summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-09Merge tag 'drm-intel-fixes-2017-06-08' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for v4.12-rc5 * tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: fix warning for unused variable drm/i915: Fix 90/270 rotated coordinates for FBC drm/i915: Restore has_fbc=1 for ILK-M drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail drm/i915: Fix logical inversion for gen4 quirking drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2. drm/i915: Prevent the system suspend complete optimization drm/i915/psr: disable psr2 for resolution greater than 32X20 drm/i915: Hold a wakeref for probing the ring registers drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle drm/i915: Disable decoupled MMIO drm/i915/guc: Remove stale comment for q_fail drm/i915: Serialize GTT/Aperture accesses on BXT
2017-06-09Merge tag 'drm-misc-fixes-2017-06-07' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-fixes Driver Changes: - kirin: Use correct dt port for the bridge (John) - meson: Fix regression caused by adding HDMI support to allow board configurations without HDMI (Neil) Cc: John Stultz <john.stultz@linaro.org> Cc: Neil Armstrong <narmstrong@baylibre.com> * tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc: drm/meson: Fix driver bind when only CVBS is available drm: kirin: Fix drm_of_find_panel_or_bridge conversion
2017-06-09Merge branch 'mediatek-drm-fixes-4.12-rc1' of ↵Dave Airlie
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes mediatek fixes * 'mediatek-drm-fixes-4.12-rc1' of https://github.com/ckhu-mediatek/linux.git-tags: drm/mediatek: fix mtk_hdmi_setup_vendor_specific_infoframe mistake drm/mediatek: fix a timeout loop
2017-06-09Merge tag 'imx-drm-fixes-2017-06-08' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-fixes imx-drm: PRE clock gating, panelless LDB, and VDIC CSI selection fixes - Keep the external clock input to the PRE ungated and only use the internal soft reset to keep the module in low power state, to avoid sporadic startup failures. - Ignore -ENODEV return values from drm_of_find_panel_or_bridge in the LDB driver to fix probing for devices that still do not specify a panel in the device tree. - Fix the CSI input selection to the VDIC. According to experiments, the real behaviour differs a bit from the documentation. * tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-v3: Fix CSI selection for VDIC drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failure gpu: ipu-v3: pre: only use internal clock gating
2017-06-08drm/i915: fix warning for unused variableJani Nikula
drivers/gpu/drm/i915/intel_engine_cs.c: In function ‘intel_engine_is_idle’: drivers/gpu/drm/i915/intel_engine_cs.c:1103:27: error: unused variable ‘dev_priv’ [-Werror=unused-variable] struct drm_i915_private *dev_priv = engine->i915; ^~~~~~~~ Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/meson: Fix driver bind when only CVBS is availableNeil Armstrong
While introducing HDMI support, component matching on connectors node were bypassed since no driver would actually bind on the DT node. But when only a CVBS connector is present, only a single node is found in the graph, but ignored and a NULL match table is given to the component code. This code permits bypassing the components framework by binding directly the DRM driver when no components needs to be loaded. Fixes: a41e82e6c457 ("drm/meson: Add support for components") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496067352-8733-1-git-send-email-narmstrong@baylibre.com
2017-06-07drm/i915: Fix 90/270 rotated coordinates for FBCVille Syrjälä
The clipped src coordinates have already been rotated by 270 degrees for when the plane rotation is 90/270 degrees, hence the FBC code should no longer swap the width and height. Cc: stable@vger.kernel.org Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.com Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit 73714c05df97d7527e7eaaa771472ef2ede46fa3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Restore has_fbc=1 for ILK-MVille Syrjälä
Restore the lost has_fbc flag for mobile ILK. Cc: Carlos Santa <carlos.santa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: a13233804686 ("drm/i915: Introduce GEN5_FEATURES for device info") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170606133229.12439-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit c2d1a0ced2603c4a17fa9c53c37e415905cf5a6d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Workaround VLV/CHV DSI scanline counter hardware failVille Syrjälä
