summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-11arm64: dts: rockchip: fix cts, rts pin assign of UART3 for rk3399Katsuhiro Suzuki
This patch fixes pin assign of cts and rts signal of UART3. Currently GPIO3_C2 and C3 pins are assigned but TRM says that GPIO3_C0 and C1 are correct. Refer: RK3399 TRM v1.4 - Table 19-1 UART Interface Description Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11arm64: dts: rockchip: bulk convert gpios to their constant counterpartsHeiko Stuebner
Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Suggested-by: Emil Renner Berthing <esmil@mailme.dk> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Acked-by: Robin Murphy <robin.murphy@arm.com>
2019-04-11arm64: dts: rockchip: enable display nodes on rk3328-roc-ccLeonidas P. Papadakos
Enable necessary nodes to get output on the hdmi port of the board. This is a port of Heiko's patch for the rock64. Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11arm64: dts: rockchip: eMMC additions for rk3328-roc-ccLeonidas P. Papadakos
The eMMC 5.x that Libre Computer provide for their boards supports HS200 mode. The support is already included in the dts for their newest board: La Frite (AML-S805X-AC) dts: arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts That same eMMC is supported in the ROC-RK3328-CC: https://www.loverpi.com/products/libre-computer-board-emmc-5-x-module This increases the speed of the eMMC significantly. Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com> [added supplies as suggested by Leonidas] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-27arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-pumaChristoph Muellner
The RK3399-Q7 (Puma) requires 33 Ohm drive strength to ensure signal integrity at HS-400 (200MHz clock, DDR signalling). A repeated EMC testing run validates that this increase does not negatively impact EMC compliance (emissions have ample distance to the regulatory limits). Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-27arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy.Christoph Muellner
A previous patch introduced the property 'drive-impedance-ohm' for the RK3399's emmc phy node. This patch sets this value explicitly to the default value of 50 Ohm. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-27arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller.Christoph Muellner
When using direct commands (DCMDs) on an RK3399, we get spurious CQE completion interrupts for the DCMD transaction slot (#31): [ 931.196520] ------------[ cut here ]------------ [ 931.201702] mmc1: cqhci: spurious TCN for tag 31 [ 931.206906] WARNING: CPU: 0 PID: 1433 at /usr/src/kernel/drivers/mmc/host/cqhci.c:725 cqhci_irq+0x2e4/0x490 [ 931.206909] Modules linked in: [ 931.206918] CPU: 0 PID: 1433 Comm: irq/29-mmc1 Not tainted 4.19.8-rt6-funkadelic #1 [ 931.206920] Hardware name: Theobroma Systems RK3399-Q7 SoM (DT) [ 931.206924] pstate: 40000005 (nZcv daif -PAN -UAO) [ 931.206927] pc : cqhci_irq+0x2e4/0x490 [ 931.206931] lr : cqhci_irq+0x2e4/0x490 [ 931.206933] sp : ffff00000e54bc80 [ 931.206934] x29: ffff00000e54bc80 x28: 0000000000000000 [ 931.206939] x27: 0000000000000001 x26: ffff000008f217e8 [ 931.206944] x25: ffff8000f02ef030 x24: ffff0000091417b0 [ 931.206948] x23: ffff0000090aa000 x22: ffff8000f008b000 [ 931.206953] x21: 0000000000000002 x20: 000000000000001f [ 931.206957] x19: ffff8000f02ef018 x18: ffffffffffffffff [ 931.206961] x17: 0000000000000000 x16: 0000000000000000 [ 931.206966] x15: ffff0000090aa6c8 x14: 0720072007200720 [ 931.206970] x13: 0720072007200720 x12: 0720072007200720 [ 931.206975] x11: 0720072007200720 x10: 0720072007200720 [ 931.206980] x9 : 0720072007200720 x8 : 0720072007200720 [ 931.206984] x7 : 0720073107330720 x6 : 00000000000005a0 [ 931.206988] x5 : ffff00000860d4b0 x4 : 0000000000000000 [ 931.206993] x3 : 0000000000000001 x2 : 0000000000000001 [ 931.206997] x1 : 1bde3a91b0d4d900 x0 : 0000000000000000 [ 931.207001] Call trace: [ 931.207005] cqhci_irq+0x2e4/0x490 [ 931.207009] sdhci_arasan_cqhci_irq+0x5c/0x90 [ 931.207013] sdhci_irq+0x98/0x930 [ 931.207019] irq_forced_thread_fn+0x2c/0xa0 [ 931.207023] irq_thread+0x114/0x1c0 [ 931.207027] kthread+0x128/0x130 [ 931.207032] ret_from_fork+0x10/0x20 [ 931.207035] ---[ end trace 0000000000000002 ]--- The driver shows this message only for the first spurious interrupt by using WARN_ONCE(). Changing this to WARN() shows, that this is happening quite frequently (up to once a second). Since the eMMC 5.1 specification, where CQE and CQHCI are specified, does not mention that spurious TCN interrupts for DCMDs can be simply ignored, we must assume that using this feature is not working reliably. The current implementation uses DCMD for REQ_OP_FLUSH only, and I could not see any performance/power impact when disabling this optional feature for RK3399. Therefore this patch disables DCMDs for RK3399. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: stable@vger.kernel.org [the corresponding code changes are queued for 5.2 so doing that as well] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: Add nanopi4 ethernet phyRobin Murphy
