summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-28x86/asm: Fix register orderPeter Zijlstra
Ensure the register order is correct; this allows for easy translation between register number and trampoline and vice-versa. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.978573921@infradead.org
2021-10-28x86/retpoline: Remove unused replacement symbolsPeter Zijlstra
Now that objtool no longer creates alternatives, these replacement symbols are no longer needed, remove them. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.915051744@infradead.org
2021-10-28objtool,x86: Replace alternatives with .retpoline_sitesPeter Zijlstra
Instead of writing complete alternatives, simply provide a list of all the retpoline thunk calls. Then the kernel is free to do with them as it pleases. Simpler code all-round. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.850007165@infradead.org
2021-10-28objtool: Shrink struct instructionPeter Zijlstra
Any one instruction can only ever call a single function, therefore insn->mcount_loc_node is superfluous and can use insn->call_node. This shrinks struct instruction, which is by far the most numerous structure objtool creates. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.785456706@infradead.org
2021-10-28objtool: Explicitly avoid self modifying code in .altinstr_replacementPeter Zijlstra
Assume ALTERNATIVE()s know what they're doing and do not change, or cause to change, instructions in .altinstr_replacement sections. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.722511775@infradead.org
2021-10-28objtool: Classify symbolsPeter Zijlstra
In order to avoid calling str*cmp() on symbol names, over and over, do them all once upfront and store the result. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.658539311@infradead.org
2021-10-28Merge branch 'fixes' into nextUlf Hansson
2021-10-28mmc: tmio: reenable card irqs after the reset callbackWolfram Sang
The reset callback may clear the internal card detect interrupts, so make sure to reenable them if needed. Fixes: b4d86f37eacb ("mmc: renesas_sdhi: do hard reset if possible") Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211028195149.8003-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-28bpf/benchs: Add benchmarks for comparing hashmap lookups w/ vs. w/out bloom ↵Joanne Koong
filter This patch adds benchmark tests for comparing the performance of hashmap lookups without the bloom filter vs. hashmap lookups with the bloom filter. Checking the bloom filter first for whether the element exists should overall enable a higher throughput for hashmap lookups, since if the element does not exist in the bloom filter, we can avoid a costly lookup in the hashmap. On average, using 5 hash functions in the bloom filter tended to perform the best across the widest range of different entry sizes. The benchmark results using 5 hash functions (running on 8 threads on a machine with one numa node, and taking the average of 3 runs) were roughly as follows: value_size = 4 bytes - 10k entries: 30% faster 50k entries: 40% faster 100k entries: 40% faster 500k entres: 70% faster 1 million entries: 90% faster 5 million entries: 140% faster value_size = 8 bytes - 10k entries: 30% faster 50k entries: 40% faster 100k entries: 50% faster 500k entres: 80% faster 1 million entries: 100% faster 5 million entries: 150% faster value_size = 16 bytes - 10k entries: 20% faster 50k entries: 30% faster 100k entries: 35% faster 500k entres: 65% faster 1 million entries: 85% faster 5 million entries: 110% faster value_size = 40 bytes - 10k entries: 5% faster 50k entries: 15% faster 100k entries: 20% faster 500k entres: 65% faster 1 million entries: 75% faster 5 million entries: 120% faster Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211027234504.30744-6-joannekoong@fb.com
2021-10-28bpf/benchs: Add benchmark tests for bloom filter throughput + false positiveJoanne Koong
