summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-22Revert "slub: move synchronize_sched out of slab_mutex on shrink"Tejun Heo
Patch series "slab: make memcg slab destruction scalable", v3. With kmem cgroup support enabled, kmem_caches can be created and destroyed frequently and a great number of near empty kmem_caches can accumulate if there are a lot of transient cgroups and the system is not under memory pressure. When memory reclaim starts under such conditions, it can lead to consecutive deactivation and destruction of many kmem_caches, easily hundreds of thousands on moderately large systems, exposing scalability issues in the current slab management code. I've seen machines which end up with hundred thousands of caches and many millions of kernfs_nodes. The current code is O(N^2) on the total number of caches and has synchronous rcu_barrier() and synchronize_sched() in cgroup offline / release path which is executed while holding cgroup_mutex. Combined, this leads to very expensive and slow cache destruction operations which can easily keep running for half a day. This also messes up /proc/slabinfo along with other cache iterating operations. seq_file operates on 4k chunks and on each 4k boundary tries to seek to the last position in the list. With a huge number of caches on the list, this becomes very slow and very prone to the list content changing underneath it leading to a lot of missing and/or duplicate entries. This patchset addresses the scalability problem. * Add root and per-memcg lists. Update each user to use the appropriate list. * Make rcu_barrier() for SLAB_DESTROY_BY_RCU caches globally batched and asynchronous. * For dying empty slub caches, remove the sysfs files after deactivation so that we don't end up with millions of sysfs files without any useful information on them. This patchset contains the following nine patches. 0001-Revert-slub-move-synchronize_sched-out-of-slab_mutex.patch 0002-slub-separate-out-sysfs_slab_release-from-sysfs_slab.patch 0003-slab-remove-synchronous-rcu_barrier-call-in-memcg-ca.patch 0004-slab-reorganize-memcg_cache_params.patch 0005-slab-link-memcg-kmem_caches-on-their-associated-memo.patch 0006-slab-implement-slab_root_caches-list.patch 0007-slab-introduce-__kmemcg_cache_deactivate.patch 0008-slab-remove-synchronous-synchronize_sched-from-memcg.patch 0009-slab-remove-slub-sysfs-interface-files-early-for-emp.patch 0010-slab-use-memcg_kmem_cache_wq-for-slab-destruction-op.patch 0001 reverts an existing optimization to prepare for the following changes. 0002 is a prep patch. 0003 makes rcu_barrier() in release path batched and asynchronous. 0004-0006 separate out the lists. 0007-0008 replace synchronize_sched() in slub destruction path with call_rcu_sched(). 0009 removes sysfs files early for empty dying caches. 0010 makes destruction work items use a workqueue with limited concurrency. This patch (of 10): Revert 89e364db71fb5e ("slub: move synchronize_sched out of slab_mutex on shrink"). With kmem cgroup support enabled, kmem_caches can be created and destroyed frequently and a great number of near empty kmem_caches can accumulate if there are a lot of transient cgroups and the system is not under memory pressure. When memory reclaim starts under such conditions, it can lead to consecutive deactivation and destruction of many kmem_caches, easily hundreds of thousands on moderately large systems, exposing scalability issues in the current slab management code. This is one of the patches to address the issue. Moving synchronize_sched() out of slab_mutex isn't enough as it's still inside cgroup_mutex. The whole deactivation / release path will be updated to avoid all synchronous RCU operations. Revert this insufficient optimization in preparation to ease future changes. Link: http://lkml.kernel.org/r/20170117235411.9408-2-tj@kernel.org Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jay Vana <jsvana@fb.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22mm, slab: rename kmalloc-node cache to kmalloc-<size>Vlastimil Babka
