| Age | Commit message (Collapse) | Author |
|---|
|
- Drop bogus kernel-doc marker in pci_endpoint_test.c (Randy Dunlap)
- Fix epf_ntb_mw_bar_clear() kernel-doc (Yang Yingliang)
- Constify struct kobj_type pci_slot_ktype (Thomas Weißschuh)
* pci/misc:
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc
misc: pci_endpoint_test: Drop initial kernel-doc marker
|
|
- Add pci_enable_link_state() to allow drivers to enable ASPM link state
(Michael Bottini)
- Add quirk to enable all ASPM link states and program LTR for devices
below VMD (David E. Box)
* pci/controller/vmd:
PCI: vmd: Add quirk to configure PCIe ASPM and LTR
PCI: vmd: Create feature grouping for client products
PCI: vmd: Use PCI_VDEVICE in device list
PCI/ASPM: Add pci_enable_link_state()
|
|
- Clean up uniphier-ep reg, clocks, resets, and their names (Kunihiko
Hayashi)
* pci/controller/uniphier:
dt-bindings: PCI: uniphier-ep: Clean up reg, clocks, resets, and their names
|
|
- Return -EFAULT instead of unrelated codes for copy_to_user() errors
(Bjorn Helgaas)
* pci/controller/switchtec:
PCI: switchtec: Return -EFAULT for copy_to_user() errors
PCI: switchtec: Simplify switchtec_dma_mrpc_isr()
|
|
- Add DT compatible for qcom MSM8998 (Krzysztof Kozlowski)
- Unify qcom MSM8996 and MSM8998 clock orderings (Krzysztof Kozlowski)
- Correct qcom,perst-regs (Krzysztof Kozlowski)
- Add qcom SM8350 DT binding and driver support (Dmitry Baryshkov)
- Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and
clocks are disabled on late host-init errors (Johan Hovold)
- Add IPQ8074 Gen3 port DT binding and driver support (the Gen2 port was
already supported) (Robert Marko)
* pci/controller/qcom:
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
dt-bindings: PCI: qcom: Add MSM8998 specific compatible
dt-bindings: PCI: qcom: Add oneOf to compatible match
|
|
- Mark mvebu driver as broken (Pali Rohár)
* pci/controller/mvebu:
PCI: mvebu: Mark driver as BROKEN
|
|
- Delay PHY initialization to make boots reliable for ZBT WE1326 and ZBT
WF3526-P and some Netgear models (Sergio Paracuellos)
* pci/controller/mt7621:
PCI: mt7621: Delay phy ports initialization
|
|
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support
(Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Add i.MX8MP PCIe EP support
PCI: imx6: Add i.MX8MM PCIe EP support
PCI: imx6: Add i.MX8MQ PCIe EP support
PCI: imx6: Add i.MX PCIe EP mode support
misc: pci_endpoint_test: Add i.MX8 PCIe EP device support
dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode compatible string
dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode compatible string
dt-bindings: imx6q-pcie: Add i.MX8MM PCIe EP mode compatible string
|
|
- Release previously-requested DW eDMA IRQs if request_irq() fails (Serge
Semin)
- Convert DW eDMA linked-list (ll) and data target (dt) from CPU-relative
addresses to PCI bus addresses (Serge Semin)
- Fix missing src/dst address for interleaved transfers (Serge Semin)
- Enforce the DW eDMA restriction that interleaved transfers must increment
src and dst addresses (Serge Semin)
- Fix some invalid interleaved transfer semantics (Serge Semin)
- Convert CPU-relative addresses to PCI bus addresses for eDMA engine
(Serge Semin)
- Drop chancnt initialization from dw-edma-core, since it is managed by the
dmaengine core, e.g., in dma_async_device_channel_register() (Serge Semin)
- Clean up bogus casting of debugfs_entries.reg addresses (Serge Semin)
- Ignore debugfs file/directory creation errors (Serge Semin)
- Allocate debugfs entries from the heap to prepare for multi-eDMA
platforms (Serge Semin)
