| Age | Commit message (Collapse) | Author |
|---|
|
Pull remoteproc fix from Bjorn Andersson:
"This fixes a Kbuild dependency issue related to the Qualcomm
remoteproc drivers"
* tag 'rproc-v4.11-fixes' of git://github.com/andersson/remoteproc:
remoteproc: qcom: fix QCOM_SMD dependencies
|
|
The vpe_mask member of struct core_boot_config is of type atomic_t,
which is a 32bit type. In cps-vec.S this member was being retrieved by a
PTR_L macro, which on 64bit systems is a 64bit load. On little endian
systems this is OK, since the double word that is retrieved will have
the required less significant word in the correct position. However, on
big endian systems the less significant word of the load is retrieved
from address+4, and the more significant from address+0. The destination
register therefore ends up with the required word in the more
significant word
e.g. when starting the second VP of a big endian 64bit system, the load
PTR_L ta2, COREBOOTCFG_VPEMASK(a0)
ends up setting register ta2 to 0x0000000300000000
When this value is written to the CPC it is ignored, since it is
invalid to write anything larger than 4 bits. This results in any VP
other than VP0 in a core failing to start in 64bit big endian systems.
Change the load to a 32bit load word instruction to fix the bug.
Fixes: f12401d7219f ("MIPS: smp-cps: Pull boot config retrieval out of mips_cps_boot_vpes")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15787/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
- fix performance regression reported by lkp-rebot
- fix potential data lost after power-cut due to SSR reallocation
* tag 'for-f2fs-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: combine nat_bits and free_nid_bitmap cache
f2fs: skip scanning free nid bitmap of full NAT blocks
f2fs: use __set{__clear}_bit_le
f2fs: declare static functions
f2fs: don't overwrite node block by SSR
|
|
The intent of the original warning is make sure that the mdev vendor
driver has removed any group notifiers at the point where the group
is closed by the user. Theoretically this would be through an
orderly shutdown where any devices are release prior to the group
release. We can't always count on an orderly shutdown, the user can
close the group before the notifier can be removed or the user task
might be killed. We'd like to add this sanity test when the group is
idle and the only references are from the devices within the group
themselves, but we don't have a good way to do that. Instead check
both when the group itself is removed and when the group is opened.
A bit later than we'd prefer, but better than the current over
aggressive approach.
Fixes: ccd46dbae77d ("vfio: support notifier chain in vfio_group")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: <stable@vger.kernel.org> # v4.10
Cc: Jike Song <jike.song@intel.com>
|
|
Hook up three pkey syscalls (which we don't implement) and the new statx
syscall, as has been done for arch/arm/.
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When building the kernel with clang, the compiler complains about the
presence of a condition inside two pairs of parentheses:
scripts/kconfig/gconf.c:917:19: error: equality comparison with
extraneous parentheses [-Werror,-Wparentheses-equality]
} else if ((col == COL_OPTION)) {
~~~~^~~~~~~~~~~~~
scripts/kconfig/gconf.c:917:19: note: remove extraneous parentheses
around the comparison to silence this warning
} else if ((col == COL_OPTION)) {
~ ^ ~
scripts/kconfig/gconf.c:917:19: note: use '=' to turn this equality
comparison into an assignment
} else if ((col == COL_OPTION)) {
^~
=
Silence this warning by removing a level of parentheses.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The latest change of asm goto support check added passing of KBUILD_CFLAGS
to compiler. When these flags reference gcc plugins that are not built yet,
the check fails.
When one runs "make bzImage" followed by "make modules", the kernel is always
built with HAVE_JUMP_LABEL disabled, while the modules are built depending on
CONFIG_JUMP_LABEL. If HAVE_JUMP_LABEL macro happens to be different, modules
are built with undefined references, e.g.:
ERROR: "static_key_slow_inc" [net/netfilter/xt_TEE.ko] undefined!
ERROR: "static_key_slow_dec" [net/netfilter/xt_TEE.ko] undefined!
ERROR: "static_key_slow_dec" [net/netfilter/nft_meta.ko] undefined!
ERROR: "static_key_slow_inc" [net/netfilter/nft_meta.ko] undefined!
ERROR: "nf_hooks_needed" [net/netfilter/ipvs/ip_vs.ko] undefined!
ERROR: "nf_hooks_needed" [net/ipv6/ipv6.ko] undefined!
ERROR: "static_key_count" [net/ipv6/ipv6.ko] undefined!
ERROR: "static_key_slow_inc" [net/ipv6/ipv6.ko] undefined!
This change moves the check before all these references are added
to KBUILD_CFLAGS. This is correct because subsequent KBUILD_CFLAGS
modifications are not relevant to this check.
