summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-15PCI/AER: Use 32 bit PCI domain numbersKeith Busch
The Intel Volume Management Device (VMD) supports 32-bit domain numbers. To accommodate this, use u32 instead of u16 to store domain numbers. [bhelgaas: changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-15x86/PCI: Allow DMA ops specific to a PCI domainKeith Busch
The Intel Volume Management Device (VMD) is a PCIe endpoint that acts as a host bridge to another PCI domain. When devices below the VMD perform DMA, the VMD replaces their DMA source IDs with its own source ID. Therefore, those devices require special DMA ops. Add interfaces to allow the VMD driver to set up dma_ops for the devices below it. [bhelgaas: remove "extern", add "static", changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-15irqdomain: Export irq_domain_set_info() for module useKeith Busch
Export irq_domain_set_info() for module use. It will be used by the Volume Management Device driver. [bhelgaas: changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-15Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF fixes and quota cleanups from Jan Kara: "Several UDF fixes and some minor quota cleanups" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Check output buffer length when converting name to CS0 udf: Prevent buffer overrun with multi-byte characters quota: constify qtree_fmt_operations structures udf: avoid uninitialized variable use udf: Fix lost indirect extent block udf: Factor out code for creating indirect extent udf: limit the maximum number of indirect extents in a row udf: limit the maximum number of TD redirections fs: make quota/dquot.c explicitly non-modular fs: make quota/netlink.c explicitly non-modular
2016-01-15net: phy: turn carrier off on phy attachSjoerd Simons
The operstate of a networking device initially IF_OPER_UNKNOWN aka "unknown", updated on carrier state changes (with carrier state being on by default). This means it will stay unknown unless the carrier state goes to off at some point, which is not the case if the phy is already up/connected at startup. Explicitly turn off the carrier on phy attach, leaving the phy state machine to turn the carrier on when it has done the initial negotiation. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15net: macb: clear interrupts when disabling themNathan Sullivan
Disabling interrupts with the IDR register does not stop the macb hardware from asserting its interrupt line if there are interrupts pending. Always clear the interrupts using ISR, and be sure to write it on hardware that is not read-to-clear, like Zynq. Not doing so will cause interrupts when the driver doesn't expect them. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge first patch-bomb from Andrew Morton: - A few hotfixes which missed 4.4 becasue I was asleep. cc'ed to -stable - A few misc fixes - OCFS2 updates - Part of MM. Including pretty large changes to page-flags handling and to thp management which have been buffered up for 2-3 cycles now. I have a lot of MM material this time. [ It turns out the THP part wasn't quite ready, so that got dropped from this series - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits) zsmalloc: reorganize struct size_class to pack 4 bytes hole mm/zbud.c: use list_last_entry() instead of list_tail_entry() zram/zcomp: do not zero out zcomp private pages zram: pass gfp from zcomp frontend to backend zram: try vmalloc() after kmalloc() zram/zcomp: use GFP_NOIO to allocate streams mm: add tracepoint for scanning pages drivers/base/memory.c: fix kernel warning during memory hotplug on ppc64 mm/page_isolation: use macro to judge the alignment mm: fix noisy sparse warning in LIBCFS_ALLOC_PRE() mm: rework virtual memory accounting include/linux/memblock.h: fix ordering of 'flags' argument in comments mm: move lru_to_page to mm_inline.h Documentation/filesystems: describe the shared memory usage/accounting memory-hotplug: don't BUG() in register_memory_resource() hugetlb: make mm and fs code explicitly non-modular mm/swapfile.c: use list_for_each_entry_safe in free_swap_count_continuations mm: /proc/pid/clear_refs: no need to clear VM_SOFTDIRTY in clear_soft_dirty_pmd() mm: make sure isolate_lru_page() is never called for tail page vmstat: make vmstat_updater deferrable again and shut down on idle ...
