| Age | Commit message (Collapse) | Author |
|---|
|
The GRO path has a fast-path where we avoid calling pskb_may_pull
and pskb_expand by directly accessing frag0. However, this should
only be done if we have enough tailroom in the skb as otherwise
we'll have to expand it later anyway.
This patch adds the check by capping frag0_len with the skb tailroom.
Fixes: cb18978cbf45 ("gro: Open-code final pskb_may_pull")
Reported-by: Slava Shwartsman <slavash@mellanox.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit b45f0674b997 ("mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs"),
it changed EOPNOTSUPP to ENOTSUPP by mistake. This patch fixes it.
Fixes: b45f0674b997 ("mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With commit e53743994e21
("af_iucv: use paged SKBs for big outbound messages"),
we transmit paged skbs for both of AF_IUCV's transport modes
(IUCV or HiperSockets).
The qeth driver for Layer 3 HiperSockets currently doesn't
support NETIF_F_SG, so these skbs would just be linearized again
by the stack.
Avoid that overhead by using paged skbs only for IUCV transport.
cc stable, since this also circumvents a significant skb leak when
sending large messages (where the skb then needs to be linearized).
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # v4.8+
Fixes: e53743994e21 ("af_iucv: use paged SKBs for big outbound messages")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit bdabad3e363d ("net: Add Qualcomm IPC router") introduced a
new address family. Update the family name tables accordingly so
that the lockdep initialization can use the proper names for this
family.
Cc: Courtney Cavin <courtney.cavin@sonymobile.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Failure to mark this pointer as __le32 causes checkers like
sparse to complain:
net/qrtr/qrtr.c:274:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:274:16: expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:274:16: got restricted __le32 [usertype] <noident>
net/qrtr/qrtr.c:275:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:275:16: expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:275:16: got restricted __le32 [usertype] <noident>
net/qrtr/qrtr.c:276:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:276:16: expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:276:16: got restricted __le32 [usertype] <noident>
Silence it.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is perfectly possible to have non zero indexed switches being present
in a DSA switch tree, in such a case, we will be deferencing a NULL
pointer while dsa_cpu_port_ethtool_{setup,restore}. Be more defensive
and ensure that dst->ds[0] is valid before doing anything with it.
Fixes: 0c73c523cf73 ("net: dsa: Initialize CPU port ethtool ops per tree")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of fixes to use shell instead of bash to run
tests in embedded devices where the only shell available is the
busybox ash.
Also included is a typo fix to a test result message"
* tag 'linux-kselftest-4.10-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: x86/pkeys: fix spelling mistake: "itertation" -> "iteration"
selftests: do not require bash to run netsocktests testcase
selftests: do not require bash to run bpf tests
selftests: do not require bash for the generated test
|
|
If blk_mq_init_queue() returns an error, it gets assigned to
vblk->disk->queue. Then, when we call put_disk(), we end up calling
blk_put_queue() with the ERR_PTR, causing a bad dereference. Fix it by
only assigning to vblk->disk->queue on success.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Additionally, don't assign directly to disk->queue, otherwise
blk_put_queue (called via put_disk) will choke (panic) on the errno
stored there.
Bug found by code inspection after Omar found a similar issue in
virtio_blk. Compile-tested only.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Most users of BLOCK_PC requests allocate the sense buffer on the stack,
so to avoid DMA to the stack copy them to a field in the heap allocated
virtblk_req structure. Without that any attempt at SCSI passthrough I/O,
including the SG_IO ioctl from userspace will crash the kernel. Note that
this includes running tools like hdparm even when the host does not have
SCSI passthrough enabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The code currently uses sdio->blkbits to compute the number of blocks to
be cleaned. However sdio->blkbits is derived from the logical block size
of the underlying block device (Refer to the definition of
do_blockdev_direct_IO()). Due to this, generic/299 test would rarely
fail when executed on an ext4 filesystem with 64k as the block size and
when using a virtio based disk (having 512 byte as the logical block
size) inside a kvm guest.
This commit fixes the bug by using inode->i_blkbits to compute the
number of blocks to be cleaned.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixed up by Jeff Moyer to only use/evaluate inode->i_blkbits once,
to avoid issues with block size changes with IO in flight.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Removes following sparse complain :
net/core/flow_dissector.c:70:8: warning: symbol 'skb_flow_get_be16'
was not declared. Should it be static?
Fixes: 972d3876faa8 ("flow dissector: ICMP support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If srp_transfer_data fails within ibmvscsis_write_pending, then
the most likely scenario is that the client timed out the op and
removed the TCE mapping. Thus it will loop forever retrying the
op that is pretty much guaranteed to fail forever. A better return
code would be EIO instead of EAGAIN.
