summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-08net: vrf: ipv6 support for local traffic to local addressesDavid Ahern
Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: vrf: ipv4 support for local traffic to local addressesDavid Ahern
Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: vrf: Minor refactoring for local address patchesDavid Ahern
Move the stripping of the ethernet header from is_ip_tx_frame into the ipv4 and ipv6 outbound functions and collapse vrf_send_v4_prep into vrf_process_v4_outbound. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07gue: Implement direction IP encapsulationTom Herbert
This patch implements direct encapsulation of IPv4 and IPv6 packets in UDP. This is done a version "1" of GUE and as explained in I-D draft-ietf-nvo3-gue-03. Changes here are only in the receive path, fou with IPxIPx already supports the transmit side. Both the normal receive path and GRO path are modified to check for GUE version and check for IP version in the case that GUE version is "1". Tested: IPIP with direct GUE encap 1 TCP_STREAM 4530 Mbps 200 TCP_RR 1297625 tps 135/232/444 90/95/99% latencies IP4IP6 with direct GUE encap 1 TCP_STREAM 4903 Mbps 200 TCP_RR 1184481 tps 149/253/473 90/95/99% latencies IP6IP6 direct GUE encap 1 TCP_STREAM 5146 Mbps 200 TCP_RR 1202879 tps 146/251/472 90/95/99% latencies SIT with direct GUE encap 1 TCP_STREAM 6111 Mbps 200 TCP_RR 1250337 tps 139/241/467 90/95/99% latencies Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07Merge tag 'iio-fixes-for-4.7a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of iio fixes for the 4.7 cycle. A slightly bumper set due to travel delaying the pull request and a fair few issues with the recent merge window patches. Patches all over the place. The st-sensors one is probably the most involved, but definitly solves the issues seen. Note there are some other issues around that handler (and the fact that a lot of boards tie a level interrupt chip to an edge interrupt only irq chip). These are not regressions however, so will turn up the slow route. * core - iio_trigger_attach_pollfunc had some really badly wrong error handling. Another nasty triggered whilst chasing down issues with the st sensors rework below. * ad5592r - fix an off by one error when allocating channels. * am2315 - a stray mutex unlock before we ever take the lock. * apds9960 - missing a parent in the driver model (which should be the i2c device). Result is it doesn't turn up under /sys/bus/i2c/devices which some userspace code uses for repeatable device identification. * as3935 - ABI usage bug which meant a processed value was reported as raw. Now reporting scale as well to ensure userspace has the info it needs. - Don't return processed value via the buffer - it doesn't conform to the ABI and will overflow in some cases. - Fix a wrongly sized buffer which would overflow trashing part of the stack. Also move it onto the heap as part of the fix. * bh1780 - a missing return after write in debugfs lead to an incorrect read and a null pointer dereference. - dereferencing the wrong pointer in suspend and resume leading to unpredictable results. - assign a static name to avoid accidentally ending up with no name if loaded via device tree. * bmi160 - output data rate for the accelerometer was incorrectly reported. Fix it. - writing the output data rate was also wrong due to reverse parameters. * bmp280 - error message for wrong chip ID gave the wrong expected value. * hdc100x - mask for writing the integration time was wrong allowin g us to get 'stuck' in a particular value with no way back. - temperature reported in celsius rather than millicelsius as per the ABI. - Get rid of some incorrect data shifting which lead to readings being rather incorrect. * max44000 - drop scale attribute for proximity as it is an unscaled value (depends on what is in range rather than anything knowable at the detector). * st-pressure - ABI compliance fixes - units were wrong. * st-sensors - We introduced some nasty issues with the recent switch over to a a somewhat threaded handler in that we broke using a software trigger with these devices. Now do it properly. It's a larger patch than ideal for a fix, but the logic is straight forward. - Make sure the trigger is initialized before requesting the interrupt. This matters now the interrupt can be shared. Before it was ugly and wrong but short of flakey hardware could not be triggered. - Hammer down the dataready pin at boot - otherwise with really unlucky timing things could get interestingly wedged requiring a hard power down of the chip.
