summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-20io_uring: zero ref_node after killing itPavel Begunkov
After a rsrc/files reference node's refs are killed, it must never be used. And that's how it works, it either assigns a new node or kills the whole data table. Let's explicitly NULL it, that shouldn't be necessary, but if something would go wrong I'd rather catch a NULL dereference to using a dangling pointer. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-20io_uring: make the !CONFIG_NET helpers a bit more robustJens Axboe
With the prep and prep async split, we now have potentially 3 helpers that need to be defined for !CONFIG_NET. Add some helpers to do just that. Fixes the following compile error on !CONFIG_NET: fs/io_uring.c:6171:10: error: implicit declaration of function 'io_sendmsg_prep_async'; did you mean 'io_req_prep_async'? [-Werror=implicit-function-declaration] return io_sendmsg_prep_async(req); ^~~~~~~~~~~~~~~~~~~~~ io_req_prep_async Fixes: 93642ef88434 ("io_uring: split sqe-prep and async setup") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-20io_uring: don't hold uring_lock when calling io_run_task_work*Hao Xu
Abaci reported the below issue: [ 141.400455] hrtimer: interrupt took 205853 ns [ 189.869316] process 'usr/local/ilogtail/ilogtail_0.16.26' started with executable stack [ 250.188042] [ 250.188327] ============================================ [ 250.189015] WARNING: possible recursive locking detected [ 250.189732] 5.11.0-rc4 #1 Not tainted [ 250.190267] -------------------------------------------- [ 250.190917] a.out/7363 is trying to acquire lock: [ 250.191506] ffff888114dbcbe8 (&ctx->uring_lock){+.+.}-{3:3}, at: __io_req_task_submit+0x29/0xa0 [ 250.192599] [ 250.192599] but task is already holding lock: [ 250.193309] ffff888114dbfbe8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_register+0xad/0x210 [ 250.194426] [ 250.194426] other info that might help us debug this: [ 250.195238] Possible unsafe locking scenario: [ 250.195238] [ 250.196019] CPU0 [ 250.196411] ---- [ 250.196803] lock(&ctx->uring_lock); [ 250.197420] lock(&ctx->uring_lock); [ 250.197966] [ 250.197966] *** DEADLOCK *** [ 250.197966] [ 250.198837] May be due to missing lock nesting notation [ 250.198837] [ 250.199780] 1 lock held by a.out/7363: [ 250.200373] #0: ffff888114dbfbe8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_register+0xad/0x210 [ 250.201645] [ 250.201645] stack backtrace: [ 250.202298] CPU: 0 PID: 7363 Comm: a.out Not tainted 5.11.0-rc4 #1 [ 250.203144] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 250.203887] Call Trace: [ 250.204302] dump_stack+0xac/0xe3 [ 250.204804] __lock_acquire+0xab6/0x13a0 [ 250.205392] lock_acquire+0x2c3/0x390 [ 250.205928] ? __io_req_task_submit+0x29/0xa0 [ 250.206541] __mutex_lock+0xae/0x9f0 [ 250.207071] ? __io_req_task_submit+0x29/0xa0 [ 250.207745] ? 0xffffffffa0006083 [ 250.208248] ? __io_req_task_submit+0x29/0xa0 [ 250.208845] ? __io_req_task_submit+0x29/0xa0 [ 250.209452] ? __io_req_task_submit+0x5/0xa0 [ 250.210083] __io_req_task_submit+0x29/0xa0 [ 250.210687] io_async_task_func+0x23d/0x4c0 [ 250.211278] task_work_run+0x89/0xd0 [ 250.211884] io_run_task_work_sig+0x50/0xc0 [ 250.212464] io_sqe_files_unregister+0xb2/0x1f0 [ 250.213109] __io_uring_register+0x115a/0x1750 [ 250.213718] ? __x64_sys_io_uring_register+0xad/0x210 [ 250.214395] ? __fget_files+0x15a/0x260 [ 250.214956] __x64_sys_io_uring_register+0xbe/0x210 [ 250.215620] ? trace_hardirqs_on+0x46/0x110 [ 250.216205] do_syscall_64+0x2d/0x40 [ 250.216731] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 250.217455] RIP: 0033:0x7f0fa17e5239 [ 250.218034] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48 [ 250.220343] RSP: 002b:00007f0fa1eeac48 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab [ 250.221360] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0fa17e5239 [ 250.222272] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000008 [ 250.223185] RBP: 00007f0fa1eeae20 R08: 0000000000000000 R09: 0000000000000000 [ 250.224091] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 250.224999] R13: 0000000000021000 R14: 0000000000000000 R15: 00007f0fa1eeb700 This is caused by calling io_run_task_work_sig() to do work under uring_lock while the caller io_sqe_files_unregister() already held uring_lock. To