summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-02-24sata_mv: fix pci_enable_msi() error handlingTejun Heo
intx should be turned on when pci_enable_msi() fails not when it succeeds. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-24pata_amd: fix an obvious bug in cable detectionTejun Heo
80c test mask is at bits 18 and 19 of EIDE Controller Configuration not 22 and 23. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-23USB: export autosuspend delay in sysfsAlan Stern
This patch (as861) adds sysfs attributes to expose the autosuspend delay value for each USB device. If the user changes the delay from 0 (no autosuspend) to a positive value, an autosuspend is attempted. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23sysfs: allow attributes to be added to groupsAlan Stern
This patch (as860) adds two new sysfs routines: sysfs_add_file_to_group() and sysfs_remove_file_from_group(). A later patch adds code that uses the new routines. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: make autosuspend delay a module parameterAlan Stern
This patch (as859) makes the default USB autosuspend delay a module parameter of usbcore. By setting the delay value at boot time, users will be able to prevent the system from autosuspending devices which for some reason can't handle it. The patch also stores the autosuspend delay as a per-device value. A later patch will allow the user to change the value, tailoring the delay for each individual device. A delay value of 0 will prevent autosuspend. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: minor cleanups for sysfs.cAlan Stern
This patch (as858) makes some minor cleanups to sysfs.c in usbcore. Unnecessary tests are removed and a few temp variables are added. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: add a blacklist for devices that can't handle some things we throw at them.Oliver Neukum
This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: refactor usb device matching and create usb_device_matchGreg Kroah-Hartman
This is needed for the quirk match code. Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: Wacom driver updatesPing Cheng
Updated Intuos and Graphire irq calls Report pad device ID Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23gadgetfs: Fixed bug in ep_aio_read_retry.Sarah Bailey
I don't think the current code works with multiple iovecs. The original would just copy the first part of priv->buf over and over into multiple iovecs. Signed-off-by: Sarah Bailey <saharabeara@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: Use USB defines in usbmouse.c and usbkbd.cMichael Opdenacker
The below patch proposes to use USB defines (defined in linux/hid.h) instead of just plain numbers in the USB_INTERFACE_INFO statements. Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: add rationale on why usb descriptor structures have to be packedInaky Perez-Gonzalez
Add argumentation in defense of using __attribute__((packed)) in USB descriptors authored by Dave Brownell. Necessary as in some cases it seems superfluous. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: ftdi_sio: Adding VID and PID for TellstickMicke Prag
I would like to add the VID and PID for Telldus Technologies Homeautomation usb-dongle to the ftdi_sio driver. From: Micke Prag <micke.prag@telldus.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23UHCI: Eliminate asynchronous skeleton Queue HeadersAlan Stern
This patch (as856) attempts to improve the performance of uhci-hcd by removing the asynchronous skeleton Queue Headers. They don't contain any useful information but the controller has to read through them at least once every millisecond, incurring a non-zero DMA overhead. Now all the asynchronous queues are combined, along with the period-1 interrupt queue, into a single list with a single skeleton QH. The start of the low-speed control, full-speed control, and bulk sublists is determined by linear search. Since there should rarely be more than a couple of QHs in the list, the searches should incur a much smaller total load than keeping the skeleton QHs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23UHCI: Add macros for computing DMA valuesAlan Stern
This patch (as855) adds some convenience macros to uhci-hcd, to help simplify the code for computing hardware DMA pointers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: Davicom DM9601 usbnet driverPeter Korsgaard
This patch adds a driver for the Davicom DM9601 USB 1.1 10/100Mbps ethernet adaptor using the usbnet framework. See http://www.davicom.com.tw/eng/products/dm9601.htm for details. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: asix.c - Add JVC-PRX1 idsDavid Hollis
Add device IDs for the JVC-PRX1 port replicator. Additionally cleans up the tabs on a few of other IDs in the list. Reported by: Reuben Thomas <rrt@sc3d.org> Signed-off-by: David Hollis <dhollis@davehollis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23usbmon: Remove erroneous __exitPete Zaitcev