The nanopi4 boards have the INTB pin of the RTL8211E phy wired up, so we can make use of that and avoid having to poll for line status changes. Apparently RTL8211E only requires 30ms of post-reset delay, so we may as well save a little bit of time there as well. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: Add PWM fan for NanoPC-T4Robin Murphy
NanoPC-T4 has a dedicated circuit for driving a 12V fan from PWM1, so let's add that along with some rough empirically-derived thermal settings for the benefit of anyone determined enough to hook one up. The vendor does not currently offer a suitable fan, but this seems as good a place as any to note that pre-terminated 3-pin JST GH connectors are readily available online, and if you even have to ask, then splicing one of those really will be orders of magnitude cheaper and simpler than getting set up to crimp the teeny-tiny things by hand. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepiAlexis Ballier
Also rename its regulator to match the schematic names. Signed-off-by: Alexis Ballier <aballier@gentoo.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass ↵Alexis Ballier
(AK09911) Despite this not being mentioned in the binding documentation, this generates a log at boot about it being missing. Signed-off-by: Alexis Ballier <aballier@gentoo.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth ↵Alexis Ballier
on rk3399-orangepi Clock name was wrong, vbat & vddio supplies were missing. Signed-off-by: Alexis Ballier <aballier@gentoo.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficusJagan Teki
12V DCIN regulator is root source supply for the rest of regulators in Rock960 power diagram. Add support for it and attach same to supply vcc5v0_sys. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960Jagan Teki
It is always better practice to follow regulator naming conventions as per the schematics for future references. So, rename vcc_sys into vcc5v0_sys as per rk3399 power diagram of rock960 schematics. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: Add Nanopi NEO4 initial supportJagan Teki
FriendlyElec NanoPi NEO4 is known to be a revision 4 based NanoPi4 series of boards. Most of know peripherals are shared between Nanopi M4 vs NEO4, except - 1GB DDR3 - USB Host ports - Missing DSI port - USB 2.0 Host with USB2PHY0 (no USB2PH1) Add support for it, by reusing existing rk3399-nanopi4.dtsi Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Akash Gajjar <akash@openedev.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64Katsuhiro Suzuki
The rockpro64 has hdmi support. So this patch enables hdmi audio feature that is defined in rk3399 devicetree. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: Add support for the Orange Pi RK3399 board.Alexis Ballier
This adds basic support for the Orange Pi RK3399 board. What works: - SD card / emmc. - Debug UART - Ethernet - USB: Type C, internal USB3 for SATA, 4 USB 2.0 ports - Sensors: All of them but the Hall sensor. - Buttons - Wifi, Bluetooth - HDMI out Signed-off-by: Alexis Ballier <aballier@gentoo.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: enable mali on rock960 boardsEzequiel Garcia
Enable the mali gpu node. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: enable mali on Rock Pi 4Ezequiel Garcia
Enable the mali gpu node. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodesLeonidas P. Papadakos
In line with the rock64 dts, specify the cpu-supply for the other cpus as well Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: give some life to the rk3328-roc-cc ledsLeonidas P. Papadakos
Assign the LEDs to heartbeat and sdcard io, as in other RK boards. https://github.com/armbian/build/commit/f1affad5c7be62d6e93832af3556c7609edd0858 Suggested-by: Juan Cano <j3cano@outlook.com> Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328Katsuhiro Suzuki
This patch adds #sound-dai-cells to use HDMI node as audio codec from device tree of rk3328 boards. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: add ir-receiver node on rk3328-rock64Jonas Karlman
Add ir-receiver node to enable on-board IR on Rock64. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: add leds node on rk3328-rock64Jonas Karlman
Add led nodes on Rock64. Use heartbeat trigger for the red standby led and use mmc0 trigger for the white power led. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: fix regulator name on rk3328-rock64Jonas Karlman
Update regulator-name to match node and schematics. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: enable HDMI CEC on rk3328Jonas Karlman
This patch enables HDMI CEC on RK3328 devices. (Unusual) source for the cec clock is taken from the vendor kernel. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18arm64: dts: rockchip: Add capacity-dmips-mhz attributes to rk3399Marc Zyngier
