summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-21wifi: rtw88: Extend rtw_phy_config_swing_table() for RTL8814AUBitterblue Smith
Select the TX power tracking tables for RF paths C and D as well. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/e1e532c9-8733-4ec8-84fe-ced4af6c08da@gmail.com
2025-02-21wifi: rtw88: Fix rtw_rx_phy_stat() for RTL8814AUBitterblue Smith
Record statistics for the 3SS rates too. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/39e3c7cf-37ed-4c0e-af00-dcd9eab351f0@gmail.com
2025-02-21wifi: rtw88: Fix rtw_init_vht_cap() for RTL8814AUBitterblue Smith
Set the MCS maps and the highest rates according to the number of spatial streams the chip has. For RTL8814AU that is 3. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/e86aa009-b5bf-4b3a-8112-ea5e3cd49465@gmail.com
2025-02-21wifi: rtw88: Fix rtw_init_ht_cap() for RTL8814AUBitterblue Smith
Set the RX mask and the highest RX rate according to the number of spatial streams the chip can receive. For RTL8814AU that is 3. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/4e786f50-ed1c-4387-8b28-e6ff00e35e81@gmail.com
2025-02-21wifi: rtw88: Fix rtw_desc_to_mcsrate() to handle MCS16-31Bitterblue Smith
This function translates the rate number reported by the hardware into something mac80211 can understand. It was ignoring the 3SS and 4SS HT rates. Translate them too. Also set *nss to 0 for the HT rates, just to make sure it's initialised. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/d0a5a86b-4869-47f6-a5a7-01c0f987cc7f@gmail.com
2025-02-21wifi: rtw88: Fix rtw_mac_power_switch() for RTL8814AUBitterblue Smith
rtw_mac_power_switch() checks bit 8 of REG_SYS_STATUS1 to see if the chip is powered on. This bit appears to be always on in the RTL8814AU, so ignore it. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/2f0fcffb-3067-4d95-a68c-f2f3a5a47921@gmail.com
2025-02-20Merge branch 'selftests-drv-net-improve-the-queue-test-for-xsk'Jakub Kicinski
Jakub Kicinski says: ==================== selftests: drv-net: improve the queue test for XSK We see some flakes in the the XSK test: Exception| Traceback (most recent call last): Exception| File "/home/virtme/testing-18/tools/testing/selftests/net/lib/py/ksft.py", line 218, in ksft_run Exception| case(*args) Exception| File "/home/virtme/testing-18/tools/testing/selftests/drivers/net/./queues.py", line 53, in check_xdp Exception| ksft_eq(q['xsk'], {}) Exception| KeyError: 'xsk' I think it's because the method of running the helper in the background is racy. Add more solid infra for waiting for a background helper to be initialized. v1: https://lore.kernel.org/20250218195048.74692-1-kuba@kernel.org ==================== Link: https://patch.msgid.link/20250219234956.520599-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20selftests: drv-net: rename queues check_xdp to check_xskJakub Kicinski
The test is for AF_XDP, we refer to AF_XDP as XSK. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Joe Damato <jdamato@fastly.com> Tested-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250219234956.520599-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20selftests: drv-net: improve the use of ksft helpers in XSK queue testJakub Kicinski
Avoid exceptions when xsk attr is not present, and add a proper ksft helper for "not in" condition. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Joe Damato <jdamato@fastly.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250219234956.520599-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20selftests: drv-net: add a way to wait for a local processJakub Kicinski
We use wait_port_listen() extensively to wait for a process we spawned to be ready. Not all processes will open listening sockets. Add a method of explicitly waiting for a child to be ready. Pass a FD to the spawned process and wait for it to write a message to us. FD number is passed via KSFT_READY_FD env variable. Similarly use KSFT_WAIT_FD to let the child process for a sign that we are done and child should exit. Sending a signal to a child with shell=True can get tricky. Make use of this method in the queues test to make it less flaky. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Joe Damato <jdamato@fastly.com> Tested-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250219234956.520599-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20selftests: drv-net: probe for AF_XDP sockets more explicitlyJakub Kicinski
