| Age | Commit message (Collapse) | Author |
|---|
|
The helper will be used for dm-raid456 later to detect the case that
reshape can't make progress.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-5-yukuai1@huaweicloud.com
|
|
There are no functional changes for now, prepare to fix a deadlock for
dm-raid456.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-4-yukuai1@huaweicloud.com
|
|
Add new helpers:
void md_idle_sync_thread(struct mddev *mddev);
void md_frozen_sync_thread(struct mddev *mddev);
void md_unfrozen_sync_thread(struct mddev *mddev);
The helpers will be used in dm-raid in later patches to fix regressions
and prevent calling md_reap_sync_thread() directly.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-3-yukuai1@huaweicloud.com
|
|
After commit 9dbd1aa3a81c ("dm raid: add reshaping support to the
target") raid_ctr() will set MD_RECOVERY_FROZEN before md_run() and
expect to keep array frozen until resume. However, md_run() will clear
the flag by setting mddev->recovery to 0.
Before commit 1baae052cccd ("md: Don't ignore suspended array in
md_check_recovery()"), dm-raid actually relied on suspending to prevent
starting new sync_thread.
Fix this problem by keeping 'MD_RECOVERY_FROZEN' for dm-raid in
md_run().
Fixes: 1baae052cccd ("md: Don't ignore suspended array in md_check_recovery()")
Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-2-yukuai1@huaweicloud.com
|
|
This reverts commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d.
The original set [1][2] was expected to undo a suboptimal fix in [2], and
replace it with a better fix [1]. However, as reported by Dan Moulding [2]
causes an issue with raid5 with journal device.
Revert [2] for now to close the issue. We will follow up on another issue
reported by Juxiao Bi, as [2] is expected to fix it. We believe this is a
good trade-off, because the latter issue happens less freqently.
In the meanwhile, we will NOT revert [1], as it contains the right logic.
[1] commit d6e035aad6c0 ("md: bypass block throttle for superblock update")
[2] commit bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
Reported-by: Dan Moulding <dan@danm.net>
Closes: https://lore.kernel.org/linux-raid/20240123005700.9302-1-dan@danm.net/
Fixes: bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
Cc: stable@vger.kernel.org # v5.19+
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240125082131.788600-1-song@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix P2SB regression causing ACPI errors and high CPU load
- Fix error return path in amd_pmf_init_smart_pc()
* tag 'platform-drivers-x86-v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Fix missing error code in amd_pmf_init_smart_pc()
platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Multiple fixes, cleanups and documentations for Hyper-V core code and
drivers
* tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: make hv_bus const
x86/hyperv: Allow 15-bit APIC IDs for VTL platforms
x86/hyperv: Make encrypted/decrypted changes safe for load_unaligned_zeropad()
x86/mm: Regularize set_memory_p() parameters and make non-static
x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callback
Documentation: hyperv: Add overview of PCI pass-thru device support
Drivers: hv: vmbus: Update indentation in create_gpadl_header()
Drivers: hv: vmbus: Remove duplication and cleanup code in create_gpadl_header()
fbdev/hyperv_fb: Fix logic error for Gen2 VMs in hvfb_getmem()
Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory
hv_utils: Allow implicit ICTIMESYNCFLAG_SYNC
|
|
JH7100 clock controller driver depends on certain root clock names.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWw0dteXO2jw4cwGvzKcL6vmnb96C=qgPgUqNDMtF6X0Q@mail.gmail.com/
Fixes: f03606470886 ("riscv: dts: starfive: replace underscores in node names")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
syzbot found another use-after-free in ip6_route_mpath_notify() [1]
Commit f7225172f25a ("net/ipv6: prevent use after free in
ip6_route_mpath_notify") was not able to fix the root cause.
We need to defer the fib6_info_release() calls after
ip6_route_mpath_notify(), in the cleanup phase.
[1]
BUG: KASAN: slab-use-after-free in rt6_fill_node+0x1460/0x1ac0
Read of size 4 at addr ffff88809a07fc64 by task syz-executor.2/23037
CPU: 0 PID: 23037 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-01035-gea7f3cfaa588 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x167/0x540 mm/kasan/report.c:488
kasan_report+0x142/0x180 mm/kasan/report.c:601
rt6_fill_node+0x1460/0x1ac0
inet6_rt_notify+0x13b/0x290 net/ipv6/route.c:6184
ip6_route_mpath_notify net/ipv6/route.c:5198 [inline]
ip6_route_multipath_add net/ipv6/route.c:5404 [inline]
inet6_rtm_newroute+0x1d0f/0x2300 net/ipv6/route.c:5517
rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f73dd87dda9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f73de6550c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f73dd9ac050 RCX: 00007f73dd87dda9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005
RBP: 00007f73dd8ca47a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f73dd9ac050 R15: 00007ffdbdeb7858
</TASK>
Allocated by task 23037:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:372 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:389
kasan_kmalloc include/linux/kasan.h:211 [inline]
__do_kmalloc_node mm/slub.c:3981 [inline]
__kmalloc+0x22e/0x490 mm/slub.c:3994
kmalloc include/linux/slab.h:594 [inline]
kzalloc include/linux/slab.h:711 [inline]
fib6_info_alloc+0x2e/0xf0 net/ipv6/ip6_fib.c:155
ip6_route_info_create+0x445/0x12b0 net/ipv6/route.c:3758
ip6_route_multipath_add net/ipv6/route.c:5298 [inline]
inet6_rtm_newroute+0x744/0x2300 net/ipv6/route.c:5517
rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
Freed by task 16:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x4e/0x60 mm/kasan/generic.c:640
poison_slab_object+0xa6/0xe0 mm/kasan/common.c:241
