summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-12-13ARM: dts: aspeed: yosemite4: correct the compatible string for max31790Ricky CX Wu
Fix the compatible string for max31790 to match the binding document. Fixes: 2b8d94f4b4a4 ("ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC") Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20241003074251.3818101-6-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Add required properties for IOE on fan boardsRicky CX Wu
Add the required properties for IO expander on fan boards. Fixes: 2b8d94f4b4a4 ("ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC") Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20241003074251.3818101-5-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Add i2c-mux for CPLD IOE on Spider BoardRicky CX Wu
Add I2C mux for CPLD IOE on Spider Board. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20241003074251.3818101-4-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Add i2c-mux for four NICsRicky CX Wu
Add i2c-mux on Spider board for four NICs and add the temperature sensor and EEPROM for the NICs. Also remove the mctp-controller property on I2C bus 15 because we need to add the property on the I2C mux to each NIC so that the MCTP driver will ensure that each port is configured properly before communicating with the NICs. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20241003074251.3818101-3-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: add i2c-mux for all Server Board slotsRicky CX Wu
Add i2c mux to 8 slots of server board and add the io expanders and eeprom for the slots. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20241003074251.3818101-2-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Remove IO expanders on I2C bus 13Ricky CX Wu
Remove IO expanders on I2C bus 13 according to schematic change. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20241001083021.3462426-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: system1: Add GPIO line namesNinad Palsule
Add following GPIO line names so that userspace can control them - PCH related GPIOs - FPGA related GPIOs Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://patch.msgid.link/20241001191756.234096-4-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: system1: Enable serial gpio0Ninad Palsule
Enable serial GPIO0. Set number of GPIO lines to 128 and bus frequency to 1MHz. Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://patch.msgid.link/20241001191756.234096-3-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: system1: Bump up i2c busses freqNinad Palsule
Bump up i2c8 and i2c15 bus frequency so that PCIe slot and FPGA runs faster Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://patch.msgid.link/20241001191756.234096-2-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: correct the compatible string of adm1272Ricky CX Wu
Remove the space in the compatible string of adm1272 to match the pattern of compatible. Fixes: 2b8d94f4b4a4 ("ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC") Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Fixes: 2b8d94f4b4a4765d ("ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC") Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://patch.msgid.link/20240927085213.331127-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Add i2c-mux for Management BoardRicky CX Wu
Add I2C mux for Management Board to separate the I2C bus 35 for updating CPLD firmware and I2C bus 34 for the other devices. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240926033534.4174707-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: catalina: update NIC1 fru addressPotin Lai
Update NIC1 FRU EEPROM address to 0x52 based on EVT changes. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20240926-catalina-evt-dvt-system-modify-v2-3-a861daeba059@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: catalina: enable mac2Potin Lai
Enable mac2 in advance for DVT HW schematic. - EVT system: - eth0 (mac2): no NCSI - eth1 (mac3): with NCSI - DVT system: - eth0 (mac2): with NCSI - eth1 (mac3): with NCSI Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20240926-catalina-evt-dvt-system-modify-v2-2-a861daeba059@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: catalina: move hdd board i2c mux bus to i2c5Potin Lai
Due to EVT hardware changes, move HDD board i2c mux bus from i2c30 to i2c5. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Link: https://patch.msgid.link/20240926-catalina-evt-dvt-system-modify-v2-1-a861daeba059@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: revise flash layout to 128MBRicky CX Wu
Revise flash layout to 128MB since we are using 1GB flash memory in our project. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240924094430.272074-3-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Revise quad mode to dual modeRicky CX Wu
Revise quad mode to dual mode to keep the write protect feature for the SPI flash because the WP pin is the same pin with IO2 pin in quad mode. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240924094430.272074-2-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: minerva: add fru device for other bladesYang Chen
The Minerva platform has 16 compute blades and 6 network blades, each with an EEPROM that can be operated by the CMM. This commit adds support for each FRU. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://patch.msgid.link/20240924140215.2484170-4-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: minerva: change the i2c mux number for FCBsYang Chen
Change the i2c mux channel to match the correct fan board location. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://patch.msgid.link/20240924140215.2484170-3-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: minerva: Revise the SGPIO line nameYang Chen
Modify the SGPIO line names sent from the CMM CPLD in the DVT version and map the blade and FCB numbers to match the silkscreen labels on the rack as follows: 1. Change the compute blade numbering from 0-15 to 1-16. 2. Change the network blade numbering from 0-5 to 1-6. 3. Update the FCB numbering from TOP0/1, MID0/1, and BOT0/1 to FCB1-6. 4. Revise the SGPIO line name for DVT changed. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://patch.msgid.link/20240924140215.2484170-2-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Enable spi-gpio setting for TPMRicky CX Wu
