summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-17gfs2: Use rhashtable walk interface in glock_hash_walkHerbert Xu
The function glock_hash_walk walks the rhashtable by hand. This is broken because if it catches the hash table in the middle of a rehash, then it will miss entries. This patch replaces the manual walk by using the rhashtable walk interface. Fixes: 88ffbf3e037e ("GFS2: Use resizable hash table for glocks") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17dpaa_eth: small leak on errorDan Carpenter
This should be >= instead of > here. It means that we don't increment the free count enough so it becomes off by one. Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: mvneta: make mvneta_eth_tool_ops staticJisheng Zhang
The mvneta_eth_tool_ops is only used internally in mvneta driver, so make it static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge branch 'net-sched-reflect-hw-offload-in-classifiers'David S. Miller
Or Gerlitz says: ==================== net/sched: Reflect HW offload status in classifiers Currently there is no way of querying whether a filter is offloaded to HW or not when using "both" policy (where none of skip_sw or skip_hw flags are set by user-space). Added two new flags, "in hw" and "not in hw" such that user space can determine if a filter is actually offloaded to hw. The "in hw" UAPI semantics was chosen so it's similar to the "skip hw" flag logic. If none of these two flags are set, this signals running over older kernel. As an example, add one vlan push + fwd rule, one matchall rule and one u32 rule without any flags, and another vlan + fwd skip_sw rule, such that the different TC classifier attempt to offload all of them -- all over mlx5 SRIOV VF rep: flower skip_sw indev eth2_0 src_mac e4:11:22:33:44:50 dst_mac e4:1d:2d:a5:f3:9d action vlan push id 52 action mirred egress redirect dev eth2 flower indev eth2_0 src_mac e4:11:22:33:44:50 dst_mac e4:11:22:33:44:51 action vlan push id 53 action mirred egress redirect dev eth2 u32 ht 800: flowid 800:1 match ip src 192.168.1.0/24 action drop Since that VF rep doesn't offload matchall/u32 and can currently offload only one vlan push rule we expect three of the rules not to be offloaded: filter protocol ip pref 99 u32 filter protocol ip pref 99 u32 fh 800: ht divisor 1 filter protocol ip pref 99 u32 fh 800::1 order 1 key ht 800 bkt 0 flowid 800:1 not in_hw match c0a80100/ffffff00 at 12 action order 1: gact action drop random type none pass val 0 index 8 ref 1 bind 1 filter protocol all pref 49150 matchall filter protocol all pref 49150 matchall handle 0x1 not in_hw action order 1: mirred (Egress Mirror to device veth1) pipe index 27 ref 1 bind 1 filter protocol ip pref 49151 flower filter protocol ip pref 49151 flower handle 0x1 indev eth2_0 dst_mac e4:11:22:33:44:51 src_mac e4:11:22:33:44:50 eth_type ipv4 not in_hw action order 1: vlan push id 53 protocol 802.1Q priority 0 pipe index 20 ref 1 bind 1 action order 2: mirred (Egress Redirect to device eth2) stolen index 26 ref 1 bind 1 filter protocol ip pref 49152 flower filter protocol ip pref 49152 flower handle 0x1 indev eth2_0 dst_mac e4:1d:2d:a5:f3:9d src_mac e4:11:22:33:44:50 eth_type ipv4 skip_sw in_hw action order 1: vlan push id 52 protocol 802.1Q priority 0 pipe index 19 ref 1 bind 1 action order 2: mirred (Egress Redirect to device eth2) stolen index 25 ref 1 bind 1 v3 --> v4 changes: - removed extra parenthesis (Dave) v2 --> v3 changes: - fixed the matchall dump flags patch to do proper checks (Jakub) - added the same proper checks to flower where they were missing - that flower patch was added as #1 and hence all the other patches are offed-by-one v1 --> v2 changes: - applied feedback from Jakub and Dave -- where none of the skip flags were set, the suggested approach didn't allow user space to distringuish between old kernel to a case when offloading to HW worked fine. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_bpf: Reflect HW offload statusOr Gerlitz
BPF classifier support for the "in hw" offloading flags. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_u32: Reflect HW offload statusOr Gerlitz
U32 support for the "in hw" offloading flags. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_matchall: Reflect HW offloading statusOr Gerlitz
Matchall support for the "in hw" offloading flags. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_flower: Reflect HW offload statusOr Gerlitz
