summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-12media: dt-bindings: hynix,hi846: Add video-interface-devices propertiesJacopo Mondi
Allow properties from video-interface-devices.yaml for the SK Hynix Hi-846 sensor. All properties specified in video-interface-devices.yaml schema are valid, so make them accepted by changing "additionalProperties: false" to "unevaluatedProperties: false" at the schema top-level. Add two properties from video-interface-devices.yaml to the example to validate the new schema. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: ti: Add CSI2RX support for J721EJai Luthra
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate capture over a CSI-2 bus. The Cadence CSI2RX IP acts as a bridge between the TI specific parts and the CSI-2 protocol parts. TI then has a wrapper on top of this bridge called the SHIM layer. It takes in data from stream 0, repacks it, and sends it to memory over PSI-L DMA. This driver acts as the "front end" to V4L2 client applications. It implements the required ioctls and buffer operations, passes the necessary calls on to the bridge, programs the SHIM layer, and performs DMA via the dmaengine API to finally return the data to a buffer supplied by the application. Co-developed-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Tested-by: Vaishnav Achath <vaishnav.a@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: dt-bindings: Add TI J721E CSI2RXPratyush Yadav
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the parts together. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: cadence: csi2rx: Add link validationPratyush Yadav
Add media link validation to make sure incorrectly configured pipelines are caught. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: cadence: csi2rx: Populate subdev devnodePratyush Yadav
The devnode can be used by media-ctl and other userspace tools to perform configurations on the subdev. Without it, media-ctl returns ENOENT when setting format on the sensor subdev. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: cadence: csi2rx: Fix stream data configurationPratyush Yadav
Firstly, there is no VC_EN bit present in the STREAM_DATA_CFG register. Bit 31 is part of the VL_SELECT field. Remove it completely. Secondly, it makes little sense to enable ith virtual channel for ith stream. Sure, there might be a use-case that demands it. But there might also be a use case that demands all streams to use the 0th virtual channel. Prefer this case over the former because it is less arbitrary and also makes it very clear what the limitations of the current driver is instead of giving a false impression that multiple virtual channels are supported. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: cadence: csi2rx: Set the STOP bit when stopping a streamPratyush Yadav
The stream stop procedure says that the STOP bit should be set when the stream is to be stopped, and then the ready bit in stream status register polled to make sure the STOP operation is finished. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: cadence: csi2rx: Soft reset the streams before starting capturePratyush Yadav
This resets the stream state machines and FIFOs, giving them a clean slate. On J721E if the streams are not reset before starting the capture, the captured frame gets wrapped around vertically on every run after the first. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: cadence: csi2rx: Configure DPHY using link freqPratyush Yadav
Some platforms like TI's J721E can have the CSI2RX paired with an external DPHY. Use the generic PHY framework to configure the DPHY with the correct link frequency. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Co-developed-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: cadence: csi2rx: Add get_fmt and set_fmt pad opsPratyush Yadav
The format is needed to calculate the link speed for the external DPHY configuration. It is not right to query the format from the source subdev. Add get_fmt and set_fmt pad operations so that the format can be configured and correct bpp be selected. Initialize and use the v4l2 subdev active state to keep track of the active formats. Also propagate the new format from the sink pad to all the source pads. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Co-developed-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: cadence: csi2rx: Cleanup media entity properlyPratyush Yadav
Call media_entity_cleanup() in probe error path and remove to make sure the media entity is cleaned up properly. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: cadence: csi2rx: Unregister v4l2 async notifierPratyush Yadav
The notifier is added to the global notifier list when registered. When the module is removed, the struct csi2rx_priv in which the notifier is embedded, is destroyed. As a result the notifier list has a reference to a notifier that no longer exists. This causes invalid memory accesses when the list is iterated over. Similar for when the probe fails. Unregister and clean up the notifier to avoid this. Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver") Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: dt-bindings: cadence-csi2rx: Add TI compatible stringJai Luthra
Add a SoC-specific compatible string for TI's integration of this IP in J7 and AM62 line of SoCs. Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: dt-bindings: Make sure items in data-lanes are uniquePratyush Yadav
The data-lanes property maps the logical lane numbers to the physical lane numbers. The position of an entry is the logical lane number and its value is the physical lane number. Since one physical lane can only map to one logical lane, no number in the list should repeat. Add the uniqueItems constraint on the property to enforce this. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: Documentation: ccs: Fix spelling mistakeUmang Jain
Correct the wrong spelling of 'exposes' in the binner section. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12staging: media: ipu3: remove ftrace-like loggingRicardo B. Marliere
