summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-25i2c: robotfuzz-osif: disable zero-length read messagesWolfram Sang
This driver passes the length of an i2c_msg directly to usb_control_msg(). If the message is now a read and of length 0, it violates the USB protocol and a warning will be printed. Enable the I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length read messages altogether. Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250522064234.3721-2-wsa+renesas@sang-engineering.com
2025-06-25i2c: imx: fix emulated smbus block readLukasz Kucharczyk
Acknowledge the byte count submitted by the target. When I2C_SMBUS_BLOCK_DATA read operation is executed by i2c_smbus_xfer_emulated(), the length of the second (read) message is set to 1. Length of the block is supposed to be obtained from the target by the underlying bus driver. The i2c_imx_isr_read() function should emit the acknowledge on i2c bus after reading the first byte (i.e., byte count) while processing such message (as defined in Section 6.5.7 of System Management Bus Specification [1]). Without this acknowledge, the target does not submit subsequent bytes and the controller only reads 0xff's. In addition, store the length of block data obtained from the target in the buffer provided by i2c_smbus_xfer_emulated() - otherwise the first byte of actual data is erroneously interpreted as length of the data block. [1] https://smbus.org/specs/SMBus_3_3_20240512.pdf Fixes: 5f5c2d4579ca ("i2c: imx: prevent rescheduling in non dma mode") Signed-off-by: Lukasz Kucharczyk <lukasz.kucharczyk@leica-geosystems.com> Cc: <stable@vger.kernel.org> # v6.13+ Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Stefan Eichenberger <eichest@gmail.com> Reviewed-by: Carlos Song <carlos.song@nxp.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250520122252.1475403-1-lukasz.kucharczyk@leica-geosystems.com
2025-06-25libbpf: Fix possible use-after-free for externsAdin Scannell
The `name` field in `obj->externs` points into the BTF data at initial open time. However, some functions may invalidate this after opening and before loading (e.g. `bpf_map__set_value_size`), which results in pointers into freed memory and undefined behavior. The simplest solution is to simply `strdup` these strings, similar to the `essent_name`, and free them at the same time. In order to test this path, the `global_map_resize` BPF selftest is modified slightly to ensure the presence of an extern, which causes this test to fail prior to the fix. Given there isn't an obvious API or error to test against, I opted to add this to the existing test as an aspect of the resizing feature rather than duplicate the test. Fixes: 9d0a23313b1a ("libbpf: Add capability for resizing datasec maps") Signed-off-by: Adin Scannell <amscanne@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250625050215.2777374-1-amscanne@meta.com
2025-06-25cxl/edac: Fix using wrong repair type to check dram event recordLi Ming
cxl_find_rec_dram() is used to find a DRAM event record based on the inputted attributes. Different repair_type of the inputted attributes will check the DRAM event record in different ways. When EDAC driver is performing a memory rank sparing, it should use CXL_RANK_SPARING rather than CXL_BANK_SPARING as repair_type for DRAM event record checking. Fixes: 588ca944c277 ("cxl/edac: Add CXL memory device memory sparing control feature") Signed-off-by: Li Ming <ming.li@zohomail.com> Reviewed-by: Shiju Jose <shiju.jose@huawei.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Link: https://patch.msgid.link/20250620052924.138892-1-ming.li@zohomail.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2025-06-25Merge tag 'spi-fix-v6.16-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "One fix for a runtime PM underflow when removing the Cadence QuadSPI driver" * tag 'spi-fix-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-cadence-quadspi: Fix pm runtime unbalance
2025-06-25smb: client: remove \t from TP_printk statementsStefan Metzmacher
The generate '[FAILED TO PARSE]' strings in trace-cmd report output like this: rm-5298 [001] 6084.533748493: smb3_exit_err: [FAILED TO PARSE] xid=972 func_name=cifs_rmdir rc=-39 rm-5298 [001] 6084.533959234: smb3_enter: [FAILED TO PARSE] xid=973 func_name=cifs_closedir rm-5298 [001] 6084.533967630: smb3_close_enter: [FAILED TO PARSE] xid=973 fid=94489281833 tid=1 sesid=96758029877361 rm-5298 [001] 6084.534004008: smb3_cmd_enter: [FAILED TO PARSE] tid=1 sesid=96758029877361 cmd=6 mid=566 rm-5298 [001] 6084.552248232: smb3_cmd_done: [FAILED TO PARSE] tid=1 sesid=96758029877361 cmd=6 mid=566 rm-5298 [001] 6084.552280542: smb3_close_done: [FAILED TO PARSE] xid=973 fid=94489281833 tid=1 sesid=96758029877361 rm-5298 [001] 6084.552316034: smb3_exit_done: [FAILED TO PARSE] xid=973 func_name=cifs_closedir Cc: stable@vger.kernel.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-06-25Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Fixes all in drivers. ufs and megaraid_sas are small and obvious. The large diffstat in fnic comes from two pieces: the addition of quite a bit of logging (no change to function) and the reworking of the timeout allocation path for the two conditions that can occur simultaneously to prevent reusing the same abort frame and then both trying to free it" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fnic: Fix missing DMA mapping error in fnic_send_frame() scsi: fnic: Set appropriate logging level for log message scsi: fnic: Add and improve logs in FDMI and FDMI ABTS paths scsi: fnic: Turn off FDMI ACTIVE flags on link down scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out scsi: ufs: core: Fix clk scaling to be conditional in reset and restore scsi: megaraid_sas: Fix invalid node index
