| Age | Commit message (Collapse) | Author |
|---|
|
DW eDMA driver private data is preserved in the passed DW eDMA chip info
structure. If the probe fails or for some reason the passed info object
doesn't have the private data pointer initialized, halt the DMA device
cleanup procedure to prevent system crashes.
Link: https://lore.kernel.org/r/20230113171409.30470-23-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Using an abstract number as the DW eDMA chip identifier isn't practical
because there can be more than one DW eDMA controller on the platform. Some
may be detected as the PCIe Endpoints, and others may be embedded in DW
PCIe Root Port/Endpoint controllers. An abstract number in, for instance,
the IRQ handlers list, doesn't give a notion regarding their reference to
the particular DMA controller.
To preserve the code simplicity and support multi-eDMA platforms, use the
parental device name to create the DW eDMA controller name.
Link: https://lore.kernel.org/r/20230113171409.30470-22-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
There is no point in allocating additional memory for the data target
regions passed to the client drivers. Use the already available structures
defined in the dw_edma_chip instance.
Note: these regions are unused in normal circumstances since they are
specific to the case of eDMA being embedded into the DW PCIe Endpoint and
having its CSRs accessible via an Endpoint BAR. This case is only known to
be implemented as a part of the Synopsys PCIe Endpoint IP prototype kit.
Link: https://lore.kernel.org/r/20230113171409.30470-21-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of splitting 64-bits IOs up into two 32-bits ones, use the existing
non-atomic readq()/writeq() functions. By doing so we can discard
CONFIG_64BIT #ifdefs from the code.
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Previously, readq_ch() did a 64-bit readq(), but truncated the result by
storing it in the u32 "value". Change "value" to u64 to avoid the
truncation.
Note: the method is currently unused, so the bug hasn't caused any problem
so far.
Fixes: 04e0a39fc10f ("dmaengine: dw-edma: Add writeq() and readq() for 64 bits architectures")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Since all DW eDMA read and write channels are now installed in a framework
of a single DMA engine device, move all the DW eDMA-specific debugfs nodes
into a ready-to-use DMA-engine debugfs subdirectory. It's created during
the DMA-device registration and can be found in the dma_device.dbg_dev_root
field.
Link: https://lore.kernel.org/r/20230113171409.30470-19-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
There is no point in splitting read/write channels. First of all, eDMA
read and write channels belong to one physical controller. Secondly,
channel differentiation can be done by filtering and dma_get_slave_caps().
Finally, having these channels handled separately needlessly complicates
the code and causes this debugfs warning:
debugfs: Directory '1f052000.pcie' with parent 'dmaengine' already present!
Join the read/write channels into a single DMA device. Client drivers can
choose the correct channel via the DMA slave direction setting. The default
value is overridden by the dw_edma_device_caps() callback in accordance
with the channel type.
Link: https://lore.kernel.org/r/20230113171409.30470-18-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The last thing that stops the debugfs part of the eDMA driver from
supporting multi-eDMA platforms is keeping the eDMA private data pointer in
the static area of the debugfs module. Since the debugfs node descriptors
are now heap-allocated, we can freely move that pointer to being preserved
in the descriptors. After the debugfs initialization procedure, that
pointer will be used in the debugfs files getter to access the common CSRs
space and the context CSRs spinlock. So the main part of this change is
connected with the debugfs nodes descriptors initialization macros, which
aside with already defined prototypes now require to have the DW eDMA
private data pointer passed.
[bhelgaas: squash in https://lore.kernel.org/r/20230130185101.2883245-1-arnd@kernel.org]
Link: https://lore.kernel.org/r/20230113171409.30470-17-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of "oneOf:" choices, use "allOf:" and "if:" to define reg, clocks,
resets, and their names that can be taken by the compatible string.
The order of their names doesn't change here.
Link: https://lore.kernel.org/r/20221223070713.20549-2-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
pci_bridge_wait_for_secondary_bus() is called after a Secondary Bus
Reset, but not after a DPC-induced Hot Reset.