fix this issue, briefly drop uring_lock when calling io_run_task_work_sig(), and there are two things to concern: - hold uring_lock in io_ring_ctx_free() around io_sqe_files_unregister() this is for consistency of lock/unlock. - add new fixed rsrc ref node before dropping uring_lock it's not safe to do io_uring_enter-->percpu_ref_get() with a dying one. - check if rsrc_data->refs is dying to avoid parallel io_sqe_files_unregister Reported-by: Abaci <abaci@linux.alibaba.com> Fixes: 1ffc54220c44 ("io_uring: fix io_sqe_files_unregister() hangs") Suggested-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> [axboe: fixes from Pavel folded in] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-20io_uring: fail io-wq submission from a task_workPavel Begunkov
In case of failure io_wq_submit_work() needs to post an CQE and so potentially take uring_lock. The safest way to deal with it is to do that from under task_work where we can safely take the lock. Also, as io_iopoll_check() holds the lock tight and releases it reluctantly, it will play nicer in the furuter with notifying an iopolling task about new such pending failed requests. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: "Here is what we have this merge window: 1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik. 2) Add RSS multi group support to octeontx2-pf driver, from Geetha Sowjanya. 3) Add support for KS8851 PHY. From Marek Vasut. 4) Add support for GarfieldPeak bluetooth controller from Kiran K. 5) Add support for half-duplex tcan4x5x can controllers. 6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw Liew. 7) Rework RX port offload infrastructure, particularly wrt, UDP tunneling, from Jakub Kicinski. 8) Add BCM72116 PHY support, from Florian Fainelli. 9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir Oltean. 10) Add support for picosecond rx delay in dwmac-meson8b chips. From Martin Blumenstingl. 11) Support TSO on xfrm interfaces from Eyal Birger. 12) Add support for MP_PRIO to mptcp stack, from Geliang Tang. 13) Support BCM4908 integrated switch, from Rafał Miłecki. 14) Support for directly accessing kernel module variables via module BTF info, from Andrii Naryiko. 15) Add DASH (esktop and mobile Architecture for System Hardware) support to r8169 driver, from Heiner Kallweit. 16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron. 17) Add support for 100 base0x SFP devices, from Bjarni Jonasson. 18) Support link aggregation in DSA, from Tobias Waldekranz. 19) Support for bitwidse atomics in bpf, from Brendan Jackman. 20) SmartEEE support in at803x driver, from Russell King. 21) Add support for flow based tunneling to GTP, from Pravin B Shelar. 22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder. 23) TLS RX offload for bonding, from Tariq Toukan. 24) RX decap offklload support in mac80211, from Felix Fietkou. 25) devlink health saupport in octeontx2-af, from George Cherian. 26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung 27) Delegated actionss support in mptcp, from Paolo Abeni. 28) Support receive timestamping when doin zerocopy tcp receive. From Arjun Ray. 29) HTB offload support for mlx5, from Maxim Mikityanskiy. 30) UDP GRO forwarding, from Maxim Mikityanskiy. 31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach. 32) Weighted random twos choice algorithm for ipvs, from Darby Payne. 33) Fix netdev registration deadlock, from Johannes Berg. 34) Various conversions to new tasklet api, from EmilRenner Berthing. 35) Bulk skb allocations in veth, from Lorenzo Bianconi. 36) New ethtool interface for lane setting, from Danielle Ratson. 37) Offload failiure notifications for routes, from Amit Cohen. 38) BCM4908 support, from Rafał Miłecki. 39) Support several new iwlwifi chips, from Ihab Zhaika. 40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski. 41) Support for mhi prrotocols, from Loic Poulain. 42) Optimize bpf program stats. 43) Implement RFC6056, for better port randomization, from Eric Dumazet. 44) hsr tag offloading support from George McCollister. 45) Netpoll support in qede, from Bhaskar Upadhaya. 46) 2005/400g speed support in bonding 3ad mode, from Nikolay Aleksandrov. 47) Netlink event support in mptcp, from Florian Westphal. 48) Better skbuff caching, from Alexander Lobakin. 