This patch adds benchmark tests for the throughput (for lookups + updates) and the false positive rate of bloom filter lookups, as well as some minor refactoring of the bash script for running the benchmarks. These benchmarks show that as the number of hash functions increases, the throughput and the false positive rate of the bloom filter decreases. >From the benchmark data, the approximate average false-positive rates are roughly as follows: 1 hash function = ~30% 2 hash functions = ~15% 3 hash functions = ~5% 4 hash functions = ~2.5% 5 hash functions = ~1% 6 hash functions = ~0.5% 7 hash functions = ~0.35% 8 hash functions = ~0.15% 9 hash functions = ~0.1% 10 hash functions = ~0% For reference data, the benchmarks run on one thread on a machine with one numa node for 1 to 5 hash functions for 8-byte and 64-byte values are as follows: 1 hash function: 50k entries 8-byte value Lookups - 51.1 M/s operations Updates - 33.6 M/s operations False positive rate: 24.15% 64-byte value Lookups - 15.7 M/s operations Updates - 15.1 M/s operations False positive rate: 24.2% 100k entries 8-byte value Lookups - 51.0 M/s operations Updates - 33.4 M/s operations False positive rate: 24.04% 64-byte value Lookups - 15.6 M/s operations Updates - 14.6 M/s operations False positive rate: 24.06% 500k entries 8-byte value Lookups - 50.5 M/s operations Updates - 33.1 M/s operations False positive rate: 27.45% 64-byte value Lookups - 15.6 M/s operations Updates - 14.2 M/s operations False positive rate: 27.42% 1 mil entries 8-byte value Lookups - 49.7 M/s operations Updates - 32.9 M/s operations False positive rate: 27.45% 64-byte value Lookups - 15.4 M/s operations Updates - 13.7 M/s operations False positive rate: 27.58% 2.5 mil entries 8-byte value Lookups - 47.2 M/s operations Updates - 31.8 M/s operations False positive rate: 30.94% 64-byte value Lookups - 15.3 M/s operations Updates - 13.2 M/s operations False positive rate: 30.95% 5 mil entries 8-byte value Lookups - 41.1 M/s operations Updates - 28.1 M/s operations False positive rate: 31.01% 64-byte value Lookups - 13.3 M/s operations Updates - 11.4 M/s operations False positive rate: 30.98% 2 hash functions: 50k entries 8-byte value Lookups - 34.1 M/s operations Updates - 20.1 M/s operations False positive rate: 9.13% 64-byte value Lookups - 8.4 M/s operations Updates - 7.9 M/s operations False positive rate: 9.21% 100k entries 8-byte value Lookups - 33.7 M/s operations Updates - 18.9 M/s operations False positive rate: 9.13% 64-byte value Lookups - 8.4 M/s operations Updates - 7.7 M/s operations False positive rate: 9.19% 500k entries 8-byte value Lookups - 32.7 M/s operations Updates - 18.1 M/s operations False positive rate: 12.61% 64-byte value Lookups - 8.4 M/s operations Updates - 7.5 M/s operations False positive rate: 12.61% 1 mil entries 8-byte value Lookups - 30.6 M/s operations Updates - 18.9 M/s operations False positive rate: 12.54% 64-byte value Lookups - 8.0 M/s operations Updates - 7.0 M/s operations False positive rate: 12.52% 2.5 mil entries 8-byte value Lookups - 25.3 M/s operations Updates - 16.7 M/s operations False positive rate: 16.77% 64-byte value Lookups - 7.9 M/s operations Updates - 6.5 M/s operations False positive rate: 16.88% 5 mil entries 8-byte value Lookups - 20.8 M/s operations Updates - 14.7 M/s operations False positive rate: 16.78% 64-byte value Lookups - 7.0 M/s operations Updates - 6.0 M/s operations False positive rate: 16.78% 3 hash functions: 50k entries 8-byte value Lookups - 25.1 M/s operations Updates - 14.6 M/s operations False positive rate: 7.65% 64-byte value Lookups - 5.8 M/s operations Updates - 5.5 M/s operations False positive rate: 7.58% 100k entries 8-byte value Lookups - 24.7 M/s operations Updates - 14.1 M/s operations False positive rate: 7.71% 64-byte value Lookups - 5.8 M/s operations Updates - 5.3 M/s operations False positive rate: 7.62% 500k entries 8-byte value Lookups - 22.9 M/s operations Updates - 13.9 M/s operations False positive rate: 2.62% 64-byte value Lookups - 5.6 M/s operations Updates - 4.8 M/s operations False positive rate: 2.7% 1 mil entries 8-byte value Lookups - 19.8 M/s operations Updates - 12.6 M/s operations False positive rate: 2.60% 64-byte value Lookups - 5.3 M/s operations Updates - 4.4 M/s operations False positive rate: 2.69% 2.5 mil entries 8-byte value Lookups - 16.2 M/s operations Updates - 10.7 M/s operations False positive rate: 4.49% 64-byte value Lookups - 4.9 M/s operations Updates - 4.1 M/s operations False positive rate: 4.41% 5 mil entries 8-byte value Lookups - 18.8 M/s operations Updates - 9.2 M/s operations False positive rate: 4.45% 64-byte value Lookups - 5.2 M/s operations Updates - 3.9 M/s operations False positive rate: 4.54% 4 hash functions: 50k entries 8-byte value Lookups - 19.7 M/s operations Updates - 11.1 M/s operations False positive rate: 1.01% 64-byte value Lookups - 4.4 M/s operations Updates - 4.0 M/s operations False positive rate: 1.00% 100k entries 8-byte value Lookups - 19.5 M/s operations Updates - 10.9 M/s operations False positive rate: 1.00% 64-byte value Lookups - 4.3 M/s operations Updates - 3.9 M/s operations False positive rate: 0.97% 500k entries 8-byte value Lookups - 18.2 M/s operations Updates - 10.6 M/s operations False positive rate: 2.05% 64-byte value Lookups - 4.3 M/s operations Updates - 3.7 M/s operations False positive rate: 2.05% 1 mil entries 8-byte value Lookups - 15.5 M/s operations Updates - 9.6 M/s operations False positive rate: 1.99% 64-byte value Lookups - 4.0 M/s operations Updates - 3.4 M/s operations False positive rate: 1.99% 2.5 mil entries 8-byte value Lookups - 13.8 M/s operations Updates - 7.7 M/s operations False positive rate: 3.91% 64-byte value Lookups - 3.7 M/s operations Updates - 3.6 M/s operations False positive rate: 3.78% 5 mil entries 8-byte value Lookups - 13.0 M/s operations Updates - 6.9 M/s operations False positive rate: 3.93% 64-byte value Lookups - 3.5 M/s operations Updates - 3.7 M/s operations False positive rate: 3.39% 5 hash functions: 50k entries 8-byte value Lookups - 16.4 M/s operations Updates - 9.1 M/s operations False positive rate: 0.78% 64-byte value Lookups - 3.5 M/s operations Updates - 3.2 M/s operations False positive rate: 0.77% 100k entries 8-byte value Lookups - 16.3 M/s operations Updates - 9.0 M/s operations False positive rate: 0.79% 64-byte value Lookups - 3.5 M/s operations Updates - 3.2 M/s operations False positive rate: 0.78% 500k entries 8-byte value Lookups - 15.1 M/s operations Updates - 8.8 M/s operations False positive rate: 1.82% 64-byte value Lookups - 3.4 M/s operations Updates - 3.0 M/s operations False positive rate: 1.78% 1 mil entries 8-byte value Lookups - 13.2 M/s operations Updates - 7.8 M/s operations False positive rate: 1.81% 64-byte value Lookups - 3.2 M/s operations Updates - 2.8 M/s operations False positive rate: 1.80% 2.5 mil entries 8-byte value Lookups - 10.5 M/s operations Updates - 5.9 M/s operations False positive rate: 0.29% 64-byte value Lookups - 3.2 M/s operations Updates - 2.4 M/s operations False positive rate: 0.28% 5 mil entries 8-byte value Lookups - 9.6 M/s operations Updates - 5.7 M/s operations False positive rate: 0.30% 64-byte value Lookups - 3.2 M/s operations Updates - 2.7 M/s operations False positive rate: 0.30% Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211027234504.30744-5-joannekoong@fb.com
2021-10-28selftests/bpf: Add bloom filter map test casesJoanne Koong
This patch adds test cases for bpf bloom filter maps. They include tests checking against invalid operations by userspace, tests for using the bloom filter map as an inner map, and a bpf program that queries the bloom filter map for values added by a userspace program. Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211027234504.30744-4-joannekoong@fb.com
2021-10-28libbpf: Add "map_extra" as a per-map-type extra flagJoanne Koong
This patch adds the libbpf infrastructure for supporting a per-map-type "map_extra" field, whose definition will be idiosyncratic depending on map type. For example, for the bloom filter map, the lower 4 bits of map_extra is used to denote the number of hash functions. Please note that until libbpf 1.0 is here, the "bpf_create_map_params" struct is used as a temporary means for propagating the map_extra field to the kernel. Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211027234504.30744-3-joannekoong@fb.com
2021-10-28bpf: Add bloom filter map implementationJoanne Koong
This patch adds the kernel-side changes for the implementation of a bpf bloom filter map. The bloom filter map supports peek (determining whether an element is present in the map) and push (adding an element to the map) operations.These operations are exposed to userspace applications through the already existing syscalls in the following way: BPF_MAP_LOOKUP_ELEM -> peek BPF_MAP_UPDATE_ELEM -> push The bloom filter map does not have keys, only values. In light of this, the bloom filter map's API matches that of queue stack maps: user applications use BPF_MAP_LOOKUP_ELEM/BPF_MAP_UPDATE_ELEM which correspond internally to bpf_map_peek_elem/bpf_map_push_elem, and bpf programs must use the bpf_map_peek_elem and bpf_map_push_elem APIs to query or add an element to the bloom filter map. When the bloom filter map is created, it must be created with a key_size of 0. For updates, the user will pass in the element to add to the map as the value, with a NULL key. For lookups, the user will pass in the element to query in the map as the value, with a NULL key. In the verifier layer, this requires us to modify the argument type of a bloom filter's BPF_FUNC_map_peek_elem call to ARG_PTR_TO_MAP_VALUE; as well, in the syscall layer, we need to copy over the user value so that in