The RK3399 has the interesting property to be a so called "big-little" system, where not all the CPUs are equal (the A53s are much weaker than the A72s). So far, we're not telling the OS that there is such a difference in processing capacity, and Linux assumes that they are equal. Too bad. Let's tell the OS about this by using the capacity-dmips-mhz property. The values used here are those used on the Juno platform, which is quite similar. This leads to the scheduler knowing that it can pack more tasks on the A72s, and leads to a better interactive experience. Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-17Linux 5.1-rc1v5.1-rc1Linus Torvalds
2019-03-17Merge tag 'kbuild-v5.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
2019-03-17Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Thomas Gleixner: "Two cleanup patches removing dead conditionals and unused code" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Remove unused __constant_c_x_memset() macro and inlines x86/asm: Remove dead __GNUC__ conditionals
2019-03-17Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Three fixes for the fallout from the TSX errata workaround: - Prevent memory corruption caused by a unchecked out of bound array index. - Two trivial fixes to address compiler warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Make dev_attr_allow_tsx_force_abort static perf/x86: Fixup typo in stub functions perf/x86/intel: Fix memory corruption
2019-03-17Merge tag 'for-linus-5.1b-rc1b-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A fix for a Xen bug introduced by David's series for excluding ballooned pages in vmcores" * tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Fix mapping PG_offline pages to user space
2019-03-17Merge tag '9p-for-5.1' of git://github.com/martinetd/linuxLinus Torvalds
Pull 9p updates from Dominique Martinet: "Here is a 9p update for 5.1; there honestly hasn't been much. Two fixes (leak on invalid mount argument and possible deadlock on i_size update on 32bit smp) and a fall-through warning cleanup" * tag '9p-for-5.1' of git://github.com/martinetd/linux: 9p/net: fix memory leak in p9_client_create 9p: use inode->i_lock to protect i_size_write() under 32-bit 9p: mark expected switch fall-through
2019-03-17perf/x86/intel: Make dev_attr_allow_tsx_force_abort statickbuild test robot
Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
2019-03-17kconfig: remove stale lxdialog/.gitignoreMasahiro Yamada
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: force all architectures except um to include mandatory-yMasahiro Yamada
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: warn redundant generic-yMasahiro Yamada
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17Revert "modsign: Abort modules_install when signing fails"Douglas Anderson
This reverts commit caf6fe91ddf62a96401e21e9b7a07227440f4185. The commit was fine but is no longer needed as of commit 3a2429e1faf4 ("kbuild: change if_changed_rule for multi-line recipe"). Let's go back to using ";" to be consistent. For some discussion, see: https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.com Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: Make NOSTDINC_FLAGS a simply expanded variableDouglas Anderson
During a simple no-op (nothing changed) build I saw 39 invocations of the C compiler with the argument "-print-file-name=include". We don't need to call the C compiler 39 times for this--one time will suffice. Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid this since there doesn't appear to be any reason it should be recursively expanded. On my build this shaved ~400 ms off my "no-op" build. Note that the recursive expansion seems to date back to the (really old) commit e8f5bdb02ce0 ("[PATCH] Makefile include path ordering"). It's a little unclear to me if the point of that patch was to switch the variable to be recursively expanded (which it did) or to avoid directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because someone else (out of tree?) was setting it. I presume later since if the only goal was to switch to recursive expansion the patch would have just removed the ":". Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: deb-pkg: avoid implicit effectsArseny Maslennikov
* The man page for dpkg-source(1) notes: > -b, --build directory [format-specific-parameters] > Build a source package (--build since dpkg 1.17.14). > <...> > > dpkg-source will build the source package with the first > format found in this ordered list: the format indicated > with the --format command line option, the format > indicated in debian/source/format, “1.0”. The fallback > to “1.0” is deprecated and will be removed at some point > in the future, you should always document the desired > source format in debian/source/format. See section > SOURCE PACKAGE FORMATS for an extensive description of > the various source package formats. Thus it would be more foolproof to explicitly use 1.0 (as we always did) than to rely on dpkg-source's defaults. * In a similar vein, debian/rules is not made executable by mkdebian, and dpkg-source warns about that but still silently fixes the file. Let's be explicit once again. Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17coccinelle: semantic code search for missing put_device()Wen Yang