- Simplify and rework register accessors to remove another obstacle to
multi-eDMA platforms (Serge Semin)
- Consolidate eDMA read/write channels in a single dma_device to simplify,
better reflect the hardware design, and avoid a debugfs complaint (Serge
Semin)
- Move eDMA-specific debugfs nodes into existing dmaengine subdirectory
(Serge Semin)
- Fix a readq_ch() truncation from 64 to 32 bits (Serge Semin)
- Use existing readq()/writeq rather than hand-coding new ones (Serge
Semin)
- Drop unnecessary data target region allocation in favor of existing
dw_edma_chip members (Serge Semin)
- Use parent device in eDMA controller name to prepare for multi-eDMA
platforms (Serge Semin)
- In addition to the existing MMIO accessors for linked list entries, add
support for ioremapped entries for use by eDMA in Root Ports or local
Endpoints (Serge Semin)
- Convert DW_EDMA_PCIE so it depends on DW_EDMA instead of selecting it
(Serge Semin)
- Allow DWC drivers to set streaming DMA masks larger than 32 bits;
previously both streaming and coherent DMA were limited to 32 bits
because some PCI devices only support coherent 32-bit DMA for MSI (Serge
Semin)
- Set 64-bit streaming and coherent DMA mask for the bt1 driver (Serge
Semin)
- Add DW Root Port and Endpoint controller support for eDMA (Serge Semin)
* pci/controller/dwc:
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
dmaengine: dw-edma: Skip cleanup procedure if no private data found
dmaengine: dw-edma: Replace chip ID number with device name
dmaengine: dw-edma: Drop DT-region allocation
dmaengine: dw-edma: Use non-atomic io-64 methods
dmaengine: dw-edma: Fix readq_ch() return value truncation
dmaengine: dw-edma: Use DMA engine device debugfs subdirectory
dmaengine: dw-edma: Join read/write channels into a single device
dmaengine: dw-edma: Move eDMA data pointer to debugfs node descriptor
dmaengine: dw-edma: Simplify debugfs context CSRs init procedure
dmaengine: dw-edma: Rename debugfs dentry variables to 'dent'
dmaengine: dw-edma: Convert debugfs descs to being heap-allocated
dmaengine: dw-edma: Add dw_edma prefix to debugfs nodes descriptor
dmaengine: dw-edma: Stop checking debugfs_create_*() return value
dmaengine: dw-edma: Drop unnecessary debugfs reg casts
dmaengine: dw-edma: Drop chancnt initialization
dmaengine: dw-edma: Add PCI bus address getter to the remote EP glue driver
dmaengine: dw-edma: Add CPU to PCI bus address translation
dmaengine: dw-edma: Fix invalid interleaved xfers semantics
dmaengine: dw-edma: Don't permit non-inc interleaved xfers
dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers
dmaengine: dw-edma: Convert ll/dt phys address to PCI bus/DMA address
dmaengine: dw-edma: Release requested IRQs on failure
dmaengine: Fix dma_slave_config.dst_addr description
|
|
- Convert dra7xx to threaded IRQ handler (Manivannan Sadhasivam)
- Move tegra194 dw_pcie_ep_linkup() to threaded IRQ handler (Manivannan
Sadhasivam)
- Add a separate lock for the endpoint pci_epf list to avoid deadlock
while running callbacks (Manivannan Sadhasivam)
- Use callbacks instead of notifier chains to signal events from EPC to EPF
drivers (Manivannan Sadhasivam)
- Use link_up() callback in place of LINK_UP notifier (Manivannan
Sadhasivam)
* pci/endpoint:
PCI: endpoint: Use link_up() callback in place of LINK_UP notifier
PCI: endpoint: Use callback mechanism for passing events from EPC to EPF
PCI: endpoint: Use a separate lock for protecting epc->pci_epf list
PCI: tegra194: Move dw_pcie_ep_linkup() to threaded IRQ handler
PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ
|
|
- Avoid FLR for AMD FCH AHCI adapters to avoid a hardware defect (Damien Le
