| Age | Commit message (Collapse) | Author |
|---|
|
If the num-lanes property is not present in the devicetree, update
pci->num_lanes with the hardware supported maximum link width using
the newly introduced dw_pcie_link_get_max_link_width() API.
The API is used to get the Maximum Link Width (MLW) of the controller.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: reworded commit message a bit]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250328-preset_v6-v9-3-22cfa0490518@oss.qualcomm.com
|
|
PCIe equalization presets are predefined settings used to optimize
signal integrity by compensating for signal loss and distortion in
high-speed data transmission.
As per PCIe spec 6.0.1 revision section 8.3.3.3 & 4.2.4 for data rates
of 8.0 GT/s, 16.0 GT/s, 32.0 GT/s, and 64.0 GT/s, there is a way to
configure lane equalization presets for each lane to enhance the PCIe
link reliability. Each preset value represents a different combination
of pre-shoot and de-emphasis values. For each data rate, different
registers are defined: for 8.0 GT/s, registers are defined in section
7.7.3.4; for 16.0 GT/s, in section 7.7.5.9, etc. The 8.0 GT/s rate has
an extra receiver preset hint, requiring 16 bits per lane, while the
remaining data rates use 8 bits per lane.
Based on the number of lanes and the supported data rate,
of_pci_get_equalization_presets() reads the device tree property and
stores in the presets structure.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250328-preset_v6-v9-2-22cfa0490518@oss.qualcomm.com
|
|
On rcar-gen4, the ep BAR4 has a fixed size of 256B. Document this
constraint in the epc features of the platform.
Fixes: e311b3834dfa ("PCI: rcar-gen4: Add endpoint mode support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250328-rcar-gen4-bar4-v1-1-10bb6ce9ee7f@baylibre.com
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227-pcie-global-irq-v1-20-2b70a7819d1e@linaro.org
|
|
IPQ6018 has 8 MSI SPI and one 'global' interrupt.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227-pcie-global-irq-v1-18-2b70a7819d1e@linaro.org
|
|
IPA8074 has 8 MSI SPI and one 'global' interrupt.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227-pcie-global-irq-v1-16-2b70a7819d1e@linaro.org
|
|
MSM8998 has 8 MSI SPI and one 'global' interrupt.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227-pcie-global-irq-v1-14-2b70a7819d1e@linaro.org
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227-pcie-global-irq-v1-11-2b70a7819d1e@linaro.org
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227-pcie-global-irq-v1-9-2b70a7819d1e@linaro.org
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227-pcie-global-irq-v1-7-2b70a7819d1e@linaro.org
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227-pcie-global-irq-v1-5-2b70a7819d1e@linaro.org
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227-pcie-global-irq-v1-3-2b70a7819d1e@linaro.org
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227-pcie-global-irq-v1-1-2b70a7819d1e@linaro.org
|
|
The order of rockchip_pci_core_rsts introduced in the offending commit
followed the previous comment that warned not to reorder them. But the
commit failed to take into account that reset_control_bulk_deassert()
deasserts the resets in reverse order. So this leads to the link getting
downgraded to 2.5 GT/s.
Hence, restore the deassert order and also add back the comments for
rockchip_pci_core_rsts.
Tested on NanoPC-T4 with Samsung 970 Pro.
Fixes: 18715931a5c0 ("PCI: rockchip: Simplify reset control handling by using reset_control_bulk*() function")
Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com>
[mani: reworded the commit message and the comment above rockchip_pci_core_rsts]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20250328105822.3946767-1-jensenhuang@friendlyarm.com
|
|
Loongson PCIe Root Ports don't advertise an ACS capability, but they do not
allow peer-to-peer transactions between Root Ports. Add an ACS quirk so
each Root Port can be in a separate IOMMU group.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250403040756.720409-1-chenhuacai@loongson.cn
|
|
Print the delay amount that pcie_wait_for_link_delay() is invoked with
instead of the hardcoded 1000ms value in the debug info print.