Cc: stable@vger.kernel.org
Reported-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Tested-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Signed-off-by: Bryant G. Ly <bgly@us.ibm.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
Hayes Wang says:
====================
r8152: fix autosuspend issue
Avoid rx is split into two parts when runtime suspend occurs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pause the rx and make sure the rx fifo is empty when the autosuspend
occurs.
If the rx data comes when the driver is canceling the rx urb, the host
controller would stop getting the data from the device and continue
it after next rx urb is submitted. That is, one continuing data is
split into two different urb buffers. That let the driver take the
data as a rx descriptor, and unexpected behavior happens.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Split rtl8152_suspend() into rtl8152_system_suspend() and
rtl8152_rumtime_suspend().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SPC4r37 6.4.1 EXTENDED COPY(LID4) states (also applying to LID1 reqs):
A parameter list length of zero specifies that the copy manager shall
not transfer any data or alter any internal state, and this shall not
be considered an error.
This behaviour can be tested using the libiscsi ExtendedCopy.ParamHdr
test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
Check for XCOPY header, CSCD descriptor and segment descriptor list
truncation, and respond accordingly.
SPC4r37 6.4.1 EXTENDED COPY(LID4) states (also applying to LID1 reqs):
If the parameter list length causes truncation of the parameter list,
then the copy manager shall transfer no data and shall terminate the
EXTENDED COPY command with CHECK CONDITION status, with the sense key
set to ILLEGAL REQUEST, and the additional sense code set to PARAMETER
LIST LENGTH ERROR.
This behaviour can be tested using the libiscsi ExtendedCopy.ParamHdr
test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
The XCOPY specification in SPC4r37 states that the XCOPY source and
destination device(s) should be derived from the copy source and copy
destination (CSCD) descriptor IDs in the XCOPY segment descriptor.
The CSCD IDs are generally (for block -> block copies), indexes into
the corresponding CSCD descriptor list, e.g.
=================================
EXTENDED COPY Header
=================================
CSCD Descriptor List
- entry 0
+ LU ID <--------------<------------------\
- entry 1 |
+ LU ID <______________<_____________ |
================================= | |
Segment Descriptor List | |
- segment 0 | |
+ src CSCD ID = 0 --------->---------+----/
+ dest CSCD ID = 1 ___________>______|
+ len
+ src lba
+ dest lba
=================================
Currently LIO completely ignores the src and dest CSCD IDs in the
Segment Descriptor List, and instead assumes that the first entry in the
CSCD list corresponds to the source, and the second to the destination.
This commit removes this assumption, by ensuring that the Segment
Descriptor List is parsed prior to processing the CSCD Descriptor List.
CSCD Descriptor List processing is modified to compare the current list
index with the previously obtained src and dest CSCD IDs.
Additionally, XCOPY requests where the src and dest CSCD IDs refer to
the CSCD Descriptor List entry can now be successfully processed.
Fixes: cbf031f ("target: Add support for EXTENDED_COPY copy offload")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191381
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
Ensure that the segment descriptor CSCD descriptor ID values correspond
to CSCD descriptor entries located in the XCOPY command parameter list.
SPC4r37 6.4.6.1 Table 150 specifies this range as 0000h to 07FFh, where
the CSCD descriptor location in the parameter list can be located via:
16 + (id * 32)
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[ bvanassche: inserted "; " in the format string of an error message
and also moved a "||" operator from the start of a line to the end
of the previous line ]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
target_xcopy_locate_se_dev_e4() is used to locate an se_dev, based on
the WWN provided with the XCOPY request. Remove a couple of unneeded
arguments, and rely on the caller for the src/dst test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
Use UNSUPPORTED TARGET DESCRIPTOR TYPE CODE and UNSUPPORTED SEGMENT
DESCRIPTOR TYPE CODE additional sense codes if a descriptor type in an
XCOPY request is not supported, as specified in spc4r37 6.4.5 and 6.4.6.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
spc4r37 6.4.3.5 states:
If the combined length of the CSCD descriptors and segment descriptors
exceeds the allowed value, then the copy manager shall terminate the
command with CHECK CONDITION status, with the sense key set to ILLEGAL
REQUEST, and the additional sense code set to PARAMETER LIST LENGTH
ERROR.