Reported-by: Anton V. Boyarshinov <boyarsh@altlinux.org>
Fixes: 35f860f9ba6a ("jump label: pass kbuild_cflags when checking for asm goto support")
Cc: stable@vger.kernel.org # v4.10
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: David Lin <dtwlin@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
When RESET_CONTROLLER is not enabled, the optional reset_control_get
stubs should now also return NULL.
Since it is now valid for reset_control_assert/deassert/reset/status/put
to be called unconditionally, with NULL as an argument for optional
resets, the stubs are not allowed to warn anymore.
Fixes: bb475230b8e5 ("reset: make optional functions really optional")
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Sagi writes:
This consists of some fixes for issues reported lately:
- loop and rdma host driver cpu hotplug fixes
- fix loop use-after-free
- nvmet percpu_ref confirmation fix to fail ongoing requests
- nvmet-rdma fix a non-initialized commands deref
|
|
If a cpu unplug event has occured, we need to take the minimum
of the provided nr_io_queues and the number of online cpus,
otherwise we won't be able to connect them as blk-mq mapping
won't dispatch to those queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
If a cpu unplug event has occured, we need to take the minimum
of the provided nr_io_queues and the number of online cpus,
otherwise we won't be able to connect them as blk-mq mapping
won't dispatch to those queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
kprobes test cases need to have a stack that is aligned to an 8-byte
boundary because they call other functions (and the ARM ABI mandates
that alignment) and because test cases include 64-bit accesses to the
stack. Unfortunately, GCC doesn't ensure this alignment for inline
assembler and for the code in question seems to always misalign it by
pushing just the LR register onto the stack. We therefore need to
explicitly perform stack alignment at the start of each test case.
Without this fix, some test cases will generate alignment faults on
systems where alignment is enforced. Even if the kernel is configured to
handle these faults in software, triggering them is ugly. It also
exposes limitations in the fault handling code which doesn't cope with
writes to the stack. E.g. when handling this instruction
strd r6, [sp, #-64]!
the fault handling code will write to a stack location below the SP
value at the point the fault occurred, which coincides with where the
exception handler has pushed the saved register context. This results in
corruption of those registers.
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
This is arm port of commit 737480a0d525 ("kprobes/x86:
Fix the return address of multiple kretprobes").
Fix the return address of subsequent kretprobes when multiple
kretprobes are set on the same function.
For example:
# cd /sys/kernel/debug/tracing
# echo "r:event1 sys_symlink" > kprobe_events
# echo "r:event2 sys_symlink" >> kprobe_events
# echo 1 > events/kprobes/enable
# ln -s /tmp/foo /tmp/bar
(without this patch)
# cat trace | grep -v ^#
ln-82 [000] dn.2 68.446525: event1: (kretprobe_trampoline+0x0/0x18 <- SyS_symlink)
ln-82 [000] dn.2 68.447831: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)
(with this patch)
# cat trace | grep -v ^#
ln-81 [000] dn.1 39.463469: event1: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)
ln-81 [000] dn.1 39.464701: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: KUMANO Syuhei <kumano.prog@gmail.com>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
Kprobes/arm skips single-stepping (moreover handling the event)
if the conditional instruction must not be executed. This
also apply the rule when we hit the recursing kprobe, so
that kprobe does not count nmissed up in that case.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
This is arm port of commit 6a5022a56ac3 ("kprobes/x86: Allow to
handle reentered kprobe on single-stepping")
Since the FIQ handlers can interrupt in the single stepping
(or preparing the single stepping, do_debug etc.), we should
consider a kprobe is hit in the NMI handler. Even in that
case, the kprobe is allowed to be reentered as same as the
kprobes hit in kprobe handlers
(KPROBE_HIT_ACTIVE or KPROBE_HIT_SSDONE).
The real issue will happen when a kprobe hit while another
reentered kprobe is processing (KPROBE_REENTER), because
we already consumed a saved-area for the previous kprobe.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
|
|
When releasing the bus, let's clear the bus pointers to mark it out. If
any further device unregister happens on this bus, we know that we're
done if we found the bus being released already.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
What started as a rather straightforward race condition reported by
Dmitry using the syzkaller fuzzer ended up revealing some major
problems with how the audit subsystem managed its netlink sockets and
its connection with the userspace audit daemon. Fixing this properly
had quite the cascading effect and what we are left with is this rather
large and complicated patch. My initial goal was to try and decompose
this patch into multiple smaller patches, but the way these changes
are intertwined makes it difficult to split these changes into
meaningful pieces that don't break or somehow make things worse for
the intermediate states.
