| Age | Commit message (Collapse) | Author |
|---|
|
This change introduces a mechanism for notifying userspace
applications about changes to IPv6 anycast addresses via netlink. It
includes:
* Addition and deletion of IPv6 anycast addresses are reported using
RTM_NEWANYCAST and RTM_DELANYCAST.
* A new netlink group (RTNLGRP_IPV6_ACADDR) for subscribing to these
notifications.
This enables user space applications(e.g. ip monitor) to efficiently
track anycast addresses through netlink messages, improving metrics
collection and system monitoring. It also unlocks the potential for
advanced anycast management in user space, such as hardware offload
control and fine grained network control.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250107114355.1766086-1-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The overflow_work is using system wq to do overflow checks and updates
for PHC device timecounter, which might be overhelmed by other tasks.
But there is dedicated kthread in PTP subsystem designed for such
things. This patch changes the work queue to proper align with PTP
subsystem and to avoid overloading system work queue.
The adjfine() function acts the same way as overflow check worker,
we can postpone ptp aux worker till the next overflow period after
adjfine() was called.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250107104812.380225-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
stmmac_rx_offset() is referenced in stmmac_main.c only,
let's move it to stmmac_main.c.
Drop the inline keyword by the way, it is better to let the compiler
to decide.
Compile tested only.
No functional change intended.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250107075448.4039925-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for RTL8125BP rev.b. Its XID is 0x689. This chip supports
DASH and its dash type is "RTL_DASH_25_BP".
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250107064355.104711-1-hau@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We found a timeout problem with the pldm command on our system. The
reason is that the MCTP-I3C driver has a race condition when receiving
multiple-packet messages in multi-thread, resulting in a wrong packet
order problem.
We identified this problem by adding a debug message to the
mctp_i3c_read function.
According to the MCTP spec, a multiple-packet message must be composed
in sequence, and if there is a wrong sequence, the whole message will be
discarded and wait for the next SOM.
For example, SOM → Pkt Seq #2 → Pkt Seq #1 → Pkt Seq #3 → EOM.
Therefore, we try to solve this problem by adding a mutex to the
mctp_i3c_read function. Before the modification, when a command
requesting a multiple-packet message response is sent consecutively, an
error usually occurs within 100 loops. After the mutex, it can go
through 40000 loops without any error, and it seems to run well.
Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver")
Signed-off-by: Leo Yang <Leo-Yang@quantatw.com>
Link: https://patch.msgid.link/20250107031529.3296094-1-Leo-Yang@quantatw.com
[pabeni@redhat.com: dropped already answered question from changelog]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Most of our tests use rtnetlink to read device stats, so they
don't expose the drivers much to paths in which device stats
are read under RCU. Add tests which hammer profcs reads to
make sure drivers:
- don't sleep while reporting stats,
- can handle parallel reads,
- can handle device going down while reading.
Set ifname on the env class in NetDrvEnv, we already do that
in NetDrvEpEnv.
KTAP version 1
1..7
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
ok 6 stats.procfs_hammer
# completed up/down cycles: 6
ok 7 stats.procfs_downup_hammer
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250107022932.2087744-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The documentation contained an unusual character due to an issue in my
personal b4 setup. Fix the problem by providing the correct PSE Pinout
Alternatives table number description.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250107142659.425877-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-01-07 (ice, igc)
For ice:
Arkadiusz corrects mask value being used to determine DPLL phase range.
Przemyslaw corrects frequency value for E823 devices.
For igc:
En-Wei Wu adds a check and, early, return for failed register read.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: return early when failing to read EECD register
ice: fix incorrect PHY settings for 100 GB/s
ice: fix max values for dpll pin phase adjust
====================
Link: https://patch.msgid.link/20250107190150.1758577-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btmtk: Fix failed to send func ctrl for MediaTek devices.
- hci_sync: Fix not setting Random Address when required
- MGMT: Fix Add Device to responding before completing
- btnxpuart: Fix driver sending truncated data
* tag 'for-net-2025-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: Fix failed to send func ctrl for MediaTek devices.
