| Age | Commit message (Collapse) | Author |
|---|
|
We triggered the following crash in syzkaller tests:
BUG: Bad page state in process syz.7.38 pfn:1eff3
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3
flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff)
raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_unref_page_prepare+0x401/0x500
free_unref_page+0x6d/0x1b0
uprobe_write_opcode+0x460/0x8e0
install_breakpoint.part.0+0x51/0x80
register_for_each_vma+0x1d9/0x2b0
__uprobe_register+0x245/0x300
bpf_uprobe_multi_link_attach+0x29b/0x4f0
link_create+0x1e2/0x280
__sys_bpf+0x75f/0xac0
__x64_sys_bpf+0x1a/0x30
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1
The following syzkaller test case can be used to reproduce:
r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8)
write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10)
r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0)
mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0)
r5 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20})
r6 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140))
ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2})
ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}})
r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94)
bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40)
The cause is that zero pfn is set to the PTE without increasing the RSS
count in mfill_atomic_pte_zeropage() and the refcount of zero folio does
not increase accordingly. Then, the operation on the same pfn is performed
in uprobe_write_opcode()->__replace_page() to unconditional decrease the
RSS count and old_folio's refcount.
Therefore, two bugs are introduced:
1. The RSS count is incorrect, when process exit, the check_mm() report
error "Bad rss-count".
2. The reserved folio (zero folio) is freed when folio->refcount is zero,
then free_pages_prepare->free_page_is_bad() report error
"Bad page state".
There is more, the following warning could also theoretically be triggered:
__replace_page()
-> ...
-> folio_remove_rmap_pte()
-> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio)
Considering that uprobe hit on the zero folio is a very rare case, just
reject zero old folio immediately after get_user_page_vma_remote().
[ mingo: Cleaned up the changelog ]
Fixes: 7396fa818d62 ("uprobes/core: Make background page replacement logic account for rss_stat counters")
Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250224031149.1598949-1-tongtiangen@huawei.com
|
|
The sorting of VMAs by size in commit 7d442a33bfe8 ("binfmt_elf: Dump
smaller VMAs first in ELF cores") breaks elfutils[1]. Instead, sort
based on the setting of the new sysctl, core_sort_vma, which defaults
to 0, no sorting.
Reported-by: Michael Stapelberg <michael@stapelberg.ch>
Closes: https://lore.kernel.org/all/20250218085407.61126-1-michael@stapelberg.de/ [1]
Fixes: 7d442a33bfe8 ("binfmt_elf: Dump smaller VMAs first in ELF cores")
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Some tools like KGraphViewer interpret the "ON" nodes not having an
explicitly set fill colour as them being entirely black, which obscures
the text on them and looks funny. In fact, I thought they were off for
the longest time. Comparing to the output of the `dot` tool, I assume
they are supposed to be white.
Instead of speclawyering over who's in the wrong and must immediately
atone for their wickedness at the altar of RFC2119, just be explicit
about it, set the fillcolor to white, and nobody gets confused.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250221-dapm-graph-node-colour-v1-1-514ed0aa7069@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If stream names of DAI driver are duplicated there'll be warnings when
machine driver tries to add widgets on a route:
[ 8.831335] fsl-asoc-card sound-wm8960: ASoC: sink widget CPU-Playback overwritten
[ 8.839917] fsl-asoc-card sound-wm8960: ASoC: source widget CPU-Capture overwritten
Use different stream names to avoid such warnings.
DAI names in AUDMIX are also updated accordingly.
Fixes: 15c958390460 ("ASoC: fsl_sai: Add separate DAI for transmitter and receiver")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20250217010437.258621-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in
perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same
perf_event_pmu_context, but not in the same order.
The problem is that the order of pmu_ctx_list for the parent is impacted by
the time when an event/PMU is added. While the order for a child is
impacted by the event order in the pinned_groups and flexible_groups. So
the order of pmu_ctx_list in the parent and child may be different.
To fix this problem, insert the perf_event_pmu_context to its proper place
after iteration of the pmu_ctx_list.
The follow testcase can trigger above warning:
# perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out &
# perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out
test.c
void main() {
int count = 0;
pid_t pid;
printf("%d running\n", getpid());
sleep(30);
printf("running\n");
pid = fork();
if (pid == -1) {
printf("fork error\n");
return;
}
if (pid == 0) {
while (1) {
count++;
}
} else {
while (1) {
count++;
}
}
}
The testcase first opens an LBR event, so it will allocate task_ctx_data,
and then open tracepoint and software events, so the parent context will
have 3 different perf_event_pmu_contexts. On inheritance, child ctx will
insert the perf_event_pmu_context in another order and the warning will
trigger.