2016-01-15sctp: support to lookup with ep+paddr in transport rhashtableXin Long
Now, when we sendmsg, we translate the ep to laddr by selecting the first element of the list, and then do a lookup for a transport. But sctp_hash_cmp() will compare it against asoc addr_list, which may be a subset of ep addr_list, meaning that this chosen laddr may not be there, and thus making it impossible to find the transport. So we fix it by using ep + paddr to lookup transports in hashtable. In sctp_hash_cmp, if .ep is set, we will check if this ep == asoc->ep, or we will do the laddr check. Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reported-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15zsmalloc: reorganize struct size_class to pack 4 bytes holeWeijie Yang
Reoder the pages_per_zspage field in struct size_class which can eliminate the 4 bytes hole between it and stats field. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15mm/zbud.c: use list_last_entry() instead of list_tail_entry()Geliang Tang
list_last_entry*( has been defined in list.h, so replace list_tail_entry() with it. Signed-off-by: Geliang Tang <geliangtang@163.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15zram/zcomp: do not zero out zcomp private pagesSergey Senozhatsky
Do not __GFP_ZERO allocated zcomp ->private pages. We keep allocated streams around and use them for read/write requests, so we supply a zeroed out ->private to compression algorithm as a scratch buffer only once -- the first time we use that stream. For the rest of IO requests served by this stream ->private usually contains some temporarily data from the previous requests. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15zram: pass gfp from zcomp frontend to backendMinchan Kim
Each zcomp backend uses own gfp flag but it's pointless because the context they could be called is driven by upper layer(ie, zcomp frontend). As well, zcomp frondend could call them in different context. One context(ie, zram init part) is it should be better to make sure successful allocation other context(ie, further stream allocation part for accelarating I/O speed) is just optional so let's pass gfp down from driver (ie, zcomp frontend) like normal MM convention. [sergey.senozhatsky@gmail.com: add missing __vmalloc zero and highmem gfps] Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15zram: try vmalloc() after kmalloc()Kyeongdon Kim
When we're using LZ4 multi compression streams for zram swap, we found out page allocation failure message in system running test. That was not only once, but a few(2 - 5 times per test). Also, some failure cases were continually occurring to try allocation order 3. In order to make parallel compression private data, we should call kzalloc() with order 2/3 in runtime(lzo/lz4). But if there is no order 2/3 size memory to allocate in that time, page allocation fails. This patch makes to use vmalloc() as fallback of kmalloc(), this prevents page alloc failure warning. After using this, we never found warning message in running test, also It could reduce process startup latency about 60-120ms in each case. For reference a call trace : Binder_1: page allocation failure: order:3, mode:0x10c0d0 CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20 Call trace: dump_backtrace+0x0/0x270 show_stack+0x10/0x1c dump_stack+0x1c/0x28 warn_alloc_failed+0xfc/0x11c __alloc_pages_nodemask+0x724/0x7f0 __get_free_pages+0x14/0x5c kmalloc_order_trace+0x38/0xd8 zcomp_lz4_create+0x2c/0x38 zcomp_strm_alloc+0x34/0x78 zcomp_strm_multi_find+0x124/0x1ec zcomp_strm_find+0xc/0x18 zram_bvec_rw+0x2fc/0x780 zram_make_request+0x25c/0x2d4 generic_make_request+0x80/0xbc submit_bio+0xa4/0x15c __swap_writepage+0x218/0x230 swap_writepage+0x3c/0x4c shrink_page_list+0x51c/0x8d0 shrink_inactive_list+0x3f8/0x60c shrink_lruvec+0x33c/0x4cc shrink_zone+0x3c/0x100 try_to_free_pages+0x2b8/0x54c __alloc_pages_nodemask+0x514/0x7f0 __get_free_pages+0x14/0x5c proc_info_read+0x50/0xe4 vfs_read+0xa0/0x12c SyS_read+0x44/0x74 DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB [minchan@kernel.org: change vmalloc gfp and adding comment about gfp] [sergey.senozhatsky@gmail.com: tweak comments and styles] Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15zram/zcomp: use GFP_NOIO to allocate streamsSergey Senozhatsky
