summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-05dt-bindings: mfd: brcm,cru: Add clkset sysconRafał Miłecki
CRU has a shared register that is used e.g. to control USB 2.0 PHY block access. It's a single 32 b register. Document it as syscon so it can be used with a regmap. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05dt-bindings: mfd: Add Broadcom's MISC blockRafał Miłecki
Broadcom's MISC is an MFD hardware block used on some of their SoCs like bcm63xx and bcm4908. At this point only PCIe reset is fully understood and documented. More functions may be added later. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05Merge branches 'ib-mfd-iio-touchscreen-clk-5.16', ↵Lee Jones
'ib-mfd-misc-regulator-5.16' and 'tb-mfd-from-regulator-5.16' into ibs-for-mfd-merged
2021-11-05block: use new bdev_nr_bytes() helper for blkdev_{read,write}_iter()Jens Axboe
We have new helpers for this, use them rather than the slower inode size reads. This makes the read/write path consistent with most of the rest of block as well. Signed-off-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/a72767cd-3c6d-47f7-80f4-aa025a17b2cb@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-05Merge branch 'for-5.16/xiaomi' into for-linusJiri Kosina
- proper support of Xiaomi Mi buttons (Ilya Skriblovsky)
2021-11-05Merge branch 'for-5.16/wacom' into for-linusJiri Kosina
- improvement of device management handling (Cai Huoqing, Jason Gerecke)
2021-11-05Merge branch 'for-5.16/u2fzero' into for-linusJiri Kosina
- support for new revision of the NitroKey U2F device firmware (Andrej Shadura)
2021-11-05Merge branch 'for-5.16/nintendo' into for-linusJiri Kosina
- support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J. Ogorchock)
2021-11-05Merge branch 'for-5.16/playstation' into for-linusJiri Kosina
- LED handling improvements (Roderick Colenbrander)
2021-11-05Merge branch 'for-5.16/core' into for-linusJiri Kosina
- update to handle TransducerSerialNumber2 which has been recently added to the specification (Felipe Balbi)
2021-11-05Merge branch 'for-5.16/asus' into for-linusJiri Kosina
2021-11-05Merge branch 'for-5.16/apple' into for-linusJiri Kosina
- support for 2021 Magic Keyboard (Alex Henrie) - tidle key quirk handling improvement (Alex Henrie)
2021-11-05Merge branch 'for-5.16/amd-sfh' into for-linusJiri Kosina
- code cleanups (Basavaraj Natikar, Christophe JAILLET)
2021-11-05PCI: Add ACS quirk for Pericom PI7C9X2G switchesNathan Rossi
The Pericom PI7C9X2G404/PI7C9X2G304/PI7C9X2G303 PCIe switches have an erratum for ACS P2P Request Redirect behaviour when used in the cut-through forwarding mode. The recommended work around for this issue is to use the switch in store and forward mode. The erratum results in packets being queued and not being delivered upstream, which can be observed as very poor downstream device performance and/or dropped device-generated data/interrupts. Add a fixup so that when enabling or resuming the downstream port we check if it has enabled ACS P2P Request Redirect, and if so, change the device (via the upstream port) to use the store and forward operating mode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=177471 Link: https://lore.kernel.org/r/20210910025823.196508-1-nathan@nathanrossi.com Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-04block: fix device_add_disk() kobject_create_and_add() error handlingLuis Chamberlain
Commit 83cbce957446 ("block: add error handling for device_add_disk / add_disk") added error handling to device_add_disk(), however the goto label for the kobject_create_and_add() failure did not set the return value correctly, and so we can end up in a situation where kobject_create_and_add() fails but we report success. Fixes: 83cbce957446 ("block: add error handling for device_add_disk / add_disk") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211103164023.1384821-1-mcgrof@kernel.org [axboe: fold in followup fix from Wu Bo <wubo40@huawei.com>] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04block: ensure cached plug request matches the current queueJens Axboe
If we're driving multiple devices, we could have pre-populated the cache for a different device. Ensure that the empty request matches the current queue. Fixes: 47c122e35d7e ("block: pre-allocate requests if plug is started and is a batch") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04block: move queue enter logic into blk_mq_submit_bio()Jens Axboe
