summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-19net: phylink: update documentation on create and destroyRussell King
Update the documentation on phylink's create and destroy functions to explicitly state that the rtnl lock must not be held while calling these. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19r8169: disable TSO on a single version of RTL8168c to fix performanceCorinna Vinschen
During performance testing, I found that one of my r8169 NICs suffered a major performance loss, a 8168c model. Running netperf's TCP_STREAM test didn't return the expected throughput of > 900 Mb/s, but rather only about 22 Mb/s. Strange enough, running the TCP_MAERTS and UDP_STREAM tests all returned with throughput > 900 Mb/s, as did TCP_STREAM with the other r8169 NICs I can test (either one of 8169s, 8168e, 8168f). Bisecting turned up commit 93681cd7d94f83903cb3f0f95433d10c28a7e9a5, "r8169: enable HW csum and TSO" as the culprit. I added my 8168c version, RTL_GIGA_MAC_VER_22, to the code special-casing the 8168evl as per the patch below. This fixed the performance problem for me. Fixes: 93681cd7d94f ("r8169: enable HW csum and TSO") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19MAINTAINERS: forcedeth: Change Zhu Yanjun's email addressZhu Yanjun
I prefer to use my personal email address for kernel related work. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Rain River <rain.1986.08.12@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19taprio: don't reject same mqprio settingsIvan Khoronzhuk
The taprio qdisc allows to set mqprio setting but only once. In case if mqprio settings are provided next time the error is returned as it's not allowed to change traffic class mapping in-flignt and that is normal. But if configuration is absolutely the same - no need to return error. It allows to provide same command couple times, changing only base time for instance, or changing only scheds maps, but leaving mqprio setting w/o modification. It more corresponds the message: "Changing the traffic mapping of a running schedule is not supported", so reject mqprio if it's really changed. Also corrected TC_BITMASK + 1 for consistency, as proposed. Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19net/tls: enable sk_msg redirect to tls socket egressWillem de Bruijn
Bring back tls_sw_sendpage_locked. sk_msg redirection into a socket with TLS_TX takes the following path: tcp_bpf_sendmsg_redir tcp_bpf_push_locked tcp_bpf_push kernel_sendpage_locked sock->ops->sendpage_locked Also update the flags test in tls_sw_sendpage_locked to allow flag MSG_NO_SHARED_FRAGS. bpf_tcp_sendmsg sets this. Link: https://lore.kernel.org/netdev/CA+FuTSdaAawmZ2N8nfDDKu3XLpXBbMtcCT0q4FntDD2gn8ASUw@mail.gmail.com/T/#t Link: https://github.com/wdebruij/kerneltools/commits/icept.2 Fixes: 0608c69c9a80 ("bpf: sk_msg, sock{map|hash} redirect through ULP") Fixes: f3de19af0f5b ("Revert \"net/tls: remove unused function tls_sw_sendpage_locked\"") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19afs: Fix missing timeout resetDavid Howells
In afs_wait_for_call_to_complete(), rather than immediately aborting an operation if a signal occurs, the code attempts to wait for it to complete, using a schedule timeout of 2*RTT (or min 2 jiffies) and a check that we're still receiving relevant packets from the server before we consider aborting the call. We may even ping the server to check on the status of the call. However, there's a missing timeout reset in the event that we do actually get a packet to process, such that if we then get a couple of short stalls, we then time out when progress is actually being made. Fix this by resetting the timeout any time we get something to process. If it's the failure of the call then the call state will get changed and we'll exit the loop shortly thereafter. A symptom of this is data fetches and stores failing with EINTR when they really shouldn't. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-19gve: fix dma sync bug where not all pages syncedAdi Suresh
The previous commit had a bug where the last page in the memory range could not be synced. This change fixes the behavior so that all the required pages are synced. Fixes: 9cfeeb576d49 ("gve: Fixes DMA synchronization") Signed-off-by: Adi Suresh <adisuresh@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19drm/i915: make pool objects read-onlyMatthew Auld
For our current users we don't expect pool objects to be writable from the gpu. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 4f7af1948abc ("drm/i915: Support ro ppgtt mapped cmdparser shadow buffers") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191119150154.18249-1-matthew.auld@intel.com (cherry picked from commit d18580b08b92ec4105eb0ede2d676e8b1f5a66c3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-19mdio_bus: Fix init if CONFIG_RESET_CONTROLLER=nGeert Uytterhoeven