Fixes: 7b3ba09febf4 ("PCI/PM: Shorten pci_bridge_wait_for_secondary_bus() wait time for slow links")
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250414001505.21243-2-wilfred.opensource@gmail.com
|
|
CE4100 PCI specific code has no 'pci' suffix in the filename,
intel_mid_pci.c is the only one that duplicates the folder name in its
filename, drop that redundancy.
While at it, group the respective modules in the Makefile.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20250407070321.3761063-1-andriy.shevchenko@linux.intel.com
|
|
In February 2003, historic commit
https://git.kernel.org/tglx/history/c/280c1c9a0ea4
("[PATCH] PCI Hotplug: Replace pcihpfs with sysfs.")
removed all invocations of __get_free_page() and free_page() from the PCI
hotplug core without also removing the #include <linux/pagemap.h>
directive.
It removed all invocations of kern_mount(), mntget() and mntput()
without also removing the #include <linux/mount.h> directive.
It removed all invocations of lookup_hash()
without also removing the #include <linux/namei.h> directive.
It removed all invocations of copy_to_user() and copy_from_user()
without also removing the #include <linux/uaccess.h> directive.
These #include directives are still unnecessary today, so drop them.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/c19e25bf2cefecc14e0822c6a9bb3a7f546258bc.1744640331.git.lukas@wunner.de
|
|
pci_read_bases() is given literal 6 that means PCI_STD_NUM_BARS. Replace
the literal with the define to annotate the code better.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250416100239.6958-1-ilpo.jarvinen@linux.intel.com
|
|
When a Secondary Bus Reset is issued at a hotplug port, it causes a Data
Link Layer State Changed event as a side effect. On hotplug ports using
in-band presence detect, it additionally causes a Presence Detect Changed
event.
These spurious events should not result in teardown and re-enumeration of
the device in the slot. Hence commit 2e35afaefe64 ("PCI: pciehp: Add
reset_slot() method") masked the Presence Detect Changed Enable bit in the
Slot Control register during a Secondary Bus Reset. Commit 06a8d89af551
("PCI: pciehp: Disable link notification across slot reset") additionally
masked the Data Link Layer State Changed Enable bit.
However masking those bits only disables interrupt generation (PCIe r6.2
sec 6.7.3.1). The events are still visible in the Slot Status register
and picked up by the IRQ handler if it runs during a Secondary Bus Reset.
This can happen if the interrupt is shared or if an unmasked hotplug event
occurs, e.g. Attention Button Pressed or Power Fault Detected.
The likelihood of this happening used to be small, so it wasn't much of a
problem in practice. That has changed with the recent introduction of
bandwidth control in v6.13-rc1 with commit 665745f27487 ("PCI/bwctrl:
Re-add BW notification portdrv as PCIe BW controller"):
Bandwidth control shares the interrupt with PCIe hotplug. A Secondary Bus
Reset causes a Link Bandwidth Notification, so the hotplug IRQ handler
runs, picks up the masked events and tears down the device in the slot.
As a result, Joel reports VFIO passthrough failure of a GPU, which Ilpo
root-caused to the incorrect handling of masked hotplug events.
Clearly, a more reliable way is needed to ignore spurious hotplug events.
For Downstream Port Containment, a new ignore mechanism was introduced by
commit a97396c6eb13 ("PCI: pciehp: Ignore Link Down/Up caused by DPC").
It has been working reliably for the past four years.
Adapt it for Secondary Bus Resets.
Introduce two helpers to annotate code sections which cause spurious link
changes: pci_hp_ignore_link_change() and pci_hp_unignore_link_change()
Use those helpers in lieu of masking interrupts in the Slot Control
register.
Introduce a helper to check whether such a code section is executing
concurrently and if so, await it: pci_hp_spurious_link_change()
Invoke the helper in the hotplug IRQ thread pciehp_ist(). Re-use the
IRQ thread's existing code which ignores DPC-induced link changes unless
the link is unexpectedly down after reset recovery or the device was
replaced during the bus reset.