Moal)
- Add ACS quirk for Wangxun NICs that don't allow peer-to-peer between
functions, but don't advertise an ACS Capability (Mengyuan Lou)
* pci/virtualization:
PCI: Add ACS quirk for Wangxun NICs
PCI: Avoid FLR for AMD FCH AHCI adapters
|
|
- Realign space as required by bridge windows after dividing it up (Mika
Westerberg)
- Account for space required by other devices on the bus before
distributing it all to bridges (Mika Westerberg)
- Distribute spare resources to root bus devices as well as to other
hotplug bridges (Mika Westerberg)
- Fix bug that dropped root bus resources that end at zero, e.g., a host
bridge that leads only to bus 00 (Geert Uytterhoeven)
* pci/resource:
PCI: Fix dropping valid root bus resources with .end = zero
PCI: Distribute available resources for root buses, too
PCI: Take other bus devices into account when distributing resources
PCI: Align extra resources for hotplug bridges properly
|
|
- Always observe reset delay when waking devices from D3cold, e.g., after
system sleep, regardless of whether we're allowed to runtime-suspend to
D3cold (Lukas Wunner)
- Unify reset and resume delays to wait for downstream devices after a
bridge reset (Lukas Wunner)
- Wait for downstream devices after a DPC-induced bridge reset (Lukas
Wunner)
* pci/reset:
PCI/DPC: Await readiness of secondary bus after reset
PCI: Unify delay handling for reset and resume
PCI/PM: Observe reset delay irrespective of bridge_d3
|
|
- Account for _S0W when deciding whether to put bridges in D3 to avoid
missing hotplug events (Rafael J. Wysocki)
* pci/pm:
PCI/ACPI: Account for _S0W of the target bridge in acpi_pci_bridge_d3()
|
|
- Annotate RCU dereference (Logan Gunthorpe)
* pci/p2pdma:
PCI/P2PDMA: Annotate RCU dereference
|
|
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe will complain about them (Nick Alcock)
* pci/kbuild:
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
|
|
- Enlarge virtfn sysfs name buffer to prevent buffer overflow (Alexey V.
Vissarionov)
* pci/iov:
PCI/IOV: Enlarge virtfn sysfs name buffer
|
|
- Add quirk to work around Qualcomm hardware defect in Command Completed
signaling (Manivannan Sadhasivam)
- Remove locking to allow devices to be marked as disconnected immediately
instead of waiting for concurrent bind/unbind to complete (Lukas Wunner)
* pci/hotplug:
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
|
|
- Implement portdrv .shutdown() method that calls service driver .remove()
methods (which disables interrupt generation as required by .shutdown()),
but doesn't disable bus mastering (which hangs on Loongson LS7A because
of a hardware defect) (Huacai Chen)
- Prevent MRRS increases for devices below Loongson LS7A to avoid hardware
limitations (Huacai Chen)
- Ignore devices with a firmware (DT/ACPI) node that says the device is
disabled (Rob Herring)
* pci/enumeration:
PCI: Honor firmware's device disabled status
PCI: loongson: Add more devices that need MRRS quirk
PCI: loongson: Prevent LS7A MRRS increases
PCI/portdrv: Prevent LS7A Bus Master clearing on shutdown
|
|
- Configure ECRC only if AER is native (Vidya Sagar)
- Stop enabling device error reporting for the downstream hierarchy when
the AER service driver probes a Root Port because we've already done that
when enumerating those downstream devices (Bjorn Helgaas)
* pci/aer:
PCI/AER: Remove redundant Device Control Error Reporting Enable
PCI/AER: Configure ECRC only if AER is native
|
|
Since the DW eDMA core now supports eDMA controllers embedded in locally
accessible DW PCIe Root Ports and Endpoints, register these controllers
when possible.