49) MRP (Media Redundancy Protocol) offloading in DSA and a few drivers, from Horatiu Vultur. 50) mqprio saupport in mvneta, from Maxime Chevallier. 51) Remove of_phy_attach, no longer needed, from Florian Fainelli" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits) octeontx2-pf: Fix otx2_get_fecparam() cteontx2-pf: cn10k: Prevent harmless double shift bugs net: stmmac: Add PCI bus info to ethtool driver query output ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable. ptp: ptp_clockmatrix: Coding style - tighten vertical spacing. ptp: ptp_clockmatrix: Clean-up dev_*() messages. ptp: ptp_clockmatrix: Remove unused header declarations. ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable. ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock. net: stmmac: dwmac-sun8i: Add a shutdown callback net: stmmac: dwmac-sun8i: Minor probe function cleanup net: stmmac: dwmac-sun8i: Use reset_control_reset net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check net: stmmac: dwmac-sun8i: Return void from PHY unpower r8169: use macro pm_ptr net: mdio: Remove of_phy_attach() net: mscc: ocelot: select PACKING in the Kconfig net: re-solve some conflicts after net -> net-next merge net: dsa: tag_rtl4_a: Support also egress tags ...
2021-02-20fix handling of nd->depth on LOOKUP_CACHED failures in try_to_unlazy*Al Viro
After switching to non-RCU mode, we want nd->depth to match the number of entries in nd->stack[] that need eventual path_put(). legitimize_links() takes care of that on failures; unfortunately, failure exits added for LOOKUP_CACHED do not. We could add the logics for that into those failure exits, both in try_to_unlazy() and in try_to_unlazy_next(), but since both checks are immediately followed by legitimize_links() and there's no calls of legitimize_links() other than those two... It's easier to move the check (and required handling of nd->depth on failure) into legitimize_links() itself. [caught by Jens: ... and since we are zeroing ->depth here, we need to do drop_links() first] Fixes: 6c6ec2b0a3e0 "fs: add support for LOOKUP_CACHED" Tested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-02-20swiotlb: clean up swiotlb_tbl_unmap_singleChristoph Hellwig
Remove a layer of pointless indentation, replace a hard to follow ternary expression with a plain if/else. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jianxiong Gao <jxgao@google.com> Tested-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-02-20swiotlb: factor out a nr_slots helperChristoph Hellwig
Factor out a helper to find the number of slots for a given size. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jianxiong Gao <jxgao@google.com> Tested-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-02-20swiotlb: factor out an io_tlb_offset helperChristoph Hellwig
Replace the very genericly named OFFSET macro with a little inline helper that hardcodes the alignment to the only value ever passed. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jianxiong Gao <jxgao@google.com> Tested-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-02-20swiotlb: add a IO_TLB_SIZE defineChristoph Hellwig
Add a new IO_TLB_SIZE define instead open coding it using IO_TLB_SHIFT all over. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jianxiong Gao <jxgao@google.com> Tested-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-02-20driver core: add a min_align_mask field to struct device_dma_parametersJianxiong Gao
Some devices rely on the address offset in a page to function correctly (NVMe driver as an example). These devices may use a different page size than the Linux kernel. The address offset has to be preserved upon mapping, and in order to do so, we need to record the page_offset_mask first. Signed-off-by: Jianxiong Gao <jxgao@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-02-20sdhci: stop poking into swiotlb internalsChristoph Hellwig
Use the proper API to query the max mapping size instead of guessing it based on swiotlb internals. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-02-20drm/i915/vbt: update DP max link rate tableLee Shawn C
