| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, any time we failed to get a journal reservation we'd retry,
with the journal lock held; but this isn't necessary given
wait_event()/wake_up() ordering.
This avoids performance cliffs when the journal starts to get backed up
and lock contention shoots up.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't want journal write completions to be blocked behind btree
transactions - io_complete_wq is used for btree updates after data and
metadata writes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we are checking whether a subvolume is empty in the specified snapshot,
entries that do not belong to this subvolume should be skipped.
This fixes the following case:
$ bcachefs subvolume create ./sub
$ cd sub
$ bcachefs subvolume create ./sub2
$ bcachefs subvolume snapshot . ./snap
$ ls -a snap
. ..
$ rmdir snap
rmdir: failed to remove 'snap': Directory not empty
As Kent suggested, we pass 0 in may_delete_deleted_inode() to ignore subvols
in the subvol we are checking, because inode.bi_subvol is only set on
subvolume roots, and we can't go through every inode in the subvolume and
change bi_subvol when taking a snapshot. It makes the check less strict, but
that's ok, the rest of fsck will still catch it.
Signed-off-by: Guoyu Ou <benogy@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were failing to set path->uptodate when reaching the end of a btree
node iterator, causing the new prefetch code for backpointers gc to go
into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
validate_bset_keys() never properly validated k->u64s; it checked if it
was 0, but not if it was smaller than keys for the given packed format;
this fixes that small oversight.
This patch was backported, so it's adding quite a few error enums so
that they don't get renumbered and we don't have confusing gaps.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't know where the superblock and journal lives on offline devices;
that means if a device is offline fsck can't check those buckets.
Previously, fsck would incorrectly clear bucket data types for those
buckets on offline devices; now we just use the previous state.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When a btree root is unreadable, we still might be able to get some data
back by replaying what's in the journal. Previously though, we got
confused when journal replay would attempt to replay a key for a level
that didn't exist.
This adds bch2_btree_increase_depth(), so that journal replay can handle
this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
check_inode_deleted_list() returns true if the inode is on the deleted
list; check_inode() was checking the return code incorrectly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds an option to disable kicking out devices when splitbrain is
detected - it seems there's some issues with splitbrain detection and
we're kicking out devices erronously.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We need to be able to iterate over extent ptrs that may be corrupted in
order to print them - this fixes a bug where we'd pop an assert in
bch2_bkey_durability_safe().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
order
bch2_journal_seq_blacklist_add() was bugged when the new entry
overlapped with multiple existing entries, and it also assumed new
entries are being added in increasing order.
This is true on any sane filesystem, but when trying to recover from
very badly mangled filesystems we might end up with the journal sequence
number rewinding vs. what the blacklist list knows about - easiest to
just handle that here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There is a null-ptr-deref issue reported by kasan:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Call Trace:
<TASK>
bch2_fs_alloc+0x1092/0x2170 [bcachefs]
bch2_fs_open+0x683/0xe10 [bcachefs]
...
When initializing the name of bch_fs, it needs to dynamically alloc memory
to meet the length of the name. However, when name allocation failed, it
will cause a null-ptr-deref access exception in subsequent string copy.
Fix this issue by checking if name allocation is successful.
Fixes: 401ec4db6308 ("bcachefs: Printbuf rework")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
Pull bcachefs fixes from Kent Overstreet:
"Some more mostly boring fixes, but some not
User reported ones:
- the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty
performance bug; user reported an untar initially taking two
seconds and then ~2 minutes
- kill a __GFP_NOFAIL in the buffered read path; this was a leftover
from the trickier fix to kill __GFP_NOFAIL in readahead, where we
can't return errors (and have to silently truncate the read
ourselves).
bcachefs can't use GFP_NOFAIL for folio state unlike iomap based
filesystems because our folio state is just barely too big, 2MB
hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL.
additionally, the flags argument was just buggy, we weren't
supplying GFP_KERNEL previously (!)"
* tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs:
bcachefs: fix bch2_save_backtrace()
bcachefs: Fix check_snapshot() memcpy
bcachefs: Fix bch2_journal_flush_device_pins()
bcachefs: fix iov_iter count underflow on sub-block dio read
bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree
bcachefs: Kill __GFP_NOFAIL in buffered read path
bcachefs: fix backpointer_to_text() when dev does not exist
|
|
Missed a call in the previous fix.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull two documentation build fixes from Jonathan Corbet:
- The XFS online fsck documentation uses incredibly deeply nested
subsection and list nesting; that broke the PDF docs build. Tweak a
parameter to tell LaTeX to allow the deeper nesting.