Flower support for the "in hw" offloading flags. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: Reflect HW offload statusOr Gerlitz
Currently there is no way of querying whether a filter is offloaded to HW or not when using "both" policy (where none of skip_sw or skip_hw flags are set by user-space). Add two new flags, "in hw" and "not in hw" such that user space can determine if a filter is actually offloaded to hw or not. The "in hw" UAPI semantics was chosen so it's similar to the "skip hw" flag logic. If none of these two flags are set, this signals running over older kernel. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_matchall: Dump the classifier flagsOr Gerlitz
The classifier flags are not dumped to user-space, do that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_flower: Properly handle classifier flags dumpingOr Gerlitz
Dump the classifier flags only if non zero and make sure to check the return status of the handler that puts them into the netlink msg. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: oki-semi: pch_gbe: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge tag 'mvebu-dt-4.11-4' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann
Pull "mvebu dt for 4.11 (part 4)" from Gregory CLEMENT: Fix typos introduced during the preparation of the 4.11 merge window. * tag 'mvebu-dt-4.11-4' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-385-linksys: fix DSA compatible property ARM: dts: Fix typo in armada-xp-98dx4251
2017-02-17Merge tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux ↵Arnd Bergmann
into fixes Pull "Reset controller fixes for v4.10" from Philipp Zabel: - Remove erroneous negation of the error check of the reset function to decrement trigger_count in the error case, not on success. This fixes shared resets to actually only trigger once, as intended. * tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux: reset: fix shared reset triggered_count decrement on error
2017-02-17net: ethernet: ti: cpsw: correct ale dev to cpswIvan Khoronzhuk
The ale is a property of cpsw, so change dev to cpsw->dev, aka pdev->dev, to be consistent. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17packet: Do not call fanout_release from atomic contextsAnoob Soman
Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: nvidia: forcedeth: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge branch 'ptp-attribute-cleanup'David S. Miller
Dmitry Torokhov says: ==================== PTP attribute handling cleanup PTP core was creating some attributes, such as "period" and "fifo", and the entire "pins" attribute group, after creating class deevice, which creates a race for userspace: uevent may arrive before all attributes are created. This series of patches switches PTP to use is_visible() to control visibility of attributes in a group, and device_create_with_groups() to ensure that attributes are created before we notify userspace of a new device. v2: - added Richard's acked-by to patch #1 - removed use of kmalloc_array in favor of kcalloc in patch #2 at Richard's request - added a cover letter v1: - initial patch set ==================== Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17ptp: create "pins" together with the rest of attributesDmitry Torokhov
Let's switch to using device_create_with_groups(), which will allow us to create "pins" attribute group together with the rest of ptp device attributes, and before userspace gets notified about ptp device creation. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17ptp: use is_visible method to hide unused attributesDmitry Torokhov
Instead of creating selected attributes after the device is created (and after userspace potentially seen uevent), lets use attribute group is_visible() method to control which attributes are shown. This will allow us to create all attributes (except "pins" group, which will be taken care of later) before userspace gets notified about new ptp class device. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17ptp: use kcalloc when allocating arraysDmitry Torokhov
kcalloc is more semantically correct when allocating arrays of objects, and overflow-safe. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17ptp: do not explicitly set drvdata in ptp_clock_register()Dmitry Torokhov