SLAB as part of its bootstrap pre-creates one kmalloc cache that can fit the kmem_cache_node management structure, and puts it into the generic kmalloc cache array (e.g. for 128b objects). The name of this cache is "kmalloc-node", which is confusing for readers of /proc/slabinfo as the cache is used for generic allocations (and not just the kmem_cache_node struct) and it appears as the kmalloc-128 cache is missing. An easy solution is to use the kmalloc-<size> name when pre-creating the cache, which we can get from the kmalloc_info array. Example /proc/slabinfo before the patch: ... kmalloc-256 1647 1984 256 16 1 : tunables 120 60 8 : slabdata 124 124 828 kmalloc-192 1974 1974 192 21 1 : tunables 120 60 8 : slabdata 94 94 133 kmalloc-96 1332 1344 128 32 1 : tunables 120 60 8 : slabdata 42 42 219 kmalloc-64 2505 5952 64 64 1 : tunables 120 60 8 : slabdata 93 93 715 kmalloc-32 4278 4464 32 124 1 : tunables 120 60 8 : slabdata 36 36 346 kmalloc-node 1352 1376 128 32 1 : tunables 120 60 8 : slabdata 43 43 53 kmem_cache 132 147 192 21 1 : tunables 120 60 8 : slabdata 7 7 0 After the patch: ... kmalloc-256 1672 2160 256 16 1 : tunables 120 60 8 : slabdata 135 135 807 kmalloc-192 1992 2016 192 21 1 : tunables 120 60 8 : slabdata 96 96 203 kmalloc-96 1159 1184 128 32 1 : tunables 120 60 8 : slabdata 37 37 116 kmalloc-64 2561 4864 64 64 1 : tunables 120 60 8 : slabdata 76 76 785 kmalloc-32 4253 4340 32 124 1 : tunables 120 60 8 : slabdata 35 35 270 kmalloc-128 1256 1280 128 32 1 : tunables 120 60 8 : slabdata 40 40 39 kmem_cache 125 147 192 21 1 : tunables 120 60 8 : slabdata 7 7 0 [vbabka@suse.cz: export the whole kmalloc_info structure instead of just a name accessor, per Christoph Lameter] Link: http://lkml.kernel.org/r/54e80303-b814-4232-66d4-95b34d3eb9d0@suse.cz Link: http://lkml.kernel.org/r/20170203181008.24898-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22mm/slub: add a dump_stack() to the unexpected GFP checkBorislav Petkov
We wish to know who is doing such a thing. slab.c does this. Link: http://lkml.kernel.org/r/20170116091643.15260-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22slub: do not merge cache if slub_debug contains a never-merge flagGrygorii Maistrenko
In case CONFIG_SLUB_DEBUG_ON=n, find_mergeable() gets debug features from commandline but never checks if there are features from the SLAB_NEVER_MERGE set. As a result selected by slub_debug caches are always mergeable if they have been created without a custom constructor set or without one of the SLAB_* debug features on. This moves the SLAB_NEVER_MERGE check below the flags update from commandline to make sure it won't merge the slab cache if one of the debug features is on. Link: http://lkml.kernel.org/r/20170101124451.GA4740@lp-laptop-d Signed-off-by: Grygorii Maistrenko <grygoriimkd@gmail.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22kernel/watchdog.c: do not hardcode CPU 0 as the initial threadPrarit Bhargava
When CONFIG_BOOTPARAM_HOTPLUG_CPU0 is enabled, the socket containing the boot cpu can be replaced. During the hot add event, the message NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. is output implying that the NMI watchdog was disabled at some point. This is not the case and the message has caused confusion for users of systems that support the removal of the boot cpu socket. The watchdog code is coded to assume that cpu 0 is always the first cpu to initialize the watchdog, and the last to stop its watchdog thread. That is not the case for initializing if cpu 0 has been removed and added. The removal case has never been correct because the smpboot code will remove the watchdog threads starting with the lowest cpu number. This patch adds watchdog_cpus to track the number of cpus with active NMI watchdog threads so that the first and last thread can be used to set and clear the value of firstcpu_err. firstcpu_err is set when the first watchdog thread is enabled, and cleared when the last watchdog thread is disabled. Link: http://lkml.kernel.org/r/1480425321-32296-1-git-send-email-prarit@redhat.com Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Joshua Hunt <johunt@akamai.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Babu Moger <babu.moger@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-229p: fix a potential acl leakCong Wang
posix_acl_update_mode() could possibly clear 'acl', if so we leak the memory pointed by 'acl'. Save this pointer before calling posix_acl_update_mode() and release the memory if 'acl' really gets cleared. Link: http://lkml.kernel.org/r/1486678332-2430-1-git-send-email-xiyou.wangcong@gmail.com Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reported-by: Mark Salyzyn <salyzyn@android.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Greg Kurz <groug@kaod.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22block: use for_each_thread() in sys_ioprio_set()/sys_ioprio_get()Tetsuo Handa
IOPRIO_WHO_USER case in sys_ioprio_set()/sys_ioprio_get() are using while_each_thread(), which is unsafe under RCU lock according to commit 0c740d0afc3bff0a ("introduce for_each_thread() to replace the buggy while_each_thread()"). Use for_each_thread() (via for_each_process_thread()) which is safe under RCU lock. Link: http://lkml.kernel.org/r/201702011947.DBD56740.OMVHOLOtSJFFFQ@I-love.SAKURA.ne.jp Link: http://lkml.kernel.org/r/1486041779-4401-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22parisc: use generic current.hDavidlohr Bueso