2025-06-25Merge tag 'uml-for-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML fixes from Johannes Berg: - fix FP registers in seccomp mode - prevent duplicate devices in VFIO support - don't ignore errors in UBD thread start - reduce stack use with clang 19 * tag 'uml-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: vector: Reduce stack usage in vector_eth_configure() um: Use correct data source in fpregs_legacy_set() um: vfio: Prevent duplicate device assignments um: ubd: Add missing error check in start_io_thread()
2025-06-25Merge tag 'wireless-2025-06-25' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Just a few fixes: - iwlegacy: work around large stack with clang/kasan - mac80211: fix integer overflow - mac80211: fix link struct init vs. RCU publish - iwlwifi: fix warning on IFF_UP * tag 'wireless-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: finish link init before RCU publish wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version wifi: mac80211: fix beacon interval calculation overflow wifi: iwlegacy: work around excessive stack usage on clang/kasan ==================== Link: https://patch.msgid.link/20250625115433.41381-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-25io_uring/net: mark iov as dynamically allocated even for single segmentsJens Axboe
A bigger array of vecs could've been allocated, but io_ring_buffers_peek() still decided to cap the mapped range depending on how much data was available. Hence don't rely on the segment count to know if the request should be marked as needing cleanup, always check upfront if the iov array is different than the fast_iov array. Fixes: 26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-25smb: client: let smbd_post_send_iter() respect the peers max_send_size and ↵Stefan Metzmacher
transmit all data We should not send smbdirect_data_transfer messages larger than the negotiated max_send_size, typically 1364 bytes, which means 24 bytes of the smbdirect_data_transfer header + 1340 payload bytes. This happened when doing an SMB2 write with more than 1340 bytes (which is done inline as it's below rdma_readwrite_threshold). It means the peer resets the connection. When testing between cifs.ko and ksmbd.ko something like this is logged: client: CIFS: VFS: RDMA transport re-established siw: got TERMINATE. layer 1, type 2, code 2 siw: got TERMINATE. layer 1, type 2, code 2 siw: got TERMINATE. layer 1, type 2, code 2 siw: got TERMINATE. layer 1, type 2, code 2 siw: got TERMINATE. layer 1, type 2, code 2 siw: got TERMINATE. layer 1, type 2, code 2 siw: got TERMINATE. layer 1, type 2, code 2 siw: got TERMINATE. layer 1, type 2, code 2 siw: got TERMINATE. layer 1, type 2, code 2 CIFS: VFS: \\carina Send error in SessSetup = -11 smb2_reconnect: 12 callbacks suppressed CIFS: VFS: reconnect tcon failed rc = -11 CIFS: VFS: reconnect tcon failed rc = -11 CIFS: VFS: reconnect tcon failed rc = -11 CIFS: VFS: SMB: Zero rsize calculated, using minimum value 65536 and: CIFS: VFS: RDMA transport re-established siw: got TERMINATE. layer 1, type 2, code 2 CIFS: VFS: smbd_recv:1894 disconnected siw: got TERMINATE. layer 1, type 2, code 2 The ksmbd dmesg is showing things like: smb_direct: Recv error. status='local length error (1)' opcode=128 smb_direct: disconnected smb_direct: Recv error. status='local length error (1)' opcode=128 ksmbd: smb_direct: disconnected ksmbd: sock_read failed: -107 As smbd_post_send_iter() limits the transmitted number of bytes we need loop over it in order to transmit the whole iter. Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Meetakshi Setiya <msetiya@microsoft.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: <stable+noautosel@kernel.org> # sp->max_send_size should be info->max_send_size in backports Fixes: 3d78fe73fa12 ("cifs: Build the RDMA SGE list directly from an iterator") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-06-25drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector typeJayesh Choudhary
By default, HPD was disabled on SN65DSI86 bridge. When the driver was added (commit "a095f15c00e27"), the HPD_DISABLE bit was set in pre-enable call which was moved to other function calls subsequently. Later on, commit "c312b0df3b13" added detect utility for DP mode. But with HPD_DISABLE bit set, all the HPD events are disabled[0] and the debounced state always return 1 (always connected state). Set HPD_DISABLE bit conditionally based on display sink's connector type. Since the HPD_STATE is reflected correctly only after waiting for debounce time (~100-400ms) and adding this delay in detect() is not feasible owing to the performace impact (glitches and frame drop), remove runtime calls in detect() and add hpd_enable()/disable() bridge hooks with runtime calls, to detect hpd properly without any delay. [0]: <https://www.ti.com/lit/gpn/SN65DSI86> (Pg. 32) Fixes: c312b0df3b13 ("drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP") Cc: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250624044835.165708-1-j-choudhary@ti.com