[ mingo: Tidied up the changelog. ]
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250122073356.1824736-1-luogengkun@huaweicloud.com
|
|
into HEAD
KVM/riscv fixes for 6.14, take #1
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for
unsupported function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt
via IMSIC guest file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #3
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2
and not mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly
race that would lead to running with an unallocated VMID.
|
|
The perf_iterate_ctx() function performs RCU list traversal but
currently lacks RCU read lock protection. This causes lockdep warnings
when running perf probe with unshare(1) under CONFIG_PROVE_RCU_LIST=y:
WARNING: suspicious RCU usage
kernel/events/core.c:8168 RCU-list traversed in non-reader section!!
Call Trace:
lockdep_rcu_suspicious
? perf_event_addr_filters_apply
perf_iterate_ctx
perf_event_exec
begin_new_exec
? load_elf_phdrs
load_elf_binary
? lock_acquire
? find_held_lock
? bprm_execve
bprm_execve
do_execveat_common.isra.0
__x64_sys_execve
do_syscall_64
entry_SYSCALL_64_after_hwframe
This protection was previously present but was removed in commit
bd2756811766 ("perf: Rewrite core context handling"). Add back the
necessary rcu_read_lock()/rcu_read_unlock() pair around
perf_iterate_ctx() call in perf_event_exec().
[ mingo: Use scoped_guard() as suggested by Peter ]
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250117-fix_perf_rcu-v1-1-13cb9210fc6a@debian.org
|
|
The ES8328 codec driver, which is also used for the ES8388 chip that
appears to have an identical register map, claims that the output can
either take the route from DAC->Mixer->Output or through DAC->Output
directly. To the best of what I could find, this is not true, and
creates problems.
Without DACCONTROL17 bit index 7 set for the left channel, as well as
DACCONTROL20 bit index 7 set for the right channel, I cannot get any
analog audio out on Left Out 2 and Right Out 2 respectively, despite the
DAPM routes claiming that this should be possible. Furthermore, the same
is the case for Left Out 1 and Right Out 1, showing that those two don't
have a direct route from DAC to output bypassing the mixer either.
Those control bits toggle whether the DACs are fed (stale bread?) into
their respective mixers. If one "unmutes" the mixer controls in
alsamixer, then sure, the audio output works, but if it doesn't work
without the mixer being fed the DAC input then evidently it's not a
direct output from the DAC.
ES8328/ES8388 are seemingly not alone in this. ES8323, which uses a
separate driver for what appears to be a very similar register map,
simply flips those two bits on in its probe function, and then pretends
there is no power management whatsoever for the individual controls.
Fair enough.
My theory as to why nobody has noticed this up to this point is that
everyone just assumes it's their fault when they had to unmute an
additional control in ALSA.
Fix this in the es8328 driver by removing the erroneous direct route,
then get rid of the playback switch controls and have those bits tied to
the mixer's widget instead, which until now had no register to play
with.
Fixes: 567e4f98922c ("ASoC: add es8328 codec driver")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20250222-es8328-route-bludgeoning-v1-1-99bfb7fb22d9@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
Nsfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pidfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When the kernel is compiled without LED framework support the
rtl8366rb fails to build like this:
rtl8366rb.o: in function `rtl8366rb_setup_led':
rtl8366rb.c:953:(.text.unlikely.rtl8366rb_setup_led+0xe8):
undefined reference to `led_init_default_state_get'
rtl8366rb.c:980:(.text.unlikely.rtl8366rb_setup_led+0x240):
undefined reference to `devm_led_classdev_register_ext'
As this is constantly coming up in different randconfig builds,
bite the bullet and create a separate file for the offending
code, split out a header with all stuff needed both in the
core driver and the leds code.
Add a new bool Kconfig option for the LED compile target, such
that it depends on LEDS_CLASS=y || LEDS_CLASS=RTL8366RB
which make LED support always available when LEDS_CLASS is
compiled into the kernel and enforce that if the LEDS_CLASS
is a module, then the RTL8366RB driver needs to be a module
as well so that modprobe can resolve the dependencies.
Fixes: 32d617005475 ("net: dsa: realtek: add LED drivers for rtl8366rb")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502070525.xMUImayb-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are several issues existed in start_xmit():
- Transmitted packets need to be freed before sending a packet, this
introduces delay and increases the average packets transmit
time. This also increase the time that spent in holding the TX lock.