We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15Merge branch 'hisi-fixes'David S. Miller
Kejian Yan says: ==================== dts: hisi: fixes no syscon fault when init mdio This patchset fixes the bug that eth can't initial successful on hip05-D02 because the dts files doesn't match the source code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15net: hns: fixes no syscon error when init mdioyankejian
As dtsi files use the normal naming conventions using '-' instead of '_' inside of property names, the driver needs to update the phandle name strings of the of_parse_phandle func. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15dts: hisi: fixes no syscon fault when init mdioyankejian
When linux start up, we get the log below: "Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl mdio_bus mdio@803c0000: mdio sys ctl reg has not maped" The source code about the subctrl is dealt syscon, but dts doesn't. It cause such fault, so this patch adds the syscon info on dts files to fixes it. Signed-off-by: Kejian Yan <yankejian@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15net: preserve IP control block during GSO segmentationKonstantin Khlebnikov
Skb_gso_segment() uses skb control block during segmentation. This patch adds 32-bytes room for previous control block which will be copied into all resulting segments. This patch fixes kernel crash during fragmenting forwarded packets. Fragmentation requires valid IP CB in skb for clearing ip options. Also patch removes custom save/restore in ovs code, now it's redundant. Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15perf build: Introduce FEATURES_DUMP make variableJiri Olsa
Introducing FEATURES_DUMP make variable to provide features detection dump file and bypass the feature detection. The intention is to use this during build tests to skip repeated features detection, like: Get feature dump static build into /tmp/fd file: $ make feature-dump FEATURE_DUMP_COPY=/tmp/fd LDFLAGS=-static BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ OFF ] SNIP FEATURE-DUMP file copied into /tmp/fd Use /tmp/fd to build perf: $ make FEATURES_DUMP=/tmp/fd LDFLAGS=-static $ file perf perf: ELF 64-bit LSB executable, x86-64, version 1 (GNU/Linux), statically linked, for ... Suggested-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1452830421-77757-7-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-15perf build: Add feature-dump targetJiri Olsa
To provide FEATURE-DUMP into $(FEATURE_DUMP_COPY) if defined, with no further action. Get feature dump of the current build: $ make feature-dump BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] FEATURE-DUMP file available in FEATURE-DUMP Get feature dump static build into /tmp/fd file: $ make feature-dump FEATURE_DUMP_COPY=/tmp/fd LDFLAGS=-static BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ OFF ] SNIP FEATURE-DUMP file copied into /tmp/fd Suggested-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1452830421-77757-6-git-send-email-wangnan0@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-15perf build: Pass O option to kernel makefile in build-testWang Nan
Kernel makefile only follows an 'O' option passed from command line explicitely. In build-test with 'O' option set, kernel makefile contaminate kernel source directory. Build test also fail if we don't create output directory manually. K_O_OPT is added and passed to kernel makefile if 'O' is passed to build-test. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1452830421-77757-5-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-15perf build: Test correct path of perf in build-testWang Nan
If an 'O' is passed to 'make build-test', many 'test -x' and 'test -f' will fail because perf resides in a different directory. Fix this by computing PERF_OUT according to 'O' and test correct output files. For make_kernelsrc and make_kernelsrc_tools, set KBUILD_OUTPUT_DIR instead because the path is different from others ($(O)/perf vs $(O)/tools/perf). Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1452830421-77757-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-15perf build: Pass O option to Makefile.perf in build-testWang Nan