This patch fixes the following checkpatch.pl warnings in ipu3.c: WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "enter %s\n", __func__); WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "leave %s\n", __func__); WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "enter %s\n", __func__); WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "leave %s\n", __func__); Fixes: 7fc7af649ca7 ("media: staging/intel-ipu3: Add imgu top level pci device driver") Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-11media: lirc: drop trailing space from scancode transmitSean Young
When transmitting, infrared drivers expect an odd number of samples; iow without a trailing space. No problems have been observed so far, so this is just belt and braces. Fixes: 9b6192589be7 ("media: lirc: implement scancode sending") Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-11media: sharp: fix sharp encodingSean Young
The Sharp protocol[1] encoding has incorrect timings for bit space. [1] https://www.sbprojects.net/knowledge/ir/sharp.php Fixes: d35afc5fe097 ("[media] rc: ir-sharp-decoder: Add encode capability") Cc: stable@vger.kernel.org Reported-by: Joe Ferner <joe.m.ferner@gmail.com> Closes: https://sourceforge.net/p/lirc/mailman/message/38604507/ Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-11staging: media: atomisp: improve unwindingHans Verkuil
This fixes two smatch warnings: drivers/staging/media/atomisp/pci/atomisp_cmd.c:2779 atomisp_cp_dvs_6axis_config() warn: missing unwind goto? drivers/staging/media/atomisp/pci/atomisp_cmd.c:2878 atomisp_cp_morph_table() warn: missing unwind goto? Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> CC: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-10-11media: i2c: tc358746: check fmt validityHans Verkuil
Check if the format was really found. Fixes smatch warning: drivers/media/i2c/tc358746.c:790 tc358746_set_fmt() error: 'fmt' dereferencing possible ERR_PTR() Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> CC: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2023-10-11staging: media: atomisp: drop check for reentrant .s_stream()Hans Verkuil
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Also fixes a smatch warning: drivers/staging/media/atomisp/i2c/atomisp-gc0310.c:446 gc0310_s_stream() warn: missing error code 'ret' Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> CC: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-10-07media: imon: fix access to invalid resource for the second interfaceTakashi Iwai
imon driver probes two USB interfaces, and at the probe of the second interface, the driver assumes blindly that the first interface got bound with the same imon driver. It's usually true, but it's still possible that the first interface is bound with another driver via a malformed descriptor. Then it may lead to a memory corruption, as spotted by syzkaller; imon driver accesses the data from drvdata as struct imon_context object although it's a completely different one that was assigned by another driver. This patch adds a sanity check -- whether the first interface is really bound with the imon driver or not -- for avoiding the problem above at the probe time. Reported-by: syzbot+59875ffef5cb9c9b29e9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000a838aa0603cc74d6@google.com/ Tested-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20230922005152.163640-1-ricardo@marliere.net Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: rc: keymaps: add missing MODULE_DESCRIPTION to keymapsHans Verkuil
When building the modules 'modpost' warns about missing MODULE_DESCRIPTION. Since almost none of the rc keymap modules have this, it produces a lot of warnings. As a first step to fixing all media modules, add this line to all keymaps. The description should be a human-readable string describing the remote or the remote controller that the keymap can be used with. Note that keymaps/rc-cec.c is actually compiled into the rc-core, so that is the sole keymap source that didn't need this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sean Young <sean@mess.org>
2023-10-07media: Documentation: Split camera sensor documentationSakari Ailus
Split camera sensor documentation into user and kernel portions. This should make it easier for the user space developers to find the relevant documentation. Also add a list of exemplary drivers and add imx219 driver to it, besides those that were already mentioned. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: Add MIPI CSI-2 generic long packet type definitionSakari Ailus
Add a definition for MIPI CSI-2 generic long packet types. The generic long packet types are numbered from 1 to 4. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: mc: Check pad flag validitySakari Ailus
Check the validity of pad flags on entity init. Exactly one of the flags must be set. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: v4l: subdev: Print debug information on frame descriptorSakari Ailus
Print debug level information on returned frame descriptors. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: v4l: subdev: Clear frame descriptor before get_frame_descSakari Ailus
Clear frame descriptor before calling transmitter's get_frame_desc() op. Also remove the corresponding memset() calls from drivers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ov2740: Return -EPROBE_DEFER if no endpoint is foundSakari Ailus
With ipu bridge, endpoints may only be created when ipu bridge has initialised. This may happen after the sensor driver has first probed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ov2740: Use sub-device active stateSakari Ailus
Use sub-device active state. Rely on control handler lock to serialise access to the active state. Also clean up locking on s_stream handler. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ov2740: Enable runtime PM before registering the async subdevSakari Ailus