__kasan_slab_free+0x34/0x70 mm/kasan/common.c:257
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2121 [inline]
slab_free mm/slub.c:4299 [inline]
kfree+0x14a/0x380 mm/slub.c:4409
rcu_do_batch kernel/rcu/tree.c:2190 [inline]
rcu_core+0xd76/0x1810 kernel/rcu/tree.c:2465
__do_softirq+0x2bb/0x942 kernel/softirq.c:553
Last potentially related work creation:
kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47
__kasan_record_aux_stack+0xae/0x100 mm/kasan/generic.c:586
__call_rcu_common kernel/rcu/tree.c:2715 [inline]
call_rcu+0x167/0xa80 kernel/rcu/tree.c:2829
fib6_info_release include/net/ip6_fib.h:341 [inline]
ip6_route_multipath_add net/ipv6/route.c:5344 [inline]
inet6_rtm_newroute+0x114d/0x2300 net/ipv6/route.c:5517
rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
The buggy address belongs to the object at ffff88809a07fc00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 100 bytes inside of
freed 512-byte region [ffff88809a07fc00, ffff88809a07fe00)
The buggy address belongs to the physical page:
page:ffffea0002681f00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9a07c
head:ffffea0002681f00 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000840 ffff888014c41c80 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 23028, tgid 23027 (syz-executor.4), ts 2340253595219, free_ts 2339107097036
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x1ea/0x210 mm/page_alloc.c:1533
prep_new_page mm/page_alloc.c:1540 [inline]
get_page_from_freelist+0x33ea/0x3580 mm/page_alloc.c:3311
__alloc_pages+0x255/0x680 mm/page_alloc.c:4567
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
alloc_slab_page+0x5f/0x160 mm/slub.c:2190
allocate_slab mm/slub.c:2354 [inline]
new_slab+0x84/0x2f0 mm/slub.c:2407
___slab_alloc+0xd17/0x13e0 mm/slub.c:3540
__slab_alloc mm/slub.c:3625 [inline]
__slab_alloc_node mm/slub.c:3678 [inline]
slab_alloc_node mm/slub.c:3850 [inline]
__do_kmalloc_node mm/slub.c:3980 [inline]
__kmalloc+0x2e0/0x490 mm/slub.c:3994
kmalloc include/linux/slab.h:594 [inline]
kzalloc include/linux/slab.h:711 [inline]
new_dir fs/proc/proc_sysctl.c:956 [inline]
get_subdir fs/proc/proc_sysctl.c:1000 [inline]
sysctl_mkdir_p fs/proc/proc_sysctl.c:1295 [inline]
__register_sysctl_table+0xb30/0x1440 fs/proc/proc_sysctl.c:1376
neigh_sysctl_register+0x416/0x500 net/core/neighbour.c:3859
devinet_sysctl_register+0xaf/0x1f0 net/ipv4/devinet.c:2644
inetdev_init+0x296/0x4d0 net/ipv4/devinet.c:286
inetdev_event+0x338/0x15c0 net/ipv4/devinet.c:1555
notifier_call_chain+0x18f/0x3b0 kernel/notifier.c:93
call_netdevice_notifiers_extack net/core/dev.c:1987 [inline]
call_netdevice_notifiers net/core/dev.c:2001 [inline]
register_netdevice+0x15b2/0x1a20 net/core/dev.c:10340
br_dev_newlink+0x27/0x100 net/bridge/br_netlink.c:1563
rtnl_newlink_create net/core/rtnetlink.c:3497 [inline]
__rtnl_newlink net/core/rtnetlink.c:3717 [inline]
rtnl_newlink+0x158f/0x20a0 net/core/rtnetlink.c:3730
page last free pid 11583 tgid 11583 stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1140 [inline]
free_unref_page_prepare+0x968/0xa90 mm/page_alloc.c:2346
free_unref_page+0x37/0x3f0 mm/page_alloc.c:2486
kasan_depopulate_vmalloc_pte+0x74/0x90 mm/kasan/shadow.c:415
apply_to_pte_range mm/memory.c:2619 [inline]
apply_to_pmd_range mm/memory.c:2663 [inline]
apply_to_pud_range mm/memory.c:2699 [inline]
apply_to_p4d_range mm/memory.c:2735 [inline]
__apply_to_page_range+0x8ec/0xe40 mm/memory.c:2769
kasan_release_vmalloc+0x9a/0xb0 mm/kasan/shadow.c:532
__purge_vmap_area_lazy+0x163f/0x1a10 mm/vmalloc.c:1770
drain_vmap_area_work+0x40/0xd0 mm/vmalloc.c:1804
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x913/0x1420 kernel/workqueue.c:2706
worker_thread+0xa5f/0x1000 kernel/workqueue.c:2787
kthread+0x2ef/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
Memory state around the buggy address:
ffff88809a07fb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88809a07fb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88809a07fc00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88809a07fc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88809a07fd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 3b1137fe7482 ("net: ipv6: Change notifications for multipath add to RTA_MULTIPATH")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240303144801.702646-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactoring of the field get conversion introduced a regression in the
legacy Wake On Lan from a magic packet with i219 devices. Rx address
copied not correctly from MAC to PHY with FIELD_GET macro.
Fixes: b9a452545075 ("intel: legacy: field get conversion")
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a frame can not be transmitted in XDP_REDIRECT
(e.g. due to a full queue), it is necessary to free
it by calling xdp_return_frame_rx_napi.
However, this is the responsibility of the caller of
the ndo_xdp_xmit (see for example bq_xmit_all in
kernel/bpf/devmap.c) and thus calling it inside
igc_xdp_xmit (which is the ndo_xdp_xmit of the igc
driver) as well will lead to memory corruption.
In fact, bq_xmit_all expects that it can return all
frames after the last successfully transmitted one.
Therefore, break for the first not transmitted frame,
but do not call xdp_return_frame_rx_napi in igc_xdp_xmit.
This is equally implemented in other Intel drivers
such as the igb.
There are two alternatives to this that were rejected:
1. Return num_frames as all the frames would have been
transmitted and release them inside igc_xdp_xmit.
While it might work technically, it is not what
the return value is meant to represent (i.e. the
number of SUCCESSFULLY transmitted packets).
2. Rework kernel/bpf/devmap.c and all drivers to
support non-consecutively dropped packets.
Besides being complex, it likely has a negative
performance impact without a significant gain
since it is anyway unlikely that the next frame
can be transmitted if the previous one was dropped.