According to Bspec #20124, max link rate table for DP was updated at BDB version 230. Max link rate can support upto UHBR. After migrate to BDB v230, the definition for LBR, HBR2 and HBR3 were changed. For backward compatibility. If BDB version was from 216 to 229. Driver have to follow original rule to configure DP max link rate value from VBT. v2: split the mapping table to two for old and new BDB definition. v3: return link rate instead of assigning it. v4: remove the useless variable. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: William Tseng <william.tseng@intel.com> Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com> [vsyrjala: Try to retain the comment that VBT version 216 added some of this] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210218052333.16109-1-shawn.c.lee@intel.com
2021-02-19cifs: Fix inconsistent IS_ERR and PTR_ERRYueHaibing
Fix inconsistent IS_ERR and PTR_ERR in cifs_find_swn_reg(). The proper pointer to be passed as argument to PTR_ERR() is share_name. This bug was detected with the help of Coccinelle. Fixes: bf80e5d4259a ("cifs: Send witness register and unregister commands to userspace daemon") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Samuel Cabrero <scabrero@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-02-19leds: lp50xx: Get rid of redundant explicit castingAndy Shevchenko
In the line like u32 bar = ...; u8 foo = (u8)(bar >> 8) & 0xff; is no need to have neither explicit casting nor ' & 0xff' part. Get rid of them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19leds: lp50xx: Update headers block to reflect realityAndy Shevchenko
The OF is not used in the driver, thus the OF headers are not needed, but mod_devicetable.h is missed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19leds: lp50xx: Get rid of redundant check in lp50xx_enable_disable()Andy Shevchenko
Since GPIO is optional the API is NULL aware and will check descriptor anyway. Remove duplicate redundant check in lp50xx_enable_disable(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19leds: lp50xx: Reduce level of dereferencesAndy Shevchenko
The priv->dev is effectively the same as &priv->client->dev. So, drop the latter for the former. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19leds: lp50xx: Switch to new style i2c-driver probe functionAndy Shevchenko
Switch to the new style i2c-driver probe_new probe function. Note we do not have any old style board files using this but user still has a possibility to instantiate device from sysfs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19leds: lp50xx: Don't spam logs when probe is deferredAndy Shevchenko
When requesting GPIO line the probe can be deferred. In such case don't spam logs with an error message. This can be achieved by switching to dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19leds: apu: extend support for PC Engines APU1 with newer firmwareAndreas Eberlein
The DMI_PRODUCT_NAME entry on current firmware of PC Engines APU1 changed from "APU" to "apu1" This modification adds the missing DMI data and thereby the LED support for the PC Engines APU1 with firmware versions >= 4.6.8. Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de> Tested-by: Zbyněk Kocur <zbynek.kocur@fel.cvut.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19kprobes: Fix to delay the kprobes jump optimizationMasami Hiramatsu
Commit 36dadef23fcc ("kprobes: Init kprobes in early_initcall") moved the kprobe setup in early_initcall(), which includes kprobe jump optimization. The kprobes jump optimizer involves synchronize_rcu_tasks() which depends on the ksoftirqd and rcu_spawn_tasks_*(). However, since those are setup in core_initcall(), kprobes jump optimizer can not run at the early_initcall(). To avoid this issue, make the kprobe optimization disabled in the early_initcall() and enables it in subsys_initcall(). Note that non-optimized kprobes is still available after early_initcall(). Only jump optimization is delayed. Link: https://lkml.kernel.org/r/161365856280.719838.12423085451287256713.stgit@devnote2 Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall") Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: RCU <rcu@vger.kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Axtens <dja@axtens.net> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Y . Ts'o" <tytso@mit.edu> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: stable@vger.kernel.org Reported-by: Paul E. McKenney <paulmck@kernel.org> Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reported-by: Uladzislau Rezki <urezki@gmail.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-19Input: applespi - fix occasional crc errors under load.Ronald Tschalär