Commit 1d4639567d97 ("mdio_bus: Fix PTR_ERR applied after initialization to constant") accidentally changed a check from -ENOTSUPP to -ENOSYS, causing failures if reset controller support is not enabled. E.g. on r7s72100/rskrza1: sh-eth e8203000.ethernet: MDIO init failed: -524 sh-eth: probe of e8203000.ethernet failed with error -524 Seen on r8a7740/armadillo, r7s72100/rskrza1, and r7s9210/rza2mevb. Fixes: 1d4639567d97 ("mdio_bus: Fix PTR_ERR applied after initialization to constant") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: YueHaibing <yuehaibing@huawei.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-19nbd:fix memory leak in nbd_get_socket()Sun Ke
Before returning NULL, put the sock first. Cc: stable@vger.kernel.org Fixes: cf1b2326b734 ("nbd: verify socket is supported during setup") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Sun Ke <sunke32@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-19virtio_console: allocate inbufs in add_port() only if it is neededLaurent Vivier
When we hot unplug a virtserialport and then try to hot plug again, it fails: (qemu) chardev-add socket,id=serial0,path=/tmp/serial0,server,nowait (qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\ chardev=serial0,id=serial0,name=serial0 (qemu) device_del serial0 (qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\ chardev=serial0,id=serial0,name=serial0 kernel error: virtio-ports vport2p2: Error allocating inbufs qemu error: virtio-serial-bus: Guest failure in adding port 2 for device \ virtio-serial0.0 This happens because buffers for the in_vq are allocated when the port is added but are not released when the port is unplugged. They are only released when virtconsole is removed (see a7a69ec0d8e4) To avoid the problem and to be symmetric, we could allocate all the buffers in init_vqs() as they are released in remove_vqs(), but it sounds like a waste of memory. Rather than that, this patch changes add_port() logic to ignore ENOSPC error in fill_queue(), which means queue has already been filled. Fixes: a7a69ec0d8e4 ("virtio_console: free buffers after reset") Cc: mst@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-11-19virtio_ring: fix return code on DMA mapping failsHalil Pasic
Commit 780bc7903a32 ("virtio_ring: Support DMA APIs") makes virtqueue_add() return -EIO when we fail to map our I/O buffers. This is a very realistic scenario for guests with encrypted memory, as swiotlb may run out of space, depending on it's size and the I/O load. The virtio-blk driver interprets -EIO form virtqueue_add() as an IO error, despite the fact that swiotlb full is in absence of bugs a recoverable condition. Let us change the return code to -ENOMEM, and make the block layer recover form these failures when virtio-blk encounters the condition described above. Cc: stable@vger.kernel.org Fixes: 780bc7903a32 ("virtio_ring: Support DMA APIs") Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-11-18mdio_bus: fix mdio_register_device when RESET_CONTROLLER is disabledMarek Behún
When CONFIG_RESET_CONTROLLER is disabled, the devm_reset_control_get_exclusive function returns -ENOTSUPP. This is not handled in subsequent check and then the mdio device fails to probe. When CONFIG_RESET_CONTROLLER is enabled, its code checks in OF for reset device, and since it is not present, returns -ENOENT. -ENOENT is handled. Add -ENOTSUPP also. This happened to me when upgrading kernel on Turris Omnia. You either have to enable CONFIG_RESET_CONTROLLER or use this patch. Signed-off-by: Marek Behún <marek.behun@nic.cz> Fixes: 71dd6c0dff51b ("net: phy: add support for reset-controller") Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18net/ipv4: fix sysctl max for fib_multipath_hash_policyMarcelo Ricardo Leitner
Commit eec4844fae7c ("proc/sysctl: add shared variables for range check") did: - .extra2 = &two, + .extra2 = SYSCTL_ONE, here, which doesn't seem to be intentional, given the changelog. This patch restores it to the previous, as the value of 2 still makes sense (used in fib_multipath_hash()). Fixes: eec4844fae7c ("proc/sysctl: add shared variables for range check") Cc: Matteo Croce <mcroce@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18phy: mdio-sun4i: add missed regulator_disable in removeChuhong Yuan
The driver forgets to disable the regulator in remove like what is done in probe failure. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18net/mlx4_en: Fix wrong limitation for number of TX ringsTariq Toukan