The memory corruption can be reproduced with
the following script which leads to a kernel panic
after a few seconds. It basically generates more
traffic than a i225 NIC can transmit and pushes it
via XDP_REDIRECT from a virtual interface to the
physical interface where frames get dropped.
#!/bin/bash
INTERFACE=enp4s0
INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex`
sudo ip link add dev veth1 type veth peer name veth2
sudo ip link set up $INTERFACE
sudo ip link set up veth1
sudo ip link set up veth2
cat << EOF > redirect.bpf.c
SEC("prog")
int redirect(struct xdp_md *ctx)
{
return bpf_redirect($INTERFACE_IDX, 0);
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o
sudo ip link set veth2 xdp obj redirect.bpf.o
cat << EOF > pass.bpf.c
SEC("prog")
int pass(struct xdp_md *ctx)
{
return XDP_PASS;
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o
sudo ip link set $INTERFACE xdp obj pass.bpf.o
cat << EOF > trafgen.cfg
{
/* Ethernet Header */
0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 1, 1, # IP Src - adapt as needed
10, 0, 1, 2, # IP Dest - adapt as needed
const16(6666), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
EOF
sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp
Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Helper i40e_is_fw_ver_eq() compares incorrectly given firmware version
as it returns true when the major version of running firmware is
greater than the given major version that is wrong and results in
failure during getting of DCB configuration where this helper is used.
Fix the check and return true only if the running FW version is exactly
equals to the given version.
Reproducer:
1. Load i40e driver
2. Check dmesg output
[root@host ~]# modprobe i40e
[root@host ~]# dmesg | grep 'i40e.*DCB'
[ 74.750642] i40e 0000:02:00.0: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL
[ 74.759770] i40e 0000:02:00.0: DCB init failed -5, disabled
[ 74.966550] i40e 0000:02:00.1: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL
[ 74.975683] i40e 0000:02:00.1: DCB init failed -5, disabled
Fixes: cf488e13221f ("i40e: Add other helpers to check version of running firmware and AQ API")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix an obviously incorrect assignment, created with a typo or cut-n-paste
error.
Fixes: 5995ef88e3a8 ("ice: realloc VSI stats arrays")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The pf->dplls.lock mutex is initialized too late, after its first use.
Move it to the top of ice_dpll_init.
Note that the "err_exit" error path destroys the mutex. And the mutex is
the last thing destroyed in ice_dpll_deinit.
This fixes the following warning with CONFIG_DEBUG_MUTEXES:
ice 0000:10:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0
ice 0000:10:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link)
ice 0000:10:00.0: PTP init successful
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 410 at kernel/locking/mutex.c:587 __mutex_lock+0x773/0xd40
Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic ice(+) nvme nvme_c>
CPU: 0 PID: 410 Comm: kworker/0:4 Not tainted 6.8.0-rc5+ #3
Hardware name: HPE ProLiant DL110 Gen10 Plus/ProLiant DL110 Gen10 Plus, BIOS U56 10/19/2023
Workqueue: events work_for_cpu_fn
RIP: 0010:__mutex_lock+0x773/0xd40
Code: c0 0f 84 1d f9 ff ff 44 8b 35 0d 9c 69 01 45 85 f6 0f 85 0d f9 ff ff 48 c7 c6 12 a2 a9 85 48 c7 c7 12 f1 a>
RSP: 0018:ff7eb1a3417a7ae0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000002 RSI: ffffffff85ac2bff RDI: 00000000ffffffff
RBP: ff7eb1a3417a7b80 R08: 0000000000000000 R09: 00000000ffffbfff
R10: ff7eb1a3417a7978 R11: ff32b80f7fd2e568 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff32b7f02c50e0d8
FS: 0000000000000000(0000) GS:ff32b80efe800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b5852cc000 CR3: 000000003c43a004 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x84/0x170
? __mutex_lock+0x773/0xd40
? report_bug+0x1c7/0x1d0
? prb_read_valid+0x1b/0x30
? handle_bug+0x42/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? __mutex_lock+0x773/0xd40
? rcu_is_watching+0x11/0x50
? __kmalloc_node_track_caller+0x346/0x490
? ice_dpll_lock_status_get+0x28/0x50 [ice]
? __pfx_ice_dpll_lock_status_get+0x10/0x10 [ice]
? ice_dpll_lock_status_get+0x28/0x50 [ice]
ice_dpll_lock_status_get+0x28/0x50 [ice]
dpll_device_get_one+0x14f/0x2e0
dpll_device_event_send+0x7d/0x150
dpll_device_register+0x124/0x180
ice_dpll_init_dpll+0x7b/0xd0 [ice]
ice_dpll_init+0x224/0xa40 [ice]
? _dev_info+0x70/0x90
ice_load+0x468/0x690 [ice]
ice_probe+0x75b/0xa10 [ice]
? _raw_spin_unlock_irqrestore+0x4f/0x80
? process_one_work+0x1a3/0x500
local_pci_probe+0x47/0xa0
work_for_cpu_fn+0x17/0x30
process_one_work+0x20d/0x500
worker_thread+0x1df/0x3e0
? __pfx_worker_thread+0x10/0x10
kthread+0x103/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
irq event stamp: 125197
hardirqs last enabled at (125197): [<ffffffff8416409d>] finish_task_switch.isra.0+0x12d/0x3d0
hardirqs last disabled at (125196): [<ffffffff85134044>] __schedule+0xea4/0x19f0
softirqs last enabled at (105334): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60
softirqs last disabled at (105332): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60
---[ end trace 0000000000000000 ]---
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The function ice_bridge_setlink() may encounter a NULL pointer dereference
if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently
in nla_for_each_nested(). To address this issue, add a check to ensure that
br_spec is not NULL before proceeding with the nested attribute iteration.
Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink")
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The E800 series hardware uses the same iAVF driver as older devices,
including the virtchnl negotiation scheme.
This negotiation scheme includes a mechanism to determine what type of RSS
should be supported, including RSS over PF virtchnl messages, RSS over
firmware AdminQ messages, and RSS via direct register access.
The PF driver will always prefer VIRTCHNL_VF_OFFLOAD_RSS_PF if its
supported by the VF driver. However, if an older VF driver is loaded, it
may request only VIRTCHNL_VF_OFFLOAD_RSS_REG or VIRTCHNL_VF_OFFLOAD_RSS_AQ.