bpf_map_peek_elem, we know which specific value to query. A few things to please take note of: * If there are any concurrent lookups + updates, the user is responsible for synchronizing this to ensure no false negative lookups occur. * The number of hashes to use for the bloom filter is configurable from userspace. If no number is specified, the default used will be 5 hash functions. The benchmarks later in this patchset can help compare the performance of using different number of hashes on different entry sizes. In general, using more hashes decreases both the false positive rate and the speed of a lookup. * Deleting an element in the bloom filter map is not supported. * The bloom filter map may be used as an inner map. * The "max_entries" size that is specified at map creation time is used to approximate a reasonable bitmap size for the bloom filter, and is not otherwise strictly enforced. If the user wishes to insert more entries into the bloom filter than "max_entries", they may do so but they should be aware that this may lead to a higher false positive rate. Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211027234504.30744-2-joannekoong@fb.com
2021-10-28Merge branch irq/misc-5.16 into irq/irqchip-nextMarc Zyngier
* irq/misc-5.16: : . : Misc irqchip fixes for 5.16: : - MAINTAINERS update for the ARM VIC DT binding : - Allow drivers using the IRQCHIP_PLATFORM_DRIVER_BEGIN/END : infrastructure to use COMPILE_TEST without CONFIG_OF : - DT updates : - Detangle h8300 linux/irqchip.h inclusion : . h8300: Fix linux/irqchip.h include mess dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings irqchip: Fix compile-testing without CONFIG_OF MAINTAINERS: update arm,vic.yaml reference Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-28h8300: Fix linux/irqchip.h include messMarc Zyngier
h8300 drags linux/irqchip.h from asm/irq.h, which is in general a bad idea (asm/*.h should avoid dragging linux/*.h, as it is usually supposed to work the other way around). Move the inclusion of linux/irqchip.h to the single location where it actually matters in the arch code. Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211028172849.GA701812@roeck-us.net
2021-10-28Merge tag 'drm-fixes-2021-10-29' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Quiet but not too quiet, I blame Halloween. The first set of amdgpu fixes missed last week, hence why this has a few more of them, it's mostly display fixes for new GPUs and some debugfs OOB stuff. The i915 patches have one to remove a tracepoint possible issue before it's a real problem, the others around cflush and display are cc'ed to stable as well. Otherwise it's just a few misc fixes. Summary: MAINTAINERS: - Fix the path pattern ttm: - Fix fence leak in ttm_transfered_destroy. core: - Add GPD Win3 rotation quirk i915: - Remove unconditional clflushes - Fix oops on boot due to sync state on disabled DP encoders - Revert backend specific data added to tracepoints - Remove useless and incorrect memory frequence calculation panel: - Add quirk for Aya Neo 2021 seltest: - Reset property count for each drm damage selftest so full run will work correctly. amdgpu: - Fix two potential out of bounds writes in debugfs - Fix revision handling for Yellow Carp - Display fixes for Yellow Carp - Display fixes for DCN 3.1" * tag 'drm-fixes-2021-10-29' of git://anongit.freedesktop.org/drm/drm: (21 commits) MAINTAINERS: dri-devel is for all of drivers/gpu drm/i915: Revert 'guc_id' from i915_request tracepoint drm/amd/display: Fix deadlock when falling back to v2 from v3 drm/amd/display: Fallback to clocks which meet requested voltage on DCN31 drm/amdgpu: Fix even more out of bound writes from debugfs drm: panel-orientation-quirks: Add quirk for GPD Win3 drm/i915/dp: Skip the HW readout of DPCD on disabled encoders drm/i915: Catch yet another unconditioal clflush drm/i915: Convert unconditional clflush to drm_clflush_virt_range() drm/i915/selftests: Properly reset mock object propers for each test drm: panel-orientation-quirks: Add quirk for Aya Neo 2021 drm/ttm: fix memleak in ttm_transfered_destroy drm/amdgpu: support B0&B1 external revision id for yellow carp drm/amd/display: Moved dccg init to after bios golden init drm/amd/display: Increase watermark latencies for DCN3.1 drm/amd/display: increase Z9 latency to workaround underflow in Z9 drm/amd/display: Require immediate flip support for DCN3.1 planes drm/amd/display: Fix prefetch bandwidth calculation for DCN3.1 drm/amd/display: Limit display scaling to up to true 4k for DCN 3.1 drm/amdgpu: fix out of bounds write ...