Enable spi-gpio setting for TPM device in yosemite4. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240920080227.711691-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Spider BoardRicky CX Wu
Revise adc128d818 adc mode on Spider Board according to schematic. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://patch.msgid.link/20240920085007.1076174-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: catalina: add i2c-mux-idle-disconnect to all muxPotin Lai
Add the `i2c-mux-idle-disconnect` property to all i2c-mux nodes to ensure proper behavior when switching between multiple I2C buses. This avoids potential confusion caused by device addresses appearing on multiple buses when they are not actively selected. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20240920-catalina-i2c-mux-fix-2-v1-1-66cce7c54188@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Add gpio pca9506 for CPLD IOERicky CX Wu
We use CPLD to emulate gpio pca9506 I/O expander on each server boards. Therefore, add pca9506 to probe driver for the CPLD I/O expander. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240910054751.2943217-3-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Revise to use adm1281 on Medusa boardRicky CX Wu
Revise to use adm1281 for HSC according to the hardware design change. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240910054751.2943217-2-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: Enable PECI and LPC snoop for IBM System1Manojkiran Eda
This patch enables the PECI interface and configures the LPC Snoop for ports 0x80 and 0x81 in the ASPEED BMC for IBM System1. Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com> Link: https://patch.msgid.link/20240918-dts-aspeed-system1-peci-snoop-v2-1-2d4d17403670@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555Ricky CX Wu
Enable interrupt setting and add GPIO line name for pca9555 for the I/O expanders on Medusa board. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240918101742.1346788-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: Fix Rainier and Blueridge GPIO LED namesEddie James
Blueridge LED names to include the "led-" prefix as is proper. Rainier should match for ease of application design. In addition, the gpio line name ought to match. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://patch.msgid.link/20240917162100.1386130-1-eajames@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: mtmitchell: Add gpio line names for io expandersChanh Nguyen
Add below gpio line names to io expanders for more platform features. - ext-vref-sel - presence-hdd-bp5-n - presence-hdd-bp6-n - bmc-ocp0-en-n - bmc-ocp1-en-n - bmc-riser-en-n - gpi0, gpi1 Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://patch.msgid.link/20240905063521.319416-3-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: mtmitchell: Add I2C FAN controllersChanh Nguyen
Add the MAX31790 nodes as i2c fan controllers. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://patch.msgid.link/20240905063521.319416-2-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: Harma: revise sgpio line namePeter Yin
power-card-enable power-fault-n power-hsc-good power-chassis-good asic0-card-type-detection0-n asic0-card-type-detection1-n asic0-card-type-detection2-n presence-cmm uart-switch-button uart-switch-lsb uart-switch-msb reset-control-cmos-clear Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://patch.msgid.link/20240909080459.3457853-3-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: Harma: add rtc devicePeter Yin
Add "nxp,pcf8563" device and the slave address is 0x51. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://patch.msgid.link/20240909080459.3457853-2-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Enable adc15Ricky CX Wu
Enable Yosemite4 adc15 config for monitoring P3V_BAT_SCALED. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240910022236.1564291-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Enable watchdog2Ricky CX Wu
Enable watchdog2 setting for yosemite4 system. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://patch.msgid.link/20240910080951.3568594-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Change eeprom for Medusa BoardRicky CX Wu
Change eeprom on Medusa Board to AT24C128 according to hardware change. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240910084109.3585923-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: yosemite4: Remove temperature sensors on Medusa BoardRicky CX Wu
Remove two temperature sensors on Medusa Board according to hardware change. Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Link: https://patch.msgid.link/20240910085701.3595248-1-Delphine_CC_Chiu@wiwynn.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-13ARM: dts: aspeed: Fix at24 EEPROM node namesRob Herring (Arm)
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240910215929.823913-1-robh@kernel.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-12-12riscv: dts: thead: Add mailbox nodeMichal Wilczynski
Add mailbox device tree node. This work is based on the vendor kernel [1]. Link: https://github.com/revyos/thead-kernel.git [1] Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com> Reviewed-by: Drew Fustini <dfustini@tenstorrent.com> Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
2024-12-12arm64: dts: mediatek: Modify audio codec name for pmicZhengqiao Xia
change `codec` in pmic (in mt8186-corsola.dtsi) to `audio-codec` Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241212062046.22509-5-xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: mediatek: Add extcon node for DP bridgeZhengqiao Xia
Add extcon node for DP bridge to make the display work properly. Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241212062046.22509-4-xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: mediatek: Add MT8186 Chinchou ChromebooksZhengqiao Xia
