summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-21MAINTAINERS: fix DWMAC S32 entryJakub Kicinski
Using L: with more than a bare email address causes getmaintainer.pl to be unable to parse the entry. Fix this by doing as other entries that use this email address and convert it to an R: entry. Link: https://patch.msgid.link/20250221005012.1051897-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: cadence: macb: Implement BQLSean Anderson
Implement byte queue limits to allow queuing disciplines to account for packets enqueued in the ring buffer but not yet transmitted. There are a separate set of transmit functions for AT91 that I haven't touched since I don't have hardware to test on. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20250220164257.96859-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: cadence: macb: Synchronize stats calculationsSean Anderson
Stats calculations involve a RMW to add the stat update to the existing value. This is currently not protected by any synchronization mechanism, so data races are possible. Add a spinlock to protect the update. The reader side could be protected using u64_stats, but we would still need a spinlock for the update side anyway. And we always do an update immediately before reading the stats anyway. Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20250220162950.95941-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21ipvlan: ensure network headers are in skb linear partEric Dumazet
syzbot found that ipvlan_process_v6_outbound() was assuming the IPv6 network header isis present in skb->head [1] Add the needed pskb_network_may_pull() calls for both IPv4 and IPv6 handlers. [1] BUG: KMSAN: uninit-value in __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47 __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47 ipv6_addr_type include/net/ipv6.h:555 [inline] ip6_route_output_flags_noref net/ipv6/route.c:2616 [inline] ip6_route_output_flags+0x51/0x720 net/ipv6/route.c:2651 ip6_route_output include/net/ip6_route.h:93 [inline] ipvlan_route_v6_outbound+0x24e/0x520 drivers/net/ipvlan/ipvlan_core.c:476 ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:491 [inline] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:541 [inline] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:605 [inline] ipvlan_queue_xmit+0xd72/0x1780 drivers/net/ipvlan/ipvlan_core.c:671 ipvlan_start_xmit+0x5b/0x210 drivers/net/ipvlan/ipvlan_main.c:223 __netdev_start_xmit include/linux/netdevice.h:5150 [inline] netdev_start_xmit include/linux/netdevice.h:5159 [inline] xmit_one net/core/dev.c:3735 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3751 sch_direct_xmit+0x399/0xd40 net/sched/sch_generic.c:343 qdisc_restart net/sched/sch_generic.c:408 [inline] __qdisc_run+0x14da/0x35d0 net/sched/sch_generic.c:416 qdisc_run+0x141/0x4d0 include/net/pkt_sched.h:127 net_tx_action+0x78b/0x940 net/core/dev.c:5484 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 do_softirq+0x9a/0x100 kernel/softirq.c:462 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4611 dev_queue_xmit include/linux/netdevice.h:3311 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3132 [inline] packet_sendmsg+0x93e0/0xa7e0 net/packet/af_packet.c:3164 sock_sendmsg_nosec net/socket.c:718 [inline] Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Reported-by: syzbot+93ab4a777bafb9d9f960@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67b74f01.050a0220.14d86d.02d8.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Link: https://patch.msgid.link/20250220155336.61884-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: stmmac: print stmmac_init_dma_engine() errors using netdev_err()Russell King (Oracle)
stmmac_init_dma_engine() uses dev_err() which leads to errors being reported as e.g: dwc-eth-dwmac 2490000.ethernet: Failed to reset the dma dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed stmmac_init_dma_engine() is only called from stmmac_hw_setup() which itself uses netdev_err(), and we will have a net_device setup. So, change the dev_err() to netdev_err() to give consistent error messages. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tl5y1-004UgG-8X@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: set the minimum for net_hotdata.netdev_budget_usecsJiri Slaby (SUSE)
Commit 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") added a possibility to set net_hotdata.netdev_budget_usecs, but added no lower bound checking. Commit a4837980fd9f ("net: revert default NAPI poll timeout to 2 jiffies") made the *initial* value HZ-dependent, so the initial value is at least 2 jiffies even for lower HZ values (2 ms for 1000 Hz, 8ms for 250 Hz, 20 ms for 100 Hz). But a user still can set improper values by a sysctl. Set .extra1 (the lower bound) for net_hotdata.netdev_budget_usecs to the same value as in the latter commit. That is to 2 jiffies. Fixes: a4837980fd9f ("net: revert default NAPI poll timeout to 2 jiffies") Fixes: 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Dmitry Yakunin <zeil@yandex-team.ru> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Link: https://patch.msgid.link/20250220110752.137639-1-jirislaby@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21selftests: fib_nexthops: do not mark skipped tests as failedHangbin Liu
The current test marks all unexpected return values as failed and sets ret to 1. If a test is skipped, the entire test also returns 1, incorrectly indicating failure. To fix this, add a skipped variable and set ret to 4 if it was previously 0. Otherwise, keep ret set to 1. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20250220085326.1512814-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge branch 'net-fib_rules-add-dscp-mask-support'Jakub Kicinski