2016-06-07usb: echi-hcd: Add ehci_setup check before echi_shutdownSrinivas Kandagatla
This patch protects system from crashing at shutdown in cases where usb host is not added yet from OTG controller driver. As ehci_setup() not done yet, so stop accessing registers or variables initialized as part of ehci_setup(). The use case is simple, for boards like DB410c where the usb host or device functionality is decided based on the micro-usb cable presence. If the board boots up with micro-usb connected, the OTG driver like echi-msm would not add the usb host by default. However a system shutdown would go and access registers and uninitialized variables, resulting in below crash. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = ffffffc034581000 [00000008] *pgd=0000000000000000, *pud=0000000000000000 CPU: 2 PID: 1957 Comm: reboot Not tainted 4.6.0+ #99 task: ffffffc034bc0000 ti: ffffffc0345cc000 task.ti: ffffffc0345cc000 PC is at ehci_halt+0x54/0x108 LR is at ehci_halt+0x38/0x108 pc : [<ffffff800869837c>] lr : [<ffffff8008698360>] pstate: a00001c5 sp : ffffffc0345cfc60 x29: ffffffc0345cfc60 x28: ffffffc0345cc000 x27: ffffff8008a4d000 x26: 000000000000008e x25: ffffff8008d86cb0 x24: ffffff800908b040 x23: ffffffc036068870 x22: ffffff8009d0a000 x21: ffffffc03512a410 x20: ffffffc03512a410 x19: ffffffc03512a338 x18: 00000000000065ba x17: ffffff8009b16b80 x16: 0000000000000003 x15: 00000000000065b9 x14: 00000000000065b6 x13: 0000000000000000 x12: 0000000000000000 x11: 000000000000003d x10: ffffffc0345cf9e0 x9 : 0000000000000001 x8 : ffffffc0345cc000 x7 : ffffff8008698360 x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000008 x0 : ffffffc034bc0000 Process reboot (pid: 1957, stack limit = 0xffffffc0345cc020) Stack: (0xffffffc0345cfc60 to 0xffffffc0345d0000) fc60: ffffffc0345cfc90 ffffff8008698448 ffffffc03512a338 ffffffc03512a338 fc80: ffffffc03512a410 ffffff8008a3bbfc ffffffc0345cfcc0 ffffff8008698548 fca0: ffffffc03512a338 ffffffc03512a000 ffffffc03512a410 ffffff8009d0a000 fcc0: ffffffc0345cfcf0 ffffff800865d2bc ffffffc036068828 ffffffc036068810 fce0: ffffffc036003810 ffffff800853f43c ffffffc0345cfd00 ffffff800854338c fd00: ffffffc0345cfd10 ffffff800853f45c ffffffc0345cfd60 ffffff80080e0f48 fd20: 0000000000000000 0000000001234567 ffffff8008f8c000 ffffff8008f8c060 fd40: 0000000000000000 0000000000000015 0000000000000120 ffffff80080e0f30 fd60: ffffffc0345cfd70 ffffff80080e1020 ffffffc0345cfd90 ffffff80080e12fc fd80: 0000000000000000 0000000001234567 0000000000000000 ffffff8008085e70 fda0: 0000000000000000 0000005592905000 ffffffffffffffff 0000007f79daf1cc fdc0: 0000000000000000 0000000000000000 0000007ffcbb1198 000000000000000a fde0: 00000055928d3f58 0000000000000001 ffffffc034900000 00000000fffffffe fe00: ffffffc034900000 0000007f79da902c ffffffc0345cfe40 ffffff800820af38 fe20: 0000000000000000 0000007ffcbb1078 ffffffffffffffff ffffff80081e9b38 fe40: ffffffc0345cfe60 ffffff80081eb410 ffffffc0345cfe60 ffffff80081eb444 fe60: ffffffc0345cfec0 ffffff80081ec4f4 0000000000000000 0000007ffcbb1078 fe80: ffffffffffffffff 0000000000000015 ffffffc0345cfec0 0000007ffcbb1078 fea0: 0000000000000002 000000000000000a ffffffffffffffff 0000000000000000 fec0: 0000000000000000 ffffff8008085e70 fffffffffee1dead 0000000028121969 fee0: 0000000001234567 0000000000000000 ffffffffffffffff 8080800000800000 ff00: 0000800000808080 0000007ffcbb10f0 000000000000008e fefeff54918cb8c7 ff20: 7f7f7f7fffffffff 0101010101010101 0000000000000010 0000000000000000 ff40: 0000000000000000 0000007f79e33588 0000005592905eb8 0000007f79daf1b0 ff60: 0000007ffcbb1340 0000005592906000 0000005592905000 0000005592906000 ff80: 0000005592907000 0000000000000002 0000007ffcbb1d98 0000005592906000 ffa0: 00000055928d2000 0000000000000000 0000000000000000 0000007ffcbb1aa0 ffc0: 00000055928b819c 0000007ffcbb1aa0 0000007f79daf1cc 0000000000000000 ffe0: fffffffffee1dead 000000000000008e 05ef555057155555 d555544d55d775d3 Call trace: Exception stack(0xffffffc0345cfaa0 to 0xffffffc0345cfbc0) Set corner to 6 faa0: ffffffc03512a338 ffffffc03512a410 ffffffc0345cfc60 ffffff800869837c fac0: ffffff8008114210 0000000100000001 ffffff8009ce1b20 ffffff8009ce5f20 fae0: ffffffc0345cfb80 ffffff80081145a8 ffffffc0345cfc10 ffffff800810b924 fb00: ffffffc0345cc000 00000000000001c0 ffffffc03512a410 ffffff8009d0a000 fb20: ffffffc036068870 ffffff800908b040 ffffff8008d86cb0 000000000000008e fb40: ffffffc034bc0000 0000000000000008 0000000000000000 0000000000000000 fb60: 0000000000000001 0000000000000080 0000000000000000 ffffff8008698360 fb80: ffffffc0345cc000 0000000000000001 ffffffc0345cf9e0 000000000000003d fba0: 0000000000000000 0000000000000000 00000000000065b6 00000000000065b9 [<ffffff800869837c>] ehci_halt+0x54/0x108 [<ffffff8008698448>] ehci_silence_controller+0x18/0xcc [<ffffff8008698548>] ehci_shutdown+0x4c/0x64 [<ffffff800865d2bc>] usb_hcd_platform_shutdown+0x1c/0x24 [<ffffff800854338c>] platform_drv_shutdown+0x20/0x28 [<ffffff800853f45c>] device_shutdown+0xf4/0x1b0 [<ffffff80080e0f48>] kernel_restart_prepare+0x34/0x3c [<ffffff80080e1020>] kernel_restart+0x14/0x74 [<ffffff80080e12fc>] SyS_reboot+0x110/0x21c [<ffffff8008085e70>] el0_svc_naked+0x24/0x28 Code: 53001c42 350000a2 d5033e9f 91002021 (b9000022) Fixes 4bb3cad7125b ("usb: host: ehci-msm: Register usb shutdown function") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Pramod Gurav <pramod.gurav@linaro.org> Tested-by: Andy Gross <andy.gross@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07usb: host: ehci-msm: Conditionally call ehci suspend/resumeAndy Gross
This patch fixes a suspend/resume issue where the driver is blindly calling ehci_suspend/resume functions when the ehci hasn't been setup. This results in a crash during suspend/resume operations. Signed-off-by: Andy Gross <andy.gross@linaro.org> Tested-by: Pramod Gurav <pramod.gurav@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07MAINTAINERS: Add file patterns for usb device tree bindingsGeert Uytterhoeven
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07usb: host: ehci-tegra: Avoid getting the same reset twiceThierry Reding
Starting with commit 0b52297f2288 ("reset: Add support for shared reset controls") there is a reference count for reset control assertions. The goal is to allow resets to be shared by multiple devices and an assert will take effect only when all instances have asserted the reset. In order to preserve backwards-compatibility, all reset controls become exclusive by default. This is to ensure that reset_control_assert() can immediately assert in hardware. However, this new behaviour triggers the following warning in the EHCI driver for Tegra: [ 3.365019] ------------[ cut here ]------------ [ 3.369639] WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x16c/0x23c [ 3.382151] Modules linked in: [ 3.385214] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-next-20160503 #140 [ 3.392769] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 3.399046] [<c010fa50>] (unwind_backtrace) from [<c010b120>] (show_stack+0x10/0x14) [ 3.406787] [<c010b120>] (show_stack) from [<c0347dcc>] (dump_stack+0x90/0xa4) [ 3.414007] [<c0347dcc>] (dump_stack) from [<c011f4fc>] (__warn+0xe8/0x100) [ 3.420964] [<c011f4fc>] (__warn) from [<c011f5c4>] (warn_slowpath_null+0x20/0x28) [ 3.428525] [<c011f5c4>] (warn_slowpath_null) from [<c03cc8cc>] (__of_reset_control_get+0x16c/0x23c) [ 3.437648] [<c03cc8cc>] (__of_reset_control_get) from [<c0526858>] (tegra_ehci_probe+0x394/0x518) [ 3.446600] [<c0526858>] (tegra_ehci_probe) from [<c04516d8>] (platform_drv_probe+0x4c/0xb0) [ 3.455029] [<c04516d8>] (platform_drv_probe) from [<c044fe78>] (driver_probe_device+0x1ec/0x330) [ 3.463892] [<c044fe78>] (driver_probe_device) from [<c0450074>] (__driver_attach+0xb8/0xbc) [ 3.472320] [<c0450074>] (__driver_attach) from [<c044e1ec>] (bus_for_each_dev+0x68/0x9c) [ 3.480489] [<c044e1ec>] (bus_for_each_dev) from [<c044f338>] (bus_add_driver+0x1a0/0x218) [ 3.488743] [<c044f338>] (bus_add_driver) from [<c0450768>] (driver_register+0x78/0xf8) [ 3.496738] [<c0450768>] (driver_register) from [<c010178c>] (do_one_initcall+0x40/0x170) [ 3.504909] [<c010178c>] (do_one_initcall) from [<c0c00ddc>] (kernel_init_freeable+0x158/0x1f8) [ 3.513600] [<c0c00ddc>] (kernel_init_freeable) from [<c0810784>] (kernel_init+0x8/0x114) [ 3.521770] [<c0810784>] (kernel_init) from [<c0107778>] (ret_from_fork+0x14/0x3c) [ 3.529361] ---[ end trace 4bda87dbe4ecef8a ]--- The reason is that Tegra SoCs have three EHCI controllers, each with a separate reset line. However the first controller contains UTMI pads configuration registers that are shared with its siblings and that are reset as part of the first controller's reset. There is special code in the driver to assert and deassert this shared reset at probe time, and it does so irrespective of which controller is probed first to ensure that these shared registers are reset before any of the controllers are initialized. Unfortunately this means that if the first controller gets probed first, it will request its own reset line and will subsequently request the same reset line again (temporarily) to perform the reset. This used to work fine before the above-mentioned commit, but now triggers the new WARN. Work around this by making sure we reuse the controller's reset if the controller happens to be the first controller. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07usb: host: ehci-tegra: Grab the correct UTMI pads resetThierry Reding