Separate the support check from socket binding for easier refactoring. Use: ./helper - - just to probe if we can open the socket. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Joe Damato <jdamato@fastly.com> Tested-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250219234956.520599-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20selftests: drv-net: add missing new line in xdp_helperJakub Kicinski
Kurt and Joe report missing new line at the end of Usage. Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Joe Damato <jdamato@fastly.com> Tested-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250219234956.520599-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20selftests: drv-net: use cfg.rpath() in netlink xsk attr testJakub Kicinski
The cfg.rpath() helper was been recently added to make formatting paths for helper binaries easier. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Joe Damato <jdamato@fastly.com> Tested-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250219234956.520599-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20selftests: drv-net: add a warning for bkg + shell + terminateJakub Kicinski
Joe Damato reports that some shells will fork before running the command when python does "sh -c $cmd", while bash on my machine does an exec of $cmd directly. This will have implications for our ability to terminate the child process on various configurations of bash and other shells. Warn about using bkg(... shell=True, termininate=True) most background commands can hopefully exit cleanly (exit_wait). Link: https://lore.kernel.org/Z7Yld21sv_Ip3gQx@LQ3V64L9R2 Acked-by: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Joe Damato <jdamato@fastly.com> Tested-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250219234956.520599-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21wifi: rtw89: fw: safely cast mfw_hdr pointer from firmware->dataPing-Ke Shih
Check size of struct mfw_hdr within firmware->size before type casting to ensure to validly dereference fields from mfm_hdr pointer. Then, check if signature field is equal to RTW89_MFW_SIG to assert current is multi-firmware. Addresses-Coverity-ID: 1494046 ("Untrusted loop bound") Addresses-Coverity-ID: 1544385 ("Untrusted array index read") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217064308.43559-6-pkshih@realtek.com
2025-02-21wifi: rtw89: fw: add debug message for unexpected secure firmwarePing-Ke Shih
If failed to load a non-secure firmware with a secure chip, it only throws a unclear message: rtw89_8922ae 0000:03:00.0: parse fw header fail To address this case simpler, add a message to point out this. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217064308.43559-5-pkshih@realtek.com
2025-02-21wifi: rtw89: fw: propagate error code from rtw89_h2c_tx()Ping-Ke Shih
The error code should be propagated to callers during downloading firmware header and body. Remove unnecessary assignment of -1. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217064308.43559-4-pkshih@realtek.com
2025-02-21wifi: rtw89: fw: get sb_sel_ver via get_unaligned_le32()Ping-Ke Shih
The sb_sel_ver is selection version for secure boot recorded in firmware binary data, and its size is 4 and offset is 58 (not natural alignment). Use get_unaligned_le32() to get this value safely. Find this by reviewing. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217064308.43559-3-pkshih@realtek.com
2025-02-21wifi: rtw89: fw: add blacklist to avoid obsolete secure firmwarePing-Ke Shih
To ensure secure chip only runs expected secure firmware, stop using obsolete firmware in blacklist which weakness or flaw was found. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217064308.43559-2-pkshih@realtek.com
2025-02-21wifi: rtw89: add H2C command of TX time for WiFi 7 chipsPing-Ke Shih
BT-coexistence configure WiFi TX time to share time slots with Bluetooth devices. Since the format is different from WiFi 6 chips, add the new format accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217063053.38936-3-pkshih@realtek.com
2025-02-21wifi: rtw89: mac: define registers of agg_limit and txcnt_limit to share ↵Ping-Ke Shih
common flow The agg_limit and txcnt_limit are used by BT-coexistence to reduce WiFi TX time at once to share time with Bluetooth devices. Since these registers address are different from WiFi 6 and 7 chips, define them accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217063053.38936-2-pkshih@realtek.com
2025-02-20octeontx2: hide unused labelArnd Bergmann