Ido Schimmel says: ==================== net: fib_rules: Add DSCP mask support In some deployments users would like to encode path information into certain bits of the IPv6 flow label, the UDP source port and the DSCP field and use this information to route packets accordingly. Redirecting traffic to a routing table based on specific bits in the DSCP field is not currently possible. Only exact match is currently supported by FIB rules. This patchset extends FIB rules to match on the DSCP field with an optional mask. Patches #1-#5 gradually extend FIB rules to match on the DSCP field with an optional mask. Patch #6 adds test cases for the new functionality. iproute2 support can be found here [1]. [1] https://github.com/idosch/iproute2/tree/submit/fib_rule_mask_v1 ==================== Link: https://patch.msgid.link/20250220080525.831924-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21selftests: fib_rule_tests: Add DSCP mask match testsIdo Schimmel
Add tests for FIB rules that match on DSCP with a mask. Test both good and bad flows and both the input and output paths. # ./fib_rule_tests.sh IPv6 FIB rule tests [...] TEST: rule6 check: dscp redirect to table [ OK ] TEST: rule6 check: dscp no redirect to table [ OK ] TEST: rule6 del by pref: dscp redirect to table [ OK ] TEST: rule6 check: iif dscp redirect to table [ OK ] TEST: rule6 check: iif dscp no redirect to table [ OK ] TEST: rule6 del by pref: iif dscp redirect to table [ OK ] TEST: rule6 check: dscp masked redirect to table [ OK ] TEST: rule6 check: dscp masked no redirect to table [ OK ] TEST: rule6 del by pref: dscp masked redirect to table [ OK ] TEST: rule6 check: iif dscp masked redirect to table [ OK ] TEST: rule6 check: iif dscp masked no redirect to table [ OK ] TEST: rule6 del by pref: iif dscp masked redirect to table [ OK ] [...] Tests passed: 316 Tests failed: 0 Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20250220080525.831924-7-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21netlink: specs: Add FIB rule DSCP mask attributeIdo Schimmel
Add new DSCP mask attribute to the spec. Example: # ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \ --do newrule \ --json '{"family": 2, "dscp": 10, "dscp-mask": 63, "action": 1, "table": 1}' None $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \ --dump getrule --json '{"family": 2}' --output-json | jq '.[]' [...] { "table": 1, "suppress-prefixlen": "0xffffffff", "protocol": 0, "priority": 32765, "dscp": 10, "dscp-mask": "0x3f", "family": 2, "dst-len": 0, "src-len": 0, "tos": 0, "action": "to-tbl", "flags": 0 } [...] Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20250220080525.831924-6-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: fib_rules: Enable DSCP mask usageIdo Schimmel
Allow user space to configure FIB rules that match on DSCP with a mask, now that support has been added to the IPv4 and IPv6 address families. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20250220080525.831924-5-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21ipv6: fib_rules: Add DSCP mask matchingIdo Schimmel
Extend IPv6 FIB rules to match on DSCP using a mask. Unlike IPv4, also initialize the DSCP mask when a non-zero 'tos' is specified as there is no difference in matching between 'tos' and 'dscp'. As a side effect, this makes it possible to match on 'dscp 0', like in IPv4. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20250220080525.831924-4-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21ipv4: fib_rules: Add DSCP mask matchingIdo Schimmel
Extend IPv4 FIB rules to match on DSCP using a mask. The mask is only set in rules that match on DSCP (not TOS) and initialized to cover the entire DSCP field if the mask attribute is not specified. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20250220080525.831924-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: fib_rules: Add DSCP mask attributeIdo Schimmel
Add an attribute that allows matching on DSCP with a mask. Matching on DSCP with a mask is needed in deployments where users encode path information into certain bits of the DSCP field. Temporarily set the type of the attribute to 'NLA_REJECT' while support is being added. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20250220080525.831924-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: loopback: Avoid sending IP packets without an Ethernet headerIdo Schimmel
After commit 22600596b675 ("ipv4: give an IPv4 dev to blackhole_netdev") IPv4 neighbors can be constructed on the blackhole net device, but they are constructed with an output function (neigh_direct_output()) that simply calls dev_queue_xmit(). The latter will transmit packets via 'skb->dev' which might not be the blackhole net device if dst_dev_put() switched 'dst->dev' to the blackhole net device while another CPU was using the dst entry in ip_output(), but after it already initialized 'skb->dev' from 'dst->dev'. Specifically, the following can happen: CPU1 CPU2 udp_sendmsg(sk1) udp_sendmsg(sk2) udp_send_skb() [...] ip_output() skb->dev = skb_dst(skb)->dev dst_dev_put() dst->dev = blackhole_netdev ip_finish_output2() resolves neigh on dst->dev neigh_output() neigh_direct_output() dev_queue_xmit() This will result in IPv4 packets being sent without an Ethernet header via a valid net device: tcpdump: verbose output suppressed, use -v[v]... for