The patch makes a number of changes, but the most significant are
highlighted below:
* The auditd tracking variables, e.g. audit_sock, are now gone and
replaced by a RCU/spin_lock protected variable auditd_conn which is
a structure containing all of the auditd tracking information.
* We no longer track the auditd sock directly, instead we track it
via the network namespace in which it resides and we use the audit
socket associated with that namespace. In spirit, this is what the
code was trying to do prior to this patch (at least I think that is
what the original authors intended), but it was done rather poorly
and added a layer of obfuscation that only masked the underlying
problems.
* Big backlog queue cleanup, again. In v4.10 we made some pretty big
changes to how the audit backlog queues work, here we haven't changed
the queue design so much as cleaned up the implementation. Brought
about by the locking changes, we've simplified kauditd_thread() quite
a bit by consolidating the queue handling into a new helper function,
kauditd_send_queue(), which allows us to eliminate a lot of very
similar code and makes the looping logic in kauditd_thread() clearer.
* All netlink messages sent to auditd are now sent via
auditd_send_unicast_skb(). Other than just making sense, this makes
the lock handling easier.
* Change the audit_log_start() sleep behavior so that we never sleep
on auditd events (unchanged) or if the caller is holding the
audit_cmd_mutex (changed). Previously we didn't sleep if the caller
was auditd or if the message type fell between a certain range; the
type check was a poor effort of doing what the cmd_mutex check now
does. Richard Guy Briggs originally proposed not sleeping the
cmd_mutex owner several years ago but his patch wasn't acceptable
at the time. At least the idea lives on here.
* A problem with the lost record counter has been resolved. Steve
Grubb and I both happened to notice this problem and according to
some quick testing by Steve, this problem goes back quite some time.
It's largely a harmless problem, although it may have left some
careful sysadmins quite puzzled.
Cc: <stable@vger.kernel.org> # 4.10.x-
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
GVTg has introduced the context status notifier to schedule the GVTg
workload. At that time, the notifier is bound to GVTg context only,
so GVTg is not aware of host workloads.
Now we are going to improve GVTg's guest workload scheduler policy,
and add Guc emulation support for new Gen graphics. Both these two
features require acknowledgment for all contexts running on hardware.
(But will not alter host workload.) So here try to make some change.
The change is simple:
1. Move the context status notifier head from i915_gem_context to
intel_engine_cs. Which means there is a notifier head per engine
instead of per context. Execlist driver still call notifier for
each context sched-in/out events of current engine.
2. At GVTg side, it binds a notifier_block for each physical engine
at GVTg initialization period. Then GVTg can hear all context
status events.
In this patch, GVTg do nothing for host context event, but later
will add a function there. But in any case, the notifier callback is
a noop if this is no active vGPU.
Since intel_gvt_init() is called at early initialization stage and
require the status notifier head has been initiated, I initiate it in
intel_engine_setup().
v2: remove a redundant newline. (chris)
Fixes: 3c7ba6359d70 ("drm/i915: Introduce execlist context status change notification")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100232
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313024711.28591-1-changbin.du@intel.com
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 3fc03069bc6e6c316f19bb526e3c8ce784677477)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321144720.17020-1-chris@chris-wilson.co.uk
|
|
The rcu_barrier() takes the cpu_hotplug mutex which itself is not
reclaim-safe, and so rcu_barrier() is illegal from inside the shrinker.
[ 309.661373] =========================================================
[ 309.661376] [ INFO: possible irq lock inversion dependency detected ]
[ 309.661380] 4.11.0-rc1-CI-CI_DRM_2333+ #1 Tainted: G W
[ 309.661383] ---------------------------------------------------------
[ 309.661386] gem_exec_gttfil/6435 just changed the state of lock:
[ 309.661389] (rcu_preempt_state.barrier_mutex){+.+.-.}, at: [<ffffffff81100731>] _rcu_barrier+0x31/0x160
[ 309.661399] but this lock took another, RECLAIM_FS-unsafe lock in the past:
[ 309.661402] (cpu_hotplug.lock){+.+.+.}
[ 309.661404]
and interrupts could create inverse lock ordering between them.
