| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Also remove extraneous irq disabling in flush_cache_all() callstack
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
* Number of (i|d)cache ways can be retrieved from BCRs and hence no need
to cross check with with built-in constants
* Use of IS_ENABLED() to check for a Kconfig option
* is_not_cache_aligned() not used anymore
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Cause codes are same for D-TLB-Miss and Prot-V
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
* Move the various sub-system defines/types into relevant files/functions
(reduces compilation time)
* move CPU specific stuff out of asm/tlb.h into asm/mmu.h
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
This fixes the following:
- CONFIG_ARC_SERIAL_BAUD is only defined when CONFIG_SERIAL_ARC is defined.
Make sure that it isn't referenced otherwise.
- There is no use for initializing arc_uart_info[] when CONFIG_SERIAL_ARC is
not defined.
[vgupta: tweaked changelog title, used IS_ENABLED() kconfig helper]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
dump_seek() does SEEK_CUR, not SEEK_SET; native binfmt_aout
handles it correctly (seeks by PAGE_SIZE - sizeof(struct user),
getting the current position to PAGE_SIZE), compat one seeks
by PAGE_SIZE and ends up at PAGE_SIZE + already written...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This patch fixes the below compile warning:
drivers/base/firmware_class.c:1254:12: warning: 'cache_firmware' defined
but not used [-Wunused-function]
static int cache_firmware(const char *fw_name)
^
drivers/base/firmware_class.c:1281:12: warning: 'uncache_firmware'
defined but not used [-Wunused-function]
static int uncache_firmware(const char *fw_name)
^
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for the TI-Nspire platform.
Changes between v1 and v2:
* Added GENERIC_IRQ_CHIP to platform Kconfig
Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch adds device trees for describing the TI-Nspire hardware.
Changes between v1 and v2:
* Change "keymap" binding to the standard "linux,keymap" binding.
Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into next/soc
From Jason Cooper:
mvebu register map changes for v3.11 (round 2)
This series removes the hardcoded register base address for mvebu.
For round 2:
- multiplatform
- fix booting on anything other than mvebu
Depends (none new for round 2):
- mvebu/fixes-non-critical (up to tags/fixes-non-3.11-1)
- mvebu/cleanup (up to tags/cleanup-3.11-3)
* tag 'regmap-3.11-2' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: fix coherency_late_init() for multiplatform
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
next/dt
From Jason Cooper:
mvebu dt changes for v3.11 (round 6)
- mvebu
- mini-PCIe connectors on Armada 370 RD
- kirkwood
- correct internal register ranges translation
* tag 'dt-3.11-6' of git://git.infradead.org/users/jcooper/linux:
ARM: Kirkwood: Fix the internal register ranges translation
arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"This series fixes a couple of build failures, and fixes MTRR cleanup
and memory setup on very specific memory maps.
Finally, it fixes triggering backtraces on all CPUs, which was
inadvertently disabled on x86."
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Fix dummy variable buffer allocation
x86: Fix trigger_all_cpu_backtrace() implementation
x86: Fix section mismatch on load_ucode_ap
x86: fix build error and kconfig for ia32_emulation and binfmt
range: Do not add new blank slot with add_range_with_merge
x86, mtrr: Fix original mtrr range get for mtrr_cleanup
|
|
Pull drm radeon fixes from Dave Airlie:
"One core fix, but mostly radeon fixes for s/r and big endian UVD
support, and a fix to stop the GPU being reset for no good reason, and
crashing people's machines."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: update lockup tracking when scheduling in empty ring
drm/prime: Honor requested file flags when exporting a buffer
drm/radeon: fix UVD on big endian
drm/radeon: fix write back suspend regression with uvd v2
drm/radeon: do not try to uselessly update virtual memory pagetable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
- Fix for a regression causing a failure to turn on some devices on
some systems during initialization introduced by a recent revert of
an ACPI PM change that broke something else. Fortunately, we know
exactly what devices are affected, so we can add a fix just for them
leaving everyone else alone.