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter increment is not lined up with the start of vblank like it is on every other platform and output type. This causes problems for both the vblank timestamping and atomic update vblank evasion. On my FFRD8 machine at least, the scanline counter increment happens about 1/3 of a scanline ahead of the start of vblank (which is where all register latching happens still). That means we can't trust the scanline counter to tell us whether we're in vblank or not while we're on that particular line. In order to keep vblank timestamping in working condition when called from the vblank irq, we'll leave scanline_offset at one, which means that the entire line containing the start of vblank is considered to be inside the vblank. For the vblank evasion we'll need to consider that entire line to be bad, since we can't tell whether the registers already got latched or not. And we can't actually use the start of vblank interrupt to get us past that line as the interrupt would fire too soon, and then we'd up waiting for the next start of vblank instead. One way around that would using the frame start interrupt instead since that wouldn't fire until the next scanline, but that would require some bigger changes in the interrupt code. So for simplicity we'll just poll until we get past the bad line. v2: Adjust the comments a bit Cc: stable@vger.kernel.org Cc: Jonas Aaberg <cja@gmx.net> Tested-by: Jonas Aaberg <cja@gmx.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com Tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> (cherry picked from commit ec1b4ee2834e66884e5b0d3d465f347ff212e372) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Fix logical inversion for gen4 quirkingChris Wilson
The assertion that we want to make before disabling the pin of the pages for the unknown swizzling quirk is that the quirk is indeed active, and that the quirk is disabled before we do apply it to the pages. Fixes: 2c3a3f44dc13 ("drm/i915: Fix pages pin counting around swizzle quirk") Fixes: 957870f93412 ("drm/i915: Split out i915_gem_object_set_tiling()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170521124014.27678-1-chris@chris-wilson.co.uk Reviewed-bhy: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 20bb377106af69d16269b1837e9a945b9f508a2e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionallyChris Wilson
Commit 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") added the restoration of the invalidation routine after the GuC was disabled, but missed that the GuC was unconditionally disabled when not used. This then overwrites the invalidate routine for the older chipsets, causing havoc and breaking resume as the most obvious victim. We place the guard inside i915_ggtt_disable_guc() to be backport friendly (the bug was introduced into v4.11) but it would be preferred to be in more control over when this was guard (i.e. do not try and teardown the data structures before we have enabled them). That should be true with the reorganisation of the guc loaders. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: <stable@vger.kernel.org> # v4.11+ Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry <michel.thierry@intel.com> (cherry picked from commit cb60606d835ca8b2f744835116bcabe64ce88849) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.Maarten Lankhorst
On some systems there can be a race condition in which no crtc state is added to the first atomic commit. This results in all crtc's having a null DDB allocation, causing a FIFO underrun on any update until the first modeset. Changes since v1: - Do not take the connection_mutex, this is already done below. Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic check time (v4)") Cc: <stable@vger.kernel.org> # v4.8+ Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit 367d73d2806085bb507ab44c1f532640917fd5ca) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Prevent the system suspend complete optimizationImre Deak
Since commit bac2a909a096c9110525c18cbb8ce73c660d5f71 Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Date: Wed Jan 21 02:17:42 2015 +0100 PCI / PM: Avoid resuming PCI devices during system suspend PCI devices will default to allowing the system suspend complete optimization where devices are not woken up during system suspend if they were already runtime suspended. This however breaks the i915/HDA drivers for two reasons: - The i915 driver has system suspend specific steps that it needs to run, that bring the device to a different state than its runtime suspended state. - The HDA driver's suspend handler requires power that it will request from the i915 driver's power domain handler. This in turn requires the i915 driver to runtime resume itself, but this won't be possible if the suspend complete optimization is in effect: in this case the i915 runtime PM is disabled and trying to get an RPM reference returns -EACCESS. Solve this by requiring the PCI/PM core to resume the device during system suspend which in effect disables the suspend complete optimization. Regardless of the above commit the optimization stayed disabled for DRM devices until commit d14d2a8453d650bea32a1c5271af1458cd283a0f Author: Lukas Wunner <lukas@wunner.de> Date: Wed Jun 8 12:49:29 2016 +0200 drm: Remove dev_pm_ops from drm_class so this patch is in practice a fix for this commit. Another reason for the bug staying hidden for so long is that the optimization for a device is disabled if it's disabled for any of its children devices. i915 may have a backlight device as its child which doesn't support runtime PM and