- Notification is enabled after free_old_xmit_skbs() which will
introduce unnecessary interrupts if TX notification happens on the
same CPU that is doing the transmission now (actually, virtio-net
driver are optimized for this case).
So this patch tries to avoid those issues by not cleaning transmitted
packets in start_xmit() when TX NAPI is enabled and disable
notifications even more aggressively. Notification will be since the
beginning of the start_xmit(). But we can't enable delayed
notification after TX is stopped as we will lose the
notifications. Instead, the delayed notification needs is enabled
after the virtqueue is kicked for best performance.
Performance numbers:
1) single queue 2 vcpus guest with pktgen_sample03_burst_single_flow.sh
(burst 256) + testpmd (rxonly) on the host:
- When pinning TX IRQ to pktgen VCPU: split virtqueue PPS were
increased 55% from 6.89 Mpps to 10.7 Mpps and 32% TX interrupts were
eliminated. Packed virtqueue PPS were increased 50% from 7.09 Mpps to
10.7 Mpps, 99% TX interrupts were eliminated.
- When pinning TX IRQ to VCPU other than pktgen: split virtqueue PPS
were increased 96% from 5.29 Mpps to 10.4 Mpps and 45% TX interrupts
were eliminated; Packed virtqueue PPS were increased 78% from 6.12
Mpps to 10.9 Mpps and 99% TX interrupts were eliminated.
2) single queue 1 vcpu guest + vhost-net/TAP on the host: single
session netperf from guest to host shows 82% improvement from
31Gb/s to 58Gb/s, %stddev were reduced from 34.5% to 1.9% and 88%
of TX interrupts were eliminated.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Revert one cleanup which turned out to eat too much stack space"
* tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Allocate temporary client dynamically
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Have qcom_edac use the correct interrupt enable register to configure
the RAS interrupt lines
* tag 'edac_urgent_for_v6.14_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/qcom: Correct interrupt enable register configuration
|
|
syzbot reports an issue that turns out to be caused by the fact that the
efivarfs PM notifier may be invoked before the efivarfs_fs_info::sb
field is populated, resulting in a NULL deference.
So defer the registration until efivarfs_fill_super() is invoked.
Reported-by: syzbot+00d13e505ef530a45100@syzkaller.appspotmail.com
Tested-by: syzbot+00d13e505ef530a45100@syzkaller.appspotmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
According to the UEFI Common Platform Error Record appendix, the
processor context information structure is a variable length structure,
but "is padded with zeros if the size is not a multiple of 16 bytes".
Currently this isn't honoured, causing all but the first structure to
be garbage when printed. Thus align the size to be a multiple of 16.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
According to the UEFI Common Platform Error Record appendix, the
IA32/X64 Processor Context Information Structure is a variable length
structure, but "is padded with zeros if the size is not a multiple
of 16 bytes".
Currently this isn't honoured, causing all but the first structure to
be garbage when printed. Thus align the size to be a multiple of 16.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
While using nvme target with use_srq on, below kernel panic is noticed.
[ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514)
[ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
..
[ 566.393799] <TASK>
[ 566.393807] ? __die_body+0x1a/0x60
[ 566.393823] ? die+0x38/0x60
[ 566.393835] ? do_trap+0xe4/0x110
[ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393881] ? do_error_trap+0x7c/0x120
[ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393911] ? exc_divide_error+0x34/0x50
[ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393939] ? asm_exc_divide_error+0x16/0x20
[ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re]
[ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re]
[ 566.394057] ? srso_return_thunk+0x5/0x5f
[ 566.394068] ? __init_swait_queue_head+0x4a/0x60
[ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core]
[ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma]
[ 566.394174] ? lock_release+0x22c/0x3f0
[ 566.394187] ? srso_return_thunk+0x5/0x5f
Page size and shift info is set only for the user space SRQs.
Set page size and page shift for kernel space SRQs also.
Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1740237621-29291-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Missing trailing newlines can lead to incomplete log lines that do not
appear properly in dmesg or in console output.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Change POOL_NEXT_SIZE define value from 0 to BIT(30), since this define
is used to request the available maximum sized flow table, and zero doesn't
make sense for it, whereas some places in the driver use zero explicitly
expecting the smallest table size possible but instead due to this
define they end up allocating the biggest table size unawarely.
In addition move the definition to "include/linux/mlx5/fs.h" to expose the
define to IB driver as well, while appropriately renaming it.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219085808.349923-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add new error value for trust lockdown in health syndrome enum.