- ACPI power resources initialization fix preventing a NULL pointer
from being dereferenced in the acpi_add_power_resource() error code
path.
- ACPI dock station driver fix that adds missing locking to
write_undock().
- ACPI resources allocation fix changing the scope of an old workaround
so that it doesn't affect systems that aren't actually buggy. This
was reported a couple of days ago to fix DMA problems on some new
platforms so we need it in -stable. From Mika Westerberg.
* tag 'acpi-3.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / LPSS: Power up LPSS devices during enumeration
ACPI / PM: Fix error code path for power resources initialization
ACPI / dock: Take ACPI scan lock in write_undock()
ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources
|
|
Pull KVM fixes from Paolo Bonzini:
"Three one-line fixes for my first pull request; one for x86 host, one
for x86 guest, one for PPC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86: kvmclock: zero initialize pvclock shared memory area
kvm/ppc/booke: Delay kvmppc_lazy_ee_enable
KVM: x86: remove vcpu's CPL check in host-invoked XCR set
|
|
Pull crypto fix from Herbert Xu:
"This fixes an unaligned crash in XTS mode when using aseni_intel"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: aesni_intel - fix accessing of unaligned memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fix from Sage Weil:
"This fixes a problem preventing the kernel and userland librbd
libraries from sharing data with the new format 2 images"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: use the correct length for format 2 object names
|
|
Although the internal register window size is 1 MiB, the previous
ranges translation for the internal register space had a size of
0x4000000. This was done to allow the crypto and nand node to access
the corresponding 'sram' and 'nand' decoding windows.
In order to describe the hardware more accurately, we declare the
real 1 MiB internal register space in the ranges, and add a translation
entry for the nand node to access the 'nand' window.
This commit will make future improvements on the MBus DT binding easier.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
The following commit:
commit 7e348b9012522fa0efd854d20d210d5e57fcedd1
Author: Robert Lee <rob.lee@linaro.org>
Date: Tue Mar 20 15:22:43 2012 -0500
ARM: at91: Consolidate time keeping and irq enable
Enable core cpuidle timekeeping and irq enabling and remove that
handling from this code.
introduced an additional zero to the state1 (suspend) target residency.
With a periodic tick, the cpu never enters the state1 with both 10000 and
100000.
With a tickless system, it enters to state1 much more often with the
initial value, roughly x7 more.
Fix it by setting the value to 10ms again.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[nicola.ferre@atmel.com: add precisions given by Daniel to commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
Since 4b68520dc0ec96153bc0d87bca5ffba508edfcf
ARM: at91: add AIC5 support
we allocate the at91_extern_irq.
This patch makes it static and stores the non-dt extern irq in the soc
structure. It is then possible to use a at91_get_extern_irq() function
to get the value for outside of the irq driver. It is useful for passing
its value to at91_aic_init().
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: rework commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
Compiling without CONFIG_X86_LOCAL_APIC set, apic.c will not be
compiled, and the irq tracepoints will not be created via the
CREATE_TRACE_POINTS macro. When CONFIG_X86_LOCAL_APIC is not set,
we get the following build error:
LD init/built-in.o
arch/x86/built-in.o: In function `trace_x86_platform_ipi_entry':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:66: undefined reference to `__tracepoint_x86_platform_ipi_entry'
arch/x86/built-in.o: In function `trace_x86_platform_ipi_exit':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:66: undefined reference to `__tracepoint_x86_platform_ipi_exit'
arch/x86/built-in.o: In function `trace_irq_work_entry':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:72: undefined reference to `__tracepoint_irq_work_entry'
arch/x86/built-in.o: In function `trace_irq_work_exit':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:72: undefined reference to `__tracepoint_irq_work_exit'
arch/x86/built-in.o:(__jump_table+0x8): undefined reference to `__tracepoint_x86_platform_ipi_entry'
arch/x86/built-in.o:(__jump_table+0x14): undefined reference to `__tracepoint_x86_platform_ipi_exit'
arch/x86/built-in.o:(__jump_table+0x20): undefined reference to `__tracepoint_irq_work_entry'
arch/x86/built-in.o:(__jump_table+0x2c): undefined reference to `__tracepoint_irq_work_exit'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2
As irq.c is always compiled for x86, it is a more appropriate location
to create the irq tracepoints.
