| Age | Commit message (Collapse) | Author |
|---|
|
From commit 634f1a7110b4 ("vsock: support sockmap"), `struct proto
vsock_proto`, defined in af_vsock.c, is not static anymore, since it's
used by vsock_bpf.c.
If CONFIG_BPF_SYSCALL is not defined, `make C=2` will print a warning:
$ make O=build C=2 W=1 net/vmw_vsock/
...
CC [M] net/vmw_vsock/af_vsock.o
CHECK ../net/vmw_vsock/af_vsock.c
../net/vmw_vsock/af_vsock.c:123:14: warning: symbol 'vsock_proto' was not declared. Should it be static?
Declare `vsock_proto` regardless of CONFIG_BPF_SYSCALL, since it's defined
in af_vsock.c, which is built regardless of CONFIG_BPF_SYSCALL.
Fixes: 634f1a7110b4 ("vsock: support sockmap")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20250703112329.28365-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netlink has this pattern in some places
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
atomic_add(skb->truesize, &sk->sk_rmem_alloc);
, which has the same problem fixed by commit 5a465a0da13e ("udp:
Fix multiple wraparounds of sk->sk_rmem_alloc.").
For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition
is always false as the two operands are of int.
Then, a single socket can eat as many skb as possible until OOM
happens, and we can see multiple wraparounds of sk->sk_rmem_alloc.
Let's fix it by using atomic_add_return() and comparing the two
variables as unsigned int.
Before:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
-1668710080 0 rtnl:nl_wraparound/293 *
After:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
2147483072 0 rtnl:nl_wraparound/290 *
^
`--- INT_MAX - 576
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Jason Baron <jbaron@akamai.com>
Closes: https://lore.kernel.org/netdev/cover.1750285100.git.jbaron@akamai.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250704054824.1580222-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Luo Jie says:
====================
Fix QCA808X WoL Issue
Restore WoL (Wake-on-LAN) enablement via MMD3 register 0x8012 BIT5 for
the QCA808X PHY. This change resolves the issue where WoL functionality
was not working due to its unintended removal in a previous commit.
Refactor at8031_set_wol() into a shared library to enable reuse of the
Wake-on-LAN (WoL) functionality by the AT8031, QCA807X and QCA808X PHY
drivers.
====================
Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-0-053342b1538d@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous commit unintentionally removed the code responsible for
enabling WoL via MMD3 register 0x8012 BIT5. As a result, Wake-on-LAN
(WoL) support for the QCA808X PHY is no longer functional.
The WoL (Wake-on-LAN) feature for the QCA808X PHY is enabled via MMD3
register 0x8012, BIT5. This implementation is aligned with the approach
used in at8031_set_wol().
Fixes: e58f30246c35 ("net: phy: at803x: fix the wol setting functions")
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-2-053342b1538d@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the WoL (Wake-on-LAN) functionality to a shared library to enable
its reuse by the QCA808X PHY driver, incorporating support for WoL
functionality similar to the implementation in at8031_set_wol().
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-1-053342b1538d@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a packet enters OVS datapath and there is no flow to handle it,
packet goes to userspace through a MISS upcall. With per-CPU upcall
dispatch mechanism, we're using the current CPU id to select the
Netlink PID on which to send this packet. This allows us to send
packets from the same traffic flow through the same handler.
The handler will process the packet, install required flow into the
kernel and re-inject the original packet via OVS_PACKET_CMD_EXECUTE.
While handling OVS_PACKET_CMD_EXECUTE, however, we may hit a
recirculation action that will pass the (likely modified) packet
through the flow lookup again. And if the flow is not found, the
packet will be sent to userspace again through another MISS upcall.
However, the handler thread in userspace is likely running on a
different CPU core, and the OVS_PACKET_CMD_EXECUTE request is handled
in the syscall context of that thread. So, when the time comes to
send the packet through another upcall, the per-CPU dispatch will
choose a different Netlink PID, and this packet will end up processed
by a different handler thread on a different CPU.
The process continues as long as there are new recirculations, each
time the packet goes to a different handler thread before it is sent
out of the OVS datapath to the destination port. In real setups the
number of recirculations can go up to 4 or 5, sometimes more.
There is always a chance to re-order packets while processing upcalls,
because userspace will first install the flow and then re-inject the
original packet. So, there is a race window when the flow is already
installed and the second packet can match it and be forwarded to the
destination before the first packet is re-injected. But the fact that
packets are going through multiple upcalls handled by different
userspace threads makes the reordering noticeably more likely, because
we not only have a race between the kernel and a userspace handler
(which is hard to avoid), but also between multiple userspace handlers.