[ 309.661410]
other info that might help us debug this:
[ 309.661414] Possible interrupt unsafe locking scenario:
[ 309.661417] CPU0 CPU1
[ 309.661419] ---- ----
[ 309.661421] lock(cpu_hotplug.lock);
[ 309.661425] local_irq_disable();
[ 309.661432] lock(rcu_preempt_state.barrier_mutex);
[ 309.661441] lock(cpu_hotplug.lock);
[ 309.661446] <Interrupt>
[ 309.661448] lock(rcu_preempt_state.barrier_mutex);
[ 309.661453]
*** DEADLOCK ***
[ 309.661460] 4 locks held by gem_exec_gttfil/6435:
[ 309.661464] #0: (sb_writers#10){.+.+.+}, at: [<ffffffff8120d83d>] vfs_write+0x17d/0x1f0
[ 309.661475] #1: (debugfs_srcu){......}, at: [<ffffffff81320491>] debugfs_use_file_start+0x41/0xa0
[ 309.661486] #2: (&attr->mutex){+.+.+.}, at: [<ffffffff8123a3e7>] simple_attr_write+0x37/0xe0
[ 309.661495] #3: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0091b4a>] i915_drop_caches_set+0x3a/0x150 [i915]
[ 309.661540]
the shortest dependencies between 2nd lock and 1st lock:
[ 309.661547] -> (cpu_hotplug.lock){+.+.+.} ops: 829 {
[ 309.661553] HARDIRQ-ON-W at:
[ 309.661560] __lock_acquire+0x5e5/0x1b50
[ 309.661565] lock_acquire+0xc9/0x220
[ 309.661572] __mutex_lock+0x6e/0x990
[ 309.661576] mutex_lock_nested+0x16/0x20
[ 309.661583] get_online_cpus+0x61/0x80
[ 309.661590] kmem_cache_create+0x25/0x1d0
[ 309.661596] debug_objects_mem_init+0x30/0x249
[ 309.661602] start_kernel+0x341/0x3fe
[ 309.661607] x86_64_start_reservations+0x2a/0x2c
[ 309.661612] x86_64_start_kernel+0x173/0x186
[ 309.661619] verify_cpu+0x0/0xfc
[ 309.661622] SOFTIRQ-ON-W at:
[ 309.661627] __lock_acquire+0x611/0x1b50
[ 309.661632] lock_acquire+0xc9/0x220
[ 309.661636] __mutex_lock+0x6e/0x990
[ 309.661641] mutex_lock_nested+0x16/0x20
[ 309.661646] get_online_cpus+0x61/0x80
[ 309.661650] kmem_cache_create+0x25/0x1d0
[ 309.661655] debug_objects_mem_init+0x30/0x249
[ 309.661660] start_kernel+0x341/0x3fe
[ 309.661664] x86_64_start_reservations+0x2a/0x2c
[ 309.661669] x86_64_start_kernel+0x173/0x186
[ 309.661674] verify_cpu+0x0/0xfc
[ 309.661677] RECLAIM_FS-ON-W at:
[ 309.661682] mark_held_locks+0x6f/0xa0
[ 309.661687] lockdep_trace_alloc+0xb3/0x100
[ 309.661693] kmem_cache_alloc_trace+0x31/0x2e0
[ 309.661699] __smpboot_create_thread.part.1+0x27/0xe0
[ 309.661704] smpboot_create_threads+0x61/0x90
[ 309.661709] cpuhp_invoke_callback+0x9c/0x8a0
[ 309.661713] cpuhp_up_callbacks+0x31/0xb0
[ 309.661718] _cpu_up+0x7a/0xc0
[ 309.661723] do_cpu_up+0x5f/0x80
[ 309.661727] cpu_up+0xe/0x10
[ 309.661734] smp_init+0x71/0xb3
[ 309.661738] kernel_init_freeable+0x94/0x19e
[ 309.661743] kernel_init+0x9/0xf0
[ 309.661748] ret_from_fork+0x2e/0x40
[ 309.661752] INITIAL USE at:
[ 309.661757] __lock_acquire+0x234/0x1b50
[ 309.661761] lock_acquire+0xc9/0x220
[ 309.661766] __mutex_lock+0x6e/0x990
[ 309.661771] mutex_lock_nested+0x16/0x20
[ 309.661775] get_online_cpus+0x61/0x80
[ 309.661780] __cpuhp_setup_state+0x44/0x170
[ 309.661785] page_alloc_init+0x23/0x3a
[ 309.661790] start_kernel+0x124/0x3fe
[ 309.661794] x86_64_start_reservations+0x2a/0x2c
[ 309.661799] x86_64_start_kernel+0x173/0x186
[ 309.661804] verify_cpu+0x0/0xfc
[ 309.661807] }
[ 309.661813] ... key at: [<ffffffff81e37690>] cpu_hotplug+0xb0/0x100
[ 309.661817] ... acquired at:
[ 309.661821] lock_acquire+0xc9/0x220
[ 309.661825] __mutex_lock+0x6e/0x990
[ 309.661829] mutex_lock_nested+0x16/0x20
[ 309.661833] get_online_cpus+0x61/0x80