mon_bin_exit() and mon_text_exit() are called from __init code, so don't mark them as __exit. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: add driver for iowarrior devices.Greg Kroah-Hartman
The ioctl is commented out for now, until we verify some userspace application issues. Cc: Christian Lucht <lucht@codemercs.com> Cc: Robert Marquardt <marquardt@codemercs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: option: add a bunch of new device idsGreg Kroah-Hartman
This adds all of the known Option device ids to the driver. Many thanks to some Option engineers for getting me this list. Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: option: remove duplicate device id tableGreg Kroah-Hartman
There is no need to have two tables with the same device ids in it. Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23Revert "Driver core: let request_module() send a /sys/modules/kmod/-uevent"Greg Kroah-Hartman
This reverts commit c353c3fb0700a3c17ea2b0237710a184232ccd7f. It turns out that we end up with a loop trying to load the unix module and calling netfilter to do that. Will redo the patch later to not have this loop. Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23Driver core: fix error by cleanup up symlinks properlyJames Simmons
When a device fails to register the class symlinks where not cleaned up. This left a symlink in the /sys/class/"device"/ directory that pointed to no where. This caused the sysfs_follow_link Oops I reported earlier. This patch cleanups up the symlink. Please apply. Thank you. Signed-Off: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23make kernel/kmod.c:kmod_mk staticAdrian Bunk
This patch makes the needlessly global struct kmod_mk static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23power management: fix struct layout and docsJohannes Berg
Because the pm ops in powermac are obviously not using them as intended, I added documentation for it in kernel-doc format. Reordering the fields in struct pm_ops not only makes the output of kernel-doc make more sense but also removes a hole from the structure on 64-bit platforms. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Macheck <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23power management: no valid states w/o pm_opsJohannes Berg
Change /sys/power/state to not advertise any valid states (except for disk if SOFTWARE_SUSPEND is enabled) when no pm_ops have been set so userspace can easily discover what states should be available. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Macheck <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23Driver core: more fallout from class_device changes for pcmciaManuel Lauss
More fallout from the PCMCIA class_device changes. The first hunk is run-tested on SH-4, the others are converted in the spirit of the original conversion. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23sysfs: move struct sysfs_dirent to private headerAdam J. Richter
struct sysfs_dirent is private to the fs/sysfs/ subtree. It is not even referenced as an opaque structure outside of that subtree. The following patch moves the declaration from include/linux/sysfs.h to fs/sysfs/sysfs.h, making it clearer that nothing else in the kernel dereferences it. I have been running this patch for years. Please integrate and forward upstream if there are no objections. From: "Adam J. Richter" <adam@yggdrasil.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23driver core: refcounting fixMike Galbraith
Fix a reference counting bug exposed by commit 725522b5453dd680412f2b6463a988e4fd148757. If driver.mod_name exists, we take a reference in module_add_driver(), and never release it. Undo that reference in module_remove_driver(). Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23Driver core: remove class_device_renameGreg Kroah-Hartman
No one uses it, and it wasn't exported to modules, so remove it. The only other user of it was the network code, which is now converted to use struct device instead. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23RDMA/cxgb3: Stop the EP Timer on BAD CLOSESteve Wise
Stop the ep timer in ec_status() if the status indicates a bad close. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-23RDMA/cxgb3: cleanupsAdrian Bunk
- don't mark static functions in C files as inline - gcc should know best whether inlining makes sense - never compile the unused cxio_dbg.c - make the following needlessly global functions static: - cxio_hal.c: cxio_hal_clear_qp_ctx() - iwch_provider.c: iwch_get_qp() - remove the following unused global functions: - cxio_hal.c: cxio_allocate_stag() - cxio_resource.: cxio_hal_get_rhdl() - cxio_resource.: cxio_hal_put_rhdl() Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-23[libata] ata_piix: remove duplicate PCI IDsJeff Garzik
Duplicate ids noticed by Kay Sievers <kay.sievers@suse.de> Although 100% different, this is based on a patch by Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-23sata_nv: complain on spurious completion notifiersRobert Hancock