so doesn't allow the optimization either. So if this backlight device got registered the bug stayed hidden. Credits to Marta, Tomi and David who enabled pstore logging, that caught one instance of this issue across a suspend/ resume-to-ram and Ville who rememberd that the optimization was enabled for some devices at one point. The first WARN triggered by the problem: [ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915] [ 6250.746448] pm_runtime_get_sync() failed: -13 [ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_ numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915] [ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G U W 4.11.0-rc5-CI-CI_DRM_334+ #1 [ 6250.746515] Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017 [ 6250.746521] Workqueue: events_unbound async_run_entry_fn [ 6250.746525] Call Trace: [ 6250.746530] dump_stack+0x67/0x92 [ 6250.746536] __warn+0xc6/0xe0 [ 6250.746542] ? pci_restore_standard_config+0x40/0x40 [ 6250.746546] warn_slowpath_fmt+0x46/0x50 [ 6250.746553] ? __pm_runtime_resume+0x56/0x80 [ 6250.746584] intel_runtime_pm_get+0x6b/0xd0 [i915] [ 6250.746610] intel_display_power_get+0x1b/0x40 [i915] [ 6250.746646] i915_audio_component_get_power+0x15/0x20 [i915] [ 6250.746654] snd_hdac_display_power+0xc8/0x110 [snd_hda_core] [ 6250.746661] azx_runtime_resume+0x218/0x280 [snd_hda_intel] [ 6250.746667] pci_pm_runtime_resume+0x76/0xa0 [ 6250.746672] __rpm_callback+0xb4/0x1f0 [ 6250.746677] ? pci_restore_standard_config+0x40/0x40 [ 6250.746682] rpm_callback+0x1f/0x80 [ 6250.746686] ? pci_restore_standard_config+0x40/0x40 [ 6250.746690] rpm_resume+0x4ba/0x740 [ 6250.746698] __pm_runtime_resume+0x49/0x80 [ 6250.746703] pci_pm_suspend+0x57/0x140 [ 6250.746709] dpm_run_callback+0x6f/0x330 [ 6250.746713] ? pci_pm_freeze+0xe0/0xe0 [ 6250.746718] __device_suspend+0xf9/0x370 [ 6250.746724] ? dpm_watchdog_set+0x60/0x60 [ 6250.746730] async_suspend+0x1a/0x90 [ 6250.746735] async_run_entry_fn+0x34/0x160 [ 6250.746741] process_one_work+0x1f2/0x6d0 [ 6250.746749] worker_thread+0x49/0x4a0 [ 6250.746755] kthread+0x107/0x140 [ 6250.746759] ? process_one_work+0x6d0/0x6d0 [ 6250.746763] ? kthread_create_on_node+0x40/0x40 [ 6250.746768] ret_from_fork+0x2e/0x40 [ 6250.746778] ---[ end trace 102a62fd2160f5e6 ]--- v2: - Use the new pci_dev->needs_resume flag, to avoid any overhead during the ->pm_prepare hook. (Rafael) v3: - Update commit message to reference the actual regressing commit. (Lukas) v4: - Rebase on v4 of patch 1/2. Fixes: d14d2a8453d6 ("drm: Remove dev_pm_ops from drm_class") References: https://bugs.freedesktop.org/show_bug.cgi?id=100378 References: https://bugs.freedesktop.org/show_bug.cgi?id=100770 Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Marta Lofstedt <marta.lofstedt@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Tomi Sarvela <tomi.p.sarvela@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: linux-pci@vger.kernel.org Cc: <stable@vger.kernel.org> # v4.10.x: 4d071c3 - PCI/PM: Add needs_resume flag Cc: <stable@vger.kernel.org> # v4.10.x Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Marta Lofstedt <marta.lofstedt@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com (cherry picked from commit adfdf85d795f4d4f487b61ee0b169d64c6e19081) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915/psr: disable psr2 for resolution greater than 32X20Nagaraju, Vathsala
psr1 is also disabled for panel resolution greater than 32X20. Added psr2 check to disable only for psr2 panels having resolution greater than 32X20. issue was introduced by commit-id : "acf45d11050abd751dcec986ab121cb2367dcbba" commit message: "PSR2 is restricted to work with panel resolutions upto 3200x2000, move the check to intel_psr_match_conditions and fully block psr." v2: (Rodrigo) Add previous commit details which introduced the issue Fixes: acf45d11050a ("drm/i915/psr: disable psr2 for resolution greater than 32X20") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Yaroslav Shabalin <yaroslav.shabalin@gmail.com> Reported-by: Yaroslav Shabalin <yaroslav.shabalin@gmail.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com (cherry picked from commit bef8c056fba09aa4629fe5a2d3efe64068d049db) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Hold a wakeref for probing the ring registersChris Wilson
Allow intel_engine_is_idle() to be called outside of the GT wakeref by acquiring the device runtime pm for ourselves. This allows the function to act as check after we assume the engine is idle and we release the GT wakeref held whilst we have requests. At the moment, we do not call it outside of an awake context but taking the wakeref as required makes it more convenient to use for quick debugging in future. [ 2613.401647] RPM wakelock ref not held during HW access [ 2613.401684] ------------[ cut here ]------------ [ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915] [ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915] [ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1 [ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 [ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000 [ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915] [ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292 [ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006 [ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7 [ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000 [ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c [ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150 [ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000 [ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0 [ 2613.401889] Call Trace: [ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915] [ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915] [ 2613.401951] fault_irq_set+0x40/0x90 [i915] [ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915] [ 2613.401976] simple_attr_write+0xc7/0xe0 [ 2613.401981] full_proxy_write+0x4f/0x70 [ 2613.401987] __vfs_write+0x23/0x120 [ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80 [ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 2613.401999] ? __sb_start_write+0xfa/0x1f0 [ 2613.402004] vfs_write+0xc5/0x1d0 [ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 2613.402013] SyS_write+0x44/0xb0 [ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2613.402022] RIP: 0033:0x7f39eded6670 [ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670 [ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006 [ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001 [ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33 [ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20 [ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48 [ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]--- Fixes: 5400367a864d ("drm/i915: Ensure the engine is idle before manually changing HWS") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-2-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit a091d4ee931b16ce4fef945d39a20b851a7e17b7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Short-circuit i915_gem_wait_for_idle() if already idleChris Wilson
If the device is asleep (no GT wakeref), we know the GPU is already idle. If we add an early return, we can avoid touching registers and checking hw state outside of the assumed GT wakelock. This prevents causing such errors whilst debugging: [ 2613.401647] RPM wakelock ref not held during HW access [ 2613.401684] ------------[ cut here ]------------ [ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915] [ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915] [ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1 [ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 [ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000 [ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915] [ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292 [ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006 [ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7 [ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000 [ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c [ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150 [ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000 [ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0 [ 2613.401889] Call Trace: [ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915] [ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915] [ 2613.401951] fault_irq_set+0x40/0x90 [i915] [ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915] [ 2613.401976] simple_attr_write+0xc7/0xe0 [ 2613.401981] full_proxy_write+0x4f/0x70 [ 2613.401987] __vfs_write+0x23/0x120 [ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80 [ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 2613.401999] ? __sb_start_write+0xfa/0x1f0 [ 2613.402004] vfs_write+0xc5/0x1d0 [ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 2613.402013] SyS_write+0x44/0xb0 [ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2613.402022] RIP: 0033:0x7f39eded6670 [ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670 [ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006 [ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001 [ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33 [ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20 [ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48 [ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]--- Fixes: 25112b64b3d2 ("drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 863e9fde1a7061dad09bb299c65bed5f1ccb44ff) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Disable decoupled MMIOKai Chen
The decoupled MMIO feature doesn't work as intended by HW team. Enabling it with forcewake will only make debugging efforts more difficult, so let's disable it. Fixes: 85ee17ebeedd ("drm/i915/bxt: Broxton decoupled MMIO") Cc: Zhe Wang <zhe1.wang@intel.com> Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Kai Chen <kai.chen@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com (cherry picked from commit 0051c10acabb631cfd439eae73289e6e4c39b2b7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915/guc: Remove stale comment for q_failMichal Wajdeczko
