summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-12perf hists: Introduce hist_entry_opsJiri Olsa
Introducing allocation callbacks, that allows to extend current hist_entry object into objects with special needs without polluting the current hist_entry object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467701765-26194-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12perf hists: Introduce hist_entry__init functionJiri Olsa
Move the 'struct hist_entry' initialization code to a separate function. It'll be useful and more clear for the following patches that introduce allocation callbacks. Releasing the hist_entry object in hist_entry__new function (where it's allocated) rather than in hist_entry__init. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467701765-26194-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-11net: ethernet: bgmac: Fix return value check in bgmac_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11r8152: Add support for setting pass through MAC address on RTL8153-ADMario Limonciello
The RTL8153-AD supports a persistent system specific MAC address. This means a device plugged into two different systems with host side support will show different (but persistent) MAC addresses. This information for the system's persistent MAC address is burned in when the system HW is built and available under \_SB.AMAC in the DSDT at runtime. This technology is currently implemented in the Dell TB15 and WD15 Type-C docks. More information is available here: http://www.dell.com/support/article/us/en/04/SLN301147 Signed-off-by: Mario Limonciello <mario_limonciello@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12cpufreq: powernv: Replacing pstate_id with frequency table indexAkshay Adiga
Refactoring code to use frequency table index instead of pstate_id. This abstraction will make the code independent of the pstate values. - No functional changes - The highest frequency is at frequency table index 0 and the frequency decreases as the index increases. - Macros pstates_to_idx() and idx_to_pstate() can be used for conversion between pstate_id and index. - powernv_pstate_info now contains frequency table index to min, max and nominal frequency (instead of pstate_ids) - global_pstate_info new stores index values instead pstate ids. - variables renamed as *_idx which now store index instead of pstate Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-12Bluetooth: Add support of 13d3:3490 AR3012 deviceDmitry Tunin
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=05 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3490 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1600623 Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-07-11sock: ignore SCM_RIGHTS and SCM_CREDENTIALS in __sock_cmsg_sendSoheil Hassas Yeganeh
Sergei Trofimovich reported that pulse audio sends SCM_CREDENTIALS as a control message to TCP. Since __sock_cmsg_send does not support SCM_RIGHTS and SCM_CREDENTIALS, it returns an error and hence breaks pulse audio over TCP. SCM_RIGHTS and SCM_CREDENTIALS are sent on the SOL_SOCKET layer but they semantically belong to SOL_UNIX. Since all cmsg-processing functions including sock_cmsg_send ignore control messages of other layers, it is best to ignore SCM_RIGHTS and SCM_CREDENTIALS for consistency (and also for fixing pulse audio over TCP). Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Reported-by: Sergei Trofimovich <slyfox@gentoo.org> Tested-by: Sergei Trofimovich <slyfox@gentoo.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11b53: Fix build warning.David S. Miller
drivers/net/dsa/b53/b53_srab.c: In function 'b53_srab_probe': >> drivers/net/dsa/b53/b53_srab.c:388:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] pdata->chip_id = (u32)of_id->data; ^ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11bpf: make inode code explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: init/Kconfig:config BPF_SYSCALL init/Kconfig: bool "Enable bpf() system call" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Note that MODULE_ALIAS is a no-op for non-modular code. We replace module.h with init.h since the file does use __init. Cc: Alexei Starovoitov <ast@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11nfp: check idx is -ENOSPC before using it is an indexColin Ian King
idx can be returned as -ENOSPC, so we should check for this first before using it as an index into nn->vxlan_usecnt[] to avoid an out of bounds array offset read. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11net: smc91x: ACPI Enable lan91x adaptersJeremy Linton
Enable lan91x adapters in some ARM machines and models when booted with an ACPI kernel. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11drivers/net: fixup comments after "Future-proof tunnel offload handlers"Sabrina Dubroca