Enable runtime PM before registering the async subdev as the driver UAPI may become accessible immediately after the registration. Runtime PM needs to be enabled by that time. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Drop re-entrant s_stream supportSakari Ailus
The s_stream is called to enable and to disable streaming on a sub-device. The caller may only call it to change the state, enabling streaming is not allowed when it is already disabled, and similarly for disabling streaming. Remove the check from the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Partially revert "media: i2c: Use pm_runtime_resume_and_get()"Sakari Ailus
ccs_pm_get_init() depends on the return values > 0 of pm_runtime_get_sync(), thus it can't use pm_runtime_resume_and_get(). There's even a comment in the driver on this, a few lines above the code. Fixes: aa0adb399d09 ("media: i2c: Use pm_runtime_resume_and_get()") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Use sub-device active stateSakari Ailus
Make use of sub-device active state. In most cases the effect on need for acquiring the mutex is non-existent as access to the driver's core data structure still needs to be serialised. This still removes a lot of code as the code paths for active and try state are the same in many cases. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Obtain media bus formats before initialising up sub-devicesSakari Ailus
The available mbus codes will soon be needed earlier, at the time sub-devices are initialisaed. This is due to calling init_cfg() op via the v4l2_subdev_init_finalize(). Move ccs_get_mbus_formats() before ccs_init_subdev() calls. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Move media_entity_pads_init to init from registerSakari Ailus
The media entity will soon need to be initialised before the sub-device init finalisation that allocates memory for sub-device state. Do that now. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Rename ccs_create_subdev as ccs_init_subdevSakari Ailus
The ccs_create_subdev() function initialises a sub-device in the CCS driver, including CCS specific needs. Rename it as ccs_init_subdev() as it better reflects what the function does. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Switch to init_cfgSakari Ailus
Use init_cfg() instead of manually setting up defaults in file handle open. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Correct error handling in ccs_register_subdevSakari Ailus
ccs_register_subdev() did not clean up the media entity in error case, do that now. Also switch to goto based error handling. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Correctly initialise try compose rectangleSakari Ailus
Initialise the try sink compose rectangle size to the sink compose rectangle for binner and scaler sub-devices. This was missed due to the faulty condition that lead to the compose rectangles to be initialised for the pixel array sub-device where it is not relevant. Fixes: ccfc97bdb5ae ("[media] smiapp: Add driver") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Fix driver quirk struct documentationSakari Ailus
Fix documentation for struct ccs_quirk, a device specific struct for managing deviations from the standard. The flags field was drifted away from where it should have been. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: Documentation: Align numbered list, make it a proper ReSTSakari Ailus
Align lines for numbered list so that Sphinx produces an uniform output for all list entries. Also indent paragraphs of such list entries for consistency. Also use ReST numbered list syntax for the entries. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: i2c: imx219: Move variables to inner scopeLaurent Pinchart
The exposure_max, exposure_def and hblank variables are only used in an inner scope in the imx219_set_pad_format() function. Move them to that scope to keep them closer to their usage and improve readability. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: i2c: imx219: Name all subdev state variables 'state'Laurent Pinchart
Subdev state variables are named with a mix of 'state' and 'sd_state' through the driver. To improve consistency, name them all 'state'. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: i2c: imx219: Calculate crop rectangle dynamicallyLaurent Pinchart
Calculate the crop rectangle size and location dynamically when setting the format, instead of storing it in the imx219_mode structure. This removes duplicated information from the mode, to guarantee consistency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: i2c: imx219: Separate horizontal and vertical binningLaurent Pinchart
The IMX219 has distinct binning registers for the horizontal and vertical directions. Calculate their value and write them separately. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: i2c: imx219: Implement .init_cfg() using .set_fmt()Laurent Pinchart
Instead of duplicating the logical implemented in the .set_fmt() operation in .init_cfg(), call .set_fmt() directly. This centralizes the format and crop rectangle calculations in a single place. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: i2c: imx219: Remove unneeded gotoLaurent Pinchart
Simplify the imx219_set_stream() by removing an unneeded goto statement, and its corresponding error label. The natural flow of the function is correct. While at it, drop a useless comment. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: i2c: imx219: Group functions by purposeLaurent Pinchart
Move functions around to group them by purpose, in order to improve readability. No functional change is intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: i2c: imx219: Drop IMX219_VTS_* macrosLaurent Pinchart
The IMX219_VTS_* macros define default VTS values for the modes supported by the driver. They are used in a single place, and hinder readability compared to using the value directly as a decimal number. Drop them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
generated by cgit (git 2.34.1) at 2025-09-07 20:24:16 +0000