full protocol decode listening on enp9s0, link-type EN10MB (Ethernet), snapshot length 262144 bytes 22:07:02.329668 20:00:40:11:18:fb > 45:00:00:44:f4:94, ethertype Unknown (0x58c6), length 68: 0x0000: 8dda 74ca f1ae ca6c ca6c 0098 969c 0400 ..t....l.l...... 0x0010: 0000 4730 3f18 6800 0000 0000 0000 9971 ..G0?.h........q 0x0020: c4c9 9055 a157 0a70 9ead bf83 38ca ab38 ...U.W.p....8..8 0x0030: 8add ab96 e052 .....R Fix by making sure that neighbors are constructed on top of the blackhole net device with an output function that simply consumes the packets, in a similar fashion to dst_discard_out() and blackhole_netdev_xmit(). Fixes: 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to invalidate dst entries") Fixes: 22600596b675 ("ipv4: give an IPv4 dev to blackhole_netdev") Reported-by: Florian Meister <fmei@sfs.com> Closes: https://lore.kernel.org/netdev/20250210084931.23a5c2e4@hermes.local/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250220072559.782296-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: better track kernel sockets lifetimeEric Dumazet
While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls. This then trigger the following warning from ref_tracker_dir_exit() [1] To fix this, make sure that kernel sockets own a reference on net->passive. Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one. [1] [ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.263918][ T35] sk_alloc+0x2b3/0x370 [ 136.263918][ T35] inet6_create+0x6ce/0x10f0 [ 136.263918][ T35] __sock_create+0x4c0/0xa30 [ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.263918][ T35] igmp6_net_init+0x39/0x390 [ 136.263918][ T35] ops_init+0x31e/0x590 [ 136.263918][ T35] setup_net+0x287/0x9e0 [ 136.263918][ T35] copy_net_ns+0x33f/0x570 [ 136.263918][ T35] create_new_namespaces+0x425/0x7b0 [ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.263918][ T35] ksys_unshare+0x57d/0xa70 [ 136.263918][ T35] __x64_sys_unshare+0x38/0x40 [ 136.263918][ T35] do_syscall_64+0xf3/0x230 [ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 136.263918][ T35] [ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.343488][ T35] sk_alloc+0x2b3/0x370 [ 136.343488][ T35] inet6_create+0x6ce/0x10f0 [ 136.343488][ T35] __sock_create+0x4c0/0xa30 [ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0 [ 136.343488][ T35] ops_init+0x31e/0x590 [ 136.343488][ T35] setup_net+0x287/0x9e0 [ 136.343488][ T35] copy_net_ns+0x33f/0x570 [ 136.343488][ T35] create_new_namespaces+0x425/0x7b0 [ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.343488][ T35] ksys_unshare+0x57d/0xa70 [ 136.343488][ T35] __x64_sys_unshare+0x38/0x40 [ 136.343488][ T35] do_syscall_64+0xf3/0x230 [ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 0cafd77dcd03 ("net: add a refcount tracker for kernel sockets") Reported-by: syzbot+30a19e01a97420719891@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67b72aeb.050a0220.14d86d.0283.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250220131854.4048077-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Martin KaFai Lau says: ==================== pull-request: bpf-next 2025-02-20 We've added 19 non-merge commits during the last 8 day(s) which contain a total of 35 files changed, 1126 insertions(+), 53 deletions(-). The main changes are: 1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing 2) Add network TX timestamping support to BPF sock_ops, from Jason Xing 3) Add TX metadata Launch Time support, from Song Yoong Siang * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: igc: Add launch time support to XDP ZC igc: Refactor empty frame insertion for launch time support net: stmmac: Add launch time support to XDP ZC selftests/bpf: Add launch time request to xdp_hw_metadata xsk: Add launch time hardware offload support to XDP Tx metadata selftests/bpf: Add simple bpf tests in the tx path for timestamping feature bpf: Support selective sampling for bpf timestamping bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING bpf: Disable unsafe helpers in TX timestamping callbacks bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping bpf: Add networking timestamping support to bpf_get/setsockopt() selftests/bpf: Add rto max for bpf_setsockopt test bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt ==================== Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge tag 'for-net-2025-02-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btusb: Always allow SCO packets for user channel - L2CAP: Fix L2CAP_ECRED_CONN_RSP response * tag 'for-net-2025-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Fix L2CAP_ECRED_CONN_RSP response Bluetooth: Always allow SCO packets for user channel ==================== Link: https://patch.msgid.link/20250221154941.2139043-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21gve: Add RSS cache for non RSS device option scenarioZiwei Xiao
Not all the devices have the capability for the driver to query for the registered RSS configuration. The driver can discover this by checking the relevant device option during setup. If it cannot, the driver needs to store the RSS config cache and directly return such cache when queried by the ethtool. RSS config is inited when driver probes. Also the default RSS config will be adjusted when there is RX queue count change. At this point, only keys of GVE_RSS_KEY_SIZE and indirection tables of GVE_RSS_INDIR_SIZE are supported. Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250219200451.3348166-1-jeroendb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net/rds: Replace deprecated strncpy() with strscpy_pad()Thorsten Blum