- Fix a 6.8 PDF-build regression
* tag 'docs-6.8-fixes3' of git://git.lwn.net/linux:
docs: translations: use attribute to store current language
docs: Instruct LaTeX to cope with deeper nesting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.8-rc6 to resolve some reported
problems. These include:
- regression fixes with typec tpcm code as reported by many
- cdnsp and cdns3 driver fixes
- usb role setting code bugfixes
- build fix for uhci driver
- ncm gadget driver bugfix
- MAINTAINERS entry update
All of these have been in linux-next all week with no reported issues
and there is at least one fix in here that is in Thorsten's regression
list that is being tracked"
* tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tpcm: Fix issues with power being removed during reset
MAINTAINERS: Drop myself as maintainer of TYPEC port controller drivers
usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role"
usb: gadget: omap_udc: fix USB gadget regression on Palm TE
usb: dwc3: gadget: Don't disconnect if not started
usb: cdns3: fix memory double free when handle zero packet
usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
usb: roles: don't get/set_role() when usb_role_switch is unregistered
usb: roles: fix NULL pointer issue when put module's reference
usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers
usb: cdnsp: blocked some cdns3 specific code
usb: uhci-grlib: Explicitly include linux/platform_device.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are three small serial/tty driver fixes for 6.8-rc6 that resolve
the following reported errors:
- riscv hvc console driver fix that was reported by many
- amba-pl011 serial driver fix for RS485 mode
- stm32 serial driver fix for RS485 mode
All of these have been in linux-next all week with no reported
problems"
* tag 'tty-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: amba-pl011: Fix DMA transmission in RS485 mode
serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
tty: hvc: Don't enable the RISC-V SBI console by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure clearing CPU buffers using VERW happens at the latest
possible point in the return-to-userspace path, otherwise memory
accesses after the VERW execution could cause data to land in CPU
buffers again
* tag 'x86_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM/VMX: Move VERW closer to VMentry for MDS mitigation
KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH
x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key
x86/entry_32: Add VERW just before userspace transition
x86/entry_64: Add VERW just before userspace transition
x86/bugs: Add asm helpers for executing VERW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Make sure GICv4 always gets initialized to prevent a kexec-ed kernel
from silently failing to set it up
- Do not call bus_get_dev_root() for the mbigen irqchip as it always
returns NULL - use NULL directly
- Fix hardware interrupt number truncation when assigning MSI
interrupts
- Correct sending end-of-interrupt messages to disabled interrupts
lines on RISC-V PLIC
* tag 'irq_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Do not assume vPE tables are preallocated
irqchip/mbigen: Don't use bus_get_dev_root() to find the parent
PCI/MSI: Prevent MSI hardware interrupt number truncation
irqchip/sifive-plic: Enable interrupt if needed before EOI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
- Fix page refcount leak when looking up specific inodes
introduced by metabuf reworking
* tag 'erofs-for-6.8-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix refcount on the metabuf used for inode lookup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull RCU pathwalk fixes from Al Viro:
"We still have some races in filesystem methods when exposed to RCU
pathwalk. This series is a result of code audit (the second round of
it) and it should deal with most of that stuff.
Still pending: ntfs3 ->d_hash()/->d_compare() and ceph_d_revalidate().
Up to maintainers (a note for NTFS folks - when documentation says
that a method may not block, it *does* imply that blocking allocations
are to be avoided. Really)"
[ More explanations for people who aren't familiar with the vagaries of
RCU path walking: most of it is hidden from filesystems, but if a
filesystem actively participates in the low-level path walking it
needs to make sure the fields involved in that walk are RCU-safe.
That "actively participate in low-level path walking" includes things
like having its own ->d_hash()/->d_compare() routines, or by having
its own directory permission function that doesn't just use the common
helpers. Having a ->d_revalidate() function will also have this issue.
Note that instead of making everything RCU safe you can also choose to
abort the RCU pathwalk if your operation cannot be done safely under
RCU, but that obviously comes with a performance penalty. One common
pattern is to allow the simple cases under RCU, and abort only if you
need to do something more complicated.
So not everything needs to be RCU-safe, and things like the inode etc
that the VFS itself maintains obviously already are. But these fixes
tend to be about properly RCU-delaying things like ->s_fs_info that
are maintained by the filesystem and that got potentially released too
early. - Linus ]
* tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ext4_get_link(): fix breakage in RCU mode
cifs_get_link(): bail out in unsafe case
fuse: fix UAF in rcu pathwalks
procfs: make freeing proc_fs_info rcu-delayed
procfs: move dropping pde and pid from ->evict_inode() to ->free_inode()
nfs: fix UAF on pathwalk running into umount
nfs: make nfs_set_verifier() safe for use in RCU pathwalk
afs: fix __afs_break_callback() / afs_drop_open_mmap() race
hfsplus: switch to rcu-delayed unloading of nls and freeing ->s_fs_info
exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper
affs: free affs_sb_info with kfree_rcu()
rcu pathwalk: prevent bogus hard errors from may_lookup()
fs/super.c: don't drop ->s_user_ns until we free struct super_block itself
|
|
Pull vfs fixes from Al Viro:
"A couple of fixes - revert of regression from this cycle and a fix for
erofs failure exit breakage (had been there since way back)"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
erofs: fix handling kern_mount() failure
Revert "get rid of DCACHE_GENOCIDE"
|
|
1) errors from ext4_getblk() should not be propagated to caller
unless we are really sure that we would've gotten the same error
in non-RCU pathwalk.