Bluetooth: btnxpuart: Fix driver sending truncated data
Bluetooth: MGMT: Fix Add Device to responding before completing
Bluetooth: hci_sync: Fix not setting Random Address when required
====================
Link: https://patch.msgid.link/20250108162627.1623760-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four driver fixes in UFS, mostly to do with power management"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Power down the controller/device during system suspend for SM8550/SM8650 SoCs
scsi: ufs: qcom: Allow passing platform specific OF data
scsi: ufs: core: Honor runtime/system PM levels if set by host controller drivers
scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
There's a series of bugfix that's been accepted:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=d80a3091308491455b6501b1c4b68698c4a7cd24
However, The series is making the driver poke into IOMMU internals instead of
implementing appropriate IOMMU workarounds. After discussion, the series was reverted:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=249cfa318fb1b77eb726c2ff4f74c9685f04e568
But only two patches are related to the IOMMU.
Other patches involve only the modification of the driver.
This series resends other patches.
v2*: https://lore.kernel.org/20241217010839.1742227-1-shaojijie@huawei.com
v2: https://lore.kernel.org/20241216132346.1197079-1-shaojijie@huawei.com
v1: https://lore.kernel.org/20241107133023.3813095-1-shaojijie@huawei.com
====================
Link: https://patch.msgid.link/20250106143642.539698-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.
[ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge]
[ 128.292938] sp : ffff800059b93140
[ 128.297200] x29: ffff800059b93140 x28: 0000000000003280
[ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080
[ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001
[ 128.315969] x23: 0000000000000000 x22: 0000000000000194
[ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000
[ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000
[ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24
[ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000
[ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368
[ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02
[ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0
[ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000
[ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff
[ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294
[ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080
[ 128.390626] Call trace:
[ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3]
[ 128.405468] xmit_one.constprop.0+0xc4/0x200
[ 128.410600] dev_hard_start_xmit+0x54/0xf0
[ 128.415556] sch_direct_xmit+0xe8/0x634
[ 128.420246] __dev_queue_xmit+0x224/0xc70
[ 128.425101] dev_queue_xmit+0x1c/0x40
[ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch]
[ 128.435409] do_output+0x60/0x17c [openvswitch]
[ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch]
[ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch]
[ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch]
[ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch]
[ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch]
[ 128.471460] xmit_one.constprop.0+0xc4/0x200
[ 128.476561] dev_hard_start_xmit+0x54/0xf0
[ 128.481489] __dev_queue_xmit+0x968/0xc70
[ 128.486330] dev_queue_xmit+0x1c/0x40
[ 128.490856] ip_finish_output2+0x250/0x570
[ 128.495810] __ip_finish_output+0x170/0x1e0
[ 128.500832] ip_finish_output+0x3c/0xf0
[ 128.505504] ip_output+0xbc/0x160
[ 128.509654] ip_send_skb+0x58/0xd4
[ 128.513892] udp_send_skb+0x12c/0x354
[ 128.518387] udp_sendmsg+0x7a8/0x9c0
[ 128.522793] inet_sendmsg+0x4c/0x8c
[ 128.527116] __sock_sendmsg+0x48/0x80
[ 128.531609] __sys_sendto+0x124/0x164
[ 128.536099] __arm64_sys_sendto+0x30/0x5c
[ 128.540935] invoke_syscall+0x50/0x130
[ 128.545508] el0_svc_common.constprop.0+0x10c/0x124
[ 128.551205] do_el0_svc+0x34/0xdc
[ 128.555347] el0_svc+0x20/0x30
[ 128.559227] el0_sync_handler+0xb8/0xc0
[ 128.563883] el0_sync+0x160/0x180
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-8-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:
[ 16.324639] Call trace:
[ 16.324641] __queue_delayed_work+0xb8/0xe0
[ 16.324643] mod_delayed_work_on+0x78/0xd0
[ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge]
[ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge]
[ 16.324666] __handle_irq_event_percpu+0x64/0x1e0
[ 16.324667] handle_irq_event+0x80/0x170
[ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc
[ 16.324671] __handle_domain_irq+0x84/0xfc
[ 16.324673] gic_handle_irq+0x88/0x2c0
[ 16.324674] el1_irq+0xb8/0x140
[ 16.324677] arch_cpu_idle+0x18/0x40
[ 16.324679] default_idle_call+0x5c/0x1bc
[ 16.324682] cpuidle_idle_call+0x18c/0x1c4
[ 16.324684] do_idle+0x174/0x17c
[ 16.324685] cpu_startup_entry+0x30/0x6c
[ 16.324687] secondary_start_kernel+0x1a4/0x280
[ 16.324688] ---[ end trace 6aa0bff672a964aa ]---
So don't auto enable misc vector when request irq..
Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the
user process is called next time, save_buf is used to copy the cached
data to the user space. As a result, the queried data is stale.
To solve this problem, this patch implements .open() and .release() handler
for debugfs file_operations. moving allocation buffer and execution
of the cmd to the .open() handler and freeing in to the .release() handler.
Allocate separate buffer for each reader and associate the buffer
with the file pointer.
When different user read processes no longer share the buffer,
the stale data problem is fixed.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.
The error message:
hns3 0000:39:01.0: cmd failed -16
hns3 0000:39:01.0: hclge device re-init failed, VF is disabled!
hns3 0000:39:01.0: failed to reset VF stack
hns3 0000:39:01.0: failed to reset VF(4)
hns3 0000:39:01.0: prepare reset(2) wait done
hns3 0000:39:01.0 eth4: already uninitialized
Use the crash tool to view struct hclgevf_dev:
struct hclgevf_dev {
...
default_reset_request = 0x20,
reset_level = HNAE3_NONE_RESET,
reset_pending = 0x100,
reset_type = HNAE3_NONE_RESET,
...
};
Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a follow-up to 3c5b4d69c358 ("net: annotate data-races around
sk->sk_mark"). sk->sk_mark can be read and written without holding
the socket lock. IPv6 equivalent is already covered with READ_ONCE()
annotation in tcp_v6_send_response().
Fixes: 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/f459d1fc44f205e13f6d8bdca2c8bfb9902ffac9.1736244569.git.daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The NAPI IDs were not fully exposed to user space prior to the netlink
API, so they were never namespaced. The netlink API must ensure that
at the very least NAPI instance belongs to the same netns as the owner
of the genl sock.
napi_by_id() can become static now, but it needs to move because of
dev_get_by_napi_id().
Cc: stable@vger.kernel.org
Fixes: 1287c1ae0fc2 ("netdev-genl: Support setting per-NAPI config values")
Fixes: 27f91aaf49b3 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250106180137.1861472-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-array fixes
- dm-verity forward error correction fixes
- remove the flag DM_TARGET_PASSES_INTEGRITY from dm-ebs
- dm-thin RCU list fix
* tag 'for-6.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: make get_first_thin use rcu-safe list first function
dm-ebs: don't set the flag DM_TARGET_PASSES_INTEGRITY
dm-verity FEC: Avoid copying RS parity bytes twice.
dm-verity FEC: Fix RS FEC repair for roots unaligned to block size (take 2)
dm array: fix cursor index when skipping across block boundaries
dm array: fix unreleased btree blocks on closing a faulty array cursor
dm array: fix releasing a faulty array block twice in dm_array_cursor_end
|
|
Use usb_autopm_get_interface() and usb_autopm_put_interface()
in btmtk_usb_shutdown(), it could send func ctrl after enabling
autosuspend.
Bluetooth: btmtk_usb_hci_wmt_sync() hci0: Execution of wmt command
timed out
Bluetooth: btmtk_usb_shutdown() hci0: Failed to send wmt func ctrl
(-110)
Fixes: 5c5e8c52e3ca ("Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the apparent controller hang issue seen during stress test
where the host sends a truncated payload, followed by HCI commands. The
controller treats these HCI commands as a part of previously truncated
payload, leading to command timeouts.
Adding a serdev_device_wait_until_sent() call after
serdev_device_write_buf() fixed the issue.
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add Device with LE type requires updating resolving/accept list which
requires quite a number of commands to complete and each of them may
fail, so instead of pretending it would always work this checks the
return of hci_update_passive_scan_sync which indicates if everything
worked as intended.
Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes errors such as the following when Own address type is set to
Random Address but it has not been programmed yet due to either be
advertising or connecting:
< HCI Command: LE Set Exte.. (0x08|0x0041) plen 13
Own address type: Random (0x03)
Filter policy: Ignore not in accept list (0x01)
PHYs: 0x05
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Entry 1: LE Coded
Type: Passive (0x00)
Interval: 180.000 msec (0x0120)
Window: 90.000 msec (0x0090)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Exten.. (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Enable (0x08|0x0042) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Fixes: c45074d68a9b ("Bluetooth: Fix not generating RPA when required")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The documentation in rculist.h explains the absence of list_empty_rcu()
and cautions programmers against relying on a list_empty() ->
list_first() sequence in RCU safe code. This is because each of these
functions performs its own READ_ONCE() of the list head. This can lead
to a situation where the list_empty() sees a valid list entry, but the
subsequent list_first() sees a different view of list head state after a
modification.
In the case of dm-thin, this author had a production box crash from a GP
fault in the process_deferred_bios path. This function saw a valid list
head in get_first_thin() but when it subsequently dereferenced that and
turned it into a thin_c, it got the inside of the struct pool, since the
list was now empty and referring to itself. The kernel on which this
occurred printed both a warning about a refcount_t being saturated, and
a UBSAN error for an out-of-bounds cpuid access in the queued spinlock,
prior to the fault itself. When the resulting kdump was examined, it
was possible to see another thread patiently waiting in thin_dtr's
synchronize_rcu.
The thin_dtr call managed to pull the thin_c out of the active thins
list (and have it be the last entry in the active_thins list) at just
the wrong moment which lead to this crash.
Fortunately, the fix here is straight forward. Switch get_first_thin()
function to use list_first_or_null_rcu() which performs just a single
READ_ONCE() and returns NULL if the list is already empty.
This was run against the devicemapper test suite's thin-provisioning
suites for delete and suspend and no regressions were observed.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Fixes: b10ebd34ccca ("dm thin: fix rcu_read_lock being held in code that can sleep")
Cc: stable@vger.kernel.org
Acked-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
dm-ebs uses dm-bufio to process requests that are not aligned on logical
sector size. dm-bufio doesn't support passing integrity data (and it is
unclear how should it do it), so we shouldn't set the
DM_TARGET_PASSES_INTEGRITY flag.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: d3c7b35c20d6 ("dm: add emulated block size target")
|
|
'intel-wired-lan-driver-updates-2025-01-06-igb-igc-ixgbe-ixgbevf-i40e-fm10k'
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-01-06 (igb, igc, ixgbe, ixgbevf, i40e, fm10k)
For igb:
Sriram Yagnaraman and Kurt Kanzenbach add support for AF_XDP
zero-copy.
Original cover letter:
The first couple of patches adds helper functions to prepare for AF_XDP
zero-copy support which comes in the last couple of patches, one each
for Rx and TX paths.
As mentioned in v1 patchset [0], I don't have access to an actual IGB
device to provide correct performance numbers. I have used Intel 82576EB
emulator in QEMU [1] to test the changes to IGB driver.
The tests use one isolated vCPU for RX/TX and one isolated vCPU for the
xdp-sock application [2]. Hope these measurements provide at the least
some indication on the increase in performance when using ZC, especially
in the TX path. It would be awesome if someone with a real IGB NIC can
test the patch.
AF_XDP performance using 64 byte packets in Kpps.
Benchmark: XDP-SKB XDP-DRV XDP-DRV(ZC)
rxdrop 220 235 350
txpush 1.000 1.000 410
l2fwd 1.000 1.000 200
AF_XDP performance using 1500 byte packets in Kpps.
Benchmark: XDP-SKB XDP-DRV XDP-DRV(ZC)
rxdrop 200 210 310
txpush 1.000 1.000 410
l2fwd 0.900 1.000 160
[0]: https://lore.kernel.org/intel-wired-lan/20230704095915.9750-1-sriram.yagnaraman@est.tech/
[1]: https://www.qemu.org/docs/master/system/devices/igb.html
[2]: https://github.com/xdp-project/bpf-examples/tree/master/AF_XDP-example
Subsequent changes and information can be found here:
https://lore.kernel.org/intel-wired-lan/20241018-b4-igb_zero_copy-v9-0-da139d78d796@linutronix.de/
Yue Haibing converts use of ERR_PTR return to traditional error code
which resolves a smatch warning.
