summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-01arm64: scs: use vmapped IRQ and SDEI shadow stacksSami Tolvanen
Use scs_alloc() to allocate also IRQ and SDEI shadow stacks instead of using statically allocated stacks. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130233442.2562064-3-samitolvanen@google.com [will: Move CONFIG_SHADOW_CALL_STACK check into init_irq_scs()] Signed-off-by: Will Deacon <will@kernel.org>
2020-12-01KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity checkGreg Kurz
Commit 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") updated kvmppc_xive_vcpu_id_valid() in a way that allows userspace to trigger an assertion in skiboot and crash the host: [ 696.186248988,3] XIVE[ IC 08 ] eq_blk != vp_blk (0 vs. 1) for target 0x4300008c/0 [ 696.186314757,0] Assert fail: hw/xive.c:2370:0 [ 696.186342458,0] Aborting! xive-kvCPU 0043 Backtrace: S: 0000000031e2b8f0 R: 0000000030013840 .backtrace+0x48 S: 0000000031e2b990 R: 000000003001b2d0 ._abort+0x4c S: 0000000031e2ba10 R: 000000003001b34c .assert_fail+0x34 S: 0000000031e2ba90 R: 0000000030058984 .xive_eq_for_target.part.20+0xb0 S: 0000000031e2bb40 R: 0000000030059fdc .xive_setup_silent_gather+0x2c S: 0000000031e2bc20 R: 000000003005a334 .opal_xive_set_vp_info+0x124 S: 0000000031e2bd20 R: 00000000300051a4 opal_entry+0x134 --- OPAL call token: 0x8a caller R1: 0xc000001f28563850 --- XIVE maintains the interrupt context state of non-dispatched vCPUs in an internal VP structure. We allocate a bunch of those on startup to accommodate all possible vCPUs. Each VP has an id, that we derive from the vCPU id for efficiency: static inline u32 kvmppc_xive_vp(struct kvmppc_xive *xive, u32 server) { return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server); } The KVM XIVE device used to allocate KVM_MAX_VCPUS VPs. This was limitting the number of concurrent VMs because the VP space is limited on the HW. Since most of the time, VMs run with a lot less vCPUs, commit 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") gave the possibility for userspace to tune the size of the VP block through the KVM_DEV_XIVE_NR_SERVERS attribute. The check in kvmppc_pack_vcpu_id() was changed from cpu < KVM_MAX_VCPUS * xive->kvm->arch.emul_smt_mode to cpu < xive->nr_servers * xive->kvm->arch.emul_smt_mode The previous check was based on the fact that the VP block had KVM_MAX_VCPUS entries and that kvmppc_pack_vcpu_id() guarantees that packed vCPU ids are below KVM_MAX_VCPUS. We've changed the size of the VP block, but kvmppc_pack_vcpu_id() has nothing to do with it and it certainly doesn't ensure that the packed vCPU ids are below xive->nr_servers. kvmppc_xive_vcpu_id_valid() might thus return true when the VM was configured with a non-standard VSMT mode, even if the packed vCPU id is higher than what we expect. We end up using an unallocated VP id, which confuses OPAL. The assert in OPAL is probably abusive and should be converted to a regular error that the kernel can handle, but we shouldn't really use broken VP ids in the first place. Fix kvmppc_xive_vcpu_id_valid() so that it checks the packed vCPU id is below xive->nr_servers, which is explicitly what we want. Fixes: 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/160673876747.695514.1809676603724514920.stgit@bahia.lan
2020-12-01arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-idHeinrich Schuchardt
Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") network is broken on the NanoPi Neo Plus2. This patch changes the phy-mode to use internal delays both for RX and TX as has been done for other boards affected by the same commit. Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201129194512.1475586-1-xypron.glpk@gmx.de
2020-12-01arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-idHeinrich Schuchardt
Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") iSCSI booting fails on the Pine A64 LTS. This patch changes the phy-mode to use internal delays both for RX and TX as has been done for other boards affected by the same commit. Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201129162627.1244808-1-xypron.glpk@gmx.de
2020-12-01scs: switch to vmapped shadow stacksSami Tolvanen
The kernel currently uses kmem_cache to allocate shadow call stacks, which means an overflows may not be immediately detected and can potentially result in another task's shadow stack to be overwritten. This change switches SCS to use virtually mapped shadow stacks for tasks, which increases shadow stack size to a full page and provides more robust overflow detection, similarly to VMAP_STACK. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201130233442.2562064-2-samitolvanen@google.com Signed-off-by: Will Deacon <will@kernel.org>
2020-12-01USB: serial: option: fix Quectel BG96 matchingBjørn Mork
