summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-15Bluetooth: Remove bogus inline declaration from l2cap_chan_connectJohan Hedberg
As reported by Dan Carpenter this function causes a Sparse warning and shouldn't be declared inline: include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a definition" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-15Bluetooth: Don't mark non xfer isoc endpoint URBs with URB_ISO_ASAPDaniel Wagner
[ 2096.384084] btusb_send_frame:684: hci0 [ 2096.384087] usb 3-1: BOGUS urb flags, 2 --> 0 [ 2096.384091] Bluetooth: hci0 urb ffff8801b61d3a80 submission failed (22) According the documentation in usb_submit_urb() URB_ISO_ASAP flag is only allowed for endpoints of type USB_ENDPOINT_XFER_ISOC. This reverts commit b8aabfc92249b239c425da7e4ca85b7e4855e984. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: Fix l2cap conn failures for ssp devicesPeter Hurley
Commit 330605423c fixed l2cap conn establishment for non-ssp remote devices by not setting HCI_CONN_ENCRYPT_PEND every time conn security is tested (which was always returning failure on any subsequent security checks). However, this broke l2cap conn establishment for ssp remote devices when an ACL link was already established at SDP-level security. This fix ensures that encryption must be pending whenever authentication is also pending. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15ARM: 7324/1: modpost: Fix section warnings for ARM for many compilersTony Lindgren
It turns out that many compilers don't show section warnings on ARM currently because handling for ARM_CALL relocs are missing from modpost.c. Based on commit c2e26114 ([ARM] 3205/1: Handle new EABI relocations when loading kernel modules) it seems that R_ARM_PC24, R_ARM_CALL and R_ARM_JUMP24 can be handled the same way. Note that at least Debian libc6-dev is missing defines for both R_ARM_CALL and R_ARM_JUMP24 in /usr/include/elf.h. So for now we need to define them in modpost.c if not defined. Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-15ARM: 7323/1: Do not allow ARM_LPAE on pre-ARMv7 architecturesCatalin Marinas
This patch expands the Kconfig dependencies for ARM_LPAE to not allow enabling when architectures other than ARMv7 are built into the kernel. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-15genirq: Handle pending irqs in irq_startup()Thomas Gleixner
An interrupt might be pending when irq_startup() is called, but the startup code does not invoke the resend logic. In some cases this prevents the device from issuing another interrupt which renders the device non functional. Call the resend function in irq_startup() to keep things going. Reported-and-tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-02-15genirq: Unmask oneshot irqs when thread was not wokenThomas Gleixner
When the primary handler of an interrupt which is marked IRQ_ONESHOT returns IRQ_HANDLED or IRQ_NONE, then the interrupt thread is not woken and the unmask logic of the interrupt line is never invoked. This keeps the interrupt masked forever. This was not noticed as most IRQ_ONESHOT users wake the thread unconditionally (usually because they cannot access the underlying device from hard interrupt context). Though this behaviour was nowhere documented and not necessarily intentional. Some drivers can avoid the thread wakeup in certain cases and run into the situation where the interrupt line s kept masked. Handle it gracefully. Reported-and-tested-by: Lothar Wassmann <lw@karo-electronics.de> Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-02-15block: exit_io_context() should call elevator_exit_icq_fn()Tejun Heo
While updating locking, b2efa05265 "block, cfq: unlink cfq_io_context's immediately" moved elevator_exit_icq_fn() invocation from exit_io_context() to the final ioc put. While this doesn't cause catastrophic failure, it effectively removes task exit notification to elevator and cause noticeable IO performance degradation with CFQ. On task exit, CFQ used to immediately expire the slice if it was being used by the exiting task as no more IO would be issued by the task; however, after b2efa05265, the notification is lost and disk could sit idle needlessly, leading to noticeable IO performance degradation for certain workloads. This patch renames ioc_exit_icq() to ioc_destroy_icq(), separates elevator_exit_icq_fn() invocation into ioc_exit_icq() and invokes it from exit_io_context(). ICQ_EXITED flag is added to avoid invoking the callback more than once for the same icq. Walking icq_list from ioc side and invoking elevator callback requires reverse double locking. This may be better implemented using RCU; unfortunately, using RCU isn't trivial. e.g. RCU protection would need to cover request_queue and queue_lock switch on cleanup makes grabbing queue_lock from RCU unsafe. Reverse double locking should do, at least for now. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-bisected-by: Shaohua Li <shli@kernel.org> LKML-Reference: <CANejiEVzs=pUhQSTvUppkDcc2TNZyfohBRLygW5zFmXyk5A-xQ@mail.gmail.com> Tested-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-15block: simplify ioc_release_fn()Tejun Heo