As a result, the delays prescribed by PCIe r6.0 sec 6.6.1 are not
observed and devices on the secondary bus may be accessed before
they're ready.
One affected device is Intel's Ponte Vecchio HPC GPU. It comprises a
PCIe switch whose upstream port is not immediately ready after reset.
Because its config space is restored too early, it remains in
D0uninitialized, its subordinate devices remain inaccessible and DPC
recovery fails with messages such as:
i915 0000:8c:00.0: can't change power state from D3cold to D0 (config space inaccessible)
intel_vsec 0000:8e:00.1: can't change power state from D3cold to D0 (config space inaccessible)
pcieport 0000:89:02.0: AER: device recovery failed
Fix it.
Link: https://lore.kernel.org/r/9f5ff00e1593d8d9a4b452398b98aa14d23fca11.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
|
|
People are reporting that pci-mvebu.c driver does not work with recent
mainline kernel. There are more bugs which prevents its for daily usage.
So lets mark it as broken for now, until somebody would be able to fix it
in mainline kernel.
Link: https://lore.kernel.org/r/20230114164125.1298-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
Sheng Bi reports that pci_bridge_secondary_bus_reset() may fail to wait
for devices on the secondary bus to become accessible after reset:
Although it does call pci_dev_wait(), it erroneously passes the bridge's
pci_dev rather than that of a child. The bridge of course is always
accessible while its secondary bus is reset, so pci_dev_wait() returns
immediately.
Sheng Bi proposes introducing a new pci_bridge_secondary_bus_wait()
function which is called from pci_bridge_secondary_bus_reset():
https://lore.kernel.org/linux-pci/20220523171517.32407-1-windy.bi.enflame@gmail.com/
However we already have pci_bridge_wait_for_secondary_bus() which does
almost exactly what we need. So far it's only called on resume from
D3cold (which implies a Fundamental Reset per PCIe r6.0 sec 5.8).
Re-using it for Secondary Bus Resets is a leaner and more rational
approach than introducing a new function.
That only requires a few minor tweaks:
- Amend pci_bridge_wait_for_secondary_bus() to await accessibility of
the first device on the secondary bus by calling pci_dev_wait() after
performing the prescribed delays. pci_dev_wait() needs two parameters,
a reset reason and a timeout, which callers must now pass to
pci_bridge_wait_for_secondary_bus(). The timeout is 1 sec for resume
(PCIe r6.0 sec 6.6.1) and 60 sec for reset (commit 821cdad5c46c ("PCI:
Wait up to 60 seconds for device to become ready after FLR")).
Introduce a PCI_RESET_WAIT macro for the 1 sec timeout.
- Amend pci_bridge_wait_for_secondary_bus() to return 0 on success or
-ENOTTY on error for consumption by pci_bridge_secondary_bus_reset().
- Drop an unnecessary 1 sec delay from pci_reset_secondary_bus() which
is now performed by pci_bridge_wait_for_secondary_bus(). A static
delay this long is only necessary for Conventional PCI, so modern
PCIe systems benefit from shorter reset times as a side effect.
Fixes: 6b2f1351af56 ("PCI: Wait for device to become ready after secondary bus reset")
Link: https://lore.kernel.org/r/da77c92796b99ec568bd070cbe4725074a117038.1673769517.git.lukas@wunner.de
Reported-by: Sheng Bi <windy.bi.enflame@gmail.com>
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v4.17+
|
|
If a PCI bridge is suspended to D3cold upon entering system sleep,
resuming it entails a Fundamental Reset per PCIe r6.0 sec 5.8.
The delay prescribed after a Fundamental Reset in PCIe r6.0 sec 6.6.1
is sought to be observed by:
pci_pm_resume_noirq()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
However, pci_bridge_wait_for_secondary_bus() bails out if the bridge_d3
flag is not set. That flag indicates whether a bridge is allowed to
suspend to D3cold at *runtime*.
