summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-05doc-rst: remove Documentation/linux_tv/conf.py fileMauro Carvalho Chehab
This file is actually not used to build the media uAPI docbook. So, remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-05doc-rst: boilerplate HTML theme customizationMarkus Heiser
Implements the minimal boilerplate for Sphinx HTML theme customization. Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-05bcache: Remove redundant block_size assignmentYijing Wang
We have assigned sb->block_size before the switch, so remove the redundant one. Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Acked-by: Eric Wheeler <bcache@lists.ewheeler.net> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05bcache: update document infoYijing Wang
There is no return in continue_at(), update the documentation. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05bcache: Remove redundant parameter for cache_alloc()Yijing Wang
Cache_sb is not used in cache_alloc, and we have copied sb info to cache->sb already, remove it. Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05nvme-loop: add a NVMe loopback host driverChristoph Hellwig
This patch implements adds nvme-loop which allows to access local devices exported as NVMe over Fabrics namespaces. This module can be useful for easy evaluation, testing and also feature experimentation. To createa nvme-loop device you need to configure the NVMe target to export a loop port (see the nvmetcli documentaton for that) and then connect to it using nvme connect-all -t loop which requires the very latest nvme-cli version with Fabrics support. Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05nvmet: add a generic NVMe targetChristoph Hellwig
This patch introduces a implementation of NVMe subsystems, controllers and discovery service which allows to export NVMe namespaces across fabrics such as Ethernet, FC etc. The implementation conforms to the NVMe 1.2.1 specification and interoperates with NVMe over fabrics host implementations. Configuration works using configfs, and is best performed using the nvmetcli tool from http://git.infradead.org/users/hch/nvmetcli.git, which also has a detailed explanation of the required steps in the README file. Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com> Signed-off-by: Anthony Knapp <anthony.j.knapp@intel.com> Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05block: Export blk_pollSagi Grimberg
The new NVMe over fabrics target will make use of this outside from a module. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05nvme: add keep-alive supportSagi Grimberg
Periodic keep-alive is a mandatory feature in NVMe over Fabrics, and optional in NVMe 1.2.1 for PCIe. This patch adds periodic keep-alive sent from the host to verify that the controller is still responsive and vice-versa. The keep-alive timeout is user-defined (with keep_alive_tmo connection parameter) and defaults to 5 seconds. In order to avoid a race condition where the host sends a keep-alive competing with the target side keep-alive timeout expiration, the host adds a grace period of 10 seconds when publishing the keep-alive timeout to the target. In case a keep-alive failed (or timed out), a transport specific error recovery kicks in. For now only NVMe over Fabrics is wired up to support keep alive, but we can add PCIe support easily once controllers actually supporting it become available. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Steve Wise <swise@chelsio.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05nvme.h: Add keep-alive opcode and identify controller attributeSagi Grimberg
KAS: keep-alive support and granularity of kato in units of 100 ms nvme_admin_keep_alive opcode: 0x18 Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05nvme-fabrics: add a generic NVMe over Fabrics libraryChristoph Hellwig
The NVMe over Fabrics library provides an interface for both transports and the nvme core to handle fabrics specific commands and attributes independent of the underlying transport. In addition, the fabrics library adds a misc device interface that allow actually creating a fabrics controller, as we can't just autodiscover it like in the PCI case. The nvme-cli utility has been enhanced to use this interface to support fabric connect and discovery. Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com>, Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>, Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05nvme.h: add NVMe over Fabrics definitionsChristoph Hellwig
The NVMe over Fabrics specification defines a protocol interface and related extensions to NVMe that enable operation over network protocols. The NVMe over Fabrics specification has an NVMe Transport binding for each NVMe Transport. This patch adds the fabrics related definitions: - fabric specific command set and error codes - transport addressing and binding definitions - fabrics sgl extensions - controller identification fabrics enhancements - discovery log page definition Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05nvme: add fabrics sysfs attributesMing Lin