For example, let's assume that 10 packets got enqueued through a MISS
upcall for handler-1, it will start processing them, will install the
flow into the kernel and start re-injecting packets back, from where
they will go through another MISS to handler-2. Handler-2 will install
the flow into the kernel and start re-injecting the packets, while
handler-1 continues to re-inject the last of the 10 packets, they will
hit the flow installed by handler-2 and be forwarded without going to
the handler-2, while handler-2 still re-injects the first of these 10
packets. Given multiple recirculations and misses, these 10 packets
may end up completely mixed up on the output from the datapath.
Let's allow userspace to specify on which Netlink PID the packets
should be upcalled while processing OVS_PACKET_CMD_EXECUTE.
This makes it possible to ensure that all the packets are processed
by the same handler thread in the userspace even with them being
upcalled multiple times in the process. Packets will remain in order
since they will be enqueued to the same socket and re-injected in the
same order. This doesn't eliminate re-ordering as stated above, since
we still have a race between kernel and the userspace thread, but it
allows to eliminate races between multiple userspace threads.
Userspace knows the PID of the socket on which the original upcall is
received, so there is no need to send it up from the kernel.
Solution requires storing the value somewhere for the duration of the
packet processing. There are two potential places for this: our skb
extension or the per-CPU storage. It's not clear which is better,
so just following currently used scheme of storing this kind of things
along the skb. We still have a decent amount of space in the cb.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250702155043.2331772-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since e110bc825897 ("net: usb: lan78xx: Convert to PHYLINK for improved
PHY and MAC management") this header isn't needed any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/626d389a-0f33-4b45-8949-ad53e89c36f5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a hardware reset method to recover from the SDIO bus error that cannot
be resolved by the current WiFi/BT subsystem reset.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250418093740.3814909-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable IEEE80211_HW_NO_VIRTUAL_MONITOR to ensure the driver is notified of
all monitor interfaces and their channels.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250625075611.1407687-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Since the page_pool for MT76 MMIO devices are created with
PP_FLAG_DMA_SYNC_DEV flag, we do not need to sync_for_device each page
received from the pool since it is already done by the page_pool
codebase.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250625-mt76-sync-for-device-v1-1-e687e3278e1a@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move phy num_sta accounting in mt7996_mac_sta_add() and
mt7996_mac_sta_remove() routines in order to take into account all
possibles MLO links.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-9-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Generalize mt7996_tx_check_aggr() and mt7996_txwi_free() routines to
introduce MLO support for MT7996 driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-8-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
sta->valid_links bitmask can be set even for non-MLO client.
Fixes: dd82a9e02c054 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-7-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fis possible Out-Of-Boundary access in mt7996_tx routine if link_id is
set to IEEE80211_LINK_UNSPECIFIED
Fixes: 3ce8acb86b661 ("wifi: mt76: mt7996: Update mt7996_tx to MLO support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-6-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use proper link_id in mt7996_tx_prepare_skb routine for mlink lookup.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-5-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
msta_link->wcid.sta is already set to 1 in mt7996_mac_sta_init_link
routine.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-4-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt7996_mcu_sta_mld_setup_tlv()
Reuse for_each_sta_active_link utility macro in
mt7996_mcu_sta_mld_setup_tlv routine.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-3-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use proper link_id value for secondary link lookup in
mt7996_mcu_sta_mld_setup_tlv routine.
Fixes: 00cef41d9d8f5 ("wifi: mt76: mt7996: Add mt7996_mcu_sta_mld_setup_tlv() and mt7996_mcu_sta_eht_mld_tlv()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-2-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reuse the vif deflink for link_id = 0 in order to avoid confusion with
vif->bss_conf, which also gets a link id of 0.
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-1-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Positivo K116J is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250707114537.8291-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We will copy calibration data from position behind to front.
We have created a variable (tmp_val) point on top of calibration data
buffer, and tmp_val[1] is max of node number in original calibration
data structure, it will be overwritten after first data copy,
so can't be used as max node number check in for loop.
So we create a new variable to save max of node number (tmp_val[1]),
used to check if max node number was reached in for loop.
And a point need to be increased to point at calibration data in node.
Data saved position also need to be increased one byte.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250707090513.1462-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After enabling the clocks each error path must disable the clocks again.