Given that the arch does not add its own implementations, simply use the asm-generic/current.h (generic-y) header instead of duplicating code. Link: http://lkml.kernel.org/r/1485992878-4780-4-git-send-email-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22ocfs2: fix deadlock issue when taking inode lock at vfs entry pointsEric Ren
Commit 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()") results in a deadlock, as the author "Tariq Saeed" realized shortly after the patch was merged. The discussion happened here https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html The reason why taking cluster inode lock at vfs entry points opens up a self deadlock window, is explained in the previous patch of this series. So far, we have seen two different code paths that have this issue. 1. do_sys_open may_open inode_permission ocfs2_permission ocfs2_inode_lock() <=== take PR generic_permission get_acl ocfs2_iop_get_acl ocfs2_inode_lock() <=== take PR 2. fchmod|fchmodat chmod_common notify_change ocfs2_setattr <=== take EX posix_acl_chmod get_acl ocfs2_iop_get_acl <=== take PR ocfs2_iop_set_acl <=== take EX Fixes them by adding the tracking logic (in the previous patch) for these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(), ocfs2_setattr(). Link: http://lkml.kernel.org/r/20170117100948.11657-3-zren@suse.com Signed-off-by: Eric Ren <zren@suse.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lockEric Ren
We are in the situation that we have to avoid recursive cluster locking, but there is no way to check if a cluster lock has been taken by a precess already. Mostly, we can avoid recursive locking by writing code carefully. However, we found that it's very hard to handle the routines that are invoked directly by vfs code. For instance: const struct inode_operations ocfs2_file_iops = { .permission = ocfs2_permission, .get_acl = ocfs2_iop_get_acl, .set_acl = ocfs2_iop_set_acl, }; Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR): do_sys_open may_open inode_permission ocfs2_permission ocfs2_inode_lock() <=== first time generic_permission get_acl ocfs2_iop_get_acl ocfs2_inode_lock() <=== recursive one A deadlock will occur if a remote EX request comes in between two of ocfs2_inode_lock(). Briefly describe how the deadlock is formed: On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in BAST(ocfs2_generic_handle_bast) when downconvert is started on behalf of the remote EX lock request. Another hand, the recursive cluster lock (the second one) will be blocked in in __ocfs2_cluster_lock() because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why? because there is no chance for the first cluster lock on this node to be unlocked - we block ourselves in the code path. The idea to fix this issue is mostly taken from gfs2 code. 1. introduce a new field: struct ocfs2_lock_res.l_holders, to keep track of the processes' pid who has taken the cluster lock of this lock resource; 2. introduce a new flag for ocfs2_inode_lock_full: OCFS2_META_LOCK_GETBH; it means just getting back disk inode bh for us if we've got cluster lock. 3. export a helper: ocfs2_is_locked_by_me() is used to check if we have got the cluster lock in the upper code path. The tracking logic should be used by some of the ocfs2 vfs's callbacks, to solve the recursive locking issue cuased by the fact that vfs routines can call into each other. The performance penalty of processing the holder list should only be seen at a few cases where the tracking logic is used, such as get/set acl. You may ask what if the first time we got a PR lock, and the second time we want a EX lock? fortunately, this case never happens in the real world, as far as I can see, including permission check, (get|set)_(acl|attr), and the gfs2 code also do so. [sfr@canb.auug.org.au remove some inlines] Link: http://lkml.kernel.org/r/20170117100948.11657-2-zren@suse.com Signed-off-by: Eric Ren <zren@suse.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22score: remove asm/current.hDavidlohr Bueso
... it's already using the generic version anyways, so just drop the file as do the other archs that do not implement their own version of the current macro. Link: http://lkml.kernel.org/r/1485992878-4780-5-git-send-email-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22m32r: fix build warningSudip Mukherjee