To do that the DW PCIe core driver needs to perform some preparations
first. First of all, it needs to find the eDMA controller CSRs base
address, whether they are accessible over the Port Logic or iATU unrolled
space. Afterwards it can try to auto-detect the eDMA controller
availability and number of read/write channels. If none are found the
procedure silently returns without error.
Secondly, the platform is supposed to provide either combined or
per-channel IRQ signals. If no valid IRQs set is found, the procedure
returns without error to be backward compatible with platforms where DW
PCIe controllers have eDMA but lack the IRQ description.
Finally, before actually probing the eDMA device we need to allocate LLP
items buffers. After that the DW eDMA can be registered. If registration is
successful, a message regarding the number of detected Read/Write eDMA
channels will be printed to the system as is done for the iATU settings.
Note: the DW PCI controller driver (either host or endpoint mode) is
currently always built-in, so if the DW eDMA core is built as a module
(CONFIG_DW_EDMA=m), eDMA controllers will not be registered even if the
dw-edma module is later loaded.
Link: https://lore.kernel.org/r/20230113171409.30470-28-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
The DW PCIe Root Port IP core is synthesized with the 64-bit AXI address
bus. Since the device is also equipped with the eDMA engine, explicitly
set the device DMA mask so DMA engine clients can allocate data buffers
anywhere in the 64-bit memory space.
Link: https://lore.kernel.org/r/20230113171409.30470-27-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The MSI target address must be in the lowest 4GB memory to support PCI
peripherals without 64-bit MSI support. Since the allocation is done from
DMA coherent memory, set only the coherent DMA mask, leaving the streaming
DMA mask alone.
Thus streaming DMA operations will work with no artificial limitations. It
will be specifically useful for the eDMA-capable controllers so the
corresponding DMA engine clients would map the DMA buffers with no need for
SWIOTLB for buffers allocated above 4GB.
Add a brief comment about the reason allocating the MSI target address
below 4GB.
Link: https://lore.kernel.org/r/20230113171409.30470-26-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
|
|
When CONFIG_DW_EDMA=m, dw_edma_probe() is built as a module. Previously
edma.h declared it as extern, but the implementation isn't available for
builtin callers. A subsequent commit will add calls from
dw_pcie_host_init() and dw_pcie_ep_init(), which can only be built-in.
Make it safe for such builtin callers to call dw_edma_probe() by using
IS_REACHABLE() to define a stub when CONFIG_DW_EDMA=m.
When CONFIG_DW_EDMA=m, these builtin callers will fail to detect and
register eDMA devices, so eDMA won't be usable even if the dw-edma module
is loaded.
[bhelgaas: split to separate patch, commit log]
Link: https://lore.kernel.org/r/20230113171409.30470-25-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Kconfig "select" is discouraged for visible symbols like DW_EDMA because it
makes it possible to set DW_EDMA even if DW_EDMA depends on things that are
not set (see Documentation/kbuild/kconfig-language.txt).
Convert DW_EDMA_PCIE so it depends on DW_EDMA instead of selecting it.
There will likely be several future drivers that depend on DW_EDMA, so this
uses "if DW_EDMA" to enclose them all rather than repeating "depends on
DW_EDMA" for each.
[bhelgaas: split to separate patch, commit log]
Link: https://lore.kernel.org/r/20230113171409.30470-25-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently the DW eDMA driver only supports the linked lists memory
allocated locally with respect to the remote eDMA engine setup. It means
the linked lists will be accessible by the CPU via the MMIO space only. If
eDMA is embedded into the DW PCIe Root Ports or local Endpoints (which
support will be added in subsequent commits) the linked lists are supposed
to be allocated in the CPU memory. In that case the LL-entries can be
directly accessed, while the former case implies using the MMIO accessors
for that.
In order to have both cases supported by the driver, the dw_edma_region
descriptor should be fixed to contain the MMIO-backed and just memory-based
virtual addresses. The linked lists initialization procedure will use one
of them depending on the eDMA device nature. If the eDMA engine is embedded
into the local DW PCIe Root Port/Endpoint controllers, the list entries
will be directly accessed by referencing the corresponding structure
fields. Otherwise the MMIO accessors usage will be preserved.