Hence *no* delay is observed on resume from system sleep if runtime
D3cold is forbidden. That doesn't make any sense, so drop the bridge_d3
check from pci_bridge_wait_for_secondary_bus().
The purpose of the bridge_d3 check was probably to avoid delays if a
bridge remained in D0 during suspend. However the sole caller of
pci_bridge_wait_for_secondary_bus(), pci_pm_bridge_power_up_actions(),
is only invoked if the previous power state was D3cold. Hence the
additional bridge_d3 check seems superfluous.
Fixes: ad9001f2f411 ("PCI/PM: Add missing link delays required by the PCIe spec")
Link: https://lore.kernel.org/r/eb37fa345285ec8bacabbf06b020b803f77bdd3d.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v5.5+
|
|
Previously we distributed spare resources only upon hot-add, so if the
initial root bus scan found devices that had not been fully configured by
the BIOS, we allocated only enough resources to cover what was then
present. If some of those devices were hotplug bridges, we did not leave
any additional resource space for future expansion.
Distribute the available resources for root buses, too, to make this work
the same way as the normal hotplug case.
A previous commit to do this was reverted due to a regression reported by
Jonathan Cameron:
e96e27fc6f79 ("PCI: Distribute available resources for root buses, too")
5632e2beaf9d ("Revert "PCI: Distribute available resources for root buses, too"")
This commit changes pci_bridge_resources_not_assigned() to work with
bridges that do not have all the resource windows programmed by the boot
firmware (previously we expected all I/O, memory and prefetchable memory
were programmed).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000
Link: https://lore.kernel.org/r/20220905080232.36087-5-mika.westerberg@linux.intel.com
Link: https://lore.kernel.org/r/20230131092405.29121-4-mika.westerberg@linux.intel.com
Reported-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
A PCI bridge may reside on a bus with other devices as well. The resource
distribution code does not take this into account and therefore it expands
the bridge resource windows too much, not leaving space for the other
devices (or functions of a multifunction device). This leads to an issue
that Jonathan reported when running QEMU with the following topology (QEMU
parameters):
-device pcie-root-port,port=0,id=root_port13,chassis=0,slot=2 \
-device x3130-upstream,id=sw1,bus=root_port13,multifunction=on \
-device e1000,bus=root_port13,addr=0.1 \
-device xio3130-downstream,id=fun1,bus=sw1,chassis=0,slot=3 \
-device e1000,bus=fun1
The first e1000 NIC here is another function in the switch upstream port.
This leads to following errors:
pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04]
pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04]
pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000]
e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]
Fix this by taking into account bridge windows, device BARs and SR-IOV PF
BARs on the bus (PF BARs include space for VF BARS so only account PF
BARs), including the ones belonging to bridges themselves if it has any.
Link: https://lore.kernel.org/linux-pci/20221014124553.0000696f@huawei.com/
Link: https://lore.kernel.org/linux-pci/6053736d-1923-41e7-def9-7585ce1772d9@ixsystems.com/
Link: https://lore.kernel.org/r/20230131092405.29121-3-mika.westerberg@linux.intel.com
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: Alexander Motin <mav@ixsystems.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After division the extra resource space per hotplug bridge may not be
aligned according to the window alignment, so align it before passing it
down for further distribution.
Link: https://lore.kernel.org/r/20230131092405.29121-2-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need
to delay phy port initialization after calling the mt7621_pcie_init_port()
driver function to get into reliable boots for both warm and hard resets.
The delay required to detect the ports seems to be in the range [75-100]
milliseconds.
If the ports are not detected the controller is not functional.
There is no datasheet or something similar to really understand why this
extra delay is needed only for these devices and it is not for most of
the boards that are built on mt7621 SoC.
This issue has been reported by openWRT community and the complete
discussion is in [0]. The 100 milliseconds delay has been tested in all
devices to validate it.
Add the extra 100 milliseconds delay to fix the issue.