[ 309.661837] _rcu_barrier+0x9f/0x160
[ 309.661841] rcu_barrier+0x10/0x20
[ 309.661847] netdev_run_todo+0x5f/0x310
[ 309.661852] rtnl_unlock+0x9/0x10
[ 309.661856] default_device_exit_batch+0x133/0x150
[ 309.661862] ops_exit_list.isra.0+0x4d/0x60
[ 309.661866] cleanup_net+0x1d8/0x2c0
[ 309.661872] process_one_work+0x1f4/0x6d0
[ 309.661876] worker_thread+0x49/0x4a0
[ 309.661881] kthread+0x107/0x140
[ 309.661884] ret_from_fork+0x2e/0x40
[ 309.661890] -> (rcu_preempt_state.barrier_mutex){+.+.-.} ops: 179 {
[ 309.661896] HARDIRQ-ON-W at:
[ 309.661901] __lock_acquire+0x5e5/0x1b50
[ 309.661905] lock_acquire+0xc9/0x220
[ 309.661910] __mutex_lock+0x6e/0x990
[ 309.661914] mutex_lock_nested+0x16/0x20
[ 309.661919] _rcu_barrier+0x31/0x160
[ 309.661923] rcu_barrier+0x10/0x20
[ 309.661928] netdev_run_todo+0x5f/0x310
[ 309.661932] rtnl_unlock+0x9/0x10
[ 309.661936] default_device_exit_batch+0x133/0x150
[ 309.661941] ops_exit_list.isra.0+0x4d/0x60
[ 309.661946] cleanup_net+0x1d8/0x2c0
[ 309.661951] process_one_work+0x1f4/0x6d0
[ 309.661955] worker_thread+0x49/0x4a0
[ 309.661960] kthread+0x107/0x140
[ 309.661964] ret_from_fork+0x2e/0x40
[ 309.661968] SOFTIRQ-ON-W at:
[ 309.661972] __lock_acquire+0x611/0x1b50
[ 309.661977] lock_acquire+0xc9/0x220
[ 309.661981] __mutex_lock+0x6e/0x990
[ 309.661986] mutex_lock_nested+0x16/0x20
[ 309.661990] _rcu_barrier+0x31/0x160
[ 309.661995] rcu_barrier+0x10/0x20
[ 309.661999] netdev_run_todo+0x5f/0x310
[ 309.662003] rtnl_unlock+0x9/0x10
[ 309.662008] default_device_exit_batch+0x133/0x150
[ 309.662013] ops_exit_list.isra.0+0x4d/0x60
[ 309.662017] cleanup_net+0x1d8/0x2c0
[ 309.662022] process_one_work+0x1f4/0x6d0
[ 309.662027] worker_thread+0x49/0x4a0
[ 309.662031] kthread+0x107/0x140
[ 309.662035] ret_from_fork+0x2e/0x40
[ 309.662039] IN-RECLAIM_FS-W at:
[ 309.662043] __lock_acquire+0x638/0x1b50
[ 309.662048] lock_acquire+0xc9/0x220
[ 309.662053] __mutex_lock+0x6e/0x990
[ 309.662058] mutex_lock_nested+0x16/0x20
[ 309.662062] _rcu_barrier+0x31/0x160
[ 309.662067] rcu_barrier+0x10/0x20
[ 309.662089] i915_gem_shrink_all+0x33/0x40 [i915]
[ 309.662109] i915_drop_caches_set+0x141/0x150 [i915]
[ 309.662114] simple_attr_write+0xc7/0xe0
[ 309.662119] full_proxy_write+0x4f/0x70
[ 309.662124] __vfs_write+0x23/0x120
[ 309.662128] vfs_write+0xc6/0x1f0
[ 309.662133] SyS_write+0x44/0xb0
[ 309.662138] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 309.662142] INITIAL USE at:
[ 309.662147] __lock_acquire+0x234/0x1b50
[ 309.662151] lock_acquire+0xc9/0x220
[ 309.662156] __mutex_lock+0x6e/0x990
[ 309.662160] mutex_lock_nested+0x16/0x20
[ 309.662165] _rcu_barrier+0x31/0x160
[ 309.662169] rcu_barrier+0x10/0x20
[ 309.662174] netdev_run_todo+0x5f/0x310
[ 309.662178] rtnl_unlock+0x9/0x10
[ 309.662183] default_device_exit_batch+0x133/0x150
[ 309.662188] ops_exit_list.isra.0+0x4d/0x60
[ 309.662192] cleanup_net+0x1d8/0x2c0
[ 309.662197] process_one_work+0x1f4/0x6d0
[ 309.662202] worker_thread+0x49/0x4a0
[ 309.662206] kthread+0x107/0x140
[ 309.662210] ret_from_fork+0x2e/0x40
[ 309.662214] }
[ 309.662220] ... key at: [<ffffffff81e4e1c8>] rcu_preempt_state+0x508/0x780
[ 309.662225] ... acquired at:
[ 309.662229] check_usage_forwards+0x12b/0x130
[ 309.662233] mark_lock+0x360/0x6f0
[ 309.662237] __lock_acquire+0x638/0x1b50
[ 309.662241] lock_acquire+0xc9/0x220
[ 309.662245] __mutex_lock+0x6e/0x990
[ 309.662249] mutex_lock_nested+0x16/0x20