2021-10-29MAINTAINERS: dri-devel is for all of drivers/gpuDaniel Vetter
Somehow we only have a list of subdirectories, which apparently made it harder for folks to find the gpu maintainers. Fix that. References: https://lore.kernel.org/dri-devel/YXrAAZlxxStNFG%2FK@phenom.ffwll.local/ Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211028170857.4029606-1-daniel.vetter@ffwll.ch
2021-10-29Merge tag 'drm-intel-fixes-2021-10-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15 final: - Remove unconditional clflushes - Fix oops on boot due to sync state on disabled DP encoders - Revert backend specific data added to tracepoints - Remove useless and incorrect memory frequence calculation Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8735olh27y.fsf@intel.com
2021-10-28x86/Makefile: Remove unneeded whitespaces before tabsElyes HAOUAS
Align the FDINITRD line to the FDARGS one with tabs. [ bp: Commit message. ] Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211028121021.10384-1-ehaouas@noos.fr
2021-10-28block: improve readability of blk_mq_end_request_batch()Jens Axboe
It's faster and easier to read if we tolerate cur_hctx being NULL in the "when to flush" condition. Rename last_hctx to cur_hctx while at it, as it better describes the role of that variable. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-28ice: fix error return code in ice_get_recp_frm_fw()Wang Hai
Return error code if devm_kmemdup() fails in ice_get_recp_frm_fw() Fixes: fd2a6b71e300 ("ice: create advanced switch recipe") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28ice: Fix clang -Wimplicit-fallthrough in ice_pull_qvec_from_rc()Nathan Chancellor
Clang warns: drivers/net/ethernet/intel/ice/ice_lib.c:1906:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough] default: ^ drivers/net/ethernet/intel/ice/ice_lib.c:1906:2: note: insert 'break;' to avoid fall-through default: ^ break; 1 error generated. Clang is a little more pedantic than GCC, which does not warn when falling through to a case that is just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing break to silence the warning. Link: https://github.com/ClangBuiltLinux/linux/issues/1482 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28ice: Add support to print error on PHY FW load failureBrett Creeley
Some devices have support for loading the PHY FW and in some cases this can fail. When this fails, the FW will set the corresponding bit in the link info structure. Also, the FW will send a link event if the correct link event mask bit is set. Add support for printing an error message when the PHY FW load fails during any link configuration flow and the link event flow. Since ice_check_module_power() is already doing something very similar add a new function ice_check_link_cfg_err() so any failures reported in the link info's link_cfg_err member can be printed in this one function. Also, add the new ICE_FLAG_PHY_FW_LOAD_FAILED bit to the PF's flags so we don't constantly print this error message during link polling if the value never changed. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28ice: Add support for changing MTU on PR in switchdev modeMarcin Szycik
This change adds support for changing MTU on port representor in switchdev mode, by setting the min/max MTU values on port representor netdev. Before it was possible to change the MTU only in a limited, default range (68-1500). Signed-off-by: Marcin Szycik <marcin.szycik@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28ice: send correct vc status in switchdevMichal Swiatkowski
Part of virtchannel messages are treated in different way in switchdev mode to block configuring VFs from iavf driver side. This blocking was done by doing nothing and returning success, event without sending response. Not sending response for opcodes that aren't supported in switchdev mode leads to block iavf driver message handling. This happens for example when vlan is configured at VF config time (VLAN module is already loaded). To get rid of it ice driver should answer for each VF message. In switchdev mode: - for adding/deleting VLAN driver should answer success without doing anything to allow creating vlan device on VFs - for enabling/disabling VLAN stripping and promiscuous mode driver should answer not supported, this feature in switchdev can be only set from host side Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28ice: support for GRE in eswitchMichal Swiatkowski
Mostly reuse code from Geneve and VXLAN in TC parsing code. Add new GRE header to match on correct fields. Create new dummy packets with GRE fields. Instead of checking if any encap values are presented in TC flower, check if device is tunnel type or redirect is to tunnel device. This will allow adding all combination of rules. For example filters only with inner fields. Return error in case device isn't tunnel but encap values are presented. gre example: - create tunnel device ip l add $NVGRE_DEV type gretap remote $NVGRE_REM_IP local $VF1_IP \ dev $PF - add tc filter (in switchdev mode) tc filter add dev $NVGRE_DEV protocol ip parent ffff: flower dst_ip \ $NVGRE1_IP action mirred egress redirect dev $VF1_PR Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28ice: low level support for tunnelsMichal Swiatkowski