We do not need explicitly call dev_set_drvdata(), as it is done for us by device_create(). Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17perf tools: Replace _SC_NPROCESSORS_CONF with max_present_cpu in ↵Jan Stancek
cpu_topology_map There are 2 problems wrt. cpu_topology_map on systems with sparse CPUs: 1. offline/absent CPUs will have their socket_id and core_id set to -1 which triggers: "socket_id number is too big.You may need to upgrade the perf tool." 2. size of cpu_topology_map (perf_env.cpu[]) is allocated based on _SC_NPROCESSORS_CONF, but can be indexed with CPU ids going above. Users of perf_env.cpu[] are using CPU id as index. This can lead to read beyond what was allocated: ==19991== Invalid read of size 4 ==19991== at 0x490CEB: check_cpu_topology (topology.c:69) ==19991== by 0x490CEB: test_session_topology (topology.c:106) ... For example: _SC_NPROCESSORS_CONF == 16 available: 2 nodes (0-1) node 0 cpus: 0 6 8 10 16 22 24 26 node 0 size: 12004 MB node 0 free: 9470 MB node 1 cpus: 1 7 9 11 23 25 27 node 1 size: 12093 MB node 1 free: 9406 MB node distances: node 0 1 0: 10 20 1: 20 10 This patch changes HEADER_NRCPUS.nr_cpus_available from _SC_NPROCESSORS_CONF to max_present_cpu and updates any user of cpu_topology_map to iterate with nr_cpus_avail. As a consequence HEADER_CPU_TOPOLOGY core_id and socket_id lists get longer, but maintain compatibility with pre-patch state - index to cpu_topology_map is CPU id. perf test 36 -v 36: Session topology : --- start --- test child forked, pid 22211 templ file: /tmp/perf-test-gmdX5i CPU 0, core 0, socket 0 CPU 1, core 0, socket 1 CPU 6, core 10, socket 0 CPU 7, core 10, socket 1 CPU 8, core 1, socket 0 CPU 9, core 1, socket 1 CPU 10, core 9, socket 0 CPU 11, core 9, socket 1 CPU 16, core 0, socket 0 CPU 22, core 10, socket 0 CPU 23, core 10, socket 1 CPU 24, core 1, socket 0 CPU 25, core 1, socket 1 CPU 26, core 9, socket 0 CPU 27, core 9, socket 1 test child finished with 0 ---- end ---- Session topology: Ok Signed-off-by: Jan Stancek <jstancek@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/d7c05c6445fca74a8442c2c73cfffd349c52c44f.1487146877.git.jstancek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17mlx4: do not fire tasklet unless necessaryEric Dumazet
All rx and rx netdev interrupts are handled by respectively by mlx4_en_rx_irq() and mlx4_en_tx_irq() which simply schedule a NAPI. But mlx4_eq_int() also fires a tasklet to service all items that were queued via mlx4_add_cq_to_tasklet(), but this handler was not called unless user cqe was handled. This is very confusing, as "mpstat -I SCPU ..." show huge number of tasklet invocations. This patch saves this overhead, by carefully firing the tasklet directly from mlx4_add_cq_to_tasklet(), removing four atomic operations per IRQ. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17perf header: Make build_cpu_topology skip offline/absent CPUsJan Stancek
When build_cpu_topo() encounters offline/absent CPUs, it fails to find any sysfs entries and returns failure. This leads to build_cpu_topology() and write_cpu_topology() failing as well. Because HEADER_CPU_TOPOLOGY has not been written, read leaves cpu_topology_map NULL and we get NULL ptr deref at: ... cmd_test __cmd_test test_and_print run_test test_session_topology check_cpu_topology 36: Session topology : --- start --- test child forked, pid 14902 templ file: /tmp/perf-test-4CKocW failed to write feature HEADER_CPU_TOPOLOGY perf: Segmentation fault Obtained 9 stack frames. ./perf(sighandler_dump_stack+0x41) [0x5095f1] /lib64/libc.so.6(+0x35250) [0x7f4b7c3c9250] ./perf(test_session_topology+0x1db) [0x490ceb] ./perf() [0x475b68] ./perf(cmd_test+0x5b9) [0x4763c9] ./perf() [0x4945a3] ./perf(main+0x69f) [0x427e8f] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f4b7c3b5b35] ./perf() [0x427fb9] test child interrupted ---- end ---- Session topology: FAILED! This patch makes build_cpu_topology() skip offline/absent CPUs, by checking their presence against cpu_map built from online CPUs. Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/a271b770175524f4961d4903af33798358a4a518.1487146877.git.jstancek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17perf cpumap: Add cpu__max_present_cpu()Jan Stancek
Similar to cpu__max_cpu() (which returns the max possible CPU), returns the max present CPU. Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/8ea4601b5cacc49927235b4ebac424bd6eeccb06.1487146877.git.jstancek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17perf session: Fix DEBUG=1 build with clangArnaldo Carvalho de Melo
