| Age | Commit message (Collapse) | Author |
|---|
|
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a us_to_ktime() helper to go with ms_to_ktime() and ns_to_ktime().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Thomas Gleixner <tglx@linutronix.de>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
utf8s_to_utf16s() specifies pwcs as a wchar_t pointer (whether big endian
or little endian is passed in as an additional parm), so to remove a
distracting compile warning it needs to be cast as (wchar_t *) in
parse_reparse_wsl_symlink() as done by other callers.
Fixes: 06a7adf318a3 ("cifs: Add support for parsing WSL-style symlinks")
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In acpi_decode_space() addr->info.mem.caching is checked on main level
for any resource type but addr->info.mem is part of union and thus
valid only if the resource type is memory range.
Move the check inside the preceeding switch/case to only execute it
when the union is of correct type.
Fixes: fcb29bbcd540 ("ACPI: Add prefetch decoding to the address space parser")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20241202100614.20731-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
hv_kvp_daemon uses popen(3) and system(3) as convinience helper to
launch external helpers. These helpers are invoked via a
temporary shell process. There is no need to keep this temporary
process around while the helper runs. Replace this temporary shell
with the actual helper process via 'exec'.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/linux-hyperv/20241202123520.27812-1-olaf@aepfle.de/
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Remove generated files from 'git status' output after 'make -C tools/hv'.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20241202124107.28650-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241202124107.28650-1-olaf@aepfle.de>
|
|
Remove the usage of cat. Replace the shell process with awk with 'exec'.
Also use a generic shell because no bash specific features will be used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20241202120432.21115-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241202120432.21115-1-olaf@aepfle.de>
|
|
The reference implementation of hv_get_dns_info which is in the tree uses
/etc/resolv.conf to get DNS servers and this does not require to know which
NIC is queried. Distro specific implementations, however, may want to
provide per-NIC, fine grained information. E.g. NetworkManager keeps track
of DNS servers per connection.
Similar to hv_get_dhcp_info, pass NIC name as a parameter to
hv_get_dns_info script.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241112150401.217094-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241112150401.217094-1-vkuznets@redhat.com>
|
|
If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is
fully initialized, we can hit the panic below:
hv_utils: Registering HyperV Utility Driver
hv_vmbus: registering driver hv_utils
...
BUG: kernel NULL pointer dereference, address: 0000000000000000
CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1
RIP: 0010:hv_pkt_iter_first+0x12/0xd0
Call Trace:
...
vmbus_recvpacket
hv_kvp_onchannelcallback
vmbus_on_event
tasklet_action_common
tasklet_action
handle_softirqs
irq_exit_rcu
sysvec_hyperv_stimer0
</IRQ>
<TASK>
asm_sysvec_hyperv_stimer0
...
kvp_register_done
hvt_op_read
vfs_read
ksys_read
__x64_sys_read
This can happen because the KVP/VSS channel callback can be invoked
even before the channel is fully opened:
1) as soon as hv_kvp_init() -> hvutil_transport_init() creates
/dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and
register itself to the driver by writing a message KVP_OP_REGISTER1 to the
file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and
reading the file for the driver's response, which is handled by
hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done().
2) the problem with kvp_register_done() is that it can cause the
channel callback to be called even before the channel is fully opened,
and when the channel callback is starting to run, util_probe()->
vmbus_open() may have not initialized the ringbuffer yet, so the
callback can hit the panic of NULL pointer dereference.
To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in
__vmbus_open(), just before the first hv_ringbuffer_init(), and then we
unload and reload the driver hv_utils, and run the daemon manually within
the 10 seconds.
Fix the panic by reordering the steps in util_probe() so the char dev
entry used by the KVP or VSS daemon is not created until after
vmbus_open() has completed. This reordering prevents the race condition
from happening.
Reported-by: Dexuan Cui <decui@microsoft.com>
Fixes: e0fa3e5e7df6 ("Drivers: hv: utils: fix a race on userspace daemons registration")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20241106154247.2271-3-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241106154247.2271-3-mhklinux@outlook.com>
|
|
If the util_init function call in util_probe() returns an error code,
util_probe() always return ENODEV, and the error code from the util_init
function is lost. The error message output in the caller, vmbus_probe(),
doesn't show the real error code.
Fix this by just returning the error code from the util_init function.