strncpy() is deprecated for NUL-terminated destination buffers. Use strscpy_pad() instead and remove the manual NUL-termination. Compile-tested only. Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Kees Cook <kees@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Tested-by: Allison Henderson <allison.henderson@oracle.com> Link: https://patch.msgid.link/20250219224730.73093-2-thorsten.blum@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge branch 'net-improve-netns-handling-in-rtnetlink'Jakub Kicinski
Xiao Liang says: ==================== net: Improve netns handling in rtnetlink This patch series includes some netns-related improvements and fixes for rtnetlink, to make link creation more intuitive: 1) Creating link in another net namespace doesn't conflict with link names in current one. 2) Refector rtnetlink link creation. Create link in target namespace directly. So that # ip link add netns ns1 link-netns ns2 tun0 type gre ... will create tun0 in ns1, rather than create it in ns2 and move to ns1. And don't conflict with another interface named "tun0" in current netns. Patch 01 avoids link name conflict in different netns. To achieve 2), there're mainly 3 steps: - Patch 02 packs newlink() parameters into a struct, including the original "src_net" along with more netns context. No semantic changes are introduced. - Patch 03 ~ 09 converts device drivers to use the explicit netns extracted from params. - Patch 10 ~ 11 removes the old netns parameter, and converts rtnetlink to create device in target netns directly. Patch 12 ~ 13 adds some tests for link name and link netns. --- Please note there're some issues found in current code: - In amt_newlink() drivers/net/amt.c: amt->net = net; ... amt->stream_dev = dev_get_by_index(net, ... Uses net, but amt_lookup_upper_dev() only searches in dev_net. So the AMT device may not be properly deleted if it's in a different netns from lower dev. - In lowpan_newlink() in net/ieee802154/6lowpan/core.c: wdev = dev_get_by_index(dev_net(ldev), nla_get_u32(tb[IFLA_LINK])); Looks for IFLA_LINK in dev_net, but in theory the ifindex is defined in link netns. And thanks to Kuniyuki for fixing related issues in gtp and pfcp: https://lore.kernel.org/netdev/20250110014754.33847-1-kuniyu@amazon.com/ v9: https://lore.kernel.org/20250210133002.883422-1-shaw.leon@gmail.com v8: https://lore.kernel.org/20250113143719.7948-1-shaw.leon@gmail.com v7: https://lore.kernel.org/20250104125732.17335-1-shaw.leon@gmail.com v6: https://lore.kernel.org/20241218130909.2173-1-shaw.leon@gmail.com v5: https://lore.kernel.org/20241209140151.231257-1-shaw.leon@gmail.com v4: https://lore.kernel.org/20241118143244.1773-1-shaw.leon@gmail.com v3: https://lore.kernel.org/20241113125715.150201-1-shaw.leon@gmail.com v2: https://lore.kernel.org/20241107133004.7469-1-shaw.leon@gmail.com v1: https://lore.kernel.org/20241023023146.372653-1-shaw.leon@gmail.com ==================== Link: https://patch.msgid.link/20250219125039.18024-1-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21selftests: net: Add test cases for link and peer netnsXiao Liang
- Add test for creating link in another netns when a link of the same name and ifindex exists in current netns. - Add test to verify that link is created in target netns directly - no link new/del events should be generated in link netns or current netns. - Add test cases to verify that link-netns is set as expected for various drivers and combination of namespace-related parameters. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Link: https://patch.msgid.link/20250219125039.18024-14-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21selftests: net: Add python context manager for netns enteringXiao Liang
Change netns of current thread and switch back on context exit. For example: with NetNSEnter("ns1"): ip("link add dummy0 type dummy") The command be executed in netns "ns1". Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Link: https://patch.msgid.link/20250219125039.18024-13-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rtnetlink: Create link directly in target net namespaceXiao Liang
Make rtnl_newlink_create() create device in target namespace directly. Avoid extra netns change when link netns is provided. Device drivers has been converted to be aware of link netns, that is not assuming device netns is and link netns is the same when ops->newlink() is called. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-12-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rtnetlink: Remove "net" from newlink paramsXiao Liang
Now that devices have been converted to use the specific netns instead of ambiguous "net", let's remove it from newlink parameters. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-11-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: xfrm: Use link netns in newlink() of rtnl_link_opsXiao Liang
When link_net is set, use it as link netns instead of dev_net(). This prepares for rtnetlink core to create device in target netns directly, in which case the two namespaces may be different. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-10-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: ipv6: Use link netns in newlink() of rtnl_link_opsXiao Liang
When link_net is set, use it as link netns instead of dev_net(). This prepares for rtnetlink core to create device in target netns directly, in which case the two namespaces may be different. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-9-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: ipv6: Init tunnel link-netns before registering devXiao Liang
