summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-27iwlwifi: remove some unused extern declarations from iwl-config.hLuca Coelho
After the refactoring, a few extern declarations were accidentally left in the iwl-config.h file. Remove them Change-Id: I79745e440ed5a0a90db61b0daaae374ecef09e86 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: move integrated, extra_phy and soc_latency to trans_cfgLuca Coelho
These values are selected based on the PCI device ID, so the decision to use them can be made early. By moving them to the trans_cfg, we avoid duplicating the large cfg structs for small pieces of data (sometimes a single boolean). This will also allow us to make more decisions based on, for instance, the SoC type in used. The trans_cfg concept changes a bit, because previously it was used only to boot the device before reading further characteristics and now it also contains more data that is associated with the device ID. Change-Id: Ib71b07ea9e322eb74571dc5e8aa58f17eece5c9c Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: mvm: enable SF also when we have HEJohannes Berg
We shouldn't do this just for HT/VHT, but be future-proof and also check for HE. Change-Id: Icaeff714c00a773681dbfee72558afd1c7121c5d Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: remove redundant iwl9560_2ac_cfg structLuca Coelho
The iwl9560_2ac_cfg struct is used for PNJ devices and the configuration is the same as iwl9260_2ac_cfg, so we can remove the former to avoid redundancy. Change-Id: I17ac1802f00bd80006930b922a9fc21df60e3c16 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: mvm: rs-fw: fix some indentationJohannes Berg
That closing brace for the switch statement is misplaced, fix it. Change-Id: I39af135a9e3fc64337d2cced43a70cb48fe3b9c1 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: scan: support scan req cmd ver 14Shahar S Matityahu
Modify adaptive dwell number of APs override API Instead of using channel to index mapping, add the adaptive dwell override parameters as part of the configuration per channel in the scan request command. Support 2 different override values and use them as follows: 1. 10 APs for friendly GO channels in p2p scan. 2. 2 APs for social channels in p2p scan. Change-Id: I3b461108abf2306c3d054099112f2c3afce1cc92 Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: pass trans and NVM data to HE capability parsingJohannes Berg
We'll need this data in the future, pass the values. Change-Id: Iaeff50716e783f5c0bcea86ca1c93ada1560525e Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: pcie: implement read_config32Luca Coelho
Add the read_config32 op to allow dumping the config space when needed. Change-Id: Ib2d254a38a4bfb95dcc3d04eec91781827a0c623 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: yoyo: add PCI config space region typeLuca Coelho
Add a new region type that allows us to dump the PCI config space. This is mostly the same as dumping a memory region, but reading from the device's config space instead. In order to make this generic and independent of the trans type, we make a function called iwl_dump_ini_config_iter() that calls a new op in the transport to read its config space. Change-Id: I15151bddf589f13b0e0a45c28b96bbcd73bcfdeb Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: mvm: add soc latency supportShahar S Matityahu
Some devices require longer time to stabilize the power and XTAL. This is especially true for devices integrated in the SoC. Add support for a new firmware API that allows the driver to set the latency value accordingly. Change-Id: I6829a46b89e4e701f80a0e4033f4dd41ee44ed12 Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-26dt-bindings: imx8mm-clock: Fix the file pathFabio Estevam
Currently the following warning is seen with 'make dt_binding_check': Documentation/devicetree/bindings/clock/imx8mm-clock.yaml: $id: relative path/filename doesn't match actual path or filename Fix it by removing the "bindings" directory from the file path. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lkml.kernel.org/r/20200326171933.13394-2-festevam@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-26dt-bindings: imx8mq-clock: Fix the file pathFabio Estevam
Currently the following warning is seen with 'make dt_binding_check': Documentation/devicetree/bindings/clock/imx8mq-clock.yaml: $id: relative path/filename doesn't match actual path or filename Fix it by removing the "bindings" directory from the file path. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lkml.kernel.org/r/20200326171933.13394-1-festevam@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-27powerpc/boot: Delete unneeded .globl _zimage_startFangrui Song