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
next/boards
From Michal Simek:
arm: Xilinx Zynq defconfig changes for v3.11
Enable zynq uartps driver and initrd in defconfig.
* tag 'zynq-defconfig-for-3.11' of git://git.xilinx.com/linux-xlnx:
arm: multi_v7_defconfig: Enable initrd/initramfs support
arm: multi_v7_defconfig: Enable Zynq UART driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://github.com/broadcom/bcm11351 into next/cleanup
From Christian Daudt:
* 'armsoc/for-3.11/cleanups' of git://github.com/broadcom/bcm11351:
ARM: bcm281xx: Remove init_irq declaration in machine description
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
next/dt
From Christian Daudt:
* 'armsoc/for-3.11/dt' of git://github.com/broadcom/bcm11351:
ARM: dts: bcm281xx: change comment to C89 style
ARM: mmc: bcm281xx SDHCI driver (dt mods)
ARM: dts: bcm281xx: use existing defines for irqs
ARM: dts: bcm281xx: use #include for device tree files
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
From Simon Horman:
Second Round of Renesas ARM-based SoC DT updates for v3.11
* Increased DT coverage for renesas-intc-irqpin
by Guennadi Liakhovetski
* Clean up of address format used in sh73a0 dtsi file
by Guennadi Liakhovetski
* tag 'renesas-dt2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: irqpin: add a DT property to enable masking on parent
ARM: shmobile: sh73a0: remove "0x" prefix from DT node names
irqchip: renesas-intc-irqpin: DT binding for sense bitfield width
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
From Simon Horman:
Second Round of Renesas ARM based SoC GPIO R-Car updates for v3.11
Documentation enhancement and code cleanup by Laurent Pinchart.
* tag 'renesas-gpio-rcar2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
gpio-rcar: Reference core gpio documentation in the DT bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
From Simon Horman:
Second Round of Renesas ARM based SoC pinmux and GPIO update for v3.11
tidyup MMC_D1 pin for r8a7778 SoC
fix two pin numbers and add HSCIF pin groups to r8a7790 SoC
add pinmux data for MMCIF and SDHI interfaces for r8a73a4 SoC
* tag 'renesas-pinmux2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
sh-pfc: r8a7778: tidyup MMC_D1 pin
pinctrl: r8a7790: fix two pin numbers
sh-pfc: r8a7790: add HSCIF pin groups
pinctrl: r8a73a4: add pinmux data for MMCIF and SDHI interfaces
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
From Simon Horman:
Second Round of Renesas ARM-based SoC board updates for v3.11
* Extended hardware coverage for the Bock-W board
by Goda-san and Morimoto-san
* Correction to Ether device name for the Bock-W board
from Sergei Shtylyov
* tag 'renesas-boards2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: BOCK-W: change Ether device name
ARM: shmobile: bockw: add MMCIF support
ARM: shmobile: bockw: add SPI FLASH support
ARM: shmobile: bockw: add I2C device support
ARM: shmobile: BOCK-W: add Ether support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
From Kukjin Kim:
based on tags/common-clk-audio
- add support for exynos5420 SoC
* tag 'soc-exynos5420-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: extend soft-reset support for EXYNOS5420
ARM: EXYNOS: add secondary CPU boot base location for EXYNOS5420
clocksource: exynos_mct: use (request/free)_irq calls for local timer registration
ARM: dts: Add initial device tree support for EXYNOS5420
clk: exynos5420: register clocks using common clock framework
ARM: EXYNOS: use four additional chipid bits to identify EXYNOS family
serial: samsung: select EXYNOS specific driver data if ARCH_EXYNOS is defined
ARM: EXYNOS: Add support for EXYNOS5420 SoC
ARM: dts: list the CPU nodes for EXYNOS5250
ARM: dts: fork out common EXYNOS5 nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
From Simon Horman:
Renesas ARM based SoC boot cleanup for v3.11
Work by Magnus Damm and others to clean up the boot of and move
things closer to supporting multi-arch.