Link: https://lore.kernel.org/r/20230113171409.30470-24-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Since 8b41fc4454e3 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are
used to identify modules. As a consequence, MODULE_LICENSE in non-modules
causes modprobe to misidentify the object file as a module when it is not,
and modprobe might succeed rather than failing with a suitable error
message.
For tristate modules that can be either built-in or loaded at runtime,
modprobe succeeds in both cases:
# modprobe ext4
[exit status zero if CONFIG_EXT4_FS=y or =m]
For boolean modules like the Standard Hot Plug Controller driver (shpchp)
that cannot be loaded at runtime, modprobe should always fail like this:
# modprobe shpchp
modprobe: FATAL: Module shpchp not found in directory /lib/modules/...
[exit status non-zero regardless of CONFIG_HOTPLUG_PCI_SHPC]
but prior to this commit, shpchp_core.c contained MODULE_LICENSE, so
"modprobe shpchp" silently succeeded when it should have failed.
Remove MODULE_LICENSE in files that cannot be built as modules.
[bhelgaas: commit log, squash]
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230216152410.4312-1-nick.alcock@oracle.com/
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
Commit a474d3fbe287 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed
PCI_MSI_IRQ_DOMAIN and made all previous references to it refer to PCI_MSI
instead.
PCI_HYPERV_INTERFACE already depended on PCI_MSI && PCI_MSI_IRQ_DOMAIN, so
we ended up with a redundant dependency on PCI_MSI && PCI_MSI. Drop the
duplicate.
No functional change. Just a stylistic clean-up.
Link: https://lore.kernel.org/r/20221215101310.9135-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
A dereference of the __rcu pointer was noticed by sparse:
drivers/pci/p2pdma.c:199:44: sparse: sparse: dereference of noderef expression
Dereference the __rcu pointer using rcu_dereference_protected() instead of
accessing it directly. It's safe to use rcu_dereference_protected() because
a reference is held on the pgmap's percpu reference counter and thus it
cannot disappear.
Link: https://lore.kernel.org/r/20230209172953.4597-1-logang@deltatee.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the
driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Link: https://lore.kernel.org/r/20230216-kobj_type-pci-v1-1-46a63c8612b5@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
On surprise removal, pciehp_unconfigure_device() and acpiphp's
trim_stale_devices() call pci_dev_set_disconnected() to mark removed
devices as permanently offline. Thereby, the PCI core and drivers know
to skip device accesses.
However pci_dev_set_disconnected() takes the device_lock and thus waits for
a concurrent driver bind or unbind to complete. As a result, the driver's
->probe and ->remove hooks have no chance to learn that the device is gone.
That doesn't make any sense, so drop the device_lock and instead use atomic
xchg() and cmpxchg() operations to update the device state.
As a byproduct, an AB-BA deadlock reported by Anatoli is fixed which occurs
on surprise removal with AER concurrently performing a bus reset.
AER bus reset:
INFO: task irq/26-aerdrv:95 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule
rwsem_down_write_slowpath
down_write_nested
pciehp_reset_slot # acquires reset_lock
pci_reset_hotplug_slot
pci_slot_reset # acquires device_lock
pci_bus_error_reset
aer_root_reset
pcie_do_recovery
aer_process_err_devices
aer_isr
pciehp surprise removal:
INFO: task irq/26-pciehp:96 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule_preempt_disabled
__mutex_lock
mutex_lock_nested
pci_dev_set_disconnected # acquires device_lock
pci_walk_bus
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist # acquires reset_lock
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: a6bd101b8f84 ("PCI: Unify device inaccessible")
Link: https://lore.kernel.org/r/3dc88ea82bdc0e37d9000e413d5ebce481cbd629.1674205689.git.lukas@wunner.de
Reported-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.20+
Cc: Keith Busch <kbusch@kernel.org>
|
|
The Qualcomm PCI bridge device (Device ID 0x010e) found in chipsets such as
SC8280XP used in Lenovo Thinkpad X13s, does not set the Command Completed
bit unless writes to the Slot Command register change "Control" bits.