Retain the old logic for the fops based submit, but for our internal blk_mq_submit_bio(), move the queue entering logic into the core function itself. We need to be a bit careful if going into the scheduler, as a scheduler or queue mappings can arbitrarily change before we have entered the queue. Have the bio scheduler mapping do that separately, it's a very cheap operation compared to actually doing merging locking and lookups. Reviewed-by: Christoph Hellwig <hch@lst.de> [axboe: update to check merge post submit_bio_checks() doing remap...] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04PCI: apple: Configure RID to SID mapper on device additionMarc Zyngier
The Apple PCIe controller doesn't directly feed the endpoint's Requester ID to the IOMMU (DART), but instead maps RIDs onto Stream IDs (SIDs). The DART and the PCIe controller must thus agree on the SIDs that are used for translation (by using the 'iommu-map' property). For this purpose, parse the 'iommu-map' property each time a device gets added, and use the resulting translation to configure the PCIe RID-to-SID mapper. Similarly, remove the translation if/when the device gets removed. This is all driven from a bus notifier which gets registered at probe time. Hopefully this is the only PCI controller driver in the whole system. [bhelgaas: squash indentation from Zhaoyu Liu <zackary.liu.pro@gmail.com>: https://lore.kernel.org/r/20211031135544.GA1616@pc] Link: https://lore.kernel.org/r/20210929163847.2807812-10-maz@kernel.org Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sven Peter <sven@svenpeter.dev>
2021-11-04iommu/dart: Exclude MSI doorbell from PCIe device IOVA rangeMarc Zyngier
The MSI doorbell on Apple HW can be any address in the low 4GB range. However, the MSI write is matched by the PCIe block before hitting the iommu. It must thus be excluded from the IOVA range that is assigned to any PCIe device. Link: https://lore.kernel.org/r/20210929163847.2807812-9-maz@kernel.org Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sven Peter <sven@svenpeter.dev>
2021-11-04PCI: apple: Implement MSI supportMarc Zyngier
Probe for the 'msi-ranges' property, and implement the MSI support in the form of the usual two-level hierarchy. Note that contrary to the wired interrupts, MSIs are shared among all the ports. Link: https://lore.kernel.org/r/20210929163847.2807812-8-maz@kernel.org Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-04PCI: apple: Add INTx and per-port interrupt supportMarc Zyngier
Add support for the per-port interrupt controller that deals with both INTx signalling and management interrupts. This allows the Link-up/Link-down interrupts to be wired, allowing the bring-up to be synchronised (and provide debug information). The framework can further be used to handle the rest of the per port events if and when necessary. Likewise, INTx signalling is implemented so that end-points can actually be used. Link: https://lore.kernel.org/r/20210929163847.2807812-7-maz@kernel.org Link: https://lore.kernel.org/r/20211004150552.3844830-1-maz@kernel.org Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-04Merge tag 'hsi-for-5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI update from Sebastian Reichel: "cmt_speech: unmark comments as kernel-doc" * tag 'hsi-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: cmt_speech: unmark comments as kernel-doc
2021-11-04Merge tag 'for-v5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Miscellaneous small fixes and improvements all over the place. Nothing stands out in particular" * tag 'for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits) power: supply: bq25890: Fix initial setting of the F_CONV_RATE field power: supply: bq25890: Fix race causing oops at boot power: supply: bq27xxx: Fix kernel crash on IRQ handler register error power: bq25890: add return values to error messages power: supply: axp288-charger: Simplify axp288_get_charger_health() power: supply: axp288-charger: Remove unnecessary is_present and is_online helpers power: supply: axp288-charger: Add depends on IOSF_MBIO to Kconfig power: supply: ab8500_bmdata: Use standard phandle dt-bindings: power: supply: ab8500: Standard monitored-battery power: supply: axp288_charger: Fix missing mutex_init() power: supply: max17042_battery: Prevent int underflow in set_soc_threshold power: supply: max17042_battery: Clear status bits in interrupt handler MAINTAINERS: power: supply: max17040: add entry with reviewers MAINTAINERS: power: supply: max17042: add entry with reviewers power: supply: max17040: fix null-ptr-deref in max17040_probe() power: supply: rt5033_battery: Change voltage values to µV power: supply: axp288-charger: Optimize register reading method dt-bindings: power: Bindings for Samsung batteries power: supply: cpcap-battery: use device_get_match_data() to simplify code power: supply: max17042_battery: fix typo in MAX17042_IAvg_empty ...