Also, include the offset for crr bit in the health buffer layout.
These changes prepare for downstream patches that update health
event handling.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219085808.349923-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When there is a failure during bind QP, the cleanup flow destroys the
counter regardless if it is the one that created it or not, which is
problematic since if it isn't the one that created it, that counter could
still be in use.
Fix that by destroying the counter only if it was created during this call.
Fixes: 45842fc627c7 ("IB/mlx5: Support statistic q counter configuration")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://patch.msgid.link/25dfefddb0ebefa668c32e06a94d84e3216257cf.1740033937.git.leon@kernel.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The simple-audio-card's microphone widget currently connects to the
headphone jack. Routing the microphone input to the microphone jack
allows for independent operation of the microphone and headphones.
This resolves the following boot-time kernel log message, which
indicated a conflict when the microphone and headphone functions were
not separated:
debugfs: File 'Headphone Jack' in directory 'dapm' already present!
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The simple-audio-card's microphone widget currently connects to the
headphone jack. Routing the microphone input to the microphone jack
allows for independent operation of the microphone and headphones.
This resolves the following boot-time kernel log message, which
indicated a conflict when the microphone and headphone functions were
not separated:
debugfs: File 'Headphone Jack' in directory 'dapm' already present!
Fixes: 874958916844 ("arm64: dts: freescale: verdin-imx8mp: dahlia: add sound card")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Unregister the cpufreq device and soc device when resource unwinding,
otherwise there will be warning when do removing test:
sysfs: cannot create duplicate filename '/devices/platform/imx-cpufreq-dt'
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.13.0-rc1-next-20241204
Hardware name: NXP i.MX8MPlus EVK board (DT)
Fixes: 9cc832d37799 ("soc: imx8m: Probe the SoC driver as platform driver")
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
- Fix potential null pointer dereference
* tag 'v6.14-rc3-smb3-client-fix-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Add check for next_buffer in receive_encrypted_standard()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix AVX-VNNI CPU feature dependency bug triggered via the 'noxsave'
boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
* tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs: arch/x86/sva: Fix two grammar errors under Background and FAQ
x86/cpufeatures: Make AVX-VNNI depend on AVX
MAINTAINERS: Change maintainer for RDT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq fixes from Ingo Molnar:
- Fix overly spread-out RSEQ concurrency ID allocation pattern that
regressed certain workloads
- Fix RSEQ registration syscall behavior on -EFAULT errors when
CONFIG_DEBUG_RSEQ=y (This debug option is disabled on most
distributions)
* tag 'sched-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix rseq registration with CONFIG_DEBUG_RSEQ
sched: Compact RSEQ concurrency IDs with reduced threads and affinity
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Fix x86 Intel Lion Cove CPU event constraints, and fix uprobes
debug/error printk output pointer-value verbosity"
* tag 'perf-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix event constraints for LNC
uprobes: Don't use %pK through printk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Fix miscellaneous irqchip bugs"
* tag 'irq-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom-pdc: Workaround hardware register bug on X1E80100
irqchip/jcore-aic, clocksource/drivers/jcore: Fix jcore-pit interrupt request
irqchip/gic-v3: Fix rk3399 workaround when secure interrupts are enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix inline asm constraint in cmma_test_essa() to avoid potential ESSA
detection miscompilation
- Fix build failure with CONFIG_GENDWARFKSYMS by disabling purgatory
symbol exports with -D__DISABLE_EXPORTS
- Update defconfigs
* tag 's390-6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix ESSA detection
s390/purgatory: Use -D__DISABLE_EXPORTS
s390: Update defconfigs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
|
|
Load patches for which the driver carries a SHA256 checksum of the patch
blob.
This can be disabled by adding "microcode.amd_sha_check=off" on the
kernel cmdline. But it is highly NOT recommended.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
If a B.A.T.M.A.N. IV aggregated OGM was prepared, it was always assumed
that 512 bytes (BATADV_MAX_AGGREGATION_BYTES) can be transmitted. But the
outgoing MTU might be too small for these 512 bytes and the aggregation
size must be adjusted in this case. Otherwise, the aggregates will cause
unnecessary packet loss.