2) we leak buffer_heads if ext4_getblk() is successful, but bh is
not uptodate.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->d_revalidate() bails out there, anyway. It's not enough
to prevent getting into ->get_link() in RCU mode, but that
could happen only in a very contrieved setup. Not worth
trying to do anything fancy here unless ->d_revalidate()
stops kicking out of RCU mode at least in some cases.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.
Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
makes proc_pid_ns() safe from rcu pathwalk (put_pid_ns()
is still synchronous, but that's not a problem - it does
rcu-delay everything that needs to be)
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
that keeps both around until struct inode is freed, making access
to them safe from rcu-pathwalk
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
NFS ->d_revalidate(), ->permission() and ->get_link() need to access
some parts of nfs_server when called in RCU mode:
server->flags
server->caps
*(server->io_stats)
and, worst of all, call
server->nfs_client->rpc_ops->have_delegation
(the last one - as NFS_PROTO(inode)->have_delegation()). We really
don't want to RCU-delay the entire nfs_free_server() (it would have
to be done with schedule_work() from RCU callback, since it can't
be made to run from interrupt context), but actual freeing of
nfs_server and ->io_stats can be done via call_rcu() just fine.
nfs_client part is handled simply by making nfs_free_client() use
kfree_rcu().
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
nfs_set_verifier() relies upon dentry being pinned; if that's
the case, grabbing ->d_lock stabilizes ->d_parent and guarantees
that ->d_parent points to a positive dentry. For something
we'd run into in RCU mode that is *not* true - dentry might've
been through dentry_kill() just as we grabbed ->d_lock, with
its parent going through the same just as we get to into
nfs_set_verifier_locked(). It might get to detaching inode
(and zeroing ->d_inode) before nfs_set_verifier_locked() gets
to fetching that; we get an oops as the result.
That can happen in nfs{,4} ->d_revalidate(); the call chain in
question is nfs_set_verifier_locked() <- nfs_set_verifier() <-
nfs_lookup_revalidate_delegated() <- nfs{,4}_do_lookup_revalidate().
We have checked that the parent had been positive, but that's
done before we get to nfs_set_verifier() and it's possible for
memory pressure to pick our dentry as eviction candidate by that
time. If that happens, back-to-back attempts to kill dentry and
its parent are quite normal. Sure, in case of eviction we'll
fail the ->d_seq check in the caller, but we need to survive
until we return there...
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In __afs_break_callback() we might check ->cb_nr_mmap and if it's non-zero
do queue_work(&vnode->cb_work). In afs_drop_open_mmap() we decrement
->cb_nr_mmap and do flush_work(&vnode->cb_work) if it reaches zero.
The trouble is, there's nothing to prevent __afs_break_callback() from
seeing ->cb_nr_mmap before the decrement and do queue_work() after both
the decrement and flush_work(). If that happens, we might be in trouble -
vnode might get freed before the queued work runs.
__afs_break_callback() is always done under ->cb_lock, so let's make
sure that ->cb_nr_mmap can change from non-zero to zero while holding
->cb_lock (the spinlock component of it - it's a seqlock and we don't
need to mess with the counter).
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->d_hash() and ->d_compare() use those, so we need to delay freeing
them.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
That stuff can be accessed by ->d_hash()/->d_compare(); as it is, we have
a hard-to-hit UAF if rcu pathwalk manages to get into ->d_hash() on a filesystem
that is in process of getting shut down.
Besides, having nls and upcase table cleanup moved from ->put_super() towards
the place where sbi is freed makes for simpler failure exits.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
one of the flags in it is used by ->d_hash()/->d_compare()
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If lazy call of ->permission() returns a hard error, check that
try_to_unlazy() succeeds before returning it. That both makes
life easier for ->permission() instances and closes the race
in ENOTDIR handling - it is possible that positive d_can_lookup()
seen in link_path_walk() applies to the state *after* unlink() +
mkdir(), while nd->inode matches the state prior to that.