2025-06-25EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMsAvadhut Naik
Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD Zen-based SOCs has an Address Mask and a Secondary Address Mask register associated with it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity during init using these two registers. Currently, the module primarily considers only the Address Mask register for computing DIMM sizes. The Secondary Address Mask register is only considered for odd CS. Additionally, if it has been considered, the Address Mask register is ignored altogether for that CS. For power-of-two DIMMs i.e. DIMMs whose total capacity is a power of two (32GB, 64GB, etc), this is not an issue since only the Address Mask register is used. For non-power-of-two DIMMs i.e., DIMMs whose total capacity is not a power of two (48GB, 96GB, etc), however, the Secondary Address Mask register is used in conjunction with the Address Mask register. However, since the module only considers either of the two registers for a CS, the size computed by the module is incorrect. The Secondary Address Mask register is not considered for even CS, and the Address Mask register is not considered for odd CS. Introduce a new helper function so that both Address Mask and Secondary Address Mask registers are considered, when valid, for computing DIMM sizes. Furthermore, also rename some variables for greater clarity. Fixes: 81f5090db843 ("EDAC/amd64: Support asymmetric dual-rank DIMMs") Closes: https://lore.kernel.org/dbec22b6-00f2-498b-b70d-ab6f8a5ec87e@natrix.lt Reported-by: Žilvinas Žaltiena <zilvinas@natrix.lt> Signed-off-by: Avadhut Naik <avadhut.naik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com> Tested-by: Žilvinas Žaltiena <zilvinas@natrix.lt> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250529205013.403450-1-avadhut.naik@amd.com
2025-06-25io_uring: fix resource leak in io_import_dmabuf()Penglei Jiang
Replace the return statement with setting ret = -EINVAL and jumping to the err label to ensure resources are released via io_release_dmabuf. Fixes: a5c98e942457 ("io_uring/zcrx: dmabuf backed zerocopy receive") Signed-off-by: Penglei Jiang <superman.xpt@gmail.com> Link: https://lore.kernel.org/r/20250625102703.68336-1-superman.xpt@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-25ata: ahci: Use correct DMI identifier for ASUSPRO-D840SA LPM quirkNiklas Cassel
ASUS store the board name in DMI_PRODUCT_NAME rather than DMI_PRODUCT_VERSION. (Apparently it is only Lenovo that stores the model-name in DMI_PRODUCT_VERSION.) Use the correct DMI identifier, DMI_PRODUCT_NAME, to match the ASUSPRO-D840SA board, such that the quirk actually gets applied. Cc: stable@vger.kernel.org Reported-by: Andy Yang <andyybtc79@gmail.com> Tested-by: Andy Yang <andyybtc79@gmail.com> Closes: https://lore.kernel.org/linux-ide/aFb3wXAwJSSJUB7o@ryzen/ Fixes: b5acc3628898 ("ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard") Reviewed-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250624074029.963028-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-06-25mtk-sd: reset host->mrq on prepare_data() errorSergey Senozhatsky
Do not leave host with dangling ->mrq pointer if we hit the msdc_prepare_data() error out path. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: f5de469990f1 ("mtk-sd: Prevent memory corruption from DMA map failure") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250625052106.584905-1-senozhatsky@chromium.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-06-25Merge tag 'iwlwifi-fixes-2025-06-25' of ↵Johannes Berg
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Miri Korenblit says: ==================== iwlwifi-fixes: fix failure in interface up ==================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-25RDMA/mlx5: Fix vport loopback for MPV devicePatrisious Haddad
Always enable vport loopback for both MPV devices on driver start. Previously in some cases related to MPV RoCE, packets weren't correctly executing loopback check at vport in FW, since it was disabled. Due to complexity of identifying such cases for MPV always enable vport loopback for both GVMIs when binding the slave to the master port. Fixes: 0042f9e458a5 ("RDMA/mlx5: Enable vport loopback when user context or QP mandate") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/d4298f5ebb2197459e9e7221c51ecd6a34699847.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-06-25RDMA/mlx5: Fix CC counters query for MPVPatrisious Haddad
In case, CC counters are querying for the second port use the correct core device for the query instead of always using the master core device. Fixes: aac4492ef23a ("IB/mlx5: Update counter implementation for dual port RoCE") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/9cace74dcf106116118bebfa9146d40d4166c6b0.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-06-25RDMA/mlx5: Fix HW counters query for non-representor devicesPatrisious Haddad