One of them failed to do so. Unify the error paths to use goto to make it
harder for future changes to add a similar bug.
Fixes: 7ca59947b5fc ("pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172728.626815-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Commit 9dd42d019e63 ("pwm: Allow pwm state transitions from an invalid
state") intended to allow some state transitions that were not allowed
before. The idea is sane and back then I also got the code comment
right, but the check for enabled is bogus. This resulted in state
transitions for enabled states to be allowed to have invalid duty/period
settings and thus it can happen that low-level drivers get requests for
invalid states🙄.
Invert the check to allow state transitions for disabled states only.
Fixes: 9dd42d019e63 ("pwm: Allow pwm state transitions from an invalid state")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172416.626433-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
|
|
Pull /proc/sys dcache lookup fix from Al Viro:
"Fix for the breakage spotted by Neil in the interplay between
/proc/sys ->d_compare() weirdness and parallel lookups"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix proc_sys_compare() handling of in-lookup dentries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix the calculation of the deadline server task's runtime as this
mishap was preventing realtime tasks from running
- Avoid a race condition during migrate-swapping two tasks
- Fix the string reported for the "none" dynamic preemption option
* tag 'sched_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix dl_server runtime calculation formula
sched/core: Fix migrate_swap() vs. hotplug
sched: Fix preemption string of preempt_dynamic_none
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Fix the compilation of an x86 kernel on a big engian machine due to a
missed endianness conversion
* tag 'objtool_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add missing endian conversion to read_annotate()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Revert uprobes to using CAP_SYS_ADMIN again as currently they can
destructively modify kernel code from an unprivileged process
- Move a warning to where it belongs
* tag 'perf_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Revert to requiring CAP_SYS_ADMIN for uprobes
perf/core: Fix the WARN_ON_ONCE is out of lock protected region
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Make sure AMD SEV guests using secure TSC, include a TSC_FACTOR which
prevents their TSCs from going skewed from the hypervisor's
* tag 'x86_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Use TSC_FACTOR for Secure TSC frequency calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Disable FUTEX_PRIVATE_HASH for this cycle due to a performance
regression
- Add a selftests compilation product to the corresponding .gitignore
file
* tag 'locking_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Add futex_numa to .gitignore
futex: Temporary disable FUTEX_PRIVATE_HASH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Initialize sysfs attributes properly to avoid lockdep complaining
about an uninitialized lock class
* tag 'edac_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Initialize EDAC features sysfs attributes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixes from Borislav Petkov:
- Do not remove the MCE sysfs hierarchy if thresholding sysfs nodes
init fails due to new/unknown banks present, which in itself is not
fatal anyway; add default names for new banks
- Make sure MCE polling settings are honored after CMCI storms
- Make sure MCE threshold limit is reset after the thresholding
interrupt has been serviced
- Clean up properly and disable CMCI banks on shutdown so that a
second/kexec-ed kernel can rediscover those banks again
* tag 'ras_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure CMCI banks are cleared during shutdown on Intel
x86/mce/amd: Fix threshold limit reset
x86/mce/amd: Add default names for MCA banks and blocks
x86/mce: Ensure user polling settings are honored when restarting timer
x86/mce: Don't remove sysfs if thresholding sysfs init fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Have irq-msi-lib select CONFIG_GENERIC_MSI_IRQ explicitly as it uses
its facilities
* tag 'irq_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Select CONFIG_GENERIC_MSI_IRQ
|
|
futex_numa was never added to the .gitignore file.
Add it.
