| Age | Commit message (Collapse) | Author |
|---|
|
ib_dma_map_single already
In case of failures either ib_dma_map_single() might not be called yet
or ib_dma_unmap_single() was already called.
We should make sure put_receive_buffer() only calls
ib_dma_unmap_single() if needed.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There's no need to maintain two lists, we can just
have a single list of receive buffers, which are free to use.
It just added unneeded complexity and resulted in
ib_dma_unmap_single() not being called from recv_done()
for empty keepalive packets.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smbd_disconnect_rdma_connection()
We should call ib_dma_unmap_single() and mempool_free() before calling
smbd_disconnect_rdma_connection().
And smbd_disconnect_rdma_connection() needs to be the last function to
call as all other state might already be gone after it returns.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A kernel panic can be triggered by reading /proc/fs/cifs/debug_dirs.
The crash is a null-ptr-deref inside spin_lock(), caused by the use of the
uninitialized global spinlock cifs_tcp_ses_lock.
init_cifs()
└── cifs_proc_init()
└── // User can access /proc/fs/cifs/debug_dirs here
└── cifs_debug_dirs_proc_show()
└── spin_lock(&cifs_tcp_ses_lock); // Uninitialized!
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000000] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] SMP
Modules linked in:
CPU: 3 UID: 0 PID: 16435 Comm: stress-ng-procf Not tainted 6.16.0-10385-g79f14b5d84c6 #37 PREEMPT
Hardware name: QEMU KVM Virtual Machine, BIOS 2025.02-8ubuntu1 06/11/2025
pstate: 23400005 (nzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : do_raw_spin_lock+0x84/0x2cc
lr : _raw_spin_lock+0x24/0x34
sp : ffff8000966477e0
x29: ffff800096647860 x28: ffff800096647b88 x27: ffff0001c0c22070
x26: ffff0003eb2b60c8 x25: ffff0001c0c22018 x24: dfff800000000000
x23: ffff0000f624e000 x22: ffff0003eb2b6020 x21: ffff0000f624e768
x20: 0000000000000004 x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000000 x16: ffff8000804b9600 x15: ffff700012cc8f04
x14: 1ffff00012cc8f04 x13: 0000000000000004 x12: ffffffffffffffff
x11: 1ffff00012cc8f00 x10: ffff80008d9af0d2 x9 : f3f3f304f1f1f1f1
x8 : 0000000000000000 x7 : 7365733c203e6469 x6 : 20656572743c2023
x5 : ffff0000e0ce0044 x4 : ffff80008a4deb6e x3 : ffff8000804b9718
x2 : 0000000000000001 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
do_raw_spin_lock+0x84/0x2cc (P)
_raw_spin_lock+0x24/0x34
cifs_debug_dirs_proc_show+0x1ac/0x4c0
seq_read_iter+0x3b0/0xc28
proc_reg_read_iter+0x178/0x2a8
vfs_read+0x5f8/0x88c
ksys_read+0x120/0x210
__arm64_sys_read+0x7c/0x90
invoke_syscall+0x98/0x2b8
el0_svc_common+0x130/0x23c
do_el0_svc+0x48/0x58
el0_svc+0x40/0x140
el0t_64_sync_handler+0x84/0x12c
el0t_64_sync+0x1ac/0x1b0
Code: aa0003f3 f9000feb f2fe7e69 f8386969 (38f86908)
---[ end trace 0000000000000000 ]---
The root cause is an initialization order problem. The lock is declared
as a global variable and intended to be initialized during module startup.
However, the procfs entry that uses this lock can be accessed by userspace
before the spin_lock_init() call has run. This creates a race window where
reading the proc file will attempt to use the lock before it is
initialized, leading to the crash.
For a global lock with a static lifetime, the correct and robust approach
is to use compile-time initialization.
Fixes: 844e5c0eb176 ("smb3 client: add way to show directory leases for improved debugging")
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Calling enqueue_reassembly() and wake_up_interruptible(&t->wait_reassembly_queue)
or put_receive_buffer() means the recvmsg/data_transfer pointer might
get re-used by another thread, which means these should be
the last operations before calling return.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
put_recvmsg/smb_direct_disconnect_rdma_connection
We should call put_recvmsg() before smb_direct_disconnect_rdma_connection()
in order to call it before waking up the callers.