For some reason, when the system is under heavy CPU load, the read following the write sometimes occurs unusually quickly, resulting in the read data not being quite ready and hence a bad packet getting read. Adding another delay after reading the status message appears to fix this. Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Link: https://lore.kernel.org/r/20210217190718.11035-2-ronald@innovation.ch Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-19Input: applespi - don't wait for responses to commands indefinitely.Ronald Tschalär
The response to a command may never arrive or it may be corrupted (and hence dropped) for some reason. While exceedingly rare, when it did happen it blocked all further commands. One way to fix this was to do a suspend/resume. However, recovering automatically seems like a nicer option. Hence this puts a time limit (1 sec) on how long we're willing to wait for a response, after which we assume it got lost. Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Link: https://lore.kernel.org/r/20210217190718.11035-1-ronald@innovation.ch Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-19Input: st1232 - add IDLE state as ready conditionMichael Tretter
The st1232 can switch from NORMAL to IDLE state after the configured idle time (by default 8 s). If the st1232 is not reset during probe, it might already be ready but in IDLE state. Since it does not enter NORMAL state in this case, probe fails. Fix the wait function to report the IDLE state as ready, too. Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20210219110556.1858969-1-m.tretter@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-19Input: zinitix - fix return type of zinitix_init_touch()Dmitry Torokhov
zinitix_init_touch() returns error code or 0 for success and therefore return type must be int, not bool. Fixes: 26822652c85e ("Input: add zinitix touchscreen driver") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/YC8z2bXc3Oy8pABa@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-19Input: i8042 - add ASUS Zenbook Flip to noselftest listMarcos Paulo de Souza
After commit 77b425399f6d ("Input: i8042 - use chassis info to skip selftest on Asus laptops"), all modern Asus laptops have the i8042 selftest disabled. It has done by using chassys type "10" (laptop). The Asus Zenbook Flip suffers from similar suspend/resume issues, but it _sometimes_ work and sometimes it doesn't. Setting noselftest makes it work reliably. In this case, we need to add chassis type "31" (convertible) in order to avoid selftest in this device. Reported-by: Ludvig Norgren Guldhag <ludvigng@gmail.com> Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Link: https://lore.kernel.org/r/20210219164638.761-1-mpdesouza@suse.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-19Input: add missing dependencies on CONFIG_HAS_IOMEMDmitry Torokhov
devm_ioremap_resource() is only guaranteed to be present if CONFIG_HAS_IOMEM is set. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/YCyauGyqxut69JNz@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-19Input: joydev - prevent potential read overflow in ioctlDan Carpenter
The problem here is that "len" might be less than "joydev->nabs" so the loops which verfy abspam[i] and keypam[] might read beyond the buffer. Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YCyzR8WvFRw4HWw6@mwanda [dtor: additional check for len being even in joydev_handle_JSIOCSBTNMAP] Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-19i40e: Fix endianness conversionsNorbert Ciosek
Fixes the following sparse warnings: i40e_main.c:5953:32: warning: cast from restricted __le16 i40e_main.c:8008:29: warning: incorrect type in assignment (different base types) i40e_main.c:8008:29: expected unsigned int [assigned] [usertype] ipa i40e_main.c:8008:29: got restricted __le32 [usertype] i40e_main.c:8008:29: warning: incorrect type in assignment (different base types) i40e_main.c:8008:29: expected unsigned int [assigned] [usertype] ipa i40e_main.c:8008:29: got restricted __le32 [usertype] i40e_txrx.c:1950:59: warning: incorrect type in initializer (different base types) i40e_txrx.c:1950:59: expected unsigned short [usertype] vlan_tag i40e_txrx.c:1950:59: got restricted __le16 [usertype] l2tag1 i40e_txrx.c:1953:40: warning: cast to restricted __le16 i40e_xsk.c:448:38: warning: invalid assignment: |= i40e_xsk.c:448:38: left side has type restricted __le64 i40e_xsk.c:448:38: right side has type int Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Fixes: 2a508c64ad27 ("i40e: fix VLAN.TCI == 0 RX HW offload") Fixes: 3106c580fb7c ("i40e: Use batched xsk Tx interfaces to increase performance") Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support") Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-19i40e: Fix add TC filter for IPv6Mateusz Palczewski