Unlike tools/perf/Makefile, tools/perf/Makefile.perf obey 'O' option when it is passed through cmdline only, due to code in tools/scripts/Makefile.include: ifneq ($(O),) ifeq ($(origin O), command line) ... ABSOLUTE_O := $(shell cd $(O) ; pwd) OUTPUT := $(ABSOLUTE_O)/$(if $(subdir),$(subdir)/) endif endif This patch passes 'O' to Makefile.perf through cmdline explicitly to make it follow O variable during build-test. 'make clean' should have identical 'O' option with 'make'. If not, config-clean may error. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1452830421-77757-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-15perf build: Set parallel making options build-testWang Nan
'make build-test' is painful because of time consuming. In a full test, all test cases are built twice with tools/perf/Makefile and tools/perf/Makefile.perf. 'Makefile' automatically computes parallel options for make, but 'Makefile.perf' not, so all test cases is built with one job. It is very slow. This patch adds '-j' options to Makefile.perf testing. It computes parallel building options like what tools/perf/Makefile does, and pass '-j' option to Makefile.perf test. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1452687442-6186-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-15perf symbols: Fix reading of build-id from vDSOBen Hutchings
We need to use the long name (the filename) when reading the build-id from a DSO. Using the short name doesn't work for (at least) vDSOs. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160113172301.GT28542@decadent.org.uk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-15perf kvm record/report: 'unprocessable sample' error while ↵Ravi Bangoria
recording/reporting guest data While recording guest samples in host using perf kvm record, it will populate unprocessable sample error, though samples will be recorded properly. While generating report using perf kvm report, no samples will be processed and same error will populate. We have seen this behaviour with upstream perf(4.4-rc3) on x86 and ppc64 hardware. Reason behind this failure is, when it tries to fetch machine from rb_tree of machines, it fails. As a part of tracing a bug, we figured out that this code was incorrectly refactored in commit 54245fdc3576 ("perf session: Remove wrappers to machines__find"). This patch will change the functionality such that if it can't fetch machine in first trial, it will create one node of machine and add that to rb_tree. So next time when it tries to fetch same machine from rb_tree, it won't fail. Actually it was the case before refactoring of code in aforementioned commit. This patch is generated from acme perf/core branch. Below I've mention an example that demonstrate the behaviour before and after applying patch. Before applying patch: [Note: One needs to run guest before recording data in host] ravi@ravi-bangoria:~$ ./perf kvm record -a Warning: 5903 unprocessable samples recorded. Do you have a KVM guest running and not using 'perf kvm'? [ perf record: Captured and wrote 1.409 MB perf.data.guest (285 samples) ] ravi@ravi-bangoria:~$ ./perf kvm report --stdio Warning: 5903 unprocessable samples recorded. Do you have a KVM guest running and not using 'perf kvm'? # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 285 of event 'cycles' # Event count (approx.): 88715406 # # Overhead Command Shared Object Symbol # ........ ....... ............. ...... # # (For a higher level overview, try: perf report --sort comm,dso) # After applying patch: ravi@ravi-bangoria:~$ ./perf kvm record -a [ perf record: Captured and wrote 1.188 MB perf.data.guest (17 samples) ] ravi@ravi-bangoria:~$ ./perf kvm report --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 17 of event 'cycles' # Event count (approx.): 700746 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 34.19% :5758 [unknown] [g] 0xffffffff818682ab 22.79% :5758 [unknown] [g] 0xffffffff812dc7f8 22.79% :5758 [unknown] [g] 0xffffffff818650d0 14.83% :5758 [unknown] [g] 0xffffffff8161a1b6 2.49% :5758 [unknown] [g] 0xffffffff818692bf 0.48% :5758 [unknown] [g] 0xffffffff81869253 0.05% :5758 [unknown] [g] 0xffffffff81869250 Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v3.19+ Fixes: 54245fdc3576 ("perf session: Remove wrappers to machines__find") Link: http://lkml.kernel.org/r/1449471302-11283-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-15Merge branches 'pci/hotplug' and 'pci/resource' into nextBjorn Helgaas