For igc:
Song Yoong Siang allows for the XDP program to be hot-swapped.
Yue Haibing converts use of ERR_PTR return to traditional error code
which resolves a smatch warning.
Joe Damato adds sets IRQ and queues to NAPI instances to allow for
reporting via netdev-genl API.
For ixgbe:
Yue Haibing converts use of ERR_PTR return to traditional error code
which resolves a smatch warning.
For ixgbevf:
Yue Haibing converts use of ERR_PTR return to traditional error code
which resolves a smatch warning.
For i40e:
Alex implements "mdd-auto-reset-vf" private flag to automatically reset
VFs when encountering an MDD event.
For fm10k:
Dr. David Alan Gilbert removes an unused function.
====================
Link: https://patch.msgid.link/20250106221929.956999-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fm10k_iov_msg_mac_vlan_pf() has been unused since 2017's
commit 1f5c27e52857 ("fm10k: use the MAC/VLAN queue for VF<->PF MAC/VLAN
requests")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-16-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link queues to NAPI instances via netdev-genl API so that users can
query this information with netlink. Handle a few cases in the driver:
1. Link/unlink the NAPIs when XDP is enabled/disabled
2. Handle IGC_FLAG_QUEUE_PAIRS enabled and disabled
Example output when IGC_FLAG_QUEUE_PAIRS is enabled:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'tx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'tx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'tx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'tx'}]
Since IGC_FLAG_QUEUE_PAIRS is enabled, you'll note that the same NAPI ID
is present for both rx and tx queues at the same index, for example
index 0:
{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'tx'},
To test IGC_FLAG_QUEUE_PAIRS disabled, a test system was booted using
the grub command line option "maxcpus=2" to force
igc_set_interrupt_capability to disable IGC_FLAG_QUEUE_PAIRS.
Example output when IGC_FLAG_QUEUE_PAIRS is disabled:
$ lscpu | grep "On-line CPU"
On-line CPU(s) list: 0,2
$ ethtool -l enp86s0 | tail -5
Current hardware settings:
RX: n/a
TX: n/a
Other: 1
Combined: 2
$ cat /proc/interrupts | grep enp
144: [...] enp86s0
145: [...] enp86s0-rx-0
146: [...] enp86s0-rx-1
147: [...] enp86s0-tx-0
148: [...] enp86s0-tx-1
1 "other" IRQ, and 2 IRQs for each of RX and Tx, so we expect netlink to
report 4 IRQs with unique NAPI IDs:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'id': 8196, 'ifindex': 2, 'irq': 148},
{'id': 8195, 'ifindex': 2, 'irq': 147},
{'id': 8194, 'ifindex': 2, 'irq': 146},
{'id': 8193, 'ifindex': 2, 'irq': 145}]
Now we examine which queues these NAPIs are associated with, expecting
that since IGC_FLAG_QUEUE_PAIRS is disabled each RX and TX queue will
have its own NAPI instance:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8195, 'type': 'tx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8196, 'type': 'tx'}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-15-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link IRQs to NAPI instances via netdev-genl API so that users can query
this information with netlink.
Compare the output of /proc/interrupts (noting that IRQ 128 is the
"other" IRQ which does not appear to have a NAPI instance):
$ cat /proc/interrupts | grep enp86s0 | cut --delimiter=":" -f1
128
129
130
131
132
The output from netlink shows the mapping of NAPI IDs to IRQs (again
noting that 128 is absent as it is the "other" IRQ):
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8196,
'ifindex': 2,
'irq': 132},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8195,
'ifindex': 2,
'irq': 131},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8194,
'ifindex': 2,
'irq': 130},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8193,
'ifindex': 2,
'irq': 129}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-14-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement "mdd-auto-reset-vf" priv-flag to handle Tx and Rx MDD events for VFs.
This flag is also used in other network adapters like ICE.
Usage:
- "on" - The problematic VF will be automatically reset
if a malformed descriptor is detected.
- "off" - The problematic VF will be disabled.
In cases where a VF sends malformed packets classified as malicious, it can
cause the Tx queue to freeze, rendering it unusable for several minutes. When
an MDD event occurs, this new implementation allows for a graceful VF reset to
quickly restore operational state.