[0]: https://github.com/openwrt/openwrt/pull/11220
Link: https://lore.kernel.org/r/20221231074041.264738-1-sergio.paracuellos@gmail.com
Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
PCIe ports reserved for VMD use are not visible to BIOS and therefore not
configured to enable PCIe ASPM or LTR values (which BIOS will configure if
they are not set). Lack of this programming results in high power
consumption on laptops as reported in bugzilla. For affected products use
pci_enable_link_state to set the allowed link states for devices on the
root ports. Also set the LTR value to the maximum value needed for the SoC.
This is a workaround for products from Rocket Lake through Alder Lake.
Raptor Lake, the latest product at this time, has already implemented LTR
configuring in BIOS. Future products will move ASPM configuration back to
BIOS as well. As this solution is intended for laptops, support is not
added for hotplug or for devices downstream of a switch on the root port.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212355
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215063
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213717
Link: https://lore.kernel.org/r/20230120031522.2304439-5-david.e.box@linux.intel.com
Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
Simplify the device ID list by creating a grouping of features shared by
client products.
Suggested-by: Jon Derrick <jonathan.derrick@linux.dev>
Link: https://lore.kernel.org/r/20230120031522.2304439-4-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
Use PCI_VDEVICE to simplify the device table.
Link: https://lore.kernel.org/r/20230120031522.2304439-3-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
Add pci_enable_link_state() to allow devices to change the default BIOS
configured states. Clears the BIOS default settings then sets the new
states and reconfigures the link under the semaphore. Also add
PCIE_LINK_STATE_ALL macro for convenience for callers that want to enable
all link states.
Link: https://lore.kernel.org/r/20230120031522.2304439-2-david.e.box@linux.intel.com
Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Except for isochronous-configured devices, software may set
Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a
read request with size greater than the completer's Max_Payload_Size (MPS),
the completer is required to break the response into multiple completions.
Instead of correctly responding with multiple completions to a large read
request, some LS7A Root Ports respond with a Completer Abort. To prevent
this, the MRRS must be limited to an implementation-specific value.
The OS cannot detect that value, so rely on BIOS to configure MRRS before
booting, and quirk the Root Ports so we never set an MRRS larger than that
BIOS value for any downstream device.
N.B. Hot-added devices are not configured by BIOS, and they power up with
MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the
LS7A limit is smaller, those hot-added devices may not work correctly, but
per [1], hotplug is not supported with this chipset revision.
[1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn
[bhelgaas: commit log]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884
Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
we observe hangs during poweroff/reboot on systems with LS7A chipset.
This happens because the portdrv .shutdown() method (pcie_portdrv_remove())
clears PCI_COMMAND_MASTER via pci_disable_device(), which prevents bridges
from forwarding memory or I/O Requests in the upstream direction (PCIe
r6.0, sec 7.5.1.1.3).
LS7A Root Ports have a hardware defect: clearing PCI_COMMAND_MASTER *also*
prevents the bridge from forwarding CPU MMIO requests in the downstream
direction, and these MMIO accesses to devices below the bridge happen even
after .shutdown(), e.g., to print console messages. LS7A neither forwards
the requests nor sends an unsuccessful completion to the CPU, so the CPU
waits forever, resulting in the hang.
The purpose of .shutdown() is to disable interrupts and DMA from the
device. PCIe ports may generate interrupts (either MSI/MSI-X or INTx) for
AER, DPC, PME, hotplug, etc., but they never perform DMA except MSI/MSI-X.
Clearing PCI_COMMAND_MASTER effectively disables MSI/MSI-X, but not INTx.
The port service driver .remove() methods clear the interrupt enables in
PCI_ERR_ROOT_COMMAND, PCI_EXP_DPC_CTL, PCI_EXP_SLTCTL, and PCI_EXP_RTCTL,
etc., which disables interrupts regardless of whether they are MSI/MSI-X or
INTx.