This is a partial revert of commit 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") The Quectel BG96 is different from most other modern Quectel modems, having serial functions with 3 endpoints using ff/ff/ff and ff/fe/ff class/subclass/protocol. Including it in the change to accommodate dynamic function mapping was incorrect. Revert to interface number matching for the BG96, assuming static layout of the RMNET function on interface 4. This restores support for the serial functions on interfaces 2 and 3. Full lsusb output for the BG96: Bus 002 Device 003: ID 2c7c:0296 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2c7c idProduct 0x0296 bcdDevice 0.00 iManufacturer 3 Qualcomm, Incorporated iProduct 2 Qualcomm CDMA Technologies MSM iSerial 4 d1098243 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 145 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 1 Qualcomm Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 254 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: Sebastian Sjoholm <sebastian.sjoholm@gmail.com> Fixes: 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-12-01netfilter: nfnl_acct: remove data from struct netWang Shanker
This patch removes nfnl_acct_list from struct net to reduce the default memory footprint for the netns structure. Signed-off-by: Miao Wang <shankerwangmiao@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-12-01netfilter: Remove unnecessary conversion to boolKaixu Xia
Here we could use the '!=' expression to fix the following coccicheck warning: ./net/netfilter/xt_nfacct.c:30:41-46: WARNING: conversion to bool not needed here Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-11-30Input: xpad - support Ardwiino ControllersSanjay Govind
This commit adds support for Ardwiino Controllers Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com> Link: https://lore.kernel.org/r/20201201071922.131666-1-sanjay.govind9@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-30Input: i8042 - add ByteSpeed touchpad to noloop tablePo-Hsu Lin
It looks like the C15B laptop got another vendor: ByteSpeed LLC. Avoid AUX loopback on this touchpad as well, thus input subsystem will be able to recognize a Synaptics touchpad in the AUX port. BugLink: https://bugs.launchpad.net/bugs/1906128 Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20201201054723.5939-1-po-hsu.lin@canonical.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-01scsi: mpt3sas: Increase IOCInit request timeout to 30sSreekanth Reddy
Currently the IOCInit request message timeout is set to 10s. This is not sufficient in some scenarios such as during HBA FW downgrade operations. Increase the IOCInit request timeout to 30s. Link: https://lore.kernel.org/r/20201130082733.26120-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-01scsi: mpt3sas: Fix ioctl timeoutSuganath Prabu S
Commit c1a6c5ac4278 ("scsi: mpt3sas: For NVME device, issue a protocol level reset") modified the ioctl path 'timeout' variable type to u8 from unsigned long, limiting the maximum timeout value that the driver can support to 255 seconds. If the management application is requesting a higher value the resulting timeout will be zero. The operation times out immediately and the ioctl request fails. Change datatype back to unsigned long. Link: https://lore.kernel.org/r/20201125094838.4340-1-suganath-prabu.subramani@broadcom.com Fixes: c1a6c5ac4278 ("scsi: mpt3sas: For NVME device, issue a protocol level reset") Cc: <stable@vger.kernel.org> #v4.18+ Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-30scsi: storvsc: Validate length of incoming packet in ↵Andrea Parri (Microsoft)
storvsc_on_channel_callback() Check that the packet is of the expected size at least, don't copy data past the packet. Link: https://lore.kernel.org/r/20201118145348.109879-1-parri.andrea@gmail.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reported-by: Saruhan Karademir <skarade@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-30docs: bootconfig: Add the endianness of fieldsMasami Hiramatsu
Add a description about the endianness of the size and the checksum fields. Those must be stored as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583936246.547349.10964204130590955409.stgit@devnote2 Reported-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-30tools/bootconfig: Store size and checksum in footer as le32Masami Hiramatsu
Store the size and the checksum fields in the footer as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583935332.547349.5897811300636587426.stgit@devnote2 Reported-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-30bootconfig: Load size and checksum in the footer as le32Masami Hiramatsu
Load the size and the checksum fields in the footer as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583934457.547349.10504070298990791074.stgit@devnote2 Reported-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-30ring-buffer: Always check to put back before stamp when crossing pagesSteven Rostedt (VMware)