Some m32r builds were having a warning: arch/m32r/include/asm/cmpxchg.h:191:3: warning: value computed is not used arch/m32r/include/asm/cmpxchg.h:68:3: warning: value computed is not used Taking the idea from commit e001bbae7147 ("ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations") the m32r implementation is changed to use a similar construct with a compound expression instead of a typecast, which causes the compiler to not complain about an unused result. Link: http://lkml.kernel.org/r/1484432664-7015-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22m32r: use generic current.hDavidlohr Bueso
Given that the arch does not add its own implementations, simply use the asm-generic/current.h (generic-y) header instead of duplicating code. Link: http://lkml.kernel.org/r/1482896994-25863-1-git-send-email-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22scripts/tags.sh: include arch/Kconfig* for tags generationHou Tao
Kconfig files under arch/ directory are ignored by all_kconfigs(), so include them for tags generation. Link: http://lkml.kernel.org/r/1486206053-38223-1-git-send-email-houtao1@huawei.com Signed-off-by: Hou Tao <houtao1@huawei.com> Cc: Michal Marek <mmarek@suse.com> Cc: Joe Perches <joe@perches.com> Cc: Mathieu Maret <mathieu.maret@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22scripts/checkincludes.pl: add exit message for no duplicates foundCheah Kok Cheong
If no duplicates found, inform user. Link: http://lkml.kernel.org/r/1486391275-2843-1-git-send-email-thrust73@gmail.com Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22scripts/checkstack.pl: add support for nios2Tobias Klauser
Adjust checkstack.pl for the nios2 architecture. Link: http://lkml.kernel.org/r/20170116113052.15034-1-tklauser@distanz.ch Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: Ley Foon Tan <lftan@altera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22scripts/Lindent: clean up and optimizeJean Delvare
* Add a few blank lines to improve readability. * Don't call cut 3 times when once is enough. * Drop a useless semicolon. Link: http://lkml.kernel.org/r/20170104140356.162abab2@endymion Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22scripts/spelling.txt: fix incorrect typo-wordsRoss Zwisler
Fix up some incorrect typo-words. [akpm@linux-foundation.org: "licencing" is valid British spelling and should be kept, per Joe] Link: http://lkml.kernel.org/r/1486409689-23335-1-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22scripts/spelling.txt: add several more common spelling mistakesColin Ian King
Lately I've been cleaning up spelling mistakes in kernel error messages and here are some of the more common spelling mistakes that I've found which probably should be added to this list so we don't keep on seeing them appearing again. Link: http://lkml.kernel.org/r/20161209173326.17662-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22tools/vm: add missing Makefile rulesDaniel Thompson
Currently the tools/vm Makefile has a rather arbitrary implicit build rule; page-types is the first value in TARGETS so lets just build that one! Additionally there is no install rule and this is needed for make -C tools vm_install to work properly. Provide a more sensible implicit build rule and a new install rule. Note that the variables names used by the install rule (DESTDIR and sbindir) are copied from prior-art in tools/power/cpupower. Link: http://lkml.kernel.org/r/20170113165630.27541-1-daniel.thompson@linaro.org Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22dma-debug: add comment for failed to check map errorMiles Chen
Add comment for failure to check a map error to help driver developers. Link: http://lkml.kernel.org/r/1484622289-22085-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22mm, dax: change pmd_fault() to take only vmf parameterDave Jiang
pmd_fault() and related functions really only need the vmf parameter since the additional parameters are all included in the vmf struct. Remove the additional parameter and simplify pmd_fault() and friends. Link: http://lkml.kernel.org/r/1484085142-2297-8-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22mm, dax: make pmd_fault() and friends be the same as fault()Dave Jiang
Instead of passing in multiple parameters in the pmd_fault() handler, a vmf can be passed in just like a fault() handler. This will simplify code and remove the need for the actual pmd fault handlers to allocate a vmf. Related functions are also modified to do the same. [dave.jiang@intel.com: fix issue with xfs_tests stall when DAX option is off] Link: http://lkml.kernel.org/r/148469861071.195597.3619476895250028518.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/1484085142-2297-7-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22dax: add tracepoints to dax_pmd_insert_mapping()Ross Zwisler