Add a pcie_portdrv_shutdown() method that calls all the port service driver
.remove() methods to clear the interrupt enables for each service but does
not clear Bus Mastering on the port itself.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230201043018.778499-2-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
PCI passthrough to VMs does not work with AMD FCH AHCI adapters: the guest
OS fails to correctly probe devices attached to the controller due to FIS
communication failures:
ata4: softreset failed (1st FIS failed)
...
ata4.00: qc timeout after 5000 msecs (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Forcing the "bus" reset method before unbinding & binding the adapter to
the vfio-pci driver solves this issue, e.g.:
echo "bus" > /sys/bus/pci/devices/<ID>/reset_method
gives a working guest OS, indicating that the default FLR reset method
doesn't work correctly.
Apply quirk_no_flr() to AMD FCH AHCI devices to work around this issue.
Link: https://lore.kernel.org/r/20230128013951.523247-1-damien.lemoal@opensource.wdc.com
Reported-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
DW eDMA v4.70a and older have the read and write channels context CSRs
indirectly accessible, which means CSRs like Channel Control, Xfer size,
SAR, DAR and LLP address are accessed at a fixed MMIO address, with their
reference to the corresponding channel determined by the Viewport CSR. To
have a coherent access to these registers the CSR IOs are supposed to be
protected with a spinlock. DW eDMA v4.80a and newer normally have unrolled
Read/Write channel context registers, with these CSRs directly mapped in
the controller MMIO space.
Both normal and viewport-based registers are exposed via debugfs nodes, and
the original algorithm was based on the unrolled CSRs mapping and
recalculated the viewport addresses when required. This is unscalable (it
only supports a platform with a single eDMA since a base address is
statically preserved) and also needlessly overcomplicated (it loops over
all Rd/Wr context addresses and recalculates the viewport base address on
each debugfs node access).
Simplify the algorithm by adding the channel ID and its direction fields in
the eDMA debugfs node descriptor. These new fields can be used to find a
CSR offset in the channel register space. The DW eDMA debugfs node getter
will also use them to activate the respective context CSRs viewport before
reading data from the specified register. For the unrolled CSR mapping, no
spinlock or viewport activation is needed.
Note: this replaces some REGISTER() uses with CTX_REGISTER(), which avoids
an implicit dependency on a local variable name. The same problem with the
rest of the macro will be fixed in the next commit.
Link: https://lore.kernel.org/r/20230113171409.30470-16-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Since we are about to add the eDMA channels direction support to the
debugfs module it will be confusing to have both the debugfs directory and
the channels direction short names used in the same code.
Rename the debugfs dentry 'dir' variables to 'dent' to prevent confusion.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230113171409.30470-15-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently DW eDMA debugfs node descriptors are allocated on the stack,
which won't work for multi-eDMA platforms. As a preparation to supporting
multi-eDMA systems, allocate each debugfs node separately. Afterwards
we'll add info like Read/Write channel flag, channel ID, DW eDMA private
data reference.
Note: this conversion is mainly required due to having the legacy DW eDMA
controllers with indirect Read/Write channels context CSRs access. If we
didn't need to synchronize access to these registers, the debugfs code of
the driver would have been much simpler.
Link: https://lore.kernel.org/r/20230113171409.30470-14-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Other local names include a "dw_edma" prefix.
Add a "dw_edma" prefix to the debugfs_entries structure, too, so it won't
be confused with global debugfs things.
Link: https://lore.kernel.org/r/20230113171409.30470-13-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The debugfs_create_*() functions never return NULL, so checking their
return value for NULL is pointless. Secondly, the debugfs subsystem is
designed to be as simple as possible, so if one of the debugfs_create_*()
method in a hierarchy fails, the following methods should silently return
the passed erroneous parental dentry. Finally, the code should work no
matter whether anything debugfs-related fails.
To make code simpler and debugfs-independent, stop checking the
debugfs_create_*() return values.
If the debugfs file system is unavailable, skip the debugfs node
initialization altogether to preserve some memory space.