Reverse double lock dancing in ioc_release_fn() can be simplified by just using trylock on the queue_lock and back out from ioc lock on trylock failure. Simplify it. Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-15block: replace icq->changed with icq->flagsTejun Heo
icq->changed was used for ICQ_*_CHANGED bits. Rename it to flags and access it under ioc->lock instead of using atomic bitops. ioc_get_changed() is added so that the changed part can be fetched and cleared as before. icq->flags will be used to carry other flags. Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-14Kbuild: Use dtc's -d (dependency) optionStephen Warren
This hooks dtc into Kbuild's dependency system. Thus, for example, "make dtbs" will rebuild tegra-harmony.dtb if only tegra20.dtsi has changed yet tegra-harmony.dts has not. The previous lack of this feature recently caused me to have very confusing "git bisect" results. For ARM, it's obvious what to add to $(targets). I'm not familiar enough with other architectures to know what to add there. Powerpc appears to already add various .dtb files into $(targets), but the other archs may need something added to $(targets) to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Mark Salter <msalter@redhat.com>
2012-02-15drm/exynos: exynos_drm.h header file fixesKamil Debski
First of all #ifdef __KERNEL__ was added to exynos_drm.h to mark the part that should be left out of userspace. Secondly exynos_drm.h was added to include/drm/Kbuild, so it will be included when doing make headers_install. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-02-15drm/exynos: added panel physical size.Eun-Chul Kim
Signed-off-by: Eun-Chul Kim <chulspro.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-02-15drm/exynos: added postclose to release resource.Inki Dae
Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-02-15drm/exynos: removed exynos_drm_fbdev_recreate function.Inki Dae
this function ins't needed anymore. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-02-15drm/exynos: fixed page flip issue.Inki Dae
with vblank_refcount = 1, there was the case that drm_vblank_put is called by specific page flip function so this patch fixes the issue. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-02-15drm/exynos: added possible_clones setup function.Inki Dae
basically, all crtcs are possible to clone each other. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-02-15drm/exynos: removed pageflip_event_list init code when closed.Joonyoung Shim
if one process is terminated by ctrl-c while two processes are using pageflip feature then for last pageflip event, user can't get poll from kernel side so this patch fixes the problem. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyoungmin Park <kyungmin.park@samsung.com>
2012-02-15drm/exynos: changed priority of mixer layers.Joonyoung Shim
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-02-15drm/exynos: Fix typo in exynos_mixer.cMasanari Iida
Correct spelling "sucessful" to "successful" in drivers/gpu/drm/exynos/exynos_mixer.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-02-14Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator One small bug fix from Axel plus a fix for a build failure in unrealistic but commonly built configs which for some reason manage to survive for an awfully long time in -next without any reports. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix getting voltage in max8649_enable_time() regulator: Fix mc13xxx regulator modular build (again)
2012-02-14Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Quoth BenH: "Here are a few powerpc fixes for 3.3, all pretty trivial. I also added the patch to define GET_IP/SET_IP so we can use some more asm-generic goodness." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries/eeh: Fix crash when error happens during device probe powerpc/pseries: Fix partition migration hang in stop_topology_update powerpc/powernv: Disable interrupts while taking phb->lock powerpc: Fix WARN_ON in decrementer_check_overflow powerpc/wsp: Fix IRQ affinity setting powerpc: Implement GET_IP/SET_IP powerpc/wsp: Permanently enable PCI class code workaround