This member was dropped long time ago. Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 4afc67be8e203ee8f5e95e829c0777eae7a14702) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Serialize GTT/Aperture accesses on BXTJon Bloomfield
BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT [Note: This will cause a performance penalty for some use cases, but avoiding hangs trumps performance hits. This may need to be worked around in Mesa to recover the lost performance.] v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 0ef34ad6222abfa513117515fec720c33a58f105) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-06drm: kirin: Fix drm_of_find_panel_or_bridge conversionJohn Stultz
This fixes a regression introduced by ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") that was recently merged, causing HDMI output to not work. For the kirin driver, the port value should be 1 instead of 0, so this oneline patch fixes it and gets graphics working again. Cc: Rob Herring <robh@kernel.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Xinliang Liu <xinliang.liu@linaro.org> Fix-suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1495557626-25285-1-git-send-email-john.stultz@linaro.org
2017-06-06gpu: ipu-v3: Fix CSI selection for VDICMarek Vasut
The description of the CSI_SEL bit in the i.MX6 reference manual is incorrect. It states "This bit defines which CSI is the input to the IC. This bit is effective only if IC_INPUT is bit cleared". From experiment it was found this is in fact not correct. The CSI_SEL bit selects which CSI is input to _both_ the VDIC _and_ the IC. If the IC_INPUT bit is set so that the IC is receiving from the VDIC, the IC ignores the CSI_SEL bit, but CSI_SEL still selects which CSI the VDIC receives from in that case. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-06-06drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failureLeonard Crestez
Not having an endpoint bound in DT should not cause a failure here, there are fallbacks. So explicitly accept a missing endpoint. This behavior change was introduced by refactoring in drm_of parsing code and it should not require dts changes. In particular this fixes imx6qdl-sabreauto boards. Link: https://lists.freedesktop.org/archives/dri-devel/2017-May/141233.html Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-06-06gpu: ipu-v3: pre: only use internal clock gatingLucas Stach
By setting the SFTRST bit, the PRE will be held in the lowest power state with clocks to the internal blocks gated. When external clock gating is used (from the external clock controller, or by setting the CLKGATE bit) the PRE will sporadically fail to start. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Fixes: d2a34232580a ("gpu: ipu-v3: add driver for Prefetch Resolve Engine") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-06-06Merge tag 'drm-misc-fixes-2017-06-02' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-fixes Core Changes: - Grab locks in drm_atomic_helper_resume() (Daniel) - Fix oops when unplugging USB device (expand cleanup in drm_unplug_dev) (Hans) Driver Changes: - rockchip: Don't output 10-bit format to 8-bit encoders (Mark) Cc: Mark yao <mark.yao@rock-chips.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> * tag 'drm-misc-fixes-2017-06-02' of git://anongit.freedesktop.org/git/drm-misc: drm: Fix oops + Xserver hang when unplugging USB drm devices drm: Fix locking in drm_atomic_helper_resume drm/rockchip: Correct vop out_mode configure
2017-06-06Merge branch 'linux-4.12' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
4 nouveau regression fixes. * 'linux-4.12' of git://github.com/skeggsb/linux: drm/nouveau/tmr: fully separate alarm execution/pending lists drm/nouveau: enable autosuspend only when it'll actually be used drm/nouveau: replace multiple open-coded runpm support checks with function drm/nouveau/kms/nv50: add null check before pointer dereference
2017-06-06drm/nouveau/tmr: fully separate alarm execution/pending listsBen Skeggs
Reusing the list_head for both is a bad idea. Callback execution is done with the lock dropped so that alarms can be rescheduled from the callback, which means that with some unfortunate timing, lists can get corrupted. The execution list should not require its own locking, the single function that uses it can only be called from a single context. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-06-06drm/nouveau: enable autosuspend only when it'll actually be usedBen Skeggs