Link: https://lore.kernel.org/r/20230113171409.30470-12-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The debugfs_entries structure declared in dw-edma-v0-debugfs.c contains the
debugfs node register address. The address is declared as dma_addr_t type,
but is cast to "void *".
Change the type to "void __iomem *" and drop the unnecessary casts.
Link: https://lore.kernel.org/r/20230113171409.30470-11-Sergey.Semin@baikalelectronics.ru
Fixes: 305aebeff879 ("dmaengine: Add Synopsys eDMA IP version 0 debugfs support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The DMA engine core manages dma_device.chancnt itself, e.g., in
dma_async_device_register(). DMA device drivers should not initialize
chancnt because it causes the wrong number of channels printed in the
device summary.
Drop the dw-edma chancnt initialization.
Link: https://lore.kernel.org/r/20230113171409.30470-10-Sergey.Semin@baikalelectronics.ru
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The Synopsys PCIe Endpoint IP prototype kit can be attached via any PCI
host controller, including one where the PCI bus address space is different
from the CPU address space. Therefore, we need to make sure the source and
destination addresses of the DMA slave devices are converted to the PCI bus
address space; otherwise DMA transactions may cause memory corruption.
Add a new dw_edma_pcie_address() interface to perform this translation by
using pcibios_resource_to_bus().
Link: https://lore.kernel.org/r/20230113171409.30470-9-Sergey.Semin@baikalelectronics.ru
Fixes: 41aaff2a2ac0 ("dmaengine: Add Synopsys eDMA IP PCIe glue-logic")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Since 9575632052ba ("dmaengine: make slave address physical"), the source
and destination addresses of the DMA slave device have been converted to
physical addresses in the CPU address space. It's the DMA device driver's
responsibility to convert them to the DMA bus address space. In case of the
DW eDMA device, the source or destination peripheral (slave) devices reside
in PCI bus space. Thus we need to perform the PCI Host/Endpoint windows-
based (i.e. DT "ranges" property) address translation; otherwise the eDMA
transactions won't work as expected (or can be even harmful) if the CPU and
PCI address spaces don't match.
Note 1: Even though the DMA interleaved template has both source and
destination addresses declared as dma_addr_t, only the CPU memory range
should be mapped to be seen by the DMA device since it's a subject of the
DMA getting towards the system side. The device part must not be mapped
since the slave device resides in the PCI bus space, which isn't affected
by IOMMUs or iATU translations. DW PCIe eDMA generates corresponding
MWr/MRd TLPs on its own.
Note 2: This functionality is mainly required for the remote eDMA setup
since the CPU address must be manually translated into the PCI bus space
before being written to LLI.{SAR,DAR}. If eDMA is embedded in the locally
accessible DW PCIe Root Port/Endpoint, software-based translation isn't
required since hardware will translate it via the Outbound iATU as long as
the DMA_BYPASS flag is cleared. If DMA_BYPASS is set or there is no
Outbound iATU entry that contains the SAR or DAR (for Read and Write
channel respectively), there won't be any translation performed but DMA
will proceed with the corresponding source/destination address as-is.
Link: https://lore.kernel.org/r/20230113171409.30470-8-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The interleaved DMA transfer support added by 85e7518f42c8 ("dmaengine:
dw-edma: Add device_prep_interleave_dma() support") seems contradictory to
what the DMA engine defines. The next conditional statements:
if (!xfer->xfer.il->numf)
return NULL;
if (xfer->xfer.il->numf > 0 && xfer->xfer.il->frame_size > 0)
return NULL;
mean that numf can't be zero and frame_size must always be zero, otherwise
the transfer won't be executed. Furthermore, the transfer execution method
takes the frame size from the dma_interleaved_template.sgl[] array for each
frame. That array in accordance with [1] is supposed to be of
dma_interleaved_template.frame_size size, which as we discovered before the
code expects to be zero. So judging by the dw_edma_device_transfer()
implementation, the method implies the dma_interleaved_template.sgl[] array
being of dma_interleaved_template.numf size, which is wrong. Since the
dw_edma_device_transfer() method doesn't permit
dma_interleaved_template.frame_size being non-zero, the multi-chunk
interleaved transfer turns to be unsupported even though the code implies
having it supported.