2012-02-14Merge tag 'mmc-fixes-for-3.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc MMC fixes for 3.3-rc4: * The most visible fix here is against a regression introduced in 3.3-rc1 that ran cards in Ultra High Speed mode even when they failed to initialize in that mode, leading to lower-speed cards failing to mount. * A lockdep warning introduced in 3.3-rc1 is fixed. * Various other small driver fixes, most notably for a NULL dereference when using highmem with dw_mmc. * tag 'mmc-fixes-for-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: dw_mmc: Fix PIO mode with support of highmem mmc: atmel-mci: save and restore sdioirq when soft reset is performed mmc: block: Init ro_lock sysfs attr to fix lockdep warnings mmc: sh_mmcif: fix late delayed work initialisation mmc: tmio_mmc: fix card eject during IO with DMA mmc: core: Fix comparison issue in mmc_compare_ext_csds mmc: core: Fix PowerOff Notify suspend/resume mmc: sdhci-pci: set Medfield SDIO as non-removable mmc: core: add the capability for broken voltage mmc: core: Fix low speed mmc card detection failure mmc: esdhc: set the timeout to the max value mmc: esdhc: add PIO mode support mmc: core: Ensure clocks are always enabled before host interaction mmc: of_mmc_spi: fix little endian support mmc: core: UHS sdio card that fails should not exceed 50MHz mmc: esdhc: fix errors when booting kernel on Freescale eSDHC version 2.3
2012-02-14Merge tag 'stable/for-linus-fixes-3.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Two fixes for VCPU offlining; One to fix the string format exposed by the xen-pci[front|back] to conform to the one used in majority of PCI drivers; Two fixes to make the code more resilient to invalid configurations. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> * tag 'stable/for-linus-fixes-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus_dev: add missing error check to watch handling xen/pci[front|back]: Use %d instead of %1x for displaying PCI devfn. xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic. xen/bootup: During bootup suppress XENBUS: Unable to read cpu state
2012-02-14USB: option: cleanup zte 3g-dongle's pid in option.cli.rui27@zte.com.cn
1. Remove all old mass-storage ids's pid: 0x0026,0x0053,0x0098,0x0099,0x0149,0x0150,0x0160; 2. As the pid from 0x1401 to 0x1510 which have not surely assigned to use for serial-port or mass-storage port,so i think it should be removed now, and will re-add after it have assigned in future; 3. sort the pid to WCDMA and CDMA. Signed-off-by: Rui li <li.rui27@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-14Merge tag 'for-usb-linus-2012-02-14' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus xHCI bug fix for broken BIOS on some Intel systems. Happy Valentine's Day! Your present is a working xHCI driver under some Intel systems with buggy BIOSes that don't provide a legacy PCI IRQ line for the USB 3.0 host. Please queue for 3.3 and stable to share the love!
2012-02-14ASoC: wm8962: Fix sidetone enumeration textsMark Brown
The sidetone enumeration texts have left and right swapped. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-143c59x: shorten timer period for slave devicesEric Dumazet
Jean Delvare reported bonding on top of 3c59x adapters was not detecting network cable removal fast enough. 3c59x indeed uses a 60 seconds timer to check link status if carrier is on, and 5 seconds if carrier is off. This patch reduces timer period to 5 seconds if device is a bonding slave. Reported-by: Jean Delvare <jdelvare@suse.de> Acked-by: Jean Delvare <jdelvare@suse.de> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14netpoll: netpoll_poll_dev() should access dev->flagsEric Dumazet
commit 5a698af53f (bond: service netpoll arp queue on master device) tested IFF_SLAVE flag against dev->priv_flags instead of dev->flags Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14ARM: OMAP2+: usb-host: fix compile warningFelipe Balbi
when commit 3528c58 (OMAP: omap_device: when building return platform_device instead of omap_device) started returning a platform_device instead of a omap_device pointer when building a device, it failed to convert all users introducing a compile warning when building arch/arm/mach-omap2/usb-host.c. This patch fixes that warning. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-14ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callbackSantosh Shilimkar
arm_memblock_steal() is not suppose to be used outside ->reserve callback. OMAP barrier errata code was using it outside reserve callback and hence it was broken. Move the allocation as part of ->reserve callback to fix the it. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-14RxRPC: Fix kcalloc parameters swappedAxel Lin
The first parameter should be "number of elements" and the second parameter should be "element size". Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14bnx2x: remove the 'poll' module optionMichal Schmidt