.globl sets the symbol binding to STB_GLOBAL while .weak sets the binding to STB_WEAK. GNU as let .weak override .globl since binutils-gdb 5ca547dc2399a0a5d9f20626d4bf5547c3ccfddd (1996). Clang integrated assembler let the last win but it may error in the future. Since it is a convention that only one binding directive is used, just delete .globl. Fixes: ee9d21b3b358 ("powerpc/boot: Ensure _zimage_start is a weak symbol") Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200325164257.170229-1-maskray@google.com
2020-03-27powerpc/pseries: Handle UE event for memcpy_mcsafeGanesh Goudar
memcpy_mcsafe has been implemented for power machines which is used by pmem infrastructure, so that an UE encountered during memcpy from pmem devices would not result in panic instead a right error code is returned. The implementation expects machine check handler to ignore the event and set nip to continue the execution from fixup code. Appropriate changes are already made to powernv machine check handler, make similar changes to pseries machine check handler to ignore the the event and set nip to continue execution at the fixup entry if we hit UE at an instruction with a fixup entry. while we are at it, have a common function which searches the exception table entry and updates nip with fixup address, and any future common changes can be made in this function that are valid for both architectures. powernv changes are made by commit 895e3dceeb97 ("powerpc/mce: Handle UE event for memcpy_mcsafe") Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Reviewed-by: Santosh S <santosh@fossix.org> Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200326184916.31172-1-ganeshgr@linux.ibm.com
2020-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix to generate proper timestamps on key autorepeat events that were broken recently - a fix for Synaptics driver to only activate reduced reporting mode when explicitly requested - a new keycode for "selective screenshot" function - other assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: fix stale timestamp on key autorepeat events Input: move the new KEY_SELECTIVE_SCREENSHOT keycode Input: avoid BIT() macro usage in the serio.h UAPI header Input: synaptics-rmi4 - set reduced reporting mode only when requested Input: synaptics - enable RMI on HP Envy 13-ad105ng Input: allocate keycode for "Selective Screenshot" key Input: tm2-touchkey - add support for Coreriver TC360 variant dt-bindings: input: add Coreriver TC360 binding dt-bindings: vendor-prefixes: Add Coreriver vendor prefix Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()
2020-03-26net: phy: don't touch suspended flag if there's no suspend/resume callbackHeiner Kallweit
So far we set phydev->suspended to true in phy_suspend() even if the PHY driver doesn't implement the suspend callback. This applies accordingly for the resume path. The current behavior doesn't cause any issue I'd be aware of, but it's not logical and misleading, especially considering the description of the flag: "suspended: Set to true if this phy has been suspended successfully" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: ks8851-ml: Fix IO operations, againMarek Vasut
This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it turns out these were only necessary due to buggy hardware. This patch adds a check for such a buggy hardware to prevent any such mistakes again. While working further on the KS8851 driver, it came to light that the KS8851-16MLL is capable of switching bus endianness by a hardware strap, EESK pin. If this strap is incorrect, the IO accesses require such endian swapping as is being reverted by this patch. Such swapping also impacts the performance significantly. Hence, in addition to removing it, detect that the hardware is broken, report to user, and fail to bind with such hardware. Fixes: 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") Fixes: edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access") Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26Merge branch 'net-atlantic-MACSec-support-for-AQC-devices'David S. Miller