To get the device HW counters, a non-representor switchdev device should use the mlx5_ib_query_q_counters() function and query all of the available counters. While a representor device in switchdev mode should use the mlx5_ib_query_q_counters_vport() function and query only the Q_Counters without the PPCNT counters and congestion control counters, since they aren't relevant for a representor device. Currently a non-representor switchdev device skips querying the PPCNT counters and congestion control counters, leaving them unupdated. Fix that by properly querying those counters for non-representor devices. Fixes: d22467a71ebe ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com> Link: https://patch.msgid.link/56bf8af4ca8c58e3fb9f7e47b1dca2009eeeed81.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-06-25IB/core: Annotate umem_mutex acquisition under fs_reclaim for lockdepOr Har-Toov
Following the fix in the previous commit ("IB/mlx5: Fix potential deadlock in MR deregistration"), teach lockdep explicitly about the locking order between fs_reclaim and umem_mutex. The previous commit resolved a potential deadlock scenario where kzalloc(GFP_KERNEL) was called while holding umem_mutex, which could lead to reclaim and eventually invoke the MMU notifier (mlx5_ib_invalidate_range()), causing a recursive acquisition of umem_mutex. To prevent such issues from reoccurring unnoticed in future code changes, add a lockdep annotation in ib_init_umem_odp() that simulates taking umem_mutex inside a reclaim context. This makes lockdep aware of this locking dependency and ensures that future violations—such as calling kzalloc() or any memory allocator that may enter reclaim while holding umem_mutex—will immediately raise a lockdep warning. Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/9d31b9d8fe1db648a9f47cec3df6b8463319dee5.1750061698.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-06-25IB/mlx5: Fix potential deadlock in MR deregistrationOr Har-Toov
The issue arises when kzalloc() is invoked while holding umem_mutex or any other lock acquired under umem_mutex. This is problematic because kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke mmu_notifier_invalidate_range_start(). This function can lead to mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again, resulting in a deadlock. The problematic flow: CPU0 | CPU1 ---------------------------------------|------------------------------------------------ mlx5_ib_dereg_mr() | → revoke_mr() | → mutex_lock(&umem_odp->umem_mutex) | | mlx5_mkey_cache_init() | → mutex_lock(&dev->cache.rb_lock) | → mlx5r_cache_create_ent_locked() | → kzalloc(GFP_KERNEL) | → fs_reclaim() | → mmu_notifier_invalidate_range_start() | → mlx5_ib_invalidate_range() | → mutex_lock(&umem_odp->umem_mutex) → cache_ent_find_and_store() | → mutex_lock(&dev->cache.rb_lock) | Additionally, when kzalloc() is called from within cache_ent_find_and_store(), we encounter the same deadlock due to re-acquisition of umem_mutex. Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr() and before acquiring rb_lock. This ensures that we don't hold umem_mutex while performing memory allocations that could trigger the reclaim path. This change prevents the deadlock by ensuring proper lock ordering and avoiding holding locks during memory allocation operations that could trigger the reclaim path. The following lockdep warning demonstrates the deadlock: python3/20557 is trying to acquire lock: ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at: mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] but task is already holding lock: ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: unmap_vmas+0x7b/0x1a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x60/0xd0 mem_cgroup_css_alloc+0x6f/0x9b0 cgroup_init_subsys+0xa4/0x240 cgroup_init+0x1c8/0x510 start_kernel+0x747/0x760 x86_64_start_reservations+0x25/0x30 x86_64_start_kernel+0x73/0x80 common_startup_64+0x129/0x138 -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x91/0xd0 __kmalloc_cache_noprof+0x4d/0x4c0 mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib] mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib] mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib] __mlx5_ib_add+0x4b/0x190 [mlx5_ib] mlx5r_probe+0xd9/0x320 [mlx5_ib] auxiliary_bus_probe+0x42/0x70 really_probe+0xdb/0x360 __driver_probe_device+0x8f/0x130 driver_probe_device+0x1f/0xb0 __driver_attach+0xd4/0x1f0 bus_for_each_dev+0x79/0xd0 bus_add_driver+0xf0/0x200 driver_register+0x6e/0xc0 __auxiliary_driver_register+0x6a/0xc0 do_one_initcall+0x5e/0x390 do_init_module+0x88/0x240 init_module_from_file+0x85/0xc0 idempotent_init_module+0x104/0x300 __x64_sys_finit_module+0x68/0xc0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (&dev->cache.rb_lock){+.+.