2021-11-04PCI: kirin: Allow removing the driverMauro Carvalho Chehab
Now that everything is in place at the poweroff sequence, this driver can use module_platform_driver(), which allows it to be removed. Link: https://lore.kernel.org/r/53b40494252444a9b830827922c4e3a301b8f863.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Xiaowei Song <songxiaowei@hisilicon.com>
2021-11-04PCI: kirin: De-init the dwc driverMauro Carvalho Chehab
The logic under .remove ops is missing a call to dw_pcie_host_deinit(). Add it, in order to allow the DWC core to be properly cleaned up. Link: https://lore.kernel.org/r/838621e1c84ebaac153ccd9c36ea5e1254c61ead.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Xiaowei Song <songxiaowei@hisilicon.com>
2021-11-04PCI: kirin: Disable clkreq during poweroff sequenceMauro Carvalho Chehab
The logic at kirin_pcie_gpio_request() enables some clkreq GPIO lines. Disable them during power-off. Link: https://lore.kernel.org/r/f403e590843de1a581cade2d534d34715706f54e.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Xiaowei Song <songxiaowei@hisilicon.com>
2021-11-04PCI: kirin: Move the power-off code to a common routineMauro Carvalho Chehab
Instead of having two copies of the same logic, place the power-off logic in a separate function. No functional changes. Link: https://lore.kernel.org/r/64f6e8da3e5fff38b6c8fcb208ace46efe6555bb.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Xiaowei Song <songxiaowei@hisilicon.com>
2021-11-04PCI: kirin: Add power_off support for Kirin 960 PHYMauro Carvalho Chehab
In order to prepare for module unload, add a power_off method for HiKey 960. Link: https://lore.kernel.org/r/b095818b0d7fadae4cae200f481caf7a66e61fb4.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Xiaowei Song <songxiaowei@hisilicon.com>
2021-11-04PCI: kirin: Allow building it as a moduleMauro Carvalho Chehab
There's nothing preventing this driver from being loaded as a module. Change its config from bool to tristate. Link: https://lore.kernel.org/r/b5e7cfe9df09b492750bd6db0f0c911eaae8c2d4.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Xiaowei Song <songxiaowei@hisilicon.com>
2021-11-04PCI: kirin: Add MODULE_* macrosMauro Carvalho Chehab
This driver misses the MODULE_* macros. Add them. Link: https://lore.kernel.org/r/f7a951d0c2009f5765214fc2e83e24cf41585023.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Xiaowei Song <songxiaowei@hisilicon.com>
2021-11-04PCI: kirin: Add Kirin 970 compatibleMauro Carvalho Chehab
Now that everything is in place, add a compatible for Kirin 970. Link: https://lore.kernel.org/r/ac8c730c0300b90d96bdaaf387d458d8949241a9.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Xiaowei Song <songxiaowei@hisilicon.com>
2021-11-04PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridgeMauro Carvalho Chehab
On HiKey970, there's a PEX 8606 PCI bridge on its PHY with 6 lanes. Only 4 lanes are connected: lane 0 - connected to Kirin 970 (upstream) lane 4 - M.2 slot lane 5 - mini PCIe slot lane 6 - on-board Ethernet controller Each lane has its own PERST# GPIO pin and needs a clock request. Add support to parse a DT schema containing the above data. HiKey 970 requires a little more waiting time for the PCI bridge - which is outside the SoC - to finish the PERST# reset, and then initialize the eye diagram. Increase the waiting time for the PERST# signals accordingly. [bhelgaas: squash refcount fix from Wan Jiabing <wanjiabing@vivo.com>: https://lore.kernel.org/r/20211103062518.25695-1-wanjiabing@vivo.com and drop "parent" refcount per https://lore.kernel.org/all/20211103143059.GA683503@bhelgaas/] Link: https://lore.kernel.org/r/bb391a0e0f0863b66e645048315fab1a4f63f277.1634812676.git.mchehab+huawei@kernel.org Link: https://lore.kernel.org/all/9a365cffe5af9ec5a1f79638968c3a2efa979b65.1634622716.git.mchehab+huawei@kernel.org/ Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Kishon Vijay Abraham I <kishon@ti.com>
2021-11-04PCI: apple: Set up reference clocks when probingAlyssa Rosenzweig
Apple's PCIe controller requires clocks to be configured in order to bring up the hardware. Add the register pokes required to do so. Adapted from Corellium's driver via Mark Kettenis's U-Boot patches. Co-developed-by: Stan Skowronek <stan@corellium.com> Link: https://lore.kernel.org/r/20210929163847.2807812-6-maz@kernel.org Signed-off-by: Stan Skowronek <stan@corellium.com> Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-04PCI: apple: Add initial hardware bring-upAlyssa Rosenzweig