Some comments weren't updated to reflect the renaming of ndo's and the change of arguments. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11ipv4: reject RTNH_F_DEAD and RTNH_F_LINKDOWN from user spaceJulian Anastasov
Vegard Nossum is reporting for a crash in fib_dump_info when nh_dev = NULL and fib_nhs == 1: Pid: 50, comm: netlink.exe Not tainted 4.7.0-rc5+ RIP: 0033:[<00000000602b3d18>] RSP: 0000000062623890 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006261b800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000024 RDI: 000000006245ba00 RBP: 00000000626238f0 R08: 000000000000029c R09: 0000000000000000 R10: 0000000062468038 R11: 000000006245ba00 R12: 000000006245ba00 R13: 00000000625f96c0 R14: 00000000601e16f0 R15: 0000000000000000 Kernel panic - not syncing: Kernel mode fault at addr 0x2e0, ip 0x602b3d18 CPU: 0 PID: 50 Comm: netlink.exe Not tainted 4.7.0-rc5+ #581 Stack: 626238f0 960226a02 00000400 000000fe 62623910 600afca7 62623970 62623a48 62468038 00000018 00000000 00000000 Call Trace: [<602b3e93>] rtmsg_fib+0xd3/0x190 [<602b6680>] fib_table_insert+0x260/0x500 [<602b0e5d>] inet_rtm_newroute+0x4d/0x60 [<60250def>] rtnetlink_rcv_msg+0x8f/0x270 [<60267079>] netlink_rcv_skb+0xc9/0xe0 [<60250d4b>] rtnetlink_rcv+0x3b/0x50 [<60265400>] netlink_unicast+0x1a0/0x2c0 [<60265e47>] netlink_sendmsg+0x3f7/0x470 [<6021dc9a>] sock_sendmsg+0x3a/0x90 [<6021e0d0>] ___sys_sendmsg+0x300/0x360 [<6021fa64>] __sys_sendmsg+0x54/0xa0 [<6021fac0>] SyS_sendmsg+0x10/0x20 [<6001ea68>] handle_syscall+0x88/0x90 [<600295fd>] userspace+0x3fd/0x500 [<6001ac55>] fork_handler+0x85/0x90 $ addr2line -e vmlinux -i 0x602b3d18 include/linux/inetdevice.h:222 net/ipv4/fib_semantics.c:1264 Problem happens when RTNH_F_LINKDOWN is provided from user space when creating routes that do not use the flag, catched with netlink fuzzer. Currently, the kernel allows user space to set both flags to nh_flags and fib_flags but this is not intentional, the assumption was that they are not set. Fix this by rejecting both flags with EINVAL. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Fixes: 0eeb075fad73 ("net: ipv4 sysctl option to ignore routes when nexthop link is down") Signed-off-by: Julian Anastasov <ja@ssi.bg> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Cc: Dinesh Dutt <ddutt@cumulusnetworks.com> Cc: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11tcp: make challenge acks less predictableEric Dumazet
Yue Cao claims that current host rate limiting of challenge ACKS (RFC 5961) could leak enough information to allow a patient attacker to hijack TCP sessions. He will soon provide details in an academic paper. This patch increases the default limit from 100 to 1000, and adds some randomization so that the attacker can no longer hijack sessions without spending a considerable amount of probes. Based on initial analysis and patch from Linus. Note that we also have per socket rate limiting, so it is tempting to remove the host limit in the future. v2: randomize the count of challenge acks per second, not the period. Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2") Reported-by: Yue Cao <ycao009@ucr.edu> Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11MAINTAINERS: release Scott from being a rocker maintainerJiri Pirko
As requested by Scott, removing him. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11tunnels: correct conditional build of MPLS and IPv6Simon Horman
Using a combination if #if conditionals and goto labels to unwind tunnel4_init seems unwieldy. This patch takes a simpler approach of directly unregistering previously registered protocols when an error occurs. This fixes a number of problems with the current implementation including the potential presence of labels when they are unused and the potential absence of unregister code when it is needed. Fixes: 8afe97e5d416 ("tunnels: support MPLS over IPv4 tunnels") Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11Merge branch 'sctp-rfc7496-support'David S. Miller
Xin Long says: ==================== sctp: implement rfc7496 in sctp This patchset implements "Additional Policies for the Partially Reliable Stream Control Transmission Protocol Extension" described on RFC7496. The Partially Reliable SCTP (PR-SCTP) extension defined in [RFC3758] provides a generic method for senders to abandon user messages. The decision to abandon a user message is sender side only, and the exact condition is called a "PR-SCTP policy". This patchset implements 3 policies: 1. Timed Reliability: This allows the sender to specify a timeout for a user message after which the SCTP stack abandons the user message. 2. Limited Retransmission Policy: Allows limitation of the number of retransmissions. 3. Priority Policy: Allows removal of lower-priority messages if space for higher-priority messages is needed in the send buffer. Patch 1-3 add some sockopts in sctp to set/get pr_sctp policy status. Patch 4-6 implement these 3 policies one by one. ==================== Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11sctp: implement prsctp PRIO policyXin Long