That code block in pciehp_ist() was previously only executed if a Data
Link Layer State Changed event has occurred. Additionally execute it for
Presence Detect Changed events. That's necessary for compatibility with
PCIe r1.0 hotplug ports because Data Link Layer State Changed didn't exist
before PCIe r1.1. DPC was added with PCIe r3.1 and thus DPC-capable
hotplug ports always support Data Link Layer State Changed events.
But the same cannot be assumed for Secondary Bus Reset, which already
existed in PCIe r1.0.
Secondary Bus Reset is only one of many causes of spurious link changes.
Others include runtime suspend to D3cold, firmware updates or FPGA
reconfiguration. The new pci_hp_{,un}ignore_link_change() helpers may be
used by all kinds of drivers to annotate such code sections, hence their
declarations are publicly visible in <linux/pci.h>. A case in point is
the Mellanox Ethernet driver which disables a firmware reset feature if
the Ethernet card is attached to a hotplug port, see commit 3d7a3f2612d7
("net/mlx5: Nack sync reset request when HotPlug is enabled"). Going
forward, PCIe hotplug will be able to cope gracefully with all such use
cases once the code sections are properly annotated.
The new helpers internally use two bits in struct pci_dev's priv_flags as
well as a wait_queue. This mirrors what was done for DPC by commit
a97396c6eb13 ("PCI: pciehp: Ignore Link Down/Up caused by DPC"). That may
be insufficient if spurious link changes are caused by multiple sources
simultaneously. An example might be a Secondary Bus Reset issued by AER
during FPGA reconfiguration. If this turns out to happen in real life,
support for it can easily be added by replacing the PCI_LINK_CHANGING flag
with an atomic_t counter incremented by pci_hp_ignore_link_change() and
decremented by pci_hp_unignore_link_change(). Instead of awaiting a zero
PCI_LINK_CHANGING flag, the pci_hp_spurious_link_change() helper would
then simply await a zero counter.
Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Reported-by: Joel Mathew Thomas <proxy0@tutamail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219765
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Joel Mathew Thomas <proxy0@tutamail.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/d04deaf49d634a2edf42bf3c06ed81b4ca54d17b.1744298239.git.lukas@wunner.de
|
|
Commit a97396c6eb13 ("PCI: pciehp: Ignore Link Down/Up caused by DPC")
amended PCIe hotplug to not bring down the slot upon Data Link Layer State
Changed events caused by Downstream Port Containment.
However Keith reports off-list that if the slot uses in-band presence
detect (i.e. Presence Detect State is derived from Data Link Layer Link
Active), DPC also causes a spurious Presence Detect Changed event.
This needs to be ignored as well.
Unfortunately there's no register indicating that in-band presence detect
is used. PCIe r5.0 sec 7.5.3.10 introduced the In-Band PD Disable bit in
the Slot Control Register. The PCIe hotplug driver sets this bit on
ports supporting it. But older ports may still use in-band presence
detect.
If in-band presence detect can be disabled, Presence Detect Changed events
occurring during DPC must not be ignored because they signal device
replacement. On all other ports, device replacement cannot be detected
reliably because the Presence Detect Changed event could be a side effect
of DPC. On those (older) ports, perform a best-effort device replacement
check by comparing the Vendor ID, Device ID and other data in Config Space
with the values cached in struct pci_dev. Use the existing helper
pciehp_device_replaced() to accomplish this. It is currently #ifdef'ed to
CONFIG_PM_SLEEP in pciehp_core.c, so move it to pciehp_hpc.c where most
other functions accessing config space reside.
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/fa264ff71952915c4e35a53c89eb0cde8455a5c5.1744298239.git.lukas@wunner.de
|
|
Since 1c7f4fe86f17 ("powerpc/pci: Remove pcibios_setup_bus_devices()")
there's no architecture left setting pci_fixup_cardbus. Therefore remove
support from PCI core.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/8de7da4c-2b16-4ee1-8c42-0d04f3c821c6@gmail.com
|
|
All users of the deprecated function pcim_iounmap_regions() have been
ported by now. Remove it.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250327110707.20025-4-phasta@kernel.org
|
|
pcim_iounmap_regions() is deprecated. Moreover, it is not necessary to call
it in the driver's remove() function or if probe() fails, since it does
cleanup automatically on driver detach.