Add a minimal driver to bring up the PCIe bus on Apple system-on-chips, particularly the Apple M1. This driver exposes the internal bus used for the USB type-A ports, Ethernet, Wi-Fi, and Bluetooth. Bringing up the radios requires additional drivers beyond what's necessary for PCIe itself. Co-developed-by: Stan Skowronek <stan@corellium.com> Link: https://lore.kernel.org/r/20210929163847.2807812-5-maz@kernel.org Signed-off-by: Stan Skowronek <stan@corellium.com> Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Sven Peter <sven@svenpeter.dev>
2021-11-04PCI: of: Allow matching of an interrupt-map local to a PCI deviceMarc Zyngier
Just as we now allow an interrupt map to be parsed when part of an interrupt controller, there is no reason to ignore an interrupt map that would be part of a pci device node such as a root port since we already allow interrupt specifiers. Allow the matching of such property when local to the node of a PCI device, which allows the device itself to use the interrupt map for for its own purpose. Link: https://lore.kernel.org/r/20210929163847.2807812-4-maz@kernel.org Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-11-04of/irq: Allow matching of an interrupt-map local to an interrupt controllerMarc Zyngier
of_irq_parse_raw() has a baked assumption that if a node has an interrupt-controller property, it cannot possibly also have an interrupt-map property (the latter being ignored). This seems to be an odd behaviour, and there is no reason why we should avoid supporting this use case. This is specially useful when a PCI root port acts as an interrupt controller for PCI endpoints, such as this: pcie0: pcie@690000000 { [...] port00: pci@0,0 { device_type = "pci"; [...] #address-cells = <3>; interrupt-controller; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &port00 0 0 0 0>, <0 0 0 2 &port00 0 0 0 1>, <0 0 0 3 &port00 0 0 0 2>, <0 0 0 4 &port00 0 0 0 3>; }; }; Handle it by detecting that we have an interrupt-map early in the parsing, and special case the situation where the phandle in the interrupt map refers to the current node (which is the interesting case here). Link: https://lore.kernel.org/r/20210929163847.2807812-3-maz@kernel.org Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-11-04irqdomain: Make of_phandle_args_to_fwspec() generally availableMarc Zyngier
of_phandle_args_to_fwspec() can be generally useful to code extracting a DT of_phandle and using an irq_fwspec to use the hierarchical irqdomain API. Make it visible to the rest of the kernel, including modules. Link: https://lore.kernel.org/r/20210929163847.2807812-2-maz@kernel.org Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-04block: make bio_queue_enter() fast-path available inlineJens Axboe
Just a prep patch for shifting the queue enter logic. This moves the expected fast path inline, and leaves __bio_queue_enter() as an out-of-line function call. We don't want to inline the latter, as it's mostly slow path code. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04block: split request allocation components into helpersJens Axboe
This is in preparation for a fix, but serves as a cleanup as well moving the cached vs regular alloc logic out of blk_mq_submit_bio(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04block: have plug stored requests hold references to the queueJens Axboe
Requests that were stored in the cache deliberately didn't hold an enter reference to the queue, instead we grabbed one every time we pulled a request out of there. That made for awkward logic on freeing the remainder of the cached list, if needed, where we had to artificially raise the queue usage count before each free. Grab references up front for cached plug requests. That's safer, and also more efficient. Fixes: 47c122e35d7e ("block: pre-allocate requests if plug is started and is a batch") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04PCI: Do not enable AtomicOps on VFsSelvin Xavier