prsctp PRIO policy is a policy to abandon lower priority chunks when asoc doesn't have enough snd buffer, so that the current chunk with higher priority can be queued successfully. Similar to TTL/RTX policy, we will set the priority of the chunk to prsctp_param with sinfo->sinfo_timetolive in sctp_set_prsctp_policy(). So if PRIO policy is enabled, msg->expire_at won't work. asoc->sent_cnt_removable will record how many chunks can be checked to remove. If priority policy is enabled, when the chunk is queued into the out_queue, we will increase sent_cnt_removable. When the chunk is moved to abandon_queue or dequeue and free, we will decrease sent_cnt_removable. In sctp_sendmsg, we will check if there is enough snd buffer for current msg and if sent_cnt_removable is not 0. Then try to abandon chunks in sctp_prune_prsctp when sendmsg from the retransmit/transmited queue, and free chunks from out_queue in right order until the abandon+free size > msg_len - sctp_wfree. For the abandon size, we have to wait until it sends FORWARD TSN, receives the sack and the chunks are really freed. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11sctp: implement prsctp RTX policyXin Long
prsctp RTX policy is a policy to abandon chunks when they are retransmitted beyond the max count. This patch uses sent_count to count how many times one chunk has been sent, and prsctp_param is the max rtx count, which is from sinfo->sinfo_timetolive in sctp_set_prsctp_policy(). So similar to TTL policy, if RTX policy is enabled, msg->expire_at won't work. Then in sctp_chunk_abandoned, this patch checks if chunk->sent_count is bigger than chunk->prsctp_param to abandon this chunk. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11sctp: implement prsctp TTL policyXin Long
prsctp TTL policy is a policy to abandon chunks when they expire at the specific time in local stack. It's similar with expires_at in struct sctp_datamsg. This patch uses sinfo->sinfo_timetolive to set the specific time for TTL policy. sinfo->sinfo_timetolive is also used for msg->expires_at. So if prsctp_enable or TTL policy is not enabled, msg->expires_at still works as before. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11sctp: add SCTP_PR_ASSOC_STATUS on sctp sockoptXin Long
This patch adds SCTP_PR_ASSOC_STATUS to sctp sockopt, which is used to dump the prsctp statistics info from the asoc. The prsctp statistics includes abandoned_sent/unsent from the asoc. abandoned_sent is the count of the packets we drop packets from retransmit/transmited queue, and abandoned_unsent is the count of the packets we drop from out_queue according to the policy. Note: another option for prsctp statistics dump described in rfc is SCTP_PR_STREAM_STATUS, which is used to dump the prsctp statistics info from each stream. But by now, linux doesn't yet have per stream statistics info, it needs rfc6525 to be implemented. As the prsctp statistics for each stream has to be based on per stream statistics, we will delay it until rfc6525 is done in linux. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11sctp: add SCTP_DEFAULT_PRINFO into sctp sockoptXin Long
This patch adds SCTP_DEFAULT_PRINFO to sctp sockopt. It is used to set/get sctp Partially Reliable Policies' default params, which includes 3 policies (ttl, rtx, prio) and their values. Still, if we set policy params in sndinfo, we will use the params of sndinfo against chunks, instead of the default params. In this patch, we will use 5-8bit of sp/asoc->default_flags to store prsctp policies, and reuse asoc->default_timetolive to store their values. It means if we enable and set prsctp policy, prior ttl timeout in sctp will not work any more. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11sctp: add SCTP_PR_SUPPORTED on sctp sockoptXin Long
According to section 4.5 of rfc7496, prsctp_enable should be per asoc. We will add prsctp_enable to both asoc and ep, and replace the places where it used net.sctp->prsctp_enable with asoc->prsctp_enable. ep->prsctp_enable will be initialized with net.sctp->prsctp_enable, and asoc->prsctp_enable will be initialized with ep->prsctp_enable. We can also modify it's value through sockopt SCTP_PR_SUPPORTED. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11Bluetooth: hci_intel: Remove LPM enabling from setup procedureLoic Poulain