There are three EHCI controllers on Tegra SoCs, each with its own reset line. However, the first controller contains a set of UTMI configuration registers that are shared with its siblings. These registers will only be reset as part of the first controller's reset. For proper operation it must be ensured that the UTMI configuration registers are reset before any of the EHCI controllers are enabled, irrespective of the probe order. Commit a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to broken USB") introduced code that ensures the first controller is always reset before setting up any of the controllers, and is never again reset afterwards. This code, however, grabs the wrong reset. Each EHCI controller has two reset controls attached: 1) the USB controller reset and 2) the UTMI pads reset (really the first controller's reset). In order to reset the UTMI pads registers the code must grab the second reset, but instead it grabbing the first. Fixes: a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to broken USB") Acked-by: Jon Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07USB: mos7720: delete parportSudip Mukherjee
parport subsystem has introduced parport_del_port() to delete a port when it is going away. Without parport_del_port() the registered port will not be unregistered. To reproduce and verify the error: Command to be used is : ls /sys/bus/parport/devices 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and the command still shows "parport0". 4) Attach the device again and we get "parport1". With the patch applied: 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and there is no output as "parport0" is now removed. 4) Attach device again to get "parport0" again. Cc: <stable@vger.kernel.org> # 4.2+ Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07USB: OHCI: Don't mark EDs as ED_OPER if scheduling failsMichał Pecio
Since ed_schedule begins with marking the ED as "operational", the ED may be left in such state even if scheduling actually fails. This allows future submission attempts to smuggle this ED to the hardware behind the scheduler's back and without linking it to the ohci->eds_in_use list. The former causes bandwidth saturation and data loss on isoc endpoints, the latter crashes the kernel when attempt is made to unlink such ED from this list. Fix ed_schedule to update ED state only on successful return. Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-08powerpc/mm/hash: Compute the segment size correctly for ISA 3.0Aneesh Kumar K.V
PowerISA 3.0 encodes the segment size in the second half of hash page table entry. Update hpte_decode() accordingly. Fixes: 50de596de8be ("powerpc/mm/hash: Add support for Power9 Hash") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-08powerpc/mm/radix: Fix always false comparison against MMU_NO_CONTEXTAneesh Kumar K.V
In some of the radix TLB flush routines, we use a local to store the mm->context.id, AKA the PID. Currently we use an int, but the PID is unsigned long, so large values of PID will be truncated. In particular MMU_NO_CONTEXT is -1, which means all our comparisons against that value can never be true. This means we'll issue TLB flushes when we shouldn't on radix enabled machines. Fix it by using an unsigned long for the local. Discovered by Coverity. Fixes: 1a472c9dba6b ("powerpc/mm/radix: Add tlbflush routines") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> [mpe: Write change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Fixes for crap of assorted ages: EOPENSTALE one is 4.2+, autofs one is 4.6, d_walk - 3.2+. The atomic_open() and coredump ones are regressions from this window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: coredump: fix dumping through pipes fix a regression in atomic_open() fix d_walk()/non-delayed __d_free() race autofs braino fix for do_last() fix EOPENSTALE bug in do_last()
2016-06-07hwmon: (lm90) use proper type for update_intervalWolfram Sang
The code handles this variable always as unsigned, so adapt the type. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-06-07hwmon: (ina2xx) Document compatible for INA231Krzysztof Kozlowski
Document the compatible for INA231 sensor. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-06-07hwmon: (fam15h_power) Disable preemption when reading registersBorislav Petkov