The ice driver happily agrees to support these methods. Unfortunately, the
underlying hardware does not support these mechanisms. The E800 series VFs
don't have the appropriate registers for RSS_REG. The mailbox queue used by
VFs for VF to PF communication blocks messages which do not have the
VF-to-PF opcode.
Stop lying to the VF that it could support RSS over AdminQ or registers, as
these interfaces do not work when the hardware is operating on an E800
series device.
In practice this is unlikely to be hit by any normal user. The iAVF driver
has supported RSS over PF virtchnl commands since 2016, and always defaults
to using RSS_PF if possible.
In principle, nothing actually stops the existing VF from attempting to
access the registers or send an AQ command. However a properly coded VF
will check the capability flags and will report a more useful error if it
detects a case where the driver does not support the RSS offloads that it
does.
Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Alan Brady <alan.brady@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix softirq's not being handled during napi_schedule() call when
receiving marker packets for queue disable by disabling local bottom
half.
The issue can be seen on ifdown:
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
Using ftrace to catch the failing scenario:
ifconfig [003] d.... 22739.830624: softirq_raise: vec=3 [action=NET_RX]
<idle>-0 [003] ..s.. 22739.831357: softirq_entry: vec=3 [action=NET_RX]
No interrupt and CPU is idle.
After the patch when disabling local BH before calling napi_schedule:
ifconfig [003] d.... 22993.928336: softirq_raise: vec=3 [action=NET_RX]
ifconfig [003] ..s1. 22993.928337: softirq_entry: vec=3 [action=NET_RX]
Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
On a PC Engines APU our admins are faced with:
$ dmesg | grep -c "gpio-keys-polled gpio-keys-polled: unable to claim gpio 0, err=-517"
261
Such a message always appears when e.g. a new USB device is plugged in.
Suppress this message which considerably clutters the kernel log for
EPROBE_DEFER (i.e. -517).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240305101042.10953-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This patch intended to fix an well-knonw issue in old drivers where the
endpoint type is taken for granted, which is often triggered by fuzzers.
That was the case for this driver [1], and although the fix seems to be
correct, it uncovered another issue that leads to a regression [2], if
the endpoints of the current interface are checked.
The driver makes use of endpoints that belong to a different interface
rather than the one it binds (it binds to the third interface, but also
accesses an endpoint from a different one). The driver should claim the
interfaces it requires, but that is still not the case.
Given that the regression is more severe than the issue found by
syzkaller, the best approach is reverting the patch that causes the
regression, and trying to fix the underlying problem before checking
the endpoint types again.
Note that reverting this patch will probably trigger the syzkaller bug
at some point.
This reverts commit 2b9c3eb32a699acdd4784d6b93743271b4970899.
Link: https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 [1]
Link: https://lore.kernel.org/linux-input/87sf161jjc.wl-tiwai@suse.de/ [2]
Fixes: 2b9c3eb32a69 ("Input: bcm5974 - check endpoint type before starting traffic")
Reported-by: Jacopo Radice <jacopo.radice@outlook.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220030
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240305-revert_bcm5974_ep_check-v3-1-527198cf6499@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
During fiemap we may have to visit multiple leaves of the subvolume's
inode tree, and each time we are freeing and allocating an extent buffer
to use as a clone of each visited leaf. Optimize this by reusing cloned
extent buffers, to avoid the freeing and re-allocation both of the extent
buffer structure itself and more importantly of the pages attached to the
extent buffer.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For fiemap we recently stopped locking the target extent range for the
whole duration of the fiemap call, in order to avoid a deadlock in a
scenario where the fiemap buffer happens to be a memory mapped range of
the same file. This use case is very unlikely to be useful in practice but
it may be triggered by fuzz testing (syzbot, etc).
This however introduced a race that makes us miss delalloc ranges for
file regions that are currently holes, so the caller of fiemap will not
be aware that there's data for some file regions. This can be quite
serious for some use cases - for example in coreutils versions before 9.0,
the cp program used fiemap to detect holes and data in the source file,
copying only regions with data (extents or delalloc) from the source file
to the destination file in order to preserve holes (see the documentation
for its --sparse command line option). This means that if cp was used
with a source file that had delalloc in a hole, the destination file could
end up without that data, which is effectively a data loss issue, if it
happened to hit the race described below.
The race happens like this:
1) Fiemap is called, without the FIEMAP_FLAG_SYNC flag, for a file that
has delalloc in the file range [64M, 65M[, which is currently a hole;
2) Fiemap locks the inode in shared mode, then starts iterating the
inode's subvolume tree searching for file extent items, without having
the whole fiemap target range locked in the inode's io tree - the
change introduced recently by commit b0ad381fa769 ("btrfs: fix
deadlock with fiemap and extent locking"). It only locks ranges in
the io tree when it finds a hole or prealloc extent since that
commit;
3) Note that fiemap clones each leaf before using it, and this is to
avoid deadlocks when locking a file range in the inode's io tree and
the fiemap buffer is memory mapped to some file, because writing
to the page with btrfs_page_mkwrite() will wait on any ordered extent
for the page's range and the ordered extent needs to lock the range
and may need to modify the same leaf, therefore leading to a deadlock
on the leaf;
4) While iterating the file extent items in the cloned leaf before
finding the hole in the range [64M, 65M[, the delalloc in that range
is flushed and its ordered extent completes - meaning the corresponding
file extent item is in the inode's subvolume tree, but not present in
the cloned leaf that fiemap is iterating over;
5) When fiemap finds the hole in the [64M, 65M[ range by seeing the gap in
the cloned leaf (or a file extent item with disk_bytenr == 0 in case
the NO_HOLES feature is not enabled), it will lock that file range in
the inode's io tree and then search for delalloc by checking for the
EXTENT_DELALLOC bit in the io tree for that range and ordered extents
(with btrfs_find_delalloc_in_range()). But it finds nothing since the
delalloc in that range was already flushed and the ordered extent
completed and is gone - as a result fiemap will not report that there's
delalloc or an extent for the range [64M, 65M[, so user space will be
mislead into thinking that there's a hole in that range.