As a side effect of this work it was decided to remove support for
two boards, Bonito and AP4EVB. Those patches are included in this
series as they depend on earlier patches in the series.
* tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove Bonito board support
ARM: shmobile: Remove AP4EVB board support
ARM: shmobile: Remove mach/memory.h
ARM: shmobile: Remove MEMORY_START/SIZE
ARM: shmobile: Enable ARM_PATCH_PHYS_VIRT
ARM: shmobile: Remove old SCU boot code
ARM: shmobile: EMEV2 SMP with SCU boot fn and args
ARM: shmobile: sh73a0 SMP with SCU boot fn and args
ARM: shmobile: r8a7779 SMP with SCU boot fn and args
ARM: shmobile: Add SCU boot function using argument
ARM: shmobile: Add SMP boot function and argument
ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys()
ARM: shmobile: Remove romImage CONFIG_MEMORY_START
ARM: shmobile: Let romImage rely on default ATAGS
ARM: shmobile: uImage load address rework
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late
From Simon Horman:
Renesas ARM based SoC cleanups for v3.11
__initdata annotations for the r8a7790 SoC by Morimoto-san.
* tag 'renesas-cleanup-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (158 commits)
ARM: shmobile: r8a7790: add __initdata on resource and device data
Based on 'renesas-pinmux-for-v3.11' and 'renesas-soc-for-v3.11
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Patches from Lee Jones:
This gets rid of mop500_snowball_ethernet_clock_enable() which is no
longer in use. It also straightens out a bug which ensures the SMSC911x's
regulator is turned on at start-up when using Device Tree.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
mop500_snowball_ethernet_clock_enable() provided a means to enable a
clock which was used for the SMSC911x Ethernet device on Snowball. It
was merely a stand-in until the driver was common clk compliant. Now
that it is, this can be removed for both DT and ATAGs booting.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When this node was added, the AB8500 GPIO driver was pretty broken.
As a hack, we pretended that NOMADIK GPIO 26 was the correct on/off
pin, as it was unused. It worked because AB8500 GPIO 26 was in an
'always on from boot' state. Now the AB8500 GPIO driver is working,
the default state for all the pins is 'off'. Let's flip back over to
use the correct GPIO which is _actually_ attached to the regulator.
We're also taking the opportunity to straighten out some formatting
misdemeanours, swapping spaces for tabs.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Here we're adding a node for the AB8500 GPIO device. This will allow
other DT:ed components to obtain GPIOs for use within their drivers.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The recent modification in the cpuidle framework consolidated the
timer broadcast code across the different drivers by setting a new
flag in the idle state. It tells the cpuidle core code to enter/exit
the broadcast mode for the cpu when entering a deep idle state. The
broadcast timer enter/exit is no longer handled by the back-end
driver.
This change made the local interrupt to be enabled *before* calling
CLOCK_EVENT_NOTIFY_EXIT.
