summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: xfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set VFS: Reorganise shrink_dcache_for_umount_subtree() after demise of dcache_lock VFS: Remove dentry->d_lock locking from shrink_dcache_for_umount_subtree() VFS: Remove detached-dentry counter from shrink_dcache_for_umount_subtree() switch posix_acl_chmod() to umode_t switch posix_acl_from_mode() to umode_t switch posix_acl_equiv_mode() to umode_t * switch posix_acl_create() to umode_t * block: initialise bd_super in bdget() vfs: avoid call to inode_lru_list_del() if possible vfs: avoid taking inode_hash_lock on pipes and sockets vfs: conditionally call inode_wb_list_del() VFS: Fix automount for negative autofs dentries Btrfs: load the key from the dir item in readdir into a fake dentry devtmpfs: missing initialialization in never-hit case hppfs: missing include
2011-08-01Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (37 commits) Improve slave/cyclic DMA engine documentation dmaengine: pl08x: handle the rest of enums in pl08x_width DMA: PL08x: cleanup selection of burst size DMA: PL08x: avoid recalculating cctl at each prepare DMA: PL08x: cleanup selection of buswidth DMA: PL08x: constify plchan->cd and plat->slave_channels DMA: PL08x: separately store source/destination cctl DMA: PL08x: separately store source/destination slave address DMA: PL08x: clean up LLI debugging DMA: PL08x: select LLI bus only once per LLI setup DMA: PL08x: remove unused constants ARM: mxs-dma: reset after disable channel dma: intel_mid_dma: remove redundant pci_set_drvdata calls dma: mxs-dma: fix unterminated platform_device_id table dmaengine: pl330: make platform data optional dmaengine: imx-sdma: return proper error if kzalloc fails pch_dma: Fix CTL register access issue dmaengine: mxs-dma: skip request_irq for NO_IRQ dmaengine/coh901318: fix slave submission semantics dmaengine/ste_dma40: allow memory buswidth/burst to be configured ... Fix trivial whitespace conflict in drivers/dma/mv_xor.c
2011-08-01Merge branch 'gpiolib' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'gpiolib' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Hook up gpiolib support
2011-08-01Merge branch 'for-greg' of ↵Greg Kroah-Hartman
master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb into usb-linus * 'for-greg' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb: usb: musb: fix oops on musb_gadget_pullup usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1) usb: gadget: hid: don't STALL when processing a HID Descriptor request usb: musb: fix Kconfig usb: musb: tusb6010_omap: fix build failure: error: 'musb' undeclared usb: gadget: composite: fix bMaxPacketSize for SuperSpeed usb: gadget: fusb300: remove #if 0 block usb: gadget: s3c2410_udc: fix unterminated platform_device_id table
2011-08-01Merge branch 'pstore-efi' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'pstore-efi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: efivars: Introduce PSTORE_EFI_ATTRIBUTES efivars: Use string functions in pstore_write efivars: introduce utf16_strncmp efivars: String functions efi: Add support for using efivars as a pstore backend pstore: Allow the user to explicitly choose a backend pstore: Make "part" unsigned pstore: Add extra context for writes and erases pstore: Extend API for more flexibility in new backends
2011-08-01Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kdb,kgdb: Allow arbitrary kgdb magic knock sequences kdb: Remove all references to DOING_KGDB2 kdb,kgdb: Implement switch and pass buffer from kdb -> gdb kdb: cleanup unused variables missed in the original kdb merge
2011-08-01Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: usb/config: use proper endian access for wMaxPacketSize USB: xhci: fix OS want to own HC xhci: Don't submit commands or URBs to halted hosts.