The struct branch_stack->branch_stack.cycles field is a u64 :16 bitfield, and this somehow confuses clang 4.0 when checking the arguments of a printf format, so cast the :16 to unsigned short to help it. Silences this: util/session.c:935:4: error: format specifies type 'unsigned short' but the argument has type 'u64' (aka 'unsigned long') [-Werror,-Wformat] e->flags.cycles, ^~~~~~~~~~~~~~~ 1 error generated. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-eo2t4uhlbne105z72tvyzkp1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17tracing: Remove outdated ring buffer commentJoel Fernandes
The comment about ring buffer's organization is outdated and the code sits elsewhere, remove the comment. Link: http://lkml.kernel.org/r/20170217041058.23904-1-joelaf@google.com Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Joel Fernandes <joelaf@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-02-17tools lib traceevent: It's preempt not premptSteven Rostedt (VMware)
Fix the typo of the function name pevent_data_prempt_count() Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Fixes: c52d9e4e677b ("tools lib traceevent: Add retrieval of preempt count and latency flags") Link: http://lkml.kernel.org/r/20170216201352.469c99de@grimm.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17perf python: Filter out -specs=/a/b/c from the python binding cc optionsArnaldo Carvalho de Melo
The -spec=/path/to/file can be used to change what gcc puts in the cc, ld, etc command lines, but this is not present in clang, filter it out at the setup.py file by changing python2's internal variable where it keeps its initial CFLAGS value. With this all of perf can be built in at least Fedora 25, fixing this problem: GEN /tmp/build/perf/python/perf.so CC /tmp/build/perf/builtin-buildid-list.o clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument] clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument] error: command 'clang' failed with exit status 1 Now I need to change all the containers where I have clang to build perf with it, so that we can check that in other distros (opensuse, debian, ubuntu, etc) this also works. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-g9lhgr162ao8ao29vvf0hgm1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17tools perf scripting python: clang doesn't have -spec, remove itArnaldo Carvalho de Melo
Gcc has a -spec option to override what options to pass to cc, etc, and in some distros this is used, like in fedora, where we end up getting this passed to gcc that makes clang, that doesn't have this option to stop the build: CC /tmp/build/perf/util/scripting-engines/trace-event-python.o clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument] So filter this out when the compiler used is clang, this way we can build the python scripting support in tools/perf/. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-2gosxoiouf24pnlknp7w7q4z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tablesRobert Schiele
Not every toolchain has -fno-asynchronous-unwind-tables per default on MIPS. This patch specifies the necessary option explicitly for VDSO library build. This prevents the following build failure: GENVDSO arch/mips/vdso/vdso-image.c arch/mips/vdso/genvdso: 'arch/mips/vdso/vdso.so.dbg' contains relocation sections .../arch/mips/vdso/Makefile:84: recipe for target 'arch/mips/vdso/vdso-image.c' failed Signed-off-by: Robert Schiele <rschiele@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15127/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-17KVM: Return an error code only as a constant in kvm_get_dirty_log()Markus Elfring
* Return an error code without storing it in an intermediate variable. * Delete the local variable "r" and the jump label "out" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-17KVM: Return an error code only as a constant in kvm_get_dirty_log_protect()Markus Elfring
* Return an error code without storing it in an intermediate variable. * Delete the local variable "r" and the jump label "out" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-17KVM: Return directly after a failed copy_from_user() in kvm_vm_compat_ioctl()Markus Elfring