There doesn't seem to be a reason to force ENODEV, as other errors
such as ENOMEM can already be returned from util_probe(). And the
code in call_driver_probe() implies that ENODEV should mean that a
matching driver wasn't found, which is not the case here.
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20241106154247.2271-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241106154247.2271-2-mhklinux@outlook.com>
|
|
Terminate endless loop in reading fails, to avoid flooding syslog.
This happens if the state of "Guest services" integration service
is changed from "enabled" to "disabled" at runtime in the VM
settings. In this case pread returns EIO.
Also handle an interrupted system call, and continue in this case.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241105081437.15689-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241105081437.15689-1-olaf@aepfle.de>
|
|
We have several places where timeouts are open-coded as N (seconds) * HZ,
but best practice is to use the utility functions from jiffies.h. Convert
the timeouts to be compliant. This doesn't fix any bugs, it's a simple code
improvement.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20241030-open-coded-timeouts-v3-2-9ba123facf88@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241030-open-coded-timeouts-v3-2-9ba123facf88@linux.microsoft.com>
|
|
Align permissions of the resulting .nmconnection file, instead of
the input file from hv_kvp_daemon. To avoid the tiny time frame
where the output file is world-readable, use umask instead of chmod.
Fixes: 42999c904612 ("hv/hv_kvp_daemon:Support for keyfile based connection profile")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241016143521.3735-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241016143521.3735-1-olaf@aepfle.de>
|
|
read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is
bigger than the variable hv_sched_clock_offset, which is cached during
early boot, but depending on the timing this assumption may be false
when a hibernated VM starts again (the clock counter starts from 0
again) and is resuming back (Note: hv_init_tsc_clocksource() is not
called during hibernation/resume); consequently,
read_hv_sched_clock_tsc() may return a negative integer (which is
interpreted as a huge positive integer since the return type is u64)
and new kernel messages are prefixed with huge timestamps before
read_hv_sched_clock_tsc() grows big enough (which typically takes
several seconds).
Fix the issue by saving the Hyper-V clock counter just before the
suspend, and using it to correct the hv_sched_clock_offset in
resume. This makes hv tsc page based sched_clock continuous and ensures
that post resume, it starts from where it left off during suspend.
Override x86_platform.save_sched_clock_state and
x86_platform.restore_sched_clock_state routines to correct this as soon
as possible.
Note: if Invariant TSC is available, the issue doesn't happen because
1) we don't register read_hv_sched_clock_tsc() for sched clock:
See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework
clocksource and sched clock setup");
2) the common x86 code adjusts TSC similarly: see
__restore_processor_state() -> tsc_verify_tsc_adjust(true) and
x86_platform.restore_sched_clock_state().
Cc: stable@vger.kernel.org
Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation")
Co-developed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com>
|
|
hv_fcopy_uio_daemon.c:436:53: warning: '%s' directive output may be truncated
writing up to 14 bytes into a region of size 10 [-Wformat-truncation=]
436 | snprintf(uio_dev_path, sizeof(uio_dev_path), "/dev/%s", uio_name);
Also added 'static' for the array 'desc[]'.
Fixes: 82b0945ce2c2 ("tools: hv: Add new fcopy application based on uio driver")
Cc: stable@vger.kernel.org # 6.10+
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240910004433.50254-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240910004433.50254-1-decui@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.14
This development cycle featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, although the feature is still
incomplete. Also in ath12k, there were other feature patches. In
ath11k, support was added for QCA6698AQ. And there was the usual set
of bug fixes and cleanups across most drivers, notable being the
addition of "noinline_for_stack" to some functions to avoid "stack
frame size" warnings when compiling with clang.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Remove if_not_guard() as it is generating incorrect code
- Fix the initialization of the fake lockdep_map for the first locked
ww_mutex
* tag 'locking_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
headers/cleanup.h: Remove the if_not_guard() facility
locking/ww_mutex: Fix ww_mutex dummy lockdep map selftest warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is drained before reconfiguring the
hardware
- Add Arrow Lake U support
* tag 'perf_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Unconditionally drain PEBS DS when changing PEBS_DATA_CFG
perf/x86/intel: Add Arrow Lake U support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove wrong enqueueing of a task for a later wakeup when a task
blocks on a RT mutex
- Do not setup a new deadline entity on a boosted task as that has
happened already
- Update preempt= kernel command line param
- Prevent needless softirqd wakeups in the idle task's context
- Detect the case where the idle load balancer CPU becomes busy and
avoid unnecessary load balancing invocation
- Remove an unnecessary load balancing need_resched() call in
nohz_csd_func()
- Allow for raising of SCHED_SOFTIRQ softirq type on RT but retain the
warning to catch any other cases
- Remove a wrong warning when a cpuset update makes the task affinity
no longer a subset of the cpuset
* tag 'sched_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: rtmutex: Fix wake_q logic in task_blocks_on_rt_mutex
sched/deadline: Fix warning in migrate_enable for boosted tasks
sched/core: Update kernel boot parameters for LAZY preempt.