* pci/hotplug: PCI: ibmphp: Remove unneeded NULL test PCI: hotplug: Use list_for_each_entry() to simplify code PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot * pci/resource: PCI: Avoid iterating through memory outside the resource window PCI: Fix minimum allocation address overwrite
2016-01-15Merge branches 'pci/host', 'pci/host-designware', 'pci/host-hisi', ↵Bjorn Helgaas
'pci/host-qcom' and 'pci/host-rcar' into next * pci/host: PCI: host: Add of_pci_get_host_bridge_resources() stub PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD * pci/host-designware: PCI: designware: Make config accessor override checking symmetric PCI: designware: Simplify control flow * pci/host-hisi: PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers * pci/host-qcom: ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: qcom: Add Qualcomm PCIe controller driver PCI: qcom: Document PCIe devicetree bindings PCI: designware: Ensure ATU is enabled before IO/conf space accesses * pci/host-rcar: PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
2016-01-15PCI: host: Add of_pci_get_host_bridge_resources() stubArnd Bergmann
The pcie-rcar driver can be built for any ARM platform (for COMPILE_TEST) including those without CONFIG_OF enabled, and that results in a compile-time error: drivers/pci/host/pcie-rcar.c: In function 'rcar_pcie_parse_request_of_pci_ranges': drivers/pci/host/pcie-rcar.c:939:8: error: implicit declaration of function 'of_pci_get_host_bridge_resources' [-Werror=implicit-function-declaration] err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pci->resources, &iobase); Add a of_pci_get_host_bridge_resources() stub function defined when CONFIG_OF_ADDRESS is disabled to allow compile-testing on all platforms. This mirrors what we do for other OF-specific functions. Fixes: 5d2917d469fa ("PCI: rcar: Convert to DT resource parsing API") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-15btrfs: initialize the seq counter in struct btrfs_deviceSebastian Andrzej Siewior
I managed to trigger this: | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 1 PID: 781 Comm: systemd-gpt-aut Not tainted 4.4.0-rt2+ #14 | Hardware name: ARM-Versatile Express | [<80307cec>] (dump_stack) | [<80070e98>] (__lock_acquire) | [<8007184c>] (lock_acquire) | [<80287800>] (btrfs_ioctl) | [<8012a8d4>] (do_vfs_ioctl) | [<8012ac14>] (SyS_ioctl) so I think that btrfs_device_data_ordered_init() is not invoked behind a macro somewhere. Fixes: 7cc8e58d53cd ("Btrfs: fix unprotected device's variants on 32bits machine") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-15Btrfs: clean up an error code in btrfs_init_space_info()Dan Carpenter
If we return 1 here, then the caller treats it as an error and returns -EINVAL. It causes a static checker warning to treat positive returns as an error. Fixes: 1aba86d67f34 ('Btrfs: fix easily get into ENOSPC in mixed case') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-15btrfs: fix iterator with update error in backref.cGeliang Tang
Fix the following error: fs/btrfs/backref.c:565:1-20: iterator with update on line 577 Fixes: a7ca422('btrfs: use list_for_each_entry* in backref.c') Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-15Btrfs: fix output of compression message in btrfs_parse_options()Tsutomu Itoh