We need to read a bunch of registers on each compute unit and possibly on the current CPU too. Disable preemption around it. Otherwise, you get: BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/327 caller is read_registers+0x6a/0x110 [fam15h_power] CPU: 3 PID: 327 Comm: systemd-udevd Not tainted 4.7.0-rc1+ #4 Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.08 01/28/2016 ... Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Rui Huang <ray.huang@amd.com> Cc: Sherry Hurwitz <sherry.hurwitz@amd.com> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by: Huang Rui <ray.huang@amd.com> Tested-by: Huang Rui <ray.huang@amd.com> Fixes: fa7943449943 ("hwmon: (fam15h_power) Add compute unit accumulated power") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-06-07coredump: fix dumping through pipesMateusz Guzik
The offset in the core file used to be tracked with ->written field of the coredump_params structure. The field was retired in favour of file->f_pos. However, ->f_pos is not maintained for pipes which leads to breakage. Restore explicit tracking of the offset in coredump_params. Introduce ->pos field for this purpose since ->written was already reused. Fixes: a00839395103 ("get rid of coredump_params->written"). Reported-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-07fix a regression in atomic_open()Al Viro
open("/foo/no_such_file", O_RDONLY | O_CREAT) on should fail with EACCES when /foo is not writable; failing with ENOENT is obviously wrong. That got broken by a braino introduced when moving the creat_error logics from atomic_open() to lookup_open(). Easy to fix, fortunately. Spotted-by: "Yan, Zheng" <ukernel@gmail.com> Tested-by: "Yan, Zheng" <ukernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-07fix d_walk()/non-delayed __d_free() raceAl Viro
Ascend-to-parent logics in d_walk() depends on all encountered child dentries not getting freed without an RCU delay. Unfortunately, in quite a few cases it is not true, with hard-to-hit oopsable race as the result. Fortunately, the fix is simiple; right now the rule is "if it ever been hashed, freeing must be delayed" and changing it to "if it ever had a parent, freeing must be delayed" closes that hole and covers all cases the old rule used to cover. Moreover, pipes and sockets remain _not_ covered, so we do not introduce RCU delay in the cases which are the reason for having that delay conditional in the first place. Cc: stable@vger.kernel.org # v3.2+ (and watch out for __d_materialise_dentry()) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-08cpufreq: intel_pstate: Fix ->set_policy() interface for no_turboSrinivas Pandruvada
When turbo is disabled, the ->set_policy() interface is broken. For example, when turbo is disabled and cpuinfo.max = 2900000 (full max turbo frequency), setting the limits results in frequency less than the requested one: Set 1000000 KHz results in 0700000 KHz Set 1500000 KHz results in 1100000 KHz Set 2000000 KHz results in 1500000 KHz This is because the limits->max_perf fraction is calculated using the max turbo frequency as the reference, but when the max P-State is capped in intel_pstate_get_min_max(), the reference is not the max turbo P-State. This results in reducing max P-State. One option is to always use max turbo as reference for calculating limits. But this will not be correct. By definition the intel_pstate sysfs limits, shows percentage of available performance. So when BIOS has disabled turbo, the available performance is max non turbo. So the max_perf_pct should still show 100%. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw : Subject & changelog, rewrite in fewer lines of code ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-08cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy()Srinivas Pandruvada
The limits->max_perf is rounded_up but immediately overwritten by another assignment to limits->max_perf. Move that operation to the correct location. While here also added a pr_debug() call in ->set_policy to aid in debugging. Fixes: 785ee2788141 (cpufreq: intel_pstate: Fix limits->max_perf rounding error) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw : Subject & changelog ] Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-08of: fix autoloading due to broken modalias with no 'compatible'Wolfram Sang
Because of an improper dereference, a stray 'C' character was output to the modalias when no 'compatible' was specified. This is the case for some old PowerMac drivers which only set the 'name' property. Fix it to let them match again. Reported-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Mathieu Malaterre <malat@debian.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Andreas Schwab <schwab@linux-m68k.org> Fixes: 6543becf26fff6 ("mod/file2alias: make modalias generation safe for cross compiling") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-08powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was addedMichael Ellerman