In all error cases we should call smb_direct_disconnect_rdma_connection()
in order to avoid stale connections.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ib_dma_map_single already
In case of failures either ib_dma_map_single() might not be called yet
or ib_dma_unmap_single() was already called.
We should make sure put_recvmsg() only calls ib_dma_unmap_single() if needed.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There's no need to maintain two lists, we can just
have a single list of receive buffers, which are free to use.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
This is a relatively small set of fixes and device quirks that came in
during the merge window, the AMD changes adding support for ACP 7.2
systems are all just adding IDs for the devices rather than any
substantial code - the actual code is the same as for prior versions of
the platform.
|
|
There is a spelling mistake in the author's email address. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
No functional modification involved.
./drivers/mailbox/bcm74110-mailbox.c:483:2-3: Unneeded semicolon.
./drivers/mailbox/bcm74110-mailbox.c:563:2-3: Unneeded semicolon.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=22936
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add mailbox controller driver for AST27XX SoCs, which provides
independent tx/rx mailbox between different processors. There are 4
channels for each tx/rx mailbox and each channel has an 32-byte FIFO.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Introduce the mailbox module for AST27XX series SoC, which is responsible
for interchanging messages between asymmetric processors.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Providers DTS examples should not contain consumer nodes, because they
are completely redundant, obvious (defined in common schema) and add
unnecessary bloat. Drop consumer examples and unneeded node labels.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
According to Devicetree specifications, device node names should be
generic, thus Mailbox provider should be called "mailbox", not "hsp".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces, so
correct a mixture of different styles to keep consistent 4-spaces.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Lists should have fixed constraint, so add missing maxItems to the "reg"
property. Since minItems=maxItems, the minItems is implied by dtschema
so can be dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Lists should have fixed constraint, so add missing maxItems to the
"interrupts" property. Since minItems=maxItems, the minItems is implied
by dtschema so can be dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Communication Controller
Document the Inter-Processor Communication Controller on the Milos SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The bcm74110 mailbox driver is used to communicate with
a co-processor for various power management and firmware
related tasks.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add devicetree YAML binding for brcmstb bcm74110 mailbox used
for communicating with a co-processor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
__pm_runtime_put_autosuspend() was meant to be used by callers that needed
to put the Runtime PM usage_count without marking the device's last busy
timestamp. It was however seen that the Runtime PM autosuspend related
functions should include that call. Thus switch the driver to
use pm_runtime_put_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Prepare input updates for 6.17 merge window.
|
|
Make use of the newly defined BTN_GRIP* codes instead of using
BTN_TRIGGER_HAPPY* and other less suited button codes.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20250717000143.1902875-4-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Shrink the size of cifs.ko when SMB1 is not enabled in the config
by moving the SMB1 transport code to different file.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Link: https://lore.kernel.org/r/20250804093321.434674-1-tigran.mkrtchyan@desy.de
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Fix 'kernel image' end address for kaslr case.
Fixes: ec6f9f7e5bbf ("s390/boot: Add startup debugging support")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
0-day reported an off by one in the ioremap() sizing:
drivers/irqchip/irq-mvebu-gicp.c:240:45-48: WARNING:
Suspicious code. resource_size is maybe missing with gicp -> res
Convert it to resource_size(), which does the right thing.
Fixes: 3c3d7dbab2c7 ("irqchip/mvebu-gicp: Clear pending interrupts on init")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/oe-kbuild-all/202508062150.mtFQMTXc-lkp@intel.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A single btrfs commit. It fixes a problem that people started to hit
since 6.15.3 during log replay (e.g. after a crash).
The bug is old but got more likely to happen since commit
5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion") got backported to stable (6.15 only)"
* tag 'for-6.17-fix-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix log tree replay failure due to file with 0 links and extents
|
|
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
|
|
There are a couple of cases where the error is ignored or the error
code isn't propagated in ca0132_alt_select_out(). Fix those.