XDP_TX rings should not be limited by max_num_tx_rings_p_up. To make sure total number of TX rings never exceed MAX_TX_RINGS, add similar check in mlx4_en_alloc_tx_queue_per_tc(), where a new value is assigned for num_up. Fixes: 7e1dc5e926d5 ("net/mlx4_en: Limit the number of TX rings") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18net: sched: ensure opts_len <= IP_TUNNEL_OPTS_MAX in act_tunnel_keyXin Long
info->options_len is 'u8' type, and when opts_len with a value > IP_TUNNEL_OPTS_MAX, 'info->options_len = opts_len' will cast int to u8 and set a wrong value to info->options_len. Kernel crashed in my test when doing: # opts="0102:80:00800022" # for i in {1..99}; do opts="$opts,0102:80:00800022"; done # ip link add name geneve0 type geneve dstport 0 external # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: \ flower indev eth0 ip_proto udp action tunnel_key \ set src_ip 10.0.99.192 dst_ip 10.0.99.193 \ dst_port 6081 id 11 geneve_opts $opts \ action mirred egress redirect dev geneve0 So we should do the similar check as cls_flower does, return error when opts_len > IP_TUNNEL_OPTS_MAX in tunnel_key_copy_opts(). Fixes: 0ed5269f9e41 ("net/sched: add tunnel option support to act_tunnel_key") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18mlxsw: spectrum_router: Fix determining underlay for a GRE tunnelPetr Machata
The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a GRE tunnel. For a tunnel without a bound device, it uses the same VRF that the tunnel is in. However in Linux, a GRE tunnel without a bound device uses the main VRF as the underlay. Fix the function accordingly. mlxsw further assumed that moving a tunnel to a different VRF could cause conflict in local tunnel endpoint address, which cannot be offloaded. However, the only way that an underlay could be changed by moving the tunnel device itself is if the tunnel device does not have a bound device. But in that case the underlay is always the main VRF, so there is no opportunity to introduce a conflict by moving such device. Thus this check constitutes a dead code, and can be removed, which do. Fixes: 6ddb7426a7d4 ("mlxsw: spectrum_router: Introduce loopback RIFs") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18net: atm: Reduce the severity of logging in unlink_clip_vccAditya Pakki
In case of errors in unlink_clip_vcc, the logging level is set to pr_crit but failures in clip_setentry are handled by pr_err(). The patch changes the severity consistent across invocations. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18btrfs: drop bdev argument from submit_extent_pageDavid Sterba
After previous patches removing bdev being passed around to set it to bio, it has become unused in submit_extent_page. So it now has "only" 13 parameters. Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: remove extent_map::bdevDavid Sterba
We can now remove the bdev from extent_map. Previous patches made sure that bio_set_dev is correctly in all places and that we don't need to grab it from latest_bdev or pass it around inside the extent map. Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: drop bio_set_dev where not neededDavid Sterba
bio_set_dev sets a bdev to a bio and is not only setting a pointer bug also changing some state bits if there was a different bdev set before. This is one thing that's not needed. Another thing is that setting a bdev at bio allocation time is too early and actually does not work with plain redundancy profiles, where each time we submit a bio to a device, the bdev is set correctly. In many places the bio bdev is set to latest_bdev that seems to serve as a stub pointer "just to put something to bio". But we don't have to do that. Where do we know which bdev to set: * for regular IO: submit_stripe_bio that's called by btrfs_map_bio * repair IO: repair_io_failure, read or write from specific device * super block write (using buffer_heads but uses raw bdev) and barriers * scrub: this does not use all regular IO paths as it needs to reach all copies, verify and fixup eventually, and for that all bdev management is independent * raid56: rbio_add_io_page, for the RMW write * integrity-checker: does it's own low-level block tracking Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: get bdev directly from fs_devices in submit_extent_pageDavid Sterba
This is preparatory patch to remove @bdev parameter from submit_extent_page. It can't be removed completely, because the cgroups need it for wbc when initializing the bio wbc_init_bio bio_associate_blkg_from_css dereference bdev->bi_disk->queue The bdev pointer is the same as latest_bdev, thus no functional change. We can retrieve it from fs_devices that's reachable through several dereferences. The local variable shadows the parameter, but that's only temporary. Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18drm/i915: Protect request peeking with RCUChris Wilson