The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. The implementation of this semantic code search is: In a function, for a local variable returned by calling of_find_device_by_node(), a, if it is released by a function such as put_device()/of_dev_put()/platform_device_put() after the last use, it is considered that there is no reference leak; b, if it is passed back to the caller via dev_get_drvdata()/platform_get_drvdata()/get_device(), etc., the reference will be released in other functions, and the current function also considers that there is no reference leak; c, for the rest of the situation, the current function should release the reference by calling put_device, this code search will report the corresponding error message. By using this semantic code search, we have found some object reference leaks, such as: commit 11907e9d3533 ("ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe") commit a12085d13997 ("mtd: rawnand: atmel: fix possible object reference leak") commit 11493f26856a ("mtd: rawnand: jz4780: fix possible object reference leak") There are still dozens of reference leaks in the current kernel code. Further, for the case of b, the object returned to other functions may also have a reference leak, we will continue to develop other cocci scripts to further check the reference leak. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-16Merge tag 'pidfd-v5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd system call from Christian Brauner: "This introduces the ability to use file descriptors from /proc/<pid>/ as stable handles on struct pid. Even if a pid is recycled the handle will not change. For a start these fds can be used to send signals to the processes they refer to. With the ability to use /proc/<pid> fds as stable handles on struct pid we can fix a long-standing issue where after a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. With this patchset we enable a variety of use cases. One obvious example is that we can now safely delegate an important part of process management - sending signals - to processes other than the parent of a given process by sending file descriptors around via scm rights and not fearing that the given process will have been recycled in the meantime. It also allows for easy testing whether a given process is still alive or not by sending signal 0 to a pidfd which is quite handy. There has been some interest in this feature e.g. from systems management (systemd, glibc) and container managers. I have requested and gotten comments from glibc to make sure that this syscall is suitable for their needs as well. In the future I expect it to take on most other pid-based signal syscalls. But such features are left for the future once they are needed. This has been sitting in linux-next for quite a while and has not caused any issues. It comes with selftests which verify basic functionality and also test that a recycled pid cannot be signaled via a pidfd. Jon has written about a prior version of this patchset. It should cover the basic functionality since not a lot has changed since then: https://lwn.net/Articles/773459/ The commit message for the syscall itself is extensively documenting the syscall, including it's functionality and extensibility" * tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests: add tests for pidfd_send_signal() signal: add pidfd_send_signal() syscall
2019-03-16Merge tag 'devdax-for-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull device-dax updates from Dan Williams: "New device-dax infrastructure to allow persistent memory and other "reserved" / performance differentiated memories, to be assigned to the core-mm as "System RAM". Some users want to use persistent memory as additional volatile memory. They are willing to cope with potential performance differences, for example between DRAM and 3D Xpoint, and want to use typical Linux memory management apis rather than a userspace memory allocator layered over an mmap() of a dax file. The administration model is to decide how much Persistent Memory (pmem) to use as System RAM, create a device-dax-mode namespace of that size, and then assign it to the core-mm. The rationale for device-dax is that it is a generic memory-mapping driver that can be layered over any "special purpose" memory, not just pmem. On subsequent boots udev rules can be used to restore the memory assignment. One implication of using pmem as RAM is that mlock() no longer keeps data off persistent media. For this reason it is recommended to enable NVDIMM Security (previously merged for 5.0) to encrypt pmem contents at rest. We considered making this recommendation an actively enforced requirement, but in the end decided to leave it as a distribution / administrator policy to allow for emulation and test environments that lack security capable NVDIMMs. Summary: - Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. - Allow for an alternative driver for the device-dax address-range - Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. - Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis" NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because