Fixes: def3f0a5c700 ("ALSA: hda/ca0132 - Add quirk output selection structures.")
Link: https://patch.msgid.link/20250806094423.8843-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The hda-sdw-bpt code links against the soundwire driver, but that fails when
trying to link from built-in code into loadable module:
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_close_stream.isra.0':
intel_ace2x.c:(.text+0x137a531): undefined reference to `hda_sdw_bpt_close'
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_send_async':
intel_ace2x.c:(.text+0x137aa45): undefined reference to `hda_sdw_bpt_open'
x86_64-linux-ld: intel_ace2x.c:(.text+0x137ab67): undefined reference to `hda_sdw_bpt_close'
x86_64-linux-ld: intel_ace2x.c:(.text+0x137ac30): undefined reference to `hda_sdw_bpt_send_async'
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_wait':
intel_ace2x.c:(.text+0x137aced): undefined reference to `hda_sdw_bpt_wait'
Ensure that both SOUNDWIRE_INTEL and SND_SOF_SOF_HDA_SDW_BPT are selected
at the same time by SND_SOC_SOF_INTEL_LNL, and that this happens even if
SND_SOC_SOF_INTEL_SOUNDWIRE is a loadable module but SND_SOC_SOF_INTEL_LNL
is built-in.
This follows the same logic as commit c5a61db9bf89 ("ASoC: SOF: fix
intel-soundwire link failure").
Fixes: 5d5cb86fb46e ("ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250805160451.4004602-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
A test case for fstests will be submitted soon.
Reported-by: Peter Jung <ptr1337@cachyos.org>
Link: https://lore.kernel.org/linux-btrfs/fce139db-4458-4788-bb97-c29acf6cb1df@cachyos.org/
Reported-by: burneddi <burneddi@protonmail.com>
Link: https://lore.kernel.org/linux-btrfs/lh4W-Lwc0Mbk-QvBhhQyZxf6VbM3E8VtIvU3fPIQgweP_Q1n7wtlUZQc33sYlCKYd-o6rryJQfhHaNAOWWRKxpAXhM8NZPojzsJPyHMf2qY=@protonmail.com/#t
Reported-by: Russell Haley <yumpusamongus@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/598ecc75-eb80-41b3-83c2-f2317fbb9864@gmail.com/
Fixes: f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync of a tmpfile")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Compile-testing IMX_MU_MSI on x86 without PCI_MSI support results in a
build failure:
drivers/gpio/gpio-sprd.c:8:
include/linux/gpio/driver.h:41:33: error: field 'msiinfo' has incomplete type
drivers/iommu/iommufd/viommu.c:4:
include/linux/msi.h:528:33: error: field 'alloc_info' has incomplete type
Tighten the dependency further to only allow compile testing on Arm.
This could be refined further to allow certain x86 configs.
This was submitted before to address a different build failure, which was
fixed differently, but the problem has now returned in a different form.
Fixes: 70afdab904d2d1e6 ("irqchip: Add IMX MU MSI controller driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250805160952.4006075-1-arnd@kernel.org
Link: https://lore.kernel.org/all/20221215164109.761427-1-arnd@kernel.org/
|
|
irq_shutdown_and_deactivate() is normally called with the descriptor lock
held, and interrupts disabled. Nested a few levels down, it grabs the
global irq_resend_lock. Lockdep rightfully complains when interrupts are
not disabled:
CPU0 CPU1
---- ----
lock(irq_resend_lock);
local_irq_disable();
lock(&irq_desc_lock_class);
lock(irq_resend_lock);
<Interrupt>
lock(&irq_desc_lock_class);
...
_raw_spin_lock+0x2b/0x40
clear_irq_resend+0x14/0x70
irq_shutdown_and_deactivate+0x29/0x80
irq_shutdown_depth_test+0x1ce/0x600
kunit_try_run_case+0x90/0x120
Grab the descriptor lock and disable interrupts, to resolve the
problem.