sched/core: Prevent wakeup of ksoftirqd during idle load balance
sched/fair: Check idle_cpu() before need_resched() to detect ilb CPU turning busy
sched/core: Remove the unnecessary need_resched() check in nohz_csd_func()
softirq: Allow raising SCHED_SOFTIRQ from SMP-call-function on RT kernel
sched: fix warning in sched_setaffinity
sched/deadline: Fix replenish_dl_new_period dl_server condition
|
|
Build 6.13-rc12 for x86_64 with gcc 14.2.1 fails with the error:
ld: vmlinux.o: in function `virtual_mapped':
linux/arch/x86/kernel/relocate_kernel_64.S:249:(.text+0x5915b): undefined reference to `saved_context_gdt_desc'
when CONFIG_KEXEC_JUMP is enabled.
This was introduced by commit 07fa619f2a40 ("x86/kexec: Restore GDT on
return from ::preserve_context kexec") which introduced a use of
saved_context_gdt_desc without a declaration for it.
Fix that by including asm/asm-offsets.h where saved_context_gdt_desc
is defined (indirectly in include/generated/asm-offsets.h which
asm/asm-offsets.h includes).
Fixes: 07fa619f2a40 ("x86/kexec: Restore GDT on return from ::preserve_context kexec")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Closes: https://lore.kernel.org/oe-kbuild-all/202411270006.ZyyzpYf8-lkp@intel.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The powerpc user access code is special, and unlike other architectures
distinguishes between user access for reading and writing.
And commit 43a43faf5376 ("futex: improve user space accesses") messed
that up. It went undetected elsewhere, but caused ppc32 to fail early
during boot, because the user access had been started with
user_read_access_begin(), but then finished off with just a plain
"user_access_end()".
Note that the address-masking user access helpers don't even have that
read-vs-write distinction, so if powerpc ever wants to do address
masking tricks, we'll have to do some extra work for it.
[ Make sure to also do it for the EFAULT case, as pointed out by
Christophe Leroy ]
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/87bjxl6b0i.fsf@igel.home/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit 52250cbee7f6 ("mwifiex: use timeout variant for
wait_event_interruptible") it was noted that sometimes we seemed
to miss the signal that our host sleep settings took effect. A
10 second timeout was added to the code to make sure we didn't
hang forever waiting. It appears that this problem still exists
and we hit the timeout sometimes for Chromebooks in the field.
Recently on ChromeOS we've started setting the DPM watchdog
to trip if full system suspend takes over 10 seconds. Given
the timeout in the original patch, obviously we're hitting
the DPM watchdog before mwifiex gets a chance to timeout.
While we could increase the DPM watchdog in ChromeOS to avoid
this problem, it's probably better to simply decrease the
timeout. Any time we're waiting several seconds for the
firmware to respond it's likely that the firmware won't ever
respond. With that in mind, decrease the timeout in mwifiex
from 10 seconds to 5 seconds.
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241127105709.4014302-1-treapking@chromium.org
|
|
This removes the following error log when stopping AP:
ieee80211 phy0: brcmf_vif_set_mgmt_ie: vndr ie set error : -52
It happened if:
1) previously wlan interface was in station mode (wpa_supplicant) and
connected to a hotspot
2) then started AP mode (hostapd)
3) and then stopped AP mode.
The error happened when it tried to clear BRCMF_VNDR_IE_PRBREQ_FLAG.
This flag is not set in `brcmf_config_ap_mgmt_ie`, but
BRCMF_VNDR_IE_ASSOCRSP_FLAG is set instead.
Signed-off-by: Renjaya Raga Zenta <ragazenta@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241121-brcmfmac-v1-1-02fc3fb427c2@gmail.com
|
|
'struct nla_policy' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
5062 528 0 5590 15d6 drivers/net/wireless/ti/wlcore/testmode.o
After:
=====
text data bss dec hex filename
5178 404 0 5582 15ce drivers/net/wireless/ti/wlcore/testmode.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/78810e3ebb74ddbd3a4538f182bf1143b89baba7.1731332414.git.christophe.jaillet@wanadoo.fr
|
|
The scatter-gather handling uses a pre-allocated list (with nents entries).