Fix insufficient distinction between IPv4 and IPv6 addresses when creating a filter. IPv4 and IPv6 are kept in the same memory area. If IPv6 is added, then it's caught by IPv4 check, which leads to err -95. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-19arm64 module: set plt* section addresses to 0x0Shaoying Xu
These plt* and .text.ftrace_trampoline sections specified for arm64 have non-zero addressses. Non-zero section addresses in a relocatable ELF would confuse GDB when it tries to compute the section offsets and it ends up printing wrong symbol addresses. Therefore, set them to zero, which mirrors the change in commit 5d8591bc0fba ("module: set ksymtab/kcrctab* section addresses to 0x0"). Reported-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Shaoying Xu <shaoyi@amazon.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210216183234.GA23876@amazon.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-19arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() failsqiuguorui1
in function create_dtb(), if fdt_open_into() fails, we need to vfree buf before return. Fixes: 52b2a8af7436 ("arm64: kexec_file: load initrd and device-tree") Cc: stable@vger.kernel.org # v5.0 Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com> Link: https://lore.kernel.org/r/20210218125900.6810-1-qiuguorui1@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-19arm64: spectre: Prevent lockdep splat on v4 mitigation enable pathWill Deacon
The Spectre-v4 workaround is re-configured when resuming from suspend, as the firmware may have re-enabled the mitigation despite the user previously asking for it to be disabled. Enabling or disabling the workaround can result in an undefined instruction exception on CPUs which implement PSTATE.SSBS but only allow it to be configured by adjusting the SPSR on exception return. We handle this by installing an 'undef hook' which effectively emulates the access. Installing this hook requires us to take a couple of spinlocks both to avoid corrupting the internal list of hooks but also to ensure that we don't run into an unhandled exception. Unfortunately, when resuming from suspend, we haven't yet called rcu_idle_exit() and so lockdep gets angry about "suspicious RCU usage". In doing so, it tries to print a warning, which leads it to get even more suspicious, this time about itself: | rcu_scheduler_active = 2, debug_locks = 1 | RCU used illegally from extended quiescent state! | 1 lock held by swapper/0: | #0: (logbuf_lock){-.-.}-{2:2}, at: vprintk_emit+0x88/0x198 | | Call trace: | dump_backtrace+0x0/0x1d8 | show_stack+0x18/0x24 | dump_stack+0xe0/0x17c | lockdep_rcu_suspicious+0x11c/0x134 | trace_lock_release+0xa0/0x160 | lock_release+0x3c/0x290 | _raw_spin_unlock+0x44/0x80 | vprintk_emit+0xbc/0x198 | vprintk_default+0x44/0x6c | vprintk_func+0x1f4/0x1fc | printk+0x54/0x7c | lockdep_rcu_suspicious+0x30/0x134 | trace_lock_acquire+0xa0/0x188 | lock_acquire+0x50/0x2fc | _raw_spin_lock+0x68/0x80 | spectre_v4_enable_mitigation+0xa8/0x30c | __cpu_suspend_exit+0xd4/0x1a8 | cpu_suspend+0xa0/0x104 | psci_cpu_suspend_enter+0x3c/0x5c | psci_enter_idle_state+0x44/0x74 | cpuidle_enter_state+0x148/0x2f8 | cpuidle_enter+0x38/0x50 | do_idle+0x1f0/0x2b4 Prevent these splats by running __cpu_suspend_exit() with RCU watching. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Saravana Kannan <saravanak@google.com> Suggested-by: "Paul E . McKenney" <paulmck@kernel.org> Reported-by: Sami Tolvanen <samitolvanen@google.com> Fixes: c28762070ca6 ("arm64: Rewrite Spectre-v4 mitigation code") Cc: <stable@vger.kernel.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210218140346.5224-1-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-02-19vfio/pci: remove CONFIG_VFIO_PCI_ZDEV from KconfigMax Gurtovoy