Add tracepoints to dax_pmd_insert_mapping(), following the same logging conventions as the tracepoints in dax_iomap_pmd_fault(). Here is an example PMD fault showing the new tracepoints: big-1504 [001] .... 326.960743: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003 big-1504 [001] .... 326.960753: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 big-1504 [001] .... 326.960981: dax_pmd_insert_mapping: dev 259:0 ino 0x1003 shared write address 0x10505000 length 0x200000 pfn 0x100600 DEV|MAP radix_entry 0xc000e big-1504 [001] .... 326.960986: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 NOPAGE Link: http://lkml.kernel.org/r/1484085142-2297-6-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22dax: add tracepoints to dax_pmd_load_hole()Ross Zwisler
Add tracepoints to dax_pmd_load_hole(), following the same logging conventions as the tracepoints in dax_iomap_pmd_fault(). Here is an example PMD fault showing the new tracepoints: read_big-1478 [004] .... 238.242188: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003 read_big-1478 [004] .... 238.242191: dax_pmd_fault: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10400000 vm_start 0x10200000 vm_end 0x10600000 pgoff 0x200 max_pgoff 0x1400 read_big-1478 [004] .... 238.242390: dax_pmd_load_hole: dev 259:0 ino 0x1003 shared address 0x10400000 zero_page ffffea0002c20000 radix_entry 0x1e read_big-1478 [004] .... 238.242392: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10400000 vm_start 0x10200000 vm_end 0x10600000 pgoff 0x200 max_pgoff 0x1400 NOPAGE Link: http://lkml.kernel.org/r/1484085142-2297-5-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22dax: update MAINTAINERS entries for FS DAXRoss Zwisler
Add the new include/trace/events/fs_dax.h tracepoint header, the existing include/linux/dax.h header, update Matthew's email address and add myself as a maintainer for filesystem DAX. Link: http://lkml.kernel.org/r/1484085142-2297-4-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22dax: add tracepoint infrastructure, PMD tracingRoss Zwisler
Tracepoints are the standard way to capture debugging and tracing information in many parts of the kernel, including the XFS and ext4 filesystems. Create a tracepoint header for FS DAX and add the first DAX tracepoints to the PMD fault handler. This allows the tracing for DAX to be done in the same way as the filesystem tracing so that developers can look at them together and get a coherent idea of what the system is doing. I added both an entry and exit tracepoint because future patches will add tracepoints to child functions of dax_iomap_pmd_fault() like dax_pmd_load_hole() and dax_pmd_insert_mapping(). We want those messages to be wrapped by the parent function tracepoints so the code flow is more easily understood. Having entry and exit tracepoints for faults also allows us to easily see what filesystems functions were called during the fault. These filesystem functions get executed via iomap_begin() and iomap_end() calls, for example, and will have their own tracepoints. For PMD faults we primarily want to understand the type of mapping, the fault flags, the faulting address and whether it fell back to 4k faults. If it fell back to 4k faults the tracepoints should let us understand why. I named the new tracepoint header file "fs_dax.h" to allow for device DAX to have its own separate tracing header in the same directory at some point. Here is an example output for these events from a successful PMD fault: big-1441 [005] .... 32.582758: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003 big-1441 [005] .... 32.582776: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 big-1441 [005] .... 32.583292: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 NOPAGE Link: http://lkml.kernel.org/r/1484085142-2297-3-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22tracing: add __print_flags_u64()Ross Zwisler
Patch series "DAX tracepoints, mm argument simplification", v4. This contains both my DAX tracepoint code and Dave Jiang's MM argument simplifications. Dave's code was written with my tracepoint code as a baseline, so it seemed simplest to keep them together in a single series. This patch (of 7): Add __print_flags_u64() and the helper trace_print_flags_seq_u64() in the same spirit as __print_symbolic_u64() and trace_print_symbols_seq_u64(). These functions allow us to print symbols associated with flags that are 64 bits wide even on 32 bit machines. These will be used by the DAX code so that we can print the flags set in a pfn_t such as PFN_SG_CHAIN, PFN_SG_LAST, PFN_DEV and PFN_MAP. Without this new function I was getting errors like the following when compiling for i386: include/linux/pfn_t.h:13:22: warning: large integer implicitly truncated to unsigned type [-Woverflow] #define PFN_SG_CHAIN (1ULL << (BITS_PER_LONG_LONG - 1)) ^ Link: http://lkml.kernel.org/r/1484085142-2297-2-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22scsi: simplify scsi_execute_req_flagsChristoph Hellwig