The compression message might not be correctly output. Fix it. [[before fix]] # mount -o compress /dev/sdb3 /test3 [ 996.874264] BTRFS info (device sdb3): disk space caching is enabled [ 996.874268] BTRFS: has skinny extents # mount | grep /test3 /dev/sdb3 on /test3 type btrfs (rw,relatime,compress=zlib,space_cache,subvolid=5,subvol=/) # mount -o remount,compress-force /dev/sdb3 /test3 [ 1035.075017] BTRFS info (device sdb3): force zlib compression [ 1035.075021] BTRFS info (device sdb3): disk space caching is enabled # mount | grep /test3 /dev/sdb3 on /test3 type btrfs (rw,relatime,compress-force=zlib,space_cache,subvolid=5,subvol=/) # mount -o remount,compress /dev/sdb3 /test3 [ 1053.679092] BTRFS info (device sdb3): disk space caching is enabled # mount | grep /test3 /dev/sdb3 on /test3 type btrfs (rw,relatime,compress=zlib,space_cache,subvolid=5,subvol=/) [[after fix]] # mount -o compress /dev/sdb3 /test3 [ 401.021753] BTRFS info (device sdb3): use zlib compression [ 401.021758] BTRFS info (device sdb3): disk space caching is enabled [ 401.021760] BTRFS: has skinny extents # mount | grep /test3 /dev/sdb3 on /test3 type btrfs (rw,relatime,compress=zlib,space_cache,subvolid=5,subvol=/) # mount -o remount,compress-force /dev/sdb3 /test3 [ 439.824624] BTRFS info (device sdb3): force zlib compression [ 439.824629] BTRFS info (device sdb3): disk space caching is enabled # mount | grep /test3 /dev/sdb3 on /test3 type btrfs (rw,relatime,compress-force=zlib,space_cache,subvolid=5,subvol=/) # mount -o remount,compress /dev/sdb3 /test3 [ 459.918430] BTRFS info (device sdb3): use zlib compression [ 459.918434] BTRFS info (device sdb3): disk space caching is enabled # mount | grep /test3 /dev/sdb3 on /test3 type btrfs (rw,relatime,compress=zlib,space_cache,subvolid=5,subvol=/) Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-15Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and ↵Chandan Rajendra
subvolume roots The following call trace is seen when btrfs/031 test is executed in a loop, [ 158.661848] ------------[ cut here ]------------ [ 158.662634] WARNING: CPU: 2 PID: 890 at /home/chandan/repos/linux/fs/btrfs/ioctl.c:558 create_subvol+0x3d1/0x6ea() [ 158.664102] BTRFS: Transaction aborted (error -2) [ 158.664774] Modules linked in: [ 158.665266] CPU: 2 PID: 890 Comm: btrfs Not tainted 4.4.0-rc6-g511711a #2 [ 158.666251] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 158.667392] ffffffff81c0a6b0 ffff8806c7c4f8e8 ffffffff81431fc8 ffff8806c7c4f930 [ 158.668515] ffff8806c7c4f920 ffffffff81051aa1 ffff880c85aff000 ffff8800bb44d000 [ 158.669647] ffff8808863b5c98 0000000000000000 00000000fffffffe ffff8806c7c4f980 [ 158.670769] Call Trace: [ 158.671153] [<ffffffff81431fc8>] dump_stack+0x44/0x5c [ 158.671884] [<ffffffff81051aa1>] warn_slowpath_common+0x81/0xc0 [ 158.672769] [<ffffffff81051b27>] warn_slowpath_fmt+0x47/0x50 [ 158.673620] [<ffffffff813bc98d>] create_subvol+0x3d1/0x6ea [ 158.674440] [<ffffffff813777c9>] btrfs_mksubvol.isra.30+0x369/0x520 [ 158.675376] [<ffffffff8108a4aa>] ? percpu_down_read+0x1a/0x50 [ 158.676235] [<ffffffff81377a81>] btrfs_ioctl_snap_create_transid+0x101/0x180 [ 158.677268] [<ffffffff81377b52>] btrfs_ioctl_snap_create+0x52/0x70 [ 158.678183] [<ffffffff8137afb4>] btrfs_ioctl+0x474/0x2f90 [ 158.678975] [<ffffffff81144b8e>] ? vma_merge+0xee/0x300 [ 158.679751] [<ffffffff8115be31>] ? alloc_pages_vma+0x91/0x170 [ 158.680599] [<ffffffff81123f62>] ? lru_cache_add_active_or_unevictable+0x22/0x70 [ 158.681686] [<ffffffff813d99cf>] ? selinux_file_ioctl+0xff/0x1d0 [ 158.682581] [<ffffffff8117b791>] do_vfs_ioctl+0x2c1/0x490 [ 158.683399] [<ffffffff813d3cde>] ? security_file_ioctl+0x3e/0x60 [ 158.684297] [<ffffffff8117b9d4>] SyS_ioctl+0x74/0x80 [ 158.685051] [<ffffffff819b2bd7>] entry_SYSCALL_64_fastpath+0x12/0x6a [ 158.685958] ---[ end trace 4b63312de5a2cb76 ]--- [ 158.686647] BTRFS: error (device loop0) in create_subvol:558: errno=-2 No such entry [ 158.709508] BTRFS info (device loop0): forced readonly [ 158.737113] BTRFS info (device loop0): disk space caching is enabled [ 158.738096] BTRFS error (device loop0): Remounting read-write after error is not allowed [ 158.851303] BTRFS error (device loop0): cleaner transaction attach returned -30 This occurs because, Mount filesystem Create subvol with ID 257 Unmount filesystem Mount filesystem Delete subvol with ID 257 btrfs_drop_snapshot() Add root corresponding to subvol 257 into btrfs_transaction->dropped_roots list Create new subvol (i.e. create_subvol()) 257 is returned as the next free objectid btrfs_read_fs_root_no_name() Finds the btrfs_root instance corresponding to the old subvol with ID 257 in btrfs_fs_info->fs_roots_radix. Returns error since btrfs_root_item->refs has the value of 0. To fix the issue the commit initializes tree root's and subvolume root's highest_objectid when loading the roots from disk. Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-15btrfs: cleanup, stop casting for extent_map->lookup everywhereJeff Mahoney