MT8186 chinchou, known as ASUS Chromebook CZ12 Flip (CZ1204F) and CZ12(CZ1204C), is a MT8186 based laptop. It is based on the "corsola" design.It includes chinchou and chinchou360, including LTE, stylus, touchscreen combinations. Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Link: https://lore.kernel.org/r/20241212062046.22509-3-xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12dt-bindings: arm: mediatek: Add MT8186 Chinchou ChromebookZhengqiao Xia
Add an entry for the MT8186 based Chinchou Chromebook, also known as the ASUS Chromebook CZ12 Flip (CZ1204F) and CZ12(CZ1204C). Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241212062046.22509-2-xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: mediatek: mt8390-genio-700-evk: Add sound output supportNícolas F. R. A. Prado
Describe all the components to get sound output working on the two audio jacks, Earphone and Speaker, present on the Genio 700 EVK board with the audio DSP enabled. Co-developed-by: Aary Patil <aary.patil@mediatek.com> Signed-off-by: Aary Patil <aary.patil@mediatek.com> Co-developed-by: Suhrid Subramaniam <suhrid.subramaniam@mediatek.com> Signed-off-by: Suhrid Subramaniam <suhrid.subramaniam@mediatek.com> Co-developed-by: parkeryang <Parker.Yang@mediatek.com> Signed-off-by: parkeryang <Parker.Yang@mediatek.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241210-genio700-audio-output-v2-2-c50886ae0be2@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: mt6359: Add #sound-dai-cells propertyNícolas F. R. A. Prado
MT6359 provides digital audio interfaces. Add a #sound-dai-cells property for it to allow pointing to it from dai-link nodes. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20241210-genio700-audio-output-v2-1-c50886ae0be2@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: mediatek: mt8173-evb: Fix MT6397 PMIC sub-node namesChen-Yu Tsai
The MT6397 PMIC bindings specify exact names for its sub-nodes. The names used in the current dts don't match, causing a validation error. Fix up the names. Also drop the label for the regulators node, since any reference should be against the individual regulator sub-nodes. Fixes: 16ea61fc5614 ("arm64: dts: mt8173-evb: Add PMIC support") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20241210092614.3951748-2-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: mediatek: mt8173-elm: Fix MT6397 PMIC sub-node namesChen-Yu Tsai
The MT6397 PMIC bindings specify exact names for its sub-nodes. The names used in the current dts don't match, causing a validation error. Fix up the names. Also drop the label for the regulators node, since any reference should be against the individual regulator sub-nodes. Fixes: 689b937bedde ("arm64: dts: mediatek: add mt8173 elm and hana board") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20241210092614.3951748-1-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: mediatek: mt8395-genio-1200-evk: Drop regulator-compatible propertyChen-Yu Tsai
The "regulator-compatible" property has been deprecated since 2012 in commit 13511def87b9 ("regulator: deprecate regulator-compatible DT property"), which is so old it's not even mentioned in the converted regulator bindings YAML file. It should not have been used for new submissions such as the MT6315. Drop the "regulator-compatible" property from the board dts. The property values are the same as the node name, so everything should continue to work. Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241211052427.4178367-9-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: medaitek: mt8395-nio-12l: Drop regulator-compatible propertyChen-Yu Tsai
The "regulator-compatible" property has been deprecated since 2012 in commit 13511def87b9 ("regulator: deprecate regulator-compatible DT property"), which is so old it's not even mentioned in the converted regulator bindings YAML file. It should not have been used for new submissions such as the MT6315. Drop the "regulator-compatible" property from the board dts. The property values are the same as the node name, so everything should continue to work. Fixes: 96564b1e2ea4 ("arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241211052427.4178367-8-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: mediatek: mt8195-demo: Drop regulator-compatible propertyChen-Yu Tsai
The "regulator-compatible" property has been deprecated since 2012 in commit 13511def87b9 ("regulator: deprecate regulator-compatible DT property"), which is so old it's not even mentioned in the converted regulator bindings YAML file. It is also not listed in the MT6360 regulator and charger bindings. Drop the "regulator-compatible" property from the board dts. The MT6360 bindings actually require the lowercase name, so with the property present the regulators were likely not actually working. Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241211052427.4178367-7-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: mediatek: mt8195-cherry: Drop regulator-compatible propertyChen-Yu Tsai
The "regulator-compatible" property has been deprecated since 2012 in commit 13511def87b9 ("regulator: deprecate regulator-compatible DT property"), which is so old it's not even mentioned in the converted regulator bindings YAML file. It should not have been used for new submissions such as the MT6315. Drop the "regulator-compatible" property from the board dts. The property values are the same as the node name, so everything should continue to work. Fixes: 260c04d425eb ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241211052427.4178367-6-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-12-12arm64: dts: mediatek: mt8192-asurada: Drop regulator-compatible propertyChen-Yu Tsai
The "regulator-compatible" property has been deprecated since 2012 in commit 13511def87b9 ("regulator: deprecate regulator-compatible DT property"), which is so old it's not even mentioned in the converted regulator bindings YAML file. It should not have been used for new submissions such as the MT6315. Drop the "regulator-compatible" property from the board dts. The property values are the same as the node name, so everything should continue to work. Fixes: 3183cb62b033 ("arm64: dts: mediatek: asurada: Add SPMI regulators") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241211052427.4178367-5-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
generated by cgit (git 2.34.1) at 2025-09-13 06:11:38 +0000