}-{4:4}: __mutex_lock+0x98/0xf10 __mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib] mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib] ib_dereg_mr_user+0x85/0x1f0 [ib_core] uverbs_free_mr+0x19/0x30 [ib_uverbs] destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs] uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs] uobj_destroy+0x57/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs] ib_uverbs_ioctl+0x129/0x230 [ib_uverbs] __x64_sys_ioctl+0x596/0xaa0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}: __lock_acquire+0x1826/0x2f00 lock_acquire+0xd3/0x2e0 __mutex_lock+0x98/0xf10 mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x18e/0x1f0 unmap_vmas+0x182/0x1a0 exit_mmap+0xf3/0x4a0 mmput+0x3a/0x100 do_exit+0x2b9/0xa90 do_group_exit+0x32/0xa0 get_signal+0xc32/0xcb0 arch_do_signal_or_restart+0x29/0x1d0 syscall_exit_to_user_mode+0x105/0x1d0 do_syscall_64+0x79/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Chain exists of: &dev->cache.rb_lock --> mmu_notifier_invalidate_range_start --> &umem_odp->umem_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&umem_odp->umem_mutex); lock(mmu_notifier_invalidate_range_start); lock(&umem_odp->umem_mutex); lock(&dev->cache.rb_lock); *** DEADLOCK *** Fixes: abb604a1a9c8 ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error") Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-06-25um: vector: Reduce stack usage in vector_eth_configure()Tiwei Bie
When compiling with clang (19.1.7), initializing *vp using a compound literal may result in excessive stack usage. Fix it by initializing the required fields of *vp individually. Without this patch: $ objdump -d arch/um/drivers/vector_kern.o | ./scripts/checkstack.pl x86_64 0 ... 0x0000000000000540 vector_eth_configure [vector_kern.o]:1472 ... With this patch: $ objdump -d arch/um/drivers/vector_kern.o | ./scripts/checkstack.pl x86_64 0 ... 0x0000000000000540 vector_eth_configure [vector_kern.o]:208 ... Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506221017.WtB7Usua-lkp@intel.com/ Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com> Link: https://patch.msgid.link/20250623110829.314864-1-tiwei.btw@antgroup.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-25um: Use correct data source in fpregs_legacy_set()Tiwei Bie
Read from the buffer pointed to by 'from' instead of '&buf', as 'buf' contains no valid data when 'ubuf' is NULL. Fixes: b1e1bd2e6943 ("um: Add helper functions to get/set state for SECCOMP") Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com> Link: https://patch.msgid.link/20250606124428.148164-5-tiwei.btw@antgroup.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-25um: vfio: Prevent duplicate device assignmentsTiwei Bie
Ensure devices are assigned only once. Reject subsequent requests for duplicate assignments. Fixes: a0e2cb6a9063 ("um: Add VFIO-based virtual PCI driver") Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com> Link: https://patch.msgid.link/20250606124428.148164-4-tiwei.btw@antgroup.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-25um: ubd: Add missing error check in start_io_thread()Tiwei Bie
The subsequent call to os_set_fd_block() overwrites the previous return value. OR the two return values together to fix it. Fixes: f88f0bdfc32f ("um: UBD Improvements") Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com> Link: https://patch.msgid.link/20250606124428.148164-2-tiwei.btw@antgroup.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-25drm/i915: fix build error some moreArnd Bergmann
An earlier patch fixed a build failure with clang, but I still see the same problem with some configurations using gcc: drivers/gpu/drm/i915/i915_pmu.c: In function 'config_mask': include/linux/compiler_types.h:568:38: error: call to '__compiletime_assert_462' declared with attribute error: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1 drivers/gpu/drm/i915/i915_pmu.c:116:3: note: in expansion of macro 'BUILD_BUG_ON' 116 | BUILD_BUG_ON(bit > As I understand it, the problem is that the function is not always fully inlined, but the __builtin_constant_p() can still evaluate the argument as being constant. Marking it as __always_inline so far works for me in all configurations. Fixes: a7137b1825b5 ("drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled") Fixes: a644fde77ff7 ("drm/i915/pmu: Change bitmask of enabled events to u32") Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250620111824.3395007-1-arnd@kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit ef69f9dd1cd7301cdf04ba326ed28152a3affcf6) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2025-06-25ALSA: usb: qcom: fix NULL pointer dereference in qmi_stop_sessionPei Xiao
The find_substream() call may return NULL, but the error path dereferenced 'subs' unconditionally via dev_err(&subs->dev->dev, ...), causing a NULL pointer dereference when subs is NULL. Fix by switching to &uadev[idx].udev->dev which is always valid in this context. Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn> Link: https://patch.msgid.link/86ac2939273ac853535049e60391c09d7688714e.1750755508.git.xiaopei01@kylinos.cn Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-24io_uring: don't assume uaddr alignment in io_vec_fill_bvecPavel Begunkov