A previous patch introduces a build-time warning when CONFIG_DCB is disabled: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c: In function 'otx2_probe': drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:3217:1: error: label 'err_free_zc_bmap' defined but not used [-Werror=unused-label] drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c: In function 'otx2vf_probe': drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c:740:1: error: label 'err_free_zc_bmap' defined but not used [-Werror=unused-label] Add the same #ifdef check around it. Fixes: efabce290151 ("octeontx2-pf: AF_XDP zero copy receive support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Suman Ghosh <sumang@marvell.com> Link: https://patch.msgid.link/20250219162239.1376865-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net: phy: qt2025: Fix hardware revision check commentCharalampos Mitrodimas
Correct the hardware revision check comment in the QT2025 driver. The revision value was documented as 0x3b instead of the correct 0xb3, which matches the actual comparison logic in the code. Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Trevor Gross <tmgross@umich.edu> Link: https://patch.msgid.link/20250219-qt2025-comment-fix-v2-1-029f67696516@posteo.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21wifi: rtw89: 8922a: fix incorrect STA-ID in EHT MU PPDUKuan-Chung Chen
EHT MU PPDU contains user field of EHT-SIG field with STA-ID that must match AID subfield in the Associate Response. Add a necessary setting to prevent these from being inconsistent. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250217061235.32031-1-pkshih@realtek.com
2025-02-20Merge branch 'mlx5-misc-enhancements-2025-02-19'Jakub Kicinski
Tariq Toukan says: ==================== mlx5 misc enhancements 2025-02-19 This small series enhances the mlx5 ethtool link speed code (no functional change), in addition to a Kconfig description enhancement. ==================== Link: https://patch.msgid.link/20250219114112.403808-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net/mlx5e: Separate extended link modes request from link modes type selectionShahar Shitrit
The function ext_requested() serves two distinct purposes: it checks if extended link modes were requested, and it selects whether to use extended or legacy link modes. This change separates these two purposes. Now, ext_link_mode_requested() is used directly for checking if extended link modes are requested, while the selection of extended modes is handled independently based on the autonegotiation status. By making this distinction, the logic for determining whether to select extended or legacy link modes is clearer. Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250219114112.403808-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net/mlx5e: Change eth_proto parameter namingShahar Shitrit
eth_proto_cap parameter represents the supported link modes, while eth_proto_admin refers to the configured ones. The function get_advertising() retrieves the configured link modes, thus we update its parameter name to eth_proto_admin. Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250219114112.403808-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net/mlx5e: Introduce ptys2ethtool_process_link()Shahar Shitrit
The functions ptys2ethtool_supported_link(), ptys2ethtool_adver_link() share the same code, thus, in order to remove code duplication we introduce a new function ptys2ethtool_process_link() to handle the processing of both supported and advertised link modes. Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250219114112.403808-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net/mlx5e: Refactor ptys2ethtool_adver_link()Shahar Shitrit
The function ptys2ethtool_adver_link() contains duplicated code that is found in mlx5e_ethtool_get_speed_arr(). To eliminate this redundancy, we update mlx5e_ethtool_get_speed_arr() to select the appropriate table based on the ext argument passed by the caller, rather than querying the supported mode locally. This allows us to replace the current logic in ptys2ethtool_adver_link() with a call to mlx5e_ethtool_get_speed_arr(). This adjustment aligns with the ptys2ethtool_supported_link() function and prepares for an upcoming patch that reduces code duplication. Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250219114112.403808-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net/mlx5: Bridge, correct config option descriptionCosmin Ratiu
The implication of the previous help text was that without this option enabled, representor devices couldn't be added to a bridge device, while in fact that was possible, just that rules didn't get offloaded to hw. This commit clarifies the help text. Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250219114112.403808-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21wifi: rtw89: rtw8852b{t}: fix TSSI debug timestampsDmitry Antipov