If the driver runs out of sg entries it will result in an oops. Let's detect
this instead and make the SDIO block transfer fail.
Signed-off-by: Norbert van Bolhuis <nvbolhuis@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241108125609.107016-1-nvbolhuis@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fix for v6.13
Fix for the build issue in the ASoC driver with the SCMI support by
enforcing the link-time dependency if IMX_SCMI_MISC_DRV is a loadable
module but not if that is disabled.
* tag 'scmi-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix i.MX build dependency
Link: https://lore.kernel.org/r/20241205114348.708618-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Armv8 Juno fix for v6.13
Just a single fix updating the PCIe bus address range to accommodate
the full ECAM window of 256MB available on most of the recent versions
of RevC FVP models.
* tag 'juno-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: fvp: Update PCIe bus-range property
Link: https://lore.kernel.org/r/20241205114302.708433-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Daniel Machon says:
====================
net: sparx5: misc fixes for sparx5 and lan969x
This series fixes various issues in the Sparx5 and lan969x drivers. Most
of the fixes are for new issues introduced by the recent series adding
lan969x switch support in the Sparx5 driver.
Most notable is patch 1/5 that moves the lan969x dir into the sparx5
dir, in order to address a cyclic dependency issue reported by depmod,
when installing modules. Details are in the commit descriptions.
To: Andrew Lunn <andrew+netdev@lunn.ch>
To: David S. Miller <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Lars Povlsen <lars.povlsen@microchip.com>
To: Steen Hegelund <Steen.Hegelund@microchip.com>
To: UNGLinuxDriver@microchip.com
To: Richard Cochran <richardcochran@gmail.com>
To: Bjarni Jonasson <bjarni.jonasson@microchip.com>
To: jensemil.schulzostergaard@microchip.com
To: horatiu.vultur@microchip.com
To: arnd@arndb.de
To: jacob.e.keller@intel.com
To: Parthiban.Veerasooran@microchip.com
Cc: Calvin Owens <calvin@wbinvd.org>
Cc: Muhammad Usama Anjum <Usama.Anjum@collabora.com>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
====================
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On port initialization, we configure the maximum frame length accepted
by the receive module associated with the port. This value is currently
written to the MAX_LEN field of the DEV10G_MAC_ENA_CFG register, when in
fact, it should be written to the DEV10G_MAC_MAXLEN_CFG register. Fix
this.
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When doing port mirroring, the physical port to send the frame to, is
written to the FRMC_PORT_VAL field of the QFWD_FRAME_COPY_CFG register.
This field is 7 bits wide on sparx5 and 6 bits wide on lan969x, and has
a default value of 65 and 30, respectively (the number of front ports).
On mirror deletion, we set the default value of the monitor port to
65 for this field, in case no more ports exists for the mirror. Needless
to say, this will not fit the 6 bits on lan969x.
Fix this by correctly using the n_ports constant instead.
Fixes: 3f9e46347a46 ("net: sparx5: use SPX5_CONST for constants which already have a symbol")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The FDMA handler is responsible for scheduling a NAPI poll, which will
eventually fetch RX packets from the FDMA queue. Currently, the FDMA
handler is run in a threaded context. For some reason, this kills
performance. Admittedly, I did not do a thorough investigation to see
exactly what causes the issue, however, I noticed that in the other
driver utilizing the same FDMA engine, we run the FDMA handler in hard
IRQ context.
Fix this performance issue, by running the FDMA handler in hard IRQ
context, not deferring any work to a thread.
Prior to this change, the RX UDP performance was:
Interval Transfer Bitrate Jitter
0.00-10.20 sec 44.6 MBytes 36.7 Mbits/sec 0.027 ms
After this change, the rx UDP performance is:
Interval Transfer Bitrate Jitter
0.00-9.12 sec 1.01 GBytes 953 Mbits/sec 0.020 ms
Fixes: 10615907e9b5 ("net: sparx5: switchdev: adding frame DMA functionality")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We are mixing the use of spin_lock() and spin_lock_irqsave() functions
in the PTP handler of lan969x. Fix this by correctly using the _irqsave
variants.