There is no guaranteed alignment for user pointers. Don't use mask trickery and adjust the offset by bv_offset. Cc: stable@vger.kernel.org Reported-by: David Hildenbrand <david@redhat.com> Fixes: 9ef4cbbcb4ac3 ("io_uring: add infra for importing vectored reg buffers") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/io-uring/19530391f5c361a026ac9b401ff8e123bde55d98.1750771718.git.asml.silence@gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24io_uring/rsrc: don't rely on user vaddr alignmentPavel Begunkov
There is no guaranteed alignment for user pointers, however the calculation of an offset of the first page into a folio after coalescing uses some weird bit mask logic, get rid of it. Cc: stable@vger.kernel.org Reported-by: David Hildenbrand <david@redhat.com> Fixes: a8edbb424b139 ("io_uring/rsrc: enable multi-hugepage buffer coalescing") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/io-uring/e387b4c78b33f231105a601d84eefd8301f57954.1750771718.git.asml.silence@gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24io_uring/rsrc: fix folio unpinningPavel Begunkov
syzbot complains about an unmapping failure: [ 108.070381][ T14] kernel BUG at mm/gup.c:71! [ 108.070502][ T14] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 108.123672][ T14] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250221-8.fc42 02/21/2025 [ 108.127458][ T14] Workqueue: iou_exit io_ring_exit_work [ 108.174205][ T14] Call trace: [ 108.175649][ T14] sanity_check_pinned_pages+0x7cc/0x7d0 (P) [ 108.178138][ T14] unpin_user_page+0x80/0x10c [ 108.180189][ T14] io_release_ubuf+0x84/0xf8 [ 108.182196][ T14] io_free_rsrc_node+0x250/0x57c [ 108.184345][ T14] io_rsrc_data_free+0x148/0x298 [ 108.186493][ T14] io_sqe_buffers_unregister+0x84/0xa0 [ 108.188991][ T14] io_ring_ctx_free+0x48/0x480 [ 108.191057][ T14] io_ring_exit_work+0x764/0x7d8 [ 108.193207][ T14] process_one_work+0x7e8/0x155c [ 108.195431][ T14] worker_thread+0x958/0xed8 [ 108.197561][ T14] kthread+0x5fc/0x75c [ 108.199362][ T14] ret_from_fork+0x10/0x20 We can pin a tail page of a folio, but then io_uring will try to unpin the head page of the folio. While it should be fine in terms of keeping the page actually alive, mm folks say it's wrong and triggers a debug warning. Use unpin_user_folio() instead of unpin_user_page*. Cc: stable@vger.kernel.org Debugged-by: David Hildenbrand <david@redhat.com> Reported-by: syzbot+1d335893772467199ab6@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/683f1551.050a0220.55ceb.0017.GAE@google.com Fixes: a8edbb424b139 ("io_uring/rsrc: enable multi-hugepage buffer coalescing") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/io-uring/a28b0f87339ac2acf14a645dad1e95bbcbf18acd.1750771718.git.asml.silence@gmail.com/ [axboe: adapt to current tree, massage commit message] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24ublk: setup ublk_io correctly in case of ublk_get_data() failureMing Lei
If ublk_get_data() fails, -EIOCBQUEUED is returned and the current command becomes ASYNC. And the only reason is that mapping data can't move on, because of no enough pages or pending signal, then the current ublk request has to be requeued. Once the request need to be requeued, we have to setup `ublk_io` correctly, including io->cmd and flags, otherwise the request may not be forwarded to ublk server successfully. Fixes: 9810362a57cb ("ublk: don't call ublk_dispatch_req() for NEED_GET_DATA") Reported-by: Changhui Zhong <czhong@redhat.com> Closes: https://lore.kernel.org/linux-block/CAGVVp+VN9QcpHUz_0nasFf5q9i1gi8H8j-G-6mkBoqa3TyjRHA@mail.gmail.com/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Changhui Zhong <czhong@redhat.com> Link: https://lore.kernel.org/r/20250624104121.859519-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI headerCaleb Sander Mateos
UBLK_F_SUPPORT_ZERO_COPY has a very old comment describing the initial idea for how zero-copy would be implemented. The actual implementation added in commit 1f6540e2aabb ("ublk: zc register/unregister bvec") uses io_uring registered buffers rather than shared memory mapping. Remove the inaccurate remarks about mapping ublk request memory into the ublk server's address space and requiring 4K block size. Replace them with a description of the current zero-copy mechanism. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250621171015.354932-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24ublk: fix narrowing warnings in UAPI headerCaleb Sander Mateos
When a C++ file compiled with -Wc++11-narrowing includes the UAPI header linux/ublk_cmd.h, ublk_sqe_addr_to_auto_buf_reg()'s assignments of u64 values to u8, u16, and u32 fields result in compiler warnings. Add explicit casts to the intended types to avoid these warnings. Drop the unnecessary bitmasks. Reported-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Fixes: 99c1e4eb6a3f ("ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250621162842.337452-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24selftests: ublk: don't take same backing file for more than one ublk devicesMing Lei
Don't use same backing file for more than one ublk devices, and avoid concurrent write on same file from more ublk disks. Fixes: 8ccebc19ee3d ("selftests: ublk: support UBLK_F_AUTO_BUF_REG") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250623011934.741788-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24ublk: build batch from IOs in same io_ring_ctx and io taskMing Lei