Since the vendor driver is claimed to measure 'tssi_alimk_time' of 'struct rtw89_tssi_info' in microseconds, adjust rtw8852b{t}-specific '_tssi_alimentk()' to not mess the former with nanoseconds and print both per-call and accumulated times. Compile tested only. Fixes: 7f18a70d7b4d ("wifi: rtw89: 8852b: rfk: add TSSI") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250213095006.1308810-1-dmantipov@yandex.ru
2025-02-20neighbour: Replace kvzalloc() with kzalloc() when GFP_ATOMIC is specifiedKohei Enju
kzalloc() uses page allocator when size is larger than KMALLOC_MAX_CACHE_SIZE, so the intention of commit ab101c553bc1 ("neighbour: use kvzalloc()/kvfree()") can be achieved by using kzalloc(). When using GFP_ATOMIC, kvzalloc() only tries the kmalloc path, since the vmalloc path does not support the flag. In this case, kvzalloc() is equivalent to kzalloc() in that neither try the vmalloc path, so this replacement brings no functional change. This is primarily a cleanup change, as the original code functions correctly. This patch replaces kvzalloc() introduced by commit 41b3caa7c076 ("neighbour: Add hlist_node to struct neighbour"), which is called in the same context and with the same gfp flag as the aforementioned commit ab101c553bc1 ("neighbour: use kvzalloc()/kvfree()"). Signed-off-by: Kohei Enju <enjuk@amazon.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Link: https://patch.msgid.link/20250219102227.72488-1-enjuk@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20Merge branch 'some-pktgen-fixes-improvments-part-i'Jakub Kicinski
Peter Seiderer says: ==================== Some pktgen fixes/improvments (part I) While taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@red-soft.ru/ [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76201b5979768500bca362871db66d77cb4c225e ==================== Link: https://patch.msgid.link/20250219084527.20488-1-ps.report@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net: pktgen: fix access outside of user given buffer in pktgen_thread_write()Peter Seiderer
Honour the user given buffer size for the strn_len() calls (otherwise strn_len() will access memory outside of the user given buffer). Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250219084527.20488-8-ps.report@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net: pktgen: fix ctrl interface command parsingPeter Seiderer
Enable command writing without trailing '\n': - the good case $ echo "reset" > /proc/net/pktgen/pgctrl - the bad case (before the patch) $ echo -n "reset" > /proc/net/pktgen/pgctrl -bash: echo: write error: Invalid argument - with patch applied $ echo -n "reset" > /proc/net/pktgen/pgctrl Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250219084527.20488-7-ps.report@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net: pktgen: fix 'ratep 0' error handling (return -EINVAL)Peter Seiderer
Given an invalid 'ratep' command e.g. 'ratep 0' the return value is '1', leading to the following misleading output: - the good case $ echo "ratep 100" > /proc/net/pktgen/lo\@0 $ grep "Result:" /proc/net/pktgen/lo\@0 Result: OK: ratep=100 - the bad case (before the patch) $ echo "ratep 0" > /proc/net/pktgen/lo\@0" -bash: echo: write error: Invalid argument $ grep "Result:" /proc/net/pktgen/lo\@0 Result: No such parameter "atep" - with patch applied $ echo "ratep 0" > /proc/net/pktgen/lo\@0 -bash: echo: write error: Invalid argument $ grep "Result:" /proc/net/pktgen/lo\@0 Result: Idle Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250219084527.20488-6-ps.report@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net: pktgen: fix 'rate 0' error handling (return -EINVAL)Peter Seiderer
Given an invalid 'rate' command e.g. 'rate 0' the return value is '1', leading to the following misleading output: - the good case $ echo "rate 100" > /proc/net/pktgen/lo\@0 $ grep "Result:" /proc/net/pktgen/lo\@0 Result: OK: rate=100 - the bad case (before the patch) $ echo "rate 0" > /proc/net/pktgen/lo\@0" -bash: echo: write error: Invalid argument $ grep "Result:" /proc/net/pktgen/lo\@0 Result: No such parameter "ate" - with patch applied $ echo "rate 0" > /proc/net/pktgen/lo\@0 -bash: echo: write error: Invalid argument $ grep "Result:" /proc/net/pktgen/lo\@0 Result: Idle Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250219084527.20488-5-ps.report@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net: pktgen: fix hex32_arg parsing for short readsPeter Seiderer