- delete_controller: This attribute allows to delete a controller. A driver is not obligated to support it (pci doesn't) so it is created only if the driver supports it. The new fabrics drivers will support it (essentialy a disconnect operation). Usage: echo > /sys/class/nvme/nvme0/delete_controller - subsysnqn: This attribute shows the subsystem nqn of the configured device. If a driver does not implement the get_subsysnqn method, the file will not appear in sysfs. - transport: This attribute shows the transport name. Added a "name" field to struct nvme_ctrl_ops. For loop, cat /sys/class/nvme/nvme0/transport loop For RDMA, cat /sys/class/nvme/nvme0/transport rdma For PCIe, cat /sys/class/nvme/nvme0/transport pcie - address: This attributes shows the controller address. The fabrics drivers that will implement get_address can show the address of the connected controller. example: cat /sys/class/nvme/nvme0/address traddr=192.168.2.2,trsvcid=1023 Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05nvme: Modify and export sync command submission for fabricsChristoph Hellwig
NVMe over fabrics will use __nvme_submit_sync_cmd in the the transport and require a few tweaks to it. For that we export it and add a few more paramters: 1. allow passing a queue ID to the block layer For the NVMe over Fabrics connect command we need to able to specify a queue ID that we want to send the command on. Add a qid parameter to the relevant functions to enable this behavior. 2. allow submitting at_head commands In cases where we want to (re)connect to a controller where we have inflight queued commands we want to first connect and only then allow the other queued commands to be kicked. This will prevents failures in controller resets and reconnects. 3. allow passing flags to blk_mq_allocate_request Both for Fabrics connect the the keep-alive feature in NVMe 1.2.1 we want to be able to use reserved requests. Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05nvme: allow transitioning from NEW to LIVE stateChristoph Hellwig
For Fabrics we're not going through an intermediate reset state (at least for now). Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05blk-mq: add blk_mq_alloc_request_hctxMing Lin
For some protocols like NVMe over Fabrics we need to be able to send initialization commands to a specific queue. Based on an earlier patch from Christoph Hellwig <hch@lst.de>. Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> [hch: disallow sleeping allocation, req_op fixes] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05r8152: fix runtime function for RTL8152hayeswang
The RTL8152 doesn't have U1U2 and U2P3 features, so use different runtime functions for RTL812 and RTL8153 by adding autosuspend_en() to rtl_ops. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: hns: fix return value check in hns_dsaf_get_cfg()Wei Yongjun
In case of error, function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05Revert "gpio: gpiolib-of: Allow compile testing"Linus Walleij
This reverts commit 1e4a80640338924b9f9fd7a121ac31d08134410a. This creates more problems than it solves right now. Compile testing needs to go in with patches fixing the problems it uncovers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-05Merge branch 'mlxsw-ipv4-unicast-routing'David S. Miller
Jiri Pirko says: ==================== mlxsw: Implement IPV4 unicast routing This patchset enables IPv4 unicast routing in the Mellanox Spectrum ASIC switch driver. This builds upon the work that was done by a couple of previous patchsets. Patches 1,2,6 add a couple of dependencies outside the driver. Namely, the ability to propagate ndo_neigh_construct()/destroy() through stacked devices and a notification whenever DELAY_PROBE_TIME changes. When propagated down, the ndos allow drivers to add and remove neighbour entries from their private neighbour table. The DELAY_PROBE_TIME notification gives drivers the ability to correctly configure their polling interval for neighbour activity, so that active neighbour won't be marked as STALE. Patches 3-5,7-8 add the neighbour offloading infrastructure, where patch 7 uses the DELAY_PROBE_TIME notification in order to correctly configure the device's polling interval. Patch 8 finally programs neighbours to the device's table based on NEIGH_UPDATE notifications, so that directly connected routes can be used. Patches 9-16 build upon the previous patches and extend the router with remote routes (nexthop) support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: Add the unresolved next-hops probesYotam Gigi
Now, the driver sends arp probes for all unresolved neighbours that are currently a nexthop for some route on the system. The job is set periodically every 5 seconds. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Add the nexthop neigh activity updateYotam Gigi