Fixes: 66067c3c8a1e ("genirq: Add kunit tests for depth counts")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/aJJONEIoIiTSDMqc@google.com
Closes: https://lore.kernel.org/lkml/31a761e4-8f81-40cf-aaf5-d220ba11911c@roeck-us.net/
|
|
Some devices save the calibrated data into L"CALI_DATA", and others into
L"SmartAmpCalibrationData". Driver code will support both.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250805070945.524-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In __hdmi_lpe_audio_probe(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in one character less
being copied from 'card->shortname' to 'pcm->name'.
Use the destination buffer size instead to ensure the card name is
copied correctly.
Cc: stable@vger.kernel.org
Fixes: 75b1a8f9d62e ("ALSA: Convert strlcpy to strscpy when return value is unused")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250805234156.60294-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Cleanup whitespace in messages in libata-core and the pata_pdc2027x,
pata_macio drivers (Colin)
- Fix ata_to_sense_error() to avoid seeing nonsensical sense data for
rare cases where we fail to get sense data from the drive. The
complementary fix to this is to ensure that we always return the
generic "ABORTED COMMAND" sense data for a failed command for which
we have no status or error fields
- The recent changes to link power management (LPM) which now prevent
the user from attempting to set an LPM policy through the
link_power_management_policy caused some regressions in test
environments because of the error that is now returned when writing
to that attribute when LPM is not supported. To allow users to not
trip on this, introduce the new link_power_management_supported
attribute to allow simple testing of a port/device LPM support (me)
* tag 'ata-6.17-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_pdc2027x: Remove space before newline and abbreviations
ata: pata_macio: Remove space before newline
ata: libata-core: Remove space before newline
ata: libata-sata: Add link_power_management_supported sysfs attribute
ata: libata-scsi: Return aborted command when missing sense and result TF
ata: libata-scsi: Fix ata_to_sense_error() status handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"This is the last pull request from me.
I'm grateful to have been able to continue as a maintainer for eight
years. From the next cycle, Nathan and Nicolas will maintain Kbuild.
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership"
* tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (92 commits)
MAINTAINERS: hand over Kbuild maintenance
kheaders: make it possible to override TAR
kbuild: userprogs: use correct linker when mixing clang and GNU ld
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
kconfig: gconf: refactor text_insert_help()
kconfig: gconf: remove unneeded variable in text_insert_msg
kconfig: gconf: use hyphens in signals
kconfig: gconf: replace GtkImageMenuItem with GtkMenuItem
kconfig: gconf: Fix Back button behavior
kconfig: gconf: fix single view to display dependent symbols correctly
scripts: add zboot support to extract-vmlinux
gendwarfksyms: order -T symtypes output by name
gendwarfksyms: use preferred form of sizeof for allocation
kconfig: qconf: confine {begin,end}Group to constructor and destructor
kconfig: qconf: fix ConfigList::updateListAllforAll()
kconfig: add a function to dump all menu entries in a tree-like format
kconfig: gconf: show GTK version in About dialog
kconfig: gconf: replace GtkHPaned and GtkVPaned with GtkPaned
kconfig: gconf: replace GdkColor with GdkRGBA
...
|
|
The venus driver fails to check if dev_pm_opp_find_freq_{ceil,floor}()
returns an error pointer before calling dev_pm_opp_put(). This causes
a crash when OPP tables are not present in device tree.
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 000000000000002e
...
pc : dev_pm_opp_put+0x1c/0x4c
lr : core_clks_enable+0x4c/0x16c [venus_core]
Add IS_ERR() checks before calling dev_pm_opp_put() to avoid
dereferencing error pointers.
Fixes: b179234b5e59 ("media: venus: pm_helpers: use opp-table for the frequency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
Pull perf fixes from Thomas Gleixner:
"Perf fixes for perf_mmap() reference counting to prevent potential
reference count leaks which are caused by:
- VMA splits, which change the offset or size of a mapping, which
causes perf_mmap_close() to ignore the unmap or unmap the wrong
buffer.
- Several internal issues of perf_mmap(), which can cause reference
count leaks in the perf mmap, corrupt accounting or cause leaks in
perf drivers.
The main fix is to prevent VMA splits by implementing the
[may_]split() callback for vm operations.
The other issues are addressed by rearranging code, early returns on
failure and invocation of cleanups.
Also provide a selftest to validate the fixes.