This prevents a deadlock that somehow results from the suspend() -> forbid() -> resume() callchain. [ 125.266960] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 1 [ 370.120872] INFO: task kworker/4:1:77 blocked for more than 120 seconds. [ 370.120920] Tainted: G O 4.12.0-rc3 #20 [ 370.120947] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 370.120982] kworker/4:1 D13808 77 2 0x00000000 [ 370.120998] Workqueue: pm pm_runtime_work [ 370.121004] Call Trace: [ 370.121018] __schedule+0x2bf/0xb40 [ 370.121025] ? mark_held_locks+0x5f/0x90 [ 370.121038] schedule+0x3d/0x90 [ 370.121044] rpm_resume+0x107/0x870 [ 370.121052] ? finish_wait+0x90/0x90 [ 370.121065] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121070] pm_runtime_forbid+0x4c/0x60 [ 370.121129] nouveau_pmops_runtime_suspend+0xaf/0xc0 [nouveau] [ 370.121139] pci_pm_runtime_suspend+0x5f/0x170 [ 370.121147] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121152] __rpm_callback+0xb9/0x1e0 [ 370.121159] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121166] rpm_callback+0x24/0x80 [ 370.121171] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121176] rpm_suspend+0x138/0x6e0 [ 370.121192] pm_runtime_work+0x7b/0xc0 [ 370.121199] process_one_work+0x253/0x6a0 [ 370.121216] worker_thread+0x4d/0x3b0 [ 370.121229] kthread+0x133/0x150 [ 370.121234] ? process_one_work+0x6a0/0x6a0 [ 370.121238] ? kthread_create_on_node+0x70/0x70 [ 370.121246] ret_from_fork+0x2a/0x40 [ 370.121283] Showing all locks held in the system: [ 370.121291] 2 locks held by kworker/4:1/77: [ 370.121298] #0: ("pm"){.+.+.+}, at: [<ffffffffac0d3530>] process_one_work+0x1d0/0x6a0 [ 370.121315] #1: ((&dev->power.work)){+.+.+.}, at: [<ffffffffac0d3530>] process_one_work+0x1d0/0x6a0 [ 370.121330] 1 lock held by khungtaskd/81: [ 370.121333] #0: (tasklist_lock){.+.+..}, at: [<ffffffffac10fc8d>] debug_show_all_locks+0x3d/0x1a0 [ 370.121355] 1 lock held by dmesg/1639: [ 370.121358] #0: (&user->lock){+.+.+.}, at: [<ffffffffac124b6d>] devkmsg_read+0x4d/0x360 [ 370.121377] ============================================= Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-06-06drm/nouveau: replace multiple open-coded runpm support checks with functionBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-06-06drm/nouveau/kms/nv50: add null check before pointer dereferenceGustavo A. R. Silva
Add null check before dereferencing pointer asyc Addresses-Coverity-ID: 1397932 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-06-04Linux 4.12-rc4v4.12-rc4Linus Torvalds
2017-06-04fs/ufs: Set UFS default maximum bytes per fileRichard Narron
This fixes a problem with reading files larger than 2GB from a UFS-2 file system: https://bugzilla.kernel.org/show_bug.cgi?id=195721 The incorrect UFS s_maxsize limit became a problem as of commit c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") which started using s_maxbytes to avoid a page index overflow in do_generic_file_read(). That caused files to be truncated on UFS-2 file systems because the default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it. Here I simply increase the default to a common value used by other file systems. Signed-off-by: Richard Narron <comet.berkeley@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will B <will.brokenbourgh2877@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737f45e2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-04Merge tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Bugfixes include: - Fix a typo in commit e092693443b ("NFS append COMMIT after synchronous COPY") that breaks copy offload - Fix the connect error propagation in xs_tcp_setup_socket() - Fix a lock leak in nfs40_walk_client_list - Verify that pNFS requests lie within the offset range of the layout segment" * tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Mark unnecessarily extern functions as static SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() NFSv4.0: Fix a lock leak in nfs40_walk_client_list pnfs: Fix the check for requests in range of layout segment xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup() pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() NFS fix COMMIT after COPY
2017-06-04Merge tag 'tty-4.12-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fix from Greg KH: "Here is a single tty core fix for 4.12-rc4. It reverts a patch that a lot of people reported as causing lockdep and other warnings. Right after I reverted this in my tree, it seems like another "correct" fix might have shown up, but it's too late in the release cycle to be messing with tty core locking, so let's just revert this for now to go back how things always have been and try it again for 4.13. This has not been in linux-next as I only reverted it a few hours ago" * tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: fix port buffer locking"
2017-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: - a couple of regression fixes in synaptics and axp20x-pek drivers - try to ease transition from PS/2 to RMI for Synaptics touchpad users by ensuring we do not try to activate RMI mode when RMI SMBus support is not enabled, and nag users a bit to enable it - plus a couple of other changes that seemed worthwhile for this release * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL Input: synaptics - tell users to report when they should be using rmi-smbus Input: synaptics - warn the users when there is a better mode Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled Input: synaptics - clear device info before filling in Input: silead - disable interrupt during suspend