For nexthop neighbours we need to make kernel to think there is a traffic flowing to them preventing it from going to stale state. Otherwise kernel would stale it and eventually the neigh would be removed from HW and nexthop as well. That would reduce ECMP group in HW. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Implement next-hop routingJiri Pirko
Implement next-hop routing offload including ECMP. To make it possible, introduce next-hop group entity. This entity keeps track of resolved neighbours and updates HW adjacency table accordingly. Note that HW next-hops are stored in this adjacency table, in form of MAC. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: reg: Add Router Algorithmic LPM ECMP Update RegisterJiri Pirko
The RALEU register is used to mass update remote action adjacency index and ecmp size. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: reg: Add Router Adjacency Table registerYotam Gigi
The RATR register is used to configure the Router Adjacency (next-hop) Table. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: Introduce simplistic KVD linear area managerJiri Pirko
This is a very simple manager for KVD linear area. Currently, the allocator will either allocate a single entry from pre-defined sub-area, or in case more than one entry is needed, it will allocate 32-entry chunk in other pre-defined sub-area. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum: Define sizes of KVD areasJiri Pirko
Override the defaults and define the area sizes ourselves. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: Add KVD sizes configuration into profileJiri Pirko
Up until now we only used hash-based tables in the device, but we are going to use the linear table for remote routes adjacency lists. Add the configuration fields that control the size of the linear table. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Offload neighbours based on NUD state changeYotam Gigi
Listen to any NEIGH_UPDATE events sent and program the device accordingly. If NUD state is VALID and neighbour isn't yet offloaded, then program it into the device's table. Otherwise, just edit its parameters. If NUD state machine transitioned neighbour out of VALID state and it's present in the device's table, then remove it. Note that the device is programmed in delayed work, as the netevent notification chain is atomic and prevents us from going to sleep. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Periodically update the kernel's neigh tableYotam Gigi
As previously explained, the driver should periodically poll the device for neighbours activity according to the configured DELAY_PROBE_TIME. This will prevent active neighbours from staying in STALE state for long periods of time. During init configure the polling interval according to the DELAY_PROBE_TIME used in the default table. In addition, register a netevent notification block, so that the interval is updated whenever DELAY_PROBE_TIME changes. Using the computed interval schedule a delayed work, which will update the kernel via neigh_event_send() on any active neighbour since the last delayed work. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05neigh: Send a notification when DELAY_PROBE_TIME changesIdo Schimmel
When the data plane is offloaded the traffic doesn't go through the networking stack. Therefore, after first resolving a neighbour the NUD state machine will transition it from REACHABLE to STALE until it's finally deleted by the garbage collector. To prevent such situations the offloading driver should notify the NUD state machine on any neighbours that were recently used. The driver's polling interval should be set so that the NUD state machine can function as if the traffic wasn't offloaded. Currently, there are no in-tree drivers that can report confirmation for a neighbour, but only 'used' indication. Therefore, the polling interval should be set according to DELAY_FIRST_PROBE_TIME, as a neighbour will transition from REACHABLE state to DELAY (instead of STALE) if "a packet was sent within the last DELAY_FIRST_PROBE_TIME seconds" (RFC 4861). Send a netevent whenever the DELAY_FIRST_PROBE_TIME changes - either via netlink or sysctl - so that offloading drivers can correctly set their polling interval. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: reg: Add Router Algorithmic LPM Unicast Host Table Dump registerYotam Gigi
The RAUHTD register allows dumping entries from the Router Unicast Host Table. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: reg: Add Router Algorithmic LPM Unicast Host Table registerYotam Gigi
The RAUHT register is used to configure and query the Unicast Host Table in devices that implement the Algorithmic LPM. In other words, it is used to configure neighbour entries in the device. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Add private neigh tableJiri Pirko
We need to hold some private data for every neigh entry. It would be possible to do it using neigh_priv_len/ndo_neigh_construct/ ndo_neigh_destroy however only for the port device itself. That would not work for stacked devices like bridge/team/bond. So introduce a private neigh table. Hook onto ndos neigh_construct/destroy and add/remove table entry according to that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: introduce default neigh_construct/destroy ndo calls for L2 upper devicesJiri Pirko