Remove all calls to pcim_iounmap_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250327110707.20025-3-phasta@kernel.org
|
|
of_node_to_fwnode() is irqdomain's reimplementation of the "officially"
defined of_fwnode_handle(). The former is in the process of being removed,
so use the latter instead.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250319092951.37667-8-jirislaby@kernel.org
|
|
|
|
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when
included from assembly code.
Mirror this behaviour in the tools/ variant.
Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the
toolchain automatically.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/
Fixes: c9fbaa879508 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- support up to 8192 processors
- add cpuidle governor debug telemetry, disabled by default
- update default output to exclude cpuidle invocation counts
- bug fixes
* tag 'turbostat-2025.05.06' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: v2025.05.06
tools/power turbostat: disable "cpuidle" invocation counters, by default
tools/power turbostat: re-factor sysfs code
tools/power turbostat: Restore GFX sysfs fflush() call
tools/power turbostat: Document GNR UncMHz domain convention
tools/power turbostat: report CoreThr per measurement interval
tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192
tools/power turbostat: Add idle governor statistics reporting
tools/power turbostat: Fix names matching
tools/power turbostat: Allow Zero return value for some RAPL registers
tools/power turbostat: Clustered Uncore MHz counters should honor show/hide options
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc
driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT
* tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
|
|
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Create "pct_idle" counter group, the sofware notion of residency
so it can now be singled out, independent of other counter groups.
Create "cpuidle" group, the cpuidle invocation counts.
Disable "cpuidle", by default.
Create "swidle" = "cpuidle" + "pct_idle".
Undocument "sysfs", the old name for "swidle", but keep it working
for backwards compatibilty.
Create "hwidle", all the HW idle counters
Modify "idle", enabled by default
"idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle")
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix a perf events time accounting bug"
* tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix child_total_time_enabled accounting bug at task exit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a nonsensical Kconfig combination
- Remove an unnecessary rseq-notification
* tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Eliminate useless task_work on execve
sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
|
|
... and don't error out so hard on missing module descriptions.
Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
we used to warn about missing module descriptions, but only when
building with extra warnigns (ie 'W=1').
After that commit the warning became an unconditional hard error.
And it turns out not all modules have been converted despite the claims
to the contrary. As reported by Damian Tometzki, the slub KUnit test
didn't have a module description, and apparently nobody ever really
noticed.
The reason nobody noticed seems to be that the slub KUnit tests get
disabled by SLUB_TINY, which also ends up disabling a lot of other code,
both in tests and in slub itself. And so anybody doing full build tests
didn't actually see this failre.
So let's disable SLUB_TINY for build-only tests, since it clearly ends
up limiting build coverage. Also turn the missing module descriptions
error back into a warning, but let's keep it around for non-'W=1'
builds.
Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Probe cpuidle "sysfs" residency and counts separately,
since soon we will make one disabled on, and the
other disabled off.
Clarify that some BIC (build-in-counters) are actually "groups".
since we're about to re-name some of those groups.
no functional change.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Do fflush() to discard the buffered data, before each read of the
graphics sysfs knobs.
Fixes: ba99a4fc8c24 ("tools/power turbostat: Remove unnecessary fflush() call")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Document that on Intel Granite Rapids Systems,
Uncore domains 0-2 are CPU domains, and
uncore domains 3-4 are IO domains.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053fe30 ("turbostat: Support thermal throttle count print")
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
|
|
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
# turbostat -c 1100-1151
"--cpu 1100-1151" malformed
...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
- A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64
out of tree.