Normally seeing e.g. EACCES from permission check in rcu pathwalk
means that with some timings non-rcu pathwalk would've run into
the same; however, running into a non-executable regular file
in the middle of a pathname would not get to permission check -
it would fail with ENOTDIR instead.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Avoids fun races in RCU pathwalk... Same goes for freeing LSM shite
hanging off super_block's arse.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
check_snapshot() copies the bch_snapshot to a temporary to easily handle
older versions that don't have all the fields of the current version,
but it lacked a min() to correctly handle keys newer and larger than the
current version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a journal write errored, the list of devices it was written to could
be empty - we're not supposed to mark an empty replicas list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_direct_IO_read() checks the request offset and size for sector
alignment and then falls through to a couple calculations to shrink
the size of the request based on the inode size. The problem is that
these checks round up to the fs block size, which runs the risk of
underflowing iter->count if the block size happens to be large
enough. This is triggered by fstest generic/361 with a 4k block
size, which subsequently leads to a crash. To avoid this crash,
check that the shorten length doesn't exceed the overall length of
the iter.
Fixes:
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we're in FILTER_SNAPSHOTS mode and we start scanning a range of the
keyspace where no keys are visible in the current snapshot, we have a
problem - we'll scan for a very long time before scanning terminates.
Awhile back, this was fixed for most cases with peek_upto() (and
assertions that enforce that it's being used).
But the fix missed the fact that the inodes btree is different - every
key offset is in a different snapshot tree, not just the inode field.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Recently, we fixed our __GFP_NOFAIL usage in the readahead path, but the
easy one in read_single_folio() (where wa can return an error) was
missed - oops.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a crash when hot adding a PCI device to an LPAR since
recent changes
- Fix nested KVM level-2 guest reboot failure due to empty
'arch_compat'
Thanks to Amit Machhiwal, Aneesh Kumar K.V (IBM), Brian King, Gaurav
Batra, and Vaibhav Jain.
* tag 'powerpc-6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'
powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d fixes for nested domain handling:
- Cache invalidation for changes in a parent domain
- Dirty tracking setting for parent and nested domains
- Fix a constant-out-of-range warning
- ARM SMMU fixes:
- Fix CD allocation from atomic context when using SVA with SMMUv3
- Revert the conversion of SMMUv2 to domain_alloc_paging(), as it
breaks the boot for Qualcomm MSM8996 devices
- Restore SVA handle sharing in core code as it turned out there are
still drivers relying on it
* tag 'iommu-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/sva: Restore SVA handle sharing
iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock
iommu/vt-d: Fix constant-out-of-range warning
iommu/vt-d: Set SSADE when attaching to a parent with dirty tracking
iommu/vt-d: Add missing dirty tracking set for parent domain
iommu/vt-d: Wrap the dirty tracking loop to be a helper
iommu/vt-d: Remove domain parameter for intel_pasid_setup_dirty_tracking()
iommu/vt-d: Add missing device iotlb flush for parent domain
iommu/vt-d: Update iotlb in nested domain attach
iommu/vt-d: Add missing iotlb flush for parent domain
iommu/vt-d: Add __iommu_flush_iotlb_psi()
iommu/vt-d: Track nested domains in parent
Revert "iommu/arm-smmu: Convert to domain_alloc_paging()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of significant fixes for the CXL subsystem.
The largest change in this set, that bordered on "new development", is
the fix for the fact that the location of the new qos_class attribute
did not match the Documentation. The fix ends up deleting more code
than it added, and it has a new unit test to backstop basic errors in
this interface going forward. So the "red-diff" and unit test saved
the "rip it out and try again" response.
In contrast, the new notification path for firmware reported CXL
errors (CXL CPER notifications) has a locking context bug that can not
be fixed with a red-diff. Given where the release cycle stands, it is
not comfortable to squeeze in that fix in these waning days. So, that
receives the "back it out and try again later" treatment.
There is a regression fix in the code that establishes memory NUMA
nodes for platform CXL regions. That has an ack from x86 folks. There
are a couple more fixups for Linux to understand (reassemble) CXL
regions instantiated by platform firmware. The policy around platforms
that do not match host-physical-address with system-physical-address
(i.e. systems that have an address translation mechanism between the
address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
has been softened to abort driver load rather than teardown the memory
range (can cause system hangs). Lastly, there is a robustness /
regression fix for cases where the driver would previously continue in
the face of error, and a fixup for PCI error notification handling.
Summary:
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9"
* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Fix load failures due to single window creation failure
acpi/ghes: Remove CXL CPER notifications
cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
cxl/test: Add support for qos_class checking
cxl: Fix sysfs export of qos_class for memdev
cxl: Remove unnecessary type cast in cxl_qos_class_verify()
cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
cxl/region: Allow out of order assembly of autodiscovered regions
cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
x86/numa: Fix the sort compare func used in numa_fill_memblks()
x86/numa: Fix the address overlap check in numa_fill_memblks()
cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
|