Fixes: 9140f57c1c13 ("futex,selftests: Add another FUTEX2_NUMA selftest")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20250704103749.10341-1-terry.tritton@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- Memory corruption fixes in hid-appletb-kbd driver (Qasim Ijaz)
- New device ID in hid-elecom driver (Leonard Dizon)
- Fixed several HID debugfs contants (Vicki Pfau)
* tag 'hid-for-linus-2025070502' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe
HID: Fix debug name for BTN_GEAR_DOWN, BTN_GEAR_UP, BTN_WHEEL
HID: elecom: add support for ELECOM HUGE 019B variant
HID: appletb-kbd: fix memory corruption of input_handler_list
|
|
Pull smb client fixes from Steve French:
- Two reconnect fixes including one for a reboot/reconnect race
- Fix for incorrect file type that can be returned by SMB3.1.1 POSIX
extensions
- tcon initialization fix
- Fix for resolving Windows symlinks with absolute paths
* tag 'v6.16-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix native SMB symlink traversal
smb: client: fix race condition in negotiate timeout by using more precise timing
cifs: all initializations for tcon should happen in tcon_info_alloc
smb: client: fix warning when reconnecting channel
smb: client: fix readdir returning wrong type with POSIX extensions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- designware: initialise msg_write_idx during transfer
- microchip: check return value from core xfer call
- realtek: add 'reg' property constraint to the device tree
* tag 'i2c-for-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: realtek,rtl9301: Fix missing 'reg' constraint
i2c: microchip-core: re-fix fake detections w/ i2cdetect
i2c/designware: Fix an initialization issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address system suspend failures under memory pressure in some
configurations, fix up RAPL handling on platforms where PL1 cannot be
disabled, and fix a documentation typo:
- Prevent the Intel RAPL power capping driver from allowing PL1 to be
exceeded by mistake on systems when PL1 cannot be disabled (Zhang
Rui)
- Fix a typo in the ABI documentation (Sumanth Gavini)
- Allow swap to be used a bit longer during system suspend and
hibernation to avoid suspend failures under memory pressure (Mario
Limonciello)"
* tag 'pm-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: docs: Replace "diasble" with "disable"
powercap: intel_rapl: Do not change CLAMPING bit if ENABLE bit cannot be changed
PM: Restrict swap use to later in the suspend sequence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a problematic ACPI battery driver change merged recently"
* tag 'acpi-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: battery: negate current when discharging"
|
|
Merge fixes related to system sleep for 6.16-rc5:
- Fix typo in the ABI documentation (Sumanth Gavini).
- Allow swap to be used a bit longer during system suspend and
hibernation to avoid suspend failures under memory pressure (Mario
Limonciello).
* pm-sleep:
PM: sleep: docs: Replace "diasble" with "disable"
PM: Restrict swap use to later in the suspend sequence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A couple of fixes for firmware drivers have come up, addressing kernel
side bugs in op-tee and ff-a code, as well as compatibility issues
with exynos-acpm and ff-a protocols.
The only devicetree fixes are for the Apple platform, addressing
issues with conformance to the bindings for the wlan, spi and mipi
nodes"
* tag 'soc-fixes-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: apple: Move touchbar mipi {address,size}-cells from dtsi to dts
arm64: dts: apple: Drop {address,size}-cells from SPI NOR
arm64: dts: apple: t8103: Fix PCIe BCM4377 nodename
optee: ffa: fix sleep in atomic context
firmware: exynos-acpm: fix timeouts on xfers handling
arm64: defconfig: update renamed PHY_SNPS_EUSB2
firmware: arm_ffa: Fix the missing entry in struct ffa_indirect_msg_hdr
firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic context
firmware: arm_ffa: Move memory allocation outside the mutex locking
firmware: arm_ffa: Fix memory leak by freeing notifier callback node
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- kCFI is restricted to clang-17 or newer, as earlier versions have
known bugs
- sbi_hsm_hart_start is now staticly allocated, to avoid tripping up
the SBI HSM page mapping on sparse systems.
* tag 'riscv-for-linus-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: cpu_ops_sbi: Use static array for boot_data
riscv: Require clang-17 or newer for kCFI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver fixes (the GPIO one being potentially nasty, though it
has been there for a while without anyone reporting it), and one core
fix for the rarely used combination of coupled regulators and
unbinding"
* tag 'regulator-fix-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods
regulator: mp886x: Fix ID table driver_data
regulator: sy8824x: Fix ID table driver_data
regulator: tps65219: Fix devm_kmalloc size allocation
regulator: core: fix NULL dereference on unbind due to stale coupling data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"As well as a few driver specific fixes we've got a core change here
which raises the hard coded limit on the number of devices we can
support on one SPI bus since some FPGA based systems are running into
the existing limit. This is not a good solution but it's one suitable
for this point in the release cycle, we should dynamically size the
relevant data structures which I hope will happen in the next couple
of merge windows.
We also pull in a MTD fix for the Qualcomm SNAND driver, the two fixes
cover the same issue and merging them together minimises bisection
issues"
* tag 'spi-fix-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: fix cleanup of rx_chan on failure paths
spi: spi-fsl-dspi: Clear completion counter before initiating transfer
spi: Raise limit on number of chip selects to 24
mtd: nand: qpic_common: prevent out of bounds access of BAM arrays
spi: spi-qpic-snand: reallocate BAM transactions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Mostly a few lines fixed here and there except amd/isp4 which improves
swnodes relationships but that is a new driver not in any stable
kernels yet. The think-lmi driver changes also look relatively large
but there are just many fixes to it.