Igor Russkikh says: ==================== net: atlantic: MACSec support for AQC devices This patchset introduces MACSec HW offloading support in Marvell(Aquantia) AQC atlantic driver. This implementation is a joint effort of Marvell developers on top of the work started by Antoine Tenart. v2: * clean up the generated code (removed useless bit operations); * use WARN_ONCE to avoid log spam; * use put_unaligned_be64; * removed trailing \0 and length limit for format strings; v1: https://patchwork.ozlabs.org/cover/1259998/ RFC v2: https://patchwork.ozlabs.org/cover/1252204/ RFC v1: https://patchwork.ozlabs.org/cover/1238082/ Several patches introduce backward-incompatible changes and are subject for discussion/drop: 1) patch 0007: multicast/broadcast when offloading is needed to handle ARP requests, because they have broadcast destination address; With this patch we also match and encrypt/decrypt packets between macsec hw and realdev based on device's mac address. This can potentially be used to support multiple macsec offloaded interfaces on top of one realdev. However in some environments this could lead to problems, e.g. the 'bridge over macsec' configuration will expect the packets with unknown src MAC should come through macsec. The patch is questionable, we've used it because our current hw setup and requirements both assume that the decryption is done based on mac address match only. This could be changed by encrypting/decripting all the traffic (except control). 2) patch 0009: real_dev features are now propagated to macsec device (when HW offloading is enabled), otherwise feature set might lead to HW reconfiguration during MACSec configuration. Also, HW offloaded macsec should be able to keep LRO LSO features, since they are transparent for macsec engine (at least in our hardware). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: add XPN handlingMark Starovoytov
This patch adds XPN handling. Our driver doesn't support XPN, but we should still update a couple of places in the code, because the size of 'next_pn' field has changed. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec offload statistics implementationDmitry Bogdanov
This patch adds support for MACSec statistics on Atlantic network cards. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec offload statistics HW bindingsDmitry Bogdanov
This patch adds the Atlantic HW-specific bindings for MACSec statistics, e.g. register addresses / structs, helper function, etc, which will be used by actual callback implementations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec ingress offload implementationMark Starovoytov
This patch adds support for MACSec ingress HW offloading on Atlantic network cards. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec ingress offload HW bindingsMark Starovoytov
This patch adds the Atlantic HW-specific bindings for MACSec ingress, e.g. register addresses / structs, helper function, etc, which will be used by actual callback implementations. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec egress offload implementationDmitry Bogdanov
This patch adds support for MACSec egress HW offloading on Atlantic network cards. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec egress offload HW bindingsDmitry Bogdanov
This patch adds the Atlantic HW-specific bindings for MACSec egress, e.g. register addresses / structs, helper function, etc, which will be used by actual callback implementations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec offload skeletonDmitry Bogdanov
This patch adds basic functionality for MACSec offloading for Atlantic NICs. MACSec offloading functionality is enabled if network card has appropriate FW that has MACSec offloading enabled in config. Actual functionality (ingress, egress, etc) will be added in follow-up patches. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: report real_dev features when HW offloading is enabledMark Starovoytov
This patch makes real_dev_feature propagation by MACSec offloaded device. Issue description: real_dev features are disabled upon macsec creation. Root cause: Features limitation (specific to SW MACSec limitation) is being applied to HW offloaded case as well. This causes 'set_features' request on the real_dev with reduced feature set due to chain propagation. Proposed solution: Report real_dev features when HW offloading is enabled. NB! MACSec offloaded device does not propagate VLAN offload features at the moment. This can potentially be added later on as a separate patch. Note: this patch requires HW offloading to be enabled by default in order to function properly. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: add support for getting offloaded statsDmitry Bogdanov
When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: support multicast/broadcast when offloadingMark Starovoytov
The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: allow multiple macsec devices with offloadDmitry Bogdanov
Offload engine can setup several SecY. Each macsec interface shall have its own mac address. It will filter a traffic by dest mac address. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: init secy pointer in macsec_contextDmitry Bogdanov