LPM can be enabled via a DDC write command at specific DDC ID. As any other DDC value, this is up to the DDC config file to include (or not) the low power mode configuration. Signed-off-by: Loic Poulain <loic.poulain@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-11Revert "net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettings"Philippe Reynes
This reverts commit 4386f5662e63 ("net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettings") This patch is wrong, the function phy_ethtool_{get|set}_link_ksettings don't check if the device is running, but the driver bcmgenet need this check. The function {get|set}_settings need to access the mdio bus, and this bus may only be used when the device is running. Otherwise, the clock is disable and a mdio access will fail. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11Merge branch 'b53-nsp-switch'David S. Miller
Florian Fainelli says: ==================== net: dsa: b53: Add Broadcom NSP switch support This patch series updates the B53 driver to support Broadcom's Northstar Plus Soc integrated switch. Unlike the version of the core present in BCM5301x/Northstar, we cannot read the full chip id of the switch, so we need to get the information about our switch id from Device Tree. Other than that, this is a regular Broadcom Ethernet switch which is register compatible for all practical purposes with the existing switch driver. Since DSA requires a working CPU Ethernet MAC driver this depends on Jon Mason's AMAC/BGMAC driver changes to support NSP. Board specific changes depend on patches present in Broadcom's ARM SoC branches and will be posted in a short while. ==================== Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switchFlorian Fainelli
Update the SRAB, core driver and binding document to support the BCM585xx/586xx/88312 integrated switch (Northstar Plus SoCs family). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11net: dsa: b53: Allow SRAB driver to specify platform dataFlorian Fainelli
For Northstart Plus SoCs, we cannot detect the switch because only the revision information is provied in the Management page, instead, rely on Device Tree to tell us the chip id, and pass it down using the b53_platform_data structure. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11udp: prevent bugcheck if filter truncates packet too muchMichal Kubeček
If socket filter truncates an udp packet below the length of UDP header in udpv6_queue_rcv_skb() or udp_queue_rcv_skb(), it will trigger a BUG_ON in skb_pull_rcsum(). This BUG_ON (and therefore a system crash if kernel is configured that way) can be easily enforced by an unprivileged user which was reported as CVE-2016-6162. For a reproducer, see http://seclists.org/oss-sec/2016/q3/8 Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Reported-by: Marco Grassi <marco.gra@gmail.com> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11bnxt_en: initialize rc to zero to avoid returning garbageColin Ian King
rc is not initialized so it can contain garbage if it is not set by the call to bnxt_read_sfp_module_eeprom_info. Ensure garbage is not returned by initializing rc to 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11x86/tsc: Enumerate BXT tsc_khz via CPUIDLen Brown
Hard code the BXT crystal clock (aka ART - Always Running Timer) to 19.200 MHz, and use CPUID leaf 0x15 to determine the BXT TSC frequency. Use tsc_khz to sanity check BXT cpu_khz, which can be erroneous in some configurations. (I simplified the original patch from Bin Gao.) Original-From: Bin Gao <bin.gao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/bf4e7c175acd6d09719c47c319b10ff1f0627ff8.1466138954.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-11x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUIDLen Brown
Skylake CPU base-frequency and TSC frequency may differ by up to 2%. Enumerate CPU and TSC frequencies separately, allowing cpu_khz and tsc_khz to differ. The existing CPU frequency calibration mechanism is unchanged. However, CPUID extensions are preferred, when available. CPUID.0x16 is preferred over MSR and timer calibration for CPU frequency discovery. CPUID.0x15 takes precedence over CPU-frequency for TSC frequency discovery. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/b27ec289fd005833b27d694d9c2dbb716c5cdff7.1466138954.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-11x86/tsc_msr: Remove irqoff around MSR-based TSC enumerationLen Brown