This could actually be sporadically triggered with test case generic/094
from fstests, which reports a missing extent/delalloc range like this:
generic/094 2s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad)
--- tests/generic/094.out 2020-06-10 19:29:03.830519425 +0100
+++ /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad 2024-02-28 11:00:00.381071525 +0000
@@ -1,3 +1,9 @@
QA output created by 094
fiemap run with sync
fiemap run without sync
+ERROR: couldn't find extent at 7
+map is 'HHDDHPPDPHPH'
+logical: [ 5.. 6] phys: 301517.. 301518 flags: 0x800 tot: 2
+logical: [ 8.. 8] phys: 301520.. 301520 flags: 0x800 tot: 1
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/094.out /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad' to see the entire diff)
So in order to fix this, while still avoiding deadlocks in the case where
the fiemap buffer is memory mapped to the same file, change fiemap to work
like the following:
1) Always lock the whole range in the inode's io tree before starting to
iterate the inode's subvolume tree searching for file extent items,
just like we did before commit b0ad381fa769 ("btrfs: fix deadlock with
fiemap and extent locking");
2) Now instead of writing to the fiemap buffer every time we have an extent
to report, write instead to a temporary buffer (1 page), and when that
buffer becomes full, stop iterating the file extent items, unlock the
range in the io tree, release the search path, submit all the entries
kept in that buffer to the fiemap buffer, and then resume the search
for file extent items after locking again the remainder of the range in
the io tree.
The buffer having a size of a page, allows for 146 entries in a system
with 4K pages. This is a large enough value to have a good performance
by avoiding too many restarts of the search for file extent items.
In other words this preserves the huge performance gains made in the
last two years to fiemap, while avoiding the deadlocks in case the
fiemap buffer is memory mapped to the same file (useless in practice,
but possible and exercised by fuzz testing and syzbot).
Fixes: b0ad381fa769 ("btrfs: fix deadlock with fiemap and extent locking")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At contains_pending_extent() the value of the end offset of a chunk we
found in the device's allocation state io tree is inclusive, so when
we calculate the length we pass to the in_range() macro, we must sum
1 to the expression "physical_end - physical_offset".
In practice the wrong calculation should be harmless as chunks sizes
are never 1 byte and we should never have 1 byte ranges of unallocated
space. Nevertheless fix the wrong calculation.
Reported-by: Alex Lyakas <alex.lyakas@zadara.com>
Link: https://lore.kernel.org/linux-btrfs/CAOcd+r30e-f4R-5x-S7sV22RJPe7+pgwherA6xqN2_qe7o4XTg@mail.gmail.com/
Fixes: 1c11b63eff2a ("btrfs: replace pending/pinned chunks lists with io tree")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove the broken pfn_to_virt() on architectures csky/hexagon/openrisc.
The pfn_to_virt() on those architectures takes PFN instead of PA as the
input to macro __va(), with PAGE_SHIFT applying to the converted VA, which
is not right, especially when there's a non-zero offset in __va(). [1]
The broken pfn_to_virt() was noticed when checking how page_to_virt() is
unfolded on x86. It turns out that the one in linux/mm.h instead of in
asm-generic/page.h is compiled for x86. However, page_to_virt() in
asm-generic/page.h is found out expanding to pfn_to_virt() with a bug
described above. The pfn_to_virt() is found out not right as well on
architectures csky/hexagon/openrisc.
Since there's no single caller on csky/hexagon/openrisc to pfn_to_virt()
and there are functions doing similar things as pfn_to_virt() --
- pfn_to_kaddr() in asm/page.h for csky,
- page_to_virt() in asm/page.h for hexagon, and
- page_to_virt() in linux/mm.h for openrisc,
just delete the pfn_to_virt() on those architectures.
The pfn_to_virt() in asm-generic/page.h is not touched in this patch as
it's referenced by page_to_virt() in that header while the whole header is
going to be removed as a whole due to no one including it.
Link:https://lore.kernel.org/all/20240131055159.2506-1-yan.y.zhao@intel.com [1]
Cc: Linus Walleij <linus.walleij@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Even though the UDL driver converts to RGB565 internally (see
pixel32_to_be16() in udl_transfer.c), it advertises XRGB8888 for
compatibility. Let's add ARGB8888 to that list.
This makes UDL devices work on ChromeOS again after commit
c91acda3a380 ("drm/gem: Check for valid formats"). Prior to that
commit things were "working" because we'd silently treat the ARGB8888
that ChromeOS wanted as XRGB8888.
Fixes: c91acda3a380 ("drm/gem: Check for valid formats")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227141928.1.I24ac8d51544e4624b7e9d438d95880c4283e611b@changeid
|
|
As discussed on the mailing list, Chester is stepping down from being
the primary maintainer for the s32c platform, and Ghennadi becomes an
additional reviewer.
For the moment, there is no full maintainer for s32c, but Shawn is already
listed as the overall maintainer for 32-bit freescale/nxp platforms
(except layerscape and qoriq) and agreed to merge s32c patches as they
come in and are reviewed by the remaining reviewers.
Adapt the entries in the maintainers file based on the discussion.
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Chester Lin <chester62515@gmail.com>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: NXP S32 Linux Team <s32@nxp.com>
Link: https://lore.kernel.org/all/20240221120123.1118552-1-ghennadi.procopciuc@oss.nxp.com/
Link: https://lore.kernel.org/r/20240304204249.936140-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
dt-binding additions for some syscons (rk3588 usb3, hdptxphy) and a
clock addition to the rk3588 VO syscon binding.
6#
* tag 'v6.9-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: soc: rockchip: add rk3588 USB3 syscon
dt-bindings: soc: rockchip: add clock to RK3588 VO grf
dt-bindings: soc: rockchip: Add rk3588 hdptxphy syscon
Link: https://lore.kernel.org/r/5997473.alqRGMn8q6@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
same parent
Currently "btrfs subvolume snapshot -i <qgroupid>" would always mark the
qgroup inconsistent.
This can be annoying if the fs has a lot of snapshots, and needs qgroup
to get the accounting for the amount of bytes it can free for each
snapshot.