This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: add support for offloading to the MACAntoine Tenart
This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC, allowing a user to select a MAC as a provider for MACsec offloading operations. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: allow to reference a netdev from a MACsec contextAntoine Tenart
This patch allows to reference a net_device from a MACsec context. This is needed to allow implementing MACsec operations in net device drivers. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: add a reference to MACsec ops in net_deviceAntoine Tenart
This patch adds a reference to MACsec ops to the net_device structure, allowing net device drivers to implement offloading operations for MACsec. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: introduce the MACSEC netdev featureAntoine Tenart
This patch introduce a new netdev feature, which will be used by drivers to state they can perform MACsec transformations in hardware. The patchset was gathered by Mark, macsec functinality itself was implemented by Dmitry, Mark and Pavel Belous. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26scsi: lpfc: Fix crash in target side cable pulls hitting WAIT_FOR_UNREGJames Smart
Kernel is crashing with the following stacktrace: BUG: unable to handle kernel NULL pointer dereference at 00000000000005bc IP: lpfc_nvme_register_port+0x1a8/0x3a0 [lpfc] ... Call Trace: lpfc_nlp_state_cleanup+0x2b2/0x500 [lpfc] lpfc_nlp_set_state+0xd7/0x1a0 [lpfc] lpfc_cmpl_prli_prli_issue+0x1f7/0x450 [lpfc] lpfc_disc_state_machine+0x7a/0x1e0 [lpfc] lpfc_cmpl_els_prli+0x16f/0x1e0 [lpfc] lpfc_sli_sp_handle_rspiocb+0x5b2/0x690 [lpfc] lpfc_sli_handle_slow_ring_event_s4+0x182/0x230 [lpfc] lpfc_do_work+0x87f/0x1570 [lpfc] kthread+0x10d/0x130 ret_from_fork+0x35/0x40 During target side fault injections, it is possible to hit the NLP_WAIT_FOR_UNREG case in lpfc_nvme_remoteport_delete. A prior commit fixed a rebind and delete race condition, but called lpfc_nlp_put unconditionally. This triggered a deletion and the crash. Fix by movng nlp_put to inside the NLP_WAIT_FOR_UNREG case, where the nlp will be being unregistered/removed. Leave the reference if the flag isn't set. Link: https://lore.kernel.org/r/20200322181304.37655-8-jsmart2021@gmail.com Fixes: b15bd3e6212e ("scsi: lpfc: Fix nvme remoteport registration race conditions") Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: lpfc: Fix update of wq consumer index in lpfc_sli4_wq_releaseJames Smart
The lpfc_sli4_wq_release() routine iterates for each interim value when updating the wq consuemr index. This wastes cycles and possibly confuses things as thevalue itterates (and the modulo logic is being applied). There's no reason for this. Just set it to the value from the hw. Link: https://lore.kernel.org/r/20200322181304.37655-7-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: lpfc: Fix crash after handling a pci errorJames Smart
Injecting EEH on a 32GB card is causing kernel oops The pci error handler is doing an IO flush and the offline code is also doing an IO flush. When the 1st flush is complete the hdwq is destroyed (freed), yet the second flush accesses the hdwq and crashes. Added a check in lpfc_sli4_fush_io_rings to check both the HBA_IOQ_FLUSH flag and the hdwq pointer to see if it is already set and not already freed. Link: https://lore.kernel.org/r/20200322181304.37655-6-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: lpfc: Fix scsi host template for SLI3 vportsJames Smart
SCSI layer sends driver IOs with more s/g segments than driver can handle. This results in "Too many sg segments from dma_map_sg. Config 64, seg_cnt 219" error messages from the lpfc_scsi_prep_dma_buf_s3() routine. The was due to use the driver using individual templates for pport and vport, host reset enabled or not, nvme vs scsi, etc. In the end, there was a combination for a vport that didn't match the pport. Rather than enumerating more templates and more discretionary assignments, revert to a base template that is copied to a template specific to the pport/vport. Then, based on role, attributes and sli type, modify the fields that are different for that port. Added a log message to lpfc_create_port to validate values. Link: https://lore.kernel.org/r/20200322181304.37655-5-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: lpfc: Fix lpfc overwrite of sg_cnt field in nvmefc_tgt_fcp_reqJames Smart