Currently some IPv6 tunnel drivers set tnl->net to dev_net(dev) in ndo_init(), which is called in register_netdevice(). However, it lacks the context of link-netns when we enable cross-net tunnels at device registration time. Let's move the init of tunnel link-netns before register_netdevice(). ip6_gre has already initialized netns, so just remove the redundant assignment. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-8-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: ip_tunnel: Use link netns in newlink() of rtnl_link_opsXiao Liang
When link_net is set, use it as link netns instead of dev_net(). This prepares for rtnetlink core to create device in target netns directly, in which case the two namespaces may be different. Convert common ip_tunnel_newlink() to accept an extra link netns argument. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-7-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: ip_tunnel: Don't set tunnel->net in ip_tunnel_init()Xiao Liang
ip_tunnel_init() is called from register_netdevice(). In all code paths reaching here, tunnel->net should already have been set (either in ip_tunnel_newlink() or __ip_tunnel_create()). So don't set it again. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-6-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21ieee802154: 6lowpan: Validate link netns in newlink() of rtnl_link_opsXiao Liang
Device denoted by IFLA_LINK is in link_net (IFLA_LINK_NETNSID) or source netns by design, but 6lowpan uses dev_net. Note dev->netns_local is set to true and currently link_net is implemented via a netns change. These together effectively reject IFLA_LINK_NETNSID. This patch adds a validation to ensure link_net is either NULL or identical to dev_net. Thus it would be fine to continue using dev_net when rtnetlink core begins to create devices directly in target netns. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-5-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: Use link/peer netns in newlink() of rtnl_link_opsXiao Liang
Add two helper functions - rtnl_newlink_link_net() and rtnl_newlink_peer_net() for netns fallback logic. Peer netns falls back to link netns, and link netns falls back to source netns. Convert the use of params->net in netdevice drivers to one of the helper functions for clarity. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-4-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rtnetlink: Pack newlink() params into structXiao Liang
There are 4 net namespaces involved when creating links: - source netns - where the netlink socket resides, - target netns - where to put the device being created, - link netns - netns associated with the device (backend), - peer netns - netns of peer device. Currently, two nets are passed to newlink() callback - "src_net" parameter and "dev_net" (implicitly in net_device). They are set as follows, depending on netlink attributes in the request. +------------+-------------------+---------+---------+ | peer netns | IFLA_LINK_NETNSID | src_net | dev_net | +------------+-------------------+---------+---------+ | | absent | source | target | | absent +-------------------+---------+---------+ | | present | link | link | +------------+-------------------+---------+---------+ | | absent | peer | target | | present +-------------------+---------+---------+ | | present | peer | link | +------------+-------------------+---------+---------+ When IFLA_LINK_NETNSID is present, the device is created in link netns first and then moved to target netns. This has some side effects, including extra ifindex allocation, ifname validation and link events. These could be avoided if we create it in target netns from the beginning. On the other hand, the meaning of src_net parameter is ambiguous. It varies depending on how parameters are passed. It is the effective link (or peer netns) by design, but some drivers ignore it and use dev_net instead. To provide more netns context for drivers, this patch packs existing newlink() parameters, along with the source netns, link netns and peer netns, into a struct. The old "src_net" is renamed to "net" to avoid confusion with real source netns, and will be deprecated later. The use of src_net are converted to params->net trivially. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rtnetlink: Lookup device in target netns when creating linkXiao Liang
When creating link, lookup for existing device in target net namespace instead of current one. For example, two links created by: # ip link add dummy1 type dummy # ip link add netns ns1 dummy1 type dummy should have no conflict since they are in different namespaces. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-2-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge branch 'dt-bindings-net-realtek-rtl9301-switch'Jakub Kicinski
Chris Packham says: ==================== dt-bindings: net: realtek,rtl9301-switch (schema part) This is my attempt at trying to sort out the mess I've created with the RTL9300 switch dt-bindings. Some context is available on [1] and [2]. The first patch just moves the binding from mfd/ to net/ (with an adjustment of the internal path name). The next two patches are successors to patches already sent as part of the series [3]. [1] - https://lore.kernel.org/lkml/20250204-eccentric-deer-of-felicity-02b7ee@krzk-bin/ [2] - https://lore.kernel.org/lkml/4e3c5d83-d215-4eff-bf02-6d420592df8f@alliedtelesis.co.nz/ [3] - https://lore.kernel.org/lkml/20250204030249.1965444-1-chris.packham@alliedtelesis.co.nz/ ==================== Link: https://patch.msgid.link/20250218195216.1034220-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21dt-bindings: net: Add Realtek MDIO controllerChris Packham