[ 309.662253] _rcu_barrier+0x31/0x160
[ 309.662257] rcu_barrier+0x10/0x20
[ 309.662279] i915_gem_shrink_all+0x33/0x40 [i915]
[ 309.662298] i915_drop_caches_set+0x141/0x150 [i915]
[ 309.662303] simple_attr_write+0xc7/0xe0
[ 309.662307] full_proxy_write+0x4f/0x70
[ 309.662311] __vfs_write+0x23/0x120
[ 309.662315] vfs_write+0xc6/0x1f0
[ 309.662319] SyS_write+0x44/0xb0
[ 309.662323] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 309.662329]
stack backtrace:
[ 309.662335] CPU: 1 PID: 6435 Comm: gem_exec_gttfil Tainted: G W 4.11.0-rc1-CI-CI_DRM_2333+ #1
[ 309.662342] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011
[ 309.662348] Call Trace:
[ 309.662354] dump_stack+0x67/0x92
[ 309.662359] print_irq_inversion_bug.part.19+0x1a4/0x1b0
[ 309.662365] check_usage_forwards+0x12b/0x130
[ 309.662369] mark_lock+0x360/0x6f0
[ 309.662374] ? print_shortest_lock_dependencies+0x1a0/0x1a0
[ 309.662379] __lock_acquire+0x638/0x1b50
[ 309.662383] ? __mutex_unlock_slowpath+0x3e/0x2e0
[ 309.662388] ? trace_hardirqs_on+0xd/0x10
[ 309.662392] ? _rcu_barrier+0x31/0x160
[ 309.662396] lock_acquire+0xc9/0x220
[ 309.662400] ? _rcu_barrier+0x31/0x160
[ 309.662404] ? _rcu_barrier+0x31/0x160
[ 309.662409] __mutex_lock+0x6e/0x990
[ 309.662412] ? _rcu_barrier+0x31/0x160
[ 309.662416] ? _rcu_barrier+0x31/0x160
[ 309.662421] ? synchronize_rcu_expedited+0x35/0xb0
[ 309.662426] ? _raw_spin_unlock_irqrestore+0x52/0x60
[ 309.662434] mutex_lock_nested+0x16/0x20
[ 309.662438] _rcu_barrier+0x31/0x160
[ 309.662442] rcu_barrier+0x10/0x20
[ 309.662464] i915_gem_shrink_all+0x33/0x40 [i915]
[ 309.662484] i915_drop_caches_set+0x141/0x150 [i915]
[ 309.662489] simple_attr_write+0xc7/0xe0
[ 309.662494] full_proxy_write+0x4f/0x70
[ 309.662498] __vfs_write+0x23/0x120
[ 309.662503] ? rcu_read_lock_sched_held+0x75/0x80
[ 309.662507] ? rcu_sync_lockdep_assert+0x2a/0x50
[ 309.662512] ? __sb_start_write+0x102/0x210
[ 309.662516] ? vfs_write+0x17d/0x1f0
[ 309.662520] vfs_write+0xc6/0x1f0
[ 309.662524] ? trace_hardirqs_on_caller+0xe7/0x200
[ 309.662529] SyS_write+0x44/0xb0
[ 309.662533] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 309.662537] RIP: 0033:0x7f507eac24a0
[ 309.662541] RSP: 002b:00007fffda8720e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 309.662548] RAX: ffffffffffffffda RBX: ffffffff81482bd3 RCX: 00007f507eac24a0
[ 309.662552] RDX: 0000000000000005 RSI: 00007fffda8720f0 RDI: 0000000000000005
[ 309.662557] RBP: ffffc9000048bf88 R08: 0000000000000000 R09: 000000000000002c
[ 309.662561] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fffda872230
[ 309.662566] R13: 00007fffda872228 R14: 0000000000000201 R15: 00007fffda8720f0
[ 309.662572] ? __this_cpu_preempt_check+0x13/0x20
Fixes: 0eafec6d3244 ("drm/i915: Enable lockless lookup of request tracking via RCU")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100192
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.9+
Link: http://patchwork.freedesktop.org/patch/msgid/20170314115019.18127-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit bd784b7cc41af7a19cfb705fa6d800e511c4ab02)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321144531.12344-1-chris@chris-wilson.co.uk
|
|
The helper->expect_class_max must be set to the total number of
expect_policy minus 1, since we will use the statement "if (class >
helper->expect_class_max)" to validate the CTA_EXPECT_CLASS attr in
ctnetlink_alloc_expect.