In lpfc_nvmet_prep_fcp_wqe() the line "rsp->sg_cnt = 0" is modifying the transport's data structure. This may result in the transport believing the s/g list was already freed, thus may not unmap/free it properly. Lpfc driver should not modify the transport data structure. The zeroing of the sg_cnt is to avoid use of the transport's sgl in a subsequent loop where the driver builds the necessary requests for the adapter firmware to complete the IO. Change LLDD to use a local copy of the transport sg_cnt when building requests to be passed to the adapter fw. Link: https://lore.kernel.org/r/20200322181304.37655-4-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: lpfc: Fix lockdep error - register non-static keyJames Smart
The following lockdep error was reported when unloading the lpfc driver: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. ... Call Trace: dump_stack+0x96/0xe0 register_lock_class+0x8b8/0x8c0 ? lockdep_hardirqs_on+0x190/0x280 ? is_dynamic_key+0x150/0x150 ? wait_for_completion_interruptible+0x2a0/0x2a0 ? wake_up_q+0xd0/0xd0 __lock_acquire+0xda/0x21a0 ? register_lock_class+0x8c0/0x8c0 ? synchronize_rcu_expedited+0x500/0x500 ? __call_rcu+0x850/0x850 lock_acquire+0xf3/0x1f0 ? del_timer_sync+0x5/0xb0 del_timer_sync+0x3c/0xb0 ? del_timer_sync+0x5/0xb0 lpfc_pci_remove_one.cold.102+0x8b7/0x935 [lpfc] ... Unloading the driver resulted in a call to del_timer_sync for the cpuhp_poll_timer. However the call to setup the timer had never been made, so the timer structures used by lockdep checking were not initialized. Unconditionally call setup_timer for the cpuhp_poll_timer during driver initialization. Calls to start the timer remain "as needed". Link: https://lore.kernel.org/r/20200322181304.37655-3-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: lpfc: Fix kasan slab-out-of-bounds error in lpfc_unreg_loginJames Smart
The following kasan bug was called out: BUG: KASAN: slab-out-of-bounds in lpfc_unreg_login+0x7c/0xc0 [lpfc] Read of size 2 at addr ffff889fc7c50a22 by task lpfc_worker_3/6676 ... Call Trace: dump_stack+0x96/0xe0 ? lpfc_unreg_login+0x7c/0xc0 [lpfc] print_address_description.constprop.6+0x1b/0x220 ? lpfc_unreg_login+0x7c/0xc0 [lpfc] ? lpfc_unreg_login+0x7c/0xc0 [lpfc] __kasan_report.cold.9+0x37/0x7c ? lpfc_unreg_login+0x7c/0xc0 [lpfc] kasan_report+0xe/0x20 lpfc_unreg_login+0x7c/0xc0 [lpfc] lpfc_sli_def_mbox_cmpl+0x334/0x430 [lpfc] ... When processing the completion of a "Reg Rpi" login mailbox command in lpfc_sli_def_mbox_cmpl, a call may be made to lpfc_unreg_login. The vpi is extracted from the completing mailbox context and passed as an input for the next. However, the vpi stored in the mailbox command context is an absolute vpi, which for SLI4 represents both base + offset. When used with a non-zero base component, (function id > 0) this results in an out-of-range access beyond the allocated phba->vpi_ids array. Fix by subtracting the function's base value to get an accurate vpi number. Link: https://lore.kernel.org/r/20200322181304.37655-2-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26taprio: do not use BIT() in TCA_TAPRIO_ATTR_FLAG_* definitionsEugene Syromiatnikov
BIT() macro definition is internal to the Linux kernel and is not to be used in UAPI headers; replace its usage with the _BITUL() macro that is already used elsewhere in the header. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26ipv6: ndisc: add support for 'PREF64' dns64 prefix identifierMaciej Żenczykowski
This is trivial since we already have support for the entirely identical (from the kernel's point of view) RDNSS, DNSSL, etc. that also contain opaque data that needs to be passed down to userspace for further processing. As specified in draft-ietf-6man-ra-pref64-09 (while it is still a draft, it is purely waiting on the RFC Editor for cleanups and publishing): PREF64 option contains lifetime and a (up to) 96-bit IPv6 prefix. The 8-bit identifier of the option type as assigned by the IANA is 38. Since we lack DNS64/NAT64/CLAT support in kernel at the moment, thus this option should also be passed on to userland. See: https://tools.ietf.org/html/draft-ietf-6man-ra-pref64-09 https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml#icmpv6-parameters-5 Cc: Erik Kline <ek@google.com> Cc: Jen Linkova <furry@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Michael Haro <mharo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27Merge tag 'amd-drm-fixes-5.6-2020-03-26' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-26: Scheduler: - Fix a race condition that could result in a segfault Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200326144538.3937-1-alexander.deucher@amd.com
