunying.sun@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: https://lkml.kernel.org/r/20190724082932.12833-1-yunying.sun@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Sampling SLOTS event and ref-cycles event in a group on Icelake gives
EINVAL.
SLOTS event is the event stands for the fixed counter 3, not fixed
counter 2. Wrong mask was set to SLOTS event in
intel_icl_pebs_event_constraints[].
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support")
Link: https://lkml.kernel.org/r/20190723200429.8180-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
An uninitialized/ zeroed mutex will go unnoticed because there is no
check for it. There is a magic check in the unlock's slowpath path which
might go unnoticed if the unlock happens in the fastpath.
Add a ->magic check early in the mutex_lock() and mutex_trylock() path.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190703092125.lsdf4gpsh2plhavb@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
As Will Deacon points out, CONFIG_PROVE_LOCKING implies TRACE_IRQFLAGS,
so the conditions I added in the previous patch, and some others in the
same file can be simplified by only checking for the former.
No functional change.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Yuyang Du <duyuyang@gmail.com>
Fixes: 886532aee3cd ("locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING")
Link: https://lkml.kernel.org/r/20190628102919.2345242-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