Fixes: 24fe83541755 ("net: lan969x: add PTP handler function")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
[1]: https://lore.kernel.org/netdev/20241024-sparx5-lan969x-switch-driver-2-v2-10-a0b5fae88a0f@microchip.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Depmod reports a cyclic dependency between modules sparx5-switch.ko and
lan969x-switch.ko:
depmod: ERROR: Cycle detected: lan969x_switch -> sparx5_switch -> lan969x_switch
depmod: ERROR: Found 2 modules in dependency cycles!
make[2]: *** [scripts/Makefile.modinst:132: depmod] Error 1
make: *** [Makefile:224: __sub-make] Error 2
This makes sense, as they both require symbols from each other.
Fix this by compiling lan969x support into the sparx5-switch.ko module.
In order to do this, in a sensible way, we move the lan969x/ dir into
the sparx5/ dir and do some code cleanup of code that is no longer
required.
After this patch, depmod will no longer complain, as lan969x support is
compiled into the sparx5-swicth.ko module, and can no longer be compiled
as a standalone module.
Fixes: 98a01119608d ("net: sparx5: add compatible string for lan969x")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
STIG mode is enabled by default for less than 8 bytes data read/write.
STIG mode doesn't work with Altera SocFPGA platform due hardware
limitation.
Add a quirks to disable STIG mode for Altera SoCFPGA platform.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Link: https://patch.msgid.link/20241204063338.296959-1-niravkumar.l.rabara@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The early bail out that caused an out-of-bounds write was removed with
commit 5c018e378f91 ("spi: spi-rockchip: Fix out of bounds array
access")
Unfortunately that caused the PM runtime count to be unbalanced and
underflowed on the first call. To fix that reintroduce a no-op check
by reading the register directly.
Cc: stable@vger.kernel.org
Fixes: 5c018e378f91 ("spi: spi-rockchip: Fix out of bounds array access")
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/1f2b3af4-2b7a-4ac8-ab95-c80120ebf44c@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A aspeed_spi_start_user() is not balanced by a corresponding
aspeed_spi_stop_user().
Add the missing call.
Fixes: e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/4052aa2f9a9ea342fa6af83fa991b55ce5d5819e.1732051814.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
AXP717 datasheet says that regulator ramp delay is 15.625 us/step,
which is 10mV in our case.
Add a AXP_DESC_RANGES_DELAY macro and update AXP_DESC_RANGES macro to
expand to AXP_DESC_RANGES_DELAY with ramp_delay = 0
For DCDC4, steps is 100mv
Add a AXP_DESC_DELAY macro and update AXP_DESC macro to
expand to AXP_DESC_DELAY with ramp_delay = 0
This patch fix crashes when using CPU DVFS.
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Tested-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717")
Link: https://patch.msgid.link/20241208124308.5630-1-simons.philippe@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add description of the PMU node for the WCN6750B module.
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241209103455.9675-2-quic_janathot@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bharat Bhushan says:
====================
cn10k-ipsec: Add outbound inline ipsec support
This patch series adds outbound inline ipsec support on Marvell
cn10k series of platform. One crypto hardware logical function
(cpt-lf) per netdev is required for inline ipsec outbound
functionality. Software prepare and submit crypto hardware
(CPT) instruction for outbound inline ipsec crypto mode offload.
The CPT instruction have details for encryption and authentication
Crypto hardware encrypt, authenticate and provide the ESP packet
to network hardware logic to transmit ipsec packet.
First patch makes dma memory writable for in-place encryption,
Second patch moves code to common file, Third patch disable
backpressure on crypto (CPT) and network (NIX) hardware.
Patch four onwards enables inline outbound ipsec.
v9->v10:
- Removed unlikely() in data-patch and used static_branch when at least
a SA is configured.
- Added missing READ_ONCE() as per comment on previous patch
- Removed "\n" from end of extack messages
- Poll for context write status check reduced to 100ms from 10s
v8->v9:
- Removed mutex lock to use hardware, now using hardware state
- Previous versions were supporting only 64 SAs and a bitmap was
used for same. That limitation is removed from this version.
- Replaced netdev_err with NL_SET_ERR_MSG_MOD in state add flow
as per comment in previous version
v7->v8:
- spell correction in patch 1/8 (s/sdk/skb)
v6->v7:
- skb data was mapped as device writeable but it was not ensured
that skb is writeable. This version calls skb_unshare() to make
skb data writeable (Thanks Jakub Kicinski for pointing out).
v4->v5:
- Fixed un-initialized warning and pointer check
(comment from Kalesh Anakkur Purayil)
v3->v4:
- Few error messages in data-path removed and some moved
under netif_msg_tx_err().