Add a sshdr argument to __scsi_execute so that we can decode the sense data directly into the sense header instead of needing a copy of it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: make the sense header argument to scsi_test_unit_ready mandatoryChristoph Hellwig
It's a tiny structure that can be allocated on the stack, don't complicate the code by making it optional. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: sd: improve TUR handling in sd_check_eventsChristoph Hellwig
Remove bogus evaluations of retval and sshdr when the device is offline, and fix a possible NULL pointer dereference by allocating the 8 byte sized sense header on stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: always zero sshdr in scsi_normalize_senseChristoph Hellwig
This gives us a clear state even if a command didn't return sense data. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: scsi_dh_emc: return success in clariion_std_inquiry()Dan Carpenter
We accidentally return an uninitialized variable on success. Fixes: b6ff1b14cdf4 ("[SCSI] scsi_dh: Update EMC handler") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: fix memory leak of sdpk on when gd fails to allocateColin Ian King
On an allocation failure of gd, the current exit path is via out_free_devt which leaves sdpk still allocated and hence it gets leaked. Fix this by correcting the order of resource free'ing with a change in the error exit path labels. Detected by CoverityScan, CID#1399519 ("Resource Leak") Fixes: 0dba1314d4f81115dc ("scsi, block: fix duplicate bdi name registration crashes") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: sd: make sd_devt_release() staticWei Yongjun
Fixes the following sparse warning: drivers/scsi/sd.c:3087:6: warning: symbol 'sd_devt_release' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.Dupuis, Chad
The QLogic FastLinQ Driver for FCoE (qedf) is the FCoE specific module for 41000 Series Converged Network Adapters by QLogic. This patch consists of following changes: - MAINTAINERS Makefile and Kconfig changes for qedf - PCI driver registration - libfc/fcoe host level initialization - SCSI host template initialization and callbacks - Debugfs and log level infrastructure - Link handling - Firmware interface structures - QED core module initialization - Light L2 interface callbacks - I/O request initialization - Firmware I/O completion handling - Firmware ELS request/response handling - FIP request/response handled by the driver itself Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: qla2xxx: Fix Regression introduced by pci_alloc_irq_vectors_affinity call.Michael Hernandez
For target mode, we need to increase minimum vectors value by one to account for ATIO queue. Following stack trace will be seen Call Trace: qla24xx_config_rings+0x15a/0x230 [qla2xxx] qla2x00_init_rings+0x1a1/0x3a0 [qla2xxx] qla2x00_restart_isp+0x5c/0x120 [qla2xxx] qla2x00_abort_isp+0x138/0x430 [qla2xxx] ? __schedule+0x260/0x580 qla2x00_do_dpc+0x3bc/0x920 [qla2xxx] ? qla2x00_relogin+0x290/0x290 [qla2xxx] ? schedule+0x3a/0xa0 ? qla2x00_relogin+0x290/0x290 [qla2xxx] kthread+0x103/0x140 ? __kthread_init_worker+0x40/0x40 ret_from_fork+0x29/0x40 RIP: qlt_24xx_config_rings+0x6c/0x90 [mkp: fixed Fixes: hash] Cc: <stable@vger.kernel.org> Fixes: 17e5fc58588b ("scsi: qla2xxx: fix MSI-X vector affinity") Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: qla2xxx: Fix response queue count for Target mode.Michael Hernandez
Target mode initialization was not calculating response queue values correctly resulting into one less MSI-X vector. [mkp: fixed Fixes: hash] Cc: <stable@vger.kernel.org> Fixes: 093df73771ba ("scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.") Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: qla2xxx: Cleaned up queue configuration code.Michael Hernandez
This patch cleaned up queue configuration code, such that once initialized, we should not touch msix_count value. This will prevent incorrect numbers of MSI-X vectors requested while performing target mode configuration. [mkp: fixed Fixes: hash] Cc: <stable@vger.kernel.org> Fixes: d74595278f4a ("scsi: qla2xxx: Add multiple queue pair functionality.") Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22Btrfs: use the correct type when creating cow dio extentLiu Bo
'BTRFS_ORDERED_REGULAR' was introduced for the cow case in patch 'Btrfs: specify a new ordered extent type for create_io_em', but it missed the directIO cow case. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-02-22Btrfs: fix deadlock between dedup on same file and starting writebackFilipe Manana