The code assumes that hierarchical interrupt domains are enabled
and dereferences irq_data::parent_data unconditionally. That works
in mainline because both architectures which enable that code have
hierarchical domains enabled. Though it breaks the ia64 build,
which enables the functionality, but does not have hierarchical
domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which
has the appropriate #ifdeffery in place"
* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
irqdomain: Stop using 'host' for domain
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A revert to fix a adjtimex() regression:
The recent change to prevent that time goes backwards for the coarse
time getters due to immediate multiplier adjustments via adjtimex(),
changed the way how the timekeeping core treats that.
That change result in a regression on the adjtimex() side, which is
user space visible:
1) The forwarding of the base time moves the update out of the
original period and establishes a new one. That's changing the
behaviour of the [PF]LL control, which user space expects to be
applied periodically.
2) The clearing of the accumulated NTP error due to #1, changes the
behaviour as well.
An attempt to delay the multiplier/frequency update to the next tick
did not solve the problem as userspace expects that the multiplier or
frequency updates are in effect, when the syscall returns.
There is a different solution for the coarse time problem available,
so revert the offending commit to restore the existing adjtimex()
behaviour"
* tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"One important fix and one small configuration update.
The first patch by Artur Rojek fixes an issue with the J2 firmware
loader not being able to find the location of the device tree blob due
to insufficient alignment of the .bss section which rendered J2 boards
unbootable.
The second patch by Johan Korsnes updates the defconfigs on sh to drop
the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete
after 8c710f75256b ("net/sched: Retire tcindex classifier").
Summary:
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
- sh: Align .bss section padding to 8-byte boundary"
* tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
sh: Align .bss section padding to 8-byte boundary
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly from the end of last week, this week was very
quiet, maybe you scared everyone away. It's mostly amdgpu, and xe,
with some i915, adp and bridge bits, since I think this is overly
quiet I'd expect rc2 to be a bit more lively.
bridge:
- tda998x: Select CONFIG_DRM_KMS_HELPER
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
xe:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
i915:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
adp:
- Fix error handling in plane setup"
# -----BEGIN PGP SIGNATURE-----
* tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER
drm/amdgpu/gfx12: fix num_mec
drm/amdgpu/gfx11: fix num_mec
drm/amd/pm: Add gpu_metrics_v1_8
drm/amdgpu: Prefer shadow rom when available
drm/amd/pm: Update smu metrics table for smu_v13_0_6
drm/amd/pm: Remove host limit metrics support
Remove unnecessary firmware version check for gc v9_4_2
drm/amdgpu: stop unmapping MQD for kernel queues v3
Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA"
drm/amdgpu: Parse all deferred errors with UMC aca handle
drm/amdgpu: Update ta ras block
drm/amdgpu: Add NPS2 to DPX compatible mode
drm/amdgpu: Use correct gfx deferred error count
drm/amd/display: Actually do immediate vblank disable
drm/amd/display: prevent hang on link training fail
Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting"
drm/amd/display: Increase vblank offdelay for PSR panels
drm/amd: Handle being compiled without SI or CIK support better
drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2
...
|
|
The rpm-pkg make target currently suffers from a few issues related to
debuginfo:
1. debuginfo for things built into the kernel (vmlinux) is not available
in any RPM produced by make rpm-pkg. This makes using tools like
systemtap against a make rpm-pkg kernel impossible.
2. debug source for the kernel is not available. This means that
commands like 'disas /s' in gdb, which display source intermixed with
assembly, can only print file names/line numbers which then must be
painstakingly resolved to actual source in a separate editor.
3. debuginfo for modules is available, but it remains bundled with the
.ko files that contain module code, in the main kernel RPM. This is a
waste of space for users who do not need to debug the kernel (i.e.
most users).
Address all of these issues by additionally building a debuginfo RPM
when the kernel configuration allows for it, in line with standard
patterns followed by RPM distributors. With these changes:
1. systemtap now works (when these changes are backported to 6.11, since
systemtap lags a bit behind in compatibility), as verified by the
following simple test script:
# stap -e 'probe kernel.function("do_sys_open").call { printf("%s\n", $$parms); }'
dfd=0xffffffffffffff9c filename=0x7fe18800b160 flags=0x88800 mode=0x0
...