The recent commit 7cc851039d64 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") added a new PVR mask & value to the start of the ibm_architecture_vec[] array. However it missed the fact that further down in the array, we hard code the offset of one of the fields, and then at boot use that value to patch the value in the array. This means every update to the array must also update the #define, ugh. This means that on pseries machines we will misreport to firmware the number of cores we support, by a factor of threads_per_core. Fix it for now by updating the #define. Fixes: 7cc851039d64 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains two Netfilter/IPVS fixes for your net tree, they are: 1) Fix missing alignment in next offset calculation for standard targets, introduced in the previous merge window, patch from Florian Westphal. 2) Fix to correct the handling of outgoing connections which use the SIP-pe such that the binding of a real-server is updated when needed. This was an omission from changes introduced by Marco Angaroni in the previous merge window too, to allow handling of outgoing connections by the SIP-pe. Patch and report came via Simon Horman. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07tcp: record TLP and ER timer stats in v6 statsYuchung Cheng
The v6 tcp stats scan do not provide TLP and ER timer information correctly like the v4 version . This patch fixes that. Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)") Fixes: eed530b6c676 ("tcp: early retransmit") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net: sched: fix tc_should_offload for specific clsact classesDaniel Borkmann
When offloading classifiers such as u32 or flower to hardware, and the qdisc is clsact (TC_H_CLSACT), then we need to differentiate its classes, since not all of them handle ingress, therefore we must leave those in software path. Add a .tcf_cl_offload() callback, so we can generically handle them, tested on ixgbe. Fixes: 10cbc6843446 ("net/sched: cls_flower: Hardware offloaded filters statistics support") Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support") Fixes: a1b7c5fd7fe9 ("net: sched: add cls_u32 offload hooks for netdevs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07act_police: fix a crash during removalWANG Cong
The police action is using its own code to initialize tcf hash info, which makes us to forgot to initialize a->hinfo correctly. Fix this by calling the helper function tcf_hash_create() directly. This patch fixed the following crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffff810c099f>] __lock_acquire+0xd3/0xf91 PGD d3c34067 PUD d3e18067 PMD 0 Oops: 0000 [#1] SMP CPU: 2 PID: 853 Comm: tc Not tainted 4.6.0+ #87 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d3e28040 ti: ffff8800d3f6c000 task.ti: ffff8800d3f6c000 RIP: 0010:[<ffffffff810c099f>] [<ffffffff810c099f>] __lock_acquire+0xd3/0xf91 RSP: 0000:ffff88011b203c80 EFLAGS: 00010002 RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000028 RBP: ffff88011b203d40 R08: 0000000000000001 R09: 0000000000000000 R10: ffff88011b203d58 R11: ffff88011b208000 R12: 0000000000000001 R13: ffff8800d3e28040 R14: 0000000000000028 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 00000000d4be1000 CR4: 00000000000006e0 Stack: ffff8800d3e289c0 0000000000000046 000000001b203d60 ffffffff00000000 0000000000000000 ffff880000000000 0000000000000000 ffffffff00000000 ffffffff8187142c ffff88011b203ce8 ffff88011b203ce8 ffffffff8101dbfc Call Trace: <IRQ> [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff8101dbfc>] ? native_sched_clock+0x1a/0x35 [<ffffffff8101dbfc>] ? native_sched_clock+0x1a/0x35 [<ffffffff810a9604>] ? sched_clock_local+0x11/0x78 [<ffffffff810bf6a1>] ? mark_lock+0x24/0x201 [<ffffffff810c1dbd>] lock_acquire+0x120/0x1b4 [<ffffffff810c1dbd>] ? lock_acquire+0x120/0x1b4 [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff81aad89f>] _raw_spin_lock_bh+0x3c/0x72 [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff8187142c>] __tcf_hash_release+0x77/0xd1 [<ffffffff81871a27>] tcf_action_destroy+0x49/0x7c [<ffffffff81870b1c>] tcf_exts_destroy+0x20/0x2d [<ffffffff8189273b>] u32_destroy_key+0x1b/0x4d [<ffffffff81892788>] u32_delete_key_freepf_rcu+0x1b/0x1d [<ffffffff810de3b8>] rcu_process_callbacks+0x610/0x82e [<ffffffff8189276d>] ? u32_destroy_key+0x4d/0x4d [<ffffffff81ab0bc1>] __do_softirq+0x191/0x3f4 Fixes: ddf97ccdd7cb ("net_sched: add network namespace support for tc actions") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07Merge branch 'net-sched-fast-stats'David S. Miller