we currently have special - and very annoying rules in the kernel about accessing PMEM only with the "MC safe" accessors, because machine checks inside the regular repeat string copy functions can be fatal in some (not described) circumstances. And apparently the PMEM modules can cause that a lot more than regular RAM. The argument is that this happens because PMEM doesn't necessarily get scrubbed at boot like RAM does, but that is planned to be added for the user space tooling. Quoting Dan from another email: "The exposure can be reduced in the volatile-RAM case by scanning for and clearing errors before it is onlined as RAM. The userspace tooling for that can be in place before v5.1-final. There's also runtime notifications of errors via acpi_nfit_uc_error_notify() from background scrubbers on the DIMM devices. With that mechanism the kernel could proactively clear newly discovered poison in the volatile case, but that would be additional development more suitable for v5.2. I understand the concern, and the need to highlight this issue by tapping the brakes on feature development, but I don't see PMEM as RAM making the situation worse when the exposure is also there via DAX in the PMEM case. Volatile-RAM is arguably a safer use case since it's possible to repair pages where the persistent case needs active application coordination" * tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: "Hotplug" persistent memory for use like normal RAM mm/resource: Let walk_system_ram_range() search child resources mm/memory-hotplug: Allow memory resources to be children mm/resource: Move HMM pr_debug() deeper into resource code mm/resource: Return real error codes from walk failures device-dax: Add a 'modalias' attribute to DAX 'bus' devices device-dax: Add a 'target_node' attribute device-dax: Auto-bind device after successful new_id acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node device-dax: Add /sys/class/dax backwards compatibility device-dax: Add support for a dax override driver device-dax: Move resource pinning+mapping into the common driver device-dax: Introduce bus + driver model device-dax: Start defining a dax bus model device-dax: Remove multi-resource infrastructure device-dax: Kill dax_region base device-dax: Kill dax_region ida
2019-03-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is the final round of mostly small fixes and performance improvements to our initial submit. The main regression fix is the ia64 simscsi build failure which was missed in the serial number elimination conversion" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: ia64: simscsi: use request tag instead of serial_number scsi: aacraid: Fix performance issue on logical drives scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() scsi: libiscsi: Hold back_lock when calling iscsi_complete_task scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port scsi: hisi_sas: Set PHY linkrate when disconnected scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO scsi: hisi_sas: Change return variable type in phy_up_v3_hw() scsi: qla2xxx: check for kstrtol() failure scsi: lpfc: fix 32-bit format string warning scsi: lpfc: fix unused variable warning scsi: target: tcmu: Switch to bitmap_zalloc() scsi: libiscsi: fall back to sendmsg for slab pages scsi: qla2xxx: avoid printf format warning scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check scsi: ufs: hisi: fix ufs_hba_variant_ops passing scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show ...
2019-03-16Merge tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more block layer changes from Jens Axboe: "This is a collection of both stragglers, and fixes that came in after I finalized the initial pull. This contains: - An MD pull request from Song, with a few minor fixes - Set of NVMe patches via Christoph - Pull request from Konrad, with a few fixes for xen/blkback - pblk fix IO calculation fix (Javier) - Segment calculation fix for pass-through (Ming) - Fallthrough annotation for blkcg (Mathieu)" * tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block: (25 commits) blkcg: annotate implicit fall through nvme-tcp: support C2HData with SUCCESS flag nvmet: ignore EOPNOTSUPP for discard nvme: add proper write zeroes setup for the multipath device nvme: add proper discard setup for the multipath device nvme: remove nvme_ns_config_oncs nvme: disable Write Zeroes for qemu controllers nvmet-fc: bring Disconnect into compliance with FC-NVME spec nvmet-fc: fix issues with targetport assoc_list list walking nvme-fc: reject reconnect if io queue count is reduced to zero nvme-fc: fix numa_node when dev is null nvme-fc: use nr_phys_segments to determine existence of sgl nvme-loop: init nvmet_ctrl fatal_err_work when allocate nvme: update comment to make the code easier to read nvme: put ns_head ref if namespace fails allocation nvme-trace: fix cdw10 buffer overrun nvme: don't warn on block content change effects nvme: add get-feature to admin cmds tracer md: Fix failed allocation of md_register_thread It's wrong to add len to sector_nr in raid10 reshape twice ...