So for compatibility, set the helper->expect_class_max to the
NFCTH_POLICY_SET_NUM attr's value minus 1.
Also: it's invalid when the NFCTH_POLICY_SET_NUM attr's value is zero.
1. this will result "expect_policy = kzalloc(0, GFP_KERNEL);";
2. we cannot set the helper->expect_class_max to a proper value.
So if nla_get_be32(tb[NFCTH_POLICY_SET_NUM]) is zero, report -EINVAL to
the userspace.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit f85c9dc ("Support tool ID and additional tool types") introduced mouse
and lens cursor tools to generic codepath, which covers both display (direct)
and opaque tablets (indirect devices). However, mouse and lens cursor tools are
only provided for opaque tablets. This patch ignores mouse and lens cursor tools
if the device is a display tablet.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
hid-corsair
This mouse sold by Corsair as Scimitar PRO RGB defines two consecutive
Logical Minimum items in its Application (Consumer.0001) report making
it non parseable. This patch fixes the report descriptor overriding
byte 77 in rdesc from 0x16 (Logical Minimum with 16 bits value) to 0x26
(Logical Maximum with 16 bits value).
Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add quirks for several corsair gaming devices to avoid long delays on
report initialization
Supported devices:
- Corsair K65RGB Rapidfire Gaming Keyboard
- Corsair K70RGB Rapidfire Gaming Keyboard
- Corsair Scimitar Pro RGB Gaming Mouse
Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Commit 5b779fc introduces the manual release of resources in wacom_remove() as
an addition to the driver's use of devm. The EKR resources can only be
released through wacom_remote_destroy_one() so we skip the manual release for
it.
Fixes: 5b779fc ("HID: wacom: release the resources before leaving despite devm")
Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The features struct for the second gen Intuos Pro uses the wrong constant for
the resolution. This fix is for commit 4922cd2.
Fixes: 4922cd2 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When snd_seq_pool_done() is called, it marks the closing flag to
refuse the further cell insertions. But snd_seq_pool_done() itself
doesn't clear the cells but just waits until all cells are cleared by
the caller side. That is, it's racy, and this leads to the endless
stall as syzkaller spotted.
This patch addresses the racy by splitting the setup of pool->closing
flag out of snd_seq_pool_done(), and calling it properly before
snd_seq_pool_done().
BugLink: http://lkml.kernel.org/r/CACT4Y+aqqy8bZA1fFieifNxR2fAfFQQABcBHj801+u5ePV0URw@mail.gmail.com
Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
CONFIG_SND_X86 is a menu config to filter only for x86-specific
drivers in its sub-menu, and this doesn't have to be tristate but
rather it should be a bool. Also, like other sub-menu configs, it's
more user-friendly to be default=y; it's merely a menu config and the
actual drivers are configured in the sub-menu, after all.
Fixes: 287599cf2d77 ("ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The digital AIF interfaces has been renamed in the sun8i audio codec
driver so the audio-routing in the device tree must be renamed too.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the driver to use SND_SOC_DAPM_AIF_IN instead of
SND_SOC_DAPM_DAC.
Rename the interface's widgets to be more precise on which slot
the interface is connected.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
An unwanted space is present in an audio widget's name on the dapm
routing. It causes an error on the recognition of this widget (error:
("no dapm match for AIF1 Slot 0 Right").
Remove the space fixes it.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the driver to use the new SOC_DAPM_DOUBLE definition
on the digital DAC mixer.
Update the names accordingly as, when they are shared, the
controls are not prefixed with the widget's name anymore.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "HP" widget is already present and take part to
the analog part (sun8i-codec-analog).
Remove it from the digital part as it is unnecessary.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 65c059bcaa73 ("powerpc: Enable support for GCC plugins") enabled GCC
plugins on powerpc, but neglected to update the architecture list in the
docs. Rectify this.
Fixes: 65c059bcaa73 ("powerpc: Enable support for GCC plugins")
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This reverts commit 3f91a89d424a79f8082525db5a375e438887bb3e.