Although we have the new simple quote as a solution, there is also a
case where we can skip the full scan, if all the following conditions
are met:
- The source subvolume belongs to a higher level parent qgroup
- The parent qgroup already owns all its bytes exclusively
- The new snapshot is also added to the same parent qgroup
In that case, we only need to add nodesize to the parent qgroup and
avoid a full rescan.
This patch would add the extra quick accounting update for such inherit.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Currently btrfs can create subvolume with an invalid qgroup inherit
without triggering any error:
# mkfs.btrfs -O quota -f $dev
# mount $dev $mnt
# btrfs subvolume create -i 2/0 $mnt/subv1
# btrfs qgroup show -prce --sync $mnt
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 16.00KiB 16.00KiB subv1
[CAUSE]
We only do a very basic size check for btrfs_qgroup_inherit structure,
but never really verify if the values are correct.
Thus in btrfs_qgroup_inherit() function, we have to skip non-existing
qgroups, and never return any error.
[FIX]
Fix the behavior and introduce extra checks:
- Introduce early check for btrfs_qgroup_inherit structure
Not only the size, but also all the qgroup ids would be verified.
And the timing is very early, so we can return error early.
This early check is very important for snapshot creation, as snapshot
is delayed to transaction commit.
- Drop support for btrfs_qgroup_inherit::num_ref_copies and
num_excl_copies
Those two members are used to specify to copy refr/excl numbers from
other qgroups.
This would definitely mark qgroup inconsistent, and btrfs-progs has
dropped the support for them for a long time.
It's time to drop the support for kernel.
- Verify the supported btrfs_qgroup_inherit::flags
Just in case we want to add extra flags for btrfs_qgroup_inherit.
Now above subvolume creation would fail with -ENOENT other than silently
ignore the non-existing qgroup.
CC: stable@vger.kernel.org # 6.7+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To better debug issues surrounding device scans, include the device's
major and minor numbers in the device scan notice for btrfs.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_put_caching_control() is only used in block-group.c, so mark it
static.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Lijuan Li <lilijuan@iscas.ac.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1, so it became a dead flag since the commit
16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And the
series[1] went on to mark it obsolete to avoid confusion for users.
Here we can just remove all its users, which has no functional change.
[1] https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
If qgroup is marked inconsistent (e.g. caused by operations needing full
subtree rescan, like creating a snapshot and assign to a higher level
qgroup), btrfs would immediately start leaking its data reserved space.
The following script can easily reproduce it:
mkfs.btrfs -O quota -f $dev
mount $dev $mnt
btrfs subvolume create $mnt/subv1
btrfs qgroup create 1/0 $mnt
# This snapshot creation would mark qgroup inconsistent,
# as the ownership involves different higher level qgroup, thus
# we have to rescan both source and snapshot, which can be very
# time consuming, thus here btrfs just choose to mark qgroup
# inconsistent, and let users to determine when to do the rescan.
btrfs subv snapshot -i 1/0 $mnt/subv1 $mnt/snap1
# Now this write would lead to qgroup rsv leak.
xfs_io -f -c "pwrite 0 64k" $mnt/file1
# And at unmount time, btrfs would report 64K DATA rsv space leaked.
umount $mnt
And we would have the following dmesg output for the unmount:
BTRFS info (device dm-1): last unmount of filesystem 14a3d84e-f47b-4f72-b053-a8a36eef74d3
BTRFS warning (device dm-1): qgroup 0/5 has unreleased space, type 0 rsv 65536
[CAUSE]
Since commit e15e9f43c7ca ("btrfs: introduce
BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"),
we introduce a mode for btrfs qgroup to skip the timing consuming
backref walk, if the qgroup is already inconsistent.
But this skip also covered the data reserved freeing, thus the qgroup
reserved space for each newly created data extent would not be freed,
thus cause the leakage.
[FIX]
Make the data extent reserved space freeing mandatory.
The qgroup reserved space handling is way cheaper compared to the
backref walking part, and we always have the super sensitive leak
detector, thus it's definitely worth to always free the qgroup
reserved data space.
Reported-by: Fabian Vogt <fvogt@suse.com>
Fixes: e15e9f43c7ca ("btrfs: introduce BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting")
CC: stable@vger.kernel.org # 6.1+
Link: https://bugzilla.suse.com/show_bug.cgi?id=1216196
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There is a bug report about very suspicious tree-checker got triggered:
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
SELinux: inode_doinit_use_xattr: getxattr returned 117 for dev=dm-0
ino=5737268
[ANALYZE]
The root cause is still unclear, but there are some clues already:
- Unaligned eb bytenr
The block bytenr is 8550954455682405139, which is not even aligned to
2.
This bytenr is fetched from extent buffer header, not from eb->start.
This means, at the initial time of read, eb header bytenr is still
correct (the very basis check to continue read), but later something
wrong happened, got at least the first page corrupted.
Thus we got such obviously incorrect value.
- Invalid extent buffer header owner
The read itself is triggered for subvolume 256, but the eb header
owner is 11858205567642294356, which is not really possible.
The problem here is, subvolume id is limited to (1 << 48 - 1),
and this one definitely goes beyond that limit.
So this value is another garbage.
We already got two garbage from an extent buffer, which passed the
initial bytenr and csum checks, but later the contents become garbage at
some point.
This looks like a page lifespan problem (e.g. we didn't properly hold the
page).
[ENHANCEMENT]
The current tree-checker only outputs things from the extent buffer,
nothing with the page status.
So this patch would enhance the tree-checker output by also dumping the
first page, which would look like this:
page:00000000aa9f3ce8 refcount:4 mapcount:0 mapping:00000000169aa6b6 index:0x1d0c pfn:0x1022e5
memcg:ffff888103456000
aops:btree_aops [btrfs] ino:1
flags: 0x2ffff0000008000(private|node=0|zone=2|lastcpupid=0xffff)
page_type: 0xffffffff()
raw: 02ffff0000008000 0000000000000000 dead000000000122 ffff88811e06e220
raw: 0000000000001d0c ffff888102fdb1d8 00000004ffffffff ffff888103456000
page dumped because: eb page dump
BTRFS critical (device dm-3): corrupt leaf: root=5 block=30457856 slot=6 ino=257 file_offset=0, invalid disk_bytenr for file extent, have 10617606235235216665, should be aligned to 4096
BTRFS error (device dm-3): read time tree block corruption detected on logical 30457856 mirror 1
From the dump we can see some extra info, something can help us to do
extra cross-checks:
- Page refcount
if it's too low, it definitely means something bad.