The i2c/piix4 change is a effectively a revert of the commit
7e173eb82ae9 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on
CONFIG_X86") but that required moving the header out from arch/x86
under include/linux/platform_data/
Summary:
- amd/isp4: Improve swnode graph (new driver exception)
- asus-nb-wmi: Use duo keyboard quirk for Zenbook Duo UX8406CA
- dell-lis3lv02d: Add Latitude 5500 accelerometer address
- dell-wmi-sysman: Fix WMI data block retrieval and class dev unreg
- hp-bioscfg: Fix class device unregistration
- i2c: piix4: Re-enable on non-x86 + move FCH header under platform_data/
- intel/hid: Wildcat Lake support
- mellanox:
- mlxbf-pmc: Fix duplicate event ID
- mlxbf-tmfifo: Fix vring_desc.len assignment
- mlxreg-lc: Fix bit-not-set logic check
- nvsw-sn2201: Fix bus number in error message & spelling errors
- portwell-ec: Move watchdog device under correct platform hierarchy
- think-lmi: Error handling fixes (sysfs, kset, kobject, class dev unreg)
- thinkpad_acpi: Handle HKEY 0x1402 event (2025 Thinkpads)
- wmi: Fix WMI event enablement"
* tag 'platform-drivers-x86-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: think-lmi: Fix sysfs group cleanup
platform/x86: think-lmi: Fix kobject cleanup
platform/x86: think-lmi: Create ksets consecutively
platform/mellanox: mlxreg-lc: Fix logic error in power state check
i2c: Re-enable piix4 driver on non-x86
Move FCH header to a location accessible by all archs
platform/x86/intel/hid: Add Wildcat Lake support
platform/x86: dell-wmi-sysman: Fix class device unregistration
platform/x86: think-lmi: Fix class device unregistration
platform/x86: hp-bioscfg: Fix class device unregistration
platform/x86: Update swnode graph for amd isp4
platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks
platform/x86: wmi: Update documentation of WCxx/WExx ACPI methods
platform/x86: wmi: Fix WMI event enablement
platform/mellanox: nvsw-sn2201: Fix bus number in adapter error message
platform/mellanox: Fix spelling and comment clarity in Mellanox drivers
platform/mellanox: mlxbf-pmc: Fix duplicate event ID for CACHE_DATA1
platform/x86: thinkpad_acpi: handle HKEY 0x1402 event
platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CA
platform/x86: dell-lis3lv02d: Add Latitude 5500
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver fixes for 6.16-rc5. I originally wanted this
to get into -rc4, but there were some regressions that had to be
handled first. Now all looks good. Included in here are the following
fixes:
- cdns3 driver fixes
- xhci driver fixes
- typec driver fixes
- USB hub fixes (this is what took the longest to get right)
- new USB driver quirks added
- chipidea driver fixes
All of these have been in linux-next for a while and now we have no
more reported problems with them"
* tag 'usb-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: hub: Fix flushing of delayed work used for post resume purposes
xhci: dbc: Flush queued requests before stopping dbc
xhci: dbctty: disable ECHO flag by default
xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS
usb: xhci: quirk for data loss in ISOC transfers
usb: dwc3: gadget: Fix TRB reclaim logic for short transfers and ZLPs
usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm
usb: typec: displayport: Fix potential deadlock
usb: typec: altmodes/displayport: do not index invalid pin_assignments
usb: cdnsp: Fix issue with CV Bad Descriptor test
usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach
Revert "usb: xhci: Implement xhci_handshake_check_state() helper"
usb: xhci: Skip xhci_reset in xhci_resume if xhci is being removed
usb: gadget: u_serial: Fix race condition in TTY wakeup
Revert "usb: gadget: u_serial: Add null pointer check in gs_start_io"
usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume
usb: acpi: fix device link removal
usb: hub: fix detection of high tier USB3 devices behind suspended hubs
Logitech C-270 even more broken
usb: dwc3: Abort suspend on soft disconnect failure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, bit of a bumper crop, the usual amdgpu/xe/i915
suspects, then there is a large scattering of fixes across core and
drivers. I think the simple panel lookup fix is probably the largest,
the sched race fix is also fun, but I don't see anything standing out
too badly.