Add fully functioning support of interleaved DMA transfers.
First of all, dma_interleaved_template.frame_size is supposed to be greater
or equal to one thus having at least simple linear chunked frames.
Secondly, we can create a walk-through over all the chunks and frames by
initializing the number of the eDMA burst transactions as a multiple of
dma_interleaved_template.numf and dma_interleaved_template.frame_size and
getting the frame_size-modulo of the iteration step as an index of the
dma_interleaved_template.sgl[] array.
[1] include/linux/dmaengine.h: doc struct dma_interleaved_template
Link: https://lore.kernel.org/r/20230113171409.30470-7-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42c8 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The DW eDMA controller always increments both source and destination
addresses. Permitting DMA interleaved transfers with no src_inc/dst_inc
flags set may lead to unexpected behaviour for the device users.
Terminate interleaved transfers if at least one of the
dma_interleaved_template.{src_inc,dst_inc} flag is initialized to "false".
Note that in addition, we need to increase the source and destination
addresses after each iteration.
Link: https://lore.kernel.org/r/20230113171409.30470-6-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42c8 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Interleaved DMA transfer support was added by 85e7518f42c8 ("dmaengine:
dw-edma: Add device_prep_interleave_dma() support"), but depending on the
selected channel, either source or destination address are left
uninitialized which was obviously wrong.
Initialize the destination address of the eDMA burst descriptors for
DEV_TO_MEM interleaved operations and the source address for MEM_TO_DEV
operations.
Link: https://lore.kernel.org/r/20230113171409.30470-5-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42c8 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The dw_edma_region.paddr field should be a memory base address visible by
the DW eDMA controller. If the DMA engine is embedded in the DW PCIe
Host/Endpoint controller, the address should belong to the Local CPU/
Application memory. If eDMA is remotely accessible across the PCI bus via
PCI memory IOs, the address should be part of the PCI bus memory space.
The latter case hasn't been well covered in the corresponding glue-driver.
Since pci_dev.resource[] contains resources defined in the CPU memory
space, they need to be converted to the PCI bus address space. Convert the
LL, DT and CSRs PCI memory ranges with pci_bus_address().
In addition, extend the dw_edma_region.paddr field size. The field normally
contains a memory range base address to be set in the DW eDMA Linked-List
pointer register or as a base address of the Linked-List data buffer. In
accordance with [1] the LL range is supposed to be created in the Local
CPU/Application memory, but depending on the DW eDMA utilization the memory
can be created as a part of the PCI bus address space (as in the case of
the DW PCIe Endpoint prototype kit).
In the former case dw_edma_region.paddr should be a dma_addr_t, while in
the latter one it should be a pci_bus_addr_t. Since the corresponding CSRs
are always 64 bits wide, convert dw_edma_region.paddr to be u64, and let
the client make sure it has a valid address visible by the DW eDMA
controller. For instance, the DW eDMA PCIe glue-driver initializes the
field with addresses from the PCI bus memory space.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
v.5.40a, March 2019, p.1103
Link: https://lore.kernel.org/r/20230113171409.30470-4-Sergey.Semin@baikalelectronics.ru
Fixes: 41aaff2a2ac0 ("dmaengine: Add Synopsys eDMA IP PCIe glue-logic")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
If dw_edma_irq_request() fails to initialize an IRQ handler, any previously
requested IRQs will be left initialized.
Release the previously requested IRQs in the cleanup-on-error path of
dw_edma_irq_request().
Link: https://lore.kernel.org/r/20230113171409.30470-3-Sergey.Semin@baikalelectronics.ru
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The dst_addr member of the dma_slave_config structure has been mistakenly
marked as ignored if the *source* address belongs to the memory. That is
relevant to the src_addr field of the structure, while the dst_addr field
contains a destination device address that should be ignored if the
destination is the CPU memory.