On a tegra114, a four cores system, when the flag has been introduced
in the driver, the following warning appeared:
WARNING: at kernel/time/tick-broadcast.c:578 tick_broadcast_oneshot_control
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.10.0-rc3-next-20130529+ #15
[<c00667f8>] (tick_broadcast_oneshot_control+0x1a4/0x1d0) from [<c0065cd0>] (tick_notify+0x240/0x40c)
[<c0065cd0>] (tick_notify+0x240/0x40c) from [<c0044724>] (notifier_call_chain+0x44/0x84)
[<c0044724>] (notifier_call_chain+0x44/0x84) from [<c0044828>] (raw_notifier_call_chain+0x18/0x20)
[<c0044828>] (raw_notifier_call_chain+0x18/0x20) from [<c00650cc>] (clockevents_notify+0x28/0x170)
[<c00650cc>] (clockevents_notify+0x28/0x170) from [<c033f1f0>] (cpuidle_idle_call+0x11c/0x168)
[<c033f1f0>] (cpuidle_idle_call+0x11c/0x168) from [<c000ea94>] (arch_cpu_idle+0x8/0x38)
[<c000ea94>] (arch_cpu_idle+0x8/0x38) from [<c005ea80>] (cpu_startup_entry+0x60/0x134)
[<c005ea80>] (cpu_startup_entry+0x60/0x134) from [<804fe9a4>] (0x804fe9a4)
I don't have the hardware, so I wasn't able to reproduce the warning
but after looking a while at the code, I deduced the following:
1. the CPU2 enters a deep idle state and sets the broadcast timer
2. the timer expires, the tick_handle_oneshot_broadcast function is
called, setting the tick_broadcast_pending_mask and waking up the
idle cpu CPU2
3. the CPU2 exits idle handles the interrupt and then invokes
tick_broadcast_oneshot_control with CLOCK_EVENT_NOTIFY_EXIT which
runs the following code:
[...]
if (dev->next_event.tv64 == KTIME_MAX)
goto out;
if (cpumask_test_and_clear_cpu(cpu,
tick_broadcast_pending_mask))
goto out;
[...]
So if there is no next event scheduled for CPU2, we fulfil the
first condition and jump out without clearing the
tick_broadcast_pending_mask.
4. CPU2 goes to deep idle again and calls
tick_broadcast_oneshot_control with CLOCK_NOTIFY_EVENT_ENTER but
with the tick_broadcast_pending_mask set for CPU2, triggering the
warning.
The issue only surfaced due to the modifications of the cpuidle
framework, which resulted in interrupts being enabled before the call
to the clockevents code. If the call happens before interrupts have
been enabled, the warning cannot trigger, because there is still the
event pending which caused the broadcast timer expiry.
Move the check for the next event below the check for the pending bit,
so the pending bit gets cleared whether an event is scheduled on the
cpu or not.
[ tglx: Massaged changelog ]
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reported-and-tested-by: Joseph Lo <josephl@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/1371485735-31249-1-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
* Don't leak random kernel memory to EFI variable NVRAM when attempting
to initiate garbage collection. Also, free the kernel memory when
we're done with it instead of leaking - Ben Hutchings
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
ACPI part of the driver accidentally used sizeof(*ssp) instead of the
correct sizeof(*pdata). This leads to nasty memory corruptions like the one
below:
BUG: unable to handle kernel paging request at 0000000749fd30b8
IP: [<ffffffff813fe8a1>] __list_del_entry+0x31/0xd0
PGD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 3.10.0-rc6v3.10-rc6_sdhci_modprobe+ #443
task: ffff8801483a0940 ti: ffff88014839e000 task.ti: ffff88014839e000
RIP: 0010:[<ffffffff813fe8a1>] [<ffffffff813fe8a1>] __list_del_entry+0x31/0xd0
RSP: 0000:ffff88014839fde8 EFLAGS: 00010046
RAX: ffff880149fd30b0 RBX: ffff880149fd3040 RCX: dead000000200200
RDX: 0000000749fd30b0 RSI: ffff880149fd3058 RDI: ffff88014834d640
RBP: ffff88014839fde8 R08: ffff88014834d640 R09: 0000000000000001
R10: ffff8801483a0940 R11: 0000000000000001 R12: ffff880149fd3040
R13: ffffffff810e0b30 R14: ffff8801483a0940 R15: ffff88014834d640
FS: 0000000000000000(0000) GS:ffff880149e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000168 CR3: 0000000001e0b000 CR4: 00000000001407f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
ffff88014839fe48 ffffffff810e0baf ffffffff81120abd ffff88014839fe20
ffff8801483a0940 ffff8801483a0940 ffff8801483a0940 ffff8801486b1c90
ffff88014834d640 ffffffff810e0b30 0000000000000000 0000000000000000
Call Trace:
[<ffffffff810e0baf>] worker_thread+0x7f/0x390
[<ffffffff81120abd>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff810e0b30>] ? manage_workers.isra.22+0x2b0/0x2b0
[<ffffffff810e6c09>] kthread+0xd9/0xe0
[<ffffffff810f93df>] ? local_clock+0x3f/0x50
[<ffffffff810e6b30>] ? kthread_create_on_node+0x110/0x110
[<ffffffff818c5dec>] ret_from_fork+0x7c/0xb0
[<ffffffff810e6b30>] ? kthread_create_on_node+0x110/0x110
Fix this by using the right structure size in devm_kzalloc().
