summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-02-17[WATCHDOG] machzwd warning fixAndrew Morton
From: Andrew Morton <akpm@linux-foundation.org> drivers/char/watchdog/machzwd.c: In function 'zf_ioctl': drivers/char/watchdog/machzwd.c:327: warning: passing argument 1 of 'zf_ping' makes integer from pointer without a cast Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-17Remove JFFS (version 1), as scheduled.Jeff Garzik
Unmaintained for years, few if any users. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Hostess SV-11 depends on INETBaruch Even
Comtrol Hostess SV-11 driver uses features from INET but doesn't depend on it. The simple solution is to make it depend on INET as happens for the sealevel driver. Fixes bug #7930. Signed-Off-By: Baruch Even <baruch@ev-en.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Fix link autonegotiation timer.Ralf Baechle
Start link negotiation in the open method. Previously it was started on driver initialialization and shutdown on close so an ifdown would have results in closing negotiation for good. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sk98lin: planned removalStephen Hemminger
Nag message about planned sk98lin removal. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17B44: increase wait loopGary Zambrano
The b44 Enet control disable bit may take longer to clear on some systems, so the loop count is increased with this patch. Functionality is not compromised, but a debug message can be seen when the bit is not cleared within the count value. Thanks to Vasileios Lourdas who reported the problem. Signed-off by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17b44: replace defineGary Zambrano
Replaced B44_DMA_MASK with DMA_30BIT_MASK. Signed-off by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17e1000: allow ethtool to see link status when downKok, Auke
By reading the MAC status register we can detect whether the MAC has seen the PHY see link. This allows us to show the link properties before the device is up in ethtool. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17e1000: remove obsolete custom pci_save_state codeKok, Auke
Now that 2.6.19 provides a proper implementation that saves MSI, PCI-E config space, we can have the e1000 driver use those instead of it's custom implementation. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17e1000: fix shared interrupt warning messageKok, Auke
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atm: Use ARRAY_SIZE macro when appropriateAhmed S. Darwish
Use ARRAY_SIZE macro already defined in kernel.h for ATM drivers. Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: chas williams <chas@cmf.nrl.navy.mil> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17bugfixes and new hardware support for arcnet driverJeff Morrow
The modifications and bug fixes noted below were done by Realtime Control Works and Contemporary Control Systems, Inc, Jan 2005. They were incorporated into the 2.6 kernel by Jeff Morrow of Sierra Analytics, Feb 2007. <jmorrow@massspec.com> The changes have been tested on a Contemporary Controls PCI20U-4000. Summary of changes: Arc-rawmode.c: rx(): - Fixed error in received packet lengths; 256 byte packets were being received as 257 bytes packets. prepare_tx(): - Fixed error in transmit length calcs; 257 byte packets were being transmitted as 260 byte packets. com20020.c: com20020_check(): - We now load the SETUP2 register if the 'clockm' parameter is non-zero, instead of checking for ARC_CAN_10MBIT. The user is now responsible for whether or not SETUP2 is loaded. If the clock multiplier is non-zero, this means that the user wants a baud rate greater than 2.5Mbps. This is not possible unless the SETUP2 register is present (COM20020D, or COM20022). So, we're relying on the user to be smart about what kind of chip he's dealing with... com20020-pci.c - Added several entries to com20020pci_id_table[]. Signed-off-by: Jeff Morrow <jmorrow@massspec.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17pcnet32 NAPI no longer experimentalpcnet32@verizon.net
Remove the experimental tag for the pcnet32 NAPI implementation. Signed-off-by: Don Fry <pcnet32@verizon.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17MAINTAINERpcnet32@verizon.net
After being the defacto maintainer for a couple of years, I can now become the official maintainer. Signed-off-by: Don Fry <pcnet32@verizon.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17macb: Remove inappropriate spinlocks around mii callsHaavard Skinnemoen
Remove spin_lock_irqsave() around mii_ethtool_gset, mii_ethtool_sset and generic_mii_ioctl. These are unnecessary and harmful because the mii calls may call back into the mdio functions, which may sleep. Pointed out by David Brownell. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Convert meth to netdev_privRalf Baechle
And while at it loose plenty of useless casts. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: v1.13Stephen Hemminger
New version. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: receive error handling improvementsStephen Hemminger
Don't drop oversize frame it might be a VLAN (untagged). Use different counter for fifo overrun vs fifo error. Print error on fifo overrrun. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: transmit timeoutStephen Hemminger
The transmit timeout code could hang, and it would not clear out problems if the hardware was stuck. Change the code to effectively do a device down/up similar to the suspend/resume code. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: flow control negotiation for Yukon-FEStephen Hemminger