The current ring buffer logic checks to see if the updating of the event buffer was interrupted, and if it is, it will try to fix up the before stamp with the write stamp to make them equal again. This logic is flawed, because if it is not interrupted, the two are guaranteed to be different, as the current event just updated the before stamp before allocation. This guarantees that the next event (this one or another interrupting one) will think it interrupted the time updates of a previous event and inject an absolute time stamp to compensate. The correct logic is to always update the timestamps when traversing to a new sub buffer. Cc: stable@vger.kernel.org Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-30scsi: storvsc: Fix error return in storvsc_probe()Jing Xiangfeng
Return -ENOMEM from the error handling case instead of 0. Link: https://lore.kernel.org/r/20201127030206.104616-1-jingxiangfeng@huawei.com Fixes: 436ad9413353 ("scsi: storvsc: Allow only one remove lun work item to be issued per lun") Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-30Merge tag 'linux-can-fixes-for-5.10-20201130' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-30 The first patch is by me an target the tcan4x5x bindings for the m_can driver. It fixes the error path in the tcan4x5x_can_probe() function. The next two patches are by Jeroen Hofstee and makes the lost of arbitration error counters of sja1000 and the sun4i drivers consistent with the other drivers. Zhang Qilong contributes two patch that clean up the error path in the c_can and kvaser_pciefd drivers. * tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling can: c_can: c_can_power_up(): fix error handling can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error can: sja1000: sja1000_err(): don't count arbitration lose as an error can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare() ==================== Link: https://lore.kernel.org/r/20201130125307.218258-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30Merge tag 'linux-can-next-for-5.11-20201130' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2020-11-30 Gustavo A. R. Silva's patch for the pcan_usb driver fixes fall-through warnings for Clang. The next 5 patches target the mcp251xfd driver and are by Ursula Maplehurst and me. They optimizie the TEF and RX path by reducing number of SPI core requests to set the UINC bit. The remaining 8 patches target the m_can driver. The first 4 are various cleanups for the SPI binding driver (tcan4x5x) by Sean Nyekjaer, Dan Murphy and me. Followed by 4 cleanup patches by me for the m_can and m_can_platform driver. * tag 'linux-can-next-for-5.11-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: m_can: m_can_class_unregister(): move right after m_can_class_register() can: m_can: m_can_plat_remove(): remove unneeded platform_set_drvdata() can: m_can: remove not used variable struct m_can_classdev::freq can: m_can: Kconfig: convert the into menu can: tcan4x5x: tcan4x5x_can_probe(): remove probe failed error message can: tcan4x5x: remove mram_start and reg_offset from struct tcan4x5x_priv can: tcan4x5x: rename parse_config() function can: tcan4x5x: tcan4x5x_clear_interrupts(): remove redundant return statement can: mcp251xfd: tef-path: reduce number of SPI core requests to set UINC bit can: mcp251xfd: move struct mcp251xfd_tef_ring definition can: mcp251xfd: struct mcp251xfd_priv::tef to array of length 1 can: mcp25xxfd: rx-path: reduce number of SPI core requests to set UINC bit can: mcp251xfd: mcp25xxfd_ring_alloc(): add define instead open coding the maximum number of RX objects can: pcan_usb_core: fix fall-through warnings for Clang ==================== Link: https://lore.kernel.org/r/20201130141432.278219-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30net: wan: remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201127165734.2694693-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependencyNaveen N. Rao
DYNAMIC_FTRACE_WITH_DIRECT_CALLS should depend on DYNAMIC_FTRACE_WITH_REGS since we need ftrace_regs_caller(). Link: https://lkml.kernel.org/r/fc4b257ea8689a36f086d2389a9ed989496ca63a.1606412433.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: 763e34e74bb7d5c ("ftrace: Add register_ftrace_direct()") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-30ftrace: Fix updating FTRACE_FL_TRAMPNaveen N. Rao
On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in ftrace_get_addr_new() followed by the below message: Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001) The set of steps leading to this involved: - modprobe ftrace-direct-too - enable_probe - modprobe ftrace-direct - rmmod ftrace-direct <-- trigger The problem turned out to be that we were not updating flags in the ftrace record properly. From the above message about the trampoline accounting being bad, it can be seen that the ftrace record still has FTRACE_FL_TRAMP set though ftrace-direct module is going away. This happens because we are checking if any ftrace_ops has the FTRACE_FL_TRAMP flag set _before_ updating the filter hash. The fix for this is to look for any _other_ ftrace_ops that also needs FTRACE_FL_TRAMP. Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-30tracing: Fix alignment of static bufferMinchan Kim