ublk_queue_cmd_list() dispatches the whole batch list by scheduling task work via the tail request's io_uring_cmd, this way is fine even though more than one io_ring_ctx are involved for this batch since it is just one running context. However, the task work handler ublk_cmd_list_tw_cb() takes `issue_flags` of tail uring_cmd's io_ring_ctx for completing all commands. This way is wrong if any uring_cmd is issued from different io_ring_ctx. Fixes it by always building batch IOs from same io_ring_ctx and io task because ublk_dispatch_req() does validate task context, and IO needs to be aborted in case of running from fallback task work context. For typical per-queue or per-io daemon implementation, this way shouldn't make difference from performance viewpoint, because single io_ring_ctx is taken in each daemon for normal use case. Fixes: d796cea7b9f3 ("ublk: implement ->queue_rqs()") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250625022554.883571-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-24bnxt: properly flush XDP redirect listsYan Zhai
We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456] cpu_startup_entry+0x29/0x30 [56252.173248] start_secondary+0xf7/0x100 [56252.179941] common_startup_64+0x13e/0x141 [56252.186886] </TASK> From the crash dump, we found that the cpu_map_flush_list inside redirect info is partially corrupted: its list_head->next points to itself, but list_head->prev points to a valid list of unflushed bq entries. This turned out to be a result of missed XDP flush on redirect lists. By digging in the actual source code, we found that commit 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX ring structures") incorrectly overwrites the event mask for XDP_REDIRECT in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX and XDP_REDIRECT randomly for incoming packets in a naive XDP program. Properly propagate the XDP_REDIRECT events back fixes the crash. Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-24Merge tag 'selinux-pr-20250624' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "Another small SELinux patch to fix a problem seen by the dracut-ng folks during early boot when SELinux is enabled, but the policy has yet to be loaded" * tag 'selinux-pr-20250624' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: change security_compute_sid to return the ssid or tsid on match
2025-06-24vsock/uapi: fix linux/vm_sockets.h userspace compilation errorsStefano Garzarella
If a userspace application just include <linux/vm_sockets.h> will fail to build with the following errors: /usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’ 182 | unsigned char svm_zero[sizeof(struct sockaddr) - | ^~~~~~ /usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function) 183 | sizeof(sa_family_t) - | Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__) where `struct sockaddr` and `sa_family_t` are defined. We already do something similar in <linux/mptcp.h> and <linux/if.h>. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-24bcachefs: fix bch2_journal_keys_peek_prev_min() underflowKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-06-24bcachefs: Use wait_on_allocator() when allocating journalKent Overstreet
wait_on_allocator() emits debug info when we hang trying to allocate. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-06-24x86/traps: Initialize DR7 by writing its architectural reset valueXin Li (Intel)
Initialize DR7 by writing its architectural reset value to always set bit 10, which is reserved to '1', when "clearing" DR7 so as not to trigger unanticipated behavior if said bit is ever unreserved, e.g. as a feature enabling flag with inverted polarity. Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com> Reviewed-by: Sohil Mehta <sohil.mehta@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Sean Christopherson <seanjc@google.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250620231504.2676902-3-xin%40zytor.com
2025-06-24x86/traps: Initialize DR6 by writing its architectural reset valueXin Li (Intel)
Initialize DR6 by writing its architectural reset value to avoid incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads to a false bus lock detected warning. The Intel SDM says: 1) Certain debug exceptions may clear bits 0-3 of DR6. 2) BLD induced #DB clears DR6.BLD and any other debug exception doesn't modify DR6.BLD. 3) RTM induced #DB clears DR6.RTM and any other debug exception sets DR6.RTM. To avoid confusion in identifying debug exceptions, debug handlers should set DR6.BLD and DR6.RTM, and clear other DR6 bits before returning. The DR6 architectural reset value 0xFFFF0FF0, already defined as macro DR6_RESERVED, satisfies these requirements, so just use it to reinitialize DR6 whenever needed. Since clear_all_debug_regs() no longer zeros all debug registers, rename it to initialize_debug_regs() to better reflect its current behavior. Since debug_read_clear_dr6() no longer clears DR6, rename it to debug_read_reset_dr6() to better reflect its current behavior. Fixes: ebb1064e7c2e9 ("x86/traps: Handle #DB for bus lock") Reported-by: Sohil Mehta <sohil.mehta@intel.com> Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com> Reviewed-by: Sohil Mehta <sohil.mehta@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/ Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com