Overloading extent_map->bdev to struct map_lookup * might have started out as a means to an end, but it's a pattern that's used all over the place now. Let's get rid of the casting and just add a union instead. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-15drm/amdgpu: Add some tweaks to gfx 8 soft resetAlex Deucher
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-15drm/amdgpu: fix tonga smu resumeAlex Deucher
Need to make sure smu buffers are pinned on resume. This matches what Fiji does. Cc: stable@vger.kernel.org Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-15Merge branch 'kvm-ppc-next' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
2016-01-15ALSA: timer: Code cleanupTakashi Iwai
This is a minor code cleanup without any functional changes: - Kill keep_flag argument from _snd_timer_stop(), as all callers pass only it false. - Remove redundant NULL check in _snd_timer_stop(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-15ALSA: timer: Harden slave timer list handlingTakashi Iwai
A slave timer instance might be still accessible in a racy way while operating the master instance as it lacks of locking. Since the master operation is mostly protected with timer->lock, we should cope with it while changing the slave instance, too. Also, some linked lists (active_list and ack_list) of slave instances aren't unlinked immediately at stopping or closing, and this may lead to unexpected accesses. This patch tries to address these issues. It adds spin lock of timer->lock (either from master or slave, which is equivalent) in a few places. For avoiding a deadlock, we ensure that the global slave_active_lock is always locked at first before each timer lock. Also, ack and active_list of slave instances are properly unlinked at snd_timer_stop() and snd_timer_close(). Last but not least, remove the superfluous call of _snd_timer_stop() at removing slave links. This is a noop, and calling it may confuse readers wrt locking. Further cleanup will follow in a later patch. Actually we've got reports of use-after-free by syzkaller fuzzer, and this hopefully fixes these issues. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-15ALSA: hda - Add fixup for Dell Latitidue E6540Takashi Iwai
Another Dell model, another fixup entry: Latitude E6540 needs the same fixup as other Latitude E series as workaround for noise problems. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104341 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-15x86/irq: Plug vector cleanup raceThomas Gleixner
We still can end up with a stale vector due to the following: CPU0 CPU1 CPU2 lock_vector() data->move_in_progress=0 sendIPI() unlock_vector() set_affinity() assign_irq_vector() lock_vector() handle_IPI move_in_progress = 1 lock_vector() unlock_vector() move_in_progress == 1 So we need to serialize the vector assignment against a pending cleanup. The solution is rather simple now. We not only check for the move_in_progress flag in assign_irq_vector(), we also check whether there is still a cleanup pending in the old_domain cpumask. If so, we return -EBUSY to the caller and let him deal with it. Though we have to be careful in the cpu unplug case. If the cleanout has not yet completed then the following setaffinity() call would return -EBUSY. Add code which prevents this. Full context is here: http://lkml.kernel.org/r/5653B688.4050809@stratus.com Reported-and-tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org #4.3+ Link: http://lkml.kernel.org/r/20151231160107.207265407@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-15x86/irq: Call irq_force_move_complete with irq descriptorThomas Gleixner
First of all there is no point in looking up the irq descriptor again, but we also need the descriptor for the final cleanup race fix in the next patch. Make that change seperate. No functional difference. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org #4.3+ Link: http://lkml.kernel.org/r/20151231160107.125211743@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-15x86/irq: Remove outgoing CPU from vector cleanup maskThomas Gleixner