- Page aops
Any mapped eb page should have btree_aops with inode number 1.
- Page index
Since a mapped eb page should has its bytenr matching the page
position, (index << PAGE_SHIFT) should match the bytenr of the
bytenr from the critical line.
- Page Private flags
A mapped eb page should have Private flag set to indicate it's managed
by btrfs.
Link: https://lore.kernel.org/linux-btrfs/CAHk-=whNdMaN9ntZ47XRKP6DBes2E5w7fi-0U3H2+PS18p+Pzw@mail.gmail.com/
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit a440d48c7f93 ("Btrfs: heuristic: implement sampling
logic"), btrfs_compress_heuristic() is no longer a simple "return true",
but more complex to determine if we should compress.
Thus the comment is dead and can be confusing, just remove it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For the writer counter, it's pretty much the same as the reader counter,
and they are exclusive. So move them to the new locked bitmap.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_subpage utilizes its atomic member @reader to manage the
reader counter. However it is only utilized to prevent the page to be
released/unlocked when we still have reads underway.
In that use case, we don't really allow multiple readers on the same
subpage sector. So here we can introduce a new locked bitmap to
represent exactly which subpage range is locked for read.
In theory we can remove btrfs_subpage::reader as it's just the set bits
of the new locked bitmap. But unfortunately bitmap doesn't provide such
handy API yet, so we still keep the reader counter.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_subpage_end_and_test_writer()
Both functions were introduced in commit 1e1de38792e0 ("btrfs: make
process_one_page() to handle subpage locking"), but they have never
been utilized out of subpage code. So just unexport them.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can pass a valid em cache pointer down to __get_extent_map() and
drop the validity check. This avoids the special case, the call stacks
are simple:
btrfs_read_folio
btrfs_do_readpage
__get_extent_map
extent_readahead
contiguous_readpages
btrfs_do_readpage
__get_extent_map
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the fcloop_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the nvmf_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the structures nvme_class, nvme_subsys_class and
nvme_ns_chr_class to be declared at build time placing them into read-only
memory, instead of having to be dynamically allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The documented vendor prefix for LG Electronics is 'lg' not 'lge'. Just
change the example to 'lg' as there doesn't appear to be any dependency
on the existing compatible string.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20240305152131.3424326-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On Arrow Lake S systems, MEI is no longer strictly connected to bus 0,
while graphics remain exclusively on bus 0. Adapt the component
matching logic to accommodate this change:
Original behavior: Required both MEI and graphics to be on the same
bus 0.
New behavior: Only enforces graphics to be on bus 0 (integrated),
allowing MEI to reside on any bus.
This ensures compatibility with Arrow Lake S and maintains functionality
for the legacy systems.
Fixes: 1dd924f6885b ("mei: gsc_proxy: add gsc proxy driver")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240220200020.231192-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For CMA memory allocation, ownership is assigned to DSP to make it
accessible by the PD running on the DSP. With current implementation
HLOS VM is stored in the channel structure during rpmsg_probe and
this VM is passed to qcom_scm call as the source VM.
The qcom_scm call will overwrite the passed source VM with the next
VM which would cause a problem in case the scm call is again needed.
Adding a local copy of source VM whereever scm call is made to avoid
this problem.
Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240224114247.85953-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comedi_test devices have a couple of timers (ai_timer and ao_timer)
that can be started to simulate hardware interrupts. Their expiry
functions normally reschedule the timer. The driver code calls either
del_timer_sync() or del_timer() to delete the timers from the queue, but
does not currently prevent the timers from rescheduling themselves so
synchronized deletion may be ineffective.
Add a couple of boolean members (one for each timer: ai_timer_enable and
ao_timer_enable) to the device private data structure to indicate
whether the timers are allowed to reschedule themselves. Set the member
to true when adding the timer to the queue, and to false when deleting
the timer from the queue in the waveform_ai_cancel() and
waveform_ao_cancel() functions.
The del_timer_sync() function is also called from the waveform_detach()
function, but the timer enable members will already be set to false when
that function is called, so no change is needed there.
Fixes: 403fe7f34e33 ("staging: comedi: comedi_test: fix timer race conditions")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240214100747.16203-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The refactoring done in commit 5c57b1ccecc7 ("comedi: comedi_8255: Rework
subdevice initialization functions") to the initialization of the io
field of struct subdev_8255_private broke all cards using the
drivers/comedi/drivers/comedi_8255.c module.