2. disas /s works correctly in gdb, with source and disassembly
interspersed:
# gdb vmlinux --batch -ex 'disas /s blk_op_str'
Dump of assembler code for function blk_op_str:
block/blk-core.c:
125 {
0xffffffff814c8740 <+0>: endbr64
127
128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op])
0xffffffff814c8744 <+4>: mov $0xffffffff824a7378,%rax
0xffffffff814c874b <+11>: cmp $0x23,%edi
0xffffffff814c874e <+14>: ja 0xffffffff814c8768 <blk_op_str+40>
0xffffffff814c8750 <+16>: mov %edi,%edi
126 const char *op_str = "UNKNOWN";
0xffffffff814c8752 <+18>: mov $0xffffffff824a7378,%rdx
127
128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op])
0xffffffff814c8759 <+25>: mov -0x7dfa0160(,%rdi,8),%rax
126 const char *op_str = "UNKNOWN";
0xffffffff814c8761 <+33>: test %rax,%rax
0xffffffff814c8764 <+36>: cmove %rdx,%rax
129 op_str = blk_op_name[op];
130
131 return op_str;
132 }
0xffffffff814c8768 <+40>: jmp 0xffffffff81d01360 <__x86_return_thunk>
End of assembler dump.
3. The size of the main kernel package goes down substantially,
especially if many modules are built (quite typical). Here is a
comparison of installed size of the kernel package (configured with
allmodconfig, dwarf4 debuginfo, and module compression turned off)
before and after this patch:
# rpm -qi kernel-6.13* | grep -E '^(Version|Size)'
Version : 6.13.0postpatch+
Size : 1382874089
Version : 6.13.0prepatch+
Size : 17870795887
This is a ~92% size reduction.
Note that a debuginfo package can only be produced if the following
configs are set:
- CONFIG_DEBUG_INFO=y
- CONFIG_MODULE_COMPRESS=n
- CONFIG_DEBUG_INFO_SPLIT=n
The first of these is obvious - we can't produce debuginfo if the build
does not generate it. The second two requirements can in principle be
removed, but doing so is difficult with the current approach, which uses
a generic rpmbuild script find-debuginfo.sh that processes all packaged
executables. If we want to remove those requirements the best path
forward is likely to add some debuginfo extraction/installation logic to
the modules_install target (controllable by flags). That way, it's
easier to operate on modules before they're compressed, and the logic
can be reused by all packaging targets.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The scripts/kconfig/merge_config.sh script requires an existing
$INITFILE (or the $1 argument) as a base file for merging Kconfig
fragments. However, an empty $INITFILE can serve as an initial starting
point, later referenced by the KCONFIG_ALLCONFIG Makefile variable
if -m is not used. This variable can point to any configuration file
containing preset config symbols (the merged output) as stated in
Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will
contain just the merge output requiring the user to run make (i.e.
KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make
olddefconfig).
Instead of failing when `$INITFILE` is missing, create an empty file and
use it as the starting point for merges.
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_NIOS2_DTB_SOURCE_BOOL to CONFIG_BUILTIN_DTB, and
CONFIG_NIOS2_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This option was removed from Kconfig in 8c710f75256b ("net/sched:
Retire tcindex classifier") but from the defconfigs.
Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier")
Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
J2-based devices expect to find a device tree blob at the end of the
.bss section. As of a77725a9a3c5 ("scripts/dtc: Update to upstream
version v1.6.1-19-g0a3a9d3449c8"), libfdt enforces 8-byte alignment
for the DTB, causing J2 devices to fail early in sh_fdt_init().
As the J2 loader firmware calculates the DTB location based on the kernel
image .bss section size rather than the __bss_stop symbol offset, the
required alignment can't be enforced with BSS_SECTION(0, PAGE_SIZE, 8).
To fix this, inline a modified version of the above macro which grows
.bss by the required size. While this change affects all existing SH
boards, it should be benign on platforms which don't need this alignment.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