'poll' was a debugging option, but turning it on these days leads to kernel panic. Remove it. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14tcp: fix tcp_shifted_skb() adjustment of lost_cnt_hint for FACKNeal Cardwell
This commit ensures that lost_cnt_hint is correctly updated in tcp_shifted_skb() for FACK TCP senders. The lost_cnt_hint adjustment in tcp_sacktag_one() only applies to non-FACK senders, so FACK senders need their own adjustment. This applies the spirit of 1e5289e121372a3494402b1b131b41bfe1cf9b7f - except now that the sequence range passed into tcp_sacktag_one() is correct we need only have a special case adjustment for FACK. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14[media] xc5000: declare firmware configuration structures as static constMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] xc5000: drivers should specify chip revision rather than firmwareMichael Krufky
Specify chip revision at attach time rather than a firmware image. This is a better way to ensure that the correct firmware is loaded for the correct revision of the chip. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] xc5000: remove static dependencies on xc5000 created by previous ↵Michael Krufky
changesets convert the firmware configuration attach-time parameter from a pointer to an integer so as to remove the static dependency created by the previous changesets. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] remove unneeded #define's in xc5000.hMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] tveeprom: add support for Xceive XC5000C tunerMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] tuner: add support for Xceive XC5000CMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] xc5000: add XC5000C_DEFAULT_FIRMWARE: dvb-fe-xc5000c-41.024.5-31875.fwMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] xc5000: allow drivers to set desired firmware in xc5000_attachMichael Krufky
newer versions of the xc5000 silicon require newer firmware while remaining 100% driver compatible. original versions of the xc5000a continue to use the same firmware. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] lmedm04 ver 1.96 Turn off PID filter by defaultMalcolm Priestley
Problems with the PID setting stalling demux on applications like VDR and MythTV. The PID filter is now defaulted to OFF. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] dvb-core: fix DVBFE_ALGO_HW retune bugSimon Arlott
Commit 7e07222 breaks DVBFE_ALGO_HW tuning after a retune is requested, which causes bad tuning on my TBS 6920. [ 0.769091] pci 0000:06:00.0: [14f1:8852] type 0 class 0x000400 [ 19.733530] CORE cx23885[0]: subsystem: 6920:8888, board: TurboSight TBS 6920 [card=14,autodetected] [ 762.824912] cx24116_load_firmware: FW version 1.23.86.1 7e0722215a510921cbb73ab4c37477d4dcb91bf8 [media] dvb-core: Don't pass DVBv3 parameters on tune() fops Although re_tune is set to true when FESTATE_RETUNE occurs, it is never set back to false which the old code used to do when !FESTATE_RETUNE. This patch sets re_tune to false if !(state & FESTATE_RETUNE). $ szap-s2 -a 2 "Channel 5" reading channels from file '/home/simon/.szap/channels.conf' zapping to 247 'Channel 5': delivery DVB-S, modulation QPSK sat 0, frequency 10964 MHz H, symbolrate 22000000, coderate 5/6, rolloff 0.35 vpid 0x092a, apid 0x092b, sid 0x092d using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0' status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cec0 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cec0 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] [trivial] frontends: Fix typo in tda1004x.cMasanari Iida
Correct spelling "alocate" to "allocate" in drivers/media/dvb/frontends/tda1004x.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] radio/Kconfig: cleanupHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] radio-zoltrix: Convert to radio-isaHans Verkuil
Tested with v4l2-compliance, but not with actual hardware. Contact the linux-media mailinglist if you have this card! Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] radio-typhoon: Convert to radio-isaHans Verkuil
Tested with v4l2-compliance, but not with actual hardware. Contact the linux-media mailinglist if you have this card! Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] radio-trust: Convert to radio-isaHans Verkuil
Tested with v4l2-compliance, but not with actual hardware. Contact the linux-media mailinglist if you have this card! Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] radio-terratec: Convert to radio-isaHans Verkuil
Tested with v4l2-compliance, but not with actual hardware. Contact the linux-media mailinglist if you have this card! Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 09:22:41 +0000