- Added check for crypto offload (XFRM_DEV_OFFLOAD_CRYPTO)
Thanks "Leon Romanovsky" for pointing out
- Fixed codespell error as per comment from Simon Horman
- Added some other cleanup comment from Kalesh Anakkur Purayil
v2->v3:
- Fix smatch and sparse errors (Comment from Simon Horman)
- Fix build error with W=1 (Comment from Simon Horman)
https://patchwork.kernel.org/project/netdevbpf/patch/20240513105446.297451-6-bbhushan2@marvell.com/
- Some other minor cleanup as per comment
https://www.spinics.net/lists/netdev/msg997197.html
v1->v2:
- Fix compilation error to build driver a module
- Use dma_wmb() instead of architecture specific barrier
- Fix couple of other compilation warnings
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hardware is initialized and netdev transmit flow is
hooked up for outbound ipsec crypto offload, so finally
enable ipsec offload.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow to use hardware offload for outbound ipsec crypto
mode if security association (SA) is set for a given skb.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prepare and submit crypto hardware (CPT) instruction for
outbound ipsec crypto offload. The CPT instruction have
authentication offset, IV offset and encapsulation offset
in input packet. Also provide SA context pointer which have
details about algo, keys, salt etc. Crypto hardware encrypt,
authenticate and provide the ESP packet to networking hardware.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support to add and delete Security Association
(SA) xfrm ops. Hardware maintains SA context in memory allocated
by software. Each SA context is 128 byte aligned and size of
each context is multiple of 128-byte. Add support for transport
and tunnel ipsec mode, ESP protocol, aead aes-gcm-icv16, key size
128/192/256-bits with 32bit salt.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One crypto hardware logical function (cpt-lf) per netdev is
required for outbound ipsec crypto offload. Allocate, attach
and initialize one crypto hardware function when enabling
outbound ipsec crypto offload. Crypto hardware function will
be detached and freed on disabling outbound ipsec crypto
offload.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NIX can assert backpressure to CPT on the NIX<=>CPT link.
Keep the backpressure disabled for now. NIX block anyways
handles backpressure asserted by MAC due to PFC or flow
control pkts.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move skb fragment map/unmap function to common file
so as to reuse same for outbound IPsec crypto offload
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Crypto hardware need write permission for in-place encrypt
or decrypt operation on skb-data to support IPsec crypto
offload. That patch uses skb_unshare to make skb data writeable
for ipsec crypto offload and map skb fragment memory as
device read-write.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vincent and Dietmar noted that while
commit fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE") fixes
the entity runnable stats, it does not adjust the cfs_rq runnable stats,
which are based off of h_nr_running.
Track h_nr_delayed such that we can discount those and adjust the
signal.
Fixes: fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE")
Closes: https://lore.kernel.org/lkml/a9a45193-d0c6-4ba2-a822-464ad30b550e@arm.com/
Closes: https://lore.kernel.org/lkml/CAKfTPtCNUvWE_GX5LyvTF-WdxUT=ZgvZZv-4t=eWntg5uOFqiQ@mail.gmail.com/
[ Fixes checkpatch warnings and rebased ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-3-vincent.guittot@linaro.org
|
|
We can't stop the tick of a rq if there are at least 2 tasks enqueued in
the whole hierarchy and not only at the root cfs rq.
rq->cfs.nr_running tracks the number of sched_entity at one level
whereas rq->cfs.h_nr_running tracks all queued tasks in the
hierarchy.
Fixes: 11cc374f4643b ("sched_ext: Simplify scx_can_stop_tick() invocation in sched_can_stop_tick()")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-2-vincent.guittot@linaro.org
|
|
Adam reports that enabling NEXT_BUDDY insta triggers a WARN in
pick_next_entity().
Moving clear_buddies() up before the delayed dequeue bits ensures
no ->next buddy becomes delayed. Further ensure no new ->next buddy
ever starts as delayed.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Reported-by: Adam Li <adamli@os.amperecomputing.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Adam Li <adamli@os.amperecomputing.com>
Link: https://lkml.kernel.org/r/670a0d54-e398-4b1f-8a6e-90784e2fdf89@amd.com
|