Since the execlists_active() is no longer protected by the engine->active.lock, we need to protect the request pointer with RCU to prevent it being freed as we evaluate whether or not we need to preempt. Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104090158.2959-2-chris@chris-wilson.co.uk (cherry picked from commit 7d148635253328dda7cfe55d57e3c828e9564427) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 8eb4704b124cbd44f189709959137d77063ecfa1) (cherry picked from commit 7e27238e149ce4f00d9cd801fe3aa0ea55e986a2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-18btrfs: record all roots for rename exchange on a subvolJosef Bacik
Testing with the new fsstress support for subvolumes uncovered a pretty bad problem with rename exchange on subvolumes. We're modifying two different subvolumes, but we only start the transaction on one of them, so the other one is not added to the dirty root list. This is caught by btrfs_cow_block() with a warning because the root has not been updated, however if we do not modify this root again we'll end up pointing at an invalid root because the root item is never updated. Fix this by making sure we add the destination root to the trans list, the same as we do with normal renames. This fixes the corruption. Fixes: cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT") CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18drm/i915/userptr: Try to acquire the page lock around set_page_dirty()Chris Wilson
set_page_dirty says: For pages with a mapping this should be done under the page lock for the benefit of asynchronous memory errors who prefer a consistent dirty state. This rule can be broken in some special cases, but should be better not to. Under those rules, it is only safe for us to use the plain set_page_dirty calls for shmemfs/anonymous memory. Userptr may be used with real mappings and so needs to use the locked version (set_page_dirty_lock). However, following a try_to_unmap() we may want to remove the userptr and so call put_pages(). However, try_to_unmap() acquires the page lock and so we must avoid recursively locking the pages ourselves -- which means that we cannot safely acquire the lock around set_page_dirty(). Since we can't be sure of the lock, we have to risk skip dirtying the page, or else risk calling set_page_dirty() without a lock and so risk fs corruption. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012 Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") References: cb6d7c7dc7ff ("drm/i915/userptr: Acquire the page lock around set_page_dirty()") References: 505a8ec7e11a ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"") References: 6dcc693bc57f ("ext4: warn when page is dirtied without buffers") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk (cherry picked from commit 0d4bbe3d407f79438dc4f87943db21f7134cfc65) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit cee7fb437edcdb2f9f8affa959e274997f5dca4d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-18drm/i915/pmu: "Frequency" is reported as accumulated cyclesChris Wilson
We report "frequencies" (actual-frequency, requested-frequency) as the number of accumulated cycles so that the average frequency over that period may be determined by the user. This means the units we report to the user are Mcycles (or just M), not MHz. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191109105356.5273-1-chris@chris-wilson.co.uk (cherry picked from commit e88866ef02851c88fe95a4bb97820b94b4d46f36) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit a7d87b70d6da96c6772e50728c8b4e78e4cbfd55) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-18drm/i915: Preload LUTs if the hw isn't currently using themVille Syrjälä