The reference counting should be converted to refcount_t, but that
requires larger refactoring of the code and will be done once these
fixes are upstream"
* tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git:
selftests/perf_events: Add a mmap() correctness test
perf/core: Prevent VMA split of buffer mappings
perf/core: Handle buffer mapping fail correctly in perf_mmap()
perf/core: Exit early on perf_mmap() fail
perf/core: Don't leak AUX buffer refcount on allocation failure
perf/core: Preserve AUX buffer allocation failure result
|
|
The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.
The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.
Cc: stable@vger.kernel.org
Cc: Armando Budianto <sprite@gnuweeb.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi96284nuQ@mail.gmail.com
Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_BTDcXddw@mail.gmail.com
Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb.org
Fixes: 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I'm stepping down as the maintainer of Kbuild/Kconfig.
It was enjoyable to refactor and improve the kernel build system,
but due to personal reasons, I believe it's difficult for me to
continue in this role any further.
I discussed this off-list with Nathan and Nicolas, and they have
kindly agreed to take over the maintenance of Kbuild with Odd Fixes.
I'm grateful to them for stepping in.
As for Kconfig, there are currently no designated reviewers, so the
maintainer position will remain vacant for now. I hope someone will
step up to take on the role.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Commit 86cdd2fdc4e3 ("kheaders: make headers archive reproducible")
introduced a number of options specific to GNU tar to the `tar`
invocation in `gen_kheaders.sh` script. This causes the script to fail
to work on systems where `tar` is not GNU tar. This can occur e.g.
on recent Gentoo Linux installations that support using bsdtar from
libarchive instead.
Add a `TAR` make variable to make it possible to override the tar
executable used, e.g. by specifying:
make TAR=gtar
Link: https://bugs.gentoo.org/884061
Reported-by: Sam James <sam@gentoo.org>
Tested-by: Sam James <sam@gentoo.org>
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The userprogs infrastructure does not expect clang being used with GNU ld
and in that case uses /usr/bin/ld for linking, not the configured $(LD).
This fallback is problematic as it will break when cross-compiling.
Mixing clang and GNU ld is used for example when building for SPARC64,
as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst.
Relax the check around --ld-path so it gets used for all linkers.
Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
strcpy() performs no bounds checking and can lead to buffer overflows if
the input string exceeds the destination buffer size. This patch replaces
it with strncpy(), and null terminates the input string.
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Reviewed-by: Nicolas Schier <nicolas.schier@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
strcpy() does not perform bounds checking and can lead to buffer overflows
if the source string exceeds the destination buffer size. In
print_autowrap(), replace strcpy() with snprintf() to safely copy the
prompt string into the fixed-size tempstr buffer.
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
emac_rx_packet() is a common function for handling traffic
for both xdp and non-xdp use cases. Use common logic for
handling skb with or without xdp to prevent any incorrect
packet processing. This patch fixes ping working with
XDP_PASS for icssg driver.
Fixes: 62aa3246f4623 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250803180216.3569139-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 2677010e7793 ("Add support to set NAPI threaded for individual
NAPI") added support to enable/disable threaded napi using netlink. This
also extended the napi config save/restore functionality to set the napi
threaded state. This breaks netdev reset for drivers that use napi
threaded at device level and also use napi config save/restore on
napi_disable/napi_enable. Basically on netdev with napi threaded enabled
at device level, a napi_enable call will get stuck trying to stop the
napi kthread. This is because the napi->config->threaded is set to
disabled when threaded is enabled at device level.
The issue can be reproduced on virtio-net device using qemu. To
reproduce the issue run following,
echo 1 > /sys/class/net/threaded
ethtool -L eth0 combined 1
Update the threaded state in napi config in netif_set_threaded and add a
new test that verifies this scenario.
Tested on qemu with virtio-net:
NETIF=eth0 ./tools/testing/selftests/drivers/net/napi_threaded.py
TAP version 13
1..2
ok 1 napi_threaded.change_num_queues
ok 2 napi_threaded.enable_dev_threaded_disable_napi_threaded
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 2677010e7793 ("Add support to set NAPI threaded for individual NAPI")
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250804164457.2494390-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