2011-08-01drm/i915/dp: wait for previous AUX channel activity to clearJesse Barnes
Before initiating a new read or write on the DP AUX channel, wait for any outstanding activity to complete. This may happen during normal retry behavior. If the wait fails (i.e. after 1ms the AUX channel is still busy) dump a backtrace to make the caller easier to spot. v2: use msleep instead, and timeout after 3ms (only ever saw 1 retry with msleep in testing) v3: fix backtrace check to trigger if the 3ms wait times out Fixes https://bugs.freedesktop.org/show_bug.cgi?id=38136. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-01drm/i915: don't use uninitialized EDID bpc values when picking pipe bppJesse Barnes
The EDID parser will zero out the bpc value, and the driver needs to handle that case. In our picker, we'll just ignore 0 values as far as bpp picking goes. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=39323. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-01ext4: prevent memory leaks from ext4_mb_init_backend() on error pathYu Jian
In ext4_mb_init(), if the s_locality_group allocation fails it will currently cause the allocations made in ext4_mb_init_backend() to be leaked. Moving the ext4_mb_init_backend() allocation after the s_locality_group allocation avoids that problem. Signed-off-by: Yu Jian <yujian@whamcloud.com> Signed-off-by: Andreas Dilger <adilger@whamcloud.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-08-01ext4: use EXT4_BAD_INO for buddy cache to avoid colliding with valid inode #Yu Jian
Signed-off-by: Yu Jian <yujian@whamcloud.com> Signed-off-by: Andreas Dilger <adilger@whamcloud.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-08-01ext4: use ext4_msg() instead of printk in mballocTheodore Ts'o
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-08-01HID: add support for new revision of Apple aluminum keyboardDan Bastone
Add USB device ids for the new revision (MB110LL/B) of Apple's wired aluminum keyboard. I have only confirmed that the ANSI version is correct - it is assumed that the ISO and JIS versions follow the standard numbering convention. Signed-off-by: Dan Bastone <dan@pwienterprises.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-01usb: musb: fix oops on musb_gadget_pullupJohn Stultz
an 'unhandled fault' is causes when a gadget driver calls usb_gadget_connect() while the USB cable isn't plugged into the OTG port. the fault is caused by an access to MUSB's memory space while its clock is turned off due to pm_runtime kicking in. in order to fix the fault, we enclose musb_gadget_pullup() with pm_runtime_get_sync() ... pm_runtime_put() calls to be sure we will always reach that path with clock turned on. [ balbi@ti.com : simplified commit log; removed few things which didn't belong there ] Cc: stable@kernel.org Reported-by: Zach Pfeffer <zach.pfeffer@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1)Ming Lei
Obviously, disabling & put regulator and iounmap(hcd->regs) are missed in .remove and failure handling path of .probe, so add them. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Keshava Munegowda <Keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01usb: gadget: hid: don't STALL when processing a HID Descriptor requestSebastian Bauer
This is a patch to fix an issue with the HID gadget which, at the moment, returns STALL on a HID descriptor request. Essentially, the patch changes the hid gadget such that a request for the HID descriptor is handled by copying the descriptor into the response buffer, rather than falling through the default case, in which the request is answered by a STALL. Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01usb: musb: fix KconfigRabin Vincent
After 622859634 (usb: musb: drop a gigantic amount of ifdeferry): - USB_GADGET_MUSB_HDRC is no longer selectable because it depends on the removed USB_MUSB_PERIPHERAL and USB_MUSB_OTG options - The Kconfig comment still says "Enable Host or Gadget support to see Inventra options", even though you now need to enable both of them to see Inventra options. Fix the dependency and drop the anyway unnecessary comment. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01usb: musb: tusb6010_omap: fix build failure: error: 'musb' undeclaredSergei Trofimovich
CC drivers/usb/musb/tusb6010_omap.o drivers/usb/musb/tusb6010_omap.c: In function 'tusb_omap_use_shared_dmareq': drivers/usb/musb/tusb6010_omap.c:92: error: 'musb' undeclared (first use in this function) drivers/usb/musb/tusb6010_omap.c:92: error: (Each undeclared identifier is reported only once drivers/usb/musb/tusb6010_omap.c:92: error: for each function it appears in.) Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01usb: gadget: composite: fix bMaxPacketSize for SuperSpeedSebastian Andrzej Siewior
For bMaxPacketSize0 we usually take what is specified in ep0->maxpacket. This is fine in most cases, however on SuperSpeed bMaxPacketSize0 specifies the exponent instead of the actual size in bytes. The only valid value on SS is 9 which denotes 512 bytes. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01usb: gadget: fusb300: remove #if 0 blockSebastian Andrzej Siewior
The code in this block is unused and the Author is fine with removing: | These functions were used to debug unstable hw fifo while developing | fusb300. It's much more stable now. | So these functions can be removed. Cc: "Wendy Yuan-Hsin Chen" <yhchen@faraday-tech.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01usb: gadget: s3c2410_udc: fix unterminated platform_device_id tableAxel Lin
platform_device_id structures need a NULL terminating entry, add it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01PCI: code and comments cleanupRam Pai