With 5.9 kernel on ARM64, I found ftrace_dump output was broken but it had no problem with normal output "cat /sys/kernel/debug/tracing/trace". With investigation, it seems coping the data into temporal buffer seems to break the align binary printf expects if the static buffer is not aligned with 4-byte. IIUC, get_arg in bstr_printf expects that args has already right align to be decoded and seq_buf_bprintf says ``the arguments are saved in a 32bit word array that is defined by the format string constraints``. So if we don't keep the align under copy to temporal buffer, the output will be broken by shifting some bytes. This patch fixes it. Link: https://lkml.kernel.org/r/20201125225654.1618966-1-minchan@kernel.org Cc: <stable@vger.kernel.org> Fixes: 8e99cf91b99bb ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-30tracing: Remove WARN_ON in start_thread()Vasily Averin
This patch reverts commit 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists") .start hook can be legally called several times if according tracer is stopped screen window 1 [root@localhost ~]# echo 1 > /sys/kernel/tracing/events/kmem/kfree/enable [root@localhost ~]# echo 1 > /sys/kernel/tracing/options/pause-on-trace [root@localhost ~]# less -F /sys/kernel/tracing/trace screen window 2 [root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on 0 [root@localhost ~]# echo hwlat > /sys/kernel/debug/tracing/current_tracer [root@localhost ~]# echo 1 > /sys/kernel/debug/tracing/tracing_on [root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on 0 [root@localhost ~]# echo 2 > /sys/kernel/debug/tracing/tracing_on triggers warning in dmesg: WARNING: CPU: 3 PID: 1403 at kernel/trace/trace_hwlat.c:371 hwlat_tracer_start+0xc9/0xd0 Link: https://lkml.kernel.org/r/bd4d3e70-400d-9c82-7b73-a2d695e86b58@virtuozzo.com Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-30samples/ftrace: Mark my_tramp[12]? globalSami Tolvanen
my_tramp[12]? are declared as global functions in C, but they are not marked global in the inline assembly definition. This mismatch confuses Clang's Control-Flow Integrity checking. Fix the definitions by adding .globl. Link: https://lkml.kernel.org/r/20201113183414.1446671-1-samitolvanen@google.com Fixes: 9d907f1ae80b8 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-12-01drm/exynos: use exynos_dsi as drvdataMichael Tretter
Use the exynos_dsi as drvdata instead of the encoder to further decouple the driver from the encoder. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2020-12-01drm/exynos: remove in_bridge_node from exynos_dsiMichael Tretter
We do not need to keep a reference to the in_bridge_node, but we can simply drop it, once we found and attached the previous bridge. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2020-12-01drm/exynos/hdmi: add support for 1920x1200@60Hz modeMarek Szyprowski
Add clock configuration for 154MHz pixelclock to Exynos542x HDMIPHY, which is required for 1920x1200@60Hz mode. The PLL configuration data has been taken from the vendor's kernel tree for the Odroid XU4 board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2020-11-30vxlan: Copy needed_tailroom from lowerdevSven Eckelmann
While vxlan doesn't need any extra tailroom, the lowerdev might need it. In that case, copy it over to reduce the chance for additional (re)allocations in the transmit path. Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20201126125247.1047977-2-sven@narfation.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30vxlan: Add needed_headroom for lower deviceSven Eckelmann
It was observed that sending data via batadv over vxlan (on top of wireguard) reduced the performance massively compared to raw ethernet or batadv on raw ethernet. A check of perf data showed that the vxlan_build_skb was calling all the time pskb_expand_head to allocate enough headroom for: min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len + VXLAN_HLEN + iphdr_len; But the vxlan_config_apply only requested needed headroom for: lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM So it completely ignored the needed_headroom of the lower device. The first caller of net_dev_xmit could therefore never make sure that enough headroom was allocated for the rest of the transmit path. Cc: Annika Wickert <annika.wickert@exaring.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Tested-by: Annika Wickert <aw@awlnx.space> Link: https://lore.kernel.org/r/20201126125247.1047977-1-sven@narfation.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30Merge branch 'mptcp-avoid-workqueue-usage-for-data'Jakub Kicinski
Paolo Abeni says: ==================== mptcp: avoid workqueue usage for data The current locking schema used to protect the MPTCP data-path requires the usage of the MPTCP workqueue to process the incoming data, depending on trylock result. The above poses scalability limits and introduces random delays in MPTCP-level acks. With this series we use a single spinlock to protect the MPTCP data-path, removing the need for workqueue and delayed ack usage. This additionally reduces the number of atomic operations required per packet and cleans-up considerably the poll/wake-up code. ==================== Link: https://lore.kernel.org/r/cover.1606413118.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30mptcp: use mptcp release_cb for delayed tasksPaolo Abeni