Add dtschema for the MDIO controller found in the RTL9300 Ethernet switch. The controller is slightly unusual in that direct MDIO communication is not possible. We model the MDIO controller with the MDIO buses as child nodes and the PHYs as children of the buses. The mapping of switch port number to MDIO bus/addr requires the ethernet-ports sibling to provide the mapping via the phy-handle property. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250218195216.1034220-4-chris.packham@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21dt-bindings: net: Add switch ports and interrupts to RTL9300Chris Packham
Add bindings for the ethernet-switch and interrupt properties for the RTL9300. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250218195216.1034220-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21dt-bindings: net: Move realtek,rtl9301-switch to netChris Packham
Initially realtek,rtl9301-switch was placed under mfd/ because it had some non-switch related blocks (specifically i2c and reset) but with a bit more review it has become apparent that this was wrong and the binding should live under net/. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250218195216.1034220-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge branch 'rxrpc-afs-miscellaneous-fixes'Jakub Kicinski
David Howells says: ==================== rxrpc, afs: Miscellaneous fixes Here are some miscellaneous fixes for rxrpc and afs: (1) In the rxperf test server, make it correctly receive and decode the terminal magic cookie. (2) In rxrpc, get rid of the peer->mtu_lock as it is not only redundant, it now causes a lockdep complaint. (3) In rxrpc, fix a lockdep-detected instance where a spinlock is being bh-locked whilst irqs are disabled. (4) In afs, fix the ref of a server displaced from an afs_server_list struct. (5) In afs, make afs_server records belonging to a cell take refs on the afs_cell record so that the latter doesn't get deleted first when that cell is being destroyed. ==================== Link: https://patch.msgid.link/20250218192250.296870-1-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21afs: Give an afs_server object a ref on the afs_cell object it points toDavid Howells
Give an afs_server object a ref on the afs_cell object it points to so that the cell doesn't get deleted before the server record. Whilst this is circular (cell -> vol -> server_list -> server -> cell), the ref only pins the memory, not the lifetime as that's controlled by the activity counter. When the volume's activity counter reaches 0, it detaches from the cell and discards its server list; when a cell's activity counter reaches 0, it discards its root volume. At that point, the circularity is cut. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250218192250.296870-6-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21afs: Fix the server_list to unuse a displaced server rather than putting itDavid Howells
When allocating and building an afs_server_list struct object from a VLDB record, we look up each server address to get the server record for it - but a server may have more than one entry in the record and we discard the duplicate pointers. Currently, however, when we discard, we only put a server record, not unuse it - but the lookup got as an active-user count. The active-user count on an afs_server_list object determines its lifetime whereas the refcount keeps the memory backing it around. Failing to reduce the active-user counter prevents the record from being cleaned up and can lead to multiple copied being seen - and pointing to deleted afs_cell objects and other such things. Fix this by switching the incorrect 'put' to an 'unuse' instead. Without this, occasionally, a dead server record can be seen in /proc/net/afs/servers and list corruption may be observed: list_del corruption. prev->next should be ffff888102423e40, but was 0000000000000000. (prev=ffff88810140cd38) Fixes: 977e5f8ed0ab ("afs: Split the usage count on struct afs_server") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250218192250.296870-5-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rxrpc: Fix locking issues with the peer record hashDavid Howells
rxrpc_new_incoming_peer() can't use spin_lock_bh() whilst its caller has interrupts disabled. WARNING: CPU: 0 PID: 1550 at kernel/softirq.c:369 __local_bh_enable_ip+0x46/0xd0 ... Call Trace: rxrpc_alloc_incoming_call+0x1b0/0x400 rxrpc_new_incoming_call+0x1dd/0x5e0 rxrpc_input_packet+0x84a/0x920 rxrpc_io_thread+0x40d/0xb40 kthread+0x2ec/0x300 ret_from_fork+0x24/0x40 ret_from_fork_asm+0x1a/0x30 </TASK> irq event stamp: 1811 hardirqs last enabled at (1809): _raw_spin_unlock_irq+0x24/0x50 hardirqs last disabled at (1810): _raw_read_lock_irq+0x17/0x70 softirqs last enabled at (1182): handle_softirqs+0x3ee/0x430 softirqs last disabled at (1811): rxrpc_new_incoming_peer+0x56/0x120 Fix this by using a plain spin_lock() instead. IRQs are held, so softirqs can't happen. Fixes: a2ea9a907260 ("rxrpc: Use irq-disabling spinlocks between app and I/O thread") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250218192250.296870-4-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rxrpc: peer->mtu_lock is redundantDavid Howells