L2 upper device needs to propagate neigh_construct/destroy calls down to lower devices. Do this by defining default ndo functions and use them in team, bond, bridge and vlan. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: add dev arg to ndo_neigh_construct/destroyJiri Pirko
As the following patch will allow upper devices to follow the call down lower devices, we need to add dev here and not rely on n->dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-06i2c: designware-pci: clarify a comment for MerrifieldAndy Shevchenko
There are more than 7 busses, but only 7 are user visible. Update comment accordingly. Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-06i2c: i801: add support of Host NotifyBenjamin Tissoires
The i801 chip can handle the Host Notify feature since ICH 3 as mentioned in http://www.intel.com/content/dam/doc/datasheet/82801ca-io-controller-hub-3-datasheet.pdf Enable the functionality unconditionally and propagate the alert on each notification. With a T440s and a Synaptics touchpad that implements Host Notify, the payload data is always 0x0000, so I am not sure if the device actually sends the payload or if there is a problem regarding the implementation. Tested-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-06i2c: mux: reg: wrong condition checked for of_address_to_resource return valueLukasz Gemborowski
of_address_to_resource return 0 on successful call but devm_ioremap_resource is called only if it returns non-zero value Signed-off-by: Lukasz Gemborowski <lukasz.gemborowski@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-07-06i2c: tegra: Correct error path in probeJon Hunter
Commit 497fbe24987b ("i2c: tegra: enable multi master mode for tegra210") enables the Tegra I2C 'div_clk' for adapters using the multi-master mode during the device probe. Although the probe error path was updated to disable the clock on probe failure, there is one place after calling tegra_i2c_init() where the clock will not be disabled on failure. Correct the error path so that the 'div_clk' is disabled if calling tegra_i2c_init() fails. Fixes: 497fbe24987b ("i2c: tegra: enable multi master mode for tegra210") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-05crypto: qat - Add RSA CRT modeSalvatore Benedetto
Extend qat driver to use RSA CRT mode when all CRT related components are present in the private key. Simplify code in qat_rsa_setkey by adding qat_rsa_clear_ctx. Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05crypto: testmgr - Add 4K private key to RSA testvectorSalvatore Benedetto
Key generated with openssl. It also contains all fields required for testing CRT mode Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05crypto: rsa - Store rest of the private key componentsSalvatore Benedetto
When parsing a private key, store all non-optional fields. These are required for enabling CRT mode for decrypt and verify Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05crypto: qat - Use alternative reset methods depending on the specific deviceConor McLoughlin
Different product families will use FLR or SBR. Virtual Function devices have no reset method. Signed-off-by: Conor McLoughlin <conor.mcloughlin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05crypto: bfin_crc - Simplify use of devm_ioremap_resourceAmitoj Kaur Chawla
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05crypto: caam - add support for RSA algorithmTudor Ambarus
Add RSA support to caam driver. Initial author is Yashpal Dutta <yashpal.dutta@freescale.com>. Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05crypto: testmgr - Set err before proceedingSalvatore Benedetto
Report correct error in case of failure Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05crypto: qat - Switch to new rsa_helper functionsSalvatore Benedetto
Drop all asn1 related code and use the new rsa_helper functions rsa_parse_[pub|priv]_key for parsing the key Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05crypto: powerpc - Add POWER8 optimised crc32cAnton Blanchard
Use the vector polynomial multiply-sum instructions in POWER8 to speed up crc32c. This is just over 41x faster than the slice-by-8 method that it replaces. Measurements on a 4.1 GHz POWER8 show it sustaining 52 GiB/sec. A simple btrfs write performance test: dd if=/dev/zero of=/mnt/tmpfile bs=1M count=4096 sync is over 3.7x faster. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05powerpc: define FUNC_START/FUNC_ENDAnton Blanchard
gcc provides FUNC_START/FUNC_END macros to help with creating assembly functions. Mirror these in the kernel so we can more easily share code between userspace and the kernel. FUNC_END is just a stub since we don't currently annotate the end of kernel functions. It might make sense to do a wholesale search and replace, but for now just create a couple of defines. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-09-28 07:15:43 +0000