We have some tasks triggered by the subflow receive path which require to access the msk socket status, specifically: mptcp_clean_una() and mptcp_push_pending() We have almost everything in place to defer to the msk release_cb such tasks when the msk sock is owned. Since the worker is no more used to clean the acked data, for fallback sockets we need to explicitly flush them. As an added bonus we can move the wake-up code in __mptcp_clean_una(), simplify a lot mptcp_poll() and move the timer update under the data lock. The worker is now used only to process and send DATA_FIN packets and do the mptcp-level retransmissions. Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30mptcp: avoid a few atomic ops in the rx pathPaolo Abeni
Extending the data_lock scope in mptcp_incoming_option we can use that to protect both snd_una and wnd_end. In the typical case, we will have a single atomic op instead of 2 Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30mptcp: allocate TX skbs in msk contextPaolo Abeni
Move the TX skbs allocation in mptcp_sendmsg() scope, and tentatively pre-allocate a skbs number proportional to the sendmsg() length. Use the ssk tx skb cache to prevent the subflow allocation. This allows removing the msk skb extension cache and will make possible the later patches. Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30mptcp: protect the rx path with the msk socket spinlockPaolo Abeni
Such spinlock is currently used only to protect the 'owned' flag inside the socket lock itself. With this patch, we extend its scope to protect the whole msk receive path and sk_forward_memory. Given the above, we can always move data into the msk receive queue (and OoO queue) from the subflow. We leverage the previous commit, so that we need to acquire the spinlock in the tx path only when moving fwd memory. recvmsg() must now explicitly acquire the socket spinlock when moving skbs out of sk_receive_queue. To reduce the number of lock operations required we use a second rx queue and splice the first into the latter in mptcp_lock_sock(). Additionally rmem allocated memory is bulk-freed via release_cb() Acked-by: Florian Westphal <fw@strlen.de> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30mptcp: implement wmem reservationPaolo Abeni
This leverages the previous commit to reserve the wmem required for the sendmsg() operation when the msk socket lock is first acquired. Some heuristics are used to get a reasonable [over] estimation of the whole memory required. If we can't forward alloc such amount fallback to a reasonable small chunk, otherwise enter the wait for memory path. When sendmsg() needs more memory it looks at wmem_reserved first and if that is exhausted, move more space from sk_forward_alloc. The reserved memory is not persistent and is released at the next socket unlock via the release_cb(). Overall this will simplify the next patch. Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30mptcp: open code mptcp variant for lock_sockPaolo Abeni
This allows invoking an additional callback under the socket spin lock. Will be used by the next patches to avoid additional spin lock contention. Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30chelsio/chtls: fix panic during unload reload chtlsVinay Kumar Yadav
there is kernel panic in inet_twsk_free() while chtls module unload when socket is in TIME_WAIT state because sk_prot_creator was not preserved on connection socket. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Udai Sharma <udai.sharma@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201125214913.16938-1-vinay.yadav@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30Merge branch 'dpaa_eth-add-xdp-support'Jakub Kicinski
Camelia Groza says: ==================== dpaa_eth: add XDP support Enable XDP support for the QorIQ DPAA1 platforms. Implement all the current actions (DROP, ABORTED, PASS, TX, REDIRECT). No Tx batching is added at this time. Additional XDP_PACKET_HEADROOM bytes are reserved in each frame's headroom. After transmit, a reference to the xdp_frame is saved in the buffer for clean-up on confirmation in a newly created structure for software annotations. DPAA_TX_PRIV_DATA_SIZE bytes are reserved in the buffer for storing this structure and the XDP program is restricted from accessing them. The driver shares the egress frame queues used for XDP with the network stack. The DPAA driver is a LLTX driver so no explicit locking is required on transmission. ==================== Link: https://lore.kernel.org/r/cover.1606322126.git.camelia.groza@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: implement the A050385 erratum workaround for XDPCamelia Groza