Fix hex32_arg parsing for short reads (here 7 hex digits instead of the expected 8), shift result only on successful input parsing. - before the patch $ echo "mpls 0000123" > /proc/net/pktgen/lo\@0 $ grep mpls /proc/net/pktgen/lo\@0 mpls: 00001230 Result: OK: mpls=00001230 - with patch applied $ echo "mpls 0000123" > /proc/net/pktgen/lo\@0 $ grep mpls /proc/net/pktgen/lo\@0 mpls: 00000123 Result: OK: mpls=00000123 Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250219084527.20488-4-ps.report@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net: pktgen: enable 'param=value' parsingPeter Seiderer
Enable more flexible parameters syntax, allowing 'param=value' in addition to the already supported 'param value' pattern (additional this gives the skipping '=' in count_trail_chars() a purpose). Tested with: $ echo "min_pkt_size 999" > /proc/net/pktgen/lo\@0 $ echo "min_pkt_size=999" > /proc/net/pktgen/lo\@0 $ echo "min_pkt_size =999" > /proc/net/pktgen/lo\@0 $ echo "min_pkt_size= 999" > /proc/net/pktgen/lo\@0 $ echo "min_pkt_size = 999" > /proc/net/pktgen/lo\@0 Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250219084527.20488-3-ps.report@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net: pktgen: replace ENOTSUPP with EOPNOTSUPPPeter Seiderer
Replace ENOTSUPP with EOPNOTSUPP, fixes checkpatch hint WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP and e.g. $ echo "clone_skb 1" > /proc/net/pktgen/lo\@0 -bash: echo: write error: Unknown error 524 Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250219084527.20488-2-ps.report@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21wifi: rtw88: Add support for Mercusys MA30N and D-Link DWA-T185 rev. A1Zenm Chen
Add two more USB IDs found in https://github.com/RinCat/RTL88x2BU-Linux-Driver to support Mercusys MA30N and D-Link DWA-T185 rev. A1. Signed-off-by: Zenm Chen <zenmchen@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250210073610.4174-1-zenmchen@gmail.com
2025-02-20net: stmmac: dwmac-loongson: Add fix_soc_reset() callbackQunqin Zhao
Loongson's DWMAC device may take nearly two seconds to complete DMA reset, however, the default waiting time for reset is 200 milliseconds. Therefore, the following error message may appear: [14.427169] dwmac-loongson-pci 0000:00:03.2: Failed to reset the dma Fixes: 803fc61df261 ("net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support") Cc: stable@vger.kernel.org Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Yanteng Si <si.yanteng@linux.dev> Link: https://patch.msgid.link/20250219020701.15139-1-zhaoqunqin@loongson.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge tag 'drm-msm-fixes-2025-02-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.14-rc4 Display: * More catalog fixes: - to skip watchdog programming through top block if its not present - fix the setting of WB mask to ensure the WB input control is programmed correctly through ping-pong - drop lm_pair for sm6150 as that chipset does not have any 3dmerge block * Fix the mode validation logic for DP/eDP to account for widebus (2ppc) to allow high clock resolutions * Fix to disable dither during encoder disable as otherwise this was causing kms_writeback failure due to resource sharing between * WB and DSI paths as DSI uses dither but WB does not * Fixes for virtual planes, namely to drop extraneous return and fix uninitialized variables * Fix to avoid spill-over of DSC encoder block bits when programming the bits-per-component * Fixes in the DSI PHY to protect against concurrent access of PHY_CMN_CLK_CFG regs between clock and display drivers Core/GPU: * Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout * Only print GMU fw version once, instead of each time the GPU resumes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtt2AODBXdod8ULXcAygf_qYvwRDVeUVtODx=2jErp6cA@mail.gmail.com
2025-02-21Merge tag 'drm-intel-fixes-2025-02-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - Use spin_lock_irqsave() in interruptible context on guc submission (Krzysztof) - Fixes on DDI and TRANS programming (Imre) - Make sure all planes in use by the joiner have their crtc included (Ville) - Fix 128b/132b modeset issues (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z7dgcUG_hvityvHn@intel.com