Now that we do have the machinery for using the radix MMU under a
hypervisor, the extra check and comment introduced in 3f91a89d424a are
no longer correct. The result is that when booted under a hypervisor
that only allows use of radix, we clear the MMU_FTR_TYPE_RADIX and
then set it again, and print a warning about ignoring the
disable_radix command line option, even though the command line does
not include "disable_radix".
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
DSI forwards te-gpios interrupts to display controller, but if display
controller works in HW-TRIGGER mode this interrupt is not necessary.
Making te-gpios property optional allows to avoid generating spare
interrupts.
And also if panel device node of command mode panel device doesn't provide
te-gpios property then the panel driver failed to probe. This was a critial
issue.
With this patch we can not only get rid of 60 interrupt callbacks per second
but also fix the critial issues.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Printing raw kernel pointers might reveal information which sometimes we
try to hide (e.g. with Kernel Address Space Layout Randomization). Use
the "%pK" format so these pointers will be hidden for unprivileged
users.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The patch fixes copy/paste bug introduced during code refactoring.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: b93c2e8b5d9d ("drm/exynos/decon5433: configure sysreg in case of hardware trigger")Fixes:
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
VBLANK interrupt should be signalled as soon as scanout ends, front porch
is the best moment.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
DECON in case of video mode generates interrupt by default at start
of vertical back porch. As this interrupt is used to generate VBLANK
events more optimal point is start of vertical front porch.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Current implementation of event handling assumes that vblank interrupt is
always called at the right time. It is not true, it can be delayed due to
various reasons. As a result different races can happen. The patch fixes
the issue by using hardware frame counter present in DECON to serialize
vblank and commit completion events.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
CRTC event is currently send with next vblank, or instantly in case crtc
is being disabled. This approach usually works, but in corner cases it can
result in premature event generation. Only device driver is able to verify
if the event can be sent. This patch is a first step in that direction - it
moves event handling to the drivers.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Support for Exynos4415 is going away because there are no internal nor
external users.
Since commit 46dcf0ff0de3 ("ARM: dts: exynos: Remove exynos4415.dtsi"),
the platform cannot be instantiated so remove also the drivers.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kukjin Kim <kgene@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
"&" was obviously intended instead of "|". The original condition is
always true.
Fixes: b93c2e8b5d9d ("drm/exynos/decon5433: configure sysreg in case of hardware trigger")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Sometimes guest driver will only update partial of the GGTT entry then
access it. In this situation a failure will happen while translating
the gpa to hpa.
Now in this situation we let the corresponding shadow entry pointing
to a scratch page.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
It appears missing slaves on the i2c should cause 0xff to be returned
rather than 0. So, when the Windows driver tried to address a slave
at 0x40 and got 0’s back rather than 0xff’s it must have confused it.
Signed-off-by: Paul Durrant <Paul.Durrant@citrix.com>
Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Fix the wrong offset of the RCS specific mocs
Fixes: 178657139307 ("drm/i915/gvt: vGPU context switch")
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
sugov_start() only initializes struct sugov_cpu per-CPU structures
for shared policies, but it should do that for single-CPU policies too.
That in particular makes the IO-wait boost mechanism work in the
cases when cpufreq policies correspond to individual CPUs.
Fixes: 21ca6d2c52f8 (cpufreq: schedutil: Add iowait boosting)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
|
|
qcom_smd_register_edge() is provided by either QCOM_SMD or RPMSG_QCOM_SMD,
and if both of them are disabled, it does nothing.
The check for the PIL drivers however only checks for QCOM_SMD, so it breaks
with QCOM_SMD=n && RPMSG_QCOM_SMD=m:
drivers/remoteproc/built-in.o: In function `smd_subdev_remove':
qcom_wcnss_iris.c:(.text+0x231c): undefined reference to `qcom_smd_unregister_edge'
drivers/remoteproc/built-in.o: In function `smd_subdev_probe':
qcom_wcnss_iris.c:(.text+0x2344): undefined reference to `qcom_smd_register_edge'
drivers/remoteproc/built-in.o: In function `smd_subdev_probe':
qcom_q6v5_pil.c:(.text+0x3538): undefined reference to `qcom_smd_register_edge'
qcom_q6v5_pil.c:(.text+0x3538): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_smd_register_edge'
This clarifies the Kconfig dependency.
Fixes: 4b48921a8f74 ("remoteproc: qcom: Use common SMD edge handler")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The dm_bitset_cursor_begin() call was using the incorrect nr_entries.
Also, the last dm_bitset_cursor_next() must be avoided if we're at the
end of the cursor.
Fixes: 7f1b21591a6 ("dm cache metadata: use cursor api in blocks_are_clean_separate_dirty()")
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