Prior to 5c57b1ccecc7, __subdev_8255_init() initialized the io field
in the newly allocated struct subdev_8255_private to the non-NULL
callback given to the function, otherwise it used a flag parameter to
select between subdev_8255_mmio and subdev_8255_io. The refactoring
removed that logic and the flag, as subdev_8255_mm_init() and
subdev_8255_io_init() now explicitly pass subdev_8255_mmio and
subdev_8255_io respectively to __subdev_8255_init(), only
__subdev_8255_init() never sets spriv->io to the supplied
callback. That spriv->io is NULL leads to a later BUG:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP PTI
CPU: 1 PID: 1210 Comm: systemd-udevd Not tainted 6.7.3-x86_64 #1
Hardware name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b
RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00
RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000
R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8
FS: 00007f72f4e8f500(0000) GS:ffff91f8d5c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000010540e000 CR4: 00000000000406f0
Call Trace:
<TASK>
? __die_body+0x15/0x57
? page_fault_oops+0x2ef/0x33c
? insert_vmap_area.constprop.0+0xb6/0xd5
? alloc_vmap_area+0x529/0x5ee
? exc_page_fault+0x15a/0x489
? asm_exc_page_fault+0x22/0x30
__subdev_8255_init+0x79/0x8d [comedi_8255]
pci_8255_auto_attach+0x11a/0x139 [8255_pci]
comedi_auto_config+0xac/0x117 [comedi]
? __pfx___driver_attach+0x10/0x10
pci_device_probe+0x88/0xf9
really_probe+0x101/0x248
__driver_probe_device+0xbb/0xed
driver_probe_device+0x1a/0x72
__driver_attach+0xd4/0xed
bus_for_each_dev+0x76/0xb8
bus_add_driver+0xbe/0x1be
driver_register+0x9a/0xd8
comedi_pci_driver_register+0x28/0x48 [comedi_pci]
? __pfx_pci_8255_driver_init+0x10/0x10 [8255_pci]
do_one_initcall+0x72/0x183
do_init_module+0x5b/0x1e8
init_module_from_file+0x86/0xac
__do_sys_finit_module+0x151/0x218
do_syscall_64+0x72/0xdb
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f72f50a0cb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 71 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd47e512d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000562dd06ae070 RCX: 00007f72f50a0cb9
RDX: 0000000000000000 RSI: 00007f72f52d32df RDI: 000000000000000e
RBP: 0000000000000000 R08: 00007f72f5168b20 R09: 0000000000000000
R10: 0000000000000050 R11: 0000000000000246 R12: 00007f72f52d32df
R13: 0000000000020000 R14: 0000562dd06785c0 R15: 0000562dcfd0e9a8
</TASK>
Modules linked in: 8255_pci(+) comedi_8255 comedi_pci comedi intel_gtt e100(+) acpi_cpufreq rtc_cmos usbhid
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b
RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00
RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000
R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8
FS: 00007f72f4e8f500(0000) GS:ffff91f8d5c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000010540e000 CR4: 00000000000406f0
This patch simply corrects the above mistake by initializing spriv->io
to the given io callback.
Fixes: 5c57b1ccecc7 ("comedi: comedi_8255: Rework subdevice initialization functions")
Signed-off-by: Frej Drejhammar <frej.drejhammar@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240211175822.1357-1-frej.drejhammar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If VM_BIND is enabled on the client the legacy submission ioctl can't be
used, however if a client tries to do so regardless it will return an
error. In this case the clients mutex remained unlocked leading to a
deadlock inside nouveau_drm_postclose or any other nouveau ioctl call.
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: <stable@vger.kernel.org> # v6.6+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305133853.2214268-1-kherbst@redhat.com
|
|
Ring expansion checker may incorrectly assume a completely full ring
is empty, missing the need for expansion.
This is due to a special empty ring case where the dequeue ends up
ahead of the enqueue pointer. This is seen when enqueued TRBs fill up
exactly a segment, with enqueue then pointing to the end link TRB.
Once those TRBs are handled the dequeue pointer will follow the link
TRB and end up pointing to the first entry on the next segment, past
the enqueue.
This same enqueue - dequeue condition can be true if a ring is full,
with enqueue ending on that last link TRB before the dequeue pointer
on the next segment.
This can be seen when queuing several ~510 small URBs via usbfs in
one go before a single one is handled (i.e. dequeue not moved from first
entry in segment).
Expand the ring already when enqueue reaches the link TRB before the
dequeue segment, instead of expanding it when enqueue moves into the
dequeue segment.
Reported-by: Chris Yokum <linux-usb@mail.totalphase.com>
Closes: https://lore.kernel.org/all/949223224.833962.1709339266739.JavaMail.zimbra@totalphase.com
Tested-by: Chris Yokum <linux-usb@mail.totalphase.com>
Fixes: f5af638f0609 ("xhci: Fix transfer ring expansion size calculation")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240305132312.955171-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 5c7e105cd156fc9adf5294a83623d7a40c15f9b9.
As identified by KASAN, the simplification done by the cleanup patch
was not legal.
>From tracing through the code, it can be seen that we're transmitting
from a 4096-byte circular buffer. We copy anywhere from 1-4 bytes from
it each time. The simplification runs into trouble when we get near
the end of the circular buffer. For instance, we might start out with
xmit->tail = 4094 and we want to transfer 4 bytes. With the code
before simplification this was no problem. We'd read buf[4094],
buf[4095], buf[0], and buf[1]. With the new code we'll do a
memcpy(&buf[4094], 4) which reads 2 bytes past the end of the buffer
and then skips transmitting what's at buf[0] and buf[1].
KASAN isn't 100% consistent at reporting this for me, but to be extra
confident in the analysis, I added traces of the tail and tx_bytes and
then wrote a test program:
while true; do
echo -n "abcdefghijklmnopqrstuvwxyz0" > /dev/ttyMSM0
sleep .1
done
I watched the traces over SSH and saw:
qcom_geni_serial_send_chunk_fifo: 4093 4
qcom_geni_serial_send_chunk_fifo: 1 3
Which indicated that one byte should be missing. Sure enough the
output that should have been:
abcdefghijklmnopqrstuvwxyz0
In one case was actually missing a byte:
abcdefghijklmnopqrstuvwyz0
Running "ls -al" on large directories also made the missing bytes
obvious since columns didn't line up.
While the original code may not be the most elegant, we only talking
about copying up to 4 bytes here. Let's just go back to the code that
worked.
Fixes: 5c7e105cd156 ("tty: serial: simplify qcom_geni_serial_send_chunk_fifo()")
Cc: stable <stable@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240304174952.1.I920a314049b345efd1f69d708e7f74d2213d0b49@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the remote uart device is not connected or not enabled after booting
up, the CTS line is high by default. At this time, if we enable the flow
control when opening the device(for example, using “stty -F /dev/ttyLP4
crtscts” command), there will be a pending idle preamble(first writing 0
and then writing 1 to UARTCTRL_TE will queue an idle preamble) that
cannot be sent out, resulting in the uart port fail to close(waiting for
TX empty), so the user space stty will have to wait for a long time or
forever.
This is an LPUART IP bug(idle preamble has higher priority than CTS),
here add a workaround patch to enable TX CTS after enabling UARTCTRL_TE,
so that the idle preamble does not get stuck due to CTS is deasserted.
Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20240305015706.1050769-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