For XDP TX, even tough we start out with correctly aligned buffers, the XDP program might change the data's alignment. For REDIRECT, we have no control over the alignment either. Create a new workaround for xdp_frame structures to verify the erratum conditions and move the data to a fresh buffer if necessary. Create a new xdp_frame for managing the new buffer and free the old one using the XDP API. Due to alignment constraints, all frames have a 256 byte headroom that is offered fully to XDP under the erratum. If the XDP program uses all of it, the data needs to be move to make room for the xdpf backpointer. Disable the metadata support since the information can be lost. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: rename current skb A050385 erratum workaroundCamelia Groza
Explicitly point that the current workaround addresses skbs. This change is in preparation for adding a workaround for XDP scenarios. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: add XDP_REDIRECT supportCamelia Groza
After transmission, the frame is returned on confirmation queues for cleanup. For this, store a backpointer to the xdp_frame in the private reserved area at the start of the TX buffer. No TX batching support is implemented at this time. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: add XDP_TX supportCamelia Groza
Use an xdp_frame structure for managing the frame. Store a backpointer to the structure at the start of the buffer before enqueueing for cleanup on TX confirmation. Reserve DPAA_TX_PRIV_DATA_SIZE bytes from the frame size shared with the XDP program for this purpose. Use the XDP API for freeing the buffer when it returns to the driver on the TX confirmation path. The frame queues are shared with the netstack. The DPAA driver is a LLTX driver so no explicit locking is required on transmission. This approach will be reused for XDP REDIRECT. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: limit the possible MTU range when XDP is enabledCamelia Groza
Implement the ndo_change_mtu callback to prevent users from setting an MTU that would permit processing of S/G frames. The maximum MTU size is dependent on the buffer size. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: add basic XDP supportCamelia Groza
Implement the XDP_DROP and XDP_PASS actions. Avoid draining and reconfiguring the buffer pool at each XDP setup/teardown by increasing the frame headroom and reserving XDP_PACKET_HEADROOM bytes from the start. Since we always reserve an entire page per buffer, this change only impacts Jumbo frame scenarios where the maximum linear frame size is reduced by 256 bytes. Multi buffer Scatter/Gather frames are now used instead in these scenarios. Allow XDP programs to access the entire buffer. The data in the received frame's headroom can be overwritten by the XDP program. Extract the relevant fields from the headroom while they are still available, before running the XDP program. Since the headroom might be resized before the frame is passed up to the stack, remove the check for a fixed headroom value when building an skb. Allow the meta data to be updated and pass the information up the stack. Scatter/Gather frames are dropped when XDP is enabled. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: add struct for software backpointersCamelia Groza
We maintain an skb backpointer in the software annotations area of Tx frames. Introduce a structure for explicit handling. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pinBernd Bauer
Use the correct pin for the i2c scl signal else we can't access the SoM eeprom. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Bernd Bauer <bernd.bauer@anton-paar.com> [m.felsch@pengutronix.de: Adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-01ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrpFabio Estevam
Since commit 8ad2d1dcce54 ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support") the PAD_GPIO_6 is used for providing the camera sensor clock. Remove it from the enetgrp to fix the following IOMXU conflict: [ 9.972414] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_GPIO_6 already requested by 2188000.ethernet; cannot claim for 1-003c [ 9.983857] imx6q-pinctrl 20e0000.pinctrl: pin-140 (1-003c) status -22 [ 9.990514] imx6q-pinctrl 20e0000.pinctrl: could not request pin 140 (MX6Q_PAD_GPIO_6) from group ov5645grp on device 20e0000.pinctrl Fixes: 8ad2d1dcce54 ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-30drm/i915/gt: Program mocs:63 for cache eviction on gen9Chris Wilson
Ville noticed that the last mocs entry is used unconditionally by the HW when it performs cache evictions, and noted that while the value is not meant to be writable by the driver, we should program it to a reasonable value nevertheless. As it turns out, we can change the value of mocs:63 and the value we were programming into it would cause hard hangs in conjunction with atomic operations. v2: Add details from bspec about how it is used by HW Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2707 Fixes: 3bbaba0ceaa2 ("drm/i915: Added Programming of the MOCS") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: <stable@vger.kernel.org> # v4.3+ Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201126140841.1982-1-chris@chris-wilson.co.uk (cherry picked from commit 977933b5da7c16f39295c4c1d4259a58ece65dbe) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
generated by cgit (git 2.34.1) at 2025-09-23 10:35:44 +0000