Currently, VF queues are disabled if an MDD event occurs. This patch adds the
ability to reset the VF if a Tx or Rx MDD event occurs. It also includes MDD
event logging throttling to avoid dmesg pollution and unifies the format of
Tx and Rx MDD messages.
Note: Standard message rate limiting functions like dev_info_ratelimited()
do not meet our requirements. Custom rate limiting is implemented,
please see the code for details.
Co-developed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Co-developed-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-13-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ixgbevf_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
ixgbevf_clean_rx_irq(). Remove this error pointer handing instead use
plain int return value.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-12-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ixgbe_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
ixgbe_clean_rx_irq(). Remove this error pointer handing instead use
plain int return value.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
igb_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
igb_clean_rx_irq(). Remove this error pointer handing instead use plain
int return value.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
igc_xdp_run_prog() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
igc_clean_rx_irq(). Remove this error pointer handing instead use plain
int return value to fix this smatch warnings:
drivers/net/ethernet/intel/igc/igc_main.c:2533
igc_xdp_run_prog() warn: passing zero to 'ERR_PTR'
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the driver would always close and reopen the network interface
when setting/removing the XDP program, regardless of the presence of XDP
resources. This could cause unnecessary disruptions.
To avoid this, introduces a check to determine if there is a need to
close and reopen the interface, allowing for seamless hot-swapping of
XDP programs.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for AF_XDP zero-copy transmit path.
A new TX buffer type IGB_TYPE_XSK is introduced to indicate that the Tx
frame was allocated from the xsk buff pool, so igb_clean_tx_ring() and
igb_clean_tx_irq() can clean the buffers correctly based on type.
igb_xmit_zc() performs the actual packet transmit when AF_XDP zero-copy is
enabled. We share the TX ring between slow path, XDP and AF_XDP
zero-copy, so we use the netdev queue lock to ensure mutual exclusion.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Set olinfo_status in igb_xmit_zc() so that frames are transmitted,
Use READ_ONCE() for xsk_pool and check Tx disabled and carrier in
igb_xmit_zc(), Add FIXME for RS bit]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-7-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for AF_XDP zero-copy receive path.
When AF_XDP zero-copy is enabled, the rx buffers are allocated from the
xsk buff pool using igb_alloc_rx_buffers_zc().
Use xsk_pool_get_rx_frame_size() to set SRRCTL rx buf size when zero-copy
is enabled.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Port to v6.12 and provide napi_id for xdp_rxq_info_reg(),
RCT, remove NETDEV_XDP_ACT_XSK_ZEROCOPY, update NTC handling,
READ_ONCE() xsk_pool, likelyfy for XDP_REDIRECT case]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move XDP finalize and Rx statistics update into separate functions. This
way, they can be reused by the XDP and XDP/ZC code later.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the following ring flag:
- IGB_RING_FLAG_TX_DISABLED (when xsk pool is being setup)
Add a xdp_buff array for use with XSK receive batch API, and a pointer
to xsk_pool in igb_adapter.
Add enable/disable functions for TX and RX rings.
Add enable/disable functions for XSK pool.
Add xsk wakeup function.
None of the above functionality will be active until
NETDEV_XDP_ACT_XSK_ZEROCOPY is advertised in netdev->xdp_features.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Add READ/WRITE_ONCE(), synchronize_net(),
remove IGB_RING_FLAG_AF_XDP_ZC]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce igb_xdp_is_enabled() to check if an XDP program is assigned to
the device. Use that wherever xdp_prog is read and evaluated.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Split patches and use READ_ONCE()]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove static qualifiers on the following functions to be able to call
from XSK specific file that is added in the later patches:
- igb_xdp_tx_queue_mapping()
- igb_xdp_ring_update_tail()
- igb_clean_tx_ring()
- igb_clean_rx_ring()
- igb_xdp_xmit_back()
- igb_process_skb_fields()
While at it, inline igb_xdp_tx_queue_mapping() and
igb_xdp_ring_update_tail(). These functions are small enough and used in
XDP hot paths.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Split patches, inline small XDP functions]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
tools: ynl: decode link types present in tests
Using a kernel built for the net selftest target to run drivers/net
tests currently fails, because the net kernel automatically spawns
a handful of tunnel devices which YNL can't decode.