Eric Dumazet says: ==================== net: sched: faster stats gathering A while back, I sent one RFC patch using lockless stats gathering on 64bit arches. This patch series does it more cleanly, using a seqcount. Since qdisc/class stats are written at dequeue() time, we can ask the dequeue to change the seqcount, so that stats readers can avoid taking the root qdisc lock, and instead the typical read_seqcount_{begin|retry} guarded loop. This does not change fast path costs, as the seqcount increments are not more expensive than the bit manipulation, and allows readers to not freeze the fast path anymore. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net: sched: do not acquire qdisc spinlock in qdisc/class stats dumpEric Dumazet
Large tc dumps (tc -s {qdisc|class} sh dev ethX) done by Google BwE host agent [1] are problematic at scale : For each qdisc/class found in the dump, we currently lock the root qdisc spinlock in order to get stats. Sampling stats every 5 seconds from thousands of HTB classes is a challenge when the root qdisc spinlock is under high pressure. Not only the dumps take time, they also slow down the fast path (queue/dequeue packets) by 10 % to 20 % in some cases. An audit of existing qdiscs showed that sch_fq_codel is the only qdisc that might need the qdisc lock in fq_codel_dump_stats() and fq_codel_dump_class_stats() In v2 of this patch, I now use the Qdisc running seqcount to provide consistent reads of packets/bytes counters, regardless of 32/64 bit arches. I also changed rate estimators to use the same infrastructure so that they no longer need to lock root qdisc lock. [1] http://static.googleusercontent.com/media/research.google.com/en//pubs/archive/43838.pdf Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Kevin Athey <kda@google.com> Cc: Xiaotian Pei <xiaotian@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net_sched: transform qdisc running bit into a seqcountEric Dumazet
Instead of using a single bit (__QDISC___STATE_RUNNING) in sch->__state, use a seqcount. This adds lockdep support, but more importantly it will allow us to sample qdisc/class statistics without having to grab qdisc root lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07fq_codel: return non zero qlen in class dumpsEric Dumazet
We properly scan the flow list to count number of packets, but John passed 0 to gnet_stats_copy_queue() so we report a zero value to user space instead of the result. Fixes: 640158536632 ("net: sched: restrict use of qstats qlen") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.r.fastabend@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07Merge branch 'u32-hwoffload-fixes'David S. Miller
Jakub Kicinski says: ==================== cls_u32 hardware offload fixes This set fixes two small issues with error codes I noticed in cls_u32. Second patch could be viewed as user space API change but that portion of API is not part of any release, yet. Compile tested only. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net: cls_u32: be more strict about skip-sw flagJakub Kicinski
Return an error if user requested skip-sw and the underlaying hardware cannot handle tc offloads (or offloads are disabled). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net: cls_u32: fix error code for invalid flagsJakub Kicinski
'err' variable is not set in this test, we would return whatever previous test set 'err' to. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07gtp: #define _UAPI_LINUX_GTP_H_ and not _UAPI_LINUX_GTP_H__Colin Ian King
Fix clang build warning: ./include/uapi/linux/gtp.h:1:9: warning: '_UAPI_LINUX_GTP_H_' is used as a header guard here, followed by #define of a different macro [-Wheader-guard] fix by defining _UAPI_LINUX_GTP_H_ and not _UAPI_LINUX_GTP_H__ Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "This finally removes the CLK_IS_ROOT flag by picking up the last few stragglers that didn't get merged by anyone this time around. Better to do it now than wait for another one to pop up. There's also a minor maintainers update and a Kconfig fix" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: nxp: Select MFD_SYSCON for creg driver MAINTAINERS: Add file patterns for clock device tree bindings clk: Remove CLK_IS_ROOT flag clk: microchip: Remove CLK_IS_ROOT powerpc/512x: clk: Remove CLK_IS_ROOT vexpress/spc: Remove CLK_IS_ROOT
2016-06-07Merge branch 'be2net-noncrit-fixes'David S. Miller