This functionality can be tested using the libiscsi
ExtendedCopy.DescrLimits test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
Check the length of the XCOPY request segment descriptor list against
the value advertised via the MAXIMUM SEGMENT DESCRIPTOR COUNT field in
the RECEIVE COPY OPERATING PARAMETERS response.
spc4r37 6.4.3.5 states:
If the number of segment descriptors exceeds the allowed number, the
copy manager shall terminate the command with CHECK CONDITION status,
with the sense key set to ILLEGAL REQUEST, and the additional sense
code set to TOO MANY SEGMENT DESCRIPTORS.
This functionality is testable using the libiscsi
ExtendedCopy.DescrLimits test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
spc4r37 6.4.3.4 states:
If the number of CSCD descriptors exceeds the allowed number, the copy
manager shall terminate the command with CHECK CONDITION status, with
the sense key set to ILLEGAL REQUEST, and the additional sense code
set to TOO MANY TARGET DESCRIPTORS.
LIO currently responds with INVALID FIELD IN PARAMETER LIST, which sees
it fail the libiscsi ExtendedCopy.DescrLimits test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
As defined in http://www.t10.org/lists/asc-num.htm. To be used during
validation of XCOPY target and segment descriptor lists.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
|
|
Make sockfs_setattr() static as it is not used outside of net/socket.c
This fixes the following GCC warning:
net/socket.c:534:5: warning: no previous prototype for ‘sockfs_setattr’ [-Wmissing-prototypes]
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.10
Only two fixes at this time. The rtlwifi fix is an important one as it
fixes a reported oops and Linus was already asking about it. The
orinoco fix is not tested on a real device, because it's old legacy
hardware and hardly no-one use it, but it should fix a (theoretical)
issue with VMAP_STACK.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'asoc/fix/tlv320aic3x' and 'asoc/fix/topology' into asoc-linus
|
|
'asoc/fix/dwc', 'asoc/fix/fsl-ssi' and 'asoc/fix/hdmi-codec' into asoc-linus
|
|
|
|
|
|
|
|
Plantronics BT600 does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x1" and "cannot get freq at
ep 0x82". This patch adds the USB ID of the BT600 to quirks.c and
avoids those error messages.
Signed-off-by: Dennis Kadioglu <denk@post.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This change was missed the tmpfs modification in In CVE-2016-7097
commit 073931017b49 ("posix_acl: Clear SGID bit when setting
file permissions")
It can test by xfstest generic/375, which failed to clear
setgid bit in the following test case on tmpfs:
touch $testfile
chown 100:100 $testfile
chmod 2755 $testfile
_runas -u 100 -g 101 -- setfacl -m u::rwx,g::rwx,o::rwx $testfile
Signed-off-by: Gu Zheng <guzheng1@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We do not yet have users of port_window. The following errors were found
when converting the tusb6010_omap.c musb driver:
- The peripheral side must have SRC_/DST_PACKED disabled
- when configuring the burst for the peripheral side the memory side
configuration were overwritten: d->csdp = ... -> d->csdp |= ...
- The EI and FI were configured for the wrong sides of the transfers.
With these changes and the converted tus6010_omap.c I was able to verify
that things are working as they expected to work.
Fixes: 201ac4861c19 ("dmaengine: omap-dma: Support for slave devices with data port window")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
allocations.
On a kernel with DEBUG_LOCKS, ioat_free_chan_resources triggers an
in_interrupt() warning. With PROVE_LOCKING, it reports detecting a
SOFTIRQ-safe to SOFTIRQ-unsafe lock ordering in the same code path.
This is because dma_generic_alloc_coherent() checks if the GFP flags
permit blocking. It allocates from different subsystems if blocking is
permitted. The free path knows how to return the memory to the correct
allocator. If GFP_KERNEL is specified then the alloc and free end up
going through cma_alloc(), which uses mutexes.
Given that ioat_free_chan_resources() can be called in interrupt
context, ioat_alloc_chan_resources() must specify GFP_NOWAIT so that the
allocations do not block and instead use an allocator that uses
spinlocks.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
This fixes a build error on certain architectures, such as ppc64.
Fixes: 6995f0b247e("md: takeover should clear unrelated bits")
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
There are only two reasons for xfs_log_force / xfs_log_force_lsn to fail:
one is an I/O error, for which xlog_bdstrat already logs a warning, and
the second is an already shutdown log due to a previous I/O errors. In
the latter case we'll already have a previous indication for the actual
error, but the large stream of misleading warnings from xfs_log_force
will probably scroll it out of the message buffer.
Simply removing the warnings thus makes the XFS log reporting significantly
better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
->total is a bit of an odd parameter passed down to the low-level
allocator all the way from the high-level callers. It's supposed to
contain the maximum number of blocks to be allocated for the whole
transaction [1].