2025-02-20Merge tag 'nvme-6.14-2025-02-20' of git://git.infradead.org/nvme into block-6.14Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.14 - FC controller state check fixes (Daniel) - PCI Endpoint fixes (Damien) - TCP connection failure fixe (Caleb) - TCP handling C2HTermReq PDU (Maurizio) - RDMA queue state check (Ruozhu) - Apple controller fixes (Hector) - Target crash on disbaled namespace (Hannes)" * tag 'nvme-6.14-2025-02-20' of git://git.infradead.org/nvme: nvme: only allow entering LIVE from CONNECTING state nvme-fc: rely on state transitions to handle connectivity loss apple-nvme: Support coprocessors left idle apple-nvme: Release power domains when probe fails nvmet: Use enum definitions instead of hardcoded values nvme: Cleanup the definition of the controller config register fields nvme/ioctl: add missing space in err message nvme-tcp: fix connect failure on receiving partial ICResp PDU nvme: tcp: Fix compilation warning with W=1 nvmet: pci-epf: Avoid RCU stalls under heavy workload nvmet: pci-epf: Do not uselessly write the CSTS register nvmet: pci-epf: Correctly initialize CSTS when enabling the controller nvmet-rdma: recheck queue state is LIVE in state lock in recv done nvmet: Fix crash when a namespace is disabled nvme-tcp: add basic support for the C2HTermReq PDU nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
2025-02-21Merge tag 'drm-xe-fixes-2025-02-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - Fix error handling in xe_irq_install (Lucas) - Fix devcoredump format (Jose, Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z7dePS3a9POnjrVL@intel.com
2025-02-20Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfLinus Torvalds
Pull BPF fixes from Daniel Borkmann: - Fix a soft-lockup in BPF arena_map_free on 64k page size kernels (Alan Maguire) - Fix a missing allocation failure check in BPF verifier's acquire_lock_state (Kumar Kartikeya Dwivedi) - Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima) - Fix a deadlock when freeing BPF cgroup storage (Abel Wu) - Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex (Andrii Nakryiko) - Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is accessing skb data not containing an Ethernet header (Shigeru Yoshida) - Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai) - Several BPF sockmap fixes to address incorrect TCP copied_seq calculations, which prevented correct data reads from recv(2) in user space (Jiayuan Chen) - Two fixes for BPF map lookup nullness elision (Daniel Xu) - Fix a NULL-pointer dereference from vmlinux BTF lookup in bpf_sk_storage_tracing_allowed (Jared Kangas) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests: bpf: test batch lookup on array of maps with holes bpf: skip non exist keys in generic_map_lookup_batch bpf: Handle allocation failure in acquire_lock_state bpf: verifier: Disambiguate get_constant_map_key() errors bpf: selftests: Test constant key extraction on irrelevant maps bpf: verifier: Do not extract constant map keys for irrelevant maps bpf: Fix softlockup in arena_map_free on 64k page kernel net: Add rx_skb of kfree_skb to raw_tp_null_args[]. bpf: Fix deadlock when freeing cgroup storage selftests/bpf: Add strparser test for bpf selftests/bpf: Fix invalid flag of recv() bpf: Disable non stream socket for strparser bpf: Fix wrong copied_seq calculation strparser: Add read_sock callback bpf: avoid holding freeze_mutex during mmap operation bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic selftests/bpf: Adjust data size to have ETH_HLEN bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type() bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
2025-02-20af_unix: Fix undefined 'other' errorPurva Yeshi
Fix an issue with the sparse static analysis tool where an "undefined 'other'" error occurs due to `__releases(&unix_sk(other)->lock)` being placed before 'other' is in scope. Remove the `__releases()` annotation from the `unix_wait_for_peer()` function to eliminate the sparse error. The annotation references `other` before it is declared, leading to a false positive error during static analysis. Since AF_UNIX does not use sparse annotations, this annotation is unnecessary and does not impact functionality. Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250218141045.38947-1-purvayeshi550@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20MAINTAINERS: Change maintainer for RDTFenghua Yu
Due to job transition, I am stepping down as RDT maintainer. Add Tony as a co-maintainer. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20250131190731.3981085-1-fenghua.yu%40intel.com
2025-02-21Merge tag 'drm-misc-fixes-2025-02-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes An reset signal polarity fix for the jd9365da-h3 panel, a folio handling fix and config fix in nouveau, a dmem cgroup descendant pool handling fix, and a missing header for amdxdna. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250220-glorious-cockle-of-might-5b35f7@houat
generated by cgit (git 2.34.1) at 2025-09-19 15:01:33 +0000