* Return directly after a call of the function "copy_from_user" failed in a case block. This issue was detected by using the Coccinelle software. * Delete the jump label "out" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-17KVM: x86: remove code for lazy FPU handlingPaolo Bonzini
The FPU is always active now when running KVM. Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Bandan Das <bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-17KVM: race-free exit from KVM_RUN without POSIX signalsPaolo Bonzini
The purpose of the KVM_SET_SIGNAL_MASK API is to let userspace "kick" a VCPU out of KVM_RUN through a POSIX signal. A signal is attached to a dummy signal handler; by blocking the signal outside KVM_RUN and unblocking it inside, this possible race is closed: VCPU thread service thread -------------------------------------------------------------- check flag set flag raise signal (signal handler does nothing) KVM_RUN However, one issue with KVM_SET_SIGNAL_MASK is that it has to take tsk->sighand->siglock on every KVM_RUN. This lock is often on a remote NUMA node, because it is on the node of a thread's creator. Taking this lock can be very expensive if there are many userspace exits (as is the case for SMP Windows VMs without Hyper-V reference time counter). As an alternative, we can put the flag directly in kvm_run so that KVM can see it: VCPU thread service thread -------------------------------------------------------------- raise signal signal handler set run->immediate_exit KVM_RUN check run->immediate_exit Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-17spi: ti-qspi: revise ti_qspi_probe() failure flowPrahlad V
call spi_master_put() in case of failures after spi_alloc_master(). call pm_runtime_disable() in case of failures after pm_runtime_enable(). Signed-off-by: Prahlad V <prahlad.eee@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-17ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machineJeeja KP
After the pcm jack is created, create and initialize the pin switch widget for each port. Pin switch is to enable/disable the pin when monitor is connected/disconnected. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-17powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable()Gavin Shan
The local variable @iov isn't used, to remove it. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-17powerpc/kernel: Remove error message in pcibios_setup_phb_resources()Gavin Shan
The CAPI driver creates virtual PHB (vPHB) from the CAPI adapter. The vPHB's IO and memory windows aren't built from device-tree node as we do for normal PHBs. A error message is thrown in below path when trying to probe AFUs contained in the adapter. The error message is confusing and unnecessary. cxl_probe() pci_init_afu() cxl_pci_vphb_add() pcibios_scan_phb() pcibios_setup_phb_resources() This removes the error message. We might have the case where the first memory window on real PHB isn't populated properly because of error in "ranges" property in the device-tree node. We can check the device-tree instead for that. This also removes one unnecessary blank line in the function. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-17MIPS: BCM47XX: Fix button inversion for Asus WL-500WMirko Parthey
The Asus WL-500W buttons are active high, but the software treats them as active low. Fix the inverted logic. Fixes: 3be972556fa1 ("MIPS: BCM47XX: Import buttons database from OpenWrt") Signed-off-by: Mirko Parthey <mirko.parthey@web.de> Acked-by: Rafał Miłecki <rafal@milecki.pl> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.14.x- Patchwork: https://patchwork.linux-mips.org/patch/15295/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-17MIPS: DTS: Add img directory to MakefileIan Pozella
An img directory exists for the Pistchio SoC device tree but the directory itself isn't in the dts Makefile meaning the dtbs never get built. Fixes: daa10170da27 ("MIPS: DTS: img: add device tree for Marduk board") Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com> Reviewed-by: Rahul Bedarkar <Rahul.Bedarkar@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15309/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-17powerpc/mm: Fix typo in set_pte_at()Gavin Shan
This fixes the typo about the _PAGE_PTE in set_pte_at() by changing "tryint" to "trying to". Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-17MIPS: ip27: Disable qlge driver in defconfigArnd Bergmann