a) adjust_resource_sorted() is now called reassign_resource_sorted() b) nice-to-have is now called optional c) add_list is now called realloc_list. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-01PCI: make cardbus-bridge resources optionalRam Pai
Allocate resources to cardbus bridge only after all other genuine resources requests are satisfied. Dont retry if resource allocation for cardbus-bridges fail. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-01PCI: make SRIOV resources optionalYinghai Lu
From: Yinghai Lu <yinghai@kernel.org> Allocate resources to SRIOV BARs only after all other required resource-requests are satisfied. Dont retry if resource allocation for SRIOV BARs fail. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-01PCI : ability to relocate assigned pci-resourcesRam Pai
Currently pci-bridges are allocated enough resources to satisfy their immediate requirements. Any additional resource-requests fail if additional free space, contiguous to the one already allocated, is not available. This behavior is not reasonable since sufficient contiguous resources, that can satisfy the request, are available at a different location. This patch provides the ability to expand and relocate a allocated resource. v2: Changelog: Fixed size calculation in pci_reassign_resource() v3: Changelog : Split this patch. The resource.c changes are already upstream. All the pci driver changes are in here. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-01PCI: honor child buses add_size in hot plug configurationYinghai Lu
git commit c8adf9a3e873eddaaec11ac410a99ef6b9656938 "PCI: pre-allocate additional resources to devices only after successful allocation of essential resources." fails to take into consideration the optional-resources needed by children devices while calculating the optional-resource needed by the bridge. This can be a problem on some setup. For example, if a hotplug bridge has 8 children hotplug bridges, the bridge should have enough resources to accomodate the hotplug requirements for each of its children hotplug bridges. Currently this is not the case. This patch fixes the problem. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-01PCI: Set PCI-E Max Payload Size on fabricJon Mason
On a given PCI-E fabric, each device, bridge, and root port can have a different PCI-E maximum payload size. There is a sizable performance boost for having the largest possible maximum payload size on each PCI-E device. However, if improperly configured, fatal bus errors can occur. Thus, it is important to ensure that PCI-E payloads sends by a device are never larger than the MPS setting of all devices on the way to the destination. This can be achieved two ways: - A conservative approach is to use the smallest common denominator of the entire tree below a root complex for every device on that fabric. This means for example that having a 128 bytes MPS USB controller on one leg of a switch will dramatically reduce performances of a video card or 10GE adapter on another leg of that same switch. It also means that any hierarchy supporting hotplug slots (including expresscard or thunderbolt I suppose, dbl check that) will have to be entirely clamped to 128 bytes since we cannot predict what will be plugged into those slots, and we cannot change the MPS on a "live" system. - A more optimal way is possible, if it falls within a couple of constraints: * The top-level host bridge will never generate packets larger than the smallest TLP (or if it can be controlled independently from its MPS at least) * The device will never generate packets larger than MPS (which can be configured via MRRS) * No support of direct PCI-E <-> PCI-E transfers between devices without some additional code to specifically deal with that case Then we can use an approach that basically ignores downstream requests and focuses exclusively on upstream requests. In that case, all we need to care about is that a device MPS is no larger than its parent MPS, which allows us to keep all switches/bridges to the max MPS supported by their parent and eventually the PHB. In this case, your USB controller would no longer "starve" your 10GE Ethernet and your hotplug slots won't affect your global MPS. Additionally, the hotplugged devices themselves can be configured to a larger MPS up to the value configured in the hotplug bridge. To choose between the two available options, two PCI kernel boot args have been added to the PCI calls. "pcie_bus_safe" will provide the former behavior, while "pcie_bus_perf" will perform the latter behavior. By default, the latter behavior is used. NOTE: due to the location of the enablement, each arch will need to add calls to this function. This patch only enables x86. This patch includes a number of changes recommended by Benjamin Herrenschmidt. Tested-by: Jordan_Hargrave@dell.com Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-01Btrfs: don't call writepages from within write_full_pageJosef Bacik
When doing a writepage we call writepages to try and write out any other dirty pages in the area. This could cause problems where we commit a transaction and then have somebody else dirtying metadata in the area as we could end up writing out a lot more than we care about, which could cause latency on anybody who is waiting for the transaction to completely finish committing. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: Remove unused variable 'last_index' in file.cMitch Harder