Host crashes when pci_enable_atomic_ops_to_root() is called for VFs with virtual buses. The virtual buses added to SR-IOV have bus->self set to NULL and host crashes due to this. PID: 4481 TASK: ffff89c6941b0000 CPU: 53 COMMAND: "bash" ... #3 [ffff9a9481713808] oops_end at ffffffffb9025cd6 #4 [ffff9a9481713828] page_fault_oops at ffffffffb906e417 #5 [ffff9a9481713888] exc_page_fault at ffffffffb9a0ad14 #6 [ffff9a94817138b0] asm_exc_page_fault at ffffffffb9c00ace [exception RIP: pcie_capability_read_dword+28] RIP: ffffffffb952fd5c RSP: ffff9a9481713960 RFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff89c6b1096000 RCX: 0000000000000000 RDX: ffff9a9481713990 RSI: 0000000000000024 RDI: 0000000000000000 RBP: 0000000000000080 R8: 0000000000000008 R9: ffff89c64341a2f8 R10: 0000000000000002 R11: 0000000000000000 R12: ffff89c648bab000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff89c648bab0c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff9a9481713988] pci_enable_atomic_ops_to_root at ffffffffb95359a6 #8 [ffff9a94817139c0] bnxt_qplib_determine_atomics at ffffffffc08c1a33 [bnxt_re] #9 [ffff9a94817139d0] bnxt_re_dev_init at ffffffffc08ba2d1 [bnxt_re] Per PCIe r5.0, sec 9.3.5.10, the AtomicOp Requester Enable bit in Device Control 2 is reserved for VFs. The PF value applies to all associated VFs. Return -EINVAL if pci_enable_atomic_ops_to_root() is called for a VF. Link: https://lore.kernel.org/r/1631354585-16597-1-git-send-email-selvin.xavier@broadcom.com Fixes: 35f5ace5dea4 ("RDMA/bnxt_re: Enable global atomic ops if platform supports") Fixes: 430a23689dea ("PCI: Add pci_enable_atomic_ops_to_root()") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
2021-11-04Merge tag 'for-5.16/parisc-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc architecture fixes and updates from Helge Deller: "One build error fix and two optimizations: - Fix build error by moving the CPU field back into thread_info struct (Ard Biesheuvel) - Do not enable IRQs unconditionally at start of interrupt handler if they were disabled before (Sven Schnelle) - Keep interrupts enabled during cmpxchg and futex operations (Dave Anglin)" * tag 'for-5.16/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: move CPU field back into thread_info parisc: Don't disable interrupts in cmpxchg and futex operations parisc: don't enable irqs unconditionally in handle_interruption()
2021-11-04Merge tag 'iommu-updates-v5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Intel IOMMU Updates fro Lu Baolu: - Dump DMAR translation structure when DMA fault occurs - An optimization in the page table manipulation code - Use second level for GPA->HPA translation - Various cleanups - Arm SMMU Updates from Will - Minor optimisations to SMMUv3 command creation and submission - Numerous new compatible string for Qualcomm SMMUv2 implementations - Fixes for the SWIOTLB based implemenation of dma-iommu code for untrusted devices - Add support for r8a779a0 to the Renesas IOMMU driver and DT matching code for r8a77980 - A couple of cleanups and fixes for the Apple DART IOMMU driver - Make use of generic report_iommu_fault() interface in the AMD IOMMU driver - Various smaller fixes and cleanups * tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (35 commits) iommu/dma: Fix incorrect error return on iommu deferred attach iommu/dart: Initialize DART_STREAMS_ENABLE iommu/dma: Use kvcalloc() instead of kvzalloc() iommu/tegra-smmu: Use devm_bitmap_zalloc when applicable iommu/dart: Use kmemdup instead of kzalloc and memcpy iommu/vt-d: Avoid duplicate removing in __domain_mapping() iommu/vt-d: Convert the return type of first_pte_in_page to bool iommu/vt-d: Clean up unused PASID updating functions iommu/vt-d: Delete dev_has_feat callback iommu/vt-d: Use second level for GPA->HPA translation iommu/vt-d: Check FL and SL capability sanity in scalable mode iommu/vt-d: Remove duplicate identity domain flag iommu/vt-d: Dump DMAR translation structure when DMA fault occurs iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option iommu/arm-smmu-qcom: Request direct mapping for modem device iommu: arm-smmu-qcom: Add compatible for QCM2290 dt-bindings: arm-smmu: Add compatible for QCM2290 SoC iommu/arm-smmu-qcom: Add SM6350 SMMU compatible dt-bindings: arm-smmu: Add compatible for SM6350 SoC iommu/arm-smmu-v3: Properly handle the return value of arm_smmu_cmdq_build_cmd() ...