One of the last remaining failures in kernelci.org is for a gcc bug: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190 This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot reproduce the problem here. However, it is clear that ip27_defconfig does not actually need this driver as the platform has only PCI-X but not PCIe, and the qlge adapter in turn is PCIe-only. The driver was originally enabled in 2010 along with lots of other drivers. Fixes: 59d302b342e5 ("MIPS: IP27: Make defconfig useful again.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15197/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-17MIPS: pic32mzda: Fix linker error for pic32_get_pbclk()Purna Chandra Mandal
Early clock API pic32_get_pbclk() is defined in early_clk.c and used by time.c and early_console.c. When CONFIG_EARLY_PRINTK isn't set, early_clk.c isn't compiled and time.c fails to link. Fix it by compiling early_clk.c always. Also sort files in alphabetical order. Fixes: 6e4ad1b41360 ("MIPS: pic32mzda: fix getting timer clock rate.") Reported-by: Harvey Hunt <harvey.hunt@imgtec.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.7.x- Patchwork: https://patchwork.linux-mips.org/patch/13383/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-17MIPS: Lantiq: Keep ethernet enabled during bootFelix Fietkau
Disabling ethernet during reboot (only to enable it again when the ethernet driver attaches) can put the chip into a faulty state where it corrupts the header of all incoming packets. This happens if packets arrive during the time window where the core is disabled, and it can be easily reproduced by rebooting while sending a flood ping to the broadcast address. Fixes: 95135bfa7ead ("MIPS: Lantiq: Deactivate most of the devices by default") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: John Crispin <john@phrozen.org> Cc: hauke.mehrtens@lantiq.com Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/15078/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-17MIPS: OCTEON: Fix copy_from_user fault handling for large buffersJames Cowgill
If copy_from_user is called with a large buffer (>= 128 bytes) and the userspace buffer refers partially to unreadable memory, then it is possible for Octeon's copy_from_user to report the wrong number of bytes have been copied. In the case where the buffer size is an exact multiple of 128 and the fault occurs in the last 64 bytes, copy_from_user will report that all the bytes were copied successfully but leave some garbage in the destination buffer. The bug is in the main __copy_user_common loop in octeon-memcpy.S where in the middle of the loop, src and dst are incremented by 128 bytes. The l_exc_copy fault handler is used after this but that assumes that "src < THREAD_BUADDR($28)". This is not the case if src has already been incremented. Fix by adding an extra fault handler which rewinds the src and dst pointers 128 bytes before falling though to l_exc_copy. Thanks to the pwritev test from the strace test suite for originally highlighting this bug! Fixes: 5b3b16880f40 ("MIPS: Add Cavium OCTEON processor support ...") Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14978/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-17MIPS: Fix special case in 64 bit IP checksumming.Ralf Baechle
For certain arguments such as saddr = 0xc0a8fd60, daddr = 0xc0a8fda1, len = 80, proto = 17, sum = 0x7eae049d there will be a carry when folding the intermediate 64 bit checksum to 32 bit but the code doesn't add the carry back to the one's complement sum, thus an incorrect result will be generated. Reported-by: Mark Zhang <bomb.zhang@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: stable@vger.kernel.org Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-17pci/hotplug/pnv-php: Disable MSI and PCI device properlyGavin Shan
pnv_php_disable_irq() can be called in two paths: Bailing path in pnv_php_enable_irq() or releasing slot. The MSI (or MSIx) interrupts is disabled unconditionally in pnv_php_disable_irq(). It's wrong because that might be enabled by drivers other than pnv-php. This disables MSI (or MSIx) interrupts and the PCI device only if it was enabled by pnv-php. In the error path of pnv_php_enable_irq(), we rely on the newly added parameter @disable_device. In the path of releasing slot, @pnv_php->irq is checked. Cc: <stable@vger.kernel.org> # v4.9+ Fixes: 360aebd85a4c ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-22 01:48:36 +0000