The Yukon-FE chip doesn't do gigabit and has a differen PHY internally. On this chip, phy status register doesn't properly reflect the result of flow control negotiation. To workaround the problem and avoid having to have so much chip dependent code; compute the result of flow control by looking at the local and remote advertised bits. Signed-off-by: Stephen Hemmminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: no need to reset pause bits on shutdownStephen Hemminger
Resetting the pause bits on shutdown is not necessary. The code was inherited from the vendor driver, and it is currently #ifdef'd out there as well. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: dont flush good pause framesStephen Hemminger
Don't mark pause frames as errors. This problem caused transmitter not to pause and would effectively take out a gigabit switch because the it can't handle overrun. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17cxgb3 Fix copyrights in the cxgb3 driver.Steve Wise
Fix copyrights in the cxgb3 driver. Remove the Open Grid Computing copyright. It shouldn't be there. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17gianfar: don't duplicate gfar_error()Sergei Shtylyov
It was hardly necessary to repeat most of the code from gfar_error() in gfar_interrupt(), especially having some inconsistencies between the two. So, make the gfar_interrupt() just call gfar_error(), and not acknowledge the interrupts itself as gfar_{receive/transmit/error}() do it anyway. While at it, also clarify/cleanup debug messages in gfar_error()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17NetXen: Fix to get the driver working after sparse changesAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17net/wan/pc300too.c: pci_module_init to pci_register_driverRichard Knutsson
Convert pci_module_init() to pci_register_driver(). Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: bump version numberJay Cliburn
Bump the version number. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: add L1 device id to pci_ids, then use itChris Snook
Add device id for the Attansic L1 chip to pci_ids.h, then use it. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: remove unused defineChris Snook
Remove unused define from atl1_main.c. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: read MAC address from registerJay Cliburn
On some Asus motherboards containing the L1 NIC, the MAC address is written by the BIOS directly to the MAC register during POST, and is not stored in eeprom. If we don't succeed in fetching the MAC address from eeprom or spi, try reading it directly from the MAC register. Suggested by Xiong Huang. And do some cleanup while we've got the hood up... Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: fix bad ioread addressAl Viro
An ioread32 statement reads the wrong address. Fix it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: drop NET_PCI from KconfigJay Cliburn
The atl1 driver doesn't need NET_PCI. Remove it from Kconfig. Noticed by Chad Sprouse. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17PCMCIA-NETDEV : the 2nd argument of el3_interrrupt and smc_interrupt is ↵Komuro
struct net_device* Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17phylib: Add support for Marvell 88e1111S and 88e1145Andy Fleming
Changes include: * New support for 88e1145 * New support for 88e111s * Fixing 88e1101 driver to not match non-88e1101 PHYs * Increases in feature support across Marvell PHY product line * Fixes a bunch of whitespace issues found by Lindent Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Merge branch 'master' into upstreamJeff Garzik
2007-02-17Merge branch 'gfar' of ↵Jeff Garzik
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into upstream
2007-02-17Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale treesRussell King
2007-02-17[ARM] 4211/1: Provide a defconfig for ns9xxxUwe Kleine-König
This is a follow up for the patch providing the base support for the ns9xxx machine type. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4210/1: base for new machine type "NetSilicon NS9360"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PMBen Dooks
S3C2443_PM is not defined in our Kconfig, so remove the reference from CPU_S3C2443 to stop the configuration process warning about it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17Documentation/kernel-docs.txt update.James Nelson
Signed-off-by: James Nelson <james4765@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17arch/cris: typo in KERN_INFONicolas Kaiser
Typo in KERN_INFO. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17kernel/printk.c: comment fixPatrick Pletscher
Signed-off-by: Patrick Pletscher <pat@pletscher.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17update I/O sched Kconfig help texts - CFQ is now default, not AS.Jesper Juhl
Change I/O scheduler description to correctly show CFQ as being the default scheduler and not the anticipatory scheduler that previously was default. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17Remove duplicate listing of Cris arch from READMEJesper Juhl
Mikael Pettersson pointed out to me that a recent patch of mine (commit 620034c84d1d939717bdfbe02c51a3fee43541c3), that made some corrections to the README file, accidentally listed the Cris architecture twice. Whoops. This patch removes the duplicate. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17kbuild: more doc. cleanupsRandy Dunlap
Fix typos/spellos in kbuild/makefiles.txt. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17doc: make doc. for maxcpus= more visibleRandy Dunlap
Some people are confused about maxcpus=1 and maxcpus=0, so put the documentation text from init/main.c into Documentation/kernel-parameters.txt also. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17drivers/net/eexpress.c: remove duplicate commentShane Shrybman
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17add a help text for BLK_DEV_GENERICJohn Daiker
This fixes kernel Bugzilla #4933. Signed-off-by: Adrian Bunk <bunk@stusta.de>
generated by cgit (git 2.34.1) at 2025-09-14 04:04:35 +0000