In case we're running on s390 system always expose the capabilities for configuration of zPCI devices. In case we're running on different platform, continue as usual. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-02-19cxl/mem: Return -EFAULT if copy_to_user() failsDan Carpenter
The copy_to_user() function returns the number of bytes remaining to be copied, but we want to return -EFAULT if the copy doesn't complete. Fixes: b754ffbbc0ee ("cxl/mem: Add basic IOCTL interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YC+K3kgzqm20zCWY@mwanda Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-19cpufreq: Fix typo in kerneldoc commentYue Hu
Change 'Terget' to 'Target'. Should be Target. Signed-off-by: Yue Hu <huyue2@yulong.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-19cpufreq: schedutil: Remove update_lock comment from struct sugov_policy ↵Yue Hu
definition Currently, update_lock is also used in sugov_update_single_freq(). The comment is not helpful anymore. Signed-off-by: Yue Hu <huyue2@yulong.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-19cpufreq: schedutil: Remove needless sg_policy parameter from ↵Yue Hu
ignore_dl_rate_limit() Since sg_policy is a member of struct sugov_cpu. Also remove the local variable in sugov_update_single_common() to make the code more clean. Signed-off-by: Yue Hu <huyue2@yulong.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Minor subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-19ACPICA: Remove some code duplication from acpi_ev_address_space_dispatchHans de Goede
ACPICA commit 383f50ff8cb7424ca16a6c0234f103b41d4a783e The handling of the space_id == ACPI_ADR_SPACE_GSBUS and space_id == ACPI_ADR_SPACE_GPIO cases is almost identical, fold the 2 cases into 1 to remove some code duplication. Link: https://github.com/acpica/acpica/commit/383f50ff Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-19ACPICA: Fix race in generic_serial_bus (I2C) and GPIO op_region parameter ↵Hans de Goede
handling ACPICA commit c9e0116952363b0fa815143dca7e9a2eb4fefa61 The handling of the generic_serial_bus (I2C) and GPIO op_regions in acpi_ev_address_space_dispatch() passes a number of extra parameters to the address-space handler through the address-space Context pointer (instead of using more function parameters). The Context is shared between threads, so if multiple threads try to call the handler for the same address-space at the same time, then a second thread could change the parameters of a first thread while the handler is running for the first thread. An example of this race hitting is the Lenovo Yoga Tablet2 1015L, where there are both attrib_bytes accesses and attrib_byte accesses to the same address-space. The attrib_bytes access stores the number of bytes to transfer in Context->access_length. Where as for the attrib_byte access the number of bytes to transfer is always 1 and field_obj->Field.access_length is unused (so 0). Both types of accesses racing from different threads leads to the following problem: 1. Thread a. starts an attrib_bytes access, stores a non 0 value from field_obj->Field.access_length in Context->access_length 2. Thread b. starts an attrib_byte access, stores 0 in Context->access_length 3. Thread a. calls i2c_acpi_space_handler() (under Linux). Which sees that the access-type is ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE and calls acpi_gsb_i2c_read_bytes(..., Context->access_length) 4. At this point Context->access_length is 0 (set by thread b.) rather then the field_obj->Field.access_length value from thread a. This 0 length reads leads to the following errors being logged: i2c i2c-0: adapter quirk: no zero length (addr 0x0078, size 0, read) i2c i2c-0: i2c read 0 bytes from client@0x78 starting at reg 0x0 failed, error: -95 Note this is just an example of the problems which this race can cause. There are likely many more (sporadic) problems caused by this race. This commit adds a new context_mutex to struct acpi_object_addr_handler and makes acpi_ev_address_space_dispatch() take that mutex when using the shared Context to pass extra parameters to an address-space handler, fixing this race. Note the new mutex must be taken *after* exiting the interpreter, therefor the existing acpi_ex_exit_interpreter() call is moved to above the code which stores the extra parameters in the Context. Link: https://github.com/acpica/acpica/commit/c9e01169 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-19leds: flash: Fix multicolor no-ops registration by return 0Gene Chen