Remove the irqoff/irqon around MSR-based TSC enumeration, as it is not necessary. Also rename: try_msr_calibrate_tsc() to cpu_khz_from_msr(), as that better describes what the routine does. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/a6b5c3ecd3b068175d2309599ab28163fc34215e.1466138954.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-11Merge tag 'batadv-net-for-davem-20160708' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here are a couple batman-adv bugfix patches, all by Sven Eckelmann: - Fix possible NULL pointer dereference for vlan_insert_tag (two patches) - Fix reference handling in some features, which may lead to reference leaks or invalid memory access (four patches) - Fix speedy join: DHCP packets handled by the gateway feature should be sent with 4-address unicast instead of 3-address unicast to make speedy join work. This fixes/speeds up DHCP assignment for clients which join a mesh for the first time. (one patch) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11spi: spi-sh: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar
The workqueue has a single workitem(&ss->ws) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been flushed in spi_sh_remove() to ensure that there are no pending tasks while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar
The workqueue "wk" serves as a queue for carrying out execution of requests. It has a single work item(&drv_data->work) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been flushed in pch_spi_free_resources() to ensure that there are no pending tasks while disconnecting the driver. Also dropped the label 'err_return' since it's not being used anymore. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11ALSA: hda - fix use-after-free after module unloadPeter Wu
register_vga_switcheroo() sets the PM ops from the hda structure which is freed later in azx_free. Make sure that these ops are cleared. Caught by KASAN, initially noticed due to a general protection fault. Fixes: 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)") Signed-off-by: Peter Wu <peter@lekensteyn.nl> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-11posix_acl: de-union a_refcount and a_rcuJeff Layton
Currently the two are unioned together, but I don't think that's safe. It looks like get_cached_acl could race with the last put in posix_acl_release. get_cached_acl calls atomic_inc_not_zero on a_refcount, but that field could have already been clobbered by call_rcu, and may no longer be zero. Fix this by de-unioning the two fields. Fixes: b8a7a3a66747 (posix_acl: Inode acl caching fixes) Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-07-11arm64: fix vdso-offsets.h dependencyKevin Brodsky
arm64/kernel/{vdso,signal}.c include vdso-offsets.h, as well as any file that includes asm/vdso.h. Therefore, vdso-offsets.h must be generated before these files are compiled. The current rules in arm64/kernel/Makefile do not actually enforce this, because even though $(obj)/vdso is listed as a prerequisite for vdso-offsets.h, this does not result in the intended effect of building the vdso subdirectory (before all the other objects). As a consequence, depending on the order in which the rules are followed, vdso-offsets.h is updated or not before arm64/kernel/{vdso,signal}.o are built. The current rules also impose an unnecessary dependency on vdso-offsets.h for all arm64/kernel/*.o, resulting in unnecessary rebuilds. This is made obvious when using make -j: touch arch/arm64/kernel/vdso/gettimeofday.S && make -j$NCPUS arch/arm64/kernel will sometimes result in none of arm64/kernel/*.o being rebuilt, sometimes all of them, or even just some of them. It is quite difficult to ensure that a header is generated before it is used with recursive Makefiles by using normal rules. Instead, arch-specific generated headers are normally built in the archprepare recipe in the arch Makefile (see for instance arch/ia64/Makefile). Unfortunately, asm-offsets.h is included in gettimeofday.S, and must therefore be generated before vdso-offsets.h, which is not the case if archprepare is used. For this reason, a rule run after archprepare has to be used. This commit adds rules in arm64/Makefile to build vdso-offsets.h during the prepare step, ensuring that vdso-offsets.h is generated before building anything. It also removes the now-unnecessary dependencies on vdso-offsets.h in arm64/kernel/Makefile. Finally, it removes the duplication of asm-offsets.h between arm64/kernel/vdso/ and include/generated/ and makes include/generated/vdso-offsets.h a target in arm64/kernel/vdso/Makefile. Cc: Will Deacon <will.deacon@arm.com> Cc: Michal Marek <mmarek@suse.com> Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-11[media] doc-rst: document ioctl LIRC_GET_SEND_MODEMauro Carvalho Chehab
Move the documentation of this ioctl from lirc_ioctl to its own file, and add a short description about the pulse mode used by IR TX. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-11Revert "arm64: Fix vdso-offsets.h dependency"Catalin Marinas
This reverts commit 90f777beb788d08300f4a1482cb4fd37a401b472. While this commit was aimed at fixing the dependencies, with a large make -j the vdso-offsets.h file is not generated, leading to build failures. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-11irqdomain: Fix irq_domain_alloc_irqs_recursive() error handlingAlexander Popov