dma-buf:
- fix timeout handling
gem:
- fix framebuffer object references
sched:
- fix spsc queue job count race
bridge:
- fix aux hpd bridge of node
- panel: move missing flag handling
- samsung-dsim: fix %pK usage to %p
panel:
- fix problem with simple panel lookup
ttm:
- fix error path handling
amdgpu:
- SDMA 5.x reset fix
- Add missing firmware declaration
- Fix leak in amdgpu_ctx_mgr_entity_fini()
- Freesync fix
- OLED backlight fix
amdkfd:
- mtype fix for ext coherent system memory
- MMU notifier fix
- gfx7/8 fix
xe:
- Fix chunking the PTE updates and overflowing the maximum number of
dwords with with MI_STORE_DATA_IMM
- Move WA BB to the LRC BO to mitigate hangs on context switch
- Fix frequency/flush WAs for BMG
- Fix kconfig prompt title and description
- Do not require kunit
- Extend 14018094691 WA to BMG
- Fix wedging the device on signal
i915:
- Make mei interrupt top half irq disabled to fix RT builds
- Fix timeline left held on VMA alloc error
- Fix NULL pointer deref in vlv_dphy_param_init()
- Fix selftest mock_request() to avoid NULL deref
exynos:
- switch to using %p instead of %pK
- fix vblank NULL ptr race
- fix lockup on samsung peach-pit/pi chromebooks
vesadrm:
- NULL ptr fix
vmwgfx:
- fix encrypted memory allocation bug
v3d:
- fix irq enabled during reset"
* tag 'drm-fixes-2025-07-04' of https://gitlab.freedesktop.org/drm/kernel: (41 commits)
drm/xe: Do not wedge device on killed exec queues
drm/xe: Extend WA 14018094691 to BMG
drm/v3d: Disable interrupts before resetting the GPU
drm/gem: Acquire references on GEM handles for framebuffers
drm/sched: Increment job count before swapping tail spsc queue
drm/xe: Allow dropping kunit dependency as built-in
drm/xe: Fix kconfig prompt
drm/xe/bmg: Update Wa_22019338487
drm/xe/bmg: Update Wa_14022085890
drm/xe: Split xe_device_td_flush()
drm/xe/xe_guc_pc: Lock once to update stashed frequencies
drm/xe/guc_pc: Add _locked variant for min/max freq
drm/xe: Make WA BB part of LRC BO
drm/xe: Fix out-of-bounds field write in MI_STORE_DATA_IMM
drm/i915/gsc: mei interrupt top half should be in irq disabled context
drm/i915/gt: Fix timeline left held on VMA alloc error
drm/vmwgfx: Fix guests running with TDX/SEV
drm/amd/display: Don't allow OLED to go down to fully off
drm/amd/display: Added case for when RR equals panel's max RR using freesync
drm/amdkfd: add hqd_sdma_get_doorbell callbacks for gfx7/8
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Rockchip: fix infinite loop caused by probing race condition
- Intel VT-d: assign devtlb cache tag on ATS enablement
* tag 'iommu-fixes-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Assign devtlb cache tag on ATS enablement
iommu/rockchip: prevent iommus dead loop when two masters share one IOMMU
|
|
Pull block fixes from Jens Axboe:
- NVMe fixes via Christoph:
- fix incorrect cdw15 value in passthru error logging (Alok Tiwari)
- fix memory leak of bio integrity in nvmet (Dmitry Bogdanov)
- refresh visible attrs after being checked (Eugen Hristev)
- fix suspicious RCU usage warning in the multipath code (Geliang Tang)
- correctly account for namespace head reference counter (Nilay Shroff)
- Fix for a regression introduced in ublk in this cycle, where it would
attempt to queue a canceled request.
- brd RCU sleeping fix, also introduced in this cycle. Bare bones fix,
should be improved upon for the next release.
* tag 'block-6.16-20250704' of git://git.kernel.dk/linux:
brd: fix sleeping function called from invalid context in brd_insert_page()
ublk: don't queue request if the associated uring_cmd is canceled
nvme-multipath: fix suspicious RCU usage warning
nvme-pci: refresh visible attrs after being checked
nvmet: fix memory leak of bio integrity
nvme: correctly account for namespace head reference counter
nvme: Fix incorrect cdw15 value in passthru error logging
|