The peer->mtu_lock is only used to lock around writes to peer->max_data - and nothing else; further, all such writes take place in the I/O thread and the lock is only ever write-locked and never read-locked. In a couple of places, the write_seqcount_begin() is wrapped in preempt_disable/enable(), but not in all places. This can cause lockdep to complain: WARNING: CPU: 0 PID: 1549 at include/linux/seqlock.h:221 rxrpc_input_ack_trailer+0x305/0x430 ... RIP: 0010:rxrpc_input_ack_trailer+0x305/0x430 Fix this by just getting rid of the lock. Fixes: eeaedc5449d9 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250218192250.296870-3-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rxrpc: rxperf: Fix missing decoding of terminal magic cookieDavid Howells
The rxperf RPCs seem to have a magic cookie at the end of the request that was failing to be taken account of by the unmarshalling of the request. Fix the rxperf code to expect this. Fixes: 75bfdbf2fca3 ("rxrpc: Implement an in-kernel rxperf server for testing purposes") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250218192250.296870-2-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: sfp: add quirk for 2.5G OEM BX SFPBirger Koblitz
The OEM SFP-2.5G-BX10-D/U SFP module pair is meant to operate with 2500Base-X. However, in their EEPROM they incorrectly specify: Transceiver codes : 0x00 0x12 0x00 0x00 0x12 0x00 0x01 0x05 0x00 BR, Nominal : 2500MBd Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway. Tested on BananaPi R3. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/20250218-b4-lkmsub-v1-1-1e51dcabed90@birger-koblitz.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge tag 'soc-fixes-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "Two people stepped up as platform co-maintainers: Andrew Jeffery for ASpeed and Janne Grunau for Apple. The rockchip platform gets 9 small fixes for devicetree files, addressing both compile-time warnings and board specific bugs. One bugfix for the optee firmware driver addresses a reboot-time hang. Two drivers need improved Kconfig dependencies to allow wider compile- testing while hiding the drivers on platforms that can't use them. ARM SCMI and loongson-guts drivers get minor bugfixes" * tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: loongson: loongson2_guts: Add check for devm_kstrdup() tee: optee: Fix supplicant wait loop platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC MAINTAINERS: arm: apple: Add Janne as maintainer MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set arm64: dts: rockchip: adjust SMMU interrupt type on rk3588 arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode dt-bindings: rockchip: pmu: Ensure all properties are defined arm64: defconfig: Enable TISCI Interrupt Router and Aggregator arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
2025-02-21Merge tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly drm fixes pull request, lots of small things all over, msm has a bunch of things but all very small, xe, i915, a fix for the cgroup dmem controller. core: - remove MAINTAINERS entry cgroup/dmem: - use correct function for pool descendants panel: - fix signal polarity issue jd9365da-h3 nouveau: - folio handling fix - config fix amdxdna: - fix missing header xe: - Fix error handling in xe_irq_install - Fix devcoredump format i915: - Use spin_lock_irqsave() in interruptible context on guc submission - Fixes on DDI and TRANS programming - Make sure all planes in use by the joiner have their crtc included - Fix 128b/132b modeset issues msm: - More catalog fixes: - to skip watchdog programming through top block if its not present - fix the setting of WB mask to ensure the WB input control is programmed correctly through ping-pong - drop lm_pair for sm6150 as that chipset does not have any 3dmerge block - Fix the mode validation logic for DP/eDP to account for widebus (2ppc) to allow high clock resolutions - Fix to disable dither during encoder disable as otherwise this was causing kms_writeback failure due to resource sharing between WB and DSI paths as DSI uses dither but WB does not - Fixes for virtual planes, namely to drop extraneous return and fix uninitialized variables - Fix to avoid spill-over of DSC encoder block bits when programming the bits-per-component - Fixes in the DSI PHY to protect against concurrent access of PHY_CMN_CLK_CFG regs between clock and display drivers - Core/GPU: - Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout - Only print GMU fw version once, instead of each time the GPU resumes" * tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernel: (28 commits) drm/i915/dp: Fix disabling the transcoder function in 128b/132b mode drm/i915/dp: Fix error handling during 128b/132b link training accel/amdxdna: Add missing include linux/slab.h MAINTAINERS: Remove myself drm/nouveau/pmu: Fix gp10b firmware guard cgroup/dmem: Don't open-code css_for_each_descendant_pre drm/xe/guc: Fix size_t print format drm/xe: Make GUC binaries dump consistent with other binaries in devcoredump drm/i915: Make sure all planes in use by the joiner have their crtc included drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro drm/xe: Fix error handling in xe_irq_install() drm/i915/gt: Use spin_lock_irqsave() in interruptible context drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driver drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver side drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes() drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields drm/msm/dpu: Disable dither in phys encoder cleanup drm/msm/dpu: Fix uninitialized variable ...