2019-03-16Merge tag 'nfs-for-5.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfixes: - Fix an Oops in SUNRPC back channel tracepoints - Fix a SUNRPC client regression when handling oversized replies - Fix the minimal size for SUNRPC reply buffer allocation - rpc_decode_header() must always return a non-zero value on error - Fix a typo in pnfs_update_layout() Cleanup: - Remove redundant check for the reply length in call_decode()" * tag 'nfs-for-5.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Remove redundant check for the reply length in call_decode() SUNRPC: Handle the SYSTEM_ERR rpc error SUNRPC: rpc_decode_header() must always return a non-zero value on error SUNRPC: Use the ENOTCONN error on socket disconnect SUNRPC: Fix the minimal size for reply buffer allocation SUNRPC: Fix a client regression when handling oversized replies pNFS: Fix a typo in pnfs_update_layout fix null pointer deref in tracepoints in back channel
2019-03-16Merge tag 'powerpc-5.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix to prevent runtime allocation of 16GB pages when running in a VM (as opposed to bare metal), because it doesn't work. A small fix to our recently added KCOV support to exempt some more code from being instrumented. Plus a few minor build fixes, a small dead code removal and a defconfig update. Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Christophe Leroy, Jason Yan, Joel Stanley, Mahesh Salgaonkar, Mathieu Malaterre" * tag 'powerpc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Include <asm/nmi.h> header file to fix a warning powerpc/powernv: Fix compile without CONFIG_TRACEPOINTS powerpc/mm: Disable kcov for SLB routines powerpc: remove dead code in head_fsl_booke.S powerpc/configs: Sync skiroot defconfig powerpc/hugetlb: Don't do runtime allocation of 16G pages in LPAR configuration
2019-03-16Merge branch 'work.mount' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount infrastructure fix from Al Viro: "Fixup for sysfs braino. Capabilities checks for sysfs mount do include those on netns, but only if CONFIG_NET_NS is enabled. Sorry, should've caught that earlier..." * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix sysfs_init_fs_context() in !CONFIG_NET_NS case
2019-03-16fix sysfs_init_fs_context() in !CONFIG_NET_NS caseAl Viro
Permission checks on current's netns should be done only when netns are enabled. Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Fixes: 23bf1b6be9c2 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-15Merge tag '5.1-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull more smb3 updates from Steve French: "Various tracing and debugging improvements, crediting fixes, some cleanup, and important fallocate fix (fixes three xfstests) and lock fix. Summary: - Various additional dynamic tracing tracepoints - Debugging improvements (including ability to query the server via SMB3 fsctl from userspace tools which can help with stats and debugging) - One minor performance improvement (root directory inode caching) - Crediting (SMB3 flow control) fixes - Some cleanup (docs and to mknod) - Important fixes: one to smb3 implementation of fallocate zero range (which fixes three xfstests) and a POSIX lock fix" * tag '5.1-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: (22 commits) CIFS: fix POSIX lock leak and invalid ptr deref SMB3: Allow SMB3 FSCTL queries to be sent to server from tools cifs: fix incorrect handling of smb2_set_sparse() return in smb3_simple_falloc smb2: fix typo in definition of a few error flags CIFS: make mknod() an smb_version_op cifs: minor documentation updates cifs: remove unused value pointed out by Coverity SMB3: passthru query info doesn't check for SMB3 FSCTL passthru smb3: add dynamic tracepoints for simple fallocate and zero range cifs: fix smb3_zero_range so it can expand the file-size when required cifs: add SMB2_ioctl_init/free helpers to be used with compounding smb3: Add dynamic trace points for various compounded smb3 ops cifs: cache FILE_ALL_INFO for the shared root handle smb3: display volume serial number for shares in /proc/fs/cifs/DebugData cifs: simplify how we handle credits in compound_send_recv() smb3: add dynamic tracepoint for timeout waiting for credits smb3: display security information in /proc/fs/cifs/DebugData more accurately cifs: add a timeout argument to wait_for_free_credits cifs: prevent starvation in wait_for_free_credits for multi-credit requests cifs: wait_for_free_credits() make it possible to wait for >=1 credits ...
generated by cgit (git 2.34.1) at 2025-09-10 00:27:44 +0000