Recently Tejun wrote a patch to ahci.c to make it raise a HSM violation if the drive attempted to complete a tag that wasn't outstanding. We could run into the same problem with sata_nv ADMA. This adds code to raise a HSM violation error if the controller gives us a notifier tag that isn't outstanding, since the drive may be issuing spurious completions. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-23libata: test major version in ata_id_is_sata()Tejun Heo
Test major version in ata_id_is_sata() not separately. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-23sata_nv: kill old private BMDMA helper functionsRobert Hancock
sata_nv implemented its own copies of the BMDMA helper functions for ADMA, since the ADMA BMDMA status registers are PIO while the other registers are MMIO, and this was the only way to handle this previously. Now that we have iomap support, the standard routines should just work, so use them. The only thing we need to override as far as ADMA and BMDMA is the post_internal_cmd callback, where we should only call ata_post_internal_cmd if we are in port-register mode. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-23libata: fix remaining ap->idTejun Heo
Merge order left libata-acpi and pata_scc with remainling usage of ap->id. Kill superflous id printing and substitute the remaining ones with ap->print_id. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-23ahci: consider SDB FIS containing spurious NCQ completions HSM violation ↵Tejun Heo
(regenerated) SDB FIS containing spurious NCQ completions is a clear protocol violation. Currently, only some Maxtors with early firmware revisions are showing this problem. Those firmwares have other NCQ related problems including buggy NCQ error reporting and occasional lock up after NCQ errors. Consider spurious NCQ completions HSM violation and freeze the port after it. EH will turn off NCQ after this happens several times. Eventually drives which show this behavior should be blacklisted for NCQ. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-22RDMA/cma: Remove unused node_guid from cma_device structureSean Hefty
Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22IB/cm: Remove ca_guid from cm_device structureSean Hefty
The cm_device references an ib_device, which already contains the node_guid. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22RDMA/cma: Request reversible paths onlySean Hefty
The rdma_cm requires that path records be reversible. Set the reversible bit when issuing an path record query. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22IB/core: Set hop limit in ib_init_ah_from_wc correctlySean Hefty
The hop_limit value in the ah_attr should be 0xFF, not the value read from the received GRH (which should be 0). See 13.5.4.4 in the 1.2 IB spec. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22[CPUFREQ] constify some data tables.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-22[CPUFREQ] constify cpufreq_driver where possible.Dave Jones
Not all cases are possible due to ->flags being set at runtime on some drivers. Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-22[AGPGART] Further constification.Dave Jones
Make agp_bridge_driver->aperture_sizes and ->masks const. Also agp_bridge_data->driver Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-22IB/uverbs: Return correct error for invalid PD in register MRRoland Dreier
If no matching PD is found in ib_uverbs_reg_mr(), then the function jumps to err_release without setting the return value ret. This means that ret will hold the return value of the call to ib_umem_get() a few lines earlier; if the function reaches the point where it looks for the PD, we know that ib_umem_get() must have returned 0, so ib_uverbs_reg_mr() ends up return 0 for a bad PD ID. Fix this by setting ret to -EINVAL before jumping to the exit path when no PD is found. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22[ARM] 4232/1: AT91: Generic GPIO bugAndrew Victor
The new gpio_direction_input() and gpio_direction_output() functions were both enabling output mode. When configuring a GPIO for input mode, you need to program the ODR (Output Disable Register). Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-22[ARM] 4231/1: AT91: Merge and typo fixes.Andrew Victor
The duplicate file "include/asm-arm/arch-at91rm9200/entry-macro.S" can be removed - it was already moved to include/asm-arm/arch-at91/. Fix 3 small typo's - two in comments, and the incorrect clock was specified for the LCD device. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-22[ARM] 4229/1: S3C2410: Add MACH_QT2410 to s3c2410_defconfigBen Dooks
Add the Armzone QT2410 to the list of built machines in the s3c2410_defconfig Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-22[ARM] 4228/2: S3C24XX: update s3c2410_defconfig for 2.6.21-rc1Ben Dooks
Udpate s3c2410_defconfig for 2.6.21-rc1 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-11 06:04:08 +0000