But in xfs_iomap_write_allocate we only convert existing delayed
allocations and thus only have a minimal block reservation for the
current transaction, so xfs_alloc_space_available can't use it for
the allocation decisions. Use the maximum of args->total and the
calculated block requirement to make a decision. We probably should
get rid of args->total eventually and instead apply ->minleft more
broadly, but that will require some extensive changes all over.
[1] which creates lots of confusion as most callers don't decrement it
once doing a first allocation. But that's for a separate series.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We must decide in xfs_alloc_fix_freelist if we can perform an
allocation from a given AG is possible or not based on the available
space, and should not fail the allocation past that point on a
healthy file system.
But currently we have two additional places that second-guess
xfs_alloc_fix_freelist: xfs_alloc_ag_vextent tries to adjust the
maxlen parameter to remove the reservation before doing the
allocation (but ignores the various minium freespace requirements),
and xfs_alloc_fix_minleft tries to fix up the allocated length
after we've found an extent, but ignores the reservations and also
doesn't take the AGFL into account (and thus fails allocations
for not matching minlen in some cases).
Remove all these later fixups and just correct the maxlen argument
inside xfs_alloc_fix_freelist once we have the AGF buffer locked.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We can't just set minleft to 0 when we're low on space - that's exactly
what we need minleft for: to protect space in the AG for btree block
allocations when we are low on free space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Setting aside 4 blocks globally for bmbt splits isn't all that useful,
as different threads can allocate space in parallel. Bump it to 4
blocks per AG to allow each thread that is currently doing an
allocation to dip into it separately. Without that we may no have
enough reserved blocks if there are enough parallel transactions
in an almost out space file system that all run into bmap btree
splits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
After commit 1fb6f159fd21 ("tcp: add tcp_conn_request"),
tcp_peer_is_proven() no longer needs to be exported.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As I understand it the Meson GXL PHY driver is only useful on one
architecture so only make it visible on that architecture.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 7334b3e47aee ("net: phy: Add Meson GXL Internal PHY driver")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ipddp_route structs contain alignment padding so kernel heap memory
is leaked when they are copied to user space in
ipddp_ioctl(SIOCFINDIPDDPRT). Change kmalloc() to kzalloc() to clear
that memory.
Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
> cat /proc/sys/net/ipv4/tcp_notsent_lowat
-1
> echo 4294967295 > /proc/sys/net/ipv4/tcp_notsent_lowat
-bash: echo: write error: Invalid argument
> echo -2147483648 > /proc/sys/net/ipv4/tcp_notsent_lowat
> cat /proc/sys/net/ipv4/tcp_notsent_lowat
-2147483648
but in documentation we have "tcp_notsent_lowat - UNSIGNED INTEGER"
v2: simplify to just proc_douintvec
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
o s/approriate/appropriate
o s/discouvery/discovery
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"amdgpu, radeon, msm, meson, tilcdc, drm fixes.
Just back online for a couple of days, gathered up the remaining fixes
pull requests.
This contains fixes for a few ARM platforms (msm, tilcdc, meson), and
one core atomic fix. The AMD pull has some new hardware support
(Polaris12) in it, but this is pretty limited to just hw enablement
and shouldn't cause any problems"
* tag 'drm-fixes-for-v4.10-rc4' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: drop verde dpm quirks
drm/radeon: drop verde dpm quirks
drm/radeon: update smc firmware selection for SI
drm/amdgpu: update si kicker smc firmware
drm/amd/powerplay: extend smu's response timeout time.
drm/amdgpu: remove static integer for uvd pp state
drm/amd/amdgpu: add Polaris12 PCI ID
drm/amdgpu/powerplay: add Polaris12 support
drm/amd/amdgpu: add Polaris12 support (v3)
MAINTAINERS: Update mailing list for radeon and amdgpu
drm/meson: Fix CVBS VDAC disable
drm/meson: Fix CVBS initialization when HDMI is configured by bootloader
drm: Clean up planes in atomic commit helper failure path
drm: tilcdc: simplify the recovery from sync lost error on rev1
drm/meson: Fix plane atomic check when no crtc for the plane
drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set
drm/msm: Put back the vaddr in submit_reloc()
drm/msm: Ensure that the hardware write pointer is valid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- move freeing of GPIO hogs to after freeing the device to get rid of a
warning state.
- a small compile warning fix
* tag 'gpio-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Move freeing of GPIO hogs before numbing of the device
gpio: mxs: remove __init annotation
|