The variable 'last_index' is calculated in the __btrfs_buffered_write function and passed as a parameter to the prepare_pages function, but is not used anywhere in the prepare_pages function. Remove instances of 'last_index' in these functions. Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: clean up for find_first_extent_bit()Xiao Guangrong
find_first_extent_bit() and find_first_extent_bit_state() share most of the code, and we can just make the former call the latter. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: clean up for wait_extent_bit()Xiao Guangrong
We can just use cond_resched_lock(). Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: clean up for insert_state()Xiao Guangrong
Don't duplicate set_state_bits(). Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: remove unused members from struct extent_stateXiao Guangrong
These members are not used at all. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: clean up code for merging extent mapsLi Zefan
unpin_extent_cache() and add_extent_mapping() shares the same code that merges extent maps. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: clean up code for extent_map lookupLi Zefan
lookup_extent_map() and search_extent_map() can share most of code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: clean up search_extent_mapping()Li Zefan
rb_node returned by __tree_search() can be a valid pointer or NULL, but won't be some errno. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: remove redundant code for dir item lookupLi Zefan
When we search a dir item with a specific hash code, we can just return NULL without further checking if btrfs_search_slot() returns 1. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: make acl functions really no-op if acl is not enabledLi Zefan
So there's no overhead for something we don't use. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: remove remaining ref-cache codeLi Zefan
Since commit f2a97a9dbd86eb1ef956bdf20e05c507b32beb96 ("btrfs: remove all unused functions"), there's no extern functions at all in ref-cache.c, so just remove the remaining dead code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: remove a BUG_ON() in btrfs_commit_transaction()Li Zefan
wait_for_commit() always returns 0. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: use wait_event()Li Zefan
Use wait_event() when possible to avoid code duplication. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: check the nodatasum flag when writing compressed filesLi Zefan
If mounting with nodatasum option, we won't csum file data for general write or direct-io write, and this rule should also be applied when writing compressed files. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: copy string correctly in INO_LOOKUP ioctlLi Zefan
Memory areas [ptr, ptr+total_len] and [name, name+total_len] may overlap, so it's wrong to use memcpy(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: don't print the leaf if we had an errorJosef Bacik
In __btrfs_free_extent we will print the leaf if we fail to find the extent we wanted, but the problem is if we get an error we won't have a leaf so often this leads to a NULL pointer dereference and we lose the error that actually occurred. So only print the leaf if ret > 0, which means we didn't find the item we were looking for but we didn't error either. This way the error is preserved. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01btrfs: make btrfs_set_root_node voidMark Fasheh
This is fairly trivial - btrfs_set_root_node() - always returns zero so we can just make it void. All callers ignore the return code now anyway. I also made sure to check that none of the functions that btrfs_set_root_node() calls returns an error that we might have needed to catch and pass back. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: fix oops while writing data to SSD partitionsliubo
Here I have a two SSD-partitions btrfs, and they are defaultly set to "data=raid0, metadata=raid1", then I try to fill my btrfs partition till "No space left on device", via "dd if=/dev/zero of=/mnt/btrfs/tmp". I get an oops panic from kernel BUG at fs/btrfs/extent-tree.c:5199!, which refers to find_free_extent's BUG_ON(index != get_block_group_index(block_group)); In SSD mode, in order to find enough space to alloc, we may check the block_group cache which has been checked sometime before, but the index is not updated, where it hits the BUG_ON. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Acked-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: Protect the readonly flag of block groupWuBo
The access for ro in btrfs_block_group_cache should be protected because of the racy lock in relocation. Signed-off-by: Wu Bo <wu.bo@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01btrfs: Make extent-io callbacks that never fail return voidJeff Mahoney
The set/clear bit and the extent split/merge hooks only ever return 0. Changing them to return void simplifies the error handling cases later. This patch changes the hook prototypes, the single implementation of each, and the functions that call them to return void instead. Since all four of these hooks execute under a spinlock, they're necessarily simple. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: fix readahead in file defragLi Zefan
We passed the wrong value to btrfs_force_ra(). Fix this by changing the argument of btrfs_force_ra() from last_index to nr_page. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-01Btrfs: return error to caller when btrfs_unlink() failesTsutomu Itoh
When btrfs_unlink_inode() and btrfs_orphan_add() in btrfs_unlink() are error, the error code is returned to the caller instead of BUG_ON(). Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-16 10:14:36 +0000