Add definition of UDP tunnel dummy packets. Fill destination port value in filter based on UDP tunnel port. Append tunnel flags to switch filter definition in case of matching the tunnel. Both VXLAN and Geneve are UDP tunnels, so only one new header is needed. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28ice: VXLAN and Geneve TC supportMichal Swiatkowski
Add definition for VXLAN and Geneve dummy packet. Define VXLAN and Geneve type of fields to match on correct UDP tunnel header. Parse tunnel specific fields from TC tool like outer MACs, outer IPs, outer destination port and VNI. Save values and masks in outer header struct and move header pointer to inner to simplify parsing inner values. There are two cases for redirect action: - from uplink to VF - TC filter is added on tunnel device - from VF to uplink - TC filter is added on PR, for this case check if redirect device is tunnel device VXLAN example: - create tunnel device ip l add $VXLAN_DEV type vxlan id $VXLAN_VNI dstport $VXLAN_PORT \ dev $PF - add TC filter (in switchdev mode) tc filter add dev $VXLAN_DEV protocol ip parent ffff: flower \ enc_dst_ip $VF1_IP enc_key_id $VXLAN_VNI action mirred egress \ redirect dev $VF1_PR Geneve example: - create tunnel device ip l add $GENEVE_DEV type geneve id $GENEVE_VNI dstport $GENEVE_PORT \ remote $GENEVE_IP - add TC filter (in switchdev mode) tc filter add dev $GENEVE_DEV protocol ip parent ffff: flower \ enc_key_id $GENEVE_VNI dst_ip $GENEVE1_IP action mirred egress \ redirect dev $VF1_PR Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28ice: support for indirect notificationMichal Swiatkowski
Implement indirect notification mechanism to support offloading TC rules on tunnel devices. Keep indirect block list in netdev priv. Notification will call setting tc cls flower function. For now we can offload only ingress type. Return not supported for other flow block binder. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28nouveau/svm: Use kvcalloc() instead of kvzalloc()Gustavo A. R. Silva
Use 2-factor argument form kvcalloc() instead of kvzalloc(). Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org>
2021-10-28Merge tag 'net-5.15-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from WiFi (mac80211), and BPF. Current release - regressions: - skb_expand_head: adjust skb->truesize to fix socket memory accounting - mptcp: fix corrupt receiver key in MPC + data + checksum Previous releases - regressions: - multicast: calculate csum of looped-back and forwarded packets - cgroup: fix memory leak caused by missing cgroup_bpf_offline - cfg80211: fix management registrations locking, prevent list corruption - cfg80211: correct false positive in bridge/4addr mode check - tcp_bpf: fix race in the tcp_bpf_send_verdict resulting in reusing previous verdict Previous releases - always broken: - sctp: enhancements for the verification tag, prevent attackers from killing SCTP sessions - tipc: fix size validations for the MSG_CRYPTO type - mac80211: mesh: fix HE operation element length check, prevent out of bound access - tls: fix sign of socket errors, prevent positive error codes being reported from read()/write() - cfg80211: scan: extend RCU protection in cfg80211_add_nontrans_list() - implement ->sock_is_readable() for UDP and AF_UNIX, fix poll() for sockets in a BPF sockmap - bpf: fix potential race in tail call compatibility check resulting in two operations which would make the map incompatible succeeding - bpf: prevent increasing bpf_jit_limit above max - bpf: fix error usage of map_fd and fdget() in generic batch update - phy: ethtool: lock the phy for consistency of results - prevent infinite while loop in skb_tx_hash() when Tx races with driver reconfiguring the queue <> traffic class mapping - usbnet: fixes for bad HW conjured by syzbot - xen: stop tx queues during live migration, prevent UAF - net-sysfs: initialize uid and gid before calling net_ns_get_ownership - mlxsw: prevent Rx stalls under memory pressure" * tag 'net-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) Revert "net: hns3: fix pause config problem after autoneg disabled" mptcp: fix corrupt receiver key in MPC + data + checksum riscv, bpf: Fix potential NULL dereference octeontx2-af: Fix possible null pointer dereference. octeontx2-af: Display all enabled PF VF rsrc_alloc entries. octeontx2-af: Check whether ipolicers exists net: ethernet: microchip: lan743x: Fix skb allocation failure net/tls: Fix flipped sign in async_wait.err assignment net/tls: Fix flipped sign in tls_err_abort() calls net/smc: Correct spelling mistake to TCPF_SYN_RECV net/smc: Fix smc_link->llc_testlink_time overflow nfp: bpf: relax prog rejection for mtu check through max_pkt_offset vmxnet3: do not stop tx queues after netif_device_detach() r8169: Add device 10ec:8162 to driver r8169 ptp: Document the PTP_CLK_MAGIC ioctl number usbnet: fix error return code in usbnet_probe() net: hns3: adjust string spaces of some parameters of tx bd info in debugfs net: hns3: expand buffer len for some debugfs command net: hns3: add more string spaces for dumping packets number of queue info in debugfs net: hns3: fix data endian problem of some functions of debugfs ...