2025-06-24bcachefs: Check for bad write buffer key when moving from journalKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-06-24bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blockedAlan Huang
Reported-by: syzbot+d540192e763531d307ff@syzkaller.appspotmail.com Signed-off-by: Alan Huang <mmpgouride@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-06-24iommufd/selftest: Fix build warnings due to uninitialized mfdNicolin Chen
Commit 869c788909b9 ("selftests: harness: Stop using setjmp()/longjmp()") changed the harness structure. For some unknown reason, two build warnings occur to the iommufd selftest: iommufd.c: In function ‘wrapper_iommufd_mock_domain_all_aligns’: iommufd.c:1807:17: warning: ‘mfd’ may be used uninitialized in this function 1807 | close(mfd); | ^~~~~~~~~~ iommufd.c:1767:13: note: ‘mfd’ was declared here 1767 | int mfd; | ^~~ iommufd.c: In function ‘wrapper_iommufd_mock_domain_all_aligns_copy’: iommufd.c:1870:17: warning: ‘mfd’ may be used uninitialized in this function 1870 | close(mfd); | ^~~~~~~~~~ iommufd.c:1819:13: note: ‘mfd’ was declared here 1819 | int mfd; | ^~~ All the mfd have been used in the variant->file path only, so it's likely a false alarm. FWIW, the commit mentioned above does not cause this, yet it might affect gcc in a certain way that resulted in the warnings. It is also found that ading a dummy setjmp (which doesn't make sense) could mute the warnings: https://lore.kernel.org/all/aEi8DV+ReF3v3Rlf@nvidia.com/ The job of this selftest is to catch kernel bug, while such warnings will unlikely disrupt its role. Mute the warning by force initializing the mfd and add an ASSERT_GT(). Link: https://patch.msgid.link/r/6951d85d5cd34cbf22abab7714542654e63ecc44.1750787928.git.nicolinc@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24iommufd/selftest: Add asserts testing global mfdNicolin Chen
The mfd and mfd_buffer will be used in the tests directly without an extra check. Test them in setup_sizes() to ensure they are safe to use. Fixes: 0bcceb1f51c7 ("iommufd: Selftest coverage for IOMMU_IOAS_MAP_FILE") Link: https://patch.msgid.link/r/94bdc11d2b6d5db337b1361c5e5fce0ed494bb40.1750787928.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24iommufd/selftest: Add missing close(mfd) in memfd_mmap()Nicolin Chen
Do not forget to close mfd in the error paths, since none of the callers would close it when ASSERT_NE(MAP_FAILED, buf) fails. Fixes: 0bcceb1f51c7 ("iommufd: Selftest coverage for IOMMU_IOAS_MAP_FILE") Link: https://patch.msgid.link/r/a363a69dbf453d4bc1bde276f3b16778620488e1.1750787928.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24iommufd/selftest: Fix iommufd_dirty_tracking with large hugepage sizesNicolin Chen
The hugepage test cases of iommufd_dirty_tracking have the 64MB and 128MB coverages. Both of them are smaller than the default hugepage size 512MB, when CONFIG_PAGE_SIZE_64KB=y. However, these test cases have a variant of using huge pages, which would mmap(MAP_HUGETLB) using these smaller sizes than the system hugepag size. This results in the kernel aligning up the smaller size to 512MB. If a memory was located between the upper 64/128MB size boundary and the hugepage 512MB boundary, it would get wiped out: https://lore.kernel.org/all/aEoUhPYIAizTLADq@nvidia.com/ Given that this aligning up behavior is well documented, we have no choice but to allocate a hugepage aligned size to avoid this unintended wipe out. Instead of relying on the kernel's internal force alignment, pass the same size to posix_memalign() and map(). Also, fix the FIXTURE_TEARDOWN() misusing munmap() to free the memory from posix_memalign(), as munmap() doesn't destroy the allocator meta data. So, call free() instead. Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP") Link: https://patch.msgid.link/r/1ea8609ae6d523fdd4d8efb179ddee79c8582cb6.1750787928.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24drm/xe/hwmon: Fix xe_hwmon_power_max_writeKarthik Poosa
Prevent other bits of mailbox power limit from being overwritten with 0. This issue was due to a missing read and modify of current power limit, before setting a requested mailbox power limit, which is added in this patch. v2: - Improve commit message. (Anshuman) v3: - Rebase. - Rephrase commit message. (Riana) - Add read-modify-write variant of xe_hwmon_pcode_write_power_limit() i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal) - Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits. - Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits writes use xe_hwmon_pcode_rmw_power_limit() only. v4: - Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever applicable. (Riana) Fixes: 25a2aa779fc3 ("drm/xe/hwmon: Add support to manage power limits though mailbox") Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 8aa7306631f088881759398972d503757cf0c901) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 02:03:58 +0000