For now, the non-aggregated packet length is not touched.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The batadv_forw_packet->num_packets didn't store the number of packets but
the the number of packets - 1. This didn't had any effects on the actual
handling of aggregates but can easily be a source of confusion when reading
the code.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The aggregation code duplicates code which already exists in the the bitops
and bitmap helper. By switching to the bitmap helpers, operating on larger
aggregations becomes possible without touching the different portions of
the code which read/modify direct_link_flags.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The currently selected size in BATADV_MAX_AGGREGATION_BYTES (512) is chosen
such that the number of possible aggregated packets is lower than 32. This
number must be limited so that the type of
batadv_forw_packet->direct_link_flags has enough bits to represent each
packet (with the size of at least 24 bytes).
This requirement is better implemented in code instead of having it inside
a comment.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The way how the virtual interface is called inside the batman-adv source
code is not consistent. The genl headers call it meshif and the rest of the
code calls is (mostly) softif.
The genl definitions cannot be touched because they are part of the UAPI.
But the rest of the batman-adv code can be touched to have a consistent
name again.
The bulk of the renaming was done using
sed -i -e 's/soft\(-\|\_\| \|\)i\([nf]\)/mesh\1i\2/g' \
-e 's/SOFT\(-\|\_\| \|\)I\([NF]\)/MESH\1I\2/g'
and then it was adjusted slightly when proofreading the changes.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Since batman-adv is not actually depending on hardware capabilities, it has
no limit on the MTU. Only the lower hard interfaces can limit it. In case
these have an high enough MTU or fragmentation is enabled, a higher MTU
than 1500 can be enabled.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Add a device tracker to struct batadv_hard_iface to help
debugging of network device refcount imbalances.
Signed-off-by: Eric Dumazet <edumazet@google.com>
[sven@narfation.org: fix kernel-doc, adopt for softif reference]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The support for the batman-adv ring buffer for debug logs was dropped with
the removal of the debugfs filesystem. The structure storing this ring
buffer is therefore no longer needed since commit aff6f5a68b92
("batman-adv: Drop deprecated debugfs support")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
This version will contain all the (major or even only minor) changes for
Linux 6.15.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
drivers/i2c/i2c-core-base.c: In function ‘i2c_detect.isra’:
drivers/i2c/i2c-core-base.c:2544:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=]
2544 | }
| ^
Fix this by allocating the temporary client structure dynamically, as it
is a rather large structure (1216 bytes, depending on kernel config).
This is basically a revert of the to-be-fixed commit with some
checkpatch improvements.
Fixes: 735668f8e5c9 ("i2c: core: Allocate temp client on the stack in i2c_detect")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
[wsa: updated commit message, merged tags from similar patch]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Jeremy Kerr says:
====================
mctp: Add MCTP-over-USB hardware transport binding
Add an implementation of the DMTF standard DSP0283, providing an MCTP
channel over high-speed USB.
This is a fairly trivial first implementation, in that we only submit
one tx and one rx URB at a time. We do accept multi-packet transfers,
but do not yet generate them on transmit.
Of course, questions and comments are most welcome, particularly on the
USB interfaces.
v2: https://lore.kernel.org/20250212-dev-mctp-usb-v2-0-76e67025d764@codeconstruct.com.au
v1: https://lore.kernel.org/20250206-dev-mctp-usb-v1-0-81453fe26a61@codeconstruct.com.au
====================
Link: https://patch.msgid.link/20250221-dev-mctp-usb-v3-0-3353030fe9cc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an implementation for DMTF DSP0283, which defines a MCTP-over-USB
transport. As per that spec, we're restricted to full speed mode,
requiring 512-byte transfers.
Each MCTP-over-USB interface is a peer-to-peer link to a single MCTP
endpoint, so no physical addressing is required (of course, that MCTP
endpoint may then bridge to further MCTP endpoints). Consequently,
interfaces will report with no lladdr data:
# mctp link
dev lo index 1 address 00:00:00:00:00:00 net 1 mtu 65536 up
dev mctpusb0 index 6 address none net 1 mtu 68 up
This is a simple initial implementation, with single rx & tx urbs, and
no multi-packet tx transfers - although we do accept multi-packet rx
from the device.
Includes suggested fixes from Santosh Puranik <spuranik@nvidia.com>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Santosh Puranik <spuranik@nvidia.com>
Link: https://patch.msgid.link/20250221-dev-mctp-usb-v3-2-3353030fe9cc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Upcoming changes will add a USB host (and later gadget) driver for the
MCTP-over-USB protocol. Add a header that provides common definitions
for protocol support: the packet header format and a few framing
definitions. Add a define for the MCTP class code, as per
https://usb.org/defined-class-codes.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250221-dev-mctp-usb-v3-1-3353030fe9cc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