2021-10-28Merge tag 'spi-fix-v5.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of final driver specific fixes for v5.15, one fixing potential ID collisions between two instances of the Altera driver and one making Microwire full duplex mode actually work on pl022" * tag 'spi-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spl022: fix Microwire full duplex mode spi: altera: Change to dynamic allocation of spi id
2021-10-28Merge tag 'regmap-fix-v5.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "This fixes a potential double free when handling an out of memory error inserting a node into an rbtree regcache" * tag 'regmap-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix possible double-free in regcache_rbtree_exit()
2021-10-28Merge tag 'linux-watchdog-5.15-rc7' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: "I overlooked Guenters request to sent this upstream earlier, so it's a bit late in the release cycle. This contains: - Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout" - sbsa: only use 32-bit accessors - sbsa: drop unneeded MODULE_ALIAS - ixp4xx_wdt: Fix address space warning - Fix OMAP watchdog early handling" * tag 'linux-watchdog-5.15-rc7' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Fix OMAP watchdog early handling watchdog: ixp4xx_wdt: Fix address space warning watchdog: sbsa: drop unneeded MODULE_ALIAS watchdog: sbsa: only use 32-bit accessors Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout"
2021-10-28Merge tag 'trace-v5.15-rc6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Do not WARN when attaching event probe to non-existent event If the user tries to attach an event probe (eprobe) to an event that does not exist, it will trigger a warning. There's an error check that only expects memory issues otherwise it is considered a bug. But changes in the code to move around the locking made it that it can error out if the user attempts to attach to an event that does not exist, returning an -ENODEV. As this path can be caused by user space putting in a bad value, do not trigger a WARN" * tag 'trace-v5.15-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not warn when connecting eprobe to non existing event
2021-10-28Revert "net: hns3: fix pause config problem after autoneg disabled"Guangbin Huang
This reverts commit 3bda2e5df476417b6d08967e2d84234a59d57b1c. According to discussion with Andrew as follow: https://lore.kernel.org/netdev/09eda9fe-196b-006b-6f01-f54e75715961@huawei.com/ HNS3 driver needs to separate pause autoneg from general autoneg, so revert this incorrect patch. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Link: https://lore.kernel.org/r/20211028140624.53149-1-huangguangbin2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28mptcp: fix corrupt receiver key in MPC + data + checksumDavide Caratti
using packetdrill it's possible to observe that the receiver key contains random values when clients transmit MP_CAPABLE with data and checksum (as specified in RFC8684 §3.1). Fix the layout of mptcp_out_options, to avoid using the skb extension copy when writing the MP_CAPABLE sub-option. Fixes: d7b269083786 ("mptcp: shrink mptcp_out_options struct") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/233 Reported-by: Poorva Sonparote <psonparo@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20211027203855.264600-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28riscv, bpf: Fix potential NULL dereferenceBjörn Töpel
The bpf_jit_binary_free() function requires a non-NULL argument. When the RISC-V BPF JIT fails to converge in NR_JIT_ITERATIONS steps, jit_data->header will be NULL, which triggers a NULL dereference. Avoid this by checking the argument, prior calling the function. Fixes: ca6cb5447cec ("riscv, bpf: Factor common RISC-V JIT code") Signed-off-by: Björn Töpel <bjorn@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20211028125115.514587-1-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28ACPI: glue: Use acpi_device_adr() in acpi_find_child_device()Rafael J. Wysocki
Instead of evaluating _ADR in acpi_find_child_device(), use the observation that it has already been evaluated and the value returned by it has been stored in the pnp.type.bus_address field of the ACPI device object at hand. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-28net: virtio: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Even though the current code uses dev->addr_len the we can switch to eth_hw_addr_set() instead of dev_addr_set(). The netdev is always allocated by alloc_etherdev_mq() and there are at least two places which assume Ethernet address: - the line below calling eth_hw_addr_random() - virtnet_set_mac_address() -> eth_commit_mac_addr_change() Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211027152012.3393077-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28KVM: x86: Take srcu lock in post_kvm_run_save()David Woodhouse