2017-06-04Merge tag 'rtc-4.12-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixlet from Alexandre Belloni: "A single patch, not really a fix but I don't think there is any reason to delay it. Change the mailing list address" * tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: MAINTAINERS: update RTC mailing list
2017-06-04Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is nine fixes, seven of which are for the qedi driver (new as of 4.10) the other two are a use after free in the cxgbi drivers and a potential NULL dereference in the rdac device handler" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libcxgbi: fix skb use after free scsi: qedi: Fix endpoint NULL panic during recovery. scsi: qedi: set max_fin_rt default value scsi: qedi: Set firmware tcp msl timer value. scsi: qedi: Fix endpoint NULL panic in qedi_set_path. scsi: qedi: Set dma_boundary to 0xfff. scsi: qedi: Correctly set firmware max supported BDs. scsi: qedi: Fix bad pte call trace when iscsiuio is stopped. scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get()
2017-06-04Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "For the most part this is just a minor -rc cycle for the rdma subsystem. Even given that this is all of the -rc patches since the merge window closed, it's still only about 25 patches: - Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes - A few upper layer protocol fixes (IPoIB, iSER, SRP) - A modest number of core fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits) RDMA/SA: Fix kernel panic in CMA request handler flow RDMA/umem: Fix missing mmap_sem in get umem ODP call RDMA/core: not to set page dirty bit if it's already set. RDMA/uverbs: Declare local function static and add brackets to sizeof RDMA/netlink: Reduce exposure of RDMA netlink functions RDMA/srp: Fix NULL deref at srp_destroy_qp() RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings RDMA/qedr: add null check before pointer dereference RDMA/mlx5: set UMR wqe fence according to HCA cap net/mlx5: Define interface bits for fencing UMR wqe RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled RDMA/qib,hfi1: Fix MR reference count leak on write with immediate RDMA/hfi1: Defer setting VL15 credits to link-up interrupt RDMA/hfi1: change PCI bar addr assignments to Linux API functions RDMA/hfi1: fix array termination by appending NULL to attr array RDMA/iw_cxgb4: fix the calculation of ipv6 header size RDMA/iw_cxgb4: calculate t4_eq_status_entries properly RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers RDMA/nes: ACK MPA Reply frame ...
2017-06-04Revert "tty: fix port buffer locking"Greg Kroah-Hartman
This reverts commit 925bb1ce47f429f69aad35876df7ecd8c53deb7e. It causes lots of warnings and problems so for now, let's just revert it. Reported-by: <valdis.kletnieks@vt.edu> Reported-by: Russell King <linux@armlinux.org.uk> Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03nfs: Mark unnecessarily extern functions as staticJan Kara
nfs_initialise_sb() and nfs_clone_super() are declared as extern even though they are used only in fs/nfs/super.c. Mark them as static. Also remove explicit 'inline' directive from nfs_initialise_sb() and leave it upto compiler to decide whether inlining is worth it. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-06-03Merge tag 'hwmon-for-linus-v4.12-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "A couple of patches for the aspeed pwm fan driver" * tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1 hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT hwmon: (aspeed-pwm-tacho) Select REGMAP
2017-06-03Merge tag 'for-linus-20170602' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Brian Norris: "NAND updates from Boris: tango fixes: - Add missing MODULE_DEVICE_TABLE() in tango_nand.c - Update the number of corrected bitflips core fixes: - Fix a long standing memory leak in nand_scan_tail() - Fix several bugs introduced by the per-vendor init/detection infrastructure (introduced in 4.12) - Add a static specifier to nand_ooblayout_lp_hamming_ops definition" * tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd: mtd: nand: make nand_ooblayout_lp_hamming_ops static mtd: nand: tango: Update ecc_stats.corrected mtd: nand: tango: Export OF device ID table as module aliases mtd: nand: samsung: warn about un-parseable ECC info mtd: nand: free vendor-specific resources in init failure paths mtd: nand: drop unneeded module.h include mtd: nand: don't leak buffers when ->scan_bbt() fails
2017-06-03hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1Stefan Schaeckeler
Make fan and pwm names in sysfs start with index 1 in accordance to Documentation/hwmon/sysfs-interface conventions. Current implementation starts with index 0, making tools such as sensors(1) skip the first fan. Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-03hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimedStefan Schaeckeler
Call of_node_put() on a node claimed with of_node_get() or by any other means such as for_each_child_of_node(). Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-02Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 tooHans de Goede