Fill in those missing link types in rt_link. We need to extend subset
support a bit for it to work.
v1: https://lore.kernel.org/20250105012523.1722231-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250107022820.2087101-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some of our tests load vti and ip6tnl so not being able to decode
the link attrs gets in the way of using Python YNL for testing.
Decode link attributes for ip6tnl, vti and vti6.
ip6tnl uses IFLA_IPTUN_FLAGS as u32, while ipv4 and sit expect
a u16 attribute, so we have a (first?) subset type override...
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250107022820.2087101-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When parsing throws an exception one often has to figure out which
attribute couldn't be parsed from first principles. For families
with large message parsing trees like rtnetlink guessing the
attribute can be hard.
Print a bit of information as the exception travels out, e.g.:
# when dumping rt links
Error decoding 'flags' from 'linkinfo-ip6tnl-attrs'
Error decoding 'data' from 'linkinfo-attrs'
Error decoding 'linkinfo' from 'link-attrs'
Traceback (most recent call last):
File "/home/kicinski/linux/./tools/net/ynl/cli.py", line 119, in <module>
main()
File "/home/kicinski/linux/./tools/net/ynl/cli.py", line 100, in main
reply = ynl.dump(args.dump, attrs)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 1064, in dump
return self._op(method, vals, dump=True)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 1058, in _op
return self._ops(ops)[0]
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 1045, in _ops
rsp_msg = self._decode(decoded.raw_attrs, op.attr_set.name)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 738, in _decode
subdict = self._decode(NlAttrs(attr.raw), attr_spec['nested-attributes'], search_attrs)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 763, in _decode
decoded = self._decode_sub_msg(attr, attr_spec, search_attrs)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 714, in _decode_sub_msg
subdict = self._decode(NlAttrs(attr.raw, offset), msg_format.attr_set)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 749, in _decode
decoded = attr.as_scalar(attr_spec['type'], attr_spec.byte_order)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 147, in as_scalar
return format.unpack(self.raw)[0]
struct.error: unpack requires a buffer of 2 bytes
The Traceback is what we would previously see, the "Error..."
messages are new. We print a message per level (in the stack
order). Printing single combined message gets tricky quickly
given sub-messages etc.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250107022820.2087101-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We stated in documentation [1] and previous discussions [2]
that the need for overriding fields in members of subsets
is anticipated. Implement it.
Since each attr is now a new object we need to make sure
that the modifications are propagated. Specifically C codegen
wants to annotate which attrs are used in requests and replies
to generate the right validation artifacts.
[1] https://docs.kernel.org/next/userspace-api/netlink/specs.html#subset-of
[2] https://lore.kernel.org/netdev/20231004171350.1f59cd1d@kernel.org/
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250107022820.2087101-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit f85949f98206 ("xdp: add xdp_set_features_flag utility routine")
added routines to inform the core about XDP flag changes.
GVE support was added around the same time and missed using them.
GVE only changes the flags on error recover or resume.
Presumably the flags may change during resume if VM migrated.
User would not get the notification and upper devices would
not get a chance to recalculate their flags.
Fixes: 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format")
Reviewed-By: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250106180210.1861784-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While merging net to net-next I noticed that the kdoc above
__vlan_get_protocol_offset() has the wrong function name.
Fix that and all the other kdoc warnings in this file.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250106174620.1855269-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: dsa: cleanup EEE (part 2)
This is part 2 of the DSA EEE cleanups, removing what has become dead
code as a result of the EEE management phylib now does.
Patch 1 removes the useless setting of tx_lpi parameters in the
ksz driver.
Patch 2 does the same for mt753x.
Patch 3 removes the DSA core code that calls the get_mac_eee() operation.
This needs to be done before removing the implementations because doing
otherwise would cause dsa_user_get_eee() to return -EOPNOTSUPP.
Patches 4..8 remove the trivial get_mac_eee() implementations from DSA
drivers.
Patch 9 finally removes the get_mac_eee() method from struct
dsa_switch_ops.
====================
Link: https://patch.msgid.link/Z3vDwwsHSxH5D6Pm@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