This results in timeouts like below during boot and resume from suspend:
pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
...
pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x13f1 (issued 107724 msec ago)
Add the device to the Command Completed quirk to mark commands "completed"
immediately unless they change the "Control" bits.
Link: https://lore.kernel.org/r/20230213144922.89982-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported.
Add compatible for Gen3 port which uses the same controller as IPQ6018.
Link: https://lore.kernel.org/r/20230113164449.906002-7-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
IPQ8074 has one Gen2 and one Gen3 PCIe port, with Gen2 already supported.
Document Gen3 port which uses the same controller as IPQ6018.
Link: https://lore.kernel.org/r/20230113164449.906002-6-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Sort the compatibles list alphabetically for maintenance.
Link: https://lore.kernel.org/r/20230113164449.906002-5-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Implement the new host_deinit() callback so that the PHY is powered off
and regulators and clocks are disabled also on late host-init errors.
Link: https://lore.kernel.org/r/20221017114705.8277-2-johan+linaro@kernel.org
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Add support for the PCIe host on Qualcomm SM8350 platform.
Link: https://lore.kernel.org/r/20221118233242.2904088-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings for two PCIe hosts on SM8350 platform. The only difference
between them is in the aggre0 clock, which warrants the oneOf clause for
the clocks properties.
Link: https://lore.kernel.org/r/20221118233242.2904088-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
qcom,perst-regs is an phandle array of one item with a phandle and its
arguments.
Link: https://lore.kernel.org/r/20221109113202.74406-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
MSM8996 and MSM8998 use the same clocks, so use one order to make the
binding simpler.
Link: https://lore.kernel.org/r/20230106081203.14118-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Add new compatible for MSM8998 (compatible with MSM8996) to allow further
customizing if needed and to accurately describe the hardware.
Link: https://lore.kernel.org/r/20230106081203.14118-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Wangxun has verified there is no peer-to-peer between functions for the
below selection of SFxxx, RP1000 and RP2000 NICS. They may be
multi-function devices, but the hardware does not advertise ACS capability.
Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups.
Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
On r8a7791/koelsch:
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xc3a34e00 (size 64):
comm "swapper/0", pid 1, jiffies 4294937460 (age 199.080s)
hex dump (first 32 bytes):
b4 5d 81 f0 b4 5d 81 f0 c0 b0 a2 c3 00 00 00 00 .]...]..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<fe3aa979>] __kmalloc+0xf0/0x140
[<34bd6bc0>] resource_list_create_entry+0x18/0x38
[<767046bc>] pci_add_resource_offset+0x20/0x68
[<b3f3edf2>] devm_of_pci_get_host_bridge_resources.constprop.0+0xb0/0x390
When coalescing two resources for a contiguous aperture, the second
resource is enlarged to cover the full contiguous range, while the first
resource is marked invalid. This invalidation is done by clearing the
flags, start, and end members.
When adding the initial resources to the bus later, invalid resources are
skipped. Unfortunately, the check for an invalid resource considers only
the end member, causing false positives.
E.g. on r8a7791/koelsch, root bus resource 0 ("bus 00") is skipped, and no
longer registered with pci_bus_insert_busn_res() (causing the memory leak),
nor printed:
pci-rcar-gen2 ee090000.pci: host bridge /soc/pci@ee090000 ranges:
pci-rcar-gen2 ee090000.pci: MEM 0x00ee080000..0x00ee08ffff -> 0x00ee080000
pci-rcar-gen2 ee090000.pci: PCI: revision 11
pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
-pci_bus 0000:00: root bus resource [bus 00]
pci_bus 0000:00: root bus resource [mem 0xee080000-0xee08ffff]
Fix this by only skipping resources where all of the flags, start, and end
members are zero.