The LUTs are single buffered so in order to program them without tearing we'd have to do it during vblank (actually to be 100% effective it has to happen between start of vblank and frame start). We have no proper mechanism for that at the moment so we just defer loading them after the vblank waits have happened. That is not quite sufficient (especially when committing multiple pipes whose vblanks don't line up) so the LUT load will often leak into the following frame causing tearing. However in case the hardware wasn't previously using the LUT we can preload it before setting the enable bit (which is double buffered so won't tear). Let's determine if we can do such preloading and make it happen. Slight variation between the hardware requires some platforms specifics in the checks. Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win and Asus T100HA) when the gamma LUT gets loaded for the first time as the BIOS has left some junk in the LUT memory. v2: Deal with uapi vs. hw crtc state split s/GCM/CGM/ typo fix Cc: Hans de Goede <hdegoede@redhat.com> Fixes: 051a6d8d3ca0 ("drm/i915: Move LUT programming to happen after vblank waits") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> (cherry picked from commit 0ccc42a2fd5107a7f58e62c8b35b61de9a70ce82) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit f77021372e2880237278e0ee57faadc077a8256a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-18drm/i915: Don't oops in dumb_create ioctl if we have no crtcsVille Syrjälä
Make sure we have a crtc before probing its primary plane's max stride. Initially I thought we can't get this far without crtcs, but looks like we can via the dumb_create ioctl. Not sure if we shouldn't disable dumb buffer support entirely when we have no crtcs, but that would require some amount of work as the only thing currently being checked is dev->driver->dumb_create which we'd have to convert to some device specific dynamic thing. Cc: stable@vger.kernel.org Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Fixes: aa5ca8b7421c ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit baea9ffe64200033499a4955f431e315bb807899) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit aeec766133f99d45aad60d650de50fb382104d95) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-18Btrfs: fix block group remaining RO forever after error during device replaceFilipe Manana
When doing a device replace, while at scrub.c:scrub_enumerate_chunks(), we set the block group to RO mode and then wait for any ongoing writes into extents of the block group to complete. While doing that wait we overwrite the value of the variable 'ret' and can break out of the loop if an error happens without turning the block group back into RW mode. So what happens is the following: 1) btrfs_inc_block_group_ro() returns 0, meaning it set the block group to RO mode (its ->ro field set to 1 or incremented to some value > 1); 2) Then btrfs_wait_ordered_roots() returns a value > 0; 3) Then if either joining or committing the transaction fails, we break out of the loop wihtout calling btrfs_dec_block_group_ro(), leaving the block group in RO mode forever. To fix this, just remove the code that waits for ongoing writes to extents of the block group, since it's not needed because in the initial setup phase of a device replace operation, before starting to find all chunks and their extents, we set the target device for replace while holding fs_info->dev_replace->rwsem, which ensures that after releasing that semaphore, any writes into the source device are made to the target device as well (__btrfs_map_block() guarantees that). So while at scrub_enumerate_chunks() we only need to worry about finding and copying extents (from the source device to the target device) that were written before we started the device replace operation. Fixes: f0e9b7d6401959 ("Btrfs: fix race setting block group readonly during device replace") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: scrub: Don't check free space before marking a block group ROQu Wenruo
[BUG] When running btrfs/072 with only one online CPU, it has a pretty high chance to fail: btrfs/072 12s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//btrfs/072.dmesg) - output mismatch (see xfstests-dev/results//btrfs/072.out.bad) --- tests/btrfs/072.out 2019-10-22 15:18:14.008965340 +0800 +++ /xfstests-dev/results//btrfs/072.out.bad 2019-11-14 15:56:45.877152240 +0800 @@ -1,2 +1,3 @@ QA output created by 072 Silence is golden +Scrub find errors in "-m dup -d single" test ... And with the following call trace: BTRFS info (device dm-5): scrub: started on devid 1 ------------[ cut here ]------------ BTRFS: Transaction aborted (error -27) WARNING: CPU: 0 PID: 55087 at fs/btrfs/block-group.c:1890 btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs] CPU: 0 PID: 55087 Comm: btrfs Tainted: G W O 5.4.0-rc1-custom+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs] Call Trace: __btrfs_end_transaction+0xdb/0x310 [btrfs] btrfs_end_transaction+0x10/0x20 [btrfs] btrfs_inc_block_group_ro+0x1c9/0x210 [btrfs] scrub_enumerate_chunks+0x264/0x940 [btrfs] btrfs_scrub_dev+0x45c/0x8f0 [btrfs] btrfs_ioctl+0x31a1/0x3fb0 [btrfs] do_vfs_ioctl+0x636/0xaa0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x43/0x50 do_syscall_64+0x79/0xe0 entry_SYSCALL_64_after_hwframe+0x49/0xbe ---[ end trace 166c865cec7688e7 ]--- [CAUSE] The error number -27 is -EFBIG, returned from the following call chain: btrfs_end_transaction() |- __btrfs_end_transaction() |- btrfs_create_pending_block_groups() |- btrfs_finish_chunk_alloc() |- btrfs_add_system_chunk() This happens because we have used up all space of btrfs_super_block::sys_chunk_array. The root cause is, we have the following bad loop of creating tons of system chunks: 1. The only SYSTEM chunk is being scrubbed It's very common to have only one SYSTEM chunk. 