Correct the @dst_addr description accordingly.
Link: https://lore.kernel.org/r/20230113171409.30470-2-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The following bits in the PCIe Device Control register enable sending of
ERR_COR, ERR_NONFATAL, or ERR_FATAL Messages (or reporting internally in
the case of Root Ports):
Correctable Error Reporting Enable
Non-Fatal Error Reporting Enable
Fatal Error Reporting Enable
Unsupported Request Reporting Enable
These enable bits are set by pci_enable_pcie_error_reporting(), and since
f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), we
do that in this path during enumeration:
pci_init_capabilities
pci_aer_init
pci_enable_pcie_error_reporting
Previously, the AER service driver also traversed the hierarchy when
claiming a Root Port, enabling error reporting for downstream devices, but
this is redundant.
Remove the code that enables this error reporting in the AER .probe() path.
Also remove similar code that disables error reporting in the AER .remove()
path.
Note that these Device Control Reporting Enable bits do not control
interrupt generation. That's done by the similarly-named bits in the AER
Root Error Command register, which are still set by aer_probe() and cleared
by aer_remove(), since the AER service driver handles those interrupts.
See PCIe r6.0, sec 6.2.6.
Link: https://lore.kernel.org/r/20230118234612.272916-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Keith Busch <kbusch@kernel.org>
|
|
8e4bfbe644a6 ("PCI: endpoint: pci-epf-vntb: fix error handle in
epf_ntb_mw_bar_init()") added a "num_mws" parameter to
epf_ntb_mw_bar_clear() but failed to add kernel-doc for num_mws.
Add kernel-doc for num_mws on epf_ntb_mw_bar_clear().
Fixes: 8e4bfbe644a6 ("PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()")
Link: https://lore.kernel.org/r/20230103024907.293853-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Prepare for extending compatible list by adding oneOf keyword. No
functional changes.
Link: https://lore.kernel.org/r/20230106081203.14118-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
switchtec_dev_read() didn't handle copy_to_user() errors correctly: it
assigned "rc = -EFAULT", but actually returned either "size", -ENXIO, or
-EBADMSG instead.
Update the failure cases to unlock mrpc_mutex and return -EFAULT directly.
Link: https://lore.kernel.org/r/20221216162126.207863-3-helgaas@kernel.org
Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
|
|
The "ret" variable in switchtec_dma_mrpc_isr() is superfluous. Remove it
and just return the value. No functional change intended.
Link: https://lore.kernel.org/r/20221216162126.207863-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
|
|
The sysfs link name "virtfn%u" constructed by pci_iov_sysfs_link() requires
17 bytes to contain the longest possible string. Increase VIRTFN_ID_LEN to
accommodate that.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[bhelgaas: commit log, comment at #define]
Fixes: dd7cc44d0bce ("PCI: add SR-IOV API for Physical Function driver")
Link: https://lore.kernel.org/r/20221218033347.23743-1-gremlin@altlinux.org
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
This beginning comment is not kernel-doc, so change the "/**" to a
normal "/*" comment to prevent a kernel-doc warning:
drivers/misc/pci_endpoint_test.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Link: https://lore.kernel.org/r/20230113063937.20912-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Cc: linux-pci@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the i.MX8MP PCIe EP support.
Link: https://lore.kernel.org/r/1673847684-31893-15-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
Add i.MX8MM PCIe EP support.
Link: https://lore.kernel.org/r/1673847684-31893-14-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
Add i.MX8MQ PCIe EP support.
Link: https://lore.kernel.org/r/1673847684-31893-13-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
i.MX PCIe is one dual mode PCIe controller.
Add i.MX PCIe EP mode support here, and split the PCIe modes to the Root
Complex mode and Endpoint mode.
Link: https://lore.kernel.org/r/1673847684-31893-12-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