Sathya Perla says: ==================== be2net: patch set Hi David, the following patch set contains three non-critical fixes that can go into the net-next tree. Patch 1 fixes the logic for provisioning queue pairs on VFs to take into account the limit on number of TXQs too as in some profiles the number of TXQs is less than that of RXQs. Patch 2 enables WoL support from shutdown on Skyhawk. Patch 3 enhances the logic for provisioning queue pairs on VFs on SR-IOV over multi-partition configs. Each PF (partition) on a port has to compute the number of RSS tables it's VFs can use. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07be2net: Fix provisioning of RSS for VFs in multi-partition configurationsSomnath Kotur
Currently, we do not distribute queue resources to enable RSS for VFs in multi-channel/partition configurations. Fix this by having each PF(SRIOV capable) calculate it's share of the 15 RSS Policy Tables available per port before provisioning resources for all the VFs. This proportional share calculation is done based on division of the PF's MAX VFs with the Total MAX VFs on that port. It also needs to learn about the no: of NIC PFs on the port and subtract that from the 15 RSS Policy Tables on the port. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07be2net: Enable Wake-On-LAN from shutdown for SkyhawkSriharsha Basavapatna
Skyhawk does support wake-up from ACPI shutdown state - S5, provided the platform supports it (like Auxiliary power source etc). The changes listed below are done to fix this. 1) There's no need to defer the HW configuration of WOL to be_suspend(). Remove this in be_suspend() and move it to be_set_wol() ethtool function so it is configured directly in the context of ethtool. This automatically takes care of the shutdown case. 2) The driver incorrectly uses WOL_CAP field in the FW response to get_acpi_wol_cap() command, to determine if WOL is enabled. Instead the driver must rely on the macaddr field in the response to infer WOL state. 3) In be_get_config() during init, if we find that WOL is enabled in FW, call pci_enable_wake() to enable pmcsr.pme_en bit. This is needed to support persistent WOL configuration provided by the FW in some platforms. 4) Remove code in be_set_wol() that writes to PCICFG_PM_CONTROL_OFFSET to set pme_en bit; pci_enable_wake() sets that. Fixes: 028991e49 ("Enabling Wake-on-LAN is not supported in S5 state") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07be2net: use max-TXQs limit too while provisioning VF queue pairsSuresh Reddy
When the PF driver provisions resources for VFs, it currently only looks at max RSS queues available to calculate the number of VF queue pairs. This logic breaks when there are less number of TX-queues than RSS-queues. This patch fixes this problem by using the max-TXQs available in the PF-pool in the calculations. As a part of this change the be_calculate_vf_qs() routine is renamed as be_calculate_vf_res() and the code that calculates limits on other related resources is moved here to contain all resource calculation code inside one routine. Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net: fec: fix spelling mistakes and add missing newlineColin Ian King
trivial fix to spelling mistakes and add missing newline in pr_err messages Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07Merge branch 'bnxt_en-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: Bug fixes. Fix a race condition and VLAN rx acceleration logic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07bnxt_en: Simplify VLAN receive logic.Michael Chan
Since both CTAG and STAG rx acceleration must be enabled together, we only need to check one feature flag (NETIF_F_HW_VLAN_CTAG_RX) before calling __vlan_hwaccel_put_tag(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together.Michael Chan
The hardware can only be set to strip or not strip both the VLAN CTAG and STAG. It cannot strip one and not strip the other. Add logic to bnxt_fix_features() to toggle both feature flags when the user is toggling one of them. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07bnxt_en: Fix tx push race condition.Michael Chan
Set the is_push flag in the software BD before the tx data is pushed to the chip. It is possible to get the tx interrupt as soon as the tx data is pushed. The tx handler will not handle the event properly if the is_push flag is not set and it will crash. Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07drivers/net: support hdlc function for QE-UCCZhao Qiang
The driver add hdlc support for Freescale QUICC Engine. It support NMSI and TSA mode. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07fsl/qe: Add QE TDM libZhao Qiang
QE has module to support TDM, some other protocols supported by QE are based on TDM. add a qe-tdm lib, this lib provides functions to the protocols using TDM to configurate QE-TDM. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07fsl/qe: Make regs resouce_size_tZhao Qiang
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 20:09:31 +0000