Fix multicolor no-ops registration by return 0, and move the same registration functions outside of #ifdef block. Signed-off-by: Gene Chen <gene_chen@richtek.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19leds: flash: Add flash registration with undefined CONFIG_LEDS_CLASS_FLASHGene Chen
Add flash registration with undefined CONFIG_LEDS_CLASS_FLASH, and move the same registration functions outside of #ifdef block. Signed-off-by: Gene Chen <gene_chen@richtek.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19leds: lgm: Add LED controller driver for LGM SoCAmireddy Mallikarjuna reddy
Parallel to serial conversion, which is also called SSO controller, can drive external shift register for LED outputs, reset or general purpose outputs. This driver enables LED support for Serial Shift Output Controller (SSO). Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19dt-bindings: leds: Add bindings for Intel LGM SoCAmireddy Mallikarjuna reddy
Add DT bindings YAML schema for SSO controller driver of Lightning Mountain (LGM) SoC. Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Rob Herring <robh@kernel.org>
2021-02-19leds: led-core: Get rid of enum led_brightnessAbanoub Sameh
This gets rid of enum led_brightness in the main led files, because it is deprecated, and an unsigned int can be used instead. We can get rid of led_brightness completely and patches can also be supplied for the other drivers' files. Signed-off-by: Abanoub Sameh <abanoubsameh@protonmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19KVM: x86/mmu: Remove a variety of unnecessary exportsSean Christopherson
Remove several exports from the MMU that are no longer necessary. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-15-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86: Fold "write-protect large" use case into generic write-protectSean Christopherson
Drop kvm_mmu_slot_largepage_remove_write_access() and refactor its sole caller to use kvm_mmu_slot_remove_write_access(). Remove the now-unused slot_handle_large_level() and slot_handle_all_level() helpers. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-14-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: x86/mmu: Don't set dirty bits when disabling dirty logging w/ PMLSean Christopherson
Stop setting dirty bits for MMU pages when dirty logging is disabled for a memslot, as PML is now completely disabled when there are no memslots with dirty logging enabled. This means that spurious PML entries will be created for memslots with dirty logging disabled if at least one other memslot has dirty logging enabled. However, spurious PML entries are already possible since dirty bits are set only when a dirty logging is turned off, i.e. memslots that are never dirty logged will have dirty bits cleared. In the end, it's faster overall to eat a few spurious PML entries in the window where dirty logging is being disabled across all memslots. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-13-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-19KVM: VMX: Dynamically enable/disable PML based on memslot dirty loggingMakarand Sonare
Currently, if enable_pml=1 PML remains enabled for the entire lifetime of the VM irrespective of whether dirty logging is enable or disabled. When dirty logging is disabled, all the pages of the VM are manually marked dirty, so that PML is effectively non-operational. Setting the dirty bits is an expensive operation which can cause severe MMU lock contention in a performance sensitive path when dirty logging is disabled after a failed or canceled live migration. Manually setting dirty bits also fails to prevent PML activity if some code path clears dirty bits, which can incur unnecessary VM-Exits. In order to avoid this extra overhead, dynamically enable/disable PML when dirty logging gets turned on/off for the first/last memslot. Signed-off-by: Makarand Sonare <makarandsonare@google.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210213005015.1651772-12-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 21:42:09 +0000