2025-02-21fbdev: hyperv_fb: iounmap() the correct memory when removing a deviceMichael Kelley
When a Hyper-V framebuffer device is removed, or the driver is unbound from a device, any allocated and/or mapped memory must be released. In particular, MMIO address space that was mapped to the framebuffer must be unmapped. Current code unmaps the wrong address, resulting in an error like: [ 4093.980597] iounmap: bad address 00000000c936c05c followed by a stack dump. Commit d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver") changed the kind of address stored in info->screen_base, and the iounmap() call in hvfb_putmem() was not updated accordingly. Fix this by updating hvfb_putmem() to unmap the correct address. Fixes: d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver") Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Link: https://lore.kernel.org/r/20250209235252.2987-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250209235252.2987-1-mhklinux@outlook.com>
2025-02-21Merge tag 'block-6.14-20250221' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - FC controller state check fixes (Daniel) - PCI Endpoint fixes (Damien) - TCP connection failure fixe (Caleb) - TCP handling C2HTermReq PDU (Maurizio) - RDMA queue state check (Ruozhu) - Apple controller fixes (Hector) - Target crash on disbaled namespace (Hannes) - MD pull request via Yu: - Fix queue limits error handling for raid0, raid1 and raid10 - Fix for a NULL pointer deref in request data mapping - Code cleanup for request merging * tag 'block-6.14-20250221' of git://git.kernel.dk/linux: nvme: only allow entering LIVE from CONNECTING state nvme-fc: rely on state transitions to handle connectivity loss apple-nvme: Support coprocessors left idle apple-nvme: Release power domains when probe fails nvmet: Use enum definitions instead of hardcoded values nvme: Cleanup the definition of the controller config register fields nvme/ioctl: add missing space in err message nvme-tcp: fix connect failure on receiving partial ICResp PDU nvme: tcp: Fix compilation warning with W=1 nvmet: pci-epf: Avoid RCU stalls under heavy workload nvmet: pci-epf: Do not uselessly write the CSTS register nvmet: pci-epf: Correctly initialize CSTS when enabling the controller nvmet-rdma: recheck queue state is LIVE in state lock in recv done nvmet: Fix crash when a namespace is disabled nvme-tcp: add basic support for the C2HTermReq PDU nvme-pci: quirk Acer FA100 for non-uniqueue identifiers block: fix NULL pointer dereferenced within __blk_rq_map_sg block/merge: remove unnecessary min() with UINT_MAX md/raid*: Fix the set_queue_limits implementations
2025-02-21Merge tag 'io_uring-6.14-20250221' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: - Series fixing an issue with multishot read on pollable files that may return -EIOCBQUEUED from ->read_iter(). Four small patches for that, the first one deliberately done in such a way that it'd be easy to backport - Remove some dead constant definitions - Use array_index_nospec() for opcode indexing - Work-around for worker creation retries in the presence of signals * tag 'io_uring-6.14-20250221' of git://git.kernel.dk/linux: io_uring/rw: clean up mshot forced sync mode io_uring/rw: move ki_complete init into prep io_uring/rw: don't directly use ki_complete io_uring/rw: forbid multishot async reads io_uring/rsrc: remove unused constants io_uring: fix spelling error in uapi io_uring.h io_uring: prevent opcode speculation io-wq: backoff when retrying worker creation
generated by cgit (git 2.34.1) at 2025-10-03 10:34:19 +0000