We want to synchronize new vector assignments with a pending cleanup. Remove a dying cpu from a pending cleanup mask. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org #4.3+ Link: http://lkml.kernel.org/r/20151231160107.045961667@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-15x86/irq: Remove the cpumask allocation from send_cleanup_vector()Thomas Gleixner
There is no need to allocate a new cpumask for sending the cleanup vector. The old_domain mask is now protected by the vector_lock, so we can safely remove the offline cpus from it and send the IPI with the resulting mask. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org #4.3+ Link: http://lkml.kernel.org/r/20151231160106.967993932@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-15x86/irq: Clear move_in_progress before sending cleanup IPIThomas Gleixner
send_cleanup_vector() fiddles with the old_domain mask unprotected because it relies on the protection by the move_in_progress flag. But this is fatal, as the flag is reset after the IPI has been sent. So a cpu which receives the IPI can still see the flag set and therefor ignores the cleanup request. If no other cleanup request happens then the vector stays stale on that cpu and in case of an irq removal the vector still persists. That can lead to use after free when the next cleanup IPI happens. Protect the code with vector_lock and clear move_in_progress before sending the IPI. This does not plug the race which Joe reported because: CPU0 CPU1 CPU2 lock_vector() data->move_in_progress=0 sendIPI() unlock_vector() set_affinity() assign_irq_vector() lock_vector() handle_IPI move_in_progress = 1 lock_vector() unlock_vector() move_in_progress == 1 The full fix comes with a later patch. Reported-and-tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org #4.3+ Link: http://lkml.kernel.org/r/20151231160106.892412198@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-15x86/irq: Remove offline cpus from vector cleanupThomas Gleixner
No point of keeping offline cpus in the cleanup mask. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org #4.3+ Link: http://lkml.kernel.org/r/20151231160106.808642683@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-15x86/irq: Get rid of code duplicationThomas Gleixner
Reusing an existing vector and assigning a new vector has duplicated code. Consolidate it. This is also a preparatory patch for finally plugging the cleanup race. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org #4.3+ Link: http://lkml.kernel.org/r/20151231160106.721599216@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-15x86/irq: Copy vectormask instead of an AND operationThomas Gleixner
In the case that the new vector mask is a subset of the existing mask there is no point to do a AND operation of currentmask & newmask. The result is newmask. So we can simply copy the new mask to the current mask and be done with it. Preparatory patch for further consolidation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org #4.3+ Link: http://lkml.kernel.org/r/20151231160106.640253454@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-15x86/irq: Check vector allocation earlyThomas Gleixner
__assign_irq_vector() uses the vector_cpumask which is assigned by apic->vector_allocation_domain() without doing basic sanity checks. That can result in a situation where the final assignement of a newly found vector fails in apic->cpu_mask_to_apicid_and(). So we have to do rollbacks for no reason. apic->cpu_mask_to_apicid_and() only fails if vector_cpumask & requested_cpumask & cpu_online_mask is empty. Check for this condition right away and if the result is empty try immediately the next possible cpu in the requested mask. So in case of a failure the old setting is unchanged and we can remove the rollback code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org #4.3+ Link: http://lkml.kernel.org/r/20151231160106.561877324@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit (git 2.34.1) at 2025-09-16 09:06:35 +0000