2020-03-26Merge branch 'net-ethernet-ti-add-networking-support-for-k3-am65x-j721e-soc'David S. Miller
Grygorii Strashko says: ==================== net: ethernet: ti: add networking support for k3 am65x/j721e soc This v6 series adds basic networking support support TI K3 AM654x/J721E SoC which have integrated Gigabit Ethernet MAC (Media Access Controller) into device MCU domain and named MCU_CPSW0 (CPSW2G NUSS). Formally TRMs refer CPSW2G NUSS as two-port Gigabit Ethernet Switch subsystem with port 0 being the CPPI DMA host port and port 1 being the external Ethernet port, but for 1 external port device it's just Port 0 <-> ALE <-> Port 1 and it's rather device with HW filtering capabilities then actually switching device. It's expected to have similar devices, but with more external ports. The new Host port 0 Communications Port Programming Interface (CPPI5) is operating by TI AM654x/J721E NAVSS Unified DMA Peripheral Root Complex (UDMA-P) controller [1]. The CPSW2G contains below modules for which existing code is re-used: - MAC SL: cpsw_sl.c - Address Lookup Engine (ALE): cpsw_ale.c, basically compatible with K2 66AK2E/G - Management Data Input/Output interface (MDIO): davinci_mdio.c, fully compatible with TI AM3/4/5 devices Basic features supported by CPSW2G NUSS driver: - VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on ingress, Auto VLAN removal on egress and auto pad to minimum frame size. - multicast filtering - promisc mode - TX multiq support in Round Robin or Fixed priority modes - RX checksum offload for non-fragmented IPv4/IPv6 TCP/UDP packets - TX checksum offload support for IPv4/IPv6 TCP/UDP packets (J721E only). Features under development: - Support for IEEE 1588 Clock Synchronization. The CPSW2G NUSS includes new version of Common Platform Time Sync (CPTS) - tc-mqprio: priority level Quality Of Service (QOS) support (802.1p) - tc-cbs: Support for Audio/Video Bridging (P802.1Qav/D6.0) HW shapers - tc-taprio: IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic - frame preemption: IEEE P902.3br/D2.0 Interspersing Express Traffic, 802.1Qbu - extended ALE features: classifier/policers, auto-aging Patches 1-6 are intended for netdev, Patches 7-11 are intended for K3 Platform tree and provided here for testing purposes. Changes in v6: - fixed comments from Rob Herring <robh@kernel.org> and added his Reviewed-by. - added Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Changes in v5: - renamed files k3-udma-desc-pool.* k3-udma-desc-pool to k3-cppi-desc-pool.*, and API to k3_cppi_desc_pool_* as requested by Peter Ujfalusi <peter.ujfalusi@ti.com> - fixed copy-paste err in am65_cpsw_nuss_ndo_slave_set_rx_mode() which blocked recieving of mcast frames. - added Tested-by: Murali Karicheri <m-karicheri2@ti.com> Changes in v4: - fixed minor comments from Jakub Kicinski <kuba@kernel.org> - dependencies resolved: required phy-rmii-sel changes [2] queued for merge except one [3] which is included in this series with Kishon's ask. Changes in v3: - add ARM64 defconfig changes for testing purposes - fixed DT yaml definition - fixed comments from Jakub Kicinski <kuba@kernel.org> Changes in v2: - fixed DT yaml definition - fixed comments from David Miller v5: https://patchwork.ozlabs.org/cover/1258295/ v4: https://patchwork.ozlabs.org/cover/1256092/ v3: https://patchwork.ozlabs.org/cover/1254568/ v2: https://patchwork.ozlabs.org/cover/1250674/ v1: https://lwn.net/Articles/813087/ TRMs: AM654: http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf J721E: http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf Preliminary documentation can be found at: http://software-dl.ti.com/processor-sdk-linux/esd/docs/latest/linux/Foundational_Components/Kernel/Kernel_Drivers/Network/K3_CPSW2g.html [1] https://lwn.net/Articles/808030/ [2] https://lkml.org/lkml/2020/2/22/100 [3] https://lkml.org/lkml/2020/3/3/724 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: defconfig: ti: k3: enable dma and networkingGrygorii Strashko
Enable TI K3 AM654x/J721E DMA and networking options. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: dts: ti: k3-j721e-common-proc-board: add mcu cpsw nuss pinmux and phy ↵Grygorii Strashko
defs The TI J721E EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI j721e SoC MCU Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: dts: ti: k3-j721e-mcu: add mcu cpsw nuss nodeGrygorii Strashko
Add DT node for The TI J721E MCU SoC Gigabit Ethernet subsystem (MCU CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defsGrygorii Strashko
AM654 EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI am654 SoC Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 04:24:49 +0000