2021-11-04xen/balloon: rename alloc/free_xenballooned_pagesJuergen Gross
alloc_xenballooned_pages() and free_xenballooned_pages() are used as direct replacements of xen_alloc_unpopulated_pages() and xen_free_unpopulated_pages() in case CONFIG_XEN_UNPOPULATED_ALLOC isn't defined. Guard both functions with !CONFIG_XEN_UNPOPULATED_ALLOC and rename them to the xen_*() variants they are replacing. This allows to remove some ifdeffery from the xen.h header file. Adapt the prototype of the functions to match. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211102092234.17852-1-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-11-04xen/balloon: add late_initcall_sync() for initial ballooning doneJuergen Gross
When running as PVH or HVM guest with actual memory < max memory the hypervisor is using "populate on demand" in order to allow the guest to balloon down from its maximum memory size. For this to work correctly the guest must not touch more memory pages than its target memory size as otherwise the PoD cache will be exhausted and the guest is crashed as a result of that. In extreme cases ballooning down might not be finished today before the init process is started, which can consume lots of memory. In order to avoid random boot crashes in such cases, add a late init call to wait for ballooning down having finished for PVH/HVM guests. Warn on console if initial ballooning fails, panic() after stalling for more than 3 minutes per default. Add a module parameter for changing this timeout. [boris: replaced pr_info() with pr_notice()] Cc: <stable@vger.kernel.org> Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211102091944.17487-1-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-11-04block: add a loff_t cast to bdev_nr_bytesChristoph Hellwig
Not really needed as both loff_t and sector_t are always 64-bits wide, but this documents the different types a bit better. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211104172037.531803-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04Merge tag 'tty-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.16-rc1. Nothing major in here at all, just lots of tiny serial and tty driver updates for various reported things, and some good cleanups. These include: - more good tty api cleanups from Jiri - stm32 serial driver updates - softlockup fix for non-preempt systems under high serial load - rpmsg serial driver update - 8250 drivers updates and fixes - n_gsm line discipline fixes and updates as people are finally starting to use it. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits) tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE tty: rpmsg: Define tty name via constant string literal tty: rpmsg: Add pr_fmt() to prefix messages tty: rpmsg: Use dev_err_probe() in ->probe() tty: rpmsg: Unify variable used to keep an error code tty: rpmsg: Assign returned id to a local variable serial: stm32: push DMA RX data before suspending serial: stm32: terminate / restart DMA transfer at suspend / resume serial: stm32: rework RX dma initialization and release serial: 8250_pci: Remove empty stub pci_quatech_exit() serial: 8250_pci: Replace custom pci_match_id() implementation serial: xilinx_uartps: Fix race condition causing stuck TX serial: sunzilog: Mark sunzilog_putchar() __maybe_unused Revert "tty: hvc: pass DMA capable memory to put_chars()" Revert "virtio-console: remove unnecessary kmemdup()" serial: 8250_pci: Replace dev_*() by pci_*() macros serial: 8250_pci: Get rid of redundant 'else' keyword serial: 8250_pci: Refactor the loop in pci_ite887x_init() tty: add rpmsg driver ...
2021-11-04virtio_gpio: drop packed attributeMichael S. Tsirkin
Declaring the struct packed here is mostly harmless, but gives a bad example for people to copy. As the struct is packed and aligned manually, let's just drop the attribute. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-11-04gpio: virtio: Add IRQ supportViresh Kumar
This patch adds IRQ support for the virtio GPIO driver. Note that this uses the irq_bus_lock/unlock() callbacks, since those operations over virtio may sleep. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-11-04Merge tag 'driver-core-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 5.16-rc1. All of these have been in linux-next for a while now with no reported problems. Included in here are: - big update and cleanup of the sysfs abi documentation files and scripts from Mauro. We are almost at the place where we can properly check that the running kernel's sysfs abi is documented fully. - firmware loader updates - dyndbg updates - kernfs cleanups and fixes from Christoph - device property updates - component fix - other minor driver core cleanups and fixes" * tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits) device property: Drop redundant NULL checks x86/build: Tuck away built-in firmware under FW_LOADER vmlinux.lds.h: wrap built-in firmware support under FW_LOADER firmware_loader: move struct builtin_fw to the only place used x86/microcode: Use the firmware_loader built-in API firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE() firmware_loader: formalize built-in firmware API component: do not leave master devres group open after bind dyndbg: refine verbosity 1-4 summary-detail gpiolib: acpi: Replace custom code with device_match_acpi_handle() i2c: acpi: Replace custom function with device_match_acpi_handle() driver core: Provide device_match_acpi_handle() helper dyndbg: fix spurious vNpr_info change dyndbg: no vpr-info on empty queries dyndbg: vpr-info on remove-module complete, not starting device property: Add missed header in fwnode.h Documentation: dyndbg: Improve cli param examples dyndbg: Remove support for ddebug_query param dyndbg: make dyndbg a known cli param dyndbg: show module in vpr-info in dd-exec-queries ...
generated by cgit (git 2.34.1) at 2025-09-30 06:13:32 +0000