If an irq_domain is auto-recursive and irq_domain_alloc_irqs_recursive() for its parent has returned an error, then do return and avoid calling irq_domain_free_irqs_recursive() uselessly, because: - if domain->ops->alloc() had failed for an auto-recursive irq_domain, then irq_domain_free_irqs_recursive() had already been called; - if domain->ops->alloc() had failed for a not auto-recursive irq_domain, then there is nothing to free at all. Signed-off-by: Alexander Popov <alex.popov@linux.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1467505448-2850-1-git-send-email-alex.popov@linux.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-11posix_cpu_timer: Exit early when process has been reapedAlexey Dobriyan
Variable "now" seems to be genuinely used unintialized if branch if (CPUCLOCK_PERTHREAD(timer->it_clock)) { is not taken and branch if (unlikely(sighand == NULL)) { is taken. In this case the process has been reaped and the timer is marked as disarmed anyway. So none of the postprocessing of the sample is required. Return right away. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.by Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-11[media] doc-rst: Fix LIRC_GET_FEATURES referencesMauro Carvalho Chehab
The references pointed by LIRC_GET_FEATURES ioctl are broken. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-11x86/fpu/xstate: Re-enable XSAVESYu-cheng Yu
We did not handle XSAVES instructions correctly. There were issues in converting between standard and compacted format when interfacing with user-space. These issues have been corrected. Add a WARN_ONCE() to make it clear that XSAVES supervisor states are not yet implemented. Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: H. Peter Anvin <h.peter.anvin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1468253937-40008-5-git-send-email-fenghua.yu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-11x86/fpu/xstate: Fix fpstate_init() for XRSTORSYu-cheng Yu
In XSAVES mode if fpstate_init() is used to initialize a task's extended state area, xsave.header.xcomp_bv[63] must be set. Otherwise, when the task is scheduled, a warning is triggered from copy_kernel_to_xregs(). One such test case is: setting an invalid extended state through PTRACE. When xstateregs_set() rejects the syscall and re-initializes the task's extended state area. This triggers the warning mentioned above. Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: H. Peter Anvin <h.peter.anvin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1468253937-40008-4-git-send-email-fenghua.yu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-11x86/fpu/xstate: Return NULL for disabled xstate component addressYu-cheng Yu
It is an error to request a disabled XSAVE/XSAVES component address. For that case, make __raw_xsave_addr() return a NULL and issue a warning. Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: H. Peter Anvin <h.peter.anvin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1468253937-40008-3-git-send-email-fenghua.yu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-11x86/fpu/xstate: Fix __fpu_restore_sig() for XSAVESYu-cheng Yu
When the kernel is using XSAVES compacted format, we cannot do __copy_from_user() from a signal frame, which has standard-format data. Fix it by using copyin_to_xsaves(), which converts between formats and filters out all supervisor states that we do not allow userspace to write. Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: H. Peter Anvin <h.peter.anvin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1468253937-40008-2-git-send-email-fenghua.yu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-11Revert "ACPI 2.0 / AML: Improve module level execution by moving the ↵Rafael J. Wysocki
If/Else/While execution to per-table basis" Revert commit 3d4b7ae96d81 (ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis) that enabled the execution of module-level AML after loading each table (rather than after all AML tables have been loaded), but overlooked locking issues resulting from that change. Fixes: 3d4b7ae96d81 (ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis) Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-11Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic ↵Rafael J. Wysocki
table loading" Revert commit 2f38b1b16d92 (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading) that attempted to fix a deadlock issue introduced by a previous commit, but it led to a lock ordering inconsistency that caused further problems to appear. Fixes: 2f38b1b16d92 (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-23 03:00:26 +0000