Fixes: 7c3855c423b17f6c ("PCI: Coalesce host bridge contiguous apertures")
Link: https://lore.kernel.org/r/da0fcd5e86c74239be79c7cb03651c0fce31b515.1676036673.git.geert+renesas@glider.be
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
|
|
As a part of the transition towards callback mechanism for signalling the
events from EPC to EPF, let's use the link_up() callback in the place of
the LINK_UP notifier. This also removes the notifier support completely
from the PCI endpoint framework.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@kernel.org>
|
|
Instead of using the notifiers for passing the events from EPC to EPF,
let's introduce a callback based mechanism where the EPF drivers can
populate relevant callbacks for EPC events they want to subscribe.
The use of notifiers in kernel is not recommended if there is a real link
between the sender and receiver, like in this case. Also, the existing
atomic notifier forces the notification functions to be in atomic context
while the caller may be in non-atomic context. For instance, the two
in-kernel users of the notifiers, pcie-qcom and pcie-tegra194, both are
calling the notifier functions in non-atomic context (from threaded IRQ
handlers). This creates a sleeping in atomic context issue with the
existing EPF_TEST driver that calls the EPC APIs that may sleep.
For all these reasons, let's get rid of the notifier chains and use the
simple callback mechanism for signalling the events from EPC to EPF
drivers. This preserves the context of the caller and avoids the latency
of going through a separate interface for triggering the notifications.
As a first step of the transition, the core_init() callback is introduced
in this commit, that'll replace the existing CORE_INIT notifier used for
signalling the init complete event from EPC.
During the occurrence of the event, EPC will go over the list of EPF
drivers attached to it and will call the core_init() callback if available.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@kernel.org>
|
|
The EPC controller maintains a list of EPF drivers added to it. For
protecting this list against the concurrent accesses, the epc->lock
(used for protecting epc_ops) has been used so far. Since there were
no users trying to use epc_ops and modify the pci_epf list simultaneously,
this was not an issue.
But with the addition of callback mechanism for passing the events, this
will be a problem. Because the pci_epf list needs to be iterated first
for getting hold of the EPF driver and then the relevant event specific
callback needs to be called for the driver.
If the same epc->lock is used, then it will result in a deadlock scenario.
For instance,
...
mutex_lock(&epc->lock);
list_for_each_entry(epf, &epc->pci_epf, list) {
epf->event_ops->core_init(epf);
|
|-> pci_epc_set_bar();
|
|-> mutex_lock(&epc->lock) # DEADLOCK
...
So to fix this issue, use a separate lock called "list_lock" for
protecting the pci_epf list against the concurrent accesses. This lock
will also be used by the callback mechanism.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
dw_pcie_ep_linkup() may take more time to execute depending on the EPF
driver implementation. Calling this API in the hard IRQ handler is not
encouraged since the hard IRQ handlers are supposed to complete quickly.
So move the dw_pcie_ep_linkup() call to threaded IRQ handler.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
|
|
The "dra7xx-pcie-main" hard IRQ handler is just printing the IRQ status
and calling the dw_pcie_ep_linkup() API if LINK_UP status is set. But the
execution of dw_pcie_ep_linkup() depends on the EPF driver and may take
more time depending on the EPF implementation.
In general, hard IRQ handlers are supposed to return quickly and not block
for so long. Moreover, there is no real need of the current IRQ handler to
be a hard IRQ handler. So switch to the threaded IRQ handler for the
"dra7xx-pcie-main" IRQ.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
If a device has a firmware node (DT/ACPI), and the device is marked
disabled, that is currently ignored. Add a check for this condition and
bail out creating the pci_dev.
This assumes the config space for the device can still be accessed because
they already have by this point in order to identify the device.
Link: https://lore.kernel.org/r/20230210164351.2687475-1-robh@kernel.org
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Liu Peibao <liupeibao@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
|
|
Loongson-2K SOC and LS7A2000 chipset add new PCI IDs that need MRRS
quirk. Add them.
Link: https://lore.kernel.org/r/20230211023321.3530080-1-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