If we are deduping two ranges of the same file we need to make sure that we lock all pages in ascending order, that is, lock first the pages from the range with lower offset and then the pages from the other range, as otherwise we can deadlock with a concurrent task that is starting delalloc (writeback). Example trace: [74073.052218] INFO: task kworker/u32:10:17997 blocked for more than 120 seconds. [74073.053889] Tainted: G W 4.9.0-rc7-btrfs-next-36+ #1 [74073.055071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [74073.056696] kworker/u32:10 D 0 17997 2 0x00000000 [74073.058606] Workqueue: writeback wb_workfn (flush-btrfs-53176) [74073.061370] ffff880031e79858 ffff8802159d2580 ffff880237004580 ffff880031e79240 [74073.064784] ffff88023f4978c0 ffffc9000817b638 ffffffff814c15e1 0000000000000000 [74073.068386] ffff88023f4978d8 ffff88023f4978c0 000000000017b620 ffff880031e79240 [74073.071712] Call Trace: [74073.072884] [<ffffffff814c15e1>] ? __schedule+0x48f/0x6f4 [74073.075395] [<ffffffff814c1c8b>] ? bit_wait+0x2f/0x2f [74073.077511] [<ffffffff814c18d2>] schedule+0x8c/0xa0 [74073.079440] [<ffffffff814c4b36>] schedule_timeout+0x43/0xff [74073.081637] [<ffffffff8110953e>] ? time_hardirqs_on+0x9/0x14 [74073.083809] [<ffffffff81095c67>] ? trace_hardirqs_on_caller+0x16/0x197 [74073.086314] [<ffffffff810bde98>] ? timekeeping_get_ns+0x1e/0x32 [74073.100654] [<ffffffff810be048>] ? ktime_get+0x41/0x52 [74073.102619] [<ffffffff814c10f0>] io_schedule_timeout+0xa0/0x102 [74073.104771] [<ffffffff814c10f0>] ? io_schedule_timeout+0xa0/0x102 [74073.106969] [<ffffffff814c1ca6>] bit_wait_io+0x1b/0x39 [74073.108954] [<ffffffff814c1fb8>] __wait_on_bit_lock+0x4f/0x99 [74073.110981] [<ffffffff8112b692>] __lock_page+0x6b/0x6d [74073.112833] [<ffffffff8108ceb4>] ? autoremove_wake_function+0x3a/0x3a [74073.115010] [<ffffffffa031178b>] lock_page+0x2f/0x32 [btrfs] [74073.116999] [<ffffffffa0311d9f>] lock_delalloc_pages+0xc7/0x1a0 [btrfs] [74073.119243] [<ffffffffa0313d15>] find_lock_delalloc_range+0xc3/0x1a4 [btrfs] [74073.121636] [<ffffffffa0313e81>] writepage_delalloc.isra.31+0x8b/0x134 [btrfs] [74073.124229] [<ffffffffa0315d69>] __extent_writepage+0x1c1/0x2bf [btrfs] [74073.126372] [<ffffffffa03160f2>] extent_write_cache_pages.isra.30.constprop.49+0x28b/0x36c [btrfs] [74073.129371] [<ffffffffa03165b9>] extent_writepages+0x4b/0x5c [btrfs] [74073.131440] [<ffffffffa02fcb59>] ? insert_reserved_file_extent.constprop.42+0x261/0x261 [btrfs] [74073.134303] [<ffffffff811b4ce4>] ? writeback_sb_inodes+0xe0/0x4a1 [74073.136298] [<ffffffffa02fab7f>] btrfs_writepages+0x28/0x2a [btrfs] [74073.138248] [<ffffffff81138200>] do_writepages+0x23/0x2c [74073.139910] [<ffffffff811b3cab>] __writeback_single_inode+0x105/0x6d2 [74073.142003] [<ffffffff811b4e96>] writeback_sb_inodes+0x292/0x4a1 [74073.136298] [<ffffffffa02fab7f>] btrfs_writepages+0x28/0x2a [btrfs] [74073.138248] [<ffffffff81138200>] do_writepages+0x23/0x2c [74073.139910] [<ffffffff811b3cab>] __writeback_single_inode+0x105/0x6d2 [74073.142003] [<ffffffff811b4e96>] writeback_sb_inodes+0x292/0x4a1 [74073.143911] [<ffffffff811b511b>] __writeback_inodes_wb+0x76/0xae [74073.145787] [<ffffffff811b53ca>] wb_writeback+0x1cc/0x4d7 [74073.147452] [<ffffffff811b60cd>] wb_workfn+0x194/0x37d [74073.149084] [<ffffffff811b60cd>] ? wb_workfn+0x194/0x37d [74073.150726] [<ffffffff8106ce77>] ? process_one_work+0x154/0x4e4 [74073.152694] [<ffffffff8106cf96>] process_one_work+0x273/0x4e4 [74073.154452] [<ffffffff8106d6db>] worker_thread+0x1eb/0x2ca [74073.156138] [<ffffffff8106d4f0>] ? rescuer_thread+0x2b6/0x2b6 [74073.157837] [<ffffffff81072a81>] kthread+0xd5/0xdd [74073.159339] [<ffffffff810729ac>] ? __kthread_unpark+0x5a/0x5a [74073.161088] [<ffffffff814c6257>] ret_from_fork+0x27/0x40 [74073.162680] INFO: lockdep is turned off. [74073.163855] INFO: task do-dedup:30264 blocked for more than 120 seconds. [74073.181180] Tainted: G W 4.9.0-rc7-btrfs-next-36+ #1 [74073.181180] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [74073.185296] fdm-stress D 0 30264 29974 0x00000000 [74073.186810] ffff880089595118 ffff880211b8eac0 ffff880237030380 ffff880089594b00 [74073.188998] ffff88023f2978c0 ffffc900063abb68 ffffffff814c15e1 0000000000000000 [74073.191070] ffff88023f2978d8 ffff88023f2978c0 00000000003abb50 ffff880089594b00 [74073.193286] Call Trace: [74073.193990] [<ffffffff814c15e1>] ? __schedule+0x48f/0x6f4 [74073.195418] [<ffffffff814c1c8b>] ? bit_wait+0x2f/0x2f [74073.196796] [<ffffffff814c18d2>] schedule+0x8c/0xa0 [74073.198163] [<ffffffff814c4b36>] schedule_timeout+0x43/0xff [74073.199621] [<ffffffff81095df5>] ? trace_hardirqs_on+0xd/0xf [74073.201100] [<ffffffff810bde98>] ? timekeeping_get_ns+0x1e/0x32 [74073.202686] [<ffffffff810be048>] ? ktime_get+0x41/0x52 [74073.204051] [<ffffffff814c10f0>] io_schedule_timeout+0xa0/0x102 [74073.205585] [<ffffffff814c10f0>] ? io_schedule_timeout+0xa0/0x102 [74073.207123] [<ffffffff814c1ca6>] bit_wait_io+0x1b/0x39 [74073.208238] [<ffffffff814c1fb8>] __wait_on_bit_lock+0x4f/0x99 [74073.208871] [<ffffffff8112b692>] __lock_page+0x6b/0x6d [74073.209430] [<ffffffff8108ceb4>] ? autoremove_wake_function+0x3a/0x3a [74073.210101] [<ffffffff8112b800>] lock_page+0x2f/0x32 [74073.210636] [<ffffffff8112c502>] pagecache_get_page+0x5e/0x153 [74073.211270] [<ffffffffa03257eb>] gather_extent_pages+0x4e/0x109 [btrfs] [74073.212166] [<ffffffffa032a04c>] btrfs_dedupe_file_range+0x1e1/0x4dd [btrfs] [74073.213257] [<ffffffff8118d9b5>] vfs_dedupe_file_range+0x1c1/0x221 [74073.214086] [<ffffffff8119e0c4>] do_vfs_ioctl+0x442/0x600 [74073.214767] [<ffffffff811a7874>] ? rcu_read_unlock+0x5b/0x5d [74073.215619] [<ffffffff811a7953>] ? __fget+0x6b/0x77 [74073.216338] [<ffffffff8119e2d9>] SyS_ioctl+0x57/0x79 [74073.217149] [<ffffffff814c5fea>] entry_SYSCALL_64_fastpath+0x18/0xad [74073.218102] [<ffffffff81109552>] ? time_hardirqs_off+0x9/0x14 [74073.218968] [<ffffffff810938ce>] ? trace_hardirqs_off_caller+0x1f/0xaa [74073.219938] INFO: lockdep is turned off. What happened was the following: CPU 1 CPU 2 btrfs_dedupe_file_range() --> using same inode as source and target --> src range is [768K, 1Mb[ --> dst range is [0, 256K[ btrfs_cmp_data_prepare() --> calls gather_extent_pages() for range [768K, 1Mb[ and locks all pages in that range do_writepages() btrfs_writepages() extent_writepages() extent_write_cache_pages() __extent_writepage() writepage_delalloc() find_lock_delalloc_range() --> finds range [0, 1Mb[ lock_delalloc_pages() --> locks all pages in the range [0, 768K[ --> tries to lock page at offset 768K --> deadlock --> calls gather_extent_pages() to lock pages in the range [0, 256K[ --> deadlock, task at CPU 1 already locked that range and it's trying to lock the range we locked previously So fix this by making sure that during a dedup we always lock first the pages from the range with lower offset. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-02-22scsi: lpfc: add missing Kconfig NVME dependenciesJames Smart
Add missing Kconfig NVME dependencies. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: Update lpfc version to 11.2.0.7James Smart
Update lpfc version to 11.2.0.7 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: Update copyrightsJames Smart
Update copyrights to 2017 for all files touched in this patch set Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: NVME Target: Add debugfs supportJames Smart
NVME Target: Add debugfs support Adds debugfs snippets to cover the new NVME target functionality Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: NVME Target: bind to nvmet_fc apiJames Smart
NVME Target: Tie in to NVME Fabrics nvmet_fc LLDD target api Adds the routines to: - register and deregister the FC port as a nvmet-fc targetport - binding of nvme queues to adapter WQs - receipt and passing of NVME LS's to transport, sending transport response - receipt of NVME FCP CMD IUs, processing FCP target io data transmission commands; transmission of FCP io response - Abort operations for tgt io exchanges [mkp: fixed space at end of file warning] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: NVME Target: Merge into FC discoveryJames Smart
NVME Target: Merge into FC discovery Adds NVME PRLI handling and Nameserver registrations for NVME Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: NVME Target: Receive buffer updatesJames Smart
NVME Target: Receive buffer updates Allocates buffer pools and configures adapter interfaces to handle receive buffer (asynchronous FCP CMD ius, first burst data) from the adapter. Splits by protocol, etc. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: NVME Target: Base modificationsJames Smart
NVME Target: Base modifications This set of patches adds the base modifications for NVME target support The base modifications consist of: - Additional module parameters or configuration tuning - Enablement of configuration mode for NVME target. Ties into the queueing model put into place by the initiator basemods patches. - Target-specific buffer pools, dma pools, sgl pools [mkp: fixed space at end of file] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: NVME Initiator: Add debugfs supportJames Smart
NVME Initiator: Add debugfs support Adds debugfs snippets to cover the new NVME initiator functionality Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-15 11:19:29 +0000