2. New SYSTEM bg will be allocated As btrfs_inc_block_group_ro() will check if we have enough space after marking current bg RO. If not, then allocate a new chunk. 3. New SYSTEM bg is still empty, will be reclaimed During the reclaim, we will mark it RO again. 4. That newly allocated empty SYSTEM bg get scrubbed We go back to step 2, as the bg is already mark RO but still not cleaned up yet. If the cleaner kthread doesn't get executed fast enough (e.g. only one CPU), then we will get more and more empty SYSTEM chunks, using up all the space of btrfs_super_block::sys_chunk_array. [FIX] Since scrub/dev-replace doesn't always need to allocate new extent, especially chunk tree extent, so we don't really need to do chunk pre-allocation. To break above spiral, here we introduce a new parameter to btrfs_inc_block_group(), @do_chunk_alloc, which indicates whether we need extra chunk pre-allocation. For relocation, we pass @do_chunk_alloc=true, while for scrub, we pass @do_chunk_alloc=false. This should keep unnecessary empty chunks from popping up for scrub. Also, since there are two parameters for btrfs_inc_block_group_ro(), add more comment for it. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: change btrfs_fs_devices::rotating to boolJohannes Thumshirn
struct btrfs_fs_devices::rotating currently is declared as an integer variable but only used as a boolean. Change the variable definition to bool and update to code touching it to set 'true' and 'false'. Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: change btrfs_fs_devices::seeding to boolJohannes Thumshirn
struct btrfs_fs_devices::seeding currently is declared as an integer variable but only used as a boolean. Change the variable definition to bool and update to code touching it to set 'true' and 'false'. Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: rename btrfs_block_group_cacheDavid Sterba
The type name is misleading, a single entry is named 'cache' while this normally means a collection of objects. Rename that everywhere. Also the identifier was quite long, making function prototypes harder to format. Suggested-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: block-group: Reuse the item key from caller of read_one_block_group()Qu Wenruo
For read_one_block_group(), its only caller has already got the item key to search next block group item. So we can use that key directly without doing our own convertion on stack. Also, since that key used in btrfs_read_block_groups() is vital for block group item search, add 'const' keyword for that parameter to prevent read_one_block_group() to modify it. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: block-group: Refactor btrfs_read_block_groups()Qu Wenruo
Refactor the work inside the loop of btrfs_read_block_groups() into one separate function, read_one_block_group(). This allows read_one_block_group to be reused for later BG_TREE feature. The refactor does the following extra fix: - Use btrfs_fs_incompat() to replace open-coded feature check Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: document extent buffer lockingDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: access eb::blocking_writers according to ACCESS_ONCE policiesDavid Sterba
A nice writeup of the LKMM (Linux Kernel Memory Model) rules for access once policies can be found here https://lwn.net/Articles/799218/#Access-Marking%20Policies . The locked and unlocked access to eb::blocking_writers should be annotated accordingly, following this: Writes: - locked write must use ONCE, may use plain read - unlocked write must use ONCE Reads: - unlocked read must use ONCE - locked read may use plain read iff not mixed with unlocked read - unlocked read then locked must use ONCE There's one difference on the assembly level, where btrfs_tree_read_lock_atomic and btrfs_try_tree_read_lock used the cached value and did not reevaluate it after taking the lock. This could have missed some opportunities to take the lock in case blocking writers changed between the calls, but the window is just a few instructions long. As this is in try-lock, the callers handle that. Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: set blocking_writers directly, no increment or decrementDavid Sterba