The Xen interrupt injection for event channels relies on accessing the guest's vcpu_info structure in __kvm_xen_has_interrupt(), through a gfn_to_hva_cache. This requires the srcu lock to be held, which is mostly the case except for this code path: [ 11.822877] WARNING: suspicious RCU usage [ 11.822965] ----------------------------- [ 11.823013] include/linux/kvm_host.h:664 suspicious rcu_dereference_check() usage! [ 11.823131] [ 11.823131] other info that might help us debug this: [ 11.823131] [ 11.823196] [ 11.823196] rcu_scheduler_active = 2, debug_locks = 1 [ 11.823253] 1 lock held by dom:0/90: [ 11.823292] #0: ffff998956ec8118 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x680 [ 11.823379] [ 11.823379] stack backtrace: [ 11.823428] CPU: 2 PID: 90 Comm: dom:0 Kdump: loaded Not tainted 5.4.34+ #5 [ 11.823496] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 11.823612] Call Trace: [ 11.823645] dump_stack+0x7a/0xa5 [ 11.823681] lockdep_rcu_suspicious+0xc5/0x100 [ 11.823726] __kvm_xen_has_interrupt+0x179/0x190 [ 11.823773] kvm_cpu_has_extint+0x6d/0x90 [ 11.823813] kvm_cpu_accept_dm_intr+0xd/0x40 [ 11.823853] kvm_vcpu_ready_for_interrupt_injection+0x20/0x30 < post_kvm_run_save() inlined here > [ 11.823906] kvm_arch_vcpu_ioctl_run+0x135/0x6a0 [ 11.823947] kvm_vcpu_ioctl+0x263/0x680 Fixes: 40da8ccd724f ("KVM: x86/xen: Add event channel interrupt vector upcall") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Message-Id: <606aaaf29fca3850a63aa4499826104e77a72346.camel@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-28Merge tag 'nvme-5.16-2021-10-28' of git://git.infradead.org/nvme into ↵Jens Axboe
for-5.16/drivers Pull NVMe updates from Christoph: "nvme updates for Linux 5.16 - support the current discovery subsystem entry (Hannes Reinecke) - use flex_array_size and struct_size (Len Baker)" * tag 'nvme-5.16-2021-10-28' of git://git.infradead.org/nvme: nvmet: use flex_array_size and struct_size nvmet: register discovery subsystem as 'current' nvmet: switch check for subsystem type nvme: add new discovery log page entry definitions
2021-10-28Merge tag 'nvme-5.15-2021-10-28' of git://git.infradead.org/nvme into block-5.15Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixe for Linux 5.15 - fix nvmet-tcp header digest verification (Amit Engel) - fix a memory leak in nvmet-tcp when releasing a queue (Maurizio Lombardi) - fix nvme-tcp H2CData PDU send accounting again (Sagi Grimberg) - fix digest pointer calculation in nvme-tcp and nvmet-tcp (Varun Prakash) - fix possible nvme-tcp req->offset corruption (Varun Prakash)" * tag 'nvme-5.15-2021-10-28' of git://git.infradead.org/nvme: nvmet-tcp: fix header digest verification nvmet-tcp: fix data digest pointer calculation nvme-tcp: fix data digest pointer calculation nvme-tcp: fix possible req->offset corruption nvme-tcp: fix H2CData PDU send accounting (again) nvmet-tcp: fix a memory leak when releasing a queue
2021-10-28devlink: Simplify internal devlink params implementationLeon Romanovsky
Reduce extra indirection from devlink_params_*() API. Such change makes it clear that we can drop devlink->lock from these flows, because everything is executed when the devlink is not registered yet. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28Merge branch 'octeontx2-debugfs-updates'David S. Miller
Rakesh Babu Saladi says: ==================== RVU Debugfs updates. Patch 1: Few minor changes such as spelling mistakes, deleting unwanted characters, etc. Patch 2: Add debugfs dump for lmtst map table Patch 3: Add channel and channel mask in debugfs. Changes made from v2 to v3: 1. In patch 1 moved few lines and submitted those changes as a different patch to net branch 2. Patch 2 is left unchanged. 3. Patch 3 is left unchanged. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28octeontx2-af: debugfs: Add channel and channel mask.Rakesh Babu
This patch is to dispaly channel and channel_mask for each RX interface of NPC MCAM rule. Signed-off-by: Rakesh Babu <rsaladi2@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28octeontx2-af: cn10k: debugfs for dumping LMTST map tableHarman Kalra
CN10k SoCs use atomic stores of up to 128 bytes to submit packets/instructions into co-processor cores. The enqueueing is performed using Large Memory Transaction Store (LMTST) operations. They allow for lockless enqueue operations - i.e., two different CPU cores can submit instructions to the same queue without needing to lock the queue or synchronize their accesses. This patch implements a new debugfs entry for dumping LMTST map table present on CN10K, as this might be very useful to debug any issue in case of shared LMTST region among multiple pci functions. Signed-off-by: Harman Kalra <hkalra@marvell.com> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com> Signed-off-by: Rakesh Babu <rsaladi2@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28octeontx2-af: debugfs: Minor changes.Rakesh Babu Saladi
Few changes in rvu_debugfs.c file to remove unwanted characters, indenting the code, added a new comment line etc. Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28Merge branch 'octeontx2-debugfs-fixes'David S. Miller
Rakesh Babu Saladi says: ==================== RVU Debugfs fix updates. The following patch series consists of the patch fixes done over rvu_debugfs.c and rvu_nix.c files. Patch 1: Check and return if ipolicers do not exists. Patch 2: Fix rsrc_alloc to print all enabled PF/VF entries with list of LFs allocated for each functional block. Patch 3: Fix possible null pointer dereference. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 20:14:22 +0000