acpi_dev_found checks that there is a matching ACPI node, but it may be disabled (_STA method returns 0) in which case the soc_button_array driver will not bind to it and axp20x-pek should handle the power-button. This commit switches from acpi_dev_found to acpi_dev_present to avoid not registering an input-dev for the powerbutton when there is a disabled PNP0C40 device. The ACPI-6.0 standard defines a standard gpio button device using the ACPI0011 HID replacing the custom PNP0C40 gpio device, many newer devices define both PNP0C40 and ACPI0011 devices enabling one or the other depending on whether the BIOS thinks it is going to boot Android or Windows. This commit adds a check for the ACPI0011 device, so that if either device is present *and* enabled we don't register an input-dev for the powerbutton. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-02Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry TrailHans de Goede
Commit 9b13a4ca8d2c ("Input: axp20x-pek - do not register input device on some systems") added a check for the INTCFD9 ACPI device which also handles the powerbutton as on some systems the powerbutton is connected to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled by soc_button_array which attaches itself to the INTCFD9 ACPI device. Testing + comparing DSDTs has shown that this only happens on Cherry Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on Bay Trail devices but there the power button is only connected to the PMIC and not handled by soc_button_array. This means that the INTCFD9 check has caused a regression on Bay Trail devices, causing power-button presses to no longer be seen. This commit fixes this by limiting the check to devices where the ACPI node for the AXP288 contains a _HRV (hardware revision) attribute with a value of 3 which indicates we are dealing with a Cherry Trail platform. Fixes: 9b13a4ca8d2c ("Input: axp20x-pek - do not register input ...") Reported-by: Сергей Трусов <t.rus76@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-02Merge tag 'v4.12-rc3' into for-linusDmitry Torokhov
Merge with mainline to get acpi_dev_present() needed by patches to axp20x-pek driver.
2017-06-02Merge tag 'acpi-4.12-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert one more problematic commit related to the ACPI-based handling of laptop lids and make some unuseful error messages coming from ACPICA go away. Specifics: - Revert one more commit related to the ACPI-based handling of laptop lids that changed the default behavior on laptops that booted with closed lids and introduced a regression there (Benjamin Tissoires). - Add a missing acpi_put_table() to the code implementing the /sys/firmware/acpi/tables interface to prevent a counter in the ACPICA core from overflowing (Dan Williams). - Drop error messages printed by ACPICA on acpi_get_table() reference counting mismatches as they need not indicate real errors at this point (Lv Zheng)" * tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Tables: Fix regression introduced by a too early mechanism enabling Revert "ACPI / button: Change default behavior to lid_init_state=open" ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service
2017-06-02Merge tag 'pm-4.12-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two bugs in error code paths in the cpufreq core and in the kirkwood-cpufreq driver. Specifics: - Make cpufreq_register_driver() return an error if the ->init() calls fail for all CPUs to prevent non-functional drivers from hanging around for no reason (David Arcari). - Make kirkwood-cpufreq check the return value of clk_prepare_enable() (which may fail) as appropriate (Arvind Yadav)" * tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable() cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
2017-06-02Merge tag 'random_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull /dev/random bug fix from Ted Ts'o: "Fix a race on architectures with prioritized interrupts (such as m68k) which can causes crashes in drivers/char/random.c:get_reg()" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: fix race in drivers/char/random.c:get_reg()
2017-06-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: scripts/gdb: make lx-dmesg command work (reliably) mm: consider memblock reservations for deferred memory initialization sizing mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified mlock: fix mlock count can not decrease in race condition mm/migrate: fix refcount handling when !hugepage_migration_supported() dax: fix race between colliding PMD & PTE entries mm: avoid spurious 'bad pmd' warning messages mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once pcmcia: remove left-over %Z format slub/memcg: cure the brainless abuse of sysfs attributes initramfs: fix disabling of initramfs (and its compression) mm: clarify why we want kmalloc before falling backto vmallock frv: declare jiffies to be located in the .data section include/linux/gfp.h: fix ___GFP_NOLOCKDEP value ksm: prevent crash after write_protect_page fails
generated by cgit (git 2.34.1) at 2025-09-09 08:37:49 +0000