The increment and decrement was inherited from previous version that used atomics, switched in commit 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from atomic to int"). The only possible values are 0 and 1 so we can set them directly. The generated assembly (gcc 9.x) did the direct value assignment in btrfs_set_lock_blocking_write (asm diff after change in 06297d8cefca): 5d: test %eax,%eax 5f: je 62 <btrfs_set_lock_blocking_write+0x22> 61: retq - 62: lock incl 0x44(%rdi) - 66: add $0x50,%rdi - 6a: jmpq 6f <btrfs_set_lock_blocking_write+0x2f> + 62: movl $0x1,0x44(%rdi) + 69: add $0x50,%rdi + 6d: jmpq 72 <btrfs_set_lock_blocking_write+0x32> The part in btrfs_tree_unlock did a decrement because BUG_ON(blockers > 1) is probably not a strong hint for the compiler, but otherwise the output looks safe: - lock decl 0x44(%rdi) + sub $0x1,%eax + mov %eax,0x44(%rdi) Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: merge blocking_writers branches in btrfs_tree_read_lockDavid Sterba
There are two ifs that use eb::blocking_writers. As this is a variable modified inside and outside of locks, we could minimize number of accesses to avoid problems with getting different results at different times. The access here is locked so this can only race with btrfs_tree_unlock that sets blocking_writers to 0 without lock and unsets the lock owner. The first branch is taken only if the same thread already holds the lock, the second if checks for blocking writers. Here we'd either unlock and wait, or proceed. Both are valid states of the locking protocol. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: drop incompat bit for raid1c34 after last block group is goneDavid Sterba
When there are no raid1c3 or raid1c4 block groups left after balance (either convert or with other filters applied), remove the incompat bit. This is already done for RAID56, do the same for RAID1C34. Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: add incompat for raid1 with 3, 4 copiesDavid Sterba
The new raid1c3 and raid1c4 profiles are backward incompatible and the name shall be 'raid1c34', the status can be found in the global supported features in /sys/fs/btrfs/features or in the per-filesystem directory. Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: add support for 4-copy replication (raid1c4)David Sterba
Add new block group profile to store 4 copies in a simliar way that current RAID1 does. The profile attributes and constraints are defined in the raid table and used by the same code that already handles the 2- and 3-copy RAID1. The minimum number of devices is 4, the maximum number of devices/chunks that can be lost/damaged is 3. There is no comparable traditional RAID level, the profile is added for future needs to accompany triple-parity and beyond. Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: add support for 3-copy replication (raid1c3)David Sterba
Add new block group profile to store 3 copies in a simliar way that current RAID1 does. The profile attributes and constraints are defined in the raid table and used by the same code that already handles the 2-copy RAID1. The minimum number of devices is 3, the maximum number of devices/chunks that can be lost/damaged is 2. Like RAID6 but with 33% space utilization. Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: sink write flags to cow_file_range_asyncDavid Sterba
In commit "Btrfs: use REQ_CGROUP_PUNT for worker thread submitted bios", cow_file_range_async gained wbc as a parameter and this makes passing write flags redundant. Set it inside the function and remove the parameter. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: sink write_flags to __extent_writepage_ioDavid Sterba
__extent_writepage reads write flags from wbc and passes both to __extent_writepage_io. This makes write_flags redundant and we can remove it. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18Btrfs: send, skip backreference walking for extents with many referencesFilipe Manana
Backreference walking, which is used by send to figure if it can issue clone operations instead of write operations, can be very slow and use too much memory when extents have many references. This change simply skips backreference walking when an extent has more than 64 references, in which case we fallback to a write operation instead of a clone operation. This limit is conservative and in practice I observed no signicant slowdown with up to 100 references and still low memory usage up to that limit. This is a temporary workaround until there are speedups in the backref walking code, and as such it does not attempt to add extra interfaces or knobs to tweak the threshold. Reported-by: Atemu <atemu.main@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAE4GHgkvqVADtS4AzcQJxo0Q1jKQgKaW3JGp3SGdoinVo=C9eQ@mail.gmail.com/T/#me55dc0987f9cc2acaa54372ce0492c65782be3fa CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18Btrfs: send, allow clone operations within the same fileFilipe Manana