Reported-by: Jerome Blin <jerome.blin@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org # 3.9+
|
|
1. Check for allocation failure
2. Clear the buffer contents, as they may actually be written to flash
3. Don't leak the buffer
Compile-tested only.
[ Tested successfully on my buggy ASUS machine - Matt ]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
From Heiko Stuebner:
Adds basic support for Rockchip Cortex-A9 SoCs.
* tag 'v3.11-rockchip-basics' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm: add basic support for Rockchip RK3066a boards
arm: add debug uarts for rockchip rk29xx and rk3xxx series
arm: Add basic clocks for Rockchip rk3066a SoCs
clocksource: dw_apb_timer_of: use clocksource_of_init
clocksource: dw_apb_timer_of: select DW_APB_TIMER
clocksource: dw_apb_timer_of: add clock-handling
clocksource: dw_apb_timer_of: enable the use the clocksource as sched clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This adds a generic devicetree board file and a dtsi for boards
based on the RK3066a SoCs from Rockchip.
Apart from the generic parts (gic, clocks, pinctrl) the only components
currently supported are the timers, uarts and mmc ports (all DesignWare-
based).
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Olof Johansson <olof@lixom.net>
|
|
Uarts on all recent Rockchip SoCs are Synopsis DesignWare 8250 types.
Only their addresses vary very much.
This patch adds the necessary definitions to use any of the uart ports
for early debug purposes.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This adds a basic clock setup for rk3066a SoCs. Only the gates are
set up currently, as the mux and dividers should use the upcoming
generic devicetree bindings.
Clocks whose rates need to be known are supplied by fixed-rate
"dummy"-clocks that provide the correct rate. This is uncritical insofar
that the only bootloader currently in existence for Rockchip devices
is the propietary Rockchip one that always setups the clocks in the
necessary way.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
|
|
Add CONFIG_BLK_DEV_INITRD to the defconfig to support
initramfs and initrd.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
[Purpose of this patch]
As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.
http://www.spinics.net/lists/mm-commits/msg85707.html
<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled. They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.
There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers. Tracing such events gives
us the information about IRQ interaction with other system events.
The trace also tells where the system is spending its time. We want to
know which cores are handling interrupts and how they are affecting other
processes in the system. Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>
On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.
I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.
[Patch Description]
Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.
So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
- local_timer_vector
- reschedule_vector
- call_function_vector
- call_function_single_vector
- irq_work_entry_vector
- error_apic_vector
- thermal_apic_vector
- threshold_apic_vector
- spurious_apic_vector
- x86_platform_ipi_vector
Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
- Create trace irq handlers with entering_irq()/exiting_irq().
- Create a new IDT, trace_idt_table, at boot time by adding a logic to
_set_gate(). It is just a copy of original idt table.
- Register the new handlers for tracpoints to the new IDT by introducing
macros to alloc_intr_gate() called at registering time of irq_vector handlers.
- Add checking, whether irq vector tracing is on/off, into load_current_idt().
This has to be done below debug checking for these reasons.
- Switching to debug IDT may be kicked while tracing is enabled.
- On the other hands, switching to trace IDT is kicked only when debugging
is disabled.
In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
|
|
Rename variables for debugging to describe meaning of them precisely.
Also, introduce a generic way to switch IDT by checking a current state,
debug on/off.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323A8.7050905@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
|