For send we currently skip clone operations when the source and destination files are the same. This is so because clone didn't support this case in its early days, but support for it was added back in May 2013 by commit a96fbc72884fcb ("Btrfs: allow file data clone within a file"). This change adds support for it. Example: $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt/sdd $ xfs_io -f -c "pwrite -S 0xab -b 64K 0 64K" /mnt/sdd/foobar $ xfs_io -c "reflink /mnt/sdd/foobar 0 64K 64K" /mnt/sdd/foobar $ btrfs subvolume snapshot -r /mnt/sdd /mnt/sdd/snap $ mkfs.btrfs -f /dev/sde $ mount /dev/sde /mnt/sde $ btrfs send /mnt/sdd/snap | btrfs receive /mnt/sde Without this change file foobar at the destination has a single 128Kb extent: $ filefrag -v /mnt/sde/snap/foobar Filesystem type is: 9123683e File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 31: 0.. 31: 32: last,unknown_loc,delalloc,eof /mnt/sde/snap/foobar: 1 extent found With this we get a single 64Kb extent that is shared at file offsets 0 and 64K, just like in the source filesystem: $ filefrag -v /mnt/sde/snap/foobar Filesystem type is: 9123683e File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 15: 3328.. 3343: 16: shared 1: 16.. 31: 3328.. 3343: 16: 3344: last,shared,eof /mnt/sde/snap/foobar: 2 extents found Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: Ensure we trim ranges across block group boundaryQu Wenruo
[BUG] When deleting large files (which cross block group boundary) with discard mount option, we find some btrfs_discard_extent() calls only trimmed part of its space, not the whole range: btrfs_discard_extent: type=0x1 start=19626196992 len=2144530432 trimmed=1073741824 ratio=50% type: bbio->map_type, in above case, it's SINGLE DATA. start: Logical address of this trim len: Logical length of this trim trimmed: Physically trimmed bytes ratio: trimmed / len Thus leaving some unused space not discarded. [CAUSE] When discard mount option is specified, after a transaction is fully committed (super block written to disk), we begin to cleanup pinned extents in the following call chain: btrfs_commit_transaction() |- btrfs_finish_extent_commit() |- find_first_extent_bit(unpin, 0, &start, &end, EXTENT_DIRTY); |- btrfs_discard_extent() However, pinned extents are recorded in an extent_io_tree, which can merge adjacent extent states. When a large file gets deleted and it has adjacent file extents across block group boundary, we will get a large merged range like this: |<--- BG1 --->|<--- BG2 --->| |//////|<-- Range to discard --->|/////| To discard that range, we have the following calls: btrfs_discard_extent() |- btrfs_map_block() | Returned bbio will end at BG1's end. As btrfs_map_block() | never returns result across block group boundary. |- btrfs_issuse_discard() Issue discard for each stripe. So we will only discard the range in BG1, not the remaining part in BG2. Furthermore, this bug is not that reliably observed, for above case, if there is no other extent in BG2, BG2 will be empty and btrfs will trim all space of BG2, covering up the bug. [FIX] - Allow __btrfs_map_block_for_discard() to modify @length parameter btrfs_map_block() uses its @length paramter to notify the caller how many bytes are mapped in current call. With __btrfs_map_block_for_discard() also modifing the @length, btrfs_discard_extent() now understands when to do extra trim. - Call btrfs_map_block() in a loop until we hit the range end Since we now know how many bytes are mapped each time, we can iterate through each block group boundary and issue correct trim for each range. Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: volumes: Use more straightforward way to calculate map lengthQu Wenruo
The old code goes: offset = logical - em->start; length = min_t(u64, em->len - offset, length); Where @length calculation is dependent on offset, it can take reader several more seconds to find it's just the same code as: offset = logical - em->start; length = min_t(u64, em->start + em->len - logical, length); Use above code to make the length calculate independent from other variable, thus slightly increase the readability. